PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
Subsystems (4)
PATCH v2 1/1 PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
From: Rafael J. Wysocki <[email protected]>
On some systems, in order to get to the deepest low-power state of the platform (which may be necessary to save significant enough amounts of energy while suspended to idle. for example), devices on the PCI bus exposed by the VMD driver need to be power-managed via ACPI. However, the layout of the ACPI namespace below the VMD controller device object does not reflect the layout of the PCI bus under the VMD host bridge, so in order to identify the ACPI companion objects for the devices on that bus, it is necessary to use a special _ADR encoding on the ACPI side. In other words, acpi_pci_find_companion() does not work for these devices, so it needs to be amended with a special lookup logic specific to the VMD bus.
Address this issue by allowing the VMD driver to temporarily install an ACPI companion lookup hook containing the code matching the devices on the VMD PCI bus with the corresponding objects in the ACPI namespace.
---
-> v2:
* Use a read-write semaphore for hook manipulation protection and get rid of the static key present in the previous version.
* Add a busnr check in vmd_acpi_find_companion().
Wendy, David, please test this one!
--- drivers/pci/controller/vmd.c | 55 +++++++++++++++++++++++++++++++ drivers/pci/host-bridge.c | 1 drivers/pci/pci-acpi.c | 74 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci-acpi.h | 3 + 4 files changed, 133 insertions(+)
drivers/pci/controller/vmd.c +55 -0
@@ -11,6 +11,7 @@#include <linux/module.h> #include <linux/msi.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/pci-ecam.h> #include <linux/srcu.h> #include <linux/rculist.h>
@@ -447,6 +448,56 @@ static struct pci_ops vmd_ops = { .write = vmd_pci_write, }; +#ifdef CONFIG_ACPI +static struct acpi_device *vmd_acpi_find_companion (struct pci_dev *pci_dev) +{ +struct pci_host_bridge *bridge; +u32 busnr, addr; + +if (pci_dev->bus->ops != &vmd_ops) +return NULL ; + + bridge =pci_find_host_bridge (pci_dev->bus); + busnr = pci_dev->bus->number - bridge->bus->number; +/* +* The address computation below is only applicable to relative bus +* numbers below 32. +*/ +if (busnr >31 ) +return NULL ; + + addr = (busnr <<24 ) | ((u32 )pci_dev->devfn <<16 ) |0x8000FFFFU ; + +dev_dbg (&pci_dev->dev,"Looking for ACPI companion (address 0x%x)\n" , + addr); + +return acpi_find_child_device (ACPI_COMPANION (bridge->dev.parent), addr, + false); +} + +static bool hook_installed; + +static void vmd_acpi_begin (void ) +{ +if (pci_acpi_set_companion_lookup_hook (vmd_acpi_find_companion)) +return ; + + hook_installed = true; +} + +static void vmd_acpi_end (void ) +{ +if (!hook_installed) +return ; + +pci_acpi_clear_companion_lookup_hook (); + hook_installed = false; +} +#else +static inline void vmd_acpi_begin (void ) { } +static inline void vmd_acpi_end (void ) { } +#endif /* CONFIG_ACPI */ +static void vmd_attach_resources (struct vmd_dev *vmd) { vmd->dev->resource[VMD_MEMBAR1 ].child = &vmd->resources[1 ];
@@ -747,6 +798,8 @@ static int vmd_enable_domain(struct vmd_if (vmd->irq_domain)dev_set_msi_domain (&vmd->bus->dev, vmd->irq_domain); +vmd_acpi_begin (); +pci_scan_child_bus (vmd->bus);pci_assign_unassigned_bus_resources (vmd->bus);
@@ -760,6 +813,8 @@ static int vmd_enable_domain(struct vmd_pci_bus_add_devices (vmd->bus); +vmd_acpi_end (); +WARN (sysfs_create_link (&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,"domain" ),"Can't create symlink to domain\n" );return 0 ;
drivers/pci/host-bridge.c +1 -0
@@ -23,6 +23,7 @@ struct pci_host_bridge *pci_find_host_brreturn to_pci_host_bridge (root_bus->bridge); } +EXPORT_SYMBOL_GPL (pci_find_host_bridge);struct device *pci_get_host_bridge_device (struct pci_dev *dev) {
drivers/pci/pci-acpi.c +74 -0
92 lines not on this page · raw message
include/linux/pci-acpi.h +3 -0
@@ -122,6 +122,9 @@ static inline void pci_acpi_add_edr_notistatic inline void pci_acpi_remove_edr_notifier (struct pci_dev *pdev) { }#endif /* CONFIG_PCIE_EDR */ +int pci_acpi_set_companion_lookup_hook (struct acpi_device *(*func)(struct pci_dev *)); +void pci_acpi_clear_companion_lookup_hook (void ); +#else /* CONFIG_ACPI */ static inline void acpi_pci_add_bus (struct pci_bus *bus) { }static inline void acpi_pci_remove_bus (struct pci_bus *bus) { }
Hi Rafael,
Tested this PATCH v2 against intel next v5.12 kernel on ADL-S NVME and SATA storages:
cat /sys/devices/pci0000\:00/0000\:00\:0e.0/firmware_node/path \_SB_.PC00.VMD0
10000:e0:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
10000:e0:1d.0 System peripheral: Intel Corporation Device 09ab
10000:e0:1d.4 PCI bridge: Intel Corporation Device 7ab4 (rev 11)
10000:e1:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO
[ 6193.658074] ahci 10000:e0:17.0: PCI PM: Suspend power state: D3hot [ 6193.658156] nvme 10000:e1:00.0: PCI PM: Suspend power state: D3hot [ 6193.710883] pcieport 10000:e0:1d.4: PCI PM: Suspend power state: D3cold [ 6193.730318] vmd 0000:00:0e.0: PCI PM: Suspend power state: D3hot
cat /sys/kernel/debug/pmc_core/substate_residencies
Substate Residency S0i2.0 0 S0i2.1 13862128
Thanks!
-----Original Message-----
From: Rafael J. Wysocki <[email protected]>
Sent: Tuesday, August 24, 2021 10:44 PM
To: Linux PCI <[email protected]>; Derrick, Jonathan <[email protected]>; Bjorn Helgaas <[email protected]>
Cc: Wang, Wendy <[email protected]>; Linux ACPI <[email protected]>; LKML <[email protected]>; Mika Westerberg <[email protected]>; David Box <[email protected]>
Subject: [PATCH v2] PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
From: Rafael J. Wysocki <[email protected]>
On some systems, in order to get to the deepest low-power state of the platform (which may be necessary to save significant enough amounts of energy while suspended to idle. for example), devices on the PCI bus exposed by the VMD driver need to be power-managed via ACPI. However, the layout of the ACPI namespace below the VMD controller device object does not reflect the layout of the PCI bus under the VMD host bridge, so in order to identify the ACPI companion objects for the devices on that bus, it is necessary to use a special _ADR encoding on the ACPI side. In other words, acpi_pci_find_companion() does not work for these devices, so it needs to be amended with a special lookup logic specific to the VMD bus.
Address this issue by allowing the VMD driver to temporarily install an ACPI companion lookup hook containing the code matching the devices on the VMD PCI bus with the corresponding objects in the ACPI namespace.
---
-> v2:
* Use a read-write semaphore for hook manipulation protection and get rid of the static key present in the previous version.
* Add a busnr check in vmd_acpi_find_companion().
Wendy, David, please test this one!
--- drivers/pci/controller/vmd.c | 55 +++++++++++++++++++++++++++++++ drivers/pci/host-bridge.c | 1 drivers/pci/pci-acpi.c | 74 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci-acpi.h | 3 + 4 files changed, 133 insertions(+)
drivers/pci/controller/vmd.c +50 -0
@@ -11,6 +11,7 @@#include <linux/module.h> #include <linux/msi.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/pci-ecam.h> #include <linux/srcu.h> #include <linux/rculist.h>
@@ -447,6 +448,56 @@ static struct pci_ops vmd_ops = { .write = vmd_pci_write, }; +#ifdef CONFIG_ACPI +static struct acpi_device *vmd_acpi_find_companion (struct pci_dev +*pci_dev) { +struct pci_host_bridge *bridge; +u32 busnr, addr; + +if (pci_dev->bus->ops != &vmd_ops) +return NULL ; + + bridge =pci_find_host_bridge (pci_dev->bus); + busnr = pci_dev->bus->number - bridge->bus->number; +/* +* The address computation below is only applicable to relative bus +* numbers below 32. +*/ +if (busnr >31 ) +return NULL ; + + addr = (busnr <<24 ) | ((u32 )pci_dev->devfn <<16 ) |0x8000FFFFU ; + +dev_dbg (&pci_dev->dev,"Looking for ACPI companion (address 0x%x)\n" , + addr); + +return acpi_find_child_device (ACPI_COMPANION (bridge->dev.parent), addr, + false); +} + +static bool hook_installed; + +static void vmd_acpi_begin (void ) +{ +if (pci_acpi_set_companion_lookup_hook (vmd_acpi_find_companion)) +return ; + + hook_installed = true; +} + +static void vmd_acpi_end (void ) +{ +if (!hook_installed) +return ; + +pci_acpi_clear_companion_lookup_hook (); + hook_installed = false; +} +#else +static inline void vmd_acpi_begin (void ) { }static inline void +vmd_acpi_end (void ) { }#endif /* CONFIG_ACPI */ +static void vmd_attach_resources (struct vmd_dev *vmd) { vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; @@ -747,6 +798,8 @@ static int vmd_enable_domain(struct vmd_ if (vmd->irq_domain)
dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
+ vmd_acpi_begin();
+
pci_scan_child_bus(vmd->bus); pci_assign_unassigned_bus_resources(vmd->bus);
@@ -760,6 +813,8 @@ static int vmd_enable_domain(struct vmd_
pci_bus_add_devices(vmd->bus);
+ vmd_acpi_end();
+
WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
"domain"), "Can't create symlink to domain\n");
return 0;
drivers/pci/host-bridge.c +1 -0
@@ -23,6 +23,7 @@ struct pci_host_bridge *pci_find_host_brreturn to_pci_host_bridge (root_bus->bridge); } +EXPORT_SYMBOL_GPL (pci_find_host_bridge);struct device *pci_get_host_bridge_device (struct pci_dev *dev) {
drivers/pci/pci-acpi.c +68 -0
76 lines not on this page · raw message
+
+ up_write(&pci_acpi_companion_lookup_sem);
+}
+EXPORT_SYMBOL_GPL(pci_acpi_clear_companion_lookup_hook);
+
static struct acpi_device *acpi_pci_find_companion(struct device *dev) {
struct pci_dev *pci_dev = to_pci_dev(dev); @@ -1166,6 +1230,16 @@ static struct acpi_device *acpi_pci_find bool check_children;
u64 addr;
+ down_read(&pci_acpi_companion_lookup_sem);
+
+ adev = pci_acpi_find_companion_hook ?
+ pci_acpi_find_companion_hook(pci_dev) : NULL;
+
+ up_read(&pci_acpi_companion_lookup_sem);
+
+ if (adev)
+ return adev;
+
check_children = pci_is_bridge(pci_dev);
/* Please ref to ACPI spec for the syntax of _ADR */
addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
Index: linux-pm/include/linux/pci-acpi.h ===================================================================
include/linux/pci-acpi.h +4 -0
@@ -122,6 +122,9 @@ static inline void pci_acpi_add_edr_noti static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { } #endif /* CONFIG_PCIE_EDR */ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *));void +pci_acpi_clear_companion_lookup_hook (void ); +#else /* CONFIG_ACPI */ static inline void acpi_pci_add_bus (struct pci_bus *bus) { }static inline void acpi_pci_remove_bus (struct pci_bus *bus) { }
Rafael J. Wysocki
maintainerQuoted 18 lines · Wendy
Hi Rafael,
Tested this PATCH v2 against intel next v5.12 kernel on ADL-S NVME and SATA storages:
cat /sys/devices/pci0000\:00/0000\:00\:0e.0/firmware_node/path \_SB_.PC00.VMD0
10000:e0:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
10000:e0:1d.0 System peripheral: Intel Corporation Device 09ab
10000:e0:1d.4 PCI bridge: Intel Corporation Device 7ab4 (rev 11)
10000:e1:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO[ 6193.658074] ahci 10000:e0:17.0: PCI PM: Suspend power state: D3hot [ 6193.658156] nvme 10000:e1:00.0: PCI PM: Suspend power state: D3hot [ 6193.710883] pcieport 10000:e0:1d.4: PCI PM: Suspend power state: D3cold [ 6193.730318] vmd 0000:00:0e.0: PCI PM: Suspend power state: D3hot
Quoted 6 lines
cat
/sys/kernel/debug/pmc_core/substate_residenciesSubstate Residency S0i2.0 0 S0i2.1 13862128Thanks!
Thank you!
Quoted 244 lines
-----Original Message-----
From: Rafael J. Wysocki <[email protected]>
Sent: Tuesday, August 24, 2021 10:44 PM
To: Linux PCI <[email protected]>; Derrick, Jonathan <[email protected]>; Bjorn Helgaas <[email protected]>
Cc: Wang, Wendy <[email protected]>; Linux ACPI <[email protected]>; LKML <[email protected]>; Mika Westerberg <[email protected]>; David Box <[email protected]>
Subject: [PATCH v2] PCI: VMD: ACPI: Make ACPI companion lookup work for VMD busFrom: Rafael J. Wysocki <[email protected]>
On some systems, in order to get to the deepest low-power state of the platform (which may be necessary to save significant enough amounts of energy while suspended to idle. for example), devices on the PCI bus exposed by the VMD driver need to be power-managed via ACPI. However, the layout of the ACPI namespace below the VMD controller device object does not reflect the layout of the PCI bus under the VMD host bridge, so in order to identify the ACPI companion objects for the devices on that bus, it is necessary to use a special
_ADRencoding on the ACPI side. In other words,acpi_pci_find_companion()does not work for these devices, so it needs to be amended with a special lookup logic specific to the VMD bus.Address this issue by allowing the VMD driver to temporarily install an ACPI companion lookup hook containing the code matching the devices on the VMD PCI bus with the corresponding objects in the ACPI namespace.
Signed-off-by Rafael J. Wysocki <[email protected]>---
-> v2:
* Use a read-write semaphore for hook manipulation protection and get rid of the static key present in the previous version.
* Add a busnr check invmd_acpi_find_companion().Wendy, David, please test this one!
--- drivers/pci/controller/vmd.c | 55 +++++++++++++++++++++++++++++++ drivers/pci/host-bridge.c | 1 drivers/pci/pci-acpi.c | 74 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci-acpi.h | 3 + 4 files changed, 133 insertions(+)Index:
linux-pm/drivers/pci/controller/vmd.c
===================================================================drivers/pci/controller/vmd.c +54
-0@@ -11,6 +11,7 @@#include <linux/module.h> #include <linux/msi.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/pci-ecam.h> #include <linux/srcu.h> #include <linux/rculist.h> @@ -447,6 +448,56 @@ static struct pci_ops vmd_ops = { .write = vmd_pci_write, }; +#ifdef CONFIG_ACPI +static struct acpi_device *vmd_acpi_find_companion (struct pci_dev +*pci_dev) { +struct pci_host_bridge *bridge; +u32 busnr, addr; + +if (pci_dev->bus->ops != &vmd_ops) +return NULL ; + + bridge =pci_find_host_bridge (pci_dev->bus); + busnr = pci_dev->bus->number - bridge->bus->number; +/* +* The address computation below is only applicable to relative bus +* numbers below 32. +*/ +if (busnr >31 ) +return NULL ; + + addr = (busnr <<24 ) | ((u32 )pci_dev->devfn <<16 ) |0x8000FFFFU ; + +dev_dbg (&pci_dev->dev,"Looking for ACPI companion (address 0x%x)\n" , + addr); + +return acpi_find_child_device (ACPI_COMPANION (bridge->dev.parent), addr, + false); +} + +static bool hook_installed; + +static void vmd_acpi_begin (void ) +{ +if (pci_acpi_set_companion_lookup_hook (vmd_acpi_find_companion)) +return ; + + hook_installed = true; +} + +static void vmd_acpi_end (void ) +{ +if (!hook_installed) +return ; + +pci_acpi_clear_companion_lookup_hook (); + hook_installed = false; +} +#else +static inline void vmd_acpi_begin (void ) { }static inline void +vmd_acpi_end (void ) { }#endif /* CONFIG_ACPI */ +static void vmd_attach_resources (struct vmd_dev *vmd) { vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; @@ -747,6 +798,8 @@ static int vmd_enable_domain(struct vmd_ if (vmd->irq_domain) dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); +vmd_acpi_begin (); +pci_scan_child_bus (vmd->bus);pci_assign_unassigned_bus_resources (vmd->bus);@@ -760,6 +813,8 @@ static int vmd_enable_domain(struct vmd_pci_bus_add_devices (vmd->bus); +vmd_acpi_end (); +WARN (sysfs_create_link (&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,"domain" ),"Can't create symlink to domain\n" );return 0 ;Index:
linux-pm/drivers/pci/host-bridge.c
===================================================================drivers/pci/host-bridge.c +1
-0@@ -23,6 +23,7 @@ struct pci_host_bridge *pci_find_host_brreturn to_pci_host_bridge (root_bus->bridge); } +EXPORT_SYMBOL_GPL (pci_find_host_bridge);struct device *pci_get_host_bridge_device (struct pci_dev *dev) {Index:
linux-pm/drivers/pci/pci-acpi.c
===================================================================drivers/pci/pci-acpi.c +83
-0@@ -17,6 +17,7 @@#include <linux/pci-acpi.h> #include <linux/pm_runtime.h> #include <linux/pm_qos.h> +#include <linux/rwsem.h> #include "pci.h" /* @@ -1159,6 +1160,69 @@ void acpi_pci_remove_bus(struct pci_bus }/* ACPI bus type */ + + +static DECLARE_RWSEM (pci_acpi_companion_lookup_sem); +static struct acpi_device *(*pci_acpi_find_companion_hook)(struct +pci_dev *); + +/** +* pci_acpi_set_companion_lookup_hook - Set ACPI companion lookup callback. +* @func: ACPI companion lookup callback pointer or NULL. +* +* Set a special ACPI companion lookup callback for PCI devices whose +companion +* objects in the ACPI namespace have _ADR with non-standard +bus-device-function +* encodings. +* +* Return 0 on success or a negative error code on failure (in which +case no +* changes are made). +* +* The caller is responsible for the appropriate ordering of the +invocations of +* this function with respect to the enumeration of the PCI devices +needing the +* callback installed by it. +*/ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *)) { +int ret; + +if (!func) +return -EINVAL ; + +down_write (&pci_acpi_companion_lookup_sem); + +if (pci_acpi_find_companion_hook) { + ret = -EBUSY ; + }else { + pci_acpi_find_companion_hook = func; + ret =0 ; + } + +up_write (&pci_acpi_companion_lookup_sem); + +return ret; +} +EXPORT_SYMBOL_GPL (pci_acpi_set_companion_lookup_hook); + +/** +* pci_acpi_clear_companion_lookup_hook - Clear ACPI companion lookup callback. +* +* Clear the special ACPI companion lookup callback previously set by +* pci_acpi_set_companion_lookup_hook(). Block until the last running +instance +* of the callback returns before clearing it. +* +* The caller is responsible for the appropriate ordering of the +invocations of +* this function with respect to the enumeration of the PCI devices +needing the +* callback cleared by it. +*/ +void pci_acpi_clear_companion_lookup_hook (void ) +{ +down_write (&pci_acpi_companion_lookup_sem); + + pci_acpi_find_companion_hook =NULL ; + +up_write (&pci_acpi_companion_lookup_sem); +} +EXPORT_SYMBOL_GPL (pci_acpi_clear_companion_lookup_hook); +static struct acpi_device *acpi_pci_find_companion (struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -1166,6 +1230,16 @@ static struct acpi_device *acpi_pci_findbool check_children;u64 addr; +down_read (&pci_acpi_companion_lookup_sem); + + adev = pci_acpi_find_companion_hook ? +pci_acpi_find_companion_hook (pci_dev) :NULL ; + +up_read (&pci_acpi_companion_lookup_sem); + +if (adev) +return adev; + check_children =pci_is_bridge (pci_dev);/* Please ref to ACPI spec for the syntax of _ADR */ addr = (PCI_SLOT (pci_dev->devfn) <<16 ) |PCI_FUNC (pci_dev->devfn);Index:
linux-pm/include/linux/pci-acpi.h===================================================================include/linux/pci-acpi.h +4
-0@@ -122,6 +122,9 @@ static inline void pci_acpi_add_edr_noti static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { } #endif /* CONFIG_PCIE_EDR */ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *));void +pci_acpi_clear_companion_lookup_hook (void ); +#else /* CONFIG_ACPI */ static inline void acpi_pci_add_bus (struct pci_bus *bus) { }static inline void acpi_pci_remove_bus (struct pci_bus *bus) { }
Quoted 17 lines · Wendy
Hi Rafael,
Tested this PATCH v2 against intel next v5.12 kernel on ADL-S NVME and SATA storages:
cat /sys/devices/pci0000\:00/0000\:00\:0e.0/firmware_node/path \_SB_.PC00.VMD0
10000:e0:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
10000:e0:1d.0 System peripheral: Intel Corporation Device 09ab
10000:e0:1d.4 PCI bridge: Intel Corporation Device 7ab4 (rev 11)
10000:e1:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO[ 6193.658074] ahci 10000:e0:17.0: PCI PM: Suspend power state: D3hot [ 6193.658156] nvme 10000:e1:00.0: PCI PM: Suspend power state: D3hot [ 6193.710883] pcieport 10000:e0:1d.4: PCI PM: Suspend power state: D3cold [ 6193.730318] vmd 0000:00:0e.0: PCI PM: Suspend power state: D3hot
Quoted 6 lines
cat
/sys/kernel/debug/pmc_core/substate_residenciesSubstate Residency S0i2.0 0 S0i2.1 13862128Thanks!
I guess (given Rafael's response) that this is a positive test result, i.e., you see the desired behavior with this patch?
Bjorn
Quoted 244 lines
-----Original Message-----
From: Rafael J. Wysocki <[email protected]>
Sent: Tuesday, August 24, 2021 10:44 PM
To: Linux PCI <[email protected]>; Derrick, Jonathan <[email protected]>; Bjorn Helgaas <[email protected]>
Cc: Wang, Wendy <[email protected]>; Linux ACPI <[email protected]>; LKML <[email protected]>; Mika Westerberg <[email protected]>; David Box <[email protected]>
Subject: [PATCH v2] PCI: VMD: ACPI: Make ACPI companion lookup work for VMD busFrom: Rafael J. Wysocki <[email protected]>
On some systems, in order to get to the deepest low-power state of the platform (which may be necessary to save significant enough amounts of energy while suspended to idle. for example), devices on the PCI bus exposed by the VMD driver need to be power-managed via ACPI. However, the layout of the ACPI namespace below the VMD controller device object does not reflect the layout of the PCI bus under the VMD host bridge, so in order to identify the ACPI companion objects for the devices on that bus, it is necessary to use a special
_ADRencoding on the ACPI side. In other words,acpi_pci_find_companion()does not work for these devices, so it needs to be amended with a special lookup logic specific to the VMD bus.Address this issue by allowing the VMD driver to temporarily install an ACPI companion lookup hook containing the code matching the devices on the VMD PCI bus with the corresponding objects in the ACPI namespace.
Signed-off-by Rafael J. Wysocki <[email protected]>---
-> v2:
* Use a read-write semaphore for hook manipulation protection and get rid of the static key present in the previous version.
* Add a busnr check invmd_acpi_find_companion().Wendy, David, please test this one!
--- drivers/pci/controller/vmd.c | 55 +++++++++++++++++++++++++++++++ drivers/pci/host-bridge.c | 1 drivers/pci/pci-acpi.c | 74 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci-acpi.h | 3 + 4 files changed, 133 insertions(+)Index:
linux-pm/drivers/pci/controller/vmd.c
===================================================================drivers/pci/controller/vmd.c +54
-0@@ -11,6 +11,7 @@#include <linux/module.h> #include <linux/msi.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/pci-ecam.h> #include <linux/srcu.h> #include <linux/rculist.h> @@ -447,6 +448,56 @@ static struct pci_ops vmd_ops = { .write = vmd_pci_write, }; +#ifdef CONFIG_ACPI +static struct acpi_device *vmd_acpi_find_companion (struct pci_dev +*pci_dev) { +struct pci_host_bridge *bridge; +u32 busnr, addr; + +if (pci_dev->bus->ops != &vmd_ops) +return NULL ; + + bridge =pci_find_host_bridge (pci_dev->bus); + busnr = pci_dev->bus->number - bridge->bus->number; +/* +* The address computation below is only applicable to relative bus +* numbers below 32. +*/ +if (busnr >31 ) +return NULL ; + + addr = (busnr <<24 ) | ((u32 )pci_dev->devfn <<16 ) |0x8000FFFFU ; + +dev_dbg (&pci_dev->dev,"Looking for ACPI companion (address 0x%x)\n" , + addr); + +return acpi_find_child_device (ACPI_COMPANION (bridge->dev.parent), addr, + false); +} + +static bool hook_installed; + +static void vmd_acpi_begin (void ) +{ +if (pci_acpi_set_companion_lookup_hook (vmd_acpi_find_companion)) +return ; + + hook_installed = true; +} + +static void vmd_acpi_end (void ) +{ +if (!hook_installed) +return ; + +pci_acpi_clear_companion_lookup_hook (); + hook_installed = false; +} +#else +static inline void vmd_acpi_begin (void ) { }static inline void +vmd_acpi_end (void ) { }#endif /* CONFIG_ACPI */ +static void vmd_attach_resources (struct vmd_dev *vmd) { vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; @@ -747,6 +798,8 @@ static int vmd_enable_domain(struct vmd_ if (vmd->irq_domain) dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); +vmd_acpi_begin (); +pci_scan_child_bus (vmd->bus);pci_assign_unassigned_bus_resources (vmd->bus);@@ -760,6 +813,8 @@ static int vmd_enable_domain(struct vmd_pci_bus_add_devices (vmd->bus); +vmd_acpi_end (); +WARN (sysfs_create_link (&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,"domain" ),"Can't create symlink to domain\n" );return 0 ;Index:
linux-pm/drivers/pci/host-bridge.c
===================================================================drivers/pci/host-bridge.c +1
-0@@ -23,6 +23,7 @@ struct pci_host_bridge *pci_find_host_brreturn to_pci_host_bridge (root_bus->bridge); } +EXPORT_SYMBOL_GPL (pci_find_host_bridge);struct device *pci_get_host_bridge_device (struct pci_dev *dev) {Index:
linux-pm/drivers/pci/pci-acpi.c
===================================================================drivers/pci/pci-acpi.c +83
-0@@ -17,6 +17,7 @@#include <linux/pci-acpi.h> #include <linux/pm_runtime.h> #include <linux/pm_qos.h> +#include <linux/rwsem.h> #include "pci.h" /* @@ -1159,6 +1160,69 @@ void acpi_pci_remove_bus(struct pci_bus }/* ACPI bus type */ + + +static DECLARE_RWSEM (pci_acpi_companion_lookup_sem); +static struct acpi_device *(*pci_acpi_find_companion_hook)(struct +pci_dev *); + +/** +* pci_acpi_set_companion_lookup_hook - Set ACPI companion lookup callback. +* @func: ACPI companion lookup callback pointer or NULL. +* +* Set a special ACPI companion lookup callback for PCI devices whose +companion +* objects in the ACPI namespace have _ADR with non-standard +bus-device-function +* encodings. +* +* Return 0 on success or a negative error code on failure (in which +case no +* changes are made). +* +* The caller is responsible for the appropriate ordering of the +invocations of +* this function with respect to the enumeration of the PCI devices +needing the +* callback installed by it. +*/ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *)) { +int ret; + +if (!func) +return -EINVAL ; + +down_write (&pci_acpi_companion_lookup_sem); + +if (pci_acpi_find_companion_hook) { + ret = -EBUSY ; + }else { + pci_acpi_find_companion_hook = func; + ret =0 ; + } + +up_write (&pci_acpi_companion_lookup_sem); + +return ret; +} +EXPORT_SYMBOL_GPL (pci_acpi_set_companion_lookup_hook); + +/** +* pci_acpi_clear_companion_lookup_hook - Clear ACPI companion lookup callback. +* +* Clear the special ACPI companion lookup callback previously set by +* pci_acpi_set_companion_lookup_hook(). Block until the last running +instance +* of the callback returns before clearing it. +* +* The caller is responsible for the appropriate ordering of the +invocations of +* this function with respect to the enumeration of the PCI devices +needing the +* callback cleared by it. +*/ +void pci_acpi_clear_companion_lookup_hook (void ) +{ +down_write (&pci_acpi_companion_lookup_sem); + + pci_acpi_find_companion_hook =NULL ; + +up_write (&pci_acpi_companion_lookup_sem); +} +EXPORT_SYMBOL_GPL (pci_acpi_clear_companion_lookup_hook); +static struct acpi_device *acpi_pci_find_companion (struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -1166,6 +1230,16 @@ static struct acpi_device *acpi_pci_findbool check_children;u64 addr; +down_read (&pci_acpi_companion_lookup_sem); + + adev = pci_acpi_find_companion_hook ? +pci_acpi_find_companion_hook (pci_dev) :NULL ; + +up_read (&pci_acpi_companion_lookup_sem); + +if (adev) +return adev; + check_children =pci_is_bridge (pci_dev);/* Please ref to ACPI spec for the syntax of _ADR */ addr = (PCI_SLOT (pci_dev->devfn) <<16 ) |PCI_FUNC (pci_dev->devfn);Index:
linux-pm/include/linux/pci-acpi.h===================================================================include/linux/pci-acpi.h +4
-0@@ -122,6 +122,9 @@ static inline void pci_acpi_add_edr_noti static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { } #endif /* CONFIG_PCIE_EDR */ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *));void +pci_acpi_clear_companion_lookup_hook (void ); +#else /* CONFIG_ACPI */ static inline void acpi_pci_add_bus (struct pci_bus *bus) { }static inline void acpi_pci_remove_bus (struct pci_bus *bus) { }
Rafael J. Wysocki
maintainerQuoted 9 lines · Bjorn Helgaas
Quoted 7 lines · Wendy
Hi Rafael,
Tested this PATCH v2 against intel next v5.12 kernel on ADL-S NVME and SATA storages:
cat /sys/devices/pci0000\:00/0000\:00\:0e.0/firmware_node/path \_SB_.PC00.VMD0
Quoted 8 lines
Quoted 8 lines
10000:e0:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
10000:e0:1d.0 System peripheral: Intel Corporation Device 09ab
10000:e0:1d.4 PCI bridge: Intel Corporation Device 7ab4 (rev 11)
10000:e1:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO[ 6193.658074] ahci 10000:e0:17.0: PCI PM: Suspend power state: D3hot [ 6193.658156] nvme 10000:e1:00.0: PCI PM: Suspend power state: D3hot [ 6193.710883] pcieport 10000:e0:1d.4: PCI PM: Suspend power state: D3cold
This doesn't happen without using the ACPI companion object (the deepest power state you can get then is D3hot) AFAICS.
Quoted 11 lines
Quoted 8 lines
[ 6193.730318] vmd 0000:00:0e.0: PCI PM: Suspend power state: D3hotcat
/sys/kernel/debug/pmc_core/substate_residenciesSubstate Residency S0i2.0 0 S0i2.1 13862128Thanks!
I guess (given Rafael's response) that this is a positive test result, i.e., you see the desired behavior with this patch?
So yes.
Quoted 244 lines
Quoted 244 lines
-----Original Message-----
From: Rafael J. Wysocki <[email protected]>
Sent: Tuesday, August 24, 2021 10:44 PM
To: Linux PCI <[email protected]>; Derrick, Jonathan <[email protected]>; Bjorn Helgaas <[email protected]>
Cc: Wang, Wendy <[email protected]>; Linux ACPI <[email protected]>; LKML <[email protected]>; Mika Westerberg <[email protected]>; David Box <[email protected]>
Subject: [PATCH v2] PCI: VMD: ACPI: Make ACPI companion lookup work for VMD busFrom: Rafael J. Wysocki <[email protected]>
On some systems, in order to get to the deepest low-power state of the platform (which may be necessary to save significant enough amounts of energy while suspended to idle. for example), devices on the PCI bus exposed by the VMD driver need to be power-managed via ACPI. However, the layout of the ACPI namespace below the VMD controller device object does not reflect the layout of the PCI bus under the VMD host bridge, so in order to identify the ACPI companion objects for the devices on that bus, it is necessary to use a special
_ADRencoding on the ACPI side. In other words,acpi_pci_find_companion()does not work for these devices, so it needs to be amended with a special lookup logic specific to the VMD bus.Address this issue by allowing the VMD driver to temporarily install an ACPI companion lookup hook containing the code matching the devices on the VMD PCI bus with the corresponding objects in the ACPI namespace.
Signed-off-by Rafael J. Wysocki <[email protected]>---
-> v2:
* Use a read-write semaphore for hook manipulation protection and get rid of the static key present in the previous version.
* Add a busnr check invmd_acpi_find_companion().Wendy, David, please test this one!
--- drivers/pci/controller/vmd.c | 55 +++++++++++++++++++++++++++++++ drivers/pci/host-bridge.c | 1 drivers/pci/pci-acpi.c | 74 +++++++++++++++++++++++++++++++++++++++++++ include/linux/pci-acpi.h | 3 + 4 files changed, 133 insertions(+)Index:
linux-pm/drivers/pci/controller/vmd.c
===================================================================drivers/pci/controller/vmd.c +54
-0@@ -11,6 +11,7 @@#include <linux/module.h> #include <linux/msi.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/pci-ecam.h> #include <linux/srcu.h> #include <linux/rculist.h> @@ -447,6 +448,56 @@ static struct pci_ops vmd_ops = { .write = vmd_pci_write, }; +#ifdef CONFIG_ACPI +static struct acpi_device *vmd_acpi_find_companion (struct pci_dev +*pci_dev) { +struct pci_host_bridge *bridge; +u32 busnr, addr; + +if (pci_dev->bus->ops != &vmd_ops) +return NULL ; + + bridge =pci_find_host_bridge (pci_dev->bus); + busnr = pci_dev->bus->number - bridge->bus->number; +/* +* The address computation below is only applicable to relative bus +* numbers below 32. +*/ +if (busnr >31 ) +return NULL ; + + addr = (busnr <<24 ) | ((u32 )pci_dev->devfn <<16 ) |0x8000FFFFU ; + +dev_dbg (&pci_dev->dev,"Looking for ACPI companion (address 0x%x)\n" , + addr); + +return acpi_find_child_device (ACPI_COMPANION (bridge->dev.parent), addr, + false); +} + +static bool hook_installed; + +static void vmd_acpi_begin (void ) +{ +if (pci_acpi_set_companion_lookup_hook (vmd_acpi_find_companion)) +return ; + + hook_installed = true; +} + +static void vmd_acpi_end (void ) +{ +if (!hook_installed) +return ; + +pci_acpi_clear_companion_lookup_hook (); + hook_installed = false; +} +#else +static inline void vmd_acpi_begin (void ) { }static inline void +vmd_acpi_end (void ) { }#endif /* CONFIG_ACPI */ +static void vmd_attach_resources (struct vmd_dev *vmd) { vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; @@ -747,6 +798,8 @@ static int vmd_enable_domain(struct vmd_ if (vmd->irq_domain) dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); +vmd_acpi_begin (); +pci_scan_child_bus (vmd->bus);pci_assign_unassigned_bus_resources (vmd->bus);@@ -760,6 +813,8 @@ static int vmd_enable_domain(struct vmd_pci_bus_add_devices (vmd->bus); +vmd_acpi_end (); +WARN (sysfs_create_link (&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,"domain" ),"Can't create symlink to domain\n" );return 0 ;Index:
linux-pm/drivers/pci/host-bridge.c
===================================================================drivers/pci/host-bridge.c +1
-0@@ -23,6 +23,7 @@ struct pci_host_bridge *pci_find_host_brreturn to_pci_host_bridge (root_bus->bridge); } +EXPORT_SYMBOL_GPL (pci_find_host_bridge);struct device *pci_get_host_bridge_device (struct pci_dev *dev) {Index:
linux-pm/drivers/pci/pci-acpi.c
===================================================================drivers/pci/pci-acpi.c +83
-0@@ -17,6 +17,7 @@#include <linux/pci-acpi.h> #include <linux/pm_runtime.h> #include <linux/pm_qos.h> +#include <linux/rwsem.h> #include "pci.h" /* @@ -1159,6 +1160,69 @@ void acpi_pci_remove_bus(struct pci_bus }/* ACPI bus type */ + + +static DECLARE_RWSEM (pci_acpi_companion_lookup_sem); +static struct acpi_device *(*pci_acpi_find_companion_hook)(struct +pci_dev *); + +/** +* pci_acpi_set_companion_lookup_hook - Set ACPI companion lookup callback. +* @func: ACPI companion lookup callback pointer or NULL. +* +* Set a special ACPI companion lookup callback for PCI devices whose +companion +* objects in the ACPI namespace have _ADR with non-standard +bus-device-function +* encodings. +* +* Return 0 on success or a negative error code on failure (in which +case no +* changes are made). +* +* The caller is responsible for the appropriate ordering of the +invocations of +* this function with respect to the enumeration of the PCI devices +needing the +* callback installed by it. +*/ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *)) { +int ret; + +if (!func) +return -EINVAL ; + +down_write (&pci_acpi_companion_lookup_sem); + +if (pci_acpi_find_companion_hook) { + ret = -EBUSY ; + }else { + pci_acpi_find_companion_hook = func; + ret =0 ; + } + +up_write (&pci_acpi_companion_lookup_sem); + +return ret; +} +EXPORT_SYMBOL_GPL (pci_acpi_set_companion_lookup_hook); + +/** +* pci_acpi_clear_companion_lookup_hook - Clear ACPI companion lookup callback. +* +* Clear the special ACPI companion lookup callback previously set by +* pci_acpi_set_companion_lookup_hook(). Block until the last running +instance +* of the callback returns before clearing it. +* +* The caller is responsible for the appropriate ordering of the +invocations of +* this function with respect to the enumeration of the PCI devices +needing the +* callback cleared by it. +*/ +void pci_acpi_clear_companion_lookup_hook (void ) +{ +down_write (&pci_acpi_companion_lookup_sem); + + pci_acpi_find_companion_hook =NULL ; + +up_write (&pci_acpi_companion_lookup_sem); +} +EXPORT_SYMBOL_GPL (pci_acpi_clear_companion_lookup_hook); +static struct acpi_device *acpi_pci_find_companion (struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -1166,6 +1230,16 @@ static struct acpi_device *acpi_pci_findbool check_children;u64 addr; +down_read (&pci_acpi_companion_lookup_sem); + + adev = pci_acpi_find_companion_hook ? +pci_acpi_find_companion_hook (pci_dev) :NULL ; + +up_read (&pci_acpi_companion_lookup_sem); + +if (adev) +return adev; + check_children =pci_is_bridge (pci_dev);/* Please ref to ACPI spec for the syntax of _ADR */ addr = (PCI_SLOT (pci_dev->devfn) <<16 ) |PCI_FUNC (pci_dev->devfn);Index:
linux-pm/include/linux/pci-acpi.h===================================================================include/linux/pci-acpi.h +4
-0@@ -122,6 +122,9 @@ static inline void pci_acpi_add_edr_noti static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { } #endif /* CONFIG_PCIE_EDR */ +int pci_acpi_set_companion_lookup_hook (struct acpi_device +*(*func)(struct pci_dev *));void +pci_acpi_clear_companion_lookup_hook (void ); +#else /* CONFIG_ACPI */ static inline void acpi_pci_add_bus (struct pci_bus *bus) { }static inline void acpi_pci_remove_bus (struct pci_bus *bus) { }
Jon Derrick
Acked-byQuoted 29 lines · Rafael J. Wysocki
Quoted 9 lines · Bjorn Helgaas
Quoted 7 lines · Wendy
Hi Rafael,
Tested this PATCH v2 against intel next v5.12 kernel on ADL-S NVME and SATA storages:
cat /sys/devices/pci0000\:00/0000\:00\:0e.0/firmware_node/path \_SB_.PC00.VMD0
Quoted 8 lines
Quoted 8 lines
10000:e0:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
10000:e0:1d.0 System peripheral: Intel Corporation Device 09ab
10000:e0:1d.4 PCI bridge: Intel Corporation Device 7ab4 (rev 11)
10000:e1:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO[ 6193.658074] ahci 10000:e0:17.0: PCI PM: Suspend power state: D3hot [ 6193.658156] nvme 10000:e1:00.0: PCI PM: Suspend power state: D3hot [ 6193.710883] pcieport 10000:e0:1d.4: PCI PM: Suspend power state: D3coldThis doesn't happen without using the ACPI companion object (the deepest power state you can get then is D3hot) AFAICS.
Quoted 7 lines
Quoted 7 lines
[ 6193.730318] vmd 0000:00:0e.0: PCI PM: Suspend power state: D3hotcat
/sys/kernel/debug/pmc_core/substate_residenciesSubstate Residency S0i2.0 0 S0i2.1 13862128
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Thanks!
I guess (given Rafael's response) that this is a positive test result, i.e., you see the desired behavior with this patch?
So yes.
LGTM then
Rafael J. Wysocki
maintainerQuoted 35 lines · Jon Derrick
Quoted 31 lines · Rafael J. Wysocki
Quoted 9 lines · Bjorn Helgaas
Quoted 7 lines · Wendy
Hi Rafael,
Tested this PATCH v2 against intel next v5.12 kernel on ADL-S NVME and SATA storages:
cat /sys/devices/pci0000\:00/0000\:00\:0e.0/firmware_node/path \_SB_.PC00.VMD0
Quoted 8 lines
Quoted 8 lines
10000:e0:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
10000:e0:1d.0 System peripheral: Intel Corporation Device 09ab
10000:e0:1d.4 PCI bridge: Intel Corporation Device 7ab4 (rev 11)
10000:e1:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO[ 6193.658074] ahci 10000:e0:17.0: PCI PM: Suspend power state: D3hot [ 6193.658156] nvme 10000:e1:00.0: PCI PM: Suspend power state: D3hot [ 6193.710883] pcieport 10000:e0:1d.4: PCI PM: Suspend power state: D3coldThis doesn't happen without using the ACPI companion object (the deepest power state you can get then is D3hot) AFAICS.
Quoted 9 lines
Quoted 8 lines
[ 6193.730318] vmd 0000:00:0e.0: PCI PM: Suspend power state: D3hotcat
/sys/kernel/debug/pmc_core/substate_residenciesSubstate Residency S0i2.0 0 S0i2.1 13862128Thanks!
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
I guess (given Rafael's response) that this is a positive test result, i.e., you see the desired behavior with this patch?
So yes.
LGTM then
Acked-by Jon Derrick <[email protected]>
Thank you!
It doesn't look like there are any concerns regarding this patch, so I'll queue it up for merging next week.