xfs: dax: facilitate EXPERIMENTAL warning for dax=inode case
PATCH 1/1 xfs: dax: facilitate EXPERIMENTAL warning for dax=inode case
When dax-mode was tri-stated by adding dax=inode case, the EXPERIMENTAL warning on mount was missed for the case. Add logic to handle the warning similar to that of the 'dax=always' case.
--- fs/xfs/xfs_mount.h | 2 ++ fs/xfs/xfs_super.c | 8 +++++--- 2 files changed, 7 insertions(+), 3 deletions(-)
fs/xfs/xfs_mount.h +2 -0
@@ -277,6 +277,7 @@ typedef struct xfs_mount {#define XFS_FEAT_NEEDSREPAIR (1ULL << 25)/* needs xfs_repair */ /* Mount features */ +#define XFS_FEAT_DAX_INODE (1ULL << 47)/* DAX enabled */ #define XFS_FEAT_NOATTR2 (1ULL << 48)/* disable attr2 creation */ #define XFS_FEAT_NOALIGN (1ULL << 49)/* ignore alignment */ #define XFS_FEAT_ALLOCSIZE (1ULL << 50)/* user specified allocation size */
@@ -359,6 +360,7 @@ __XFS_HAS_FEAT(swalloc, SWALLOC) __XFS_HAS_FEAT(filestreams, FILESTREAMS) __XFS_HAS_FEAT(dax_always, DAX_ALWAYS) __XFS_HAS_FEAT(dax_never, DAX_NEVER) +__XFS_HAS_FEAT(dax_inode, DAX_INODE) __XFS_HAS_FEAT(norecovery, NORECOVERY)__XFS_HAS_FEAT (nouuid,NOUUID )
fs/xfs/xfs_super.c +5 -3
@@ -84,15 +84,16 @@ xfs_mount_set_dax_mode( {switch (mode) {case XFS_DAX_INODE : + mp->m_features |=XFS_FEAT_DAX_INODE ; mp->m_features &= ~(XFS_FEAT_DAX_ALWAYS |XFS_FEAT_DAX_NEVER );break ;case XFS_DAX_ALWAYS : mp->m_features |=XFS_FEAT_DAX_ALWAYS ; - mp->m_features &= ~XFS_FEAT_DAX_NEVER ; + mp->m_features &= ~(XFS_FEAT_DAX_NEVER |XFS_FEAT_DAX_INODE );break ;case XFS_DAX_NEVER : mp->m_features |=XFS_FEAT_DAX_NEVER ; - mp->m_features &= ~XFS_FEAT_DAX_ALWAYS ; + mp->m_features &= ~(XFS_FEAT_DAX_ALWAYS |XFS_FEAT_DAX_INODE );break ; } }
@@ -189,6 +190,7 @@ xfs_fs_show_options( { XFS_FEAT_LARGE_IOSIZE, ",largeio" }, { XFS_FEAT_DAX_ALWAYS, ",dax=always" }, { XFS_FEAT_DAX_NEVER, ",dax=never" }, + { XFS_FEAT_DAX_INODE, ",dax=inode" }, { 0, NULL } };struct xfs_mount *mp =XFS_M (root->d_sb);
@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {bool rtdev_is_dax = false, datadev_is_dax; xfs_warn(mp,
Signature · 1 line
2.31.1
Quoted 62 lines · Bill O'Donnell
When dax-mode was tri-stated by adding dax=inode case, the EXPERIMENTAL warning on mount was missed for the case. Add logic to handle the warning similar to that of the 'dax=always' case.
Signed-off-by Bill O'Donnell <[email protected]>--- fs/xfs/xfs_mount.h | 2 ++ fs/xfs/xfs_super.c | 8 +++++--- 2 files changed, 7 insertions(+), 3 deletions(-)fs/xfs/xfs_mount.h +2
-0@@ -277,6 +277,7 @@ typedef struct xfs_mount {#define XFS_FEAT_NEEDSREPAIR (1ULL << 25)/* needs xfs_repair */ /* Mount features */ +#define XFS_FEAT_DAX_INODE (1ULL << 47)/* DAX enabled */ #define XFS_FEAT_NOATTR2 (1ULL << 48)/* disable attr2 creation */ #define XFS_FEAT_NOALIGN (1ULL << 49)/* ignore alignment */ #define XFS_FEAT_ALLOCSIZE (1ULL << 50)/* user specified allocation size */ @@ -359,6 +360,7 @@ __XFS_HAS_FEAT(swalloc, SWALLOC) __XFS_HAS_FEAT(filestreams, FILESTREAMS) __XFS_HAS_FEAT(dax_always, DAX_ALWAYS) __XFS_HAS_FEAT(dax_never, DAX_NEVER) +__XFS_HAS_FEAT(dax_inode, DAX_INODE) __XFS_HAS_FEAT(norecovery, NORECOVERY)__XFS_HAS_FEAT (nouuid,NOUUID )fs/xfs/xfs_super.c +4
-2@@ -84,15 +84,16 @@ xfs_mount_set_dax_mode( {switch (mode) {case XFS_DAX_INODE : + mp->m_features |=XFS_FEAT_DAX_INODE ; mp->m_features &= ~(XFS_FEAT_DAX_ALWAYS |XFS_FEAT_DAX_NEVER );break ;case XFS_DAX_ALWAYS : mp->m_features |=XFS_FEAT_DAX_ALWAYS ; - mp->m_features &= ~XFS_FEAT_DAX_NEVER ; + mp->m_features &= ~(XFS_FEAT_DAX_NEVER |XFS_FEAT_DAX_INODE );break ;case XFS_DAX_NEVER : mp->m_features |=XFS_FEAT_DAX_NEVER ; - mp->m_features &= ~XFS_FEAT_DAX_ALWAYS ; + mp->m_features &= ~(XFS_FEAT_DAX_ALWAYS |XFS_FEAT_DAX_INODE );break ; } }@@ -189,6 +190,7 @@ xfs_fs_show_options( { XFS_FEAT_LARGE_IOSIZE, ",largeio" }, { XFS_FEAT_DAX_ALWAYS, ",dax=always" }, { XFS_FEAT_DAX_NEVER, ",dax=never" }, + { XFS_FEAT_DAX_INODE, ",dax=inode" }, { 0, NULL } };struct xfs_mount *mp =XFS_M (root->d_sb);
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1589
Quoted 5 lines
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {
Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) &&
!xfs_has_dax_never(mp))) {
...
xfs_warn(mp, "DAX IS EXPERIMENTAL");
}--D
Quoted 6 lines
fs/xfs/xfs_super.c +0
-0bool rtdev_is_dax = false, datadev_is_dax; xfs_warn(mp,Signature · 1 line
2.31.1
Quoted 71 lines · Darrick J. Wong
Quoted 62 lines · Bill O'Donnell
When dax-mode was tri-stated by adding dax=inode case, the EXPERIMENTAL warning on mount was missed for the case. Add logic to handle the warning similar to that of the 'dax=always' case.
Signed-off-by Bill O'Donnell <[email protected]>--- fs/xfs/xfs_mount.h | 2 ++ fs/xfs/xfs_super.c | 8 +++++--- 2 files changed, 7 insertions(+), 3 deletions(-)fs/xfs/xfs_mount.h +2
-0@@ -277,6 +277,7 @@ typedef struct xfs_mount {#define XFS_FEAT_NEEDSREPAIR (1ULL << 25)/* needs xfs_repair */ /* Mount features */ +#define XFS_FEAT_DAX_INODE (1ULL << 47)/* DAX enabled */ #define XFS_FEAT_NOATTR2 (1ULL << 48)/* disable attr2 creation */ #define XFS_FEAT_NOALIGN (1ULL << 49)/* ignore alignment */ #define XFS_FEAT_ALLOCSIZE (1ULL << 50)/* user specified allocation size */ @@ -359,6 +360,7 @@ __XFS_HAS_FEAT(swalloc, SWALLOC) __XFS_HAS_FEAT(filestreams, FILESTREAMS) __XFS_HAS_FEAT(dax_always, DAX_ALWAYS) __XFS_HAS_FEAT(dax_never, DAX_NEVER) +__XFS_HAS_FEAT(dax_inode, DAX_INODE) __XFS_HAS_FEAT(norecovery, NORECOVERY)__XFS_HAS_FEAT (nouuid,NOUUID )fs/xfs/xfs_super.c +4
-2@@ -84,15 +84,16 @@ xfs_mount_set_dax_mode( {switch (mode) {case XFS_DAX_INODE : + mp->m_features |=XFS_FEAT_DAX_INODE ; mp->m_features &= ~(XFS_FEAT_DAX_ALWAYS |XFS_FEAT_DAX_NEVER );break ;case XFS_DAX_ALWAYS : mp->m_features |=XFS_FEAT_DAX_ALWAYS ; - mp->m_features &= ~XFS_FEAT_DAX_NEVER ; + mp->m_features &= ~(XFS_FEAT_DAX_NEVER |XFS_FEAT_DAX_INODE );break ;case XFS_DAX_NEVER : mp->m_features |=XFS_FEAT_DAX_NEVER ; - mp->m_features &= ~XFS_FEAT_DAX_ALWAYS ; + mp->m_features &= ~(XFS_FEAT_DAX_ALWAYS |XFS_FEAT_DAX_INODE );break ; } }@@ -189,6 +190,7 @@ xfs_fs_show_options( { XFS_FEAT_LARGE_IOSIZE, ",largeio" }, { XFS_FEAT_DAX_ALWAYS, ",dax=always" }, { XFS_FEAT_DAX_NEVER, ",dax=never" }, + { XFS_FEAT_DAX_INODE, ",dax=inode" }, { 0, NULL } };struct xfs_mount *mp =XFS_M (root->d_sb);fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1589
Quoted 5 lines
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
Quoted 6 lines
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) &&
!xfs_has_dax_never(mp))) {
...
xfs_warn(mp, "DAX IS EXPERIMENTAL");
}Good idea. I'll send a v2.
Thanks-
Bill
Quoted 9 lines
--D
Quoted 6 lines
fs/xfs/xfs_super.c +0
-0bool rtdev_is_dax = false, datadev_is_dax; xfs_warn(mp,Signature · 1 line
2.31.1
Quoted 11 lines · Darrick J. Wong
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1589
Quoted 6 lines · Bill O'Donnell
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
Quoted 5 lines
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) &&
!xfs_has_dax_never(mp))) {
...
xfs_warn(mp, "DAX IS EXPERIMENTAL");
}changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
- if (xfs_has_dax_always(mp)) {
+ if (xfs_has_dax_always(mp) || $NEW_DAX_INODE_TEST) {
...
if (xfs_has_reflink(mp)) {
xfs_alert(mp,
"DAX and reflink cannot be used together!");
error = -EINVAL;
goto out_filestream_unmount;
}
}-Eric
Quoted 12 lines · Eric Sandeen
Quoted 10 lines · Darrick J. Wong
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
Quoted 8 lines
Quoted 5 lines
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-Bill
Quoted 15 lines
(quoted diff) +1
-2- if (xfs_has_dax_always(mp)) { + if (xfs_has_dax_always(mp) || $NEW_DAX_INODE_TEST) { if (xfs_has_reflink(mp)) { xfs_alert(mp, "DAX and reflink cannot be used together!"); error = -EINVAL; goto out_filestream_unmount; } } -Eric
Quoted 19 lines · Bill O'Donnell
Quoted 18 lines · Eric Sandeen
Quoted 15 lines · Darrick J. Wong
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }
Quoted 6 lines
Quoted 2 lines
changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-Bill
I think that both your proposed patch and Darrick's suggestion have this problem.
"mount -o dax=inode" makes your new xfs_has_dax_inode(mp) true, and in that conditional, if the filesystem has reflink enabled, mount fails:
# mkfs.xfs -f /dev/pmem0p1
meta-data=/dev/pmem0p1 isize=512 agcount=4, agsize=4194304 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=0 inobtcount=0
data = bsize=4096 blocks=16777216, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=8192, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0# mount -o dax=inode /dev/pmem0p1 /mnt/test
mount: wrong fs type, bad option, bad superblock on /dev/pmem0p1,
missing codepage or helper program, or other errorIn some cases useful info is found in syslog - try dmesg | tail or so.
# dmesg | tail -n 2 [ 192.691733] XFS (pmem0p1): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [ 192.700300] XFS (pmem0p1): DAX and reflink cannot be used together!
Quoted 48 lines · Eric Sandeen
Quoted 19 lines · Bill O'Donnell
Quoted 18 lines · Eric Sandeen
Quoted 15 lines · Darrick J. Wong
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }Quoted 6 lines
Quoted 2 lines
changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-BillI think that both your proposed patch and Darrick's suggestion have this problem.
"mount -o dax=inode" makes your new
xfs_has_dax_inode(mp)true, and in that conditional, if the filesystem has reflink enabled, mount fails:# mkfs.xfs -f /dev/pmem0p1 meta-data=/dev/pmem0p1 isize=512 agcount=4, agsize=4194304 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 bigtime=0 inobtcount=0 data = bsize=4096 blocks=16777216, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=8192, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0# mount -o dax=inode /dev/pmem0p1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/pmem0p1, missing codepage or helper program, or other error
Quoted 7 lines
In some cases useful info is found in syslog - try dmesg | tail or so.
# dmesg | tail -n 2 [ 192.691733] XFS (pmem0p1): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [ 192.700300] XFS (pmem0p1): DAX and reflink cannot be used together!
So, the "DAX enabled" is a misnomer in this case. However the incompatibility of DAX and reflink is reflected in the next message, and indeed the mount fails. Is it now a matter of fixing the message output so as not to indicate "DAX enabled..."?
Thanks-
Bill
Quoted 52 lines · Bill O'Donnell
Quoted 51 lines · Eric Sandeen
Quoted 19 lines · Bill O'Donnell
Quoted 18 lines · Eric Sandeen
Quoted 15 lines · Darrick J. Wong
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
fs/xfs/xfs_super.c +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super(if (xfs_has_crc (mp)) sb->s_flags |=SB_I_VERSION ; -if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }Quoted 6 lines
Quoted 2 lines
changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-BillI think that both your proposed patch and Darrick's suggestion have this problem.
"mount -o dax=inode" makes your new
xfs_has_dax_inode(mp)true, and in that conditional, if the filesystem has reflink enabled, mount fails:# mkfs.xfs -f /dev/pmem0p1 meta-data=/dev/pmem0p1 isize=512 agcount=4, agsize=4194304 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 bigtime=0 inobtcount=0 data = bsize=4096 blocks=16777216, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=8192, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0# mount -o dax=inode /dev/pmem0p1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/pmem0p1, missing codepage or helper program, or other errorIn some cases useful info is found in syslog - try dmesg | tail or so.
Quoted 8 lines
Quoted 4 lines
# dmesg | tail -n 2 [ 192.691733] XFS (pmem0p1): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [ 192.700300] XFS (pmem0p1): DAX and reflink cannot be used together!So, the "DAX enabled" is a misnomer in this case. However the incompatibility of DAX and reflink is reflected in the next message, and indeed the mount fails. Is it now a matter of fixing the message output so as not to indicate "DAX enabled..."?
The mount should not fail, and it does not fail prior to your change.
In the past, we did not allow any mixing of a reflink-capable filesystem with dax in any way. Now, with per-inode dax, dax-enabled inodes and reflink-enabled inodes can exist on the same filesystem, you just cannot have an inode which is both dax-enabled and reflinked at the same time.
-Eric
Quoted 62 lines · Eric Sandeen
Quoted 52 lines · Bill O'Donnell
Quoted 51 lines · Eric Sandeen
Quoted 19 lines · Bill O'Donnell
Quoted 18 lines · Eric Sandeen
Quoted 15 lines · Darrick J. Wong
Review xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
(quoted diff) +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super( if (xfs_has_crc(mp)) sb->s_flags |= SB_I_VERSION; - if (xfs_has_dax_always(mp)) { + if (xfs_has_dax_always(mp) || xfs_has_dax_inode(mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }Quoted 6 lines
Quoted 2 lines
changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-BillI think that both your proposed patch and Darrick's suggestion have this problem.
"mount -o dax=inode" makes your new
xfs_has_dax_inode(mp)true, and in that conditional, if the filesystem has reflink enabled, mount fails:# mkfs.xfs -f /dev/pmem0p1 meta-data=/dev/pmem0p1 isize=512 agcount=4, agsize=4194304 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 bigtime=0 inobtcount=0 data = bsize=4096 blocks=16777216, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=8192, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0# mount -o dax=inode /dev/pmem0p1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/pmem0p1, missing codepage or helper program, or other errorIn some cases useful info is found in syslog - try dmesg | tail or so.
Quoted 8 lines
Quoted 4 lines
# dmesg | tail -n 2 [ 192.691733] XFS (pmem0p1): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [ 192.700300] XFS (pmem0p1): DAX and reflink cannot be used together!So, the "DAX enabled" is a misnomer in this case. However the incompatibility of DAX and reflink is reflected in the next message, and indeed the mount fails. Is it now a matter of fixing the message output so as not to indicate "DAX enabled..."?
Quoted 6 lines
The mount should not fail, and it does not fail prior to your change.
In the past, we did not allow any mixing of a reflink-capable filesystem with dax in any way. Now, with per-inode dax, dax-enabled inodes and reflink-enabled inodes can exist on the same filesystem, you just cannot have an inode which is both dax-enabled and reflinked at the same time.
Ah. I missed that nuance. I had thought the incompatibility was absolute. :/
The manpage for mkfs.xfs may need updating for the inode mode (unless mine is old):
----------------snip------------------
"Note: the filesystem DAX mount option ( -o dax ) is incom‐
patible with reflink-enabled XFS filesystems. To use
filesystem DAX with XFS, specify the -m reflink=0 option to mkfs.xfs to disable the reflink feature."
-------------------------------------
Thanks-
Bill
Quoted 73 lines · Bill O'Donnell
Quoted 62 lines · Eric Sandeen
Quoted 52 lines · Bill O'Donnell
Quoted 51 lines · Eric Sandeen
Quoted 19 lines · Bill O'Donnell
Quoted 18 lines · Eric Sandeen
Quoted 15 lines · Darrick J. Wong
Review xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
(quoted diff) +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super( if (xfs_has_crc(mp)) sb->s_flags |= SB_I_VERSION; - if (xfs_has_dax_always(mp)) { + if (xfs_has_dax_always(mp) || xfs_has_dax_inode(mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }Quoted 6 lines
Quoted 2 lines
changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-BillI think that both your proposed patch and Darrick's suggestion have this problem.
"mount -o dax=inode" makes your new
xfs_has_dax_inode(mp)true, and in that conditional, if the filesystem has reflink enabled, mount fails:# mkfs.xfs -f /dev/pmem0p1 meta-data=/dev/pmem0p1 isize=512 agcount=4, agsize=4194304 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 bigtime=0 inobtcount=0 data = bsize=4096 blocks=16777216, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=8192, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0# mount -o dax=inode /dev/pmem0p1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/pmem0p1, missing codepage or helper program, or other errorIn some cases useful info is found in syslog - try dmesg | tail or so.
Quoted 8 lines
Quoted 4 lines
# dmesg | tail -n 2 [ 192.691733] XFS (pmem0p1): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [ 192.700300] XFS (pmem0p1): DAX and reflink cannot be used together!So, the "DAX enabled" is a misnomer in this case. However the incompatibility of DAX and reflink is reflected in the next message, and indeed the mount fails. Is it now a matter of fixing the message output so as not to indicate "DAX enabled..."?
Quoted 6 lines
The mount should not fail, and it does not fail prior to your change.
In the past, we did not allow any mixing of a reflink-capable filesystem with dax in any way. Now, with per-inode dax, dax-enabled inodes and reflink-enabled inodes can exist on the same filesystem, you just cannot have an inode which is both dax-enabled and reflinked at the same time.
Ah. I missed that nuance. I had thought the incompatibility was absolute. :/
Quoted 8 lines
The manpage for mkfs.xfs may need updating for the inode mode (unless mine is old):
----------------snip------------------
"Note: the filesystem DAX mount option ( -o dax ) is incom‐
patible with reflink-enabled XFS filesystems. To use
filesystem DAX with XFS, specify the -m reflink=0 option to mkfs.xfs to disable the reflink feature."
-------------------------------------
Hm, looks like the xfs(5) manpage got updated, but it seems mkfs.xfs(8) did not.
dax=value
Set CPU direct access (DAX) behavior for the current filesystem. This mount option accepts the following values:
"dax=inode" DAX will be enabled only on regular files with FS_XFLAG_DAX applied.
"dax=never" DAX will not be enabled for any files. FS_XFLAG_DAX will be ignored.
"dax=always" DAX will be enabled for all regular files, regardless of the FS_XFLAG_DAX state.
If no option is used when mounting a filesystem stored on a DAX capable device, dax=inode will be used as default.
For details regarding DAX behavior in kernel, please refer to ker‐ nel's documentation
I'll send a patch to fix up the mkfs manpage, thanks.
Thanks,
-Eric
Quoted 92 lines · Eric Sandeen
Quoted 73 lines · Bill O'Donnell
Quoted 62 lines · Eric Sandeen
Quoted 52 lines · Bill O'Donnell
Quoted 51 lines · Eric Sandeen
Quoted 19 lines · Bill O'Donnell
Quoted 18 lines · Eric Sandeen
Quoted 15 lines · Darrick J. Wong
Review xfs_fs_fill_super( · line 1588
Quoted 5 lines · Bill O'Donnell
(quoted diff) +1
-1@@ -1584,7 +1586,7 @@ xfs_fs_fill_super( if (xfs_has_crc(mp)) sb->s_flags |= SB_I_VERSION; - if (xfs_has_dax_always(mp)) { + if (xfs_has_dax_always(mp) || xfs_has_dax_inode(mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }Quoted 6 lines
Quoted 2 lines
changing this conditional in this way will also fail dax=inode mounts on reflink-capable (i.e. default) filesystems, no?
Correct. My original patch tests fine, and still handles the reflink and dax incompatibility. The new suggested logic is problematic.
-BillI think that both your proposed patch and Darrick's suggestion have this problem.
"mount -o dax=inode" makes your new
xfs_has_dax_inode(mp)true, and in that conditional, if the filesystem has reflink enabled, mount fails:# mkfs.xfs -f /dev/pmem0p1 meta-data=/dev/pmem0p1 isize=512 agcount=4, agsize=4194304 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 bigtime=0 inobtcount=0 data = bsize=4096 blocks=16777216, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=8192, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0# mount -o dax=inode /dev/pmem0p1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/pmem0p1, missing codepage or helper program, or other errorIn some cases useful info is found in syslog - try dmesg | tail or so.
Quoted 8 lines
Quoted 4 lines
# dmesg | tail -n 2 [ 192.691733] XFS (pmem0p1): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [ 192.700300] XFS (pmem0p1): DAX and reflink cannot be used together!So, the "DAX enabled" is a misnomer in this case. However the incompatibility of DAX and reflink is reflected in the next message, and indeed the mount fails. Is it now a matter of fixing the message output so as not to indicate "DAX enabled..."?
Quoted 6 lines
The mount should not fail, and it does not fail prior to your change.
In the past, we did not allow any mixing of a reflink-capable filesystem with dax in any way. Now, with per-inode dax, dax-enabled inodes and reflink-enabled inodes can exist on the same filesystem, you just cannot have an inode which is both dax-enabled and reflinked at the same time.
Ah. I missed that nuance. I had thought the incompatibility was absolute. :/
Quoted 8 lines
The manpage for mkfs.xfs may need updating for the inode mode (unless mine is old):
----------------snip------------------
"Note: the filesystem DAX mount option ( -o dax ) is incom‐
patible with reflink-enabled XFS filesystems. To use
filesystem DAX with XFS, specify the -m reflink=0 option to mkfs.xfs to disable the reflink feature."
-------------------------------------Hm, looks like the xfs(5) manpage got updated, but it seems
mkfs.xfs(8)did not.dax=value
Set CPU direct access (DAX) behavior for the current filesystem. This mount option accepts the following values:"dax=inode" DAX will be enabled only on regular files with
FS_XFLAG_DAXapplied.
Quoted 8 lines
"dax=never" DAX will not be enabled for any files.
FS_XFLAG_DAXwill be ignored."dax=always" DAX will be enabled for all regular files, regardless of the
FS_XFLAG_DAXstate.If no option is used when mounting a filesystem stored on a DAX capable device, dax=inode will be used as default.
The documentation here, https://www.kernel.org/doc/Documentation/filesystems/dax.txt
adds to the confusion.
"-o dax" is a legacy option which is an alias for "dax=always".
This may be removed in the future so "-o dax=always" is the preferred method for specifying this behavior.
Quoted 9 lines
For details regarding DAX behavior in kernel, please refer to ker‐ nel's documentation
I'll send a patch to fix up the mkfs manpage, thanks.
Thanks,
-Eric
Quoted 10 lines · Darrick J. Wong
Quoted 9 lines · Bill O'Donnell
When dax-mode was tri-stated by adding dax=inode case, the EXPERIMENTAL warning on mount was missed for the case. Add logic to handle the warning similar to that of the 'dax=always' case.
Signed-off-by Bill O'Donnell <[email protected]>--- fs/xfs/xfs_mount.h | 2 ++ fs/xfs/xfs_super.c | 8 +++++--- 2 files changed, 7 insertions(+), 3 deletions(-)
...
Quoted 10 lines
fs/xfs/xfs_super.c xfs_fs_fill_super( · line 1589
Quoted 2 lines
fs/xfs/xfs_super.c +1
-1-if (xfs_has_dax_always (mp)) { +if (xfs_has_dax_always (mp) ||xfs_has_dax_inode (mp)) {Er... can't this be done without burning another feature bit by:
if (xfs_has_dax_always(mp) || (!xfs_has_dax_always(mp) && !xfs_has_dax_never(mp))) { ... xfs_warn(mp, "DAX IS EXPERIMENTAL"); }
Not quite. This will be true at initialization.
-Bill