lib/igt_fb: Remove stride, offset restrictions on CCS FBs
cover lib/igt_fb: Remove stride, offset restrictions on CCS FBs
Remove the power-of-two stride and 2 MB surface offset restriction on ADL-P CCS FBs. Also fix/improve a few things in kms_ccs I noticed while testing. The last for-ci only patch makes the removal of restriction conditional on the required kernel FB remapping support.
Tested on SKL, TGL, ADL-P.
Imre Deak (6):
tests/kms_ccs: Make sure to free GEM and FB objects tests/kms_ccs: Use test pattern when possible tests/kms_ccs: Fix small aux stride subtest tests/kms_ccs: Test bad params for all CCS planes lib/igt_fb: Add support for remapping CCS FBs
for-ci: Check for ccs remap support
lib/igt_fb.c | 85 ++++++++++++++--- lib/intel_aux_pgtable.c | 66 ++++++++++++-- tests/kms_ccs.c | 197 ++++++++++++++++++++++++++-------------- 3 files changed, 257 insertions(+), 91 deletions(-)
Signature · 1 line
2.27.0
PATCH 1/6 tests/kms_ccs: Make sure to free GEM and FB objects
At the moment we're leaking the GEM and FB objects that could lead to OOM if multiple subtests are run (vs. each subtest in a seperate test run).
--- tests/kms_ccs.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
tests/kms_ccs.c +11 -4
@@ -345,6 +345,10 @@ static void generate_fb(data_t *data, struct igt_fb *fb,if (data->flags &TEST_FAIL_ON_ADDFB2 ) {igt_assert_eq (ret,-1 );igt_assert_eq (errno,EINVAL ); + +if (f.handles[index]) +gem_close (data->drm_fd, f.handles[index]); +return ; }else igt_assert_eq (ret,0 );
@@ -387,7 +391,8 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,drmModeModeInfo *drm_mode =igt_output_get_mode (data->output);int fb_width = drm_mode->hdisplay;enum igt_commit_style commit; -struct igt_fb fb, fb_sprite; +struct igt_fb fb = {}; +struct igt_fb fb_sprite = {};int ret;if (data->display.is_atomic)
@@ -425,7 +430,7 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags, }if (data->flags &TEST_FAIL_ON_ADDFB2 ) -return true; + goto out_free_fbs;igt_plane_set_position (primary,0 ,0 );igt_plane_set_size (primary, drm_mode->hdisplay, drm_mode->vdisplay);
@@ -458,14 +463,16 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,igt_plane_set_position (data->plane,0 ,0 );igt_plane_set_size (data->plane,0 ,0 );igt_plane_set_fb (data->plane,NULL ); -igt_remove_fb (display->drm_fd, &fb_sprite); }igt_plane_set_fb (primary,NULL );igt_plane_set_rotation (primary,IGT_ROTATION_0 );igt_display_commit2 (display, commit); -if (data->flags &TEST_CRC ) +out_free_fbs: +if (fb_sprite.fb_id) +igt_remove_fb (data->drm_fd, &fb_sprite); +if (fb.fb_id)igt_remove_fb (data->drm_fd, &fb);return true;
Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 1/6] tests/kms_ccs: Make sure to free GEM and FB objects
Quoted 14 lines · Imre Deak
At the moment we're leaking the GEM and FB objects that could lead to OOM if multiple subtests are run (vs. each subtest in a seperate test run).
Signed-off-by Imre Deak <[email protected]>--- tests/kms_ccs.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)tests/kms_ccs.c +0
-0
tests/kms_ccs.c static void generate_fb(data_t *data, struct igt_fb *fb, · line 351
Quoted 7 lines
tests/kms_ccs.c +4
-0@@ -345,6 +345,10 @@ static void generate_fb(data_t *data, struct igt_fb *fb,if (data->flags &TEST_FAIL_ON_ADDFB2 ) {igt_assert_eq (ret,-1 );igt_assert_eq (errno,EINVAL ); + +if (f.handles[index]) +gem_close (data->drm_fd, f.handles[index]); +
I guess this gem_close could be called before doing asserts.
Quoted 29 lines
tests/kms_ccs.c +3
-3return ; }else igt_assert_eq (ret,0 );@@ -387,7 +391,8 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,drmModeModeInfo *drm_mode =igt_output_get_mode (data->output);int fb_width = drm_mode->hdisplay;enum igt_commit_style commit; -struct igt_fb fb, fb_sprite; +struct igt_fb fb = {}; +struct igt_fb fb_sprite = {};int ret;if (data->display.is_atomic)@@ -425,7 +430,7 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags, }if (data->flags &TEST_FAIL_ON_ADDFB2 ) -return true; + goto out_free_fbs;igt_plane_set_position (primary,0 ,0 );igt_plane_set_size (primary, drm_mode->hdisplay, drm_mode->vdisplay);@@ -458,14 +463,16 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,igt_plane_set_position (data->plane,0 ,0 );igt_plane_set_size (data->plane,0 ,0 );igt_plane_set_fb (data->plane,NULL ); -igt_remove_fb (display->drm_fd, &fb_sprite); }
tests/kms_ccs.c static bool try_config(data_t *data, enum test_fb_flags fb_flags, · line 476
Quoted 10 lines
tests/kms_ccs.c +4
-1igt_plane_set_fb (primary,NULL );igt_plane_set_rotation (primary,IGT_ROTATION_0 );igt_display_commit2 (display, commit); -if (data->flags &TEST_CRC ) +out_free_fbs: +if (fb_sprite.fb_id) +igt_remove_fb (data->drm_fd, &fb_sprite); +if (fb.fb_id)igt_remove_fb (data->drm_fd, &fb);
These igt_remove_fb could be called unconditionally, they do as first things same check for fb_id
tests/kms_ccs.c static bool try_config(data_t *data, enum test_fb_flags fb_flags, · line 478
Quoted 3 lines
tests/kms_ccs.c +0
-0return true;
those are just minor comments, fix or no fix either way
Re: [igt-dev] [PATCH i-g-t 1/6] tests/kms_ccs: Make sure to free GEM and FB objects
Quoted 10 lines · Juha-Pekka Heikkila
Quoted 9 lines · Imre Deak
At the moment we're leaking the GEM and FB objects that could lead to OOM if multiple subtests are run (vs. each subtest in a seperate test run).
Signed-off-by Imre Deak <[email protected]>--- tests/kms_ccs.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
Quoted 14 lines
tests/kms_ccs.c static void generate_fb(data_t *data, struct igt_fb *fb, · line 351
Quoted 12 lines
tests/kms_ccs.c +4
-0@@ -345,6 +345,10 @@ static void generate_fb(data_t *data, struct igt_fb *fb,if (data->flags &TEST_FAIL_ON_ADDFB2 ) {igt_assert_eq (ret,-1 );igt_assert_eq (errno,EINVAL ); + +if (f.handles[index]) +gem_close (data->drm_fd, f.handles[index]); +I guess this
gem_closecould be called before doing asserts.
Ah yes, the assert will continue with the next subtest, doh:/
Quoted 29 lines
Quoted 29 lines
tests/kms_ccs.c +3
-4return ; }else igt_assert_eq (ret,0 );@@ -387,7 +391,8 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,drmModeModeInfo *drm_mode =igt_output_get_mode (data->output);int fb_width = drm_mode->hdisplay;enum igt_commit_style commit; -struct igt_fb fb, fb_sprite; +struct igt_fb fb = {}; +struct igt_fb fb_sprite = {};int ret;if (data->display.is_atomic)@@ -425,7 +430,7 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags, }if (data->flags &TEST_FAIL_ON_ADDFB2 ) -return true; + goto out_free_fbs;igt_plane_set_position (primary,0 ,0 );igt_plane_set_size (primary, drm_mode->hdisplay, drm_mode->vdisplay);@@ -458,14 +463,16 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,igt_plane_set_position (data->plane,0 ,0 );igt_plane_set_size (data->plane,0 ,0 );igt_plane_set_fb (data->plane,NULL ); -igt_remove_fb (display->drm_fd, &fb_sprite); }igt_plane_set_fb (primary,NULL );igt_plane_set_rotation (primary,IGT_ROTATION_0 );igt_display_commit2 (display, commit); -if (data->flags &TEST_CRC )
Quoted 8 lines
tests/kms_ccs.c static bool try_config(data_t *data, enum test_fb_flags fb_flags, · line 476
Quoted 5 lines
tests/kms_ccs.c +4
-0+out_free_fbs: +if (fb_sprite.fb_id) +igt_remove_fb (data->drm_fd, &fb_sprite); +if (fb.fb_id)igt_remove_fb (data->drm_fd, &fb);These
igt_remove_fbcould be called unconditionally, they do as first things same check forfb_id
Ok, missed that.
Quoted 6 lines
tests/kms_ccs.c static bool try_config(data_t *data, enum test_fb_flags fb_flags, · line 476
Quoted 2 lines
tests/kms_ccs.c +0
-0return true;those are just minor comments, fix or no fix either way
Reviewed-by Juha-Pekka Heikkila <[email protected]>
PATCH 2/6 tests/kms_ccs: Use test pattern when possible
In reply to Imre DeakA CRC match against a test pattern reference image gives a better guarantee than against a solid filled image, so use a test pattern instead.
The sprite tests compare a single solid filled reference plane against two overlapped solid filled planes for some reason, so for these subtests and the fast clear subtest still keep the solid filled pattern.
--- tests/kms_ccs.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
tests/kms_ccs.c +10 -4
@@ -329,15 +329,21 @@ static void generate_fb(data_t *data, struct igt_fb *fb,srand (data->seed);fill_fb_random (data->drm_fd, fb); }else if (!(data->flags &TEST_BAD_PIXEL_FORMAT )) { +bool do_fast_clear =is_ccs_cc_modifier (data->ccs_modifier); +bool do_solid_fill = do_fast_clear || data->plane;int c = !!data->plane; -if (is_ccs_cc_modifier (modifier)) { +if (do_fast_clear && (fb_flags &FB_COMPRESSED )) {fast_clear_fb (data->drm_fd, fb, cc_color); }else { cr =igt_get_cairo_ctx (data->drm_fd, fb); -igt_paint_color (cr,0 ,0 , width, height, - colors[c].r, colors[c].g, colors[c].b); -igt_put_cairo_ctx (cr); + +if (do_solid_fill) +igt_paint_color (cr,0 ,0 , width, height, + colors[c].r, colors[c].g, colors[c].b); +else +igt_paint_test_pattern (cr, width, height); +igt_put_cairo_ctx (cr); } }
Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 2/6] tests/kms_ccs: Use test pattern when possible
Quoted 18 lines · Imre Deak
A CRC match against a test pattern reference image gives a better guarantee than against a solid filled image, so use a test pattern instead.
The sprite tests compare a single solid filled reference plane against two overlapped solid filled planes for some reason, so for these subtests and the fast clear subtest still keep the solid filled pattern.
Signed-off-by Imre Deak <[email protected]>--- tests/kms_ccs.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)tests/kms_ccs.c +0
-0
tests/kms_ccs.c static void generate_fb(data_t *data, struct igt_fb *fb, · line 333
Quoted 5 lines
tests/kms_ccs.c +2
-0@@ -329,15 +329,21 @@ static void generate_fb(data_t *data, struct igt_fb *fb,srand (data->seed);fill_fb_random (data->drm_fd, fb); }else if (!(data->flags &TEST_BAD_PIXEL_FORMAT )) { +bool do_fast_clear =is_ccs_cc_modifier (data->ccs_modifier); +bool do_solid_fill = do_fast_clear || data->plane;
data->plane will be set when doing crc tests, why crc tests needed solid color?
Quoted 21 lines
tests/kms_ccs.c +8
-4int c = !!data->plane; -if (is_ccs_cc_modifier (modifier)) { +if (do_fast_clear && (fb_flags &FB_COMPRESSED )) {fast_clear_fb (data->drm_fd, fb, cc_color); }else { cr =igt_get_cairo_ctx (data->drm_fd, fb); -igt_paint_color (cr,0 ,0 , width, height, - colors[c].r, colors[c].g, colors[c].b); -igt_put_cairo_ctx (cr); + +if (do_solid_fill) +igt_paint_color (cr,0 ,0 , width, height, + colors[c].r, colors[c].g, colors[c].b); +else +igt_paint_test_pattern (cr, width, height); +igt_put_cairo_ctx (cr); } }
Juha-Pekka Heikkila
Reviewed-byRe: [igt-dev] [PATCH i-g-t 2/6] tests/kms_ccs: Use test pattern when possible
Quoted 14 lines · Juha-Pekka Heikkila
Quoted 13 lines · Imre Deak
A CRC match against a test pattern reference image gives a better guarantee than against a solid filled image, so use a test pattern instead.
The sprite tests compare a single solid filled reference plane against two overlapped solid filled planes for some reason, so for these subtests and the fast clear subtest still keep the solid filled pattern.
Signed-off-by Imre Deak <[email protected]>---
tests/kms_ccs.c| 14 ++++++++++----1 file changed, 10 insertions(+), 4 deletions(-)
Quoted 13 lines
tests/kms_ccs.c static void generate_fb(data_t *data, struct · line 334
Quoted 11 lines
tests/kms_ccs.c +2
-0@@ -329,15 +329,21 @@ static void generate_fb(data_t *data, structigt_fb *fb, srand(data->seed); fill_fb_random(data->drm_fd, fb); } else if (!(data->flags & TEST_BAD_PIXEL_FORMAT)) { + bool do_fast_clear = is_ccs_cc_modifier(data->ccs_modifier); + bool do_solid_fill = do_fast_clear || data->plane;
data->planewill be set when doing crc tests, why crc tests needed solid color?
After offline discussion we agree this is ok because of two plane case.
Quoted 21 lines
Quoted 20 lines
tests/kms_ccs.c +8
-4int c = !!data->plane; - if (is_ccs_cc_modifier(modifier)) { + if (do_fast_clear && (fb_flags & FB_COMPRESSED)) { fast_clear_fb(data->drm_fd, fb, cc_color); } else { cr = igt_get_cairo_ctx(data->drm_fd, fb); - igt_paint_color(cr, 0, 0, width, height, - colors[c].r, colors[c].g, colors[c].b); - igt_put_cairo_ctx(cr); + + if (do_solid_fill) + igt_paint_color(cr, 0, 0, width, height, + colors[c].r, colors[c].g, colors[c].b); + else + igt_paint_test_pattern(cr, width, height); + igt_put_cairo_ctx(cr); } }
PATCH 3/6 tests/kms_ccs: Fix small aux stride subtest
In reply to Imre DeakUse the correct CCS plane stride for the small aux stride subtest.
--- tests/kms_ccs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/kms_ccs.c +1 -1
@@ -307,7 +307,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb,if (fb_flags &FB_SMALL_AUX_STRIDE ) {igt_skip_on_f (width <=1024 ,"FB already has the smallest possible stride\n" ); - f.pitches[index] =ALIGN (f.pitches[1 ]/2 ,128 ); + f.pitches[index] =ALIGN (f.pitches[index]/2 ,128 ); }if (fb_flags &FB_ZERO_AUX_STRIDE )
Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 3/6] tests/kms_ccs: Fix small aux stride subtest
Quoted 21 lines · Imre Deak
Use the correct CCS plane stride for the small aux stride subtest.
Signed-off-by Imre Deak <[email protected]>--- tests/kms_ccs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tests/kms_ccs.c +1
-1@@ -307,7 +307,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb,if (fb_flags &FB_SMALL_AUX_STRIDE ) {igt_skip_on_f (width <=1024 ,"FB already has the smallest possible stride\n" ); - f.pitches[index] =ALIGN (f.pitches[1 ]/2 ,128 ); + f.pitches[index] =ALIGN (f.pitches[index]/2 ,128 ); }if (fb_flags &FB_ZERO_AUX_STRIDE )
PATCH 4/6 tests/kms_ccs: Test bad params for all CCS planes
In reply to Imre DeakTest creating an FB with incorrect CCS plane parameters for all CCS planes. While at it move all the incorrect FB parameter subtests earlier before generating an FB. For these subtests we won't modeset and so don't need to generate FBs with a test pattern. Exceptions are the bad-rotation subtests which also do a modeset.
--- tests/kms_ccs.c | 180 ++++++++++++++++++++++++++++++------------------ 1 file changed, 112 insertions(+), 68 deletions(-)
tests/kms_ccs.c +112 -68
@@ -44,9 +44,9 @@ enum test_flags { TEST_ALL_PLANES = 1 << 9, }; -#define TEST_FAIL_ON_ADDFB2 \ - (TEST_BAD_PIXEL_FORMAT | TEST_NO_AUX_BUFFER | TEST_BAD_CCS_HANDLE | \ - TEST_BAD_AUX_STRIDE) +#define TEST_BAD_CCS_PLANE (TEST_NO_AUX_BUFFER | TEST_BAD_CCS_HANDLE | \ + TEST_BAD_AUX_STRIDE) +#define TEST_FAIL_ON_ADDFB2 (TEST_BAD_PIXEL_FORMAT | TEST_BAD_CCS_PLANE)enum test_fb_flags {FB_COMPRESSED =1 <<0 ,
@@ -128,6 +128,17 @@ static void addfb_init(struct igt_fb *fb, struct drm_mode_fb_cmd2 *f) } } +static void +create_fb_prepare_add (int drm_fd,int width,int height, +uint32_t format,uint64_t modifier, +igt_fb_t *fb,struct drm_mode_fb_cmd2 *f) +{ +igt_create_bo_for_fb (drm_fd, width, height, format, modifier, fb); +igt_assert (fb->gem_handle >0 ); + +addfb_init (fb, f); +} +static bool is_ccs_cc_modifier (uint64_t modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ;
@@ -226,14 +237,96 @@ static void fill_fb_random(int drm_fd, igt_fb_t *fb)munmap (map, fb->size); } -static int get_ccs_plane_index (uint32_t format) +static void test_bad_ccs_plane (data_t *data,int width,int height,int ccs_plane, +enum test_fb_flags fb_flags) { -int index =1 ; +struct igt_fb fb = {}; +struct drm_mode_fb_cmd2 f = {}; +uint32_t bad_ccs_bo =0 ; +int ret; -if (igt_format_is_yuv_semiplanar (format)) -return 2 ; +igt_assert (fb_flags &FB_COMPRESSED ); +create_fb_prepare_add (data->drm_fd, width, height, + data->format, data->ccs_modifier, + &fb, &f); -return index; +/* +* The stride of CCS planes on GEN12+ is fixed, so we can check for +* an incorrect stride with the same delta as on earlier platforms. +*/ +if (fb_flags &FB_MISALIGN_AUX_STRIDE ) { +igt_skip_on_f (width <=1024 , +"FB already has the smallest possible stride\n" ); + f.pitches[ccs_plane] -=64 ; + } + +if (fb_flags &FB_SMALL_AUX_STRIDE ) { +igt_skip_on_f (width <=1024 , +"FB already has the smallest possible stride\n" ); + f.pitches[ccs_plane] =ALIGN (f.pitches[ccs_plane] /2 ,128 ); + } + +if (fb_flags &FB_ZERO_AUX_STRIDE ) + f.pitches[ccs_plane] =0 ; + +/* Put the CCS buffer on a different BO. */ +if (data->flags &TEST_BAD_CCS_HANDLE ) { + bad_ccs_bo =gem_create (data->drm_fd, fb.size); + f.handles[ccs_plane] = bad_ccs_bo; + } + +if (data->flags &TEST_NO_AUX_BUFFER ) { + f.handles[ccs_plane] =0 ; + f.modifier[ccs_plane] =0 ; + f.pitches[ccs_plane] =0 ; + f.offsets[ccs_plane] =0 ; + } + + ret =drmIoctl (data->drm_fd,DRM_IOCTL_MODE_ADDFB2 , &f); +igt_assert_eq (ret,-1 ); +igt_assert_eq (errno,EINVAL ); + +if (bad_ccs_bo) +gem_close (data->drm_fd, bad_ccs_bo); + +gem_close (data->drm_fd, fb.gem_handle); +} + +static void test_bad_ccs_plane_params (data_t *data,int width,int height, +enum test_fb_flags fb_flags) +{ +for (int ccs_plane =1 ; + ccs_plane <= (igt_format_is_yuv_semiplanar (data->format) ?2 :1 ); + ccs_plane++) +test_bad_ccs_plane (data, width, height, ccs_plane, fb_flags); +} + +static void test_bad_pixel_format (data_t *data,int width,int height, +enum test_fb_flags fb_flags) +{ +struct igt_fb fb = {}; +struct drm_mode_fb_cmd2 f = {}; +int ret; + +igt_assert (fb_flags &FB_COMPRESSED ); +create_fb_prepare_add (data->drm_fd, width, height, +DRM_FORMAT_RGB565 , data->ccs_modifier, + &fb, &f); + + ret =drmIoctl (data->drm_fd,DRM_IOCTL_MODE_ADDFB2 , &f); +igt_assert_eq (ret,-1 ); +igt_assert_eq (errno,EINVAL ); + +gem_close (data->drm_fd, fb.gem_handle); +} + +static void test_bad_fb_params (data_t *data,int width,int height,enum test_fb_flags fb_flags) +{ +if (data->flags &TEST_BAD_PIXEL_FORMAT ) +test_bad_pixel_format (data, width, height, fb_flags); + +if (data->flags &TEST_BAD_CCS_PLANE ) +test_bad_ccs_plane_params (data, width, height, fb_flags); }static void fast_clear_fb (int drm_fd,struct igt_fb *fb,const float *cc_color)
@@ -259,16 +352,15 @@ static void generate_fb(data_t *data, struct igt_fb *fb, enum test_fb_flags fb_flags) {struct drm_mode_fb_cmd2 f = {0 }; -uint32_t format;uint64_t modifier;cairo_t *cr; -int index;int ret;const float cc_color[4 ] = {colors[!!data->plane].r, colors[!!data->plane].g, colors[!!data->plane].b,1.0 }; +/* Use either compressed or Y-tiled to test. However, given the lack of * available bandwidth, we use linear for the primary plane when * testing sprites, since we cannot fit two CCS planes into the
@@ -281,54 +373,14 @@ static void generate_fb(data_t *data, struct igt_fb *fb,else modifier =0 ; -if (data->flags &TEST_BAD_PIXEL_FORMAT ) - format =DRM_FORMAT_RGB565 ; -else - format = data->format; - - index =get_ccs_plane_index (format); - -igt_create_bo_for_fb (data->drm_fd, width, height, format, modifier, fb); -igt_assert (fb->gem_handle >0 ); - -addfb_init (fb, &f); - -/* -* The stride of CCS planes on GEN12+ is fixed, so we can check for -* an incorrect stride with the same delta as on earlier platforms. -*/ -if (fb_flags &FB_COMPRESSED ) { -if (fb_flags &FB_MISALIGN_AUX_STRIDE ) { -igt_skip_on_f (width <=1024 , -"FB already has the smallest possible stride\n" ); - f.pitches[index] -=64 ; - } - -if (fb_flags &FB_SMALL_AUX_STRIDE ) { -igt_skip_on_f (width <=1024 , -"FB already has the smallest possible stride\n" ); - f.pitches[index] =ALIGN (f.pitches[index]/2 ,128 ); - } - -if (fb_flags &FB_ZERO_AUX_STRIDE ) - f.pitches[index] =0 ; - -/* Put the CCS buffer on a different BO. */ -if (data->flags &TEST_BAD_CCS_HANDLE ) - f.handles[index] =gem_create (data->drm_fd, fb->size); - -if (data->flags &TEST_NO_AUX_BUFFER ) { - f.handles[index] =0 ; - f.modifier[index] =0 ; - f.pitches[index] =0 ; - f.offsets[index] =0 ; - } - } +create_fb_prepare_add (data->drm_fd, width, height, + data->format, modifier, + fb, &f);if (data->flags &TEST_RANDOM ) {srand (data->seed);fill_fb_random (data->drm_fd, fb); - }else if (!(data->flags &TEST_BAD_PIXEL_FORMAT )) { + }else {bool do_fast_clear =is_ccs_cc_modifier (data->ccs_modifier);bool do_solid_fill = do_fast_clear || data->plane;int c = !!data->plane;
@@ -348,16 +400,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb, } ret =drmIoctl (data->drm_fd,DRM_IOCTL_MODE_ADDFB2 , &f); -if (data->flags &TEST_FAIL_ON_ADDFB2 ) { -igt_assert_eq (ret,-1 ); -igt_assert_eq (errno,EINVAL ); - -if (f.handles[index]) -gem_close (data->drm_fd, f.handles[index]); - -return ; - }else -igt_assert_eq (ret,0 ); +igt_assert_eq (ret,0 );if (check_ccs_planes)check_all_ccs_planes (data->drm_fd, fb, cc_color, !(data->flags &TEST_RANDOM ));
@@ -423,6 +466,11 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags, fb_width =min (MAX_SPRITE_PLANE_WIDTH , fb_width); +if (data->flags &TEST_FAIL_ON_ADDFB2 ) { +test_bad_fb_params (data, fb_width, drm_mode->vdisplay, fb_flags); +return true; + } +if (data->plane && fb_flags &FB_COMPRESSED ) {if (!igt_plane_has_format_mod (data->plane, data->format, data->ccs_modifier))
@@ -435,9 +483,6 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,generate_fb (data, &fb, fb_width, drm_mode->vdisplay, fb_flags); } -if (data->flags &TEST_FAIL_ON_ADDFB2 ) - goto out_free_fbs; -igt_plane_set_position (primary,0 ,0 );igt_plane_set_size (primary, drm_mode->hdisplay, drm_mode->vdisplay);igt_plane_set_fb (primary, &fb);
@@ -475,7 +520,6 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,igt_plane_set_rotation (primary,IGT_ROTATION_0 );igt_display_commit2 (display, commit); -out_free_fbs:if (fb_sprite.fb_id)igt_remove_fb (data->drm_fd, &fb_sprite);if (fb.fb_id)
Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 4/6] tests/kms_ccs: Test bad params for all CCS planes
Look ok to me
Quoted 274 lines · Imre Deak
Test creating an FB with incorrect CCS plane parameters for all CCS planes. While at it move all the incorrect FB parameter subtests earlier before generating an FB. For these subtests we won't modeset and so don't need to generate FBs with a test pattern. Exceptions are the bad-rotation subtests which also do a modeset.
Signed-off-by Imre Deak <[email protected]>--- tests/kms_ccs.c | 180 ++++++++++++++++++++++++++++++------------------ 1 file changed, 112 insertions(+), 68 deletions(-)tests/kms_ccs.c +112
-68@@ -44,9 +44,9 @@ enum test_flags { TEST_ALL_PLANES = 1 << 9, }; -#define TEST_FAIL_ON_ADDFB2 \ - (TEST_BAD_PIXEL_FORMAT | TEST_NO_AUX_BUFFER | TEST_BAD_CCS_HANDLE | \ - TEST_BAD_AUX_STRIDE) +#define TEST_BAD_CCS_PLANE (TEST_NO_AUX_BUFFER | TEST_BAD_CCS_HANDLE | \ + TEST_BAD_AUX_STRIDE) +#define TEST_FAIL_ON_ADDFB2 (TEST_BAD_PIXEL_FORMAT | TEST_BAD_CCS_PLANE)enum test_fb_flags {FB_COMPRESSED =1 <<0 ,@@ -128,6 +128,17 @@ static void addfb_init(struct igt_fb *fb, struct drm_mode_fb_cmd2 *f) } } +static void +create_fb_prepare_add (int drm_fd,int width,int height, +uint32_t format,uint64_t modifier, +igt_fb_t *fb,struct drm_mode_fb_cmd2 *f) +{ +igt_create_bo_for_fb (drm_fd, width, height, format, modifier, fb); +igt_assert (fb->gem_handle >0 ); + +addfb_init (fb, f); +} +static bool is_ccs_cc_modifier (uint64_t modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ;@@ -226,14 +237,96 @@ static void fill_fb_random(int drm_fd, igt_fb_t *fb)munmap (map, fb->size); } -static int get_ccs_plane_index (uint32_t format) +static void test_bad_ccs_plane (data_t *data,int width,int height,int ccs_plane, +enum test_fb_flags fb_flags) { -int index =1 ; +struct igt_fb fb = {}; +struct drm_mode_fb_cmd2 f = {}; +uint32_t bad_ccs_bo =0 ; +int ret; -if (igt_format_is_yuv_semiplanar (format)) -return 2 ; +igt_assert (fb_flags &FB_COMPRESSED ); +create_fb_prepare_add (data->drm_fd, width, height, + data->format, data->ccs_modifier, + &fb, &f); -return index; +/* +* The stride of CCS planes on GEN12+ is fixed, so we can check for +* an incorrect stride with the same delta as on earlier platforms. +*/ +if (fb_flags &FB_MISALIGN_AUX_STRIDE ) { +igt_skip_on_f (width <=1024 , +"FB already has the smallest possible stride\n" ); + f.pitches[ccs_plane] -=64 ; + } + +if (fb_flags &FB_SMALL_AUX_STRIDE ) { +igt_skip_on_f (width <=1024 , +"FB already has the smallest possible stride\n" ); + f.pitches[ccs_plane] =ALIGN (f.pitches[ccs_plane] /2 ,128 ); + } + +if (fb_flags &FB_ZERO_AUX_STRIDE ) + f.pitches[ccs_plane] =0 ; + +/* Put the CCS buffer on a different BO. */ +if (data->flags &TEST_BAD_CCS_HANDLE ) { + bad_ccs_bo =gem_create (data->drm_fd, fb.size); + f.handles[ccs_plane] = bad_ccs_bo; + } + +if (data->flags &TEST_NO_AUX_BUFFER ) { + f.handles[ccs_plane] =0 ; + f.modifier[ccs_plane] =0 ; + f.pitches[ccs_plane] =0 ; + f.offsets[ccs_plane] =0 ; + } + + ret =drmIoctl (data->drm_fd,DRM_IOCTL_MODE_ADDFB2 , &f); +igt_assert_eq (ret,-1 ); +igt_assert_eq (errno,EINVAL ); + +if (bad_ccs_bo) +gem_close (data->drm_fd, bad_ccs_bo); + +gem_close (data->drm_fd, fb.gem_handle); +} + +static void test_bad_ccs_plane_params (data_t *data,int width,int height, +enum test_fb_flags fb_flags) +{ +for (int ccs_plane =1 ; + ccs_plane <= (igt_format_is_yuv_semiplanar (data->format) ?2 :1 ); + ccs_plane++) +test_bad_ccs_plane (data, width, height, ccs_plane, fb_flags); +} + +static void test_bad_pixel_format (data_t *data,int width,int height, +enum test_fb_flags fb_flags) +{ +struct igt_fb fb = {}; +struct drm_mode_fb_cmd2 f = {}; +int ret; + +igt_assert (fb_flags &FB_COMPRESSED ); +create_fb_prepare_add (data->drm_fd, width, height, +DRM_FORMAT_RGB565 , data->ccs_modifier, + &fb, &f); + + ret =drmIoctl (data->drm_fd,DRM_IOCTL_MODE_ADDFB2 , &f); +igt_assert_eq (ret,-1 ); +igt_assert_eq (errno,EINVAL ); + +gem_close (data->drm_fd, fb.gem_handle); +} + +static void test_bad_fb_params (data_t *data,int width,int height,enum test_fb_flags fb_flags) +{ +if (data->flags &TEST_BAD_PIXEL_FORMAT ) +test_bad_pixel_format (data, width, height, fb_flags); + +if (data->flags &TEST_BAD_CCS_PLANE ) +test_bad_ccs_plane_params (data, width, height, fb_flags); }static void fast_clear_fb (int drm_fd,struct igt_fb *fb,const float *cc_color)@@ -259,16 +352,15 @@ static void generate_fb(data_t *data, struct igt_fb *fb, enum test_fb_flags fb_flags) {struct drm_mode_fb_cmd2 f = {0 }; -uint32_t format;uint64_t modifier;cairo_t *cr; -int index;int ret;const float cc_color[4 ] = {colors[!!data->plane].r, colors[!!data->plane].g, colors[!!data->plane].b,1.0 }; +/* Use either compressed or Y-tiled to test. However, given the lack of * available bandwidth, we use linear for the primary plane when * testing sprites, since we cannot fit two CCS planes into the @@ -281,54 +373,14 @@ static void generate_fb(data_t *data, struct igt_fb *fb,else modifier =0 ; -if (data->flags &TEST_BAD_PIXEL_FORMAT ) - format =DRM_FORMAT_RGB565 ; -else - format = data->format; - - index =get_ccs_plane_index (format); - -igt_create_bo_for_fb (data->drm_fd, width, height, format, modifier, fb); -igt_assert (fb->gem_handle >0 ); - -addfb_init (fb, &f); - -/* -* The stride of CCS planes on GEN12+ is fixed, so we can check for -* an incorrect stride with the same delta as on earlier platforms. -*/ -if (fb_flags &FB_COMPRESSED ) { -if (fb_flags &FB_MISALIGN_AUX_STRIDE ) { -igt_skip_on_f (width <=1024 , -"FB already has the smallest possible stride\n" ); - f.pitches[index] -=64 ; - } - -if (fb_flags &FB_SMALL_AUX_STRIDE ) { -igt_skip_on_f (width <=1024 , -"FB already has the smallest possible stride\n" ); - f.pitches[index] =ALIGN (f.pitches[index]/2 ,128 ); - } - -if (fb_flags &FB_ZERO_AUX_STRIDE ) - f.pitches[index] =0 ; - -/* Put the CCS buffer on a different BO. */ -if (data->flags &TEST_BAD_CCS_HANDLE ) - f.handles[index] =gem_create (data->drm_fd, fb->size); - -if (data->flags &TEST_NO_AUX_BUFFER ) { - f.handles[index] =0 ; - f.modifier[index] =0 ; - f.pitches[index] =0 ; - f.offsets[index] =0 ; - } - } +create_fb_prepare_add (data->drm_fd, width, height, + data->format, modifier, + fb, &f);if (data->flags &TEST_RANDOM ) {srand (data->seed);fill_fb_random (data->drm_fd, fb); - }else if (!(data->flags &TEST_BAD_PIXEL_FORMAT )) { + }else {bool do_fast_clear =is_ccs_cc_modifier (data->ccs_modifier);bool do_solid_fill = do_fast_clear || data->plane;int c = !!data->plane;@@ -348,16 +400,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb, } ret =drmIoctl (data->drm_fd,DRM_IOCTL_MODE_ADDFB2 , &f); -if (data->flags &TEST_FAIL_ON_ADDFB2 ) { -igt_assert_eq (ret,-1 ); -igt_assert_eq (errno,EINVAL ); - -if (f.handles[index]) -gem_close (data->drm_fd, f.handles[index]); - -return ; - }else -igt_assert_eq (ret,0 ); +igt_assert_eq (ret,0 );if (check_ccs_planes)check_all_ccs_planes (data->drm_fd, fb, cc_color, !(data->flags &TEST_RANDOM ));@@ -423,6 +466,11 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags, fb_width =min (MAX_SPRITE_PLANE_WIDTH , fb_width); +if (data->flags &TEST_FAIL_ON_ADDFB2 ) { +test_bad_fb_params (data, fb_width, drm_mode->vdisplay, fb_flags); +return true; + } +if (data->plane && fb_flags &FB_COMPRESSED ) {if (!igt_plane_has_format_mod (data->plane, data->format, data->ccs_modifier))@@ -435,9 +483,6 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,generate_fb (data, &fb, fb_width, drm_mode->vdisplay, fb_flags); } -if (data->flags &TEST_FAIL_ON_ADDFB2 ) - goto out_free_fbs; -igt_plane_set_position (primary,0 ,0 );igt_plane_set_size (primary, drm_mode->hdisplay, drm_mode->vdisplay);igt_plane_set_fb (primary, &fb);@@ -475,7 +520,6 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,igt_plane_set_rotation (primary,IGT_ROTATION_0 );igt_display_commit2 (display, commit); -out_free_fbs:if (fb_sprite.fb_id)igt_remove_fb (data->drm_fd, &fb_sprite);if (fb.fb_id)
PATCH 5/6 lib/igt_fb: Add support for remapping CCS FBs
In reply to Imre DeakHaving a kernel support for this, CCS framebuffer strides don't need to be power-of-two aligned, the kernel will auto-pad the stride.
Only the main surface tiles can be remapped and the AUX surface must be generated to align with the POT padded main surface stride. Add the required AUX pagetable programming for this.
Since the AUX pagetable has a granularity of 64 kbytes on the main surface, mapped by one AUX PTE, the main surface stride must be either 8 tiles, or the stride must be aligned to 16 tiles.
--- lib/igt_fb.c | 24 ++++++++------- lib/intel_aux_pgtable.c | 66 ++++++++++++++++++++++++++++++++++++----- 2 files changed, 72 insertions(+), 18 deletions(-)
lib/igt_fb.c +14 -10
@@ -780,23 +780,27 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)return ALIGN (min_stride, align); }else {unsigned int tile_width, tile_height; -uint32_t stride; +int tile_align =1 ;igt_get_fb_tile_size (fb->fd, fb->modifier, fb->plane_bpp[plane], &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { - stride =ALIGN (min_stride, tile_width *4 ); - -/* TODO: add support to kernel to POT align CCS format strides */ -if (is_i915_device (fb->fd) && -IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) - stride =roundup_power_of_two (max (stride, tile_width *8 )); - }else { - stride =ALIGN (min_stride, tile_width); +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +/* +* The main surface stride must be aligned to the CCS AUX +* page table block size (covered by one AUX PTE). This +* block size is 64kb -> 16 tiles. +* We can do away padding an 8 tile stride to 16, since in +* this case one AUX PTE entry will cover 2 main surface +* tile rows. +*/ + tile_align = (min_stride <=8 * tile_width) ?8 :16 ; +else + tile_align =4 ; } -return stride; +return ALIGN (min_stride, tile_width * tile_align); } }
lib/intel_aux_pgtable.c +58 -8
86 lines not on this page · raw message
Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 5/6] lib/igt_fb: Add support for remapping CCS FBs
Look ok to me
Quoted 152 lines · Imre Deak
Having a kernel support for this, CCS framebuffer strides don't need to be power-of-two aligned, the kernel will auto-pad the stride.
Only the main surface tiles can be remapped and the AUX surface must be generated to align with the POT padded main surface stride. Add the required AUX pagetable programming for this.
Since the AUX pagetable has a granularity of 64 kbytes on the main surface, mapped by one AUX PTE, the main surface stride must be either 8 tiles, or the stride must be aligned to 16 tiles.
Signed-off-by Imre Deak <[email protected]>--- lib/igt_fb.c | 24 ++++++++------- lib/intel_aux_pgtable.c | 66 ++++++++++++++++++++++++++++++++++++----- 2 files changed, 72 insertions(+), 18 deletions(-)lib/igt_fb.c +14
-10@@ -780,23 +780,27 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)return ALIGN (min_stride, align); }else {unsigned int tile_width, tile_height; -uint32_t stride; +int tile_align =1 ;igt_get_fb_tile_size (fb->fd, fb->modifier, fb->plane_bpp[plane], &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { - stride =ALIGN (min_stride, tile_width *4 ); - -/* TODO: add support to kernel to POT align CCS format strides */ -if (is_i915_device (fb->fd) && -IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) - stride =roundup_power_of_two (max (stride, tile_width *8 )); - }else { - stride =ALIGN (min_stride, tile_width); +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +/* +* The main surface stride must be aligned to the CCS AUX +* page table block size (covered by one AUX PTE). This +* block size is 64kb -> 16 tiles. +* We can do away padding an 8 tile stride to 16, since in +* this case one AUX PTE entry will cover 2 main surface +* tile rows. +*/ + tile_align = (min_stride <=8 * tile_width) ?8 :16 ; +else + tile_align =4 ; } -return stride; +return ALIGN (min_stride, tile_width * tile_align); } }lib/intel_aux_pgtable.c +58
-8@@ -7,6 +7,8 @@#include "intel_bufops.h" #include "ioctl_wrappers.h" +#include "lib/intel_chipset.h" +#include "i915/gem_mman.h" #define BITS_PER_LONG_LONG (sizeof(long long) * 8)@@ -356,22 +358,70 @@ pgt_populate_entries_for_buf(struct pgtable *pgt,uint64_t aux_addr = buf->addr.offset + buf->ccs[surface_idx].offset;uint64_t l1_flags =pgt_get_l1_flags (buf, surface_idx);uint64_t lx_flags =pgt_get_lx_flags (); +int surface_tile_align; +int surface_src_row_tiles = buf->surface[surface_idx].stride /128 ; +/* +* The span of tiles in the FB object mapped by one AUX PTE +* entry, which can be one or more tile rows. +*/ +int surface_src_span_tiles =ALIGN (surface_src_row_tiles,16 ); +int surface_src_span_size = surface_src_span_tiles *4096 ; +/* +* The number of tiles in a tile row on the surface auto-padded by +* the kernel if necessary (to a power-of-two size on ADL-P). +*/ +int surface_dst_row_tiles; +/* +* The span of tiles on the auto-padded surface, including the +* tiles in the FB object accounted by surface_src_span_tiles and +* any padding tiles. +*/ +int surface_dst_span_tiles; +/* +* The size of CCS data mapping a surface_dst_span_tiles sized area +* on the main surface. +*/ +int aux_dst_span_size; +int surface_span_offset =0 ; +int aux_span_offset =0 ; -igt_assert (!(buf->surface[surface_idx].stride %512 )); -igt_assert_eq (buf->ccs[surface_idx].stride, - buf->surface[surface_idx].stride /512 *64 ); +if (IS_ALDERLAKE_P (buf->ibb->devid)) { + surface_tile_align = surface_src_row_tiles <=8 ?8 :16 ; + surface_dst_row_tiles =roundup_power_of_two (surface_src_row_tiles); + surface_dst_span_tiles =roundup_power_of_two (surface_src_span_tiles); + }else { + surface_tile_align =4 ; + surface_dst_row_tiles = surface_src_row_tiles; + surface_dst_span_tiles = surface_src_span_tiles; + } -for (; surface_addr < surface_end; - surface_addr +=MAIN_SURFACE_BLOCK_SIZE , - aux_addr +=AUX_CCS_BLOCK_SIZE ) { + aux_dst_span_size = surface_dst_span_tiles /16 *AUX_CCS_BLOCK_SIZE ; + +igt_assert_eq (buf->surface[surface_idx].stride % (128 * surface_tile_align),0 ); +igt_assert_eq (buf->ccs[surface_idx].stride, surface_dst_row_tiles /4 *64 ); + +while (surface_addr + surface_span_offset < surface_end) {uint64_t table = top_table;int level;for (level = pgt->levels -1 ; level >=1 ; level--) table =pgt_get_child_table (pgt, table, level, - surface_addr, lx_flags); + surface_addr + surface_span_offset, lx_flags); -pgt_set_l1_entry (pgt, table, surface_addr, aux_addr, l1_flags); +pgt_set_l1_entry (pgt, table, + surface_addr + surface_span_offset, + aux_addr + aux_span_offset, l1_flags); + + surface_span_offset +=MAIN_SURFACE_BLOCK_SIZE ; + aux_span_offset +=AUX_CCS_BLOCK_SIZE ; + +if (surface_span_offset >= surface_src_span_size) { + surface_addr += surface_src_span_size; + surface_span_offset =0 ; + + aux_addr += aux_dst_span_size; + aux_span_offset =0 ; + } } }
PATCH 6/6 for-ci: Check for ccs remap support
In reply to Imre DeakRemove the power-of-two stride size restriction only if there is a kernel support for this.
--- lib/igt_fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 5 deletions(-)
lib/igt_fb.c +60 -5
@@ -715,6 +715,55 @@ void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, } } +static bool adlp_ccs_remap_supported (int drm_fd) +{ +uint64_t modifier =I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ; +uint64_t size; +uint32_t width =48 *32 ;/* Min stride with remapping to 48->64 tiles */ +uint32_t height =32 *32 ;/* 4 tile aligned height */ +uint32_t format =DRM_FORMAT_XRGB8888 ; +uint32_t strides[4 ] = {}; +uint32_t offsets[4 ] = {}; +uint32_t bo; +uint32_t fb_id; +static int supported =-1 ; + +if (supported !=-1 ) +return supported; + + strides[0 ] = width *4 ; + strides[1 ] =roundup_power_of_two (strides[0 ] /512 ) *64 ; + + offsets[0 ] =0 ; +/* Ensure CCS plane 1 is misaligned. */ + offsets[1 ] =ALIGN (offsets[0 ] + strides[0 ] * height,2 *1024 *1024 ) +4096 ; + + size = offsets[1 ] + strides[1 ] * height /32 ; + + bo =gem_buffer_create_fb_obj (drm_fd, size); +igt_assert (bo); + +if (__kms_addfb (drm_fd, bo, + width, height, + format, modifier, + strides, offsets, +2 , +DRM_MODE_FB_MODIFIERS , &fb_id) !=0 ) { + supported =0 ; +igt_debug ("CCS framebuffer remapping not supported.\n" ); + +return false; + } + +igt_ioctl (drm_fd,DRM_IOCTL_MODE_RMFB , &fb_id); +gem_close (drm_fd, bo); + + supported =1 ; +igt_debug ("CCS framebuffer remapping supported\n" ); + +return true; +} +static uint32_t calc_plane_stride (struct igt_fb *fb,int plane) { uint32_t min_stride = fb->plane_width[plane] *
@@ -786,7 +835,7 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane) &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) {/* * The main surface stride must be aligned to the CCS AUX * page table block size (covered by one AUX PTE). This
@@ -796,8 +845,13 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)* tile rows. */ tile_align = (min_stride <=8 * tile_width) ?8 :16 ; - else +if (!adlp_ccs_remap_supported (fb->fd)) { + tile_align =roundup_power_of_two (min_stride) /128 ; + tile_align =max (tile_align,8 ); + } + }else { tile_align =4 ; + } }return ALIGN (min_stride, tile_width * tile_align);
@@ -848,7 +902,8 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;
@@ -870,9 +925,9 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (is_i915_device (fb->fd) && +if (is_ccs_modifier (fb->modifier) &&IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && -is_ccs_modifier (fb->modifier)) + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;
Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 6/6] for-ci: Check for ccs remap support
I wonder if this was unnecessary? I think those ccs tests will only run on shards and there's no adlp in shards yet?
/Juha-Pekka
Quoted 115 lines · Imre Deak
Remove the power-of-two stride size restriction only if there is a kernel support for this.
Signed-off-by Imre Deak <[email protected]>--- lib/igt_fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 5 deletions(-)lib/igt_fb.c +60
-5@@ -715,6 +715,55 @@ void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, } } +static bool adlp_ccs_remap_supported (int drm_fd) +{ +uint64_t modifier =I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ; +uint64_t size; +uint32_t width =48 *32 ;/* Min stride with remapping to 48->64 tiles */ +uint32_t height =32 *32 ;/* 4 tile aligned height */ +uint32_t format =DRM_FORMAT_XRGB8888 ; +uint32_t strides[4 ] = {}; +uint32_t offsets[4 ] = {}; +uint32_t bo; +uint32_t fb_id; +static int supported =-1 ; + +if (supported !=-1 ) +return supported; + + strides[0 ] = width *4 ; + strides[1 ] =roundup_power_of_two (strides[0 ] /512 ) *64 ; + + offsets[0 ] =0 ; +/* Ensure CCS plane 1 is misaligned. */ + offsets[1 ] =ALIGN (offsets[0 ] + strides[0 ] * height,2 *1024 *1024 ) +4096 ; + + size = offsets[1 ] + strides[1 ] * height /32 ; + + bo =gem_buffer_create_fb_obj (drm_fd, size); +igt_assert (bo); + +if (__kms_addfb (drm_fd, bo, + width, height, + format, modifier, + strides, offsets, +2 , +DRM_MODE_FB_MODIFIERS , &fb_id) !=0 ) { + supported =0 ; +igt_debug ("CCS framebuffer remapping not supported.\n" ); + +return false; + } + +igt_ioctl (drm_fd,DRM_IOCTL_MODE_RMFB , &fb_id); +gem_close (drm_fd, bo); + + supported =1 ; +igt_debug ("CCS framebuffer remapping supported\n" ); + +return true; +} +static uint32_t calc_plane_stride (struct igt_fb *fb,int plane) { uint32_t min_stride = fb->plane_width[plane] *@@ -786,7 +835,7 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane) &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) {/* * The main surface stride must be aligned to the CCS AUX * page table block size (covered by one AUX PTE). This @@ -796,8 +845,13 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)* tile rows. */ tile_align = (min_stride <=8 * tile_width) ?8 :16 ; - else +if (!adlp_ccs_remap_supported (fb->fd)) { + tile_align =roundup_power_of_two (min_stride) /128 ; + tile_align =max (tile_align,8 ); + } + }else { tile_align =4 ; + } }return ALIGN (min_stride, tile_width * tile_align);@@ -848,7 +902,8 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;@@ -870,9 +925,9 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (is_i915_device (fb->fd) && +if (is_ccs_modifier (fb->modifier) &&IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && -is_ccs_modifier (fb->modifier)) + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;
Re: [igt-dev] [PATCH i-g-t 6/6] for-ci: Check for ccs remap support
Quoted 1 line · Juha-Pekka Heikkila
I wonder if this was unnecessary?
It wasn't strictly necessary. I thought to test the AUX pagetable programming w/o the kernel support for remapping as well (also on the shards run).
Quoted 2 lines
I think those ccs tests will only run on shards and there's no adlp in shards yet?
Ok, though the TGL results are still interesting to me (the AUX pagetable programming changed for that too).
Quoted 114 lines
/Juha-Pekka
Quoted 110 lines · Imre Deak
Remove the power-of-two stride size restriction only if there is a kernel support for this.
Signed-off-by Imre Deak <[email protected]>--- lib/igt_fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 5 deletions(-)lib/igt_fb.c +60
-5@@ -715,6 +715,55 @@ void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, } } +static bool adlp_ccs_remap_supported (int drm_fd) +{ +uint64_t modifier =I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ; +uint64_t size; +uint32_t width =48 *32 ;/* Min stride with remapping to 48->64 tiles */ +uint32_t height =32 *32 ;/* 4 tile aligned height */ +uint32_t format =DRM_FORMAT_XRGB8888 ; +uint32_t strides[4 ] = {}; +uint32_t offsets[4 ] = {}; +uint32_t bo; +uint32_t fb_id; +static int supported =-1 ; + +if (supported !=-1 ) +return supported; + + strides[0 ] = width *4 ; + strides[1 ] =roundup_power_of_two (strides[0 ] /512 ) *64 ; + + offsets[0 ] =0 ; +/* Ensure CCS plane 1 is misaligned. */ + offsets[1 ] =ALIGN (offsets[0 ] + strides[0 ] * height,2 *1024 *1024 ) +4096 ; + + size = offsets[1 ] + strides[1 ] * height /32 ; + + bo =gem_buffer_create_fb_obj (drm_fd, size); +igt_assert (bo); + +if (__kms_addfb (drm_fd, bo, + width, height, + format, modifier, + strides, offsets, +2 , +DRM_MODE_FB_MODIFIERS , &fb_id) !=0 ) { + supported =0 ; +igt_debug ("CCS framebuffer remapping not supported.\n" ); + +return false; + } + +igt_ioctl (drm_fd,DRM_IOCTL_MODE_RMFB , &fb_id); +gem_close (drm_fd, bo); + + supported =1 ; +igt_debug ("CCS framebuffer remapping supported\n" ); + +return true; +} +static uint32_t calc_plane_stride (struct igt_fb *fb,int plane) { uint32_t min_stride = fb->plane_width[plane] *@@ -786,7 +835,7 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane) &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) {/* * The main surface stride must be aligned to the CCS AUX * page table block size (covered by one AUX PTE). This @@ -796,8 +845,13 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)* tile rows. */ tile_align = (min_stride <=8 * tile_width) ?8 :16 ; - else +if (!adlp_ccs_remap_supported (fb->fd)) { + tile_align =roundup_power_of_two (min_stride) /128 ; + tile_align =max (tile_align,8 ); + } + }else { tile_align =4 ; + } }return ALIGN (min_stride, tile_width * tile_align);@@ -848,7 +902,8 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;@@ -870,9 +925,9 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (is_i915_device (fb->fd) && +if (is_ccs_modifier (fb->modifier) &&IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && -is_ccs_modifier (fb->modifier)) + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;
Re: [igt-dev] [PATCH i-g-t 6/6] for-ci: Check for ccs remap support
In reply to Imre DeakQuoted 18 lines · Imre Deak
Remove the power-of-two stride size restriction only if there is a kernel support for this.
Signed-off-by Imre Deak <[email protected]>--- lib/igt_fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 5 deletions(-)lib/igt_fb.c +2
-0@@ -715,6 +715,55 @@ void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, } } +static bool adlp_ccs_remap_supported (int drm_fd) +{
lib/igt_fb.c void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, · line 729
Quoted 10 lines
lib/igt_fb.c +10
-0+uint64_t modifier =I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ; +uint64_t size; +uint32_t width =48 *32 ;/* Min stride with remapping to 48->64 tiles */ +uint32_t height =32 *32 ;/* 4 tile aligned height */ +uint32_t format =DRM_FORMAT_XRGB8888 ; +uint32_t strides[4 ] = {}; +uint32_t offsets[4 ] = {}; +uint32_t bo; +uint32_t fb_id; +static int supported =-1 ;
Just for making sure - 'supported' is kernel feature or behavior for specific gen? For latter case it shouldn't be cached.
--
Zbigniew
Quoted 89 lines
lib/igt_fb.c +48
-5+ +if (supported !=-1 ) +return supported; + + strides[0 ] = width *4 ; + strides[1 ] =roundup_power_of_two (strides[0 ] /512 ) *64 ; + + offsets[0 ] =0 ; +/* Ensure CCS plane 1 is misaligned. */ + offsets[1 ] =ALIGN (offsets[0 ] + strides[0 ] * height,2 *1024 *1024 ) +4096 ; + + size = offsets[1 ] + strides[1 ] * height /32 ; + + bo =gem_buffer_create_fb_obj (drm_fd, size); +igt_assert (bo); + +if (__kms_addfb (drm_fd, bo, + width, height, + format, modifier, + strides, offsets, +2 , +DRM_MODE_FB_MODIFIERS , &fb_id) !=0 ) { + supported =0 ; +igt_debug ("CCS framebuffer remapping not supported.\n" ); + +return false; + } + +igt_ioctl (drm_fd,DRM_IOCTL_MODE_RMFB , &fb_id); +gem_close (drm_fd, bo); + + supported =1 ; +igt_debug ("CCS framebuffer remapping supported\n" ); + +return true; +} +static uint32_t calc_plane_stride (struct igt_fb *fb,int plane) { uint32_t min_stride = fb->plane_width[plane] *@@ -786,7 +835,7 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane) &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) {/* * The main surface stride must be aligned to the CCS AUX * page table block size (covered by one AUX PTE). This @@ -796,8 +845,13 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)* tile rows. */ tile_align = (min_stride <=8 * tile_width) ?8 :16 ; - else +if (!adlp_ccs_remap_supported (fb->fd)) { + tile_align =roundup_power_of_two (min_stride) /128 ; + tile_align =max (tile_align,8 ); + } + }else { tile_align =4 ; + } }return ALIGN (min_stride, tile_width * tile_align);@@ -848,7 +902,8 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;@@ -870,9 +925,9 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (is_i915_device (fb->fd) && +if (is_ccs_modifier (fb->modifier) &&IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && -is_ccs_modifier (fb->modifier)) + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;Signature · 1 line
2.27.0
Re: [igt-dev] [PATCH i-g-t 6/6] for-ci: Check for ccs remap support
Quoted 17 lines · Zbigniew Kempczyński
Quoted 16 lines · Imre Deak
Remove the power-of-two stride size restriction only if there is a kernel support for this.
Signed-off-by Imre Deak <[email protected]>--- lib/igt_fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 5 deletions(-)lib/igt_fb.c +0
-0@@ -715,6 +715,55 @@ void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, } }
Quoted 15 lines
lib/igt_fb.c void igt_init_fb(struct igt_fb *fb, int fd, int width, int height, · line 729
Quoted 12 lines
lib/igt_fb.c +12
-0+static bool adlp_ccs_remap_supported (int drm_fd) +{ +uint64_t modifier =I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ; +uint64_t size; +uint32_t width =48 *32 ;/* Min stride with remapping to 48->64 tiles */ +uint32_t height =32 *32 ;/* 4 tile aligned height */ +uint32_t format =DRM_FORMAT_XRGB8888 ; +uint32_t strides[4 ] = {}; +uint32_t offsets[4 ] = {}; +uint32_t bo; +uint32_t fb_id; +static int supported =-1 ;Just for making sure - 'supported' is kernel feature or behavior for specific gen? For latter case it shouldn't be cached.
It reflects the presence of the kernel patches removing a constrain on ADL-P for the plane offset and stride of framebuffers using CCS modifiers.
Quoted 93 lines
--
ZbigniewQuoted 89 lines
lib/igt_fb.c +48
-5+ +if (supported !=-1 ) +return supported; + + strides[0 ] = width *4 ; + strides[1 ] =roundup_power_of_two (strides[0 ] /512 ) *64 ; + + offsets[0 ] =0 ; +/* Ensure CCS plane 1 is misaligned. */ + offsets[1 ] =ALIGN (offsets[0 ] + strides[0 ] * height,2 *1024 *1024 ) +4096 ; + + size = offsets[1 ] + strides[1 ] * height /32 ; + + bo =gem_buffer_create_fb_obj (drm_fd, size); +igt_assert (bo); + +if (__kms_addfb (drm_fd, bo, + width, height, + format, modifier, + strides, offsets, +2 , +DRM_MODE_FB_MODIFIERS , &fb_id) !=0 ) { + supported =0 ; +igt_debug ("CCS framebuffer remapping not supported.\n" ); + +return false; + } + +igt_ioctl (drm_fd,DRM_IOCTL_MODE_RMFB , &fb_id); +gem_close (drm_fd, bo); + + supported =1 ; +igt_debug ("CCS framebuffer remapping supported\n" ); + +return true; +} +static uint32_t calc_plane_stride (struct igt_fb *fb,int plane) { uint32_t min_stride = fb->plane_width[plane] *@@ -786,7 +835,7 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane) &tile_width, &tile_height);if (is_gen12_ccs_modifier (fb->modifier)) { -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) {/* * The main surface stride must be aligned to the CCS AUX * page table block size (covered by one AUX PTE). This @@ -796,8 +845,13 @@ static uint32_t calc_plane_stride(struct igt_fb *fb, int plane)* tile rows. */ tile_align = (min_stride <=8 * tile_width) ?8 :16 ; - else +if (!adlp_ccs_remap_supported (fb->fd)) { + tile_align =roundup_power_of_two (min_stride) /128 ; + tile_align =max (tile_align,8 ); + } + }else { tile_align =4 ; + } }return ALIGN (min_stride, tile_width * tile_align);@@ -848,7 +902,8 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd))) +if (IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;@@ -870,9 +925,9 @@ static uint64_t calc_plane_size(struct igt_fb *fb, int plane)* On ADL_P CCS color planes must be 2MB aligned, until remapping * support is added for CCS FBs. */ -if (is_i915_device (fb->fd) && +if (is_ccs_modifier (fb->modifier) &&IS_ALDERLAKE_P (intel_get_drm_devid (fb->fd)) && -is_ccs_modifier (fb->modifier)) + !adlp_ccs_remap_supported (fb->fd)) size =ALIGN (size,2 *1024 *1024 );return size;Signature · 1 line
2.27.0
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for lib/igt_fb: Remove stride, offset restrictions on CCS FBs
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: lib/igt_fb: Remove stride, offset restrictions on CCS FBs
URL : https://patchwork.freedesktop.org/series/94107/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_10530 -> IGTPW_6168
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/index.html
Known issues
------------
Here are the changes found in IGTPW_6168 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@cs-gfx:
- fi-kbl-soraka: NOTRUN -> [SKIP][1] ([fdo#109271]) +8 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/fi-kbl-soraka/igt@amdgpu/[email protected]
* igt@i915_pm_rps@basic-api:
- fi-rkl-guc: [PASS][2] -> [DMESG-WARN][3] ([i915#3925])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/fi-rkl-guc/igt@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/fi-rkl-guc/igt@[email protected]
* igt@runner@aborted:
- fi-rkl-guc: NOTRUN -> [FAIL][4] ([i915#3925])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/fi-rkl-guc/igt@[email protected]
#### Possible fixes ####
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-icl-u2: [DMESG-WARN][5] ([i915#2203] / [i915#2868]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/fi-icl-u2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/fi-icl-u2/igt@[email protected]
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
[i915#2868]: https://gitlab.freedesktop.org/drm/intel/issues/2868
[i915#3925]: https://gitlab.freedesktop.org/drm/intel/issues/3925
Participating hosts (38 -> 33)
------------------------------
Missing (5): fi-ilk-m540 bat-adls-5 fi-bsw-cyan bat-jsl-1 fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_6187 -> IGTPW_6168
CI-20190529: 20190529
CI_DRM_10530: 63bca765c920120bd9746d9093190d82c4ace341 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_6168: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/index.html
IGT_6187: 1afd52c1471dafdf521eae431f3e228826de6de2 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/index.html
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for lib/igt_fb: Remove stride, offset restrictions on CCS FBs
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: lib/igt_fb: Remove stride, offset restrictions on CCS FBs
URL : https://patchwork.freedesktop.org/series/94107/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_10530_full -> IGTPW_6168_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/index.html
Known issues
------------
Here are the changes found in IGTPW_6168_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_create@create-massive:
- shard-snb: NOTRUN -> [DMESG-WARN][1] ([i915#3002]) +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb2/igt@[email protected]
- shard-kbl: NOTRUN -> [DMESG-WARN][2] ([i915#3002])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl3/igt@[email protected]
* igt@gem_ctx_persistence@legacy-engines-mixed:
- shard-snb: NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#1099]) +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb7/igt@[email protected]
* igt@gem_exec_fair@basic-none-solo@rcs0:
- shard-kbl: [PASS][4] -> [FAIL][5] ([i915#2842]) +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl7/igt@gem_exec_fair@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl3/igt@gem_exec_fair@[email protected]
- shard-glk: NOTRUN -> [FAIL][6] ([i915#2842]) +1 similar issue
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk1/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-glk: [PASS][7] -> [FAIL][8] ([i915#2842]) +2 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-glk4/igt@gem_exec_fair@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk6/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace@rcs0:
- shard-iclb: [PASS][9] -> [FAIL][10] ([i915#2842])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb3/igt@gem_exec_fair@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb6/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-iclb: [PASS][11] -> [FAIL][12] ([i915#2849])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb8/igt@gem_exec_fair@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb7/igt@gem_exec_fair@[email protected]
* igt@gem_huc_copy@huc-copy:
- shard-apl: NOTRUN -> [SKIP][13] ([fdo#109271] / [i915#2190])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@[email protected]
* igt@gem_pread@exhaustion:
- shard-glk: NOTRUN -> [WARN][14] ([i915#2658])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk8/igt@[email protected]
* igt@gem_render_copy@yf-tiled-mc-ccs-to-vebox-yf-tiled:
- shard-iclb: NOTRUN -> [SKIP][15] ([i915#768])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb8/igt@[email protected]
* igt@gem_userptr_blits@dmabuf-sync:
- shard-apl: NOTRUN -> [SKIP][16] ([fdo#109271] / [i915#3323])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl3/igt@[email protected]
* igt@gem_userptr_blits@input-checking:
- shard-apl: NOTRUN -> [DMESG-WARN][17] ([i915#3002]) +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl6/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-tglb: NOTRUN -> [FAIL][18] ([i915#454])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@[email protected]
* igt@i915_pm_rpm@gem-mmap-type@fixed:
- shard-glk: NOTRUN -> [SKIP][19] ([fdo#109271] / [i915#3976])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk4/igt@i915_pm_rpm@[email protected]
* igt@kms_big_fb@linear-32bpp-rotate-0:
- shard-glk: [PASS][20] -> [DMESG-WARN][21] ([i915#118] / [i915#95]) +1 similar issue
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-glk8/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk4/igt@[email protected]
* igt@kms_big_fb@x-tiled-64bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][22] ([fdo#110725] / [fdo#111614])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][23] ([fdo#111614])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@[email protected]
* igt@kms_big_fb@x-tiled-max-hw-stride-32bpp-rotate-0-hflip:
- shard-apl: NOTRUN -> [SKIP][24] ([fdo#109271] / [i915#3777]) +1 similar issue
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@[email protected]
* igt@kms_big_fb@x-tiled-max-hw-stride-32bpp-rotate-180-hflip:
- shard-glk: NOTRUN -> [SKIP][25] ([fdo#109271] / [i915#3777])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk3/igt@[email protected]
* igt@kms_big_fb@y-tiled-max-hw-stride-64bpp-rotate-180-hflip:
- shard-kbl: NOTRUN -> [SKIP][26] ([fdo#109271] / [i915#3777]) +1 similar issue
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl3/igt@[email protected]
* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-0:
- shard-apl: NOTRUN -> [SKIP][27] ([fdo#109271]) +234 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@[email protected]
* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-180-hflip-async-flip:
- shard-iclb: NOTRUN -> [SKIP][28] ([fdo#110723])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb5/igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-180-hflip-async-flip.html
* igt@kms_big_joiner@2x-modeset:
- shard-iclb: NOTRUN -> [SKIP][29] ([i915#2705])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb7/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][30] ([i915#2705])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb6/igt@[email protected]
* igt@kms_ccs@pipe-b-bad-pixel-format-y_tiled_ccs:
- shard-snb: NOTRUN -> [SKIP][31] ([fdo#109271]) +380 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb6/igt@kms_ccs@pipe-b-bad-pixel-format-y_tiled_ccs.html
* igt@kms_ccs@pipe-b-crc-primary-rotation-180-y_tiled_gen12_mc_ccs:
- shard-glk: NOTRUN -> [SKIP][32] ([fdo#109271] / [i915#3886]) +6 similar issues
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk9/igt@kms_ccs@pipe-b-crc-primary-rotation-180-y_tiled_gen12_mc_ccs.html
* igt@kms_ccs@pipe-b-crc-sprite-planes-basic-y_tiled_gen12_rc_ccs_cc:
- shard-apl: NOTRUN -> [SKIP][33] ([fdo#109271] / [i915#3886]) +17 similar issues
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@kms_ccs@pipe-b-crc-sprite-planes-basic-y_tiled_gen12_rc_ccs_cc.html
* igt@kms_ccs@pipe-b-random-ccs-data-y_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][34] ([i915#3689]) +1 similar issue
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@kms_ccs@pipe-b-random-ccs-data-y_tiled_ccs.html
* igt@kms_ccs@pipe-b-random-ccs-data-y_tiled_gen12_mc_ccs:
- shard-kbl: NOTRUN -> [SKIP][35] ([fdo#109271] / [i915#3886]) +3 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl7/igt@kms_ccs@pipe-b-random-ccs-data-y_tiled_gen12_mc_ccs.html
* igt@kms_ccs@pipe-c-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc:
- shard-iclb: NOTRUN -> [SKIP][36] ([fdo#109278] / [i915#3886])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb1/igt@kms_ccs@pipe-c-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc.html
* igt@kms_ccs@pipe-d-crc-primary-rotation-180-y_tiled_gen12_mc_ccs:
- shard-glk: NOTRUN -> [SKIP][37] ([fdo#109271]) +129 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk8/igt@kms_ccs@pipe-d-crc-primary-rotation-180-y_tiled_gen12_mc_ccs.html
* igt@kms_chamelium@dp-hpd-with-enabled-mode:
- shard-iclb: NOTRUN -> [SKIP][38] ([fdo#109284] / [fdo#111827]) +2 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb4/igt@[email protected]
* igt@kms_chamelium@hdmi-edid-change-during-suspend:
- shard-apl: NOTRUN -> [SKIP][39] ([fdo#109271] / [fdo#111827]) +22 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl6/igt@[email protected]
* igt@kms_chamelium@hdmi-mode-timings:
- shard-snb: NOTRUN -> [SKIP][40] ([fdo#109271] / [fdo#111827]) +23 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb6/igt@[email protected]
* igt@kms_color_chamelium@pipe-a-ctm-0-75:
- shard-kbl: NOTRUN -> [SKIP][41] ([fdo#109271] / [fdo#111827]) +12 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][42] ([fdo#109284] / [fdo#111827]) +3 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb1/igt@[email protected]
* igt@kms_color_chamelium@pipe-b-ctm-0-5:
- shard-glk: NOTRUN -> [SKIP][43] ([fdo#109271] / [fdo#111827]) +13 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk3/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-128x128-offscreen:
- shard-iclb: [PASS][44] -> [DMESG-FAIL][45] ([i915#1226])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb1/igt@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb2/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-32x32-onscreen:
- shard-tglb: NOTRUN -> [SKIP][46] ([i915#3319])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb1/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-512x512-sliding:
- shard-iclb: NOTRUN -> [SKIP][47] ([fdo#109278] / [fdo#109279]) +1 similar issue
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb6/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-32x10-random:
- shard-tglb: NOTRUN -> [SKIP][48] ([i915#3359]) +4 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-512x512-onscreen:
- shard-tglb: NOTRUN -> [SKIP][49] ([fdo#109279] / [i915#3359]) +3 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@[email protected]
* igt@kms_cursor_legacy@pipe-d-single-move:
- shard-iclb: NOTRUN -> [SKIP][50] ([fdo#109278]) +9 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb1/igt@[email protected]
* igt@kms_flip@2x-nonexisting-fb-interruptible:
- shard-iclb: NOTRUN -> [SKIP][51] ([fdo#109274])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb6/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank@a-dp1:
- shard-kbl: [PASS][52] -> [FAIL][53] ([i915#79])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl3/igt@kms_flip@[email protected]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl1/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-expired-vblank@a-hdmi-a1:
- shard-glk: NOTRUN -> [FAIL][54] ([i915#79])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk3/igt@kms_flip@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@b-vga1:
- shard-snb: NOTRUN -> [DMESG-WARN][55] ([i915#3305])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb2/igt@kms_flip@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][56] ([fdo#109271] / [i915#2672])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl1/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-cur-indfb-draw-blt:
- shard-kbl: NOTRUN -> [SKIP][57] ([fdo#109271]) +121 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl2/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-shrfb-fliptrack-mmap-gtt:
- shard-iclb: NOTRUN -> [SKIP][58] ([fdo#109280]) +7 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-kbl: [PASS][59] -> [DMESG-WARN][60] ([i915#180]) +2 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl3/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl7/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-2p-primscrn-indfb-pgflip-blt:
- shard-tglb: NOTRUN -> [SKIP][61] ([fdo#111825]) +10 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb1/igt@[email protected]
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-d-frame-sequence:
- shard-glk: NOTRUN -> [SKIP][62] ([fdo#109271] / [i915#533])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk4/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-alpha-7efc:
- shard-apl: NOTRUN -> [FAIL][63] ([fdo#108145] / [i915#265]) +2 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-glk: NOTRUN -> [FAIL][64] ([fdo#108145] / [i915#265])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk7/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-alpha-transparent-fb:
- shard-apl: NOTRUN -> [FAIL][65] ([i915#265])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl6/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
- shard-kbl: NOTRUN -> [FAIL][66] ([fdo#108145] / [i915#265])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl7/igt@[email protected]
* igt@kms_plane_lowres@pipe-b-tiling-x:
- shard-iclb: NOTRUN -> [SKIP][67] ([i915#3536]) +1 similar issue
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb7/igt@[email protected]
* igt@kms_plane_lowres@pipe-c-tiling-x:
- shard-tglb: NOTRUN -> [SKIP][68] ([i915#3536]) +1 similar issue
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@[email protected]
* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-4:
- shard-apl: NOTRUN -> [SKIP][69] ([fdo#109271] / [i915#658]) +4 similar issues
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl8/igt@[email protected]
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1:
- shard-iclb: NOTRUN -> [SKIP][70] ([i915#658])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb7/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][71] ([fdo#109271] / [i915#658]) +1 similar issue
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk7/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][72] ([fdo#109271] / [i915#658]) +3 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl2/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][73] ([i915#2920])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb8/igt@[email protected]
* igt@kms_psr2_su@page_flip:
- shard-iclb: [PASS][74] -> [SKIP][75] ([fdo#109642] / [fdo#111068] / [i915#658])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb2/igt@kms_psr2_su@page_flip.html
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb3/igt@kms_psr2_su@page_flip.html
* igt@kms_psr@psr2_sprite_blt:
- shard-iclb: [PASS][76] -> [SKIP][77] ([fdo#109441]) +1 similar issue
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb2/igt@kms_psr@psr2_sprite_blt.html
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb3/igt@kms_psr@psr2_sprite_blt.html
* igt@kms_rotation_crc@primary-yf-tiled-reflect-x-0:
- shard-tglb: NOTRUN -> [SKIP][78] ([fdo#111615]) +3 similar issues
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb8/igt@[email protected]
* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][79] ([IGT#2])
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@kms_sysfs_edid_timing.html
- shard-kbl: NOTRUN -> [FAIL][80] ([IGT#2])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl4/igt@kms_sysfs_edid_timing.html
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [PASS][81] -> [DMESG-WARN][82] ([i915#180] / [i915#295])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl4/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl1/igt@[email protected]
* igt@kms_vblank@pipe-d-wait-idle:
- shard-apl: NOTRUN -> [SKIP][83] ([fdo#109271] / [i915#533]) +2 similar issues
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl1/igt@[email protected]
* igt@kms_writeback@writeback-check-output:
- shard-kbl: NOTRUN -> [SKIP][84] ([fdo#109271] / [i915#2437])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl4/igt@[email protected]
* igt@kms_writeback@writeback-invalid-parameters:
- shard-apl: NOTRUN -> [SKIP][85] ([fdo#109271] / [i915#2437])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl7/igt@[email protected]
* igt@nouveau_crc@pipe-b-ctx-flip-detection:
- shard-tglb: NOTRUN -> [SKIP][86] ([i915#2530])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb1/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][87] ([i915#2530])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb2/igt@[email protected]
* igt@perf@mi-rpc:
- shard-tglb: NOTRUN -> [SKIP][88] ([fdo#109289])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb5/igt@[email protected]
* igt@runner@aborted:
- shard-snb: NOTRUN -> ([FAIL][89], [FAIL][90]) ([i915#3002])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb5/igt@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-snb2/igt@[email protected]
* igt@sysfs_clients@create:
- shard-apl: NOTRUN -> [SKIP][91] ([fdo#109271] / [i915#2994]) +2 similar issues
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl2/igt@[email protected]
* igt@sysfs_clients@fair-1:
- shard-glk: NOTRUN -> [SKIP][92] ([fdo#109271] / [i915#2994]) +1 similar issue
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk3/igt@[email protected]
* igt@sysfs_clients@recycle:
- shard-kbl: NOTRUN -> [SKIP][93] ([fdo#109271] / [i915#2994]) +1 similar issue
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl2/igt@[email protected]
#### Possible fixes ####
* igt@gem_eio@unwedge-stress:
- shard-iclb: [TIMEOUT][94] ([i915#2369] / [i915#2481] / [i915#3070]) -> [PASS][95]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb1/igt@[email protected]
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb1/igt@[email protected]
* igt@gem_exec_fair@basic-none@vecs0:
- shard-kbl: [FAIL][96] ([i915#2842]) -> [PASS][97]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl7/igt@gem_exec_fair@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl2/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [FAIL][98] ([i915#2842]) -> [PASS][99]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-glk1/igt@gem_exec_fair@[email protected]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk7/igt@gem_exec_fair@[email protected]
* igt@gem_mmap_gtt@cpuset-big-copy-xy:
- shard-iclb: [FAIL][100] ([i915#307]) -> [PASS][101]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb4/igt@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb6/igt@[email protected]
* igt@gem_workarounds@suspend-resume-context:
- shard-apl: [DMESG-WARN][102] ([i915#180]) -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-apl2/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl8/igt@[email protected]
* igt@gen9_exec_parse@allowed-all:
- shard-glk: [DMESG-WARN][104] ([i915#1436] / [i915#716]) -> [PASS][105]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-glk1/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-glk9/igt@[email protected]
* igt@kms_fbcon_fbt@fbc-suspend:
- shard-kbl: [INCOMPLETE][106] ([i915#155] / [i915#180] / [i915#636]) -> [PASS][107]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl7/igt@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl7/igt@[email protected]
* igt@kms_psr@psr2_cursor_blt:
- shard-iclb: [SKIP][108] ([fdo#109441]) -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb8/igt@kms_psr@psr2_cursor_blt.html
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb2/igt@kms_psr@psr2_cursor_blt.html
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-kbl: [DMESG-WARN][110] ([i915#180]) -> [PASS][111] +1 similar issue
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl4/igt@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl3/igt@[email protected]
#### Warnings ####
* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-1:
- shard-iclb: [SKIP][112] ([i915#2920]) -> [SKIP][113] ([i915#658])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb2/igt@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb6/igt@[email protected]
* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-4:
- shard-iclb: [SKIP][114] ([i915#658]) -> [SKIP][115] ([i915#2920]) +2 similar issues
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-iclb5/igt@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-iclb2/igt@[email protected]
* igt@runner@aborted:
- shard-kbl: ([FAIL][116], [FAIL][117], [FAIL][118], [FAIL][119], [FAIL][120]) ([i915#180] / [i915#1814] / [i915#3002] / [i915#3363] / [i915#602] / [i915#92]) -> ([FAIL][121], [FAIL][122], [FAIL][123], [FAIL][124], [FAIL][125], [FAIL][126]) ([fdo#109271] / [i915#180] / [i915#1814] / [i915#3002] / [i915#3363] / [i915#602])
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl7/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl4/igt@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl6/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl4/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-kbl1/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl1/igt@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl1/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl1/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl1/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl7/igt@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-kbl3/igt@[email protected]
- shard-apl: ([FAIL][127], [FAIL][128]) ([fdo#109271] / [i915#180] / [i915#1814] / [i915#3363]) -> ([FAIL][129], [FAIL][130]) ([i915#3002] / [i915#3363])
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-apl2/igt@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-apl6/igt@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl1/igt@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-apl6/igt@[email protected]
- shard-tglb: ([FAIL][131], [FAIL][132]) ([i915#3002]) -> ([FAIL][133], [FAIL][134]) ([i915#1887] / [i915#3002])
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-tglb5/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10530/shard-tglb5/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb5/igt@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/shard-tglb3/igt@[email protected]
[IGT#2]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/2
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#110725]: https://bugs.freedesktop.org/show_bug.cgi?id=110725
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1226]: https://gitlab.freedesktop.org/drm/intel/issues/1226
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1814]: https://gitlab.freedesktop.org/drm/intel/issues/1814
[i915#1887]: https://gitlab.freedesktop.org/drm/intel/issues/1887
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2369]: https://gitlab.freedesktop.org/drm/intel/issues/2369
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2481]
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6168/index.html