arm64: dts: rockchip: add isp node for px30
Subsystems (2)
Heiko Stuebner
maintainerPATCH 1/2 arm64: dts: rockchip: add isp node for px30
From: Heiko Stuebner <[email protected]>
Add the rkisp1 node and iommu for the px30 soc.
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm64/boot/dts/rockchip/px30.dtsi | 41 ++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
arch/arm64/boot/dts/rockchip/px30.dtsi +41 -0
@@ -1189,6 +1189,47 @@ vopl_mmu: iommu@ff470f00 { status = "disabled"; }; + isp: isp@ff4a0000 { + compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/ + reg = <0x0 0xff4a0000 0x0 0x8000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "isp", "mi", "mipi"; + clocks = <&cru SCLK_ISP>, + <&cru ACLK_ISP>, + <&cru HCLK_ISP>, + <&cru PCLK_ISP>; + clock-names = "isp", "aclk", "hclk", "pclk"; + iommus = <&isp_mmu>; + phys = <&csi_dphy>; + phy-names = "dphy"; + power-domains = <&power PX30_PD_VI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + isp_mmu: iommu@ff4a8000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff4a8000 0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; + clock-names = "aclk", "iface"; + power-domains = <&power PX30_PD_VI>; + rockchip,disable-mmu-reset; + #iommu-cells = <0>; + }; + qos_gmac: qos@ff518000 { compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff518000 0x0 0x20>;
Signature · 7 lines
2.29.2 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Heiko Stuebner
maintainerPATCH 2/2 arm64: dts: rockchip: hook up camera on px30-evb
From: Heiko Stuebner <[email protected]>
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm64/boot/dts/rockchip/px30-evb.dts | 52 +++++++++++++++++++++++ 1 file changed, 52 insertions(+)
arch/arm64/boot/dts/rockchip/px30-evb.dts +52 -0
@@ -114,6 +114,10 @@ &cpu3 { cpu-supply = <&vdd_arm>; }; +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; };
@@ -428,6 +432,36 @@ sensor@4c { }; }; +&i2c2 { + status = "okay"; + + clock-frequency = <100000>; + + /* These are relatively safe rise/fall times; TODO: measure */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + ov5695: ov5695@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + avdd-supply = <&vcc2v8_dvp>; + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + dvdd-supply = <&vcc1v5_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + }; + }; + }; +}; + &i2s1_2ch { status = "okay"; };
@@ -443,6 +477,24 @@ &io_domains { vccio6-supply = <&vccio_flash>; }; +&isp { + status = "okay"; + + ports { + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; + +&isp_mmu { + status = "okay"; +}; + &pinctrl { headphone { hp_det: hp-det {
Signature · 1 line
2.29.2
Heiko Stübner
maintainerRe: [PATCH 2/2] arm64: dts: rockchip: hook up camera on px30-evb
Am Montag, 30. August 2021, 16:13:18 CEST schrieb Heiko Stuebner:
Quoted 1 line
From: Heiko Stuebner <[email protected]>
Note to self: missing patch description, make it something like:
Enable the isp and csi phy on px30-evb and connect it to the board's ov5695 camera.
Quoted 83 lines
Signed-off-by Heiko Stuebner <[email protected]>--- arch/arm64/boot/dts/rockchip/px30-evb.dts | 52 +++++++++++++++++++++++ 1 file changed, 52 insertions(+)arch/arm64/boot/dts/rockchip/px30-evb.dts +52
-0@@ -114,6 +114,10 @@ &cpu3 { cpu-supply = <&vdd_arm>; }; +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; };@@ -428,6 +432,36 @@ sensor@4c { }; }; +&i2c2 { + status = "okay"; + + clock-frequency = <100000>; + + /* These are relatively safe rise/fall times; TODO: measure */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + ov5695: ov5695@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + avdd-supply = <&vcc2v8_dvp>; + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + dvdd-supply = <&vcc1v5_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + }; + }; + }; +}; + &i2s1_2ch { status = "okay"; };@@ -443,6 +477,24 @@ &io_domains { vccio6-supply = <&vccio_flash>; }; +&isp { + status = "okay"; + + ports { + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; + +&isp_mmu { + status = "okay"; +}; + &pinctrl { headphone { hp_det: hp-det {
Quoted 1 line · Heiko Stuebner
Add the rkisp1 node and iommu for the px30 soc.
Applied, thanks!
[1/2] arm64: dts: rockchip: add isp node for px30
commit: 8df7b4537dfb4c0a2a42de603927f5818cee0274
[2/2] arm64: dts: rockchip: hook up camera on px30-evb
commit: 474a77395be201c80925efb7a0425fb28b0ba60bBest regards,
Signature · 1 line
Heiko Stuebner <[email protected]>