Skip to contentSkip to conversation

ARM: meson: Add S905Y2 SOC ID

PATCH In review Christian Hewitt 2 participants 3 messages Aug 20, 2021 – Aug 30, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: meson: Add S905Y2 SOC ID

Add the SOC ID for the S905Y2 to board info, see below for before/after tested with a Radxa Zero board:

SoC:   Amlogic Meson G12A (Unknown) Revision 28:b (30:2)
SoC:   Amlogic Meson G12A (S905Y2) Revision 28:b (30:2)
---
 arch/arm/mach-meson/board-info.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-meson/board-info.c +1 -0
index d16d3f194d..2421acd817 100644
@@ -64,6 +64,7 @@ static const struct meson_gx_package_id {
 	{ "A113X",  0x25, 0x37, 0xff },
 	{ "A113D",  0x25, 0x22, 0xff },
 	{ "S905D2", 0x28, 0x10, 0xf0 },
+	{ "S905Y2", 0x28, 0x30, 0xf0 },
 	{ "S905X2", 0x28, 0x40, 0xf0 },
 	{ "A311D",  0x29, 0x10, 0xf0 },
 	{ "S922X",  0x29, 0x40, 0xf0 },
Signature · 7 lines
2.17.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
Reviewed-by on v1 1/1
#1 lore raw
Quoted 17 lines · Christian Hewitt

Add the SOC ID for the S905Y2 to board info, see below for before/after tested with a Radxa Zero board:

SoC:   Amlogic Meson G12A (Unknown) Revision 28:b (30:2)
SoC:   Amlogic Meson G12A (S905Y2) Revision 28:b (30:2)
---
 arch/arm/mach-meson/board-info.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-meson/board-info.c +0 -0
index d16d3f194d..2421acd817 100644

arch/arm/mach-meson/board-info.c static const struct meson_gx_package_id { · line 70

Quoted 7 lines
arch/arm/mach-meson/board-info.c +1 -0
@@ -64,6 +64,7 @@ static const struct meson_gx_package_id {
 	{ "A113X",  0x25, 0x37, 0xff },
 	{ "A113D",  0x25, 0x22, 0xff },
 	{ "S905D2", 0x28, 0x10, 0xf0 },
+	{ "S905Y2", 0x28, 0x30, 0xf0 },
 	{ "S905X2", 0x28, 0x40, 0xf0 },
 	{ "A311D",  0x29, 0x10, 0xf0 },
 	{ "S922X",  0x29, 0x40, 0xf0 },
#2 lore raw
In reply to Christian Hewitt
Quoted 17 lines · Christian Hewitt

Add the SOC ID for the S905Y2 to board info, see below for before/after tested with a Radxa Zero board:

SoC:   Amlogic Meson G12A (Unknown) Revision 28:b (30:2)
SoC:   Amlogic Meson G12A (S905Y2) Revision 28:b (30:2)
---
 arch/arm/mach-meson/board-info.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-meson/board-info.c +0 -0
index d16d3f194d..2421acd817 100644

arch/arm/mach-meson/board-info.c static const struct meson_gx_package_id { · line 70

Quoted 7 lines
arch/arm/mach-meson/board-info.c +1 -0
@@ -64,6 +64,7 @@ static const struct meson_gx_package_id {
 	{ "A113X",  0x25, 0x37, 0xff },
 	{ "A113D",  0x25, 0x22, 0xff },
 	{ "S905D2", 0x28, 0x10, 0xf0 },
+	{ "S905Y2", 0x28, 0x30, 0xf0 },
 	{ "S905X2", 0x28, 0x40, 0xf0 },
 	{ "A311D",  0x29, 0x10, 0xf0 },
 	{ "S922X",  0x29, 0x40, 0xf0 },

Applied to u-boot-amlogic

Thanks,
Neil