Skip to contentSkip to conversation

ASoC: rt5682: Fix the vol+ button detection issue

PATCH In review [email protected] 2 participants 2 messages Aug 25, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ASoC: rt5682: Fix the vol+ button detection issue

From: Derek Fang <[email protected]>

Fix the wrong button vol+ detection issue with some brand headsets by fine tuning the threshold of button vol+ and SAR ADC button accuracy.

---
 sound/soc/codecs/rt5682.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
sound/soc/codecs/rt5682.c +8 -6
index fcf442b8a732..e822fa1b9d4b 100644
@@ -43,7 +43,9 @@ static const struct reg_sequence patch_list[] = {
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
 	{RT5682_I2C_CTRL, 0x000f},
 	{RT5682_PLL2_INTERNAL, 0x8266},
-	{RT5682_SAR_IL_CMD_3, 0x8365},
+	{RT5682_SAR_IL_CMD_1, 0x22b7},
+	{RT5682_SAR_IL_CMD_3, 0x0365},
+	{RT5682_SAR_IL_CMD_6, 0x0110},
 };
 
 void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -1726,8 +1728,6 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_MIXER("Stereo1 ADC MIXR", RT5682_STO1_ADC_DIG_VOL,
 		RT5682_R_MUTE_SFT, 1, rt5682_sto1_adc_r_mix,
 		ARRAY_SIZE(rt5682_sto1_adc_r_mix)),
-	SND_SOC_DAPM_SUPPLY("BTN Detection Mode", RT5682_SAR_IL_CMD_1,
-		14, 1, NULL, 0),
 
 	/* ADC PGA */
 	SND_SOC_DAPM_PGA("Stereo1 ADC MIX", SND_SOC_NOPM, 0, 0, NULL, 0),
@@ -1898,8 +1898,6 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	{"Stereo1 ADC MIXR", "ADC2 Switch", "Stereo1 ADC R2 Mux"},
 	{"Stereo1 ADC MIXR", NULL, "ADC Stereo1 Filter"},
 
-	{"ADC Stereo1 Filter", NULL, "BTN Detection Mode"},
-
 	{"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXL"},
 	{"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXR"},
 
@@ -2949,7 +2947,8 @@ static int rt5682_suspend(struct snd_soc_component *component)
 
 		/* enter SAR ADC power saving mode */
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
-			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK, 0);
+			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK |
+			RT5682_SAR_BUTDET_RST_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, 0);
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
 			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK,
 			RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV | RT5682_SAR_BUTDET_RST_NORMAL);
@@ -2971,6 +2970,9 @@ static int rt5682_resume(struct snd_soc_component *component)
 	regcache_sync(rt5682->regmap);
 
 	if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
+		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
+			RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_SEL_MB1_MB2_MASK,
+			RT5682_SAR_BUTDET_POW_NORM | RT5682_SAR_SEL_MB1_MB2_AUTO);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
 			RT5682_CTRL_MB1_FSM | RT5682_CTRL_MB2_FSM);
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 8 lines · On Wed, 25 Aug 2021 12:03:46 +0800, [email protected] wrote:

From: Derek Fang <[email protected]>

Fix the wrong button vol+ detection issue with some brand headsets by fine tuning the threshold of button vol+ and SAR ADC button accuracy.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: rt5682: Fix the vol+ button detection issue

      commit: 8d3019b63b3d92c9b5f1548f600485d39262bbe1

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark