brcmfmac: Add WPA3 Personal with FT to supported cipher suites
PATCH v2 1/1 brcmfmac: Add WPA3 Personal with FT to supported cipher suites
This allows the driver to connect to BSSIDs supporting SAE with 802.11r. Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2. AP was set to 'sae-mixed' (WPA2/3 Personal).
Signed-off-by Paweł Drewniak <[email protected]>
---
Changes in v2:
- rebase on top of wireless-drivers-next
--- .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +8 -0
@@ -1829,6 +1829,14 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) profile->use_fwsup =BRCMF_PROFILE_FWSUP_SAE ; }break ; +case WLAN_AKM_SUITE_FT_OVER_SAE : + val =WPA3_AUTH_SAE_PSK |WPA2_AUTH_FT ; + profile->is_ft = true; +if (sme->crypto.sae_pwd) { +brcmf_dbg (INFO ,"using SAE offload\n" ); + profile->use_fwsup =BRCMF_PROFILE_FWSUP_SAE ; + } +break ;default :bphy_err (drvr,"invalid cipher group (%d)\n" , sme->crypto.cipher_group);
Signature · 1 line
2.30.2
Quoted 5 lines · Paweł Drewniak
This allows the driver to connect to BSSIDs supporting SAE with 802.11r. Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2. AP was set to 'sae-mixed' (WPA2/3 Personal).
Signed-off-by Paweł Drewniak <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
4b51de063d53 brcmfmac: Add WPA3 Personal with FT to supported cipher suites
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches