Convert CONFIG_SYS_FSL_DDR4 to Kconfig
PATCH 1/1 Convert CONFIG_SYS_FSL_DDR4 to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_FSL_DDR4
Signed-off-by Tom Rini <[email protected]>
--- README | 4 ---- configs/ls1088aqds_defconfig | 1 - configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1088aqds_qspi_defconfig | 2 +- configs/ls1088aqds_sdcard_ifc_defconfig | 1 - configs/ls1088aqds_tfa_defconfig | 1 - configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 2 +- configs/ls1088ardb_qspi_defconfig | 2 +- configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 1 - configs/ls1088ardb_tfa_defconfig | 1 - configs/ls2080aqds_sdcard_defconfig | 1 - 11 files changed, 4 insertions(+), 14 deletions(-)
README +0 -4
@@ -465,10 +465,6 @@ The following options need to be configured: Board config to use DDR3L. It can be enabled for SoCs with DDR3L controllers. - CONFIG_SYS_FSL_DDR4 - Board config to use DDR4. It can be enabled for SoCs with - DDR4 controllers. - CONFIG_SYS_FSL_IFC_BE Defines the IFC controller register space as Big Endian
configs/ls1088aqds_defconfig +0 -1
@@ -16,7 +16,6 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_DISPLAY_BOARDINFO is not set
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +1 -1
@@ -18,7 +18,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" +CONFIG_SYS_EXTRA_OPTIONS=" QSPI_BOOT" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls1088aqds_qspi_defconfig +1 -1
@@ -19,7 +19,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" +CONFIG_SYS_EXTRA_OPTIONS=" QSPI_BOOT" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls1088aqds_sdcard_ifc_defconfig +0 -1
@@ -21,7 +21,6 @@ CONFIG_SPL=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_SD_BOOT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
configs/ls1088aqds_tfa_defconfig +0 -1
@@ -21,7 +21,6 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +1 -1
@@ -18,7 +18,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" +CONFIG_SYS_EXTRA_OPTIONS=" QSPI_BOOT" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls1088ardb_qspi_defconfig +1 -1
@@ -19,7 +19,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT" +CONFIG_SYS_EXTRA_OPTIONS=" QSPI_BOOT" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +0 -1
@@ -20,7 +20,6 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls1088ardb_tfa_defconfig +0 -1
@@ -21,7 +21,6 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_USE_BOOTCOMMAND is not set
configs/ls2080aqds_sdcard_defconfig +0 -1
@@ -19,7 +19,6 @@ CONFIG_AHCI=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y
Signature · 1 line
2.17.1
Quoted 4 lines · Tom Rini
This converts the following to
Kconfig:
CONFIG_SYS_FSL_DDR4Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom