Fix out-of-bound in resp_readcap16 and resp_report_tgtpgs

Ye Bin (2):
scsi:scsi_debug: Fix out-of-bound in resp_readcap16 scsi:scsi_debug: Fix potential OOB in resp_report_tgtpgs

 drivers/scsi/scsi_debug.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

2.31.1

We got following warning when runing syzkaller:

[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724]    program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995]  dump_stack+0x108/0x15f
[ 3813.847524]  print_address_description+0xa5/0x372
[ 3813.848243]  kasan_report.cold+0x236/0x2a8
[ 3813.849439]  check_memory_region+0x240/0x270
[ 3813.850094]  memcpy+0x30/0x80
[ 3813.850553]  sg_copy_buffer+0x157/0x1e0
[ 3813.853032]  sg_copy_from_buffer+0x13/0x20
[ 3813.853660]  fill_from_dev_buffer+0x135/0x370
[ 3813.854329]  resp_readcap16+0x1ac/0x280
[ 3813.856917]  schedule_resp+0x41f/0x1630
[ 3813.858203]  scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699]  scsi_dispatch_cmd+0x330/0x950
[ 3813.863329]  scsi_request_fn+0xd8e/0x1710
[ 3813.863946]  __blk_run_queue+0x10b/0x230
[ 3813.864544]  blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220]  sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637]  sg_write+0x6c8/0xef0
[ 3813.878853]  __vfs_write+0xe4/0x800
[ 3813.883487]  vfs_write+0x17b/0x530
[ 3813.884008]  ksys_write+0x103/0x270
[ 3813.886268]  __x64_sys_write+0x77/0xc0
[ 3813.886841]  do_syscall_64+0x106/0x360
[ 3813.887415]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

We can reproduce this issue with following syzkaller log:
r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)

As in resp_readcap16 we get "int alloc_len" value -1104926854, and then pass huge arr_len to fill_from_dev_buffer, but arr is only has 32 bytes space. So lead to OOB in sg_copy_buffer.
To solve this issue just define alloc_len with U32 type.

---
 drivers/scsi/scsi_debug.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 66f507469a31..be0440545744 100644
@@ -1856,7 +1856,7 @@ static int resp_readcap16(struct scsi_cmnd *scp,
 {
 	unsigned char *cmd = scp->cmnd;
 	unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
-	int alloc_len;
+	u32 alloc_len;
 
 	alloc_len = get_unaligned_be32(cmd + 10);
 	/* following just in case virtual_gb changed */

@@ -1885,7 +1885,7 @@ static int resp_readcap16(struct scsi_cmnd *scp,
 	}
 
 	return fill_from_dev_buffer(scp, arr,
-			    min_t(int, alloc_len, SDEBUG_READCAP16_ARR_SZ));
+			    min_t(u32, alloc_len, SDEBUG_READCAP16_ARR_SZ));
 }
 
 #define SDEBUG_MAX_TGTPGS_ARR_SZ 1412

2.31.1

As alloc_len's type is 'int', and value get from cmd which maybe negetive. So it will pass huge len to fill_from_dev_buffer, lead to OOB.

---
 drivers/scsi/scsi_debug.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

index be0440545744..ead65cdfb522 100644
@@ -1896,8 +1896,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd *scp,
 	unsigned char *cmd = scp->cmnd;
 	unsigned char *arr;
 	int host_no = devip->sdbg_host->shost->host_no;
-	int n, ret, alen, rlen;
 	int port_group_a, port_group_b, port_a, port_b;
+	u32 alen, n, rlen;
+	int ret;
 
 	alen = get_unaligned_be32(cmd + 6);
 	arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);

@@ -1959,9 +1960,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd *scp,
 	 * - The constructed command length
 	 * - The maximum array size
 	 */
-	rlen = min_t(int, alen, n);
+	rlen = min(alen, n);
 	ret = fill_from_dev_buffer(scp, arr,
-			   min_t(int, rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
+			   min_t(u32, rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
 	kfree(arr);
 	return ret;
 }

2.31.1

ping......

ping...

Hi Doug,

Do you plan to take a look at this patch series? If not, do you want me to take a look?

Thanks,

Bart.