Skip to contentSkip to conversation

UCSI work

RFC PATCH New Heikki Krogerus 1 participant 8 messages Aug 26, 2021

Subsystems (2)
lore
Share & tools
lore

Heikki Krogerus

author maintainer
#0 lore raw

cover UCSI work

Hi Ulrich,

This is the series that I'm hoping solves the issue you reported [1]. Let me know if you can test them, and if these work for you. The exact patch that you are are probable most interested in is the very last one of the series.

Note. The series is still WIP.

thanks,

Heikki Krogerus (7):
usb: typec: ucsi: Always cancel the command if PPM reports BUSY
condition
usb: typec: ucsi: Don't stop alt mode registration on busy condition
usb: typec: ucsi: Add polling mechanism for partner tasks like alt
mode checking
usb: typec: ucsi: acpi: Reduce the command completion timeout
usb: typec: ucsi: Check the partner alt modes always if there is PD
contract
usb: typec: ucsi: Read the PDOs in separate work
usb: typec: ucsi: Better fix for missing unplug events issue

 drivers/usb/typec/ucsi/ucsi.c      | 341 ++++++++++++++---------------
 drivers/usb/typec/ucsi/ucsi.h      |   3 +-
 drivers/usb/typec/ucsi/ucsi_acpi.c |   2 +-
 3 files changed, 166 insertions(+), 180 deletions(-)
Signature · 1 line
2.32.0
author maintainer
#1 lore raw

RFC PATCH 1/7 usb: typec: ucsi: Always cancel the command if PPM reports BUSY condition

This makes it possible to execute next command immediately after the busy condition.

---
 drivers/usb/typec/ucsi/ucsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/typec/ucsi/ucsi.c +3 -1
index 5ef5bd0e87cf2..ffb5be51daf85 100644
@@ -128,8 +128,10 @@ static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd)
 	if (ret)
 		return ret;
 
-	if (cci & UCSI_CCI_BUSY)
+	if (cci & UCSI_CCI_BUSY) {
+		ucsi->ops->async_write(ucsi, UCSI_CANCEL, NULL, 0);
 		return -EBUSY;
+	}
 
 	if (!(cci & UCSI_CCI_COMMAND_COMPLETE))
 		return -EIO;
Signature · 1 line
2.32.0
author maintainer
#2 lore raw

RFC PATCH 2/7 usb: typec: ucsi: Don't stop alt mode registration on busy condition

In reply to Heikki Krogerus

If the PPM says it's busy, we can now simply try again.

---
 drivers/usb/typec/ucsi/ucsi.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/typec/ucsi/ucsi.c +2 -0
index ffb5be51daf85..a35efd8174bd4 100644
@@ -437,6 +437,8 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
 		command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num);
 		command |= UCSI_GET_ALTMODE_OFFSET(i);
 		len = ucsi_send_command(con->ucsi, command, alt, sizeof(alt));
+		if (len == -EBUSY)
+			continue;
 		if (len <= 0)
 			return len;
 
Signature · 1 line
2.32.0
author maintainer
#3 lore raw

RFC PATCH 3/7 usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking

In reply to Heikki Krogerus

The "poll worker" that is introduced here is first used for checking partner alternate modes, but it can later be used for any partner task that requires a separate job to be scheduled to the connector specific workqueues.

The mechanism allows the partner device specific tasks to be polling tasks and also delayed tasks if necessary.

By polling the partner alternate modes with this mechanism the long command completion timeout value can be reduced back to normal. The long command completion timeout was only used to work around a problem on some platforms where the EC firmware (PPM) didn't return BUSY even when it should with the alt mode commands.

---
 drivers/usb/typec/ucsi/ucsi.c | 119 ++++++++++++++++++++++++++++------
 drivers/usb/typec/ucsi/ucsi.h |   1 +
 2 files changed, 101 insertions(+), 19 deletions(-)
drivers/usb/typec/ucsi/ucsi.c +100 -19
index a35efd8174bd4..8af292141fe7b 100644
@@ -191,6 +191,64 @@ int ucsi_resume(struct ucsi *ucsi)
 EXPORT_SYMBOL_GPL(ucsi_resume);
 /* -------------------------------------------------------------------------- */
 
+struct ucsi_work {
+	struct delayed_work work;
+	unsigned long delay;
+	unsigned int count;
+	struct ucsi_connector *con;
+	int (*cb)(struct ucsi_connector *);
+};
+
+static void ucsi_poll_worker(struct work_struct *work)
+{
+	struct ucsi_work *uwork = container_of(work, struct ucsi_work, work.work);
+	struct ucsi_connector *con = uwork->con;
+	int ret;
+
+	mutex_lock(&con->lock);
+
+	if (!con->partner) {
+		mutex_unlock(&con->lock);
+		kfree(uwork);
+		return;
+	}
+
+	ret = uwork->cb(con);
+
+	if (uwork->count-- && (ret == -EBUSY || ret == -ETIMEDOUT))
+		queue_delayed_work(con->wq, &uwork->work, uwork->delay);
+	else
+		kfree(uwork);
+
+	mutex_unlock(&con->lock);
+}
+
+static int ucsi_partner_task(struct ucsi_connector *con,
+			     int (*cb)(struct ucsi_connector *),
+			     int retries, unsigned long delay)
+{
+	struct ucsi_work *uwork;
+
+	if (!con->partner)
+		return 0;
+
+	uwork = kzalloc(sizeof(*uwork), GFP_KERNEL);
+	if (!uwork)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&uwork->work, ucsi_poll_worker);
+	uwork->count = retries;
+	uwork->delay = delay;
+	uwork->con = con;
+	uwork->cb = cb;
+
+	queue_delayed_work(con->wq, &uwork->work, delay);
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
 void ucsi_altmode_update_active(struct ucsi_connector *con)
 {
 	const struct typec_altmode *altmode = NULL;
@@ -543,6 +601,25 @@ static void ucsi_get_src_pdos(struct ucsi_connector *con, int is_partner)
 	con->num_pdos += ret / sizeof(u32);
 }
 
+static int ucsi_check_altmodes(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+	if (ret && ret != -ETIMEDOUT)
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register partner alt modes (%d)\n",
+			con->num, ret);
+
+	/* Ignoring the errors in this case. */
+	if (con->partner_altmode[0]) {
+		ucsi_altmode_update_active(con);
+		return 0;
+	}
+
+	return ret;
+}
+
 static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 {
 	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
@@ -650,14 +727,7 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 		dev_err(con->ucsi->dev, "con:%d: failed to set usb role:%d\n",
 			con->num, u_role);
 
-	/* Can't rely on Partner Flags field. Always checking the alt modes. */
-	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
-	if (ret)
-		dev_err(con->ucsi->dev,
-			"con%d: failed to register partner alternate modes\n",
-			con->num);
-	else
-		ucsi_altmode_update_active(con);
+	ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
 }
 
 static void ucsi_handle_connector_change(struct work_struct *work)
@@ -1045,8 +1115,18 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	enum typec_accessory *accessory = cap->accessory;
 	enum usb_role u_role = USB_ROLE_NONE;
 	u64 command;
+	char *name;
 	int ret;
 
+	name = kasprintf(GFP_KERNEL, "%s-con%d", dev_name(ucsi->dev), con->num);
+	if (!name)
+		return -ENOMEM;
+
+	con->wq = create_singlethread_workqueue(name);
+	kfree(name);
+	if (!con->wq)
+		return -ENOMEM;
+
 	INIT_WORK(&con->work, ucsi_handle_connector_change);
 	init_completion(&con->complete);
 	mutex_init(&con->lock);
@@ -1164,17 +1244,8 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 		ret = 0;
 	}
 
-	if (con->partner) {
-		ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
-		if (ret) {
-			dev_err(ucsi->dev,
-				"con%d: failed to register alternate modes\n",
-				con->num);
-			ret = 0;
-		} else {
-			ucsi_altmode_update_active(con);
-		}
-	}
+	if (con->partner)
+		ucsi_check_altmodes(con);
 
 	trace_ucsi_register_port(con->num, &con->status);
 
@@ -1182,6 +1253,12 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	fwnode_handle_put(cap->fwnode);
 out_unlock:
 	mutex_unlock(&con->lock);
+
+	if (ret && con->wq) {
+		destroy_workqueue(con->wq);
+		con->wq = NULL;
+	}
+
 	return ret;
 }
 
@@ -1252,6 +1329,8 @@ static int ucsi_init(struct ucsi *ucsi)
 		ucsi_unregister_partner(con);
 		ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
 		ucsi_unregister_port_psy(con);
+		if (con->wq)
+			destroy_workqueue(con->wq);
 		typec_unregister_port(con->port);
 		con->port = NULL;
 	}
@@ -1374,6 +1453,8 @@ void ucsi_unregister(struct ucsi *ucsi)
 		ucsi_unregister_altmodes(&ucsi->connector[i],
 					 UCSI_RECIPIENT_CON);
 		ucsi_unregister_port_psy(&ucsi->connector[i]);
+		if (ucsi->connector[i].wq)
+			destroy_workqueue(ucsi->connector[i].wq);
 		typec_unregister_port(ucsi->connector[i].port);
 	}
 
drivers/usb/typec/ucsi/ucsi.h +1 -0
index cee666790907e..d10b8c24435af 100644
@@ -317,6 +317,7 @@ struct ucsi_connector {
 	struct mutex lock; /* port lock */
 	struct work_struct work;
 	struct completion complete;
+	struct workqueue_struct *wq;
 
 	struct typec_port *port;
 	struct typec_partner *partner;
Signature · 1 line
2.32.0
author maintainer
#4 lore raw

RFC PATCH 4/7 usb: typec: ucsi: acpi: Reduce the command completion timeout

In reply to Heikki Krogerus

The huge delay was there to workaround a problem where the firmware did not report that it was busy with the alternate mode commands. Now that the alternate modes are polled, the delay can be dropped.

---
 drivers/usb/typec/ucsi/ucsi_acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/typec/ucsi/ucsi_acpi.c +1 -1
index 04976435ad736..6771f05e32c29 100644
@@ -78,7 +78,7 @@ static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset,
 	if (ret)
 		goto out_clear_bit;
 
-	if (!wait_for_completion_timeout(&ua->complete, 60 * HZ))
+	if (!wait_for_completion_timeout(&ua->complete, HZ))
 		ret = -ETIMEDOUT;
 
 out_clear_bit:
Signature · 1 line
2.32.0
author maintainer
#5 lore raw

RFC PATCH 5/7 usb: typec: ucsi: Check the partner alt modes always if there is PD contract

In reply to Heikki Krogerus

UCSI does not tell the driver explicitly when the firmware (PPM in UCSI lingo) has actually detected the partner alternate modes, there is no specific change event for that. That's why they have to be checked with any notification that informs that PD contract with that partner has been achieved.

Previously the alternate modes were checked always when the firmware (PPM) informed that something with the partner had changed, but on some platforms the EC firmware does not generate separate events for generic partner changes at all. On those platforms the EC firmware notifies the driver only about connections, or separately about the PD contract if it was not achieved soon enough after the initial connection event.

---
 drivers/usb/typec/ucsi/ucsi.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/usb/typec/ucsi/ucsi.c +9 -5
index 8af292141fe7b..188181737acf0 100644
@@ -627,6 +627,7 @@ static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 		con->rdo = con->status.request_data_obj;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
 		ucsi_get_src_pdos(con, 1);
+		ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
 		break;
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
 		con->rdo = 0;
@@ -726,8 +727,6 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 	if (ret)
 		dev_err(con->ucsi->dev, "con:%d: failed to set usb role:%d\n",
 			con->num, u_role);
-
-	ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
 }
 
 static void ucsi_handle_connector_change(struct work_struct *work)
@@ -878,10 +877,15 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 			break;
 		}
 
-		if (con->status.flags & UCSI_CONSTAT_CONNECTED)
+		if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
 			ucsi_register_partner(con);
-		else
+
+			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
+			    UCSI_CONSTAT_PWR_OPMODE_PD)
+				ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
+		} else {
 			ucsi_unregister_partner(con);
+		}
 
 		ucsi_port_psy_changed(con);
 
@@ -1244,7 +1248,7 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 		ret = 0;
 	}
 
-	if (con->partner)
+	if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == UCSI_CONSTAT_PWR_OPMODE_PD)
 		ucsi_check_altmodes(con);
 
 	trace_ucsi_register_port(con->num, &con->status);
Signature · 1 line
2.32.0
author maintainer
#6 lore raw

RFC PATCH 6/7 usb: typec: ucsi: Read the PDOs in separate work

In reply to Heikki Krogerus

Polling also the PDOs, just like the alt modes.

After this ucsi_handle_connector_change() doesn't execute any commands.

---
 drivers/usb/typec/ucsi/ucsi.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)
drivers/usb/typec/ucsi/ucsi.c +17 -13
index 188181737acf0..e7267e47c3e4d 100644
@@ -571,7 +571,7 @@ static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
 	command |= UCSI_GET_PDOS_SRC_PDOS;
 	ret = ucsi_send_command(ucsi, command, pdos + offset,
 				num_pdos * sizeof(u32));
-	if (ret < 0)
+	if (ret < 0 && ret != -ETIMEDOUT)
 		dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret);
 	if (ret == 0 && offset == 0)
 		dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n");
@@ -579,26 +579,30 @@ static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
 	return ret;
 }
 
-static void ucsi_get_src_pdos(struct ucsi_connector *con, int is_partner)
+static int ucsi_get_src_pdos(struct ucsi_connector *con)
 {
 	int ret;
 
 	/* UCSI max payload means only getting at most 4 PDOs at a time */
 	ret = ucsi_get_pdos(con, 1, con->src_pdos, 0, UCSI_MAX_PDOS);
 	if (ret < 0)
-		return;
+		return ret;
 
 	con->num_pdos = ret / sizeof(u32); /* number of bytes to 32-bit PDOs */
 	if (con->num_pdos < UCSI_MAX_PDOS)
-		return;
+		return 0;
 
 	/* get the remaining PDOs, if any */
 	ret = ucsi_get_pdos(con, 1, con->src_pdos, UCSI_MAX_PDOS,
 			    PDO_MAX_OBJECTS - UCSI_MAX_PDOS);
 	if (ret < 0)
-		return;
+		return ret;
 
 	con->num_pdos += ret / sizeof(u32);
+
+	ucsi_port_psy_changed(con);
+
+	return 0;
 }
 
 static int ucsi_check_altmodes(struct ucsi_connector *con)
@@ -626,7 +630,7 @@ static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 	case UCSI_CONSTAT_PWR_OPMODE_PD:
 		con->rdo = con->status.request_data_obj;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
-		ucsi_get_src_pdos(con, 1);
+		ucsi_partner_task(con, ucsi_get_src_pdos, 30, 0);
 		ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
 		break;
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
@@ -844,12 +848,6 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 	role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
 
-	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
-	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE) {
-		ucsi_pwr_opmode_change(con);
-		ucsi_port_psy_changed(con);
-	}
-
 	if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
 		typec_set_pwr_role(con->port, role);
 
@@ -900,6 +898,10 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 				con->num, u_role);
 	}
 
+	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
+	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE)
+		ucsi_pwr_opmode_change(con);
+
 	if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE)
 		ucsi_partner_change(con);
 
@@ -1248,8 +1250,10 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 		ret = 0;
 	}
 
-	if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == UCSI_CONSTAT_PWR_OPMODE_PD)
+	if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == UCSI_CONSTAT_PWR_OPMODE_PD) {
+		ucsi_get_src_pdos(con);
 		ucsi_check_altmodes(con);
+	}
 
 	trace_ucsi_register_port(con->num, &con->status);
 
Signature · 1 line
2.32.0
author maintainer
#7 lore raw

RFC PATCH 7/7 usb: typec: ucsi: Better fix for missing unplug events issue

In reply to Heikki Krogerus

The commit 217504a05532 ("usb: typec: ucsi: Work around PPM losing change information") had solved this issue previously, but in a really complex manner. The core issue is that on some platforms the EC firmware does not interrupt the driver on unplug event in some cases, mainly when the cable is unplugged immediately after the plug-in.

From now on handling that problem by simply re-checking new connections.

---
 drivers/usb/typec/ucsi/ucsi.c | 194 ++++++++--------------------------
 drivers/usb/typec/ucsi/ucsi.h |   2 -
 2 files changed, 44 insertions(+), 152 deletions(-)
drivers/usb/typec/ucsi/ucsi.c +44 -150
index e7267e47c3e4d..505fc587a49a0 100644
@@ -700,9 +700,6 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 	enum usb_role u_role = USB_ROLE_NONE;
 	int ret;
 
-	if (!con->partner)
-		return;
-
 	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
 	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
@@ -719,10 +716,6 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 		break;
 	}
 
-	/* Complete pending data role swap */
-	if (!completion_done(&con->complete))
-		complete(&con->complete);
-
 	/* Only notify USB controller if partner supports USB data */
 	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
 		u_role = USB_ROLE_NONE;
@@ -733,118 +726,46 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 			con->num, u_role);
 }
 
+static int ucsi_check_connection(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->status, sizeof(con->status));
+	if (ret < 0)
+		dev_err(con->ucsi->dev, "GET_CONNECTOR_STATUS failed (%d)\n", ret);
+
+	if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
+		if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
+		    UCSI_CONSTAT_PWR_OPMODE_PD)
+			ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
+	} else {
+		ucsi_partner_change(con);
+		ucsi_port_psy_changed(con);
+		ucsi_unregister_partner(con);
+	}
+
+	return 0;
+}
+
 static void ucsi_handle_connector_change(struct work_struct *work)
 {
 	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
 						  work);
 	struct ucsi *ucsi = con->ucsi;
-	struct ucsi_connector_status pre_ack_status;
-	struct ucsi_connector_status post_ack_status;
 	enum typec_role role;
-	enum usb_role u_role = USB_ROLE_NONE;
-	u16 inferred_changes;
-	u16 changed_flags;
 	u64 command;
 	int ret;
 
 	mutex_lock(&con->lock);
 
-	/*
-	 * Some/many PPMs have an issue where all fields in the change bitfield
-	 * are cleared when an ACK is send. This will causes any change
-	 * between GET_CONNECTOR_STATUS and ACK to be lost.
-	 *
-	 * We work around this by re-fetching the connector status afterwards.
-	 * We then infer any changes that we see have happened but that may not
-	 * be represented in the change bitfield.
-	 *
-	 * Also, even though we don't need to know the currently supported alt
-	 * modes, we run the GET_CAM_SUPPORTED command to ensure the PPM does
-	 * not get stuck in case it assumes we do.
-	 * Always do this, rather than relying on UCSI_CONSTAT_CAM_CHANGE to be
-	 * set in the change bitfield.
-	 *
-	 * We end up with the following actions:
-	 *  1. UCSI_GET_CONNECTOR_STATUS, store result, update unprocessed_changes
-	 *  2. UCSI_GET_CAM_SUPPORTED, discard result
-	 *  3. ACK connector change
-	 *  4. UCSI_GET_CONNECTOR_STATUS, store result
-	 *  5. Infere lost changes by comparing UCSI_GET_CONNECTOR_STATUS results
-	 *  6. If PPM reported a new change, then restart in order to ACK
-	 *  7. Process everything as usual.
-	 *
-	 * We may end up seeing a change twice, but we can only miss extremely
-	 * short transitional changes.
-	 */
-
-	/* 1. First UCSI_GET_CONNECTOR_STATUS */
-	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
-	ret = ucsi_send_command(ucsi, command, &pre_ack_status,
-				sizeof(pre_ack_status));
-	if (ret < 0) {
-		dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
-			__func__, ret);
-		goto out_unlock;
-	}
-	con->unprocessed_changes |= pre_ack_status.change;
-
-	/* 2. Run UCSI_GET_CAM_SUPPORTED and discard the result. */
-	command = UCSI_GET_CAM_SUPPORTED;
-	command |= UCSI_CONNECTOR_NUMBER(con->num);
-	ucsi_send_command(con->ucsi, command, NULL, 0);
-
-	/* 3. ACK connector change */
-	ret = ucsi_acknowledge_connector_change(ucsi);
-	clear_bit(EVENT_PENDING, &ucsi->flags);
-	if (ret) {
-		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
-		goto out_unlock;
-	}
-
-	/* 4. Second UCSI_GET_CONNECTOR_STATUS */
 	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
-	ret = ucsi_send_command(ucsi, command, &post_ack_status,
-				sizeof(post_ack_status));
-	if (ret < 0) {
-		dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
-			__func__, ret);
-		goto out_unlock;
-	}
-
-	/* 5. Inferre any missing changes */
-	changed_flags = pre_ack_status.flags ^ post_ack_status.flags;
-	inferred_changes = 0;
-	if (UCSI_CONSTAT_PWR_OPMODE(changed_flags) != 0)
-		inferred_changes |= UCSI_CONSTAT_POWER_OPMODE_CHANGE;
-
-	if (changed_flags & UCSI_CONSTAT_CONNECTED)
-		inferred_changes |= UCSI_CONSTAT_CONNECT_CHANGE;
-
-	if (changed_flags & UCSI_CONSTAT_PWR_DIR)
-		inferred_changes |= UCSI_CONSTAT_POWER_DIR_CHANGE;
-
-	if (UCSI_CONSTAT_PARTNER_FLAGS(changed_flags) != 0)
-		inferred_changes |= UCSI_CONSTAT_PARTNER_CHANGE;
-
-	if (UCSI_CONSTAT_PARTNER_TYPE(changed_flags) != 0)
-		inferred_changes |= UCSI_CONSTAT_PARTNER_CHANGE;
-
-	/* Mask out anything that was correctly notified in the later call. */
-	inferred_changes &= ~post_ack_status.change;
-	if (inferred_changes)
-		dev_dbg(ucsi->dev, "%s: Inferred changes that would have been lost: 0x%04x\n",
-			__func__, inferred_changes);
-
-	con->unprocessed_changes |= inferred_changes;
-
-	/* 6. If PPM reported a new change, then restart in order to ACK */
-	if (post_ack_status.change)
-		goto out_unlock;
+	ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status));
+	if (ret < 0)
+		dev_err(ucsi->dev, "GET_CONNECTOR_STATUS failed (%d)\n", ret);
 
-	/* 7. Continue as if nothing happened */
-	con->status = post_ack_status;
-	con->status.change = con->unprocessed_changes;
-	con->unprocessed_changes = 0;
+	trace_ucsi_connector_change(con->num, &con->status);
 
 	role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
 
@@ -858,63 +779,38 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 	if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
 		typec_set_pwr_role(con->port, role);
-
-		switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
-		case UCSI_CONSTAT_PARTNER_TYPE_UFP:
-		case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
-			u_role = USB_ROLE_HOST;
-			fallthrough;
-		case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
-			typec_set_data_role(con->port, TYPEC_HOST);
-			break;
-		case UCSI_CONSTAT_PARTNER_TYPE_DFP:
-			u_role = USB_ROLE_DEVICE;
-			typec_set_data_role(con->port, TYPEC_DEVICE);
-			break;
-		default:
-			break;
-		}
+		ucsi_port_psy_changed(con);
+		ucsi_partner_change(con);
 
 		if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
 			ucsi_register_partner(con);
-
-			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
-			    UCSI_CONSTAT_PWR_OPMODE_PD)
-				ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
+			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
 		} else {
 			ucsi_unregister_partner(con);
 		}
-
-		ucsi_port_psy_changed(con);
-
-		/* Only notify USB controller if partner supports USB data */
-		if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
-				UCSI_CONSTAT_PARTNER_FLAG_USB))
-			u_role = USB_ROLE_NONE;
-
-		ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
-		if (ret)
-			dev_err(ucsi->dev, "con:%d: failed to set usb role:%d\n",
-				con->num, u_role);
 	}
 
 	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
 	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE)
 		ucsi_pwr_opmode_change(con);
 
-	if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE)
+	if (con->partner && con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) {
 		ucsi_partner_change(con);
 
-	trace_ucsi_connector_change(con->num, &con->status);
-
-out_unlock:
-	if (test_and_clear_bit(EVENT_PENDING, &ucsi->flags)) {
-		schedule_work(&con->work);
-		mutex_unlock(&con->lock);
-		return;
+		/* Complete pending data role swap */
+		if (!completion_done(&con->complete))
+			complete(&con->complete);
 	}
 
-	clear_bit(EVENT_PROCESSING, &ucsi->flags);
+	if (con->status.change & UCSI_CONSTAT_CAM_CHANGE)
+		ucsi_partner_task(con, ucsi_check_altmodes, 1, 0);
+
+	clear_bit(EVENT_PENDING, &con->ucsi->flags);
+
+	ret = ucsi_acknowledge_connector_change(ucsi);
+	if (ret)
+		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
+
 	mutex_unlock(&con->lock);
 }
 
@@ -932,9 +828,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num)
 		return;
 	}
 
-	set_bit(EVENT_PENDING, &ucsi->flags);
-
-	if (!test_and_set_bit(EVENT_PROCESSING, &ucsi->flags))
+	if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
 		schedule_work(&con->work);
 }
 EXPORT_SYMBOL_GPL(ucsi_connector_change);
drivers/usb/typec/ucsi/ucsi.h +0 -2
index d10b8c24435af..280f1e1bda2c9 100644
@@ -300,7 +300,6 @@ struct ucsi {
 #define EVENT_PENDING	0
 #define COMMAND_PENDING	1
 #define ACK_PENDING	2
-#define EVENT_PROCESSING	3
 };
 
 #define UCSI_MAX_SVID		5
@@ -327,7 +326,6 @@ struct ucsi_connector {
 
 	struct typec_capability typec_cap;
 
-	u16 unprocessed_changes;
 	struct ucsi_connector_status status;
 	struct ucsi_connector_capability cap;
 	struct power_supply *psy;
Signature · 1 line
2.32.0