Skip to contentSkip to conversation

MFD: intel_pmt: Add general DVSEC/VSEC support

PATCH Superseded David E. Box 3 participants 9 messages Aug 17, 2021 – Aug 19, 2021

Subsystems (4)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

David E. Box

author maintainer
#0 lore raw

v2 cover MFD: intel_pmt: Add general DVSEC/VSEC support

This patch enables general support for Intel defined PCIe VSEC and DVSEC capabilities in the Intel Platform Monitoring Technology (PMT) driver. Though the driver was written exclusively for PMT capabilities, newer DVSEC and VSEC IDs for other capabilities can exist on the same device requiring that the driver handle them.

This 2nd revision drops the creation of a separate OOBMSM driver. Instead, all cell drivers will have a dependency on CONFIG_MFD_INTEL_PMT, whether or not they are PMT. Changes in this patchset to the current cell drivers located in platform/x86 are based on Hans for-next branch where they have been moved to the intel/pmt subfolder.

David E. Box (5):
PCI: Add #defines for accessing PCIE DVSEC fields
MFD: intel_pmt: Support non-PMT capabilities
MFD: intel_pmt: Add support for PCIe VSEC structures platform/x86: intel_pmt_telemetry: Ignore zero sized entries
MFD: intel_pmt: Add DG2 support

 drivers/mfd/intel_pmt.c                    | 256 +++++++++++++++------
 drivers/platform/x86/intel/pmt/class.c     |   2 +
 drivers/platform/x86/intel/pmt/crashlog.c  |   2 +-
 drivers/platform/x86/intel/pmt/telemetry.c |  10 +-
 include/uapi/linux/pci_regs.h              |   4 +
 5 files changed, 197 insertions(+), 77 deletions(-)

base-commit: ca42c119fc6746e65423257e7eddf5fc9e96edc2

Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH v2 1/5 PCI: Add #defines for accessing PCIE DVSEC fields

Add #defines for accessing Vendor ID, Revision, Length, and ID offsets in the Designated Vendor Specific Extended Capability (DVSEC). Defined in PCIe r5.0, sec 7.9.6.

---

V2: Unchanged

 include/uapi/linux/pci_regs.h | 4 ++++
 1 file changed, 4 insertions(+)
include/uapi/linux/pci_regs.h +4 -0
index e709ae8235e7..57ee51f19283 100644
@@ -1080,7 +1080,11 @@
 
 /* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */
 #define PCI_DVSEC_HEADER1		0x4 /* Designated Vendor-Specific Header1 */
+#define  PCI_DVSEC_HEADER1_VID(x)	((x) & 0xffff)
+#define  PCI_DVSEC_HEADER1_REV(x)	(((x) >> 16) & 0xf)
+#define  PCI_DVSEC_HEADER1_LEN(x)	(((x) >> 20) & 0xfff)
 #define PCI_DVSEC_HEADER2		0x8 /* Designated Vendor-Specific Header2 */
+#define  PCI_DVSEC_HEADER2_ID(x)		((x) & 0xffff)
 
 /* Data Link Feature */
 #define PCI_DLF_CAP		0x04	/* Capabilities Register */
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH v2 2/5 MFD: intel_pmt: Support non-PMT capabilities

In reply to David E. Box

Intel Platform Monitoring Technology (PMT) support is indicated by presence of an Intel defined PCIe DVSEC structure with a PMT ID. However DVSEC structures may also be used by Intel to indicate support for other capabilities unrelated to PMT. OOBMSM is a device that can have both PMT and non-PMT capabilities. In order to support these capabilities it is necessary to modify the intel_pmt driver to handle the creation of platform devices more generically.

Currently PMT devices are named by their capability (e.g. pmt_telemetry). Instead, generically name them by their capability ID (e.g. intel-extended-cap-2). This allows the IDs to be created automatically, minimizing the code needed to support future capabilities. However, to ensure that unsupported devices aren't created, use an allow list to specify supported capabilities.

---

V2: MFD changes implemented in intel_pmt.c instead of new driver.

 drivers/mfd/intel_pmt.c                    | 95 ++++++++++++++--------
 drivers/platform/x86/intel/pmt/crashlog.c  |  2 +-
 drivers/platform/x86/intel/pmt/telemetry.c |  2 +-
 3 files changed, 62 insertions(+), 37 deletions(-)
drivers/mfd/intel_pmt.c +60 -35
index dd7eb614c28e..08cd3357577e 100644
@@ -27,9 +27,18 @@
 #define INTEL_DVSEC_ENTRY_SIZE		4
 
 /* PMT capabilities */
-#define DVSEC_INTEL_ID_TELEMETRY	2
-#define DVSEC_INTEL_ID_WATCHER		3
-#define DVSEC_INTEL_ID_CRASHLOG		4
+#define INTEL_EXT_CAP_ID_TELEMETRY	2
+#define INTEL_EXT_CAP_ID_WATCHER	3
+#define INTEL_EXT_CAP_ID_CRASHLOG	4
+
+#define INTEL_EXT_CAP_PREFIX		"intel_extnd_cap"
+#define FEATURE_ID_NAME_LENGTH		25
+
+static int intel_ext_cap_allow_list[] = {
+	INTEL_EXT_CAP_ID_TELEMETRY,
+	INTEL_EXT_CAP_ID_WATCHER,
+	INTEL_EXT_CAP_ID_CRASHLOG,
+};
 
 struct intel_dvsec_header {
 	u16	length;
@@ -84,42 +93,58 @@ static const struct pmt_platform_info dg1_info = {
 	.capabilities = dg1_capabilities,
 };
 
-static int pmt_add_dev(struct pci_dev *pdev, struct intel_dvsec_header *header,
-		       unsigned long quirks)
+static bool intel_ext_cap_allowed(u16 id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(intel_ext_cap_allow_list); i++)
+		if (intel_ext_cap_allow_list[i] == id)
+			return true;
+
+	return false;
+}
+
+static bool intel_ext_cap_disabled(u16 id, unsigned long quirks)
+{
+	switch (id) {
+	case INTEL_EXT_CAP_ID_WATCHER:
+		return !!(quirks & PMT_QUIRK_NO_WATCHER);
+
+	case INTEL_EXT_CAP_ID_CRASHLOG:
+		return !!(quirks & PMT_QUIRK_NO_CRASHLOG);
+
+	default:
+		return false;
+	}
+}
+
+static int intel_ext_cap_add_dev(struct pci_dev *pdev, struct intel_dvsec_header *header,
+				 unsigned long quirks)
 {
 	struct device *dev = &pdev->dev;
 	struct resource *res, *tmp;
 	struct mfd_cell *cell;
-	const char *name;
+	char feature_id_name[FEATURE_ID_NAME_LENGTH];
 	int count = header->num_entries;
 	int size = header->entry_size;
 	int id = header->id;
 	int i;
 
-	switch (id) {
-	case DVSEC_INTEL_ID_TELEMETRY:
-		name = "pmt_telemetry";
-		break;
-	case DVSEC_INTEL_ID_WATCHER:
-		if (quirks & PMT_QUIRK_NO_WATCHER) {
-			dev_info(dev, "Watcher not supported\n");
-			return -EINVAL;
-		}
-		name = "pmt_watcher";
-		break;
-	case DVSEC_INTEL_ID_CRASHLOG:
-		if (quirks & PMT_QUIRK_NO_CRASHLOG) {
-			dev_info(dev, "Crashlog not supported\n");
-			return -EINVAL;
-		}
-		name = "pmt_crashlog";
-		break;
-	default:
+	if (!intel_ext_cap_allowed(id))
+		return -EINVAL;
+
+	if (intel_ext_cap_disabled(id, quirks))
+		return -EINVAL;
+
+	snprintf(feature_id_name, sizeof(feature_id_name), "%s_%d", INTEL_EXT_CAP_PREFIX, id);
+
+	if (!header->num_entries) {
+		dev_err(dev, "Invalid 0 entry count for %s header\n", feature_id_name);
 		return -EINVAL;
 	}
 
-	if (!header->num_entries || !header->entry_size) {
-		dev_err(dev, "Invalid count or size for %s header\n", name);
+	if (!header->entry_size) {
+		dev_err(dev, "Invalid 0 entry size for %s header\n", feature_id_name);
 		return -EINVAL;
 	}
 
@@ -135,26 +160,26 @@ static int pmt_add_dev(struct pci_dev *pdev, struct intel_dvsec_header *header,
 		header->offset >>= 3;
 
 	/*
-	 * The PMT DVSEC contains the starting offset and count for a block of
+	 * The DVSEC contains the starting offset and count for a block of
 	 * discovery tables, each providing access to monitoring facilities for
 	 * a section of the device. Create a resource list of these tables to
 	 * provide to the driver.
 	 */
 	for (i = 0, tmp = res; i < count; i++, tmp++) {
 		tmp->start = pdev->resource[header->tbir].start +
-			     header->offset + i * (size << 2);
-		tmp->end = tmp->start + (size << 2) - 1;
+			     header->offset + i * (size * sizeof(u32));
+		tmp->end = tmp->start + (size * sizeof(u32)) - 1;
 		tmp->flags = IORESOURCE_MEM;
 	}
 
 	cell->resources = res;
 	cell->num_resources = count;
-	cell->name = name;
+	cell->name = feature_id_name;
 
-	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cell, 1, NULL, 0,
-				    NULL);
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cell, 1, NULL, 0, NULL);
 }
 
+
 static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct pmt_platform_info *info;
@@ -176,7 +201,7 @@ static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 		header = info->capabilities;
 		while (*header) {
-			ret = pmt_add_dev(pdev, *header, quirks);
+			ret = intel_ext_cap_add_dev(pdev, *header, quirks);
 			if (ret)
 				dev_warn(&pdev->dev,
 					 "Failed to add device for DVSEC id %d\n",
@@ -212,7 +237,7 @@ static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			header.tbir = INTEL_DVSEC_TABLE_BAR(table);
 			header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
 
-			ret = pmt_add_dev(pdev, &header, quirks);
+			ret = intel_ext_cap_add_dev(pdev, &header, quirks);
 			if (ret)
 				continue;
 
drivers/platform/x86/intel/pmt/crashlog.c +1 -1
index 1c1021f04d3c..86c4b016af59 100644
@@ -17,7 +17,7 @@
 
 #include "class.h"
 
-#define DRV_NAME		"pmt_crashlog"
+#define DRV_NAME		"intel_extnd_cap_4"
 
 /* Crashlog discovery header types */
 #define CRASH_TYPE_OOBMSM	1
drivers/platform/x86/intel/pmt/telemetry.c +1 -1
index a58843360fbf..3559f6e7b388 100644
@@ -17,7 +17,7 @@
 
 #include "class.h"
 
-#define TELEM_DEV_NAME		"pmt_telemetry"
+#define TELEM_DEV_NAME		"intel_extnd_cap_2"
 
 #define TELEM_SIZE_OFFSET	0x0
 #define TELEM_GUID_OFFSET	0x4
Signature · 1 line
2.25.1
author maintainer
#3 lore raw

PATCH v2 3/5 MFD: intel_pmt: Add support for PCIe VSEC structures

In reply to David E. Box

Adds support for discovering Intel extended capability features from Vendor Specific Extended Capability (VSEC) registers in PCIe config space.

---

V2: Implemented in intel_pmt.c instead new file.

 drivers/mfd/intel_pmt.c | 158 +++++++++++++++++++++++++++++-----------
 1 file changed, 115 insertions(+), 43 deletions(-)
drivers/mfd/intel_pmt.c +115 -43
index 08cd3357577e..08e07b31aeec 100644
@@ -40,7 +40,8 @@ static int intel_ext_cap_allow_list[] = {
 	INTEL_EXT_CAP_ID_CRASHLOG,
 };
 
-struct intel_dvsec_header {
+struct intel_ext_cap_header {
+	u8	rev;
 	u16	length;
 	u16	id;
 	u8	num_entries;
@@ -65,7 +66,7 @@ enum pmt_quirks {
 
 struct pmt_platform_info {
 	unsigned long quirks;
-	struct intel_dvsec_header **capabilities;
+	struct intel_ext_cap_header **capabilities;
 };
 
 static const struct pmt_platform_info tgl_info = {
@@ -74,7 +75,7 @@ static const struct pmt_platform_info tgl_info = {
 };
 
 /* DG1 Platform with DVSEC quirk*/
-static struct intel_dvsec_header dg1_telemetry = {
+static struct intel_ext_cap_header dg1_telemetry = {
 	.length = 0x10,
 	.id = 2,
 	.num_entries = 1,
@@ -83,7 +84,7 @@ static struct intel_dvsec_header dg1_telemetry = {
 	.offset = 0x466000,
 };
 
-static struct intel_dvsec_header *dg1_capabilities[] = {
+static struct intel_ext_cap_header *dg1_capabilities[] = {
 	&dg1_telemetry,
 	NULL
 };
@@ -118,7 +119,7 @@ static bool intel_ext_cap_disabled(u16 id, unsigned long quirks)
 	}
 }
 
-static int intel_ext_cap_add_dev(struct pci_dev *pdev, struct intel_dvsec_header *header,
+static int intel_ext_cap_add_dev(struct pci_dev *pdev, struct intel_ext_cap_header *header,
 				 unsigned long quirks)
 {
 	struct device *dev = &pdev->dev;
@@ -160,7 +161,7 @@ static int intel_ext_cap_add_dev(struct pci_dev *pdev, struct intel_dvsec_header
 		header->offset >>= 3;
 
 	/*
-	 * The DVSEC contains the starting offset and count for a block of
+	 * The DVSEC/VSEC contains the starting offset and count for a block of
 	 * discovery tables, each providing access to monitoring facilities for
 	 * a section of the device. Create a resource list of these tables to
 	 * provide to the driver.
@@ -179,13 +180,113 @@ static int intel_ext_cap_add_dev(struct pci_dev *pdev, struct intel_dvsec_header
 	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cell, 1, NULL, 0, NULL);
 }
 
+static bool intel_ext_cap_walk_dvsec(struct pci_dev *pdev, unsigned long quirks)
+{
+	int count = 0;
+	int pos = 0;
+
+	do {
+		struct intel_ext_cap_header header;
+		u32 table, hdr;
+		u16 vid;
+		int ret;
+
+		pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_DVSEC);
+		if (!pos)
+			break;
+
+		pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER1, &hdr);
+		vid = PCI_DVSEC_HEADER1_VID(hdr);
+		if (vid != PCI_VENDOR_ID_INTEL)
+			continue;
+
+		/* Support only revision 1 */
+		header.rev = PCI_DVSEC_HEADER1_REV(hdr);
+		if (header.rev != 1) {
+			dev_warn(&pdev->dev, "Unsupported DVSEC revision %d\n",
+				 header.rev);
+			continue;
+		}
+
+		header.length = PCI_DVSEC_HEADER1_LEN(hdr);
+
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES,
+				     &header.num_entries);
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE,
+				     &header.entry_size);
+		pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE,
+				      &table);
+
+		header.tbir = INTEL_DVSEC_TABLE_BAR(table);
+		header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
+
+		pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER2, &hdr);
+		header.id = PCI_DVSEC_HEADER2_ID(hdr);
+
+		ret = intel_ext_cap_add_dev(pdev, &header, quirks);
+		if (ret)
+			continue;
+
+		count++;
+	} while (true);
+
+	return count;
+}
+
+static bool intel_ext_cap_walk_vsec(struct pci_dev *pdev, unsigned long quirks)
+{
+	int count = 0;
+	int pos = 0;
+
+	do {
+		struct intel_ext_cap_header header;
+		u32 table, hdr;
+		int ret;
+
+		pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_VNDR);
+		if (!pos)
+			break;
+
+		pci_read_config_dword(pdev, pos + PCI_VNDR_HEADER, &hdr);
+
+		/* Support only revision 1 */
+		header.rev = PCI_VNDR_HEADER_REV(hdr);
+		if (header.rev != 1) {
+			dev_warn(&pdev->dev, "Unsupported VSEC revision %d\n",
+				 header.rev);
+			continue;
+		}
+
+		header.id = PCI_VNDR_HEADER_ID(hdr);
+		header.length = PCI_VNDR_HEADER_LEN(hdr);
+
+		/* entry, size, and table offset are the same as DVSEC */
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES,
+				     &header.num_entries);
+		pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE,
+				     &header.entry_size);
+		pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE,
+				      &table);
+
+		header.tbir = INTEL_DVSEC_TABLE_BAR(table);
+		header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
+
+		ret = intel_ext_cap_add_dev(pdev, &header, quirks);
+		if (ret)
+			continue;
+
+		count++;
+	} while (true);
+
+	return count;
+}
 
 static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct pmt_platform_info *info;
 	unsigned long quirks = 0;
-	bool found_devices = false;
-	int ret, pos = 0;
+	int device_count = 0;
+	int ret;
 
 	ret = pcim_enable_device(pdev);
 	if (ret)
@@ -196,8 +297,11 @@ static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (info)
 		quirks = info->quirks;
 
+	device_count += intel_ext_cap_walk_dvsec(pdev, quirks);
+	device_count += intel_ext_cap_walk_vsec(pdev, quirks);
+
 	if (info && (info->quirks & PMT_QUIRK_NO_DVSEC)) {
-		struct intel_dvsec_header **header;
+		struct intel_ext_cap_header **header;
 
 		header = info->capabilities;
 		while (*header) {
@@ -207,45 +311,13 @@ static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 					 "Failed to add device for DVSEC id %d\n",
 					 (*header)->id);
 			else
-				found_devices = true;
+				device_count++;
 
 			++header;
 		}
-	} else {
-		do {
-			struct intel_dvsec_header header;
-			u32 table;
-			u16 vid;
-
-			pos = pci_find_next_ext_capability(pdev, pos, PCI_EXT_CAP_ID_DVSEC);
-			if (!pos)
-				break;
-
-			pci_read_config_word(pdev, pos + PCI_DVSEC_HEADER1, &vid);
-			if (vid != PCI_VENDOR_ID_INTEL)
-				continue;
-
-			pci_read_config_word(pdev, pos + PCI_DVSEC_HEADER2,
-					     &header.id);
-			pci_read_config_byte(pdev, pos + INTEL_DVSEC_ENTRIES,
-					     &header.num_entries);
-			pci_read_config_byte(pdev, pos + INTEL_DVSEC_SIZE,
-					     &header.entry_size);
-			pci_read_config_dword(pdev, pos + INTEL_DVSEC_TABLE,
-					      &table);
-
-			header.tbir = INTEL_DVSEC_TABLE_BAR(table);
-			header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
-
-			ret = intel_ext_cap_add_dev(pdev, &header, quirks);
-			if (ret)
-				continue;
-
-			found_devices = true;
-		} while (true);
 	}
 
-	if (!found_devices)
+	if (!device_count)
 		return -ENODEV;
 
 	pm_runtime_put(&pdev->dev);
Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH v2 4/5 platform/x86: intel_pmt_telemetry: Ignore zero sized entries

In reply to David E. Box

Some devices may expose non-functioning entries that are reserved for future use. These entries have zero size. Ignore them during probe.

---

V2: New patch

 drivers/platform/x86/intel/pmt/telemetry.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/platform/x86/intel/pmt/telemetry.c +8 -0
index 3559f6e7b388..d93d02672679 100644
@@ -61,6 +61,14 @@ static int pmt_telem_header_decode(struct intel_pmt_entry *entry,
 	/* Size is measured in DWORDS, but accessor returns bytes */
 	header->size = TELEM_SIZE(readl(disc_table));
 
+	/*
+	 * Some devices may expose non-functioning entries that are
+	 * reserved for future use. They have zero size. Do not fail
+	 * probe for these. Just ignore them.
+	 */
+	if (header->size == 0)
+		return 1;
+
 	return 0;
 }
 
Signature · 1 line
2.25.1
#5 lore raw

Re: [PATCH v2 4/5] platform/x86: intel_pmt_telemetry: Ignore zero sized entries

Hi,

Quoted 4 lines · David E. Box

Some devices may expose non-functioning entries that are reserved for future use. These entries have zero size. Ignore them during probe.

Thank you for your patch, I've applied this patch to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

Quoted 27 lines

---

V2: New patch

 drivers/platform/x86/intel/pmt/telemetry.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/platform/x86/intel/pmt/telemetry.c +8 -0
index 3559f6e7b388..d93d02672679 100644
@@ -61,6 +61,14 @@ static int pmt_telem_header_decode(struct intel_pmt_entry *entry,
 	/* Size is measured in DWORDS, but accessor returns bytes */
 	header->size = TELEM_SIZE(readl(disc_table));
 
+	/*
+	 * Some devices may expose non-functioning entries that are
+	 * reserved for future use. They have zero size. Do not fail
+	 * probe for these. Just ignore them.
+	 */
+	if (header->size == 0)
+		return 1;
+
 	return 0;
 }
 
author maintainer
#6 lore raw

PATCH v2 5/5 MFD: intel_pmt: Add DG2 support

In reply to David E. Box

Add Platform Monitoring Technology support for DG2 platforms.

---

V2: New patch

 drivers/mfd/intel_pmt.c                | 9 +++++++++
 drivers/platform/x86/intel/pmt/class.c | 2 ++
 2 files changed, 11 insertions(+)
drivers/mfd/intel_pmt.c +9 -0
index 08e07b31aeec..a6fe50f65479 100644
@@ -94,6 +94,11 @@ static const struct pmt_platform_info dg1_info = {
 	.capabilities = dg1_capabilities,
 };
 
+/* DG2 Platform */
+static const struct pmt_platform_info dg2_info = {
+	.quirks = PMT_QUIRK_TABLE_SHIFT
+};
+
 static bool intel_ext_cap_allowed(u16 id)
 {
 	int i;
@@ -334,11 +339,15 @@ static void pmt_pci_remove(struct pci_dev *pdev)
 
 #define PCI_DEVICE_ID_INTEL_PMT_ADL	0x467d
 #define PCI_DEVICE_ID_INTEL_PMT_DG1	0x490e
+#define PCI_DEVICE_ID_INTEL_PMT_DG2_G10	0x4f93
+#define PCI_DEVICE_ID_INTEL_PMT_DG2_G11	0x4f95
 #define PCI_DEVICE_ID_INTEL_PMT_OOBMSM	0x09a7
 #define PCI_DEVICE_ID_INTEL_PMT_TGL	0x9a0d
 static const struct pci_device_id pmt_pci_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, PMT_ADL, &tgl_info) },
 	{ PCI_DEVICE_DATA(INTEL, PMT_DG1, &dg1_info) },
+	{ PCI_DEVICE_DATA(INTEL, PMT_DG2_G10, &dg2_info) },
+	{ PCI_DEVICE_DATA(INTEL, PMT_DG2_G11, &dg2_info) },
 	{ PCI_DEVICE_DATA(INTEL, PMT_OOBMSM, NULL) },
 	{ PCI_DEVICE_DATA(INTEL, PMT_TGL, &tgl_info) },
 	{ }
drivers/platform/x86/intel/pmt/class.c +2 -0
index 659b1073033c..f2a8e19a02e7 100644
@@ -29,6 +29,8 @@
 static const struct pci_device_id pmt_telem_early_client_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x467d) }, /* ADL */
 	{ PCI_VDEVICE(INTEL, 0x490e) }, /* DG1 */
+	{ PCI_VDEVICE(INTEL, 0x4f93) }, /* DG2_G10 */
+	{ PCI_VDEVICE(INTEL, 0x4f95) }, /* DG2_G11 */
 	{ PCI_VDEVICE(INTEL, 0x9a0d) }, /* TGL */
 	{ }
 };
Signature · 1 line
2.25.1
Acked-by on the v2 series
#7 lore raw
In reply to David E. Box

Hi,

Quoted 12 lines · David E. Box

This patch enables general support for Intel defined PCIe VSEC and DVSEC capabilities in the Intel Platform Monitoring Technology (PMT) driver. Though the driver was written exclusively for PMT capabilities, newer DVSEC and VSEC IDs for other capabilities can exist on the same device requiring that the driver handle them.

This 2nd revision drops the creation of a separate OOBMSM driver. Instead, all cell drivers will have a dependency on CONFIG_MFD_INTEL_PMT, whether or not they are PMT. Changes in this patchset to the current cell drivers located in platform/x86 are based on Hans for-next branch where they have been moved to the intel/pmt subfolder.

Quoted 5 lines

David E. Box (5):
PCI: Add #defines for accessing PCIE DVSEC fields
MFD: intel_pmt: Support non-PMT capabilities
MFD: intel_pmt: Add support for PCIe VSEC structures platform/x86: intel_pmt_telemetry: Ignore zero sized entries

Since this patch is pretty much a stand alone patch I've picked this one (4/5) up now.

The rest of the patches touch both MFD and pdx86 files, so these should be picked up by Lee. But they rely on the patch moving the pdx86 pmt code into the drivers/platform/x86/intel/pmt dir which is currently only available in my for-next branch.

I think it is probably best to wait for 5.15-rc1 and then Lee can merge the rest. Here is my ack for Lee picking up the pdx86 bits:

Lee, alternatively you could also merge commit e184b1e589a7fbb80bfdd0364c11422999a17a26 from the pdx86 tree, that is only 1 commit ahead of my latest fixes pull-req to Linus for 5.14, so in essence that is 5.14-rc? (?=5 I think)
+ just the commit which you need as base, then you could still merge these this cycle. If you wish I can put a signed tag on that
for you (I will treat it as immutable either way).

Regards,

Hans

Quoted 12 lines

MFD: intel_pmt: Add DG2 support

 drivers/mfd/intel_pmt.c                    | 256 +++++++++++++++------
 drivers/platform/x86/intel/pmt/class.c     |   2 +
 drivers/platform/x86/intel/pmt/crashlog.c  |   2 +-
 drivers/platform/x86/intel/pmt/telemetry.c |  10 +-
 include/uapi/linux/pci_regs.h              |   4 +
 5 files changed, 197 insertions(+), 77 deletions(-)

base-commit: ca42c119fc6746e65423257e7eddf5fc9e96edc2

#8 lore raw
Quoted 33 lines · Hans de Goede

Hi,

Quoted 12 lines · David E. Box

This patch enables general support for Intel defined PCIe VSEC and DVSEC capabilities in the Intel Platform Monitoring Technology (PMT) driver. Though the driver was written exclusively for PMT capabilities, newer DVSEC and VSEC IDs for other capabilities can exist on the same device requiring that the driver handle them.

This 2nd revision drops the creation of a separate OOBMSM driver. Instead, all cell drivers will have a dependency on CONFIG_MFD_INTEL_PMT, whether or not they are PMT. Changes in this patchset to the current cell drivers located in platform/x86 are based on Hans for-next branch where they have been moved to the intel/pmt subfolder.

Quoted 5 lines

David E. Box (5):
PCI: Add #defines for accessing PCIE DVSEC fields
MFD: intel_pmt: Support non-PMT capabilities
MFD: intel_pmt: Add support for PCIe VSEC structures platform/x86: intel_pmt_telemetry: Ignore zero sized entries

Since this patch is pretty much a stand alone patch I've picked this one (4/5) up now.

The rest of the patches touch both MFD and pdx86 files, so these should be picked up by Lee. But they rely on the patch moving the pdx86 pmt code into the drivers/platform/x86/intel/pmt dir which is currently only available in my for-next branch.

I think it is probably best to wait for 5.15-rc1 and then Lee can merge the rest. Here is my ack for Lee picking up the pdx86 bits:

Quoted 8 lines

Lee, alternatively you could also merge commit e184b1e589a7fbb80bfdd0364c11422999a17a26 from the pdx86 tree, that is only 1 commit ahead of my latest fixes pull-req to Linus for 5.14, so in essence that is 5.14-rc? (?=5 I think)
+ just the commit which you need as base, then you could still merge these this cycle. If you wish I can put a signed tag on that
for you (I will treat it as immutable either way).

I'm happy to wait.

The MFD patches aren't even reviewed yet and it's late in the cycle.

Signature · 4 lines
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog