phy: marvell: phy-mvebu-cp110-comphy: Rename HS-SGMMI to 2500Base-X
PATCH 1/3 phy: marvell: phy-mvebu-cp110-comphy: Rename HS-SGMMI to 2500Base-X
Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed.
Rename macro names and comments to 2500Base-X.
--- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/phy/marvell/phy-mvebu-cp110-comphy.c +8 -8
@@ -167,7 +167,7 @@#define COMPHY_FW_MODE_SATA 0x1#define COMPHY_FW_MODE_SGMII 0x2/* SGMII 1G */ -#define COMPHY_FW_MODE_HS_SGMII 0x3/* SGMII 2.5G */ +#define COMPHY_FW_MODE_2500BASEX 0x3/* 2500BASE-X */ #define COMPHY_FW_MODE_USB3H 0x4#define COMPHY_FW_MODE_USB3D 0x5#define COMPHY_FW_MODE_PCIE 0x6
@@ -207,7 +207,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {/* lane 0 */ GEN_CONF (0 ,0 ,PHY_MODE_PCIE ,COMPHY_FW_MODE_PCIE ),ETH_CONF (0 ,1 ,PHY_INTERFACE_MODE_SGMII ,0x1 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (0 ,1 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (0 ,1 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_2500BASEX ),GEN_CONF (0 ,1 ,PHY_MODE_SATA ,COMPHY_FW_MODE_SATA ),/* lane 1 */ GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
@@ -215,10 +215,10 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {GEN_CONF (1 ,0 ,PHY_MODE_SATA ,COMPHY_FW_MODE_SATA ),GEN_CONF (1 ,0 ,PHY_MODE_PCIE ,COMPHY_FW_MODE_PCIE ),ETH_CONF (1 ,2 ,PHY_INTERFACE_MODE_SGMII ,0x1 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (1 ,2 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (1 ,2 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_2500BASEX ),/* lane 2 */ ETH_CONF (2 ,0 ,PHY_INTERFACE_MODE_SGMII ,0x1 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (2 ,0 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (2 ,0 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_2500BASEX ),ETH_CONF (2 ,0 ,PHY_INTERFACE_MODE_RXAUI ,0x1 ,COMPHY_FW_MODE_RXAUI ),ETH_CONF (2 ,0 ,PHY_INTERFACE_MODE_10GBASER ,0x1 ,COMPHY_FW_MODE_XFI ), GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
@@ -227,26 +227,26 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {/* lane 3 */ GEN_CONF (3 ,0 ,PHY_MODE_PCIE ,COMPHY_FW_MODE_PCIE ),ETH_CONF (3 ,1 ,PHY_INTERFACE_MODE_SGMII ,0x2 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (3 ,1 ,PHY_INTERFACE_MODE_2500BASEX ,0x2 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (3 ,1 ,PHY_INTERFACE_MODE_2500BASEX ,0x2 ,COMPHY_FW_MODE_2500BASEX ),ETH_CONF (3 ,1 ,PHY_INTERFACE_MODE_RXAUI ,0x1 ,COMPHY_FW_MODE_RXAUI ),GEN_CONF (3 ,1 ,PHY_MODE_USB_HOST_SS ,COMPHY_FW_MODE_USB3H ),GEN_CONF (3 ,1 ,PHY_MODE_SATA ,COMPHY_FW_MODE_SATA ),/* lane 4 */ ETH_CONF (4 ,0 ,PHY_INTERFACE_MODE_SGMII ,0x2 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (4 ,0 ,PHY_INTERFACE_MODE_2500BASEX ,0x2 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (4 ,0 ,PHY_INTERFACE_MODE_2500BASEX ,0x2 ,COMPHY_FW_MODE_2500BASEX ),ETH_CONF (4 ,0 ,PHY_INTERFACE_MODE_10GBASER ,0x2 ,COMPHY_FW_MODE_XFI ),ETH_CONF (4 ,0 ,PHY_INTERFACE_MODE_RXAUI ,0x2 ,COMPHY_FW_MODE_RXAUI ),GEN_CONF (4 ,0 ,PHY_MODE_USB_DEVICE_SS ,COMPHY_FW_MODE_USB3D ),GEN_CONF (4 ,1 ,PHY_MODE_USB_HOST_SS ,COMPHY_FW_MODE_USB3H ),GEN_CONF (4 ,1 ,PHY_MODE_PCIE ,COMPHY_FW_MODE_PCIE ),ETH_CONF (4 ,1 ,PHY_INTERFACE_MODE_SGMII ,0x1 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (4 ,1 ,PHY_INTERFACE_MODE_2500BASEX ,-1 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (4 ,1 ,PHY_INTERFACE_MODE_2500BASEX ,-1 ,COMPHY_FW_MODE_2500BASEX ),ETH_CONF (4 ,1 ,PHY_INTERFACE_MODE_10GBASER ,-1 ,COMPHY_FW_MODE_XFI ),/* lane 5 */ ETH_CONF (5 ,1 ,PHY_INTERFACE_MODE_RXAUI ,0x2 ,COMPHY_FW_MODE_RXAUI ),GEN_CONF (5 ,1 ,PHY_MODE_SATA ,COMPHY_FW_MODE_SATA ),ETH_CONF (5 ,2 ,PHY_INTERFACE_MODE_SGMII ,0x1 ,COMPHY_FW_MODE_SGMII ), -ETH_CONF (5 ,2 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_HS_SGMII ), +ETH_CONF (5 ,2 ,PHY_INTERFACE_MODE_2500BASEX ,0x1 ,COMPHY_FW_MODE_2500BASEX ), GEN_CONF(5, 2, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE), };
Signature · 7 lines
2.20.1 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH 2/3 phy: marvell: phy-mvebu-a3700-comphy: Rename HS-SGMMI to 2500Base-X
Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed.
Rename macro names and comments to 2500Base-X.
--- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/phy/marvell/phy-mvebu-a3700-comphy.c +5 -5
@@ -29,7 +29,7 @@#define COMPHY_FW_MODE_SATA 0x1#define COMPHY_FW_MODE_SGMII 0x2 -#define COMPHY_FW_MODE_HS_SGMII 0x3 +#define COMPHY_FW_MODE_2500BASEX 0x3#define COMPHY_FW_MODE_USB3H 0x4#define COMPHY_FW_MODE_USB3D 0x5#define COMPHY_FW_MODE_PCIE 0x6
@@ -40,7 +40,7 @@#define COMPHY_FW_SPEED_1_25G 0/* SGMII 1G */ #define COMPHY_FW_SPEED_2_5G 1 -#define COMPHY_FW_SPEED_3_125G 2/* SGMII 2.5G */ +#define COMPHY_FW_SPEED_3_125G 2/* 2500BASE-X */ #define COMPHY_FW_SPEED_5G 3#define COMPHY_FW_SPEED_5_15625G 4/* XFI 5G */ #define COMPHY_FW_SPEED_6G 5
@@ -84,14 +84,14 @@ static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {MVEBU_A3700_COMPHY_CONF_ETH (0 ,PHY_INTERFACE_MODE_SGMII ,1 ,COMPHY_FW_MODE_SGMII ),MVEBU_A3700_COMPHY_CONF_ETH (0 ,PHY_INTERFACE_MODE_2500BASEX ,1 , -COMPHY_FW_MODE_HS_SGMII ), +COMPHY_FW_MODE_2500BASEX ),/* lane 1 */ MVEBU_A3700_COMPHY_CONF_GEN (1 ,PHY_MODE_PCIE ,0 ,COMPHY_FW_MODE_PCIE ),MVEBU_A3700_COMPHY_CONF_ETH (1 ,PHY_INTERFACE_MODE_SGMII ,0 ,COMPHY_FW_MODE_SGMII ),MVEBU_A3700_COMPHY_CONF_ETH (1 ,PHY_INTERFACE_MODE_2500BASEX ,0 , -COMPHY_FW_MODE_HS_SGMII ), +COMPHY_FW_MODE_2500BASEX ),/* lane 2 */ MVEBU_A3700_COMPHY_CONF_GEN (2 ,PHY_MODE_SATA ,0 , COMPHY_FW_MODE_SATA),
@@ -205,7 +205,7 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy) COMPHY_FW_SPEED_1_25G);break ;case PHY_INTERFACE_MODE_2500BASEX : -dev_dbg (lane->dev,"set lane %d to HS SGMII mode\n" , +dev_dbg (lane->dev,"set lane %d to 2500BASEX mode\n" , lane->id); fw_param =COMPHY_FW_NET (fw_mode, lane->port,COMPHY_FW_SPEED_3_125G );
Signature · 7 lines
2.20.1 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH 3/3 phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes
In reply to Pali RohárArmada 3700 does not support RXAUI, XFI and neither SFI. Remove unused macros for these unsupported modes.
--- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/phy/marvell/phy-mvebu-a3700-comphy.c +0 -6
@@ -33,18 +33,12 @@#define COMPHY_FW_MODE_USB3H 0x4#define COMPHY_FW_MODE_USB3D 0x5#define COMPHY_FW_MODE_PCIE 0x6 -#define COMPHY_FW_MODE_RXAUI 0x7 -#define COMPHY_FW_MODE_XFI 0x8 -#define COMPHY_FW_MODE_SFI 0x9#define COMPHY_FW_MODE_USB3 0xa#define COMPHY_FW_SPEED_1_25G 0/* SGMII 1G */ #define COMPHY_FW_SPEED_2_5G 1#define COMPHY_FW_SPEED_3_125G 2/* 2500BASE-X */ #define COMPHY_FW_SPEED_5G 3 -#define COMPHY_FW_SPEED_5_15625G 4/* XFI 5G */ -#define COMPHY_FW_SPEED_6G 5 -#define COMPHY_FW_SPEED_10_3125G 6/* XFI 10G */ #define COMPHY_FW_SPEED_MAX 0x3F#define COMPHY_FW_MODE (mode) ((mode) << 12)
Signature · 7 lines
2.20.1 -- linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Re: [PATCH 3/3] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes
Quoted 5 lines · On Fri, 27 Aug 2021 11:27:53 +0200 Pali Rohár <[email protected]> wrote:
Armada 3700 does not support RXAUI, XFI and neither SFI. Remove unused macros for these unsupported modes.
Signed-off-by Pali Rohár <[email protected]>Fixes 9695375a3f4a ("phy: add A3700 COMPHY support")
BTW I was thinking about merging some parts of these 2 drivers into common code. Not entirely sure if I should follow, though.
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Re: [PATCH 3/3] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes
Quoted 11 lines · On Friday 27 August 2021 13:27:13 Marek Behún wrote:
Quoted 5 lines · On Fri, 27 Aug 2021 11:27:53 +0200 Pali Rohár <[email protected]> wrote:
Armada 3700 does not support RXAUI, XFI and neither SFI. Remove unused macros for these unsupported modes.
Signed-off-by Pali Rohár <[email protected]>Fixes 9695375a3f4a ("phy: add A3700 COMPHY support")BTW I was thinking about merging some parts of these 2 drivers into common code. Not entirely sure if I should follow, though.
cp110-comphy and a3700-comphy are just RPC drivers which calls SMC and relay on firmware support which implements real work. And both uses same RPC / SMC API. So merging drivers into one is possible.
But I do not think that it is a good idea that Linux kernel depends on some external firmware which implements RPC API for configuring HW.
Rather kernel should implements its native drivers without dependency on external firmware.
We know from history that kernel tried to avoid using x86 BIOS/firmware due to bugs and all functionality (re)-implemented itself without using firmware RPC functionality.
Kernel has already "hacks" in other drivers which are using these comphy drivers, just because older versions of firmware do not support all necessary functionality and upgrading this firmware is not easy step (and sometimes even not possible; e.g. when is cryptographically signed).
Re: [PATCH 3/3] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes
Quoted 7 lines · Pali Rohár
cp110-comphy and a3700-comphy are just RPC drivers which calls SMC and relay on firmware support which implements real work. And both uses same RPC / SMC API. So merging drivers into one is possible.
But I do not think that it is a good idea that Linux kernel depends on some external firmware which implements RPC API for configuring HW.
Quoted 6 lines
Rather kernel should implements its native drivers without dependency on external firmware.
We know from history that kernel tried to avoid using x86 BIOS/firmware due to bugs and all functionality (re)-implemented itself without using firmware RPC functionality.
Not really an argument in this case. We're not talking about closed source firmware.
Quoted 5 lines
Kernel has already "hacks" in other drivers which are using these comphy drivers, just because older versions of firmware do not support all necessary functionality and upgrading this firmware is not easy step (and sometimes even not possible; e.g. when is cryptographically signed).
The kernel used to (and probably still does) contain code to configure the comphys. Having worked on trying to get the 10G lanes stable on Macchiatobin, I much prefer the existing solution where it's in the ATF firmware. I've rebuilt the firmware several times during the course of that.
The advantage is that fixing the setup of the COMPHY is done in one place, and it fixes it not only for the kernel, but also for u-boot and UEFI too. So rather than having to maintain three different places for a particular board, we can maintain the parameters in one place - in the ATF firmware.
The problem with the past has been that stuff gets accepted into the kernel without the "full system" view and without regard for "should this actually be done in the firmware". Then, when it's decided that it really should be done in the firmware, we end up needing to keep the old stuff in the kernel for compatibility with older firmware, which incidentally may not be up to date.
If we were to drop the comphy setup from firmware, then we will need a lot of additional properties in the kernel's DT and u-boot DT for the comphy to configure it appropriately. And ACPI. I don't think that scales very well, and is a recipe for things getting out of step.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Re: [PATCH 3/3] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes
Quoted 18 lines · On Friday 27 August 2021 19:33:55 Russell King (Oracle) wrote:
Quoted 7 lines · Pali Rohár
cp110-comphy and a3700-comphy are just RPC drivers which calls SMC and relay on firmware support which implements real work. And both uses same RPC / SMC API. So merging drivers into one is possible.
But I do not think that it is a good idea that Linux kernel depends on some external firmware which implements RPC API for configuring HW.
Quoted 6 lines
Rather kernel should implements its native drivers without dependency on external firmware.
We know from history that kernel tried to avoid using x86 BIOS/firmware due to bugs and all functionality (re)-implemented itself without using firmware RPC functionality.
Not really an argument in this case. We're not talking about closed source firmware.
Quoted 8 lines
Quoted 5 lines
Kernel has already "hacks" in other drivers which are using these comphy drivers, just because older versions of firmware do not support all necessary functionality and upgrading this firmware is not easy step (and sometimes even not possible; e.g. when is cryptographically signed).
The kernel used to (and probably still does) contain code to configure the comphys.
Kernel does not have code for A3700. Hence reason why there are hacks in other drivers, like libata/ahci or usb/xhci.
Quoted 4 lines
Having worked on trying to get the 10G lanes stable on Macchiatobin, I much prefer the existing solution where it's in the ATF firmware. I've rebuilt the firmware several times during the course of that.
In some cases rebuilt of firmware does not have to be possible (e.g. when it it signed).
Quoted 2 lines
The advantage is that fixing the setup of the COMPHY is done in one place, and it fixes it not only for the kernel, but also for u-boot
U-Boot for A3720 has its own implementation and does not use firmware implementation (yet). So currently the only consumer of firmware implementation is just Linux kernel.
Quoted 3 lines
and UEFI too. So rather than having to maintain three different places for a particular board, we can maintain the parameters in one place - in the ATF firmware.
Same argument can be used for any other driver which is implemented in both bootloader and kernel... But I understand also your argument.
Quoted 7 lines
The problem with the past has been that stuff gets accepted into the kernel without the "full system" view and without regard for "should this actually be done in the firmware". Then, when it's decided that it really should be done in the firmware, we end up needing to keep the old stuff in the kernel for compatibility with older firmware, which incidentally may not be up to date.
Quoted 5 lines
If we were to drop the comphy setup from firmware, then we will need a lot of additional properties in the kernel's DT and u-boot DT for the comphy to configure it appropriately. And ACPI. I don't think that scales very well, and is a recipe for things getting out of step.
I think that whatever is used (firmware code, kernel code, ...), DT should always contains full HW description with all nodes, and not only some "subset". DT should be independent of current driver / firmware implementation.
Re: [PATCH 3/3] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes
Quoted 4 lines · Pali Rohár
I think that whatever is used (firmware code, kernel code, ...), DT should always contains full HW description with all nodes, and not only some "subset". DT should be independent of current driver / firmware implementation.
A "full" description of the hardware settings for the comphy on Armada 8040 would be very big if we included every single setting. There are about a thousand settings - and that is likely an under-estimate. I know, I've a shell script that decodes around a thousand settings from the registers for a _single_ lane, and that's incomplete.
With many of the settings not very well documented in the manual, we would struggle to describe it sufficiently well to get it past the DT maintainers.
So, "full hardware description" is impractical. Sorry.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
This series was applied to netdev/net-next.git (refs/heads/master):
Hello:
This series was applied to netdev/net-next.git (refs/heads/master):
Quoted 10 lines · On Fri, 27 Aug 2021 11:27:51 +0200 you wrote:
Comphy phy mode
0x3is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed.Rename macro names and comments to 2500Base-X.
Signed-off-by Pali Rohár <[email protected]>Fixes eb6a1fcb53e2 ("phy: mvebu-cp110-comphy: Add SMC call support")Fixes c2afb2fef595 ("phy: mvebu-cp110-comphy: Rename the macro handling only Ethernet modes")[...]
Here is the summary with links:
- [1/3] phy: marvell: phy-mvebu-cp110-comphy: Rename HS-SGMMI to 2500Base-X
https://git.kernel.org/netdev/net-next/c/3f141ad61745 - [2/3] phy: marvell: phy-mvebu-a3700-comphy: Rename HS-SGMMI to 2500Base-X https://git.kernel.org/netdev/net-next/c/b756bbec9cdd - [3/3] phy: marvell: phy-mvebu-a3700-comphy: Remove unsupported modes https://git.kernel.org/netdev/net-next/c/0c1f5f2a5581
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html