4.19.206-rc1 review

This is the start of the stable review cycle for the 4.19.206 release. There are 33 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.206-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.206-rc1

Peter Collingbourne <[email protected]>
net: don't unconditionally copy_from_user a struct ifreq for socket ioctls

Denis Efremov <[email protected]>
Revert "floppy: reintroduce O_NDELAY fix"

Sean Christopherson <[email protected]>
KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs

George Kennedy <[email protected]>
fbmem: add margin check to fb_check_caps()

Linus Torvalds <[email protected]>
vt_kdsetmode: extend console locking

Gerd Rausch <[email protected]>
net/rds: dma_map_sg is entitled to merge entries

Ben Skeggs <[email protected]>
drm/nouveau/disp: power down unused DP links during init

Mark Yacoub <[email protected]>
drm: Copy drm_wait_vblank to user before returning

Shai Malin <[email protected]>
qed: Fix null-pointer dereference in qed_rdma_create_qp()

Shai Malin <[email protected]>
qed: qed ll2 race condition fixes

Neeraj Upadhyay <[email protected]>

    vringh: Use wiov->used to check for read/write desc order

Parav Pandit <[email protected]>
virtio_pci: Support surprise removal of virtio pci device

Parav Pandit <[email protected]>

    virtio: Improve vq->broken access to avoid any compiler optimization

Michał Mirosław <[email protected]>
opp: remove WARN when no valid OPPs remain

Jerome Brunet <[email protected]>
usb: gadget: u_audio: fix race condition on endpoint stop

Guangbin Huang <[email protected]>
net: hns3: fix get wrong pfc_en when query PFC configuration

Maxim Kiselev <[email protected]>
net: marvell: fix MVNETA_TX_IN_PRGRS bit number

Christophe JAILLET <[email protected]>
xgene-v2: Fix a resource leak in the error handling path of 'xge_probe()'

Shreyansh Chouhan <[email protected]>
ip_gre: add validation for csum_start

Sasha Neftin <[email protected]>
e1000e: Fix the max snoop/no-snoop latency for 10M

Tuo Li <[email protected]>
IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()

Wesley Cheng <[email protected]>
usb: dwc3: gadget: Stop EP0 transfers during pullup disable

Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Fix dwc3_calc_trbs_left()

Zhengjun Zhang <[email protected]>
USB: serial: option: add new VID/PID to support Fibocom FG150

Johan Hovold <[email protected]>
Revert "USB: serial: ch341: fix character loss at high transfer rates"

Stefan Mätje <[email protected]>
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters

Kefeng Wang <[email protected]>
once: Fix panic when module unload

Florian Westphal <[email protected]>
netfilter: conntrack: collect all entries in one cycle

Guenter Roeck <[email protected]>
ARC: Fix CONFIG_STACKDEPOT

Daniel Borkmann <[email protected]>
bpf: Fix truncation handling for mod32 dst reg wrt zero

Daniel Borkmann <[email protected]>
bpf: Fix 32 bit src register truncation on div/mod

Daniel Borkmann <[email protected]>
bpf: Do not use ax register in interpreter on div/mod

Xiaolong Huang <[email protected]>
net: qrtr: fix another OOB Read in qrtr_endpoint_post

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arc/kernel/vmlinux.lds.S                      |  2 +
 arch/x86/kvm/mmu.c                                 | 11 +++-
 drivers/block/floppy.c                             | 27 ++++----
 drivers/gpu/drm/drm_ioc32.c                        |  4 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c      |  2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h      |  1 +
 drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c    |  9 +++
 drivers/infiniband/hw/hfi1/sdma.c                  |  9 ++-
 drivers/net/can/usb/esd_usb2.c                     |  4 +-
 drivers/net/ethernet/apm/xgene-v2/main.c           |  4 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 13 +---
 drivers/net/ethernet/intel/e1000e/ich8lan.c        | 14 ++++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h        |  3 +
 drivers/net/ethernet/marvell/mvneta.c              |  2 +-
 drivers/net/ethernet/qlogic/qed/qed_ll2.c          | 20 ++++++
 drivers/net/ethernet/qlogic/qed/qed_rdma.c         |  3 +-
 drivers/opp/of.c                                   |  5 +-
 drivers/tty/vt/vt_ioctl.c                          | 11 ++--
 drivers/usb/dwc3/gadget.c                          | 23 ++++---
 drivers/usb/gadget/function/u_audio.c              |  5 +-
 drivers/usb/serial/ch341.c                         |  1 -
 drivers/usb/serial/option.c                        |  2 +
 drivers/vhost/vringh.c                             |  2 +-
 drivers/video/fbdev/core/fbmem.c                   |  4 ++
 drivers/virtio/virtio_pci_common.c                 |  7 +++
 drivers/virtio/virtio_ring.c                       |  6 +-
 include/linux/filter.h                             | 24 ++++++++
 include/linux/netdevice.h                          |  4 ++
 include/linux/once.h                               |  4 +-
 kernel/bpf/core.c                                  | 32 +++++-----
 kernel/bpf/verifier.c                              | 27 ++++----
 lib/once.c                                         | 11 +++-
 net/ipv4/ip_gre.c                                  |  2 +
 net/netfilter/nf_conntrack_core.c                  | 71 +++++++---------------
 net/qrtr/qrtr.c                                    |  2 +-
 net/rds/ib_frmr.c                                  |  4 +-
 net/socket.c                                       |  6 +-
 38 files changed, 228 insertions(+), 157 deletions(-)

From: Xiaolong Huang <[email protected]>

commit 7e78c597c3ebfd0cb329aa09a838734147e4f117 upstream.

This check was incomplete, did not consider size is 0:

	if (len != ALIGN(size, 4) + hdrlen)
                    goto err;

if size from qrtr_hdr is 0, the result of ALIGN(size, 4) will be 0, In case of len == hdrlen and size == 0 in header this check won't fail and

	if (cb->type == QRTR_TYPE_NEW_SERVER) {
                /* Remote node endpoint can bridge other distant nodes */
                const struct qrtr_ctrl_pkt *pkt = data + hdrlen;

                qrtr_node_assign(node, le32_to_cpu(pkt->server.node));
        }

will also read out of bound from data, which is hdrlen allocated block.

---
 net/qrtr/qrtr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -321,7 +321,7 @@ int qrtr_endpoint_post(struct qrtr_endpo
 		goto err;
 	}
 
-	if (len != ALIGN(size, 4) + hdrlen)
+	if (!size || len != ALIGN(size, 4) + hdrlen)
 		goto err;
 
 	if (cb->dst_port != QRTR_PORT_CTRL && cb->type != QRTR_TYPE_DATA)

From: Daniel Borkmann <[email protected]>

Partially undo old commit 144cd91c4c2b ("bpf: move tmp variable into ax register in interpreter"). The reason we need this here is because ax register will be used for holding temporary state for div/mod instruction which otherwise interpreter would corrupt. This will cause a small +8 byte stack increase for interpreter, but with the gain that we can use it from verifier rewrites as scratch register.

[cascardo: This partial revert is needed in order to support using AX for the following two commits, as there is no JMP32 on 4.19.y]

---
 kernel/bpf/core.c |   32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

@@ -705,9 +705,6 @@ static int bpf_jit_blind_insn(const stru
 	 * below.
 	 *
 	 * Constant blinding is only used by JITs, not in the interpreter.
-	 * The interpreter uses AX in some occasions as a local temporary
-	 * register e.g. in DIV or MOD instructions.
-	 *
 	 * In restricted circumstances, the verifier can also use the AX
 	 * register for rewrites as long as they do not interfere with
 	 * the above cases!

@@ -1057,6 +1054,7 @@ static u64 ___bpf_prog_run(u64 *regs, co
 #undef BPF_INSN_3_LBL
 #undef BPF_INSN_2_LBL
 	u32 tail_call_cnt = 0;
+	u64 tmp;
 
 #define CONT	 ({ insn++; goto select_insn; })
 #define CONT_JMP ({ insn++; goto select_insn; })

@@ -1117,36 +1115,36 @@ select_insn:
 		(*(s64 *) &DST) >>= IMM;
 		CONT;
 	ALU64_MOD_X:
-		div64_u64_rem(DST, SRC, &AX);
-		DST = AX;
+		div64_u64_rem(DST, SRC, &tmp);
+		DST = tmp;
 		CONT;
 	ALU_MOD_X:
-		AX = (u32) DST;
-		DST = do_div(AX, (u32) SRC);
+		tmp = (u32) DST;
+		DST = do_div(tmp, (u32) SRC);
 		CONT;
 	ALU64_MOD_K:
-		div64_u64_rem(DST, IMM, &AX);
-		DST = AX;
+		div64_u64_rem(DST, IMM, &tmp);
+		DST = tmp;
 		CONT;
 	ALU_MOD_K:
-		AX = (u32) DST;
-		DST = do_div(AX, (u32) IMM);
+		tmp = (u32) DST;
+		DST = do_div(tmp, (u32) IMM);
 		CONT;
 	ALU64_DIV_X:
 		DST = div64_u64(DST, SRC);
 		CONT;
 	ALU_DIV_X:
-		AX = (u32) DST;
-		do_div(AX, (u32) SRC);
-		DST = (u32) AX;
+		tmp = (u32) DST;
+		do_div(tmp, (u32) SRC);
+		DST = (u32) tmp;
 		CONT;
 	ALU64_DIV_K:
 		DST = div64_u64(DST, IMM);
 		CONT;
 	ALU_DIV_K:
-		AX = (u32) DST;
-		do_div(AX, (u32) IMM);
-		DST = (u32) AX;
+		tmp = (u32) DST;
+		do_div(tmp, (u32) IMM);
+		DST = (u32) tmp;
 		CONT;
 	ALU_END_TO_BE:
 		switch (IMM) {

From: Daniel Borkmann <[email protected]>

Commit e88b2c6e5a4d9ce30d75391e4d950da74bb2bd90 upstream.

While reviewing a different fix, John and I noticed an oddity in one of the BPF program dumps that stood out, for example:

  # bpftool p d x i 13
   0: (b7) r0 = 808464450
   1: (b4) w4 = 808464432
   2: (bc) w0 = w0
   3: (15) if r0 == 0x0 goto pc+1
   4: (9c) w4 %= w0
  [...]

In line 2 we noticed that the mov32 would 32 bit truncate the original src register for the div/mod operation. While for the two operations the dst register is typically marked unknown e.g. from adjust_scalar_min_max_vals() the src register is not, and thus verifier keeps tracking original bounds, simplified:

0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = -1
1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b7) r1 = -1
2: R0_w=invP-1 R1_w=invP-1 R10=fp0
2: (3c) w0 /= w1
3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0 3: (77) r1 >>= 32
4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0 4: (bf) r0 = r1
5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0
5: (95) exit
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0

Runtime result of r0 at exit is 0 instead of expected -1. Remove the verifier mov32 src rewrite in div/mod and replace it with a jmp32 test instead. After the fix, we result in the following code generation when having dividend r1 and divisor r6:

div, 64 bit: div, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (55) if r6 != 0x0 goto pc+2           2: (56) if w6 != 0x0 goto pc+2
   3: (ac) w1 ^= w1                         3: (ac) w1 ^= w1
   4: (05) goto pc+1                        4: (05) goto pc+1
   5: (3f) r1 /= r6                         5: (3c) w1 /= w6
   6: (b7) r0 = 0                           6: (b7) r0 = 0
   7: (95) exit                             7: (95) exit

mod, 64 bit: mod, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (15) if r6 == 0x0 goto pc+1           2: (16) if w6 == 0x0 goto pc+1
   3: (9f) r1 %= r6                         3: (9c) w1 %= w6
   4: (b7) r0 = 0                           4: (b7) r0 = 0
   5: (95) exit                             5: (95) exit

x86 in particular can throw a 'divide error' exception for div instruction not only for divisor being zero, but also for the case when the quotient is too large for the designated register. For the edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT since we always zero edx (rdx). Hence really the only protection needed is against divisor being zero.

[Salvatore Bonaccorso: This is an earlier version of the patch provided by Daniel Borkmann which does not rely on availability of the BPF_JMP32 instruction class. This means it is not even strictly a backport of the upstream commit mentioned but based on Daniel's and John's work to address the issue.]

---
 include/linux/filter.h |   24 ++++++++++++++++++++++++
 kernel/bpf/verifier.c  |   22 +++++++++++-----------
 2 files changed, 35 insertions(+), 11 deletions(-)

@@ -77,6 +77,14 @@ struct sock_reuseport;
 
 /* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */
 
+#define BPF_ALU_REG(CLASS, OP, DST, SRC)			\
+	((struct bpf_insn) {					\
+		.code  = CLASS | BPF_OP(OP) | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
 #define BPF_ALU64_REG(OP, DST, SRC)				\
 	((struct bpf_insn) {					\
 		.code  = BPF_ALU64 | BPF_OP(OP) | BPF_X,	\

@@ -123,6 +131,14 @@ struct sock_reuseport;
 
 /* Short form of mov, dst_reg = src_reg */
 
+#define BPF_MOV_REG(CLASS, DST, SRC)				\
+	((struct bpf_insn) {					\
+		.code  = CLASS | BPF_MOV | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
 #define BPF_MOV64_REG(DST, SRC)					\
 	((struct bpf_insn) {					\
 		.code  = BPF_ALU64 | BPF_MOV | BPF_X,		\

@@ -157,6 +173,14 @@ struct sock_reuseport;
 		.off   = 0,					\
 		.imm   = IMM })
 
+#define BPF_RAW_REG(insn, DST, SRC)				\
+	((struct bpf_insn) {					\
+		.code  = (insn).code,				\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = (insn).off,				\
+		.imm   = (insn).imm })
+
 /* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
 #define BPF_LD_IMM64(DST, IMM)					\
 	BPF_LD_IMM64_RAW(DST, 0, IMM)

@@ -6177,28 +6177,28 @@ static int fixup_bpf_calls(struct bpf_ve
 		    insn->code == (BPF_ALU | BPF_DIV | BPF_X)) {
 			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
 			struct bpf_insn mask_and_div[] = {
-				BPF_MOV32_REG(insn->src_reg, insn->src_reg),
+				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
 				/* Rx div 0 -> 0 */
-				BPF_JMP_IMM(BPF_JNE, insn->src_reg, 0, 2),
-				BPF_ALU32_REG(BPF_XOR, insn->dst_reg, insn->dst_reg),
+				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 2),
+				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
 				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
-				*insn,
+				BPF_ALU_REG(BPF_CLASS(insn->code), BPF_XOR, insn->dst_reg, insn->dst_reg),
 			};
 			struct bpf_insn mask_and_mod[] = {
-				BPF_MOV32_REG(insn->src_reg, insn->src_reg),
+				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
 				/* Rx mod 0 -> Rx */
-				BPF_JMP_IMM(BPF_JEQ, insn->src_reg, 0, 1),
-				*insn,
+				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 1),
+				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
 			};
 			struct bpf_insn *patchlet;
 
 			if (insn->code == (BPF_ALU64 | BPF_DIV | BPF_X) ||
 			    insn->code == (BPF_ALU | BPF_DIV | BPF_X)) {
-				patchlet = mask_and_div + (is64 ? 1 : 0);
-				cnt = ARRAY_SIZE(mask_and_div) - (is64 ? 1 : 0);
+				patchlet = mask_and_div;
+				cnt = ARRAY_SIZE(mask_and_div);
 			} else {
-				patchlet = mask_and_mod + (is64 ? 1 : 0);
-				cnt = ARRAY_SIZE(mask_and_mod) - (is64 ? 1 : 0);
+				patchlet = mask_and_mod;
+				cnt = ARRAY_SIZE(mask_and_mod);
 			}
 
 			new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);

From: Daniel Borkmann <[email protected]>

Commit 9b00f1b78809309163dda2d044d9e94a3c0248a3 upstream.

Recently noticed that when mod32 with a known src reg of 0 is performed, then the dst register is 32-bit truncated in verifier:

0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 0
1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b7) r1 = -1
2: R0_w=inv0 R1_w=inv-1 R10=fp0
2: (b4) w2 = -1
3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
3: (9c) w1 %= w0
4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 4: (b7) r0 = 1
5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 5: (1d) if r1 == r2 goto pc+1
R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 6: (b7) r0 = 2
7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 7: (95) exit
7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0 7: (95) exit

However, as a runtime result, we get 2 instead of 1, meaning the dst register does not contain (u32)-1 in this case. The reason is fairly straight forward given the 0 test leaves the dst register as-is:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+1
   4: (9c) w1 %= w0
   5: (b7) r0 = 1
   6: (1d) if r1 == r2 goto pc+1
   7: (b7) r0 = 2
   8: (95) exit

This was originally not an issue given the dst register was marked as completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification") the verifier casts the register output to 32 bit, and hence it becomes 32 bit unknown. Note that for the case where the src register is unknown, the dst register is marked 64 bit unknown. After the fix, the register is truncated by the runtime and the test passes:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+2
   4: (9c) w1 %= w0
   5: (05) goto pc+1
   6: (bc) w1 = w1
   7: (b7) r0 = 1
   8: (1d) if r1 == r2 goto pc+1
   9: (b7) r0 = 2
  10: (95) exit

Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:

mod32: mod64:

(16) if w0 == 0x0 goto pc+2 (15) if r0 == 0x0 goto pc+1
(9c) w1 %= w0 (9f) r1 %= r0
(05) goto pc+1
(bc) w1 = w1

[Salvatore Bonaccorso: This is an earlier version based on work by Daniel and John which does not rely on availability of the BPF_JMP32 instruction class. This means it is not even strictly a backport of the upstream commit mentioned but based on Daniel's and John's work to address the issue and was finalized by Thadeu Lima de Souza Cascardo.]

---
 kernel/bpf/verifier.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

@@ -6178,7 +6178,7 @@ static int fixup_bpf_calls(struct bpf_ve
 			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
 			struct bpf_insn mask_and_div[] = {
 				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
-				/* Rx div 0 -> 0 */
+				/* [R,W]x div 0 -> 0 */
 				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 2),
 				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
 				BPF_JMP_IMM(BPF_JA, 0, 0, 1),

@@ -6186,9 +6186,10 @@ static int fixup_bpf_calls(struct bpf_ve
 			};
 			struct bpf_insn mask_and_mod[] = {
 				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
-				/* Rx mod 0 -> Rx */
-				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 1),
+				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 1 + (is64 ? 0 : 1)),
 				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
+				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+				BPF_MOV32_REG(insn->dst_reg, insn->dst_reg),
 			};
 			struct bpf_insn *patchlet;
 

@@ -6198,7 +6199,7 @@ static int fixup_bpf_calls(struct bpf_ve
 				cnt = ARRAY_SIZE(mask_and_div);
 			} else {
 				patchlet = mask_and_mod;
-				cnt = ARRAY_SIZE(mask_and_mod);
+				cnt = ARRAY_SIZE(mask_and_mod) - (is64 ? 2 : 0);
 			}
 
 			new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);

From: Guenter Roeck <[email protected]>

[ Upstream commit bf79167fd86f3b97390fe2e70231d383526bd9cc ]

Enabling CONFIG_STACKDEPOT results in the following build error.

arc-elf-ld: lib/stackdepot.o: in function `filter_irq_stacks':
stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'

Other architectures address this problem by adding IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to the text segment, so do the same here.

---
 arch/arc/kernel/vmlinux.lds.S | 2 ++
 1 file changed, 2 insertions(+)

index f35ed578e007..4d823d3f65bb 100644
@@ -92,6 +92,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}

2.30.2

From: Florian Westphal <[email protected]>

[ Upstream commit 4608fdfc07e116f9fc0895beb40abad7cdb5ee3d ]

Michal Kubecek reports that conntrack gc is responsible for frequent wakeups (every 125ms) on idle systems.

On busy systems, timed out entries are evicted during lookup. The gc worker is only needed to remove entries after system becomes idle after a busy period.

To resolve this, always scan the entire table.
If the scan is taking too long, reschedule so other work_structs can run and resume from next bucket.

After a completed scan, wait for 2 minutes before the next cycle. Heuristics for faster re-schedule are removed.

GC_SCAN_INTERVAL could be exposed as a sysctl in the future to allow tuning this as-needed or even turn the gc worker off.

---
 net/netfilter/nf_conntrack_core.c | 71 ++++++++++---------------------
 1 file changed, 22 insertions(+), 49 deletions(-)

index c5590d36b775..a38caf317dbb 100644
@@ -70,10 +70,9 @@ EXPORT_SYMBOL_GPL(nf_conntrack_hash);
 
 struct conntrack_gc_work {
 	struct delayed_work	dwork;
-	u32			last_bucket;
+	u32			next_bucket;
 	bool			exiting;
 	bool			early_drop;
-	long			next_gc_run;
 };
 
 static __read_mostly struct kmem_cache *nf_conntrack_cachep;

@@ -81,12 +80,8 @@ static __read_mostly spinlock_t nf_conntrack_locks_all_lock;
 static __read_mostly DEFINE_SPINLOCK(nf_conntrack_locks_all_lock);
 static __read_mostly bool nf_conntrack_locks_all;
 
-/* every gc cycle scans at most 1/GC_MAX_BUCKETS_DIV part of table */
-#define GC_MAX_BUCKETS_DIV	128u
-/* upper bound of full table scan */
-#define GC_MAX_SCAN_JIFFIES	(16u * HZ)
-/* desired ratio of entries found to be expired */
-#define GC_EVICT_RATIO	50u
+#define GC_SCAN_INTERVAL	(120u * HZ)
+#define GC_SCAN_MAX_DURATION	msecs_to_jiffies(10)
 
 static struct conntrack_gc_work conntrack_gc_work;
 

@@ -1198,17 +1193,13 @@ static void nf_ct_offload_timeout(struct nf_conn *ct)
 
 static void gc_worker(struct work_struct *work)
 {
-	unsigned int min_interval = max(HZ / GC_MAX_BUCKETS_DIV, 1u);
-	unsigned int i, goal, buckets = 0, expired_count = 0;
-	unsigned int nf_conntrack_max95 = 0;
+	unsigned long end_time = jiffies + GC_SCAN_MAX_DURATION;
+	unsigned int i, hashsz, nf_conntrack_max95 = 0;
+	unsigned long next_run = GC_SCAN_INTERVAL;
 	struct conntrack_gc_work *gc_work;
-	unsigned int ratio, scanned = 0;
-	unsigned long next_run;
-
 	gc_work = container_of(work, struct conntrack_gc_work, dwork.work);
 
-	goal = nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV;
-	i = gc_work->last_bucket;
+	i = gc_work->next_bucket;
 	if (gc_work->early_drop)
 		nf_conntrack_max95 = nf_conntrack_max / 100u * 95u;
 

@@ -1216,22 +1207,21 @@ static void gc_worker(struct work_struct *work)
 		struct nf_conntrack_tuple_hash *h;
 		struct hlist_nulls_head *ct_hash;
 		struct hlist_nulls_node *n;
-		unsigned int hashsz;
 		struct nf_conn *tmp;
 
-		i++;
 		rcu_read_lock();
 
 		nf_conntrack_get_ht(&ct_hash, &hashsz);
-		if (i >= hashsz)
-			i = 0;
+		if (i >= hashsz) {
+			rcu_read_unlock();
+			break;
+		}
 
 		hlist_nulls_for_each_entry_rcu(h, n, &ct_hash[i], hnnode) {
 			struct net *net;
 
 			tmp = nf_ct_tuplehash_to_ctrack(h);
 
-			scanned++;
 			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status)) {
 				nf_ct_offload_timeout(tmp);
 				continue;

@@ -1239,7 +1229,6 @@ static void gc_worker(struct work_struct *work)
 
 			if (nf_ct_is_expired(tmp)) {
 				nf_ct_gc_expired(tmp);
-				expired_count++;
 				continue;
 			}
 

@@ -1271,7 +1260,14 @@ static void gc_worker(struct work_struct *work)
 		 */
 		rcu_read_unlock();
 		cond_resched();
-	} while (++buckets < goal);
+		i++;
+
+		if (time_after(jiffies, end_time) && i < hashsz) {
+			gc_work->next_bucket = i;
+			next_run = 0;
+			break;
+		}
+	} while (i < hashsz);
 
 	if (gc_work->exiting)
 		return;

@@ -1282,40 +1278,17 @@ static void gc_worker(struct work_struct *work)
 	 *
 	 * This worker is only here to reap expired entries when system went
 	 * idle after a busy period.
-	 *
-	 * The heuristics below are supposed to balance conflicting goals:
-	 *
-	 * 1. Minimize time until we notice a stale entry
-	 * 2. Maximize scan intervals to not waste cycles
-	 *
-	 * Normally, expire ratio will be close to 0.
-	 *
-	 * As soon as a sizeable fraction of the entries have expired
-	 * increase scan frequency.
 	 */
-	ratio = scanned ? expired_count * 100 / scanned : 0;
-	if (ratio > GC_EVICT_RATIO) {
-		gc_work->next_gc_run = min_interval;
-	} else {
-		unsigned int max = GC_MAX_SCAN_JIFFIES / GC_MAX_BUCKETS_DIV;
-
-		BUILD_BUG_ON((GC_MAX_SCAN_JIFFIES / GC_MAX_BUCKETS_DIV) == 0);
-
-		gc_work->next_gc_run += min_interval;
-		if (gc_work->next_gc_run > max)
-			gc_work->next_gc_run = max;
+	if (next_run) {
+		gc_work->early_drop = false;
+		gc_work->next_bucket = 0;
 	}
-
-	next_run = gc_work->next_gc_run;
-	gc_work->last_bucket = i;
-	gc_work->early_drop = false;
 	queue_delayed_work(system_power_efficient_wq, &gc_work->dwork, next_run);
 }
 
 static void conntrack_gc_work_init(struct conntrack_gc_work *gc_work)
 {
 	INIT_DEFERRABLE_WORK(&gc_work->dwork, gc_worker);
-	gc_work->next_gc_run = HZ;
 	gc_work->exiting = false;
 }
 

2.30.2

From: Kefeng Wang <[email protected]>

[ Upstream commit 1027b96ec9d34f9abab69bc1a4dc5b1ad8ab1349 ]

DO_ONCE
DEFINE_STATIC_KEY_TRUE(___once_key);
__do_once_done

  once_disable_jump(once_key);
    INIT_WORK(&w->work, once_deferred);
    struct once_work *w;
    w->key = key;
    schedule_work(&w->work);                     module unload
                                                   //*the key is

destroy*
process_one_work
once_deferred
BUG_ON(!static_key_enabled(work->key));
static_key_count((struct static_key *)x) //*access key, crash*

When module uses DO_ONCE mechanism, it could crash due to the above concurrency problem, we could reproduce it with link[1].

Fix it by add/put module refcount in the once work process.

[1] https://lore.kernel.org/netdev/[email protected]/

---
 include/linux/once.h |  4 ++--
 lib/once.c           | 11 ++++++++---
 2 files changed, 10 insertions(+), 5 deletions(-)

index 9225ee6d96c7..ae6f4eb41cbe 100644
@@ -7,7 +7,7 @@
 
 bool __do_once_start(bool *done, unsigned long *flags);
 void __do_once_done(bool *done, struct static_key_true *once_key,
-		    unsigned long *flags);
+		    unsigned long *flags, struct module *mod);
 
 /* Call a function exactly once. The idea of DO_ONCE() is to perform
  * a function call such as initialization of random seeds, etc, only

@@ -46,7 +46,7 @@ void __do_once_done(bool *done, struct static_key_true *once_key,
 			if (unlikely(___ret)) {				     \
 				func(__VA_ARGS__);			     \
 				__do_once_done(&___done, &___once_key,	     \
-					       &___flags);		     \
+					       &___flags, THIS_MODULE);	     \
 			}						     \
 		}							     \
 		___ret;							     \

index 8b7d6235217e..59149bf3bfb4 100644
@@ -3,10 +3,12 @@
 #include <linux/spinlock.h>
 #include <linux/once.h>
 #include <linux/random.h>
+#include <linux/module.h>
 
 struct once_work {
 	struct work_struct work;
 	struct static_key_true *key;
+	struct module *module;
 };
 
 static void once_deferred(struct work_struct *w)

@@ -16,10 +18,11 @@ static void once_deferred(struct work_struct *w)
 	work = container_of(w, struct once_work, work);
 	BUG_ON(!static_key_enabled(work->key));
 	static_branch_disable(work->key);
+	module_put(work->module);
 	kfree(work);
 }
 
-static void once_disable_jump(struct static_key_true *key)
+static void once_disable_jump(struct static_key_true *key, struct module *mod)
 {
 	struct once_work *w;
 

@@ -29,6 +32,8 @@ static void once_disable_jump(struct static_key_true *key)
 
 	INIT_WORK(&w->work, once_deferred);
 	w->key = key;
+	w->module = mod;
+	__module_get(mod);
 	schedule_work(&w->work);
 }
 

@@ -53,11 +58,11 @@ bool __do_once_start(bool *done, unsigned long *flags)
 EXPORT_SYMBOL(__do_once_start);
 
 void __do_once_done(bool *done, struct static_key_true *once_key,
-		    unsigned long *flags)
+		    unsigned long *flags, struct module *mod)
 	__releases(once_lock)
 {
 	*done = true;
 	spin_unlock_irqrestore(&once_lock, *flags);
-	once_disable_jump(once_key);
+	once_disable_jump(once_key, mod);
 }
 EXPORT_SYMBOL(__do_once_done);

2.30.2

From: Stefan Mätje <[email protected]>

commit 044012b52029204900af9e4230263418427f4ba4 upstream.

This patch fixes the interchanged fetch of the CAN RX and TX error counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter is really in struct rx_msg::data[2] and the TX error counter is in struct rx_msg::data[3].

---
 drivers/net/can/usb/esd_usb2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -236,8 +236,8 @@ static void esd_usb2_rx_event(struct esd
 	if (id == ESD_EV_CAN_ERROR_EXT) {
 		u8 state = msg->msg.rx.data[0];
 		u8 ecc = msg->msg.rx.data[1];
-		u8 txerr = msg->msg.rx.data[2];
-		u8 rxerr = msg->msg.rx.data[3];
+		u8 rxerr = msg->msg.rx.data[2];
+		u8 txerr = msg->msg.rx.data[3];
 
 		skb = alloc_can_err_skb(priv->netdev, &cf);
 		if (skb == NULL) {

From: Johan Hovold <[email protected]>

commit df7b16d1c00ecb3da3a30c999cdb39f273c99a2f upstream.

This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b.

These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full.

Revert back to using endpoint-sized receive buffers to avoid stalled reads.

---
 drivers/usb/serial/ch341.c |    1 -
 1 file changed, 1 deletion(-)

@@ -625,7 +625,6 @@ static struct usb_serial_driver ch341_de
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
-	.bulk_in_size      = 512,
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,

From: Zhengjun Zhang <[email protected]>

commit 2829a4e3cf3a6ac2fa3cdb681b37574630fb9c1a upstream.

Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band.

Here are the outputs of lsusb -v and usb-devices:

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -2074,6 +2074,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */

From: Thinh Nguyen <[email protected]>

commit 51f1954ad853d01ba4dc2b35dee14d8490ee05a1 upstream.

We can't depend on the TRB's HWO bit to determine if the TRB ring is "full". A TRB is only available when the driver had processed it, not when the controller consumed and relinquished the TRB's ownership to the driver. Otherwise, the driver may overwrite unprocessed TRBs. This can happen when many transfer events accumulate and the system is slow to process them and/or when there are too many small requests.

If a request is in the started_list, that means there is one or more unprocessed TRBs remained. Check this instead of the TRB's HWO bit whether the TRB ring is full.

---
 drivers/usb/dwc3/gadget.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

@@ -894,19 +894,19 @@ static struct dwc3_trb *dwc3_ep_prev_trb
 
 static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
 {
-	struct dwc3_trb		*tmp;
 	u8			trbs_left;
 
 	/*
-	 * If enqueue & dequeue are equal than it is either full or empty.
-	 *
-	 * One way to know for sure is if the TRB right before us has HWO bit
-	 * set or not. If it has, then we're definitely full and can't fit any
-	 * more transfers in our ring.
+	 * If the enqueue & dequeue are equal then the TRB ring is either full
+	 * or empty. It's considered full when there are DWC3_TRB_NUM-1 of TRBs
+	 * pending to be processed by the driver.
 	 */
 	if (dep->trb_enqueue == dep->trb_dequeue) {
-		tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
-		if (tmp->ctrl & DWC3_TRB_CTRL_HWO)
+		/*
+		 * If there is any request remained in the started_list at
+		 * this point, that means there is no TRB available.
+		 */
+		if (!list_empty(&dep->started_list))
 			return 0;
 
 		return DWC3_TRB_NUM - 1;

From: Wesley Cheng <[email protected]>

commit 4a1e25c0a029b97ea4a3d423a6392bfacc3b2e39 upstream.

During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error:

dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete.

Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage.

---
 drivers/usb/dwc3/gadget.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

@@ -1805,10 +1805,8 @@ static int dwc3_gadget_pullup(struct usb
 
 		ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
 				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
-		if (ret == 0) {
-			dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
-			return -ETIMEDOUT;
-		}
+		if (ret == 0)
+			dev_warn(dwc->dev, "timed out waiting for SETUP phase\n");
 	}
 
 	spin_lock_irqsave(&dwc->lock, flags);

@@ -1946,6 +1944,7 @@ static int __dwc3_gadget_start(struct dw
 	/* begin to receive SETUP packets */
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc->link_state = DWC3_LINK_STATE_SS_DIS;
+	dwc->delayed_status = false;
 	dwc3_ep0_out_start(dwc);
 
 	dwc3_gadget_enable_irq(dwc);

From: Tuo Li <[email protected]>

[ Upstream commit cbe71c61992c38f72c2b625b2ef25916b9f0d060 ]

kmalloc_array() is called to allocate memory for tx->descp. If it fails, the function __sdma_txclean() is called:
__sdma_txclean(dd, tx);

However, in the function __sdma_txclean(), tx-descp is dereferenced if tx->num_desc is not zero:
sdma_unmap_desc(dd, &tx->descp[0]);

To fix this possible null-pointer dereference, assign the return value of kmalloc_array() to a local variable descp, and then assign it to tx->descp if it is not NULL. Otherwise, go to enomem.

---
 drivers/infiniband/hw/hfi1/sdma.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

index 291c12f588b5..38258de75a94 100644
@@ -3055,6 +3055,7 @@ static void __sdma_process_event(struct sdma_engine *sde,
 static int _extend_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
 {
 	int i;
+	struct sdma_desc *descp;
 
 	/* Handle last descriptor */
 	if (unlikely((tx->num_desc == (MAX_DESC - 1)))) {

@@ -3075,12 +3076,10 @@ static int _extend_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
 	if (unlikely(tx->num_desc == MAX_DESC))
 		goto enomem;
 
-	tx->descp = kmalloc_array(
-			MAX_DESC,
-			sizeof(struct sdma_desc),
-			GFP_ATOMIC);
-	if (!tx->descp)
+	descp = kmalloc_array(MAX_DESC, sizeof(struct sdma_desc), GFP_ATOMIC);
+	if (!descp)
 		goto enomem;
+	tx->descp = descp;
 
 	/* reserve last descriptor for coalescing */
 	tx->desc_limit = MAX_DESC - 1;

2.30.2

From: Sasha Neftin <[email protected]>

[ Upstream commit 44a13a5d99c71bf9e1676d9e51679daf4d7b3d73 ]

We should decode the latency and the max_latency before directly compare. The latency should be presented as lat_enc = scale x value:
lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00)

---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 14 +++++++++++++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  3 +++
 2 files changed, 16 insertions(+), 1 deletion(-)

index 7998a73b6a0f..fbad77450725 100644
@@ -995,6 +995,8 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 {
 	u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
 	    link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
+	u16 max_ltr_enc_d = 0;	/* maximum LTR decoded by platform */
+	u16 lat_enc_d = 0;	/* latency decoded */
 	u16 lat_enc = 0;	/* latency encoded */
 
 	if (link) {

@@ -1048,7 +1050,17 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 				     E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop);
 		max_ltr_enc = max_t(u16, max_snoop, max_nosnoop);
 
-		if (lat_enc > max_ltr_enc)
+		lat_enc_d = (lat_enc & E1000_LTRV_VALUE_MASK) *
+			     (1U << (E1000_LTRV_SCALE_FACTOR *
+			     ((lat_enc & E1000_LTRV_SCALE_MASK)
+			     >> E1000_LTRV_SCALE_SHIFT)));
+
+		max_ltr_enc_d = (max_ltr_enc & E1000_LTRV_VALUE_MASK) *
+				 (1U << (E1000_LTRV_SCALE_FACTOR *
+				 ((max_ltr_enc & E1000_LTRV_SCALE_MASK)
+				 >> E1000_LTRV_SCALE_SHIFT)));
+
+		if (lat_enc_d > max_ltr_enc_d)
 			lat_enc = max_ltr_enc;
 	}
 

index 1502895eb45d..e757896287eb 100644
@@ -274,8 +274,11 @@
 
 /* Latency Tolerance Reporting */
 #define E1000_LTRV			0x000F8
+#define E1000_LTRV_VALUE_MASK		0x000003FF
 #define E1000_LTRV_SCALE_MAX		5
 #define E1000_LTRV_SCALE_FACTOR		5
+#define E1000_LTRV_SCALE_SHIFT		10
+#define E1000_LTRV_SCALE_MASK		0x00001C00
 #define E1000_LTRV_REQ_SHIFT		15
 #define E1000_LTRV_NOSNOOP_SHIFT	16
 #define E1000_LTRV_SEND			(1 << 30)

2.30.2

From: Shreyansh Chouhan <[email protected]>

[ Upstream commit 1d011c4803c72f3907eccfc1ec63caefb852fcbf ]

Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call.

This patch deals with ipv4 code.

---
 net/ipv4/ip_gre.c | 2 ++
 1 file changed, 2 insertions(+)

index de6f89511a21..a8a37d112820 100644
@@ -449,6 +449,8 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
 
 static int gre_handle_offloads(struct sk_buff *skb, bool csum)
 {
+	if (csum && skb_checksum_start(skb) < skb->data)
+		return -EINVAL;
 	return iptunnel_handle_offloads(skb, csum ? SKB_GSO_GRE_CSUM : SKB_GSO_GRE);
 }
 

2.30.2

From: Christophe JAILLET <[email protected]>

[ Upstream commit 5ed74b03eb4d08f5dd281dcb5f1c9bb92b363a8d ]

A successful 'xge_mdio_config()' call should be balanced by a corresponding 'xge_mdio_remove()' call in the error handling path of the probe, as already done in the remove function.

Update the error handling path accordingly.

---
 drivers/net/ethernet/apm/xgene-v2/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 0f2ad50f3bd7..7f37e7cb687e 100644
@@ -691,11 +691,13 @@ static int xge_probe(struct platform_device *pdev)
 	ret = register_netdev(ndev);
 	if (ret) {
 		netdev_err(ndev, "Failed to register netdev\n");
-		goto err;
+		goto err_mdio_remove;
 	}
 
 	return 0;
 
+err_mdio_remove:
+	xge_mdio_remove(ndev);
 err:
 	free_netdev(ndev);
 

2.30.2

From: Maxim Kiselev <[email protected]>

[ Upstream commit 359f4cdd7d78fdf8c098713b05fee950a730f131 ]

According to Armada XP datasheet bit at 0 position is corresponding for TxInProg indication.

---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index fda5dd8c71eb..382d010e1294 100644
@@ -100,7 +100,7 @@
 #define      MVNETA_DESC_SWAP                    BIT(6)
 #define      MVNETA_TX_BRST_SZ_MASK(burst)       ((burst) << 22)
 #define MVNETA_PORT_STATUS                       0x2444
-#define      MVNETA_TX_IN_PRGRS                  BIT(1)
+#define      MVNETA_TX_IN_PRGRS                  BIT(0)
 #define      MVNETA_TX_FIFO_EMPTY                BIT(8)
 #define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
 #define MVNETA_SERDES_CFG			 0x24A0

2.30.2

From: Guangbin Huang <[email protected]>

[ Upstream commit 8c1671e0d13d4a0ba4fb3a0da932bf3736d7ff73 ]

Currently, when query PFC configuration by dcbtool, driver will return PFC enable status based on TC. As all priorities are mapped to TC0 by default, if TC0 is enabled, then all priorities mapped to TC0 will be shown as enabled status when query PFC setting, even though some priorities have never been set.

for example:

$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on

To fix this problem, just returns user's PFC config parameter saved in driver.

---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c  | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

index a75d7c826fc2..dd935cd1fb44 100644
@@ -204,21 +204,12 @@ static int hclge_ieee_getpfc(struct hnae3_handle *h, struct ieee_pfc *pfc)
 	u64 requests[HNAE3_MAX_TC], indications[HNAE3_MAX_TC];
 	struct hclge_vport *vport = hclge_get_vport(h);
 	struct hclge_dev *hdev = vport->back;
-	u8 i, j, pfc_map, *prio_tc;
 	int ret;
+	u8 i;
 
 	memset(pfc, 0, sizeof(*pfc));
 	pfc->pfc_cap = hdev->pfc_max;
-	prio_tc = hdev->tm_info.prio_tc;
-	pfc_map = hdev->tm_info.hw_pfc_map;
-
-	/* Pfc setting is based on TC */
-	for (i = 0; i < hdev->tm_info.num_tc; i++) {
-		for (j = 0; j < HNAE3_MAX_USER_PRIO; j++) {
-			if ((prio_tc[j] == i) && (pfc_map & BIT(i)))
-				pfc->pfc_en |= BIT(j);
-		}
-	}
+	pfc->pfc_en = hdev->tm_info.pfc_en;
 
 	ret = hclge_pfc_tx_stats_get(hdev, requests);
 	if (ret)

2.30.2

From: Jerome Brunet <[email protected]>

[ Upstream commit 068fdad20454f815e61e6f6eb9f051a8b3120e88 ]

If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer.

Fix this by clearing ep_enabled after all the endpoint requests have been dequeued.

---
 drivers/usb/gadget/function/u_audio.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

index 0cb0c638fd13..168303f21bf4 100644
@@ -349,8 +349,6 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 	if (!prm->ep_enabled)
 		return;
 
-	prm->ep_enabled = false;
-
 	audio_dev = uac->audio_dev;
 	params = &audio_dev->params;
 

@@ -368,11 +366,12 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 		}
 	}
 
+	prm->ep_enabled = false;
+
 	if (usb_ep_disable(ep))
 		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
 }
 
-
 int u_audio_start_capture(struct g_audio *audio_dev)
 {
 	struct snd_uac_chip *uac = audio_dev->uac;

2.30.2

From: Michał Mirosław <[email protected]>

[ Upstream commit 335ffab3ef864539e814b9a2903b0ae420c1c067 ]

This WARN can be triggered per-core and the stack trace is not useful. Replace it with plain dev_err(). Fix a comment while at it.

---
 drivers/opp/of.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index d64a13d7881b..a53123356697 100644
@@ -423,8 +423,9 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 		}
 	}
 
-	/* There should be one of more OPP defined */
-	if (WARN_ON(!count)) {
+	/* There should be one or more OPPs defined */
+	if (!count) {
+		dev_err(dev, "%s: no supported OPPs", __func__);
 		ret = -ENOENT;
 		goto put_opp_table;
 	}

2.30.2

From: Parav Pandit <[email protected]>

[ Upstream commit 60f0779862e4ab943810187752c462e85f5fa371 ]

Currently vq->broken field is read by virtqueue_is_broken() in busy loop in one context by virtnet_send_command().

vq->broken is set to true in other process context by virtio_break_device(). Reader and writer are accessing it without any synchronization. This may lead to a compiler optimization which may result to optimize reading vq->broken only once.

Hence, force reading vq->broken on each invocation of virtqueue_is_broken() and also force writing it so that such update is visible to the readers.

It is a theoretical fix that isn't yet encountered in the field.

---
 drivers/virtio/virtio_ring.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

index df7980aef927..0cc0cfd3a3cb 100644
@@ -1197,7 +1197,7 @@ bool virtqueue_is_broken(struct virtqueue *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
-	return vq->broken;
+	return READ_ONCE(vq->broken);
 }
 EXPORT_SYMBOL_GPL(virtqueue_is_broken);
 

@@ -1211,7 +1211,9 @@ void virtio_break_device(struct virtio_device *dev)
 
 	list_for_each_entry(_vq, &dev->vqs, list) {
 		struct vring_virtqueue *vq = to_vvq(_vq);
-		vq->broken = true;
+
+		/* Pairs with READ_ONCE() in virtqueue_is_broken(). */
+		WRITE_ONCE(vq->broken, true);
 	}
 }
 EXPORT_SYMBOL_GPL(virtio_break_device);

2.30.2

From: Parav Pandit <[email protected]>

[ Upstream commit 43bb40c5b92659966bdf4bfe584fde0a3575a049 ]

When a virtio pci device undergo surprise removal (aka async removal in PCIe spec), mark the device as broken so that any upper layer drivers can abort any outstanding operation.

When a virtio net pci device undergo surprise removal which is used by a NetworkManager, a below call trace was observed.

kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059]

watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059]
CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S      W I  L    5.13.0-hotplug+ #8
Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020
Workqueue: events linkwatch_event
RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net]
Call Trace:
 virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net]
 ? __hw_addr_create_ex+0x85/0xc0
 __dev_mc_add+0x72/0x80
 igmp6_group_added+0xa7/0xd0
 ipv6_mc_up+0x3c/0x60
 ipv6_find_idev+0x36/0x80
 addrconf_add_dev+0x1e/0xa0
 addrconf_dev_config+0x71/0x130
 addrconf_notify+0x1f5/0xb40
 ? rtnl_is_locked+0x11/0x20
 ? __switch_to_asm+0x42/0x70
 ? finish_task_switch+0xaf/0x2c0
 ? raw_notifier_call_chain+0x3e/0x50
 raw_notifier_call_chain+0x3e/0x50
 netdev_state_change+0x67/0x90
 linkwatch_do_dev+0x3c/0x50
 __linkwatch_run_queue+0xd2/0x220
 linkwatch_event+0x21/0x30
 process_one_work+0x1c8/0x370
 worker_thread+0x30/0x380
 ? process_one_work+0x370/0x370
 kthread+0x118/0x140
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30

Hence, add the ability to abort the command on surprise removal which prevents infinite loop and system lockup.

---
 drivers/virtio/virtio_pci_common.c | 7 +++++++
 1 file changed, 7 insertions(+)

index 45b04bc91f24..b7cc63f556ee 100644
@@ -579,6 +579,13 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
 	struct device *dev = get_device(&vp_dev->vdev.dev);
 
+	/*
+	 * Device is marked broken on surprise removal so that virtio upper
+	 * layers can abort any ongoing operation.
+	 */
+	if (!pci_device_is_present(pci_dev))
+		virtio_break_device(&vp_dev->vdev);
+
 	pci_disable_sriov(pci_dev);
 
 	unregister_virtio_device(&vp_dev->vdev);

2.30.2

From: Neeraj Upadhyay <[email protected]>

[ Upstream commit e74cfa91f42c50f7f649b0eca46aa049754ccdbd ]

As __vringh_iov() traverses a descriptor chain, it populates each descriptor entry into either read or write vring iov and increments that iov's ->used member. So, as we iterate over a descriptor chain, at any point, (riov/wriov)->used value gives the number of descriptor enteries available, which are to be read or written by the device. As all read iovs must precede the write iovs, wiov->used should be zero when we are traversing a read descriptor. Current code checks for wiov->i, to figure out whether any previous entry in the current descriptor chain was a write descriptor. However, iov->i is only incremented, when these vring iovs are consumed, at a later point, and remain 0 in __vringh_iov(). So, correct the check for read and write descriptor order, to use wiov->used.

---
 drivers/vhost/vringh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 59c61744dcc1..97aa9b87e572 100644
@@ -330,7 +330,7 @@ __vringh_iov(struct vringh *vrh, u16 i,
 			iov = wiov;
 		else {
 			iov = riov;
-			if (unlikely(wiov && wiov->i)) {
+			if (unlikely(wiov && wiov->used)) {
 				vringh_bad("Readable desc %p after writable",
 					   &descs[i]);
 				err = -EINVAL;

2.30.2

From: Shai Malin <[email protected]>

[ Upstream commit 37110237f31105d679fc0aa7b11cdec867750ea7 ]

Avoiding qed ll2 race condition and NULL pointer dereference as part of the remove and recovery flows.

Changes form V1:
- Change (!p_rx->set_prod_addr).
- qed_ll2.c checkpatch fixes.

Change from V2:
- Revert "qed_ll2.c checkpatch fixes".

---
 drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

index 2847509a183d..cb3569ac85f7 100644
@@ -354,6 +354,9 @@ static int qed_ll2_txq_completion(struct qed_hwfn *p_hwfn, void *p_cookie)
 	unsigned long flags;
 	int rc = -EINVAL;
 
+	if (!p_ll2_conn)
+		return rc;
+
 	spin_lock_irqsave(&p_tx->lock, flags);
 	if (p_tx->b_completing_packet) {
 		rc = -EBUSY;

@@ -527,7 +530,16 @@ static int qed_ll2_rxq_completion(struct qed_hwfn *p_hwfn, void *cookie)
 	unsigned long flags = 0;
 	int rc = 0;
 
+	if (!p_ll2_conn)
+		return rc;
+
 	spin_lock_irqsave(&p_rx->lock, flags);
+
+	if (!QED_LL2_RX_REGISTERED(p_ll2_conn)) {
+		spin_unlock_irqrestore(&p_rx->lock, flags);
+		return 0;
+	}
+
 	cq_new_idx = le16_to_cpu(*p_rx->p_fw_cons);
 	cq_old_idx = qed_chain_get_cons_idx(&p_rx->rcq_chain);
 

@@ -848,6 +860,9 @@ static int qed_ll2_lb_rxq_completion(struct qed_hwfn *p_hwfn, void *p_cookie)
 	struct qed_ll2_info *p_ll2_conn = (struct qed_ll2_info *)p_cookie;
 	int rc;
 
+	if (!p_ll2_conn)
+		return 0;
+
 	if (!QED_LL2_RX_REGISTERED(p_ll2_conn))
 		return 0;
 

@@ -871,6 +886,9 @@ static int qed_ll2_lb_txq_completion(struct qed_hwfn *p_hwfn, void *p_cookie)
 	u16 new_idx = 0, num_bds = 0;
 	int rc;
 
+	if (!p_ll2_conn)
+		return 0;
+
 	if (!QED_LL2_TX_REGISTERED(p_ll2_conn))
 		return 0;
 

@@ -1628,6 +1646,8 @@ int qed_ll2_post_rx_buffer(void *cxt,
 	if (!p_ll2_conn)
 		return -EINVAL;
 	p_rx = &p_ll2_conn->rx_queue;
+	if (!p_rx->set_prod_addr)
+		return -EIO;
 
 	spin_lock_irqsave(&p_rx->lock, flags);
 	if (!list_empty(&p_rx->free_descq))

2.30.2

From: Shai Malin <[email protected]>

[ Upstream commit d33d19d313d3466abdf8b0428be7837aff767802 ]

Fix a possible null-pointer dereference in qed_rdma_create_qp().

Changes from V2:
- Revert checkpatch fixes.

---
 drivers/net/ethernet/qlogic/qed/qed_rdma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

index 909422d93903..3392982ff374 100644
@@ -1244,8 +1244,7 @@ qed_rdma_create_qp(void *rdma_cxt,
 
 	if (!rdma_cxt || !in_params || !out_params ||
 	    !p_hwfn->p_rdma_info->active) {
-		DP_ERR(p_hwfn->cdev,
-		       "qed roce create qp failed due to NULL entry (rdma_cxt=%p, in=%p, out=%p, roce_info=?\n",
+		pr_err("qed roce create qp failed due to NULL entry (rdma_cxt=%p, in=%p, out=%p, roce_info=?\n",
 		       rdma_cxt, in_params, out_params);
 		return NULL;
 	}

2.30.2

From: Mark Yacoub <[email protected]>

[ Upstream commit fa0b1ef5f7a694f48e00804a391245f3471aa155 ]

[Why]
Userspace should get back a copy of drm_wait_vblank that's been modified even when drm_wait_vblank_ioctl returns a failure.

Rationale:
drm_wait_vblank_ioctl modifies the request and expects the user to read it back. When the type is RELATIVE, it modifies it to ABSOLUTE and updates the sequence to become current_vblank_count + sequence (which was RELATIVE), but now it became ABSOLUTE.
drmWaitVBlank (in libdrm) expects this to be the case as it modifies the request to be Absolute so it expects the sequence to would have been updated.

The change is in compat_drm_wait_vblank, which is called by drm_compat_ioctl. This change of copying the data back regardless of the return number makes it en par with drm_ioctl, which always copies the data before returning.

[How]
Return from the function after everything has been copied to user.

Fixes IGT:kms_flip::modeset-vs-vblank-race-interruptible Tested on ChromeOS Trogdor(msm)

---
 drivers/gpu/drm/drm_ioc32.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

index ab8847c7dd96..87e13bcd7a67 100644
@@ -855,8 +855,6 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd,
 	req.request.sequence = req32.request.sequence;
 	req.request.signal = req32.request.signal;
 	err = drm_ioctl_kernel(file, drm_wait_vblank_ioctl, &req, DRM_UNLOCKED);
-	if (err)
-		return err;
 
 	req32.reply.type = req.reply.type;
 	req32.reply.sequence = req.reply.sequence;

@@ -865,7 +863,7 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd,
 	if (copy_to_user(argp, &req32, sizeof(req32)))
 		return -EFAULT;
 
-	return 0;
+	return err;
 }
 
 #if defined(CONFIG_X86)

2.30.2

From: Ben Skeggs <[email protected]>

[ Upstream commit 6eaa1f3c59a707332e921e32782ffcad49915c5e ]

When booted with multiple displays attached, the EFI GOP driver on (at least) Ampere, can leave DP links powered up that aren't being used to display anything. This confuses our tracking of SOR routing, with the likely result being a failed modeset and display engine hang.

Fix this by (ab?)using the DisableLT IED script to power-down the link, restoring HW to a state the driver expects.

---
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c   | 2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h   | 1 +
 drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c | 9 +++++++++
 3 files changed, 11 insertions(+), 1 deletion(-)

index 818d21bd28d3..1d2837c5a8f2 100644
@@ -419,7 +419,7 @@ nvkm_dp_train(struct nvkm_dp *dp, u32 dataKBps)
 	return ret;
 }
 
-static void
+void
 nvkm_dp_disable(struct nvkm_outp *outp, struct nvkm_ior *ior)
 {
 	struct nvkm_dp *dp = nvkm_dp(outp);

index 495f665a0ee6..12d6ff4cfa95 100644
@@ -32,6 +32,7 @@ struct nvkm_dp {
 
 int nvkm_dp_new(struct nvkm_disp *, int index, struct dcb_output *,
 		struct nvkm_outp **);
+void nvkm_dp_disable(struct nvkm_outp *, struct nvkm_ior *);
 
 /* DPCD Receiver Capabilities */
 #define DPCD_RC00_DPCD_REV                                              0x00000

index c62030c96fba..4b1c72fd8f03 100644
@@ -22,6 +22,7 @@
  * Authors: Ben Skeggs
  */
 #include "outp.h"
+#include "dp.h"
 #include "ior.h"
 
 #include <subdev/bios.h>

@@ -216,6 +217,14 @@ nvkm_outp_init_route(struct nvkm_outp *outp)
 	if (!ior->arm.head || ior->arm.proto != proto) {
 		OUTP_DBG(outp, "no heads (%x %d %d)", ior->arm.head,
 			 ior->arm.proto, proto);
+
+		/* The EFI GOP driver on Ampere can leave unused DP links routed,
+		 * which we don't expect.  The DisableLT IED script *should* get
+		 * us back to where we need to be.
+		 */
+		if (ior->func->route.get && !ior->arm.head && outp->info.type == DCB_OUTPUT_DP)
+			nvkm_dp_disable(outp, ior);
+
 		return;
 	}
 

2.30.2

From: Gerd Rausch <[email protected]>

[ Upstream commit fb4b1373dcab086d0619c29310f0466a0b2ceb8a ]

Function "dma_map_sg" is entitled to merge adjacent entries and return a value smaller than what was passed as "nents".

Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len") rather than the original "nents" parameter ("sg_len").

This old RDS bug was exposed and reliably causes kernel panics (using RDMA operations "rds-stress -D") on x86_64 starting with:
commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")

Simply put: Linux 5.11 and later.

---
 net/rds/ib_frmr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 6431a023ac89..46988c009a3e 100644
@@ -111,9 +111,9 @@ static int rds_ib_post_reg_frmr(struct rds_ib_mr *ibmr)
 		cpu_relax();
 	}
 
-	ret = ib_map_mr_sg_zbva(frmr->mr, ibmr->sg, ibmr->sg_len,
+	ret = ib_map_mr_sg_zbva(frmr->mr, ibmr->sg, ibmr->sg_dma_len,
 				&off, PAGE_SIZE);
-	if (unlikely(ret != ibmr->sg_len))
+	if (unlikely(ret != ibmr->sg_dma_len))
 		return ret < 0 ? ret : -EINVAL;
 
 	/* Perform a WR for the fast_reg_mr. Each individual page

2.30.2

From: Linus Torvalds <[email protected]>

commit 2287a51ba822384834dafc1c798453375d1107c7 upstream.

As per the long-suffering comment.

---
 drivers/tty/vt/vt_ioctl.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

@@ -484,16 +484,19 @@ int vt_ioctl(struct tty_struct *tty,
 			ret = -EINVAL;
 			goto out;
 		}
-		/* FIXME: this needs the console lock extending */
-		if (vc->vc_mode == (unsigned char) arg)
+		console_lock();
+		if (vc->vc_mode == (unsigned char) arg) {
+			console_unlock();
 			break;
+		}
 		vc->vc_mode = (unsigned char) arg;
-		if (console != fg_console)
+		if (console != fg_console) {
+			console_unlock();
 			break;
+		}
 		/*
 		 * explicitly blank/unblank the screen if switching modes
 		 */
-		console_lock();
 		if (arg == KD_TEXT)
 			do_unblank_screen(1);
 		else

From: George Kennedy <[email protected]>

commit a49145acfb975d921464b84fe00279f99827d816 upstream.

A fb_ioctl() FBIOPUT_VSCREENINFO call with invalid xres setting or yres setting in struct fb_var_screeninfo will result in a

KASAN: vmalloc-out-of-bounds failure in bitfill_aligned() as

the margins are being cleared. The margins are cleared in chunks and if the xres setting or yres setting is a value of zero upto the chunk size, the failure will occur.

Add a margin check to validate xres and yres settings.

---
 drivers/video/fbdev/core/fbmem.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -991,6 +991,10 @@ fb_set_var(struct fb_info *info, struct
 			goto done;
 		}
 
+		/* bitfill_aligned() assumes that it's at least 8x8 */
+		if (var->xres < 8 || var->yres < 8)
+			return -EINVAL;
+
 		ret = info->fbops->fb_check_var(var, info);
 
 		if (ret)

From: Sean Christopherson <[email protected]>

commit 112022bdb5bc372e00e6e43cb88ee38ea67b97bd upstream

Mark NX as being used for all non-nested shadow MMUs, as KVM will set the NX bit for huge SPTEs if the iTLB mutli-hit mitigation is enabled. Checking the mitigation itself is not sufficient as it can be toggled on at any time and KVM doesn't reset MMU contexts when that happens. KVM could reset the contexts, but that would require purging all SPTEs in all MMUs, for no real benefit. And, KVM already forces EFER.NX=1 when TDP is disabled (for WP=0, SMEP=1, NX=0), so technically NX is never reserved for shadow MMUs.

Message-Id: <[email protected]>

---
 arch/x86/kvm/mmu.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

@@ -4557,7 +4557,16 @@ static void reset_rsvds_bits_mask_ept(st
 void
 reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context)
 {
-	bool uses_nx = context->nx || context->base_role.smep_andnot_wp;
+	/*
+	 * KVM uses NX when TDP is disabled to handle a variety of scenarios,
+	 * notably for huge SPTEs if iTLB multi-hit mitigation is enabled and
+	 * to generate correct permissions for CR0.WP=0/CR4.SMEP=1/EFER.NX=0.
+	 * The iTLB multi-hit workaround can be toggled at any time, so assume
+	 * NX can be used by any non-nested shadow MMU to avoid having to reset
+	 * MMU contexts.  Note, KVM forces EFER.NX=1 when TDP is disabled.
+	 */
+	bool uses_nx = context->nx || !tdp_enabled ||
+		context->base_role.smep_andnot_wp;
 	struct rsvd_bits_validate *shadow_zero_check;
 	int i;
 

From: Denis Efremov <[email protected]>

commit c7e9d0020361f4308a70cdfd6d5335e273eb8717 upstream.

The patch breaks userspace implementations (e.g. fdutils) and introduces regressions in behaviour. Previously, it was possible to O_NDELAY open a floppy device with no media inserted or with write protected media without an error. Some userspace tools use this particular behavior for probing.

It's not the first time when we revert this patch. Previous revert is in commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling").

This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8.

---
 drivers/block/floppy.c |   27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

@@ -4074,22 +4074,21 @@ static int floppy_open(struct block_devi
 	if (UFDCS->rawcmd == 1)
 		UFDCS->rawcmd = 2;
 
-	if (mode & (FMODE_READ|FMODE_WRITE)) {
-		UDRS->last_checked = 0;
-		clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags);
-		check_disk_change(bdev);
-		if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
-			goto out;
-		if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags))
+	if (!(mode & FMODE_NDELAY)) {
+		if (mode & (FMODE_READ|FMODE_WRITE)) {
+			UDRS->last_checked = 0;
+			clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags);
+			check_disk_change(bdev);
+			if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
+				goto out;
+			if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags))
+				goto out;
+		}
+		res = -EROFS;
+		if ((mode & FMODE_WRITE) &&
+		    !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
 			goto out;
 	}
-
-	res = -EROFS;
-
-	if ((mode & FMODE_WRITE) &&
-			!test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
-		goto out;
-
 	mutex_unlock(&open_lock);
 	mutex_unlock(&floppy_mutex);
 	return 0;

From: Peter Collingbourne <[email protected]>

commit d0efb16294d145d157432feda83877ae9d7cdf37 upstream.

A common implementation of isatty(3) involves calling a ioctl passing a dummy struct argument and checking whether the syscall failed -- bionic and glibc use TCGETS (passing a struct termios), and musl uses TIOCGWINSZ (passing a struct winsize). If the FD is a socket, we will copy sizeof(struct ifreq) bytes of data from the argument and return -EFAULT if that fails. The result is that the isatty implementations may return a non-POSIX-compliant value in errno in the case where part of the dummy struct argument is inaccessible, as both struct termios and struct winsize are smaller than struct ifreq (at least on arm64).

Although there is usually enough stack space following the argument on the stack that this did not present a practical problem up to now, with MTE stack instrumentation it's more likely for the copy to fail, as the memory following the struct may have a different tag.

Fix the problem by adding an early check for whether the ioctl is a valid socket ioctl, and return -ENOTTY if it isn't.

---
 include/linux/netdevice.h |    4 ++++
 net/socket.c              |    6 +++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

@@ -3594,6 +3594,10 @@ int netdev_rx_handler_register(struct ne
 void netdev_rx_handler_unregister(struct net_device *dev);
 
 bool dev_valid_name(const char *name);
+static inline bool is_socket_ioctl_cmd(unsigned int cmd)
+{
+	return _IOC_TYPE(cmd) == SOCK_IOC_TYPE;
+}
 int dev_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr,
 		bool *need_copyout);
 int dev_ifconf(struct net *net, struct ifconf *, int);

@@ -1030,7 +1030,7 @@ static long sock_do_ioctl(struct net *ne
 		rtnl_unlock();
 		if (!err && copy_to_user(argp, &ifc, sizeof(struct ifconf)))
 			err = -EFAULT;
-	} else {
+	} else if (is_socket_ioctl_cmd(cmd)) {
 		struct ifreq ifr;
 		bool need_copyout;
 		if (copy_from_user(&ifr, argp, sizeof(struct ifreq)))

@@ -1039,6 +1039,8 @@ static long sock_do_ioctl(struct net *ne
 		if (!err && need_copyout)
 			if (copy_to_user(argp, &ifr, sizeof(struct ifreq)))
 				return -EFAULT;
+	} else {
+		err = -ENOTTY;
 	}
 	return err;
 }

@@ -3064,6 +3066,8 @@ static int compat_ifr_data_ioctl(struct
 	struct ifreq ifreq;
 	u32 data32;
 
+	if (!is_socket_ioctl_cmd(cmd))
+		return -ENOTTY;
 	if (copy_from_user(ifreq.ifr_name, u_ifreq32->ifr_name, IFNAMSIZ))
 		return -EFAULT;
 	if (get_user(data32, &u_ifreq32->ifr_data))

All tests passing for Tegra ...

Test results for stable-v4.19:

    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version: 4.19.206-rc1-gfc1fd7aed81d
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested on arm64 and x86 for 4.19.206-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.206-rc1
Commit: 0ec64a47cbb11f5919e47cdab83f201ea5ca6076
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8859
passed: 8859
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8859
passed: 8859
failed: 0
timeout: 0
--------------------------------------------------------------------

Hi Greg,

Build test:
mips (gcc version 11.1.1 20210816): 63 configs -> no failure arm (gcc version 11.1.1 20210816): 116 configs -> no new failure arm64 (gcc version 11.1.1 20210816): 2 configs -> no failure x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/78

--
Regards
Sudip

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.19.206-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: fc1fd7aed81d18bc92d0e096033e11161cea98aa
* git describe: v4.19.205-34-gfc1fd7aed81d
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.205-34-gfc1fd7aed81d

## No regressions (compared to v4.19.205-20-g0ec64a47cbb1)

## No fixes (compared to v4.19.205-20-g0ec64a47cbb1)

## Test result summary
total: 80130, pass: 64266, fail: 784, skip: 13234, xfail: 1846

## Build Summary
* arm: 98 total, 98 passed, 0 failed
* arm64: 34 total, 34 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 41 total, 41 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 18 total, 18 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 438 pass: 438 fail: 0

Guenter