staging: media: zoran: fusion in one module
Subsystems (2)
cover staging: media: zoran: fusion in one module
Hello
The main change of this serie is to fusion all zoran related modules in one.
This fixes the load order problem when everything is built-in.
Regards
Corentin Labbe (8):
staging: media: zoran: move module parameter checks to zoran_probe
staging: media: zoran: use module_pci_driver
staging: media: zoran: rename debug module parameter
staging: media: zoran: add debugfs
staging: media: zoran: videocode: remove procfs
staging: media: zoran: fusion all modules
staging: media: zoran: remove vidmem
staging: media: zoran: move videodev alloc
drivers/staging/media/zoran/Kconfig | 24 +- drivers/staging/media/zoran/Makefile | 8 +- drivers/staging/media/zoran/videocodec.c | 60 +---- drivers/staging/media/zoran/videocodec.h | 5 + drivers/staging/media/zoran/zoran.h | 7 +- drivers/staging/media/zoran/zoran_card.c | 259 +++++++++++++-------- drivers/staging/media/zoran/zoran_driver.c | 5 +- drivers/staging/media/zoran/zr36016.c | 23 +- drivers/staging/media/zoran/zr36016.h | 2 + drivers/staging/media/zoran/zr36050.c | 20 +- drivers/staging/media/zoran/zr36050.h | 2 + drivers/staging/media/zoran/zr36060.c | 20 +- drivers/staging/media/zoran/zr36060.h | 2 + 13 files changed, 229 insertions(+), 208 deletions(-)
Signature · 1 line
2.32.0
PATCH 1/8 staging: media: zoran: move module parameter checks to zoran_probe
We need to empty zoran_init() for removing it later. Furthermore, this permit to use pci_xxx instead of pr_xxx for prettier printing.
--- drivers/staging/media/zoran/zoran_card.c | 64 ++++++++++++------------ 1 file changed, 33 insertions(+), 31 deletions(-)
drivers/staging/media/zoran/zoran_card.c +33 -31
@@ -1067,6 +1067,39 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent)unsigned int nr;int err; +pci_info (pdev,"Zoran MJPEG board driver version %s\n" ,ZORAN_VERSION ); + +/* check the parameters we have been given, adjust if necessary */ +if (v4l_nbufs <2 ) + v4l_nbufs =2 ; +if (v4l_nbufs >VIDEO_MAX_FRAME ) + v4l_nbufs =VIDEO_MAX_FRAME ; +/* The user specifies the in KB, we want them in byte (and page aligned) */ + v4l_bufsize =PAGE_ALIGN (v4l_bufsize *1024 ); +if (v4l_bufsize <32768 ) + v4l_bufsize =32768 ; +/* 2 MB is arbitrary but sufficient for the maximum possible images */ +if (v4l_bufsize >2048 *1024 ) + v4l_bufsize =2048 *1024 ; +if (jpg_nbufs <4 ) + jpg_nbufs =4 ; +if (jpg_nbufs >BUZ_MAX_FRAME ) + jpg_nbufs =BUZ_MAX_FRAME ; + jpg_bufsize =PAGE_ALIGN (jpg_bufsize *1024 ); +if (jpg_bufsize <8192 ) + jpg_bufsize =8192 ; +if (jpg_bufsize > (512 *1024 )) + jpg_bufsize =512 *1024 ; +/* Use parameter for vidmem or try to find a video card */ +if (vidmem) +pci_info (pdev,"%s: Using supplied video memory base address @ 0x%lx\n" , +ZORAN_NAME , vidmem); + +/* some mainboards might not do PCI-PCI data transfer well */ +if (pci_pci_problems & (PCIPCI_FAIL |PCIAGP_FAIL |PCIPCI_ALIMAGIK )) +pci_warn (pdev,"%s: chipset does not support reliable PCI-PCI DMA\n" , +ZORAN_NAME ); + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 ));if (err)return -ENODEV ;
@@ -1285,37 +1318,6 @@ static int __init zoran_init(void) {int res; -pr_info ("Zoran MJPEG board driver version %s\n" ,ZORAN_VERSION ); - -/* check the parameters we have been given, adjust if necessary */ -if (v4l_nbufs <2 ) - v4l_nbufs =2 ; -if (v4l_nbufs >VIDEO_MAX_FRAME ) - v4l_nbufs =VIDEO_MAX_FRAME ; -/* The user specifies the in KB, we want them in byte (and page aligned) */ - v4l_bufsize =PAGE_ALIGN (v4l_bufsize *1024 ); -if (v4l_bufsize <32768 ) - v4l_bufsize =32768 ; -/* 2 MB is arbitrary but sufficient for the maximum possible images */ -if (v4l_bufsize >2048 *1024 ) - v4l_bufsize =2048 *1024 ; -if (jpg_nbufs <4 ) - jpg_nbufs =4 ; -if (jpg_nbufs >BUZ_MAX_FRAME ) - jpg_nbufs =BUZ_MAX_FRAME ; - jpg_bufsize =PAGE_ALIGN (jpg_bufsize *1024 ); -if (jpg_bufsize <8192 ) - jpg_bufsize =8192 ; -if (jpg_bufsize > (512 *1024 )) - jpg_bufsize =512 *1024 ; -/* Use parameter for vidmem or try to find a video card */ -if (vidmem) -pr_info ("%s: Using supplied video memory base address @ 0x%lx\n" ,ZORAN_NAME , vidmem); - -/* some mainboards might not do PCI-PCI data transfer well */ -if (pci_pci_problems & (PCIPCI_FAIL |PCIAGP_FAIL |PCIPCI_ALIMAGIK )) -pr_warn ("%s: chipset does not support reliable PCI-PCI DMA\n" ,ZORAN_NAME ); - res =pci_register_driver (&zoran_driver);if (res) {pr_err ("Unable to register ZR36057 driver\n" );
Signature · 1 line
2.32.0
PATCH 2/8 staging: media: zoran: use module_pci_driver
In reply to Corentin LabbeSimplify code by using module_pci_driver()
--- drivers/staging/media/zoran/zoran_card.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
drivers/staging/media/zoran/zoran_card.c +1 -20
@@ -1314,23 +1314,4 @@ static struct pci_driver zoran_driver = { .remove = zoran_remove, }; -static int __init zoran_init (void ) -{ -int res; - - res =pci_register_driver (&zoran_driver); -if (res) { -pr_err ("Unable to register ZR36057 driver\n" ); -return res; - } - -return 0 ; -} - -static void __exit zoran_exit(void) -{ -pci_unregister_driver (&zoran_driver); -} - -module_init (zoran_init); -module_exit (zoran_exit); +module_pci_driver (zoran_driver);
Signature · 1 line
2.32.0
PATCH 3/8 staging: media: zoran: rename debug module parameter
In reply to Corentin LabbeAll zoran module will be merged, so to prevent conflict, the debug module parameter need to be renamed
--- drivers/staging/media/zoran/videocodec.c | 8 ++++---- drivers/staging/media/zoran/zr36016.c | 12 ++++++------ drivers/staging/media/zoran/zr36050.c | 8 ++++---- drivers/staging/media/zoran/zr36060.c | 9 ++++----- 4 files changed, 18 insertions(+), 19 deletions(-)
drivers/staging/media/zoran/videocodec.c +4 -4
@@ -26,13 +26,13 @@#include "videocodec.h" -static int debug; -module_param (debug, int,0 ); -MODULE_PARM_DESC (debug,"Debug level (0-4)" ); +static int videocodec_debug; +module_param (videocodec_debug, int,0 ); +MODULE_PARM_DESC (videocodec_debug,"Debug level (0-4)" ); #define dprintk(num, format, args...) \ do { \ - if (debug >= num) \ + if (videocodec_debug >= num) \ printk(format, ##args); \ } while (0)
drivers/staging/media/zoran/zr36016.c +6 -6
@@ -22,14 +22,14 @@/* amount of chips attached via this driver */ static int zr36016_codecs; -/* debugging is available via module parameter */ -static int debug; -module_param (debug, int,0 ); -MODULE_PARM_DESC (debug,"Debug level (0-4)" ); +static int zr36016_debug; +module_param (zr36016_debug, int,0 ); +MODULE_PARM_DESC (zr36016_debug,"Debug level (0-4)" ); + #define dprintk(num, format, args...) \ do { \ - if (debug >= num) \ + if (zr36016_debug >= num) \ printk(format, ##args); \ } while (0)
@@ -120,7 +120,7 @@ static u8 zr36016_read_version(struct zr36016 *ptr)static int zr36016_basic_test (struct zr36016 *ptr) { -if (debug) { +if (zr36016_debug) {int i;zr36016_writei (ptr,ZR016I_PAX_LO ,0x55 );
drivers/staging/media/zoran/zr36050.c +4 -4
@@ -32,13 +32,13 @@static int zr36050_codecs;/* debugging is available via module parameter */ -static int debug; -module_param (debug, int,0 ); -MODULE_PARM_DESC (debug,"Debug level (0-4)" ); +static int zr36050_debug; +module_param (zr36050_debug, int,0 ); +MODULE_PARM_DESC (zr36050_debug,"Debug level (0-4)" ); #define dprintk(num, format, args...) \ do { \ - if (debug >= num) \ + if (zr36050_debug >= num) \ printk(format, ##args); \ } while (0)
drivers/staging/media/zoran/zr36060.c +4 -5
@@ -34,14 +34,13 @@ static bool low_bitrate;module_param (low_bitrate, bool,0 );MODULE_PARM_DESC (low_bitrate,"Buz compatibility option, halves bitrate" ); -/* debugging is available via module parameter */ -static int debug; -module_param (debug, int,0 ); -MODULE_PARM_DESC (debug,"Debug level (0-4)" ); +static int zr36060_debug; +module_param (zr36060_debug, int,0 ); +MODULE_PARM_DESC (zr36060_debug,"Debug level (0-4)" ); #define dprintk(num, format, args...) \ do { \ - if (debug >= num) \ + if (zr36060_debug >= num) \ printk(format, ##args); \ } while (0)
Signature · 1 line
2.32.0
PATCH 4/8 staging: media: zoran: add debugfs
In reply to Corentin LabbeAdd debugfs for displaying zoran debug and stats information.
--- drivers/staging/media/zoran/Kconfig | 10 ++++++ drivers/staging/media/zoran/zoran.h | 5 +++ drivers/staging/media/zoran/zoran_card.c | 39 ++++++++++++++++++++++++ 3 files changed, 54 insertions(+)
drivers/staging/media/zoran/Kconfig +10 -0
@@ -74,3 +74,13 @@ config VIDEO_ZORAN_AVS6EYES select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT help Support for the AverMedia 6 Eyes video surveillance card. + +config VIDEO_ZORAN_DEBUG + bool "Enable zoran debugfs" + depends on VIDEO_ZORAN + depends on DEBUG_FS + help + Say y to enable zoran debug file. + This will create /sys/kernel/debug/CARD_NAME/debug for displaying + stats and debug information. +
drivers/staging/media/zoran/zoran.h +5 -0
@@ -18,6 +18,7 @@#ifndef _BUZ_H_#define _BUZ_H_ +#include <linux/debugfs.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> #include <media/videobuf2-core.h>
@@ -295,6 +296,10 @@ struct zoran {struct list_head queued_bufs;spinlock_t queued_bufs_lock;/* Protects queued_bufs */ struct zr_buffer *inuse[BUZ_NUM_STAT_COM *2 ]; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +struct dentry *dbgfs_dir; +struct dentry *dbgfs_file; +#endif };static inline struct zoran *to_zoran (struct v4l2_device *v4l2_dev)
drivers/staging/media/zoran/zoran_card.c +39 -0
@@ -1051,6 +1051,39 @@ static const struct v4l2_ctrl_ops zoran_video_ctrl_ops = { .s_ctrl = zoran_video_set_ctrl, }; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +static int zoran_debugfs_show (struct seq_file *seq,void *v) +{ +struct zoran *zr = seq->private; + +seq_printf (seq,"Running mode %x\n" , zr->running); +seq_printf (seq,"Codec mode %x\n" , zr->codec_mode); +seq_printf (seq,"Norm %x\n" , zr->norm); +seq_printf (seq,"Input %d\n" , zr->input); +seq_printf (seq,"Buffersize %d\n" , zr->buffer_size); + +seq_printf (seq,"V4L width %dx%d\n" , zr->v4l_settings.width, zr->v4l_settings.height); +seq_printf (seq,"V4L bytesperline %d\n" , zr->v4l_settings.bytesperline); + +seq_printf (seq,"JPG decimation %u\n" , zr->jpg_settings.decimation); +seq_printf (seq,"JPG hor_dcm %u\n" , zr->jpg_settings.hor_dcm); +seq_printf (seq,"JPG ver_dcm %u\n" , zr->jpg_settings.ver_dcm); +seq_printf (seq,"JPG tmp_dcm %u\n" , zr->jpg_settings.tmp_dcm); +seq_printf (seq,"JPG odd_even %u\n" , zr->jpg_settings.odd_even); +seq_printf (seq,"JPG crop %dx%d %d %d\n" , + zr->jpg_settings.img_x, + zr->jpg_settings.img_y, + zr->jpg_settings.img_width, + zr->jpg_settings.img_height); + +seq_printf (seq,"Prepared %u\n" , zr->prepared); +seq_printf (seq,"Queued %u\n" , zr->queued); +return 0 ; +} + +DEFINE_SHOW_ATTRIBUTE (zoran_debugfs); +#endif +/* * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory
@@ -1286,6 +1319,12 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) zr->map_mode =ZORAN_MAP_MODE_RAW ; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG + zr->dbgfs_dir =debugfs_create_dir (ZR_DEVNAME (zr),NULL ); + zr->dbgfs_file =debugfs_create_file ("debug" ,0444 , + zr->dbgfs_dir, zr, + &zoran_debugfs_fops); +#endif return 0 ; zr_detach_vfe:
Signature · 1 line
2.32.0
kernel test robot
build botRe: [PATCH 4/8] staging: media: zoran: add debugfs
I love your patch! Perhaps something to improve:
Hi Corentin,
I love your patch! Perhaps something to improve:
[auto build test WARNING on staging/staging-testing]
url: https://github.com/0day-ci/linux/commits/Corentin-Labbe/staging-media-zoran-fusion-in-one-module/20210904-031844 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 5d7d11dead3ea7191a8e8635fb718d0c3f203fe0 config: arc-allyesconfig (attached as .config) compiler: arceb-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/1e16912d8cd1602ddb54f3e43e17021b8daf4e58
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Corentin-Labbe/staging-media-zoran-fusion-in-one-module/20210904-031844 git checkout 1e16912d8cd1602ddb54f3e43e17021b8daf4e58
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=arc
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
drivers/staging/media/zoran/zoran_card.c: In function 'zoran_debugfs_show':
>> drivers/staging/media/zoran/zoran_card.c:1061:32: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'v4l2_std_id' {aka 'long long unsigned int'} [-Wformat=]
1061 | seq_printf(seq, "Norm %x\n", zr->norm);
| ~^ ~~~~~~~~
| | |
| | v4l2_std_id {aka long long unsigned int}
| unsigned int
| %llxvim +1061 drivers/staging/media/zoran/zoran_card.c
1053
1054 #ifdef CONFIG_VIDEO_ZORAN_DEBUG
1055 static int zoran_debugfs_show(struct seq_file *seq, void *v)
1056 {
1057 struct zoran *zr = seq->private;
1058
1059 seq_printf(seq, "Running mode %x\n", zr->running);
1060 seq_printf(seq, "Codec mode %x\n", zr->codec_mode);
> 1061 seq_printf(seq, "Norm %x\n", zr->norm);
1062 seq_printf(seq, "Input %d\n", zr->input);
1063 seq_printf(seq, "Buffersize %d\n", zr->buffer_size);
1064
1065 seq_printf(seq, "V4L width %dx%d\n", zr->v4l_settings.width, zr->v4l_settings.height);
1066 seq_printf(seq, "V4L bytesperline %d\n", zr->v4l_settings.bytesperline);
1067
1068 seq_printf(seq, "JPG decimation %u\n", zr->jpg_settings.decimation);
1069 seq_printf(seq, "JPG hor_dcm %u\n", zr->jpg_settings.hor_dcm);
1070 seq_printf(seq, "JPG ver_dcm %u\n", zr->jpg_settings.ver_dcm);
1071 seq_printf(seq, "JPG tmp_dcm %u\n", zr->jpg_settings.tmp_dcm);
1072 seq_printf(seq, "JPG odd_even %u\n", zr->jpg_settings.odd_even);
1073 seq_printf(seq, "JPG crop %dx%d %d %d\n",
1074 zr->jpg_settings.img_x,
1075 zr->jpg_settings.img_y,
1076 zr->jpg_settings.img_width,
1077 zr->jpg_settings.img_height);
1078
1079 seq_printf(seq, "Prepared %u\n", zr->prepared);
1080 seq_printf(seq, "Queued %u\n", zr->queued);
1081 return 0;
1082 }
1083
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Greg KH
maintainerRe: [PATCH 4/8] staging: media: zoran: add debugfs
In reply to Corentin LabbeQuoted 40 lines · Corentin Labbe
Add debugfs for displaying zoran debug and stats information.
Signed-off-by Corentin Labbe <[email protected]>--- drivers/staging/media/zoran/Kconfig | 10 ++++++ drivers/staging/media/zoran/zoran.h | 5 +++ drivers/staging/media/zoran/zoran_card.c | 39 ++++++++++++++++++++++++ 3 files changed, 54 insertions(+)drivers/staging/media/zoran/Kconfig +10
-0@@ -74,3 +74,13 @@ config VIDEO_ZORAN_AVS6EYES select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT help Support for the AverMedia 6 Eyes video surveillance card. + +config VIDEO_ZORAN_DEBUG + bool "Enable zoran debugfs" + depends on VIDEO_ZORAN + depends on DEBUG_FS + help + Say y to enable zoran debug file. + This will create /sys/kernel/debug/CARD_NAME/debug for displaying + stats and debug information. +drivers/staging/media/zoran/zoran.h +1
-0@@ -18,6 +18,7 @@#ifndef _BUZ_H_#define _BUZ_H_ +#include <linux/debugfs.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> #include <media/videobuf2-core.h>
drivers/staging/media/zoran/zoran.h struct zoran { · line 301
Quoted 6 lines
drivers/staging/media/zoran/zoran.h +3
-0@@ -295,6 +296,10 @@ struct zoran {struct list_head queued_bufs;spinlock_t queued_bufs_lock;/* Protects queued_bufs */ struct zr_buffer *inuse[BUZ_NUM_STAT_COM *2 ]; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +struct dentry *dbgfs_dir; +struct dentry *dbgfs_file;
No need for these, the file is never referenced and the directory can be looked up when you want to remove it.
Quoted 49 lines
drivers/staging/media/zoran/zoran.h +1
-0+#endif };static inline struct zoran *to_zoran (struct v4l2_device *v4l2_dev)drivers/staging/media/zoran/zoran_card.c +33
-0@@ -1051,6 +1051,39 @@ static const struct v4l2_ctrl_ops zoran_video_ctrl_ops = { .s_ctrl = zoran_video_set_ctrl, }; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +static int zoran_debugfs_show (struct seq_file *seq,void *v) +{ +struct zoran *zr = seq->private; + +seq_printf (seq,"Running mode %x\n" , zr->running); +seq_printf (seq,"Codec mode %x\n" , zr->codec_mode); +seq_printf (seq,"Norm %x\n" , zr->norm); +seq_printf (seq,"Input %d\n" , zr->input); +seq_printf (seq,"Buffersize %d\n" , zr->buffer_size); + +seq_printf (seq,"V4L width %dx%d\n" , zr->v4l_settings.width, zr->v4l_settings.height); +seq_printf (seq,"V4L bytesperline %d\n" , zr->v4l_settings.bytesperline); + +seq_printf (seq,"JPG decimation %u\n" , zr->jpg_settings.decimation); +seq_printf (seq,"JPG hor_dcm %u\n" , zr->jpg_settings.hor_dcm); +seq_printf (seq,"JPG ver_dcm %u\n" , zr->jpg_settings.ver_dcm); +seq_printf (seq,"JPG tmp_dcm %u\n" , zr->jpg_settings.tmp_dcm); +seq_printf (seq,"JPG odd_even %u\n" , zr->jpg_settings.odd_even); +seq_printf (seq,"JPG crop %dx%d %d %d\n" , + zr->jpg_settings.img_x, + zr->jpg_settings.img_y, + zr->jpg_settings.img_width, + zr->jpg_settings.img_height); + +seq_printf (seq,"Prepared %u\n" , zr->prepared); +seq_printf (seq,"Queued %u\n" , zr->queued); +return 0 ; +} + +DEFINE_SHOW_ATTRIBUTE (zoran_debugfs); +#endif +/* * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory
drivers/staging/media/zoran/zoran_card.c static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) · line 1327
Quoted 9 lines
drivers/staging/media/zoran/zoran_card.c +6
-0@@ -1286,6 +1319,12 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) zr->map_mode =ZORAN_MAP_MODE_RAW ; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG + zr->dbgfs_dir =debugfs_create_dir (ZR_DEVNAME (zr),NULL ); + zr->dbgfs_file =debugfs_create_file ("debug" ,0444 , + zr->dbgfs_dir, zr, + &zoran_debugfs_fops); +#endif
Wait, when are you removing the files when the device is removed?
That needs to be fixed no matter what before this patch is accepted.
thanks,
greg k-h
Re: [PATCH 4/8] staging: media: zoran: add debugfs
Quoted 18 lines · Greg KH
drivers/staging/media/zoran/zoran.h struct zoran { · line 301
Quoted 12 lines · Corentin Labbe
Add debugfs for displaying zoran debug and stats information.
Signed-off-by Corentin Labbe <[email protected]>--- drivers/staging/media/zoran/Kconfig | 10 ++++++ drivers/staging/media/zoran/zoran.h | 5 +++ drivers/staging/media/zoran/zoran_card.c | 39 ++++++++++++++++++++++++ 3 files changed, 54 insertions(+)drivers/staging/media/zoran/zoran.h +3
-0+#ifdef CONFIG_VIDEO_ZORAN_DEBUG +struct dentry *dbgfs_dir; +struct dentry *dbgfs_file;No need for these, the file is never referenced and the directory can be looked up when you want to remove it.
Quoted 1 line
+#endif
[...]
Quoted 11 lines
drivers/staging/media/zoran/zoran_card.c static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) · line 1327
Quoted 6 lines
drivers/staging/media/zoran/zoran_card.c +6
-0+#ifdef CONFIG_VIDEO_ZORAN_DEBUG + zr->dbgfs_dir =debugfs_create_dir (ZR_DEVNAME (zr),NULL ); + zr->dbgfs_file =debugfs_create_file ("debug" ,0444 , + zr->dbgfs_dir, zr, + &zoran_debugfs_fops); +#endif Wait, when are you removing the files when the device is removed?
That needs to be fixed no matter what before this patch is accepted.
Hello
Sorry to have forgotten this.
I will fix this.
Thanks
Regards
kernel test robot
build botRe: [PATCH 4/8] staging: media: zoran: add debugfs
In reply to Corentin LabbeI love your patch! Perhaps something to improve:
Hi Corentin,
I love your patch! Perhaps something to improve:
[auto build test WARNING on staging/staging-testing]
url: https://github.com/0day-ci/linux/commits/Corentin-Labbe/staging-media-zoran-fusion-in-one-module/20210904-031844 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git 5d7d11dead3ea7191a8e8635fb718d0c3f203fe0 config: x86_64-randconfig-r023-20210904 (attached as .config) compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project 1104e3258b5064e7110cc297e2cec60ac9acfc0a)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/1e16912d8cd1602ddb54f3e43e17021b8daf4e58
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Corentin-Labbe/staging-media-zoran-fusion-in-one-module/20210904-031844 git checkout 1e16912d8cd1602ddb54f3e43e17021b8daf4e58
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> drivers/staging/media/zoran/zoran_card.c:1061:31: warning: format specifies type 'unsigned int' but the argument has type 'v4l2_std_id' (aka 'unsigned long long') [-Wformat]
seq_printf(seq, "Norm %x\n", zr->norm);
~~ ^~~~~~~~
%llx1 warning generated.
vim +1061 drivers/staging/media/zoran/zoran_card.c
1053
1054 #ifdef CONFIG_VIDEO_ZORAN_DEBUG
1055 static int zoran_debugfs_show(struct seq_file *seq, void *v)
1056 {
1057 struct zoran *zr = seq->private;
1058
1059 seq_printf(seq, "Running mode %x\n", zr->running);
1060 seq_printf(seq, "Codec mode %x\n", zr->codec_mode);
> 1061 seq_printf(seq, "Norm %x\n", zr->norm);
1062 seq_printf(seq, "Input %d\n", zr->input);
1063 seq_printf(seq, "Buffersize %d\n", zr->buffer_size);
1064
1065 seq_printf(seq, "V4L width %dx%d\n", zr->v4l_settings.width, zr->v4l_settings.height);
1066 seq_printf(seq, "V4L bytesperline %d\n", zr->v4l_settings.bytesperline);
1067
1068 seq_printf(seq, "JPG decimation %u\n", zr->jpg_settings.decimation);
1069 seq_printf(seq, "JPG hor_dcm %u\n", zr->jpg_settings.hor_dcm);
1070 seq_printf(seq, "JPG ver_dcm %u\n", zr->jpg_settings.ver_dcm);
1071 seq_printf(seq, "JPG tmp_dcm %u\n", zr->jpg_settings.tmp_dcm);
1072 seq_printf(seq, "JPG odd_even %u\n", zr->jpg_settings.odd_even);
1073 seq_printf(seq, "JPG crop %dx%d %d %d\n",
1074 zr->jpg_settings.img_x,
1075 zr->jpg_settings.img_y,
1076 zr->jpg_settings.img_width,
1077 zr->jpg_settings.img_height);
1078
1079 seq_printf(seq, "Prepared %u\n", zr->prepared);
1080 seq_printf(seq, "Queued %u\n", zr->queued);
1081 return 0;
1082 }
1083
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Re: [PATCH 4/8] staging: media: zoran: add debugfs
In reply to Corentin LabbeQuoted 56 lines · Corentin Labbe
Add debugfs for displaying zoran debug and stats information.
Signed-off-by Corentin Labbe <[email protected]>--- drivers/staging/media/zoran/Kconfig | 10 ++++++ drivers/staging/media/zoran/zoran.h | 5 +++ drivers/staging/media/zoran/zoran_card.c | 39 ++++++++++++++++++++++++ 3 files changed, 54 insertions(+)drivers/staging/media/zoran/Kconfig +10
-0@@ -74,3 +74,13 @@ config VIDEO_ZORAN_AVS6EYES select VIDEO_KS0127 if MEDIA_SUBDRV_AUTOSELECT help Support for the AverMedia 6 Eyes video surveillance card. + +config VIDEO_ZORAN_DEBUG + bool "Enable zoran debugfs" + depends on VIDEO_ZORAN + depends on DEBUG_FS + help + Say y to enable zoran debug file. + This will create /sys/kernel/debug/CARD_NAME/debug for displaying + stats and debug information. +drivers/staging/media/zoran/zoran.h +5
-0@@ -18,6 +18,7 @@#ifndef _BUZ_H_#define _BUZ_H_ +#include <linux/debugfs.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> #include <media/videobuf2-core.h> @@ -295,6 +296,10 @@ struct zoran {struct list_head queued_bufs;spinlock_t queued_bufs_lock;/* Protects queued_bufs */ struct zr_buffer *inuse[BUZ_NUM_STAT_COM *2 ]; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +struct dentry *dbgfs_dir; +struct dentry *dbgfs_file; +#endif };static inline struct zoran *to_zoran (struct v4l2_device *v4l2_dev)drivers/staging/media/zoran/zoran_card.c +0
-0@@ -1051,6 +1051,39 @@ static const struct v4l2_ctrl_ops zoran_video_ctrl_ops = { .s_ctrl = zoran_video_set_ctrl,
drivers/staging/media/zoran/zoran_card.c static const struct v4l2_ctrl_ops zoran_video_ctrl_ops = { · line 1061
Quoted 10 lines
drivers/staging/media/zoran/zoran_card.c +8
-0}; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +static int zoran_debugfs_show (struct seq_file *seq,void *v) +{ +struct zoran *zr = seq->private; + +seq_printf (seq,"Running mode %x\n" , zr->running); +seq_printf (seq,"Codec mode %x\n" , zr->codec_mode); +seq_printf (seq,"Norm %x\n" , zr->norm);
This should be %llx, otherwise you get a compile warning.
Regards,
Hans
Quoted 42 lines
drivers/staging/media/zoran/zoran_card.c +31
-0+seq_printf (seq,"Input %d\n" , zr->input); +seq_printf (seq,"Buffersize %d\n" , zr->buffer_size); + +seq_printf (seq,"V4L width %dx%d\n" , zr->v4l_settings.width, zr->v4l_settings.height); +seq_printf (seq,"V4L bytesperline %d\n" , zr->v4l_settings.bytesperline); + +seq_printf (seq,"JPG decimation %u\n" , zr->jpg_settings.decimation); +seq_printf (seq,"JPG hor_dcm %u\n" , zr->jpg_settings.hor_dcm); +seq_printf (seq,"JPG ver_dcm %u\n" , zr->jpg_settings.ver_dcm); +seq_printf (seq,"JPG tmp_dcm %u\n" , zr->jpg_settings.tmp_dcm); +seq_printf (seq,"JPG odd_even %u\n" , zr->jpg_settings.odd_even); +seq_printf (seq,"JPG crop %dx%d %d %d\n" , + zr->jpg_settings.img_x, + zr->jpg_settings.img_y, + zr->jpg_settings.img_width, + zr->jpg_settings.img_height); + +seq_printf (seq,"Prepared %u\n" , zr->prepared); +seq_printf (seq,"Queued %u\n" , zr->queued); + return 0; +} + +DEFINE_SHOW_ATTRIBUTE (zoran_debugfs); +#endif +/* * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory @@ -1286,6 +1319,12 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) zr->map_mode =ZORAN_MAP_MODE_RAW ; +#ifdef CONFIG_VIDEO_ZORAN_DEBUG + zr->dbgfs_dir =debugfs_create_dir (ZR_DEVNAME (zr),NULL ); + zr->dbgfs_file =debugfs_create_file ("debug" ,0444 , + zr->dbgfs_dir, zr, + &zoran_debugfs_fops); +#endif return 0 ; zr_detach_vfe:
PATCH 5/8 staging: media: zoran: videocode: remove procfs
In reply to Corentin LabbeNow we have a debugfs, we can remove all PROCFS stuff. We keep videocodec_debugfs_show(), it will be used later
--- drivers/staging/media/zoran/videocodec.c | 24 ++---------------------- drivers/staging/media/zoran/videocodec.h | 5 +++++ 2 files changed, 7 insertions(+), 22 deletions(-)
drivers/staging/media/zoran/videocodec.c +2 -22
@@ -16,14 +16,6 @@#include <linux/types.h> #include <linux/slab.h> -// kernel config is here (procfs flag) - -#ifdef CONFIG_PROC_FS -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/uaccess.h> -#endif -#include "videocodec.h" static int videocodec_debug;
@@ -265,8 +257,8 @@ int videocodec_unregister(const struct videocodec *codec) }EXPORT_SYMBOL (videocodec_unregister); -#ifdef CONFIG_PROC_FS -static int proc_videocodecs_show (struct seq_file *m,void *v) +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +int videocodec_debugfs_show (struct seq_file *m) {struct codec_list *h = codeclist_top;struct attached_list *a;
@@ -300,25 +292,13 @@ static int proc_videocodecs_show(struct seq_file *m, void *v)/* ===================== */ static int __init videocodec_init (void ) { -#ifdef CONFIG_PROC_FS -static struct proc_dir_entry *videocodec_proc_entry; -#endif -pr_info ("Linux video codec intermediate layer: %s\n" ,VIDEOCODEC_VERSION ); -#ifdef CONFIG_PROC_FS - videocodec_proc_entry =proc_create_single ("videocodecs" ,0 ,NULL , proc_videocodecs_show); -if (!videocodec_proc_entry) -pr_err ("videocodec: can't init procfs.\n" ); -#endif return 0 ; } static void __exit videocodec_exit(void) { -#ifdef CONFIG_PROC_FS -remove_proc_entry ("videocodecs" ,NULL ); -#endif }module_init (videocodec_init);
drivers/staging/media/zoran/videocodec.h +5 -0
@@ -123,6 +123,7 @@ M zr36055[1] 0001 0000c001 00000000 (zr36050[1])#ifndef __LINUX_VIDEOCODEC_H#define __LINUX_VIDEOCODEC_H +#include <linux/debugfs.h> #include <linux/videodev2.h> #define CODEC_DO_COMPRESSION 0
@@ -305,4 +306,8 @@ extern int videocodec_unregister(const struct videocodec *);/* the other calls are directly done via the videocodec structure! */ +#ifdef CONFIG_VIDEO_ZORAN_DEBUG +int videocodec_debugfs_show (struct seq_file *m); +#endif +#endif /*ifndef __LINUX_VIDEOCODEC_H */
Signature · 1 line
2.32.0
PATCH 6/8 staging: media: zoran: fusion all modules
In reply to Corentin LabbeThe zoran driver is split in many modules, but this lead to some problems.
One of them is that load order is incorrect when everything is built-in.
Having more than one module is useless, so fusion all zoran modules in one.
--- drivers/staging/media/zoran/Kconfig | 14 +++---- drivers/staging/media/zoran/Makefile | 8 ++-- drivers/staging/media/zoran/videocodec.c | 28 -------------- drivers/staging/media/zoran/zoran_card.c | 48 +++++++++++++++++++++--- drivers/staging/media/zoran/zr36016.c | 11 +----- drivers/staging/media/zoran/zr36016.h | 2 + drivers/staging/media/zoran/zr36050.c | 12 +----- drivers/staging/media/zoran/zr36050.h | 2 + drivers/staging/media/zoran/zr36060.c | 11 +----- drivers/staging/media/zoran/zr36060.h | 2 + 10 files changed, 66 insertions(+), 72 deletions(-)
drivers/staging/media/zoran/Kconfig +7 -7
@@ -14,7 +14,7 @@ config VIDEO_ZORAN module will be called zr36067. config VIDEO_ZORAN_DC30 - tristate "Pinnacle/Miro DC30(+) support" + bool "Pinnacle/Miro DC30(+) support" depends on VIDEO_ZORAN select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_VPX3220 if MEDIA_SUBDRV_AUTOSELECT
@@ -24,7 +24,7 @@ config VIDEO_ZORAN_DC30 zr36050 MJPEG codec and zr36016 VFE. config VIDEO_ZORAN_ZR36060 - tristate "Zoran ZR36060" + bool "Zoran ZR36060" depends on VIDEO_ZORAN help Say Y to support Zoran boards based on 36060 chips.
@@ -32,7 +32,7 @@ config VIDEO_ZORAN_ZR36060 and 33 R10 and AverMedia 6 boards. config VIDEO_ZORAN_BUZ - tristate "Iomega Buz support" + bool "Iomega Buz support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT select VIDEO_SAA7185 if MEDIA_SUBDRV_AUTOSELECT
@@ -40,7 +40,7 @@ config VIDEO_ZORAN_BUZ Support for the Iomega Buz MJPEG capture/playback card. config VIDEO_ZORAN_DC10 - tristate "Pinnacle/Miro DC10(+) support" + bool "Pinnacle/Miro DC10(+) support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_SAA7110 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT
@@ -49,7 +49,7 @@ config VIDEO_ZORAN_DC10 card. config VIDEO_ZORAN_LML33 - tristate "Linux Media Labs LML33 support" + bool "Linux Media Labs LML33 support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_BT819 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT
@@ -58,7 +58,7 @@ config VIDEO_ZORAN_LML33 card. config VIDEO_ZORAN_LML33R10 - tristate "Linux Media Labs LML33R10 support" + bool "Linux Media Labs LML33R10 support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT select VIDEO_ADV7170 if MEDIA_SUBDRV_AUTOSELECT
@@ -67,7 +67,7 @@ config VIDEO_ZORAN_LML33R10 card. config VIDEO_ZORAN_AVS6EYES - tristate "AverMedia 6 Eyes support" + bool "AverMedia 6 Eyes support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_BT866 if MEDIA_SUBDRV_AUTOSELECT
drivers/staging/media/zoran/Makefile +4 -4
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 zr36067-objs := zoran_device.o \ - zoran_driver.o zoran_card.o + zoran_driver.o zoran_card.o videocodec.o -obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o -obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o -obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o +obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o +zr36067-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o +zr36067-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o
drivers/staging/media/zoran/videocodec.c +0 -28
@@ -8,8 +8,6 @@* (c) 2002 Wolfgang Scherr <[email protected]> */ -#define VIDEOCODEC_VERSION "v0.2" -#include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h>
@@ -119,7 +117,6 @@ struct videocodec *videocodec_attach(struct videocodec_master *master)kfree (codec);return NULL ; } -EXPORT_SYMBOL (videocodec_attach);int videocodec_detach (struct videocodec *codec) {
@@ -175,7 +172,6 @@ int videocodec_detach(struct videocodec *codec)pr_err ("%s: given codec not found!\n" , __func__);return -EINVAL ; } -EXPORT_SYMBOL (videocodec_detach);int videocodec_register (const struct videocodec *codec) {
@@ -208,7 +204,6 @@ int videocodec_register(const struct videocodec *codec)return 0 ; } -EXPORT_SYMBOL (videocodec_register);int videocodec_unregister (const struct videocodec *codec) {
@@ -255,7 +250,6 @@ int videocodec_unregister(const struct videocodec *codec)pr_err ("%s: given codec not found!\n" , __func__);return -EINVAL ; } -EXPORT_SYMBOL (videocodec_unregister);#ifdef CONFIG_VIDEO_ZORAN_DEBUG int videocodec_debugfs_show (struct seq_file *m)
@@ -286,25 +280,3 @@ int videocodec_debugfs_show(struct seq_file *m) return 0; }#endif - -/* ===================== */ -/* hook in driver module */ -/* ===================== */ -static int __init videocodec_init (void ) -{ -pr_info ("Linux video codec intermediate layer: %s\n" ,VIDEOCODEC_VERSION ); - -return 0 ; -} - -static void __exit videocodec_exit(void) -{ -} - -module_init (videocodec_init); -module_exit (videocodec_exit); - -MODULE_AUTHOR ("Wolfgang Scherr <[email protected]>" ); -MODULE_DESCRIPTION ("Intermediate API module for video codecs " -VIDEOCODEC_VERSION ); -MODULE_LICENSE ("GPL" );
drivers/staging/media/zoran/zoran_card.c +43 -5
78 lines not on this page · raw message
drivers/staging/media/zoran/zr36016.c +2 -9
@@ -409,14 +409,14 @@ static const struct videocodec zr36016_codec = {HOOK IN DRIVER AS KERNEL MODULE ========================================================================= */ -static int __init zr36016_init_module (void ) +int zr36016_init_module (void ) {//dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION); zr36016_codecs =0 ;return videocodec_register (&zr36016_codec); } -static void __exit zr36016_cleanup_module(void) +void zr36016_cleanup_module (void ) {if (zr36016_codecs) { dprintk(1,
@@ -425,10 +425,3 @@ static void __exit zr36016_cleanup_module(void) }videocodec_unregister (&zr36016_codec); } - -module_init (zr36016_init_module); -module_exit (zr36016_cleanup_module); - -MODULE_AUTHOR ("Wolfgang Scherr <[email protected]>" ); -MODULE_DESCRIPTION ("Driver module for ZR36016 video frontends" ); -MODULE_LICENSE ("GPL" );
drivers/staging/media/zoran/zr36016.h +2 -0
@@ -89,4 +89,6 @@ struct zr36016 {#define ZR016_SIGN 0x02#define ZR016_YMCS 0x01 +int zr36016_init_module (void ); +void zr36016_cleanup_module (void );#endif /*fndef ZR36016_H */
drivers/staging/media/zoran/zr36050.c +2 -10
@@ -817,14 +817,14 @@ static const struct videocodec zr36050_codec = {HOOK IN DRIVER AS KERNEL MODULE ========================================================================= */ -static int __init zr36050_init_module (void ) +int zr36050_init_module (void ) {//dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION); zr36050_codecs =0 ;return videocodec_register (&zr36050_codec); } -static void __exit zr36050_cleanup_module(void) +void zr36050_cleanup_module (void ) {if (zr36050_codecs) { dprintk(1,
@@ -833,11 +833,3 @@ static void __exit zr36050_cleanup_module(void) }videocodec_unregister (&zr36050_codec); } - -module_init (zr36050_init_module); -module_exit (zr36050_cleanup_module); - -MODULE_AUTHOR ("Wolfgang Scherr <[email protected]>" ); -MODULE_DESCRIPTION ("Driver module for ZR36050 jpeg processors " -ZR050_VERSION ); -MODULE_LICENSE ("GPL" );
drivers/staging/media/zoran/zr36050.h +2 -0
@@ -160,4 +160,6 @@ struct zr36050 {#define ZR050_U_COMPONENT 1#define ZR050_V_COMPONENT 2 +int zr36050_init_module (void ); +void zr36050_cleanup_module (void );#endif /*fndef ZR36050_H */
drivers/staging/media/zoran/zr36060.c +2 -9
@@ -846,13 +846,13 @@ static const struct videocodec zr36060_codec = {// others are not used }; -static int __init zr36060_init_module (void ) +int zr36060_init_module (void ) { zr36060_codecs =0 ;return videocodec_register (&zr36060_codec); } -static void __exit zr36060_cleanup_module(void) +void zr36060_cleanup_module (void ) {if (zr36060_codecs) { dprintk(1,
@@ -863,10 +863,3 @@ static void __exit zr36060_cleanup_module(void)/* however, we can't just stay alive */ videocodec_unregister (&zr36060_codec); } - -module_init (zr36060_init_module); -module_exit (zr36060_cleanup_module); - -MODULE_AUTHOR ("Laurent Pinchart <[email protected]>" ); -MODULE_DESCRIPTION ("Driver module for ZR36060 jpeg processors " ZR060_VERSION ); -MODULE_LICENSE ("GPL" );
drivers/staging/media/zoran/zr36060.h +2 -0
@@ -198,4 +198,6 @@ struct zr36060 {#define ZR060_SR_H_SCALE2 BIT(0)#define ZR060_SR_H_SCALE4 (2 << 0) +int zr36060_init_module (void ); +void zr36060_cleanup_module (void );#endif /*fndef ZR36060_H */
Signature · 1 line
2.32.0
Re: [PATCH 6/8] staging: media: zoran: fusion all modules
Quoted 6 lines · Corentin Labbe
The zoran driver is split in many modules, but this lead to some problems.
One of them is that load order is incorrect when everything is built-in.Having more than one module is useless, so fusion all zoran modules in one.
After applying this patch I am no longer able to rmmod the module: it will always report that it is in use. This is with a Miro DC30.
So something is wrong with refcounting.
I do like the idea of merging all these modules, but it needs a bit more testing.
Regards,
Hans
Quoted 385 lines
Signed-off-by Corentin Labbe <[email protected]>--- drivers/staging/media/zoran/Kconfig | 14 +++---- drivers/staging/media/zoran/Makefile | 8 ++-- drivers/staging/media/zoran/videocodec.c | 28 -------------- drivers/staging/media/zoran/zoran_card.c | 48 +++++++++++++++++++++--- drivers/staging/media/zoran/zr36016.c | 11 +----- drivers/staging/media/zoran/zr36016.h | 2 + drivers/staging/media/zoran/zr36050.c | 12 +----- drivers/staging/media/zoran/zr36050.h | 2 + drivers/staging/media/zoran/zr36060.c | 11 +----- drivers/staging/media/zoran/zr36060.h | 2 + 10 files changed, 66 insertions(+), 72 deletions(-)drivers/staging/media/zoran/Kconfig +7
-7@@ -14,7 +14,7 @@ config VIDEO_ZORAN module will be called zr36067. config VIDEO_ZORAN_DC30 - tristate "Pinnacle/Miro DC30(+) support" + bool "Pinnacle/Miro DC30(+) support" depends on VIDEO_ZORAN select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_VPX3220 if MEDIA_SUBDRV_AUTOSELECT@@ -24,7 +24,7 @@ config VIDEO_ZORAN_DC30 zr36050 MJPEG codec and zr36016 VFE. config VIDEO_ZORAN_ZR36060 - tristate "Zoran ZR36060" + bool "Zoran ZR36060" depends on VIDEO_ZORAN help Say Y to support Zoran boards based on 36060 chips.@@ -32,7 +32,7 @@ config VIDEO_ZORAN_ZR36060 and 33 R10 and AverMedia 6 boards. config VIDEO_ZORAN_BUZ - tristate "Iomega Buz support" + bool "Iomega Buz support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT select VIDEO_SAA7185 if MEDIA_SUBDRV_AUTOSELECT@@ -40,7 +40,7 @@ config VIDEO_ZORAN_BUZ Support for the Iomega Buz MJPEG capture/playback card. config VIDEO_ZORAN_DC10 - tristate "Pinnacle/Miro DC10(+) support" + bool "Pinnacle/Miro DC10(+) support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_SAA7110 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_ADV7175 if MEDIA_SUBDRV_AUTOSELECT@@ -49,7 +49,7 @@ config VIDEO_ZORAN_DC10 card. config VIDEO_ZORAN_LML33 - tristate "Linux Media Labs LML33 support" + bool "Linux Media Labs LML33 support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_BT819 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT@@ -58,7 +58,7 @@ config VIDEO_ZORAN_LML33 card. config VIDEO_ZORAN_LML33R10 - tristate "Linux Media Labs LML33R10 support" + bool "Linux Media Labs LML33R10 support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT select VIDEO_ADV7170 if MEDIA_SUBDRV_AUTOSELECT@@ -67,7 +67,7 @@ config VIDEO_ZORAN_LML33R10 card. config VIDEO_ZORAN_AVS6EYES - tristate "AverMedia 6 Eyes support" + bool "AverMedia 6 Eyes support" depends on VIDEO_ZORAN_ZR36060 select VIDEO_BT856 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_BT866 if MEDIA_SUBDRV_AUTOSELECTdrivers/staging/media/zoran/Makefile +4
-4@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 zr36067-objs := zoran_device.o \ - zoran_driver.o zoran_card.o + zoran_driver.o zoran_card.o videocodec.o -obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o -obj-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o -obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o +obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o +zr36067-$(CONFIG_VIDEO_ZORAN_DC30) += zr36050.o zr36016.o +zr36067-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.odrivers/staging/media/zoran/videocodec.c +0
-28@@ -8,8 +8,6 @@* (c) 2002 Wolfgang Scherr <[email protected]> */ -#define VIDEOCODEC_VERSION "v0.2" -#include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -119,7 +117,6 @@ struct videocodec *videocodec_attach(struct videocodec_master *master)kfree (codec);return NULL ; } -EXPORT_SYMBOL (videocodec_attach);int videocodec_detach (struct videocodec *codec) {@@ -175,7 +172,6 @@ int videocodec_detach(struct videocodec *codec)pr_err ("%s: given codec not found!\n" , __func__);return -EINVAL ; } -EXPORT_SYMBOL (videocodec_detach);int videocodec_register (const struct videocodec *codec) {@@ -208,7 +204,6 @@ int videocodec_register(const struct videocodec *codec)return 0 ; } -EXPORT_SYMBOL (videocodec_register);int videocodec_unregister (const struct videocodec *codec) {@@ -255,7 +250,6 @@ int videocodec_unregister(const struct videocodec *codec)pr_err ("%s: given codec not found!\n" , __func__);return -EINVAL ; } -EXPORT_SYMBOL (videocodec_unregister);#ifdef CONFIG_VIDEO_ZORAN_DEBUG int videocodec_debugfs_show (struct seq_file *m)@@ -286,25 +280,3 @@ int videocodec_debugfs_show(struct seq_file *m) return 0; }#endif - -/* ===================== */ -/* hook in driver module */ -/* ===================== */ -static int __init videocodec_init (void ) -{ -pr_info ("Linux video codec intermediate layer: %s\n" ,VIDEOCODEC_VERSION ); - -return 0 ; -} - -static void __exit videocodec_exit(void) -{ -} - -module_init (videocodec_init); -module_exit (videocodec_exit); - -MODULE_AUTHOR ("Wolfgang Scherr <[email protected]>" ); -MODULE_DESCRIPTION ("Intermediate API module for video codecs " -VIDEOCODEC_VERSION ); -MODULE_LICENSE ("GPL" );drivers/staging/media/zoran/zoran_card.c +43
-5@@ -29,6 +29,9 @@#include "zoran.h" #include "zoran_card.h" #include "zoran_device.h" +#include "zr36016.h" +#include "zr36050.h" +#include "zr36060.h" extern const struct zoran_format zoran_formats[];@@ -266,6 +269,39 @@ static const char *codecid_to_modulename(u16 codecid)return name; } +static int load_codec (struct zoran *zr,u16 codecid) +{ +switch (codecid) { +case CODEC_TYPE_ZR36060 : +#ifdef CONFIG_VIDEO_ZORAN_ZR36060 +return zr36060_init_module (); +#else +pci_err (zr->pci_dev,"ZR36060 support is not enabled\n" ); +return -EINVAL ; +#endif +break ; +case CODEC_TYPE_ZR36050 : +#ifdef CONFIG_VIDEO_ZORAN_DC30 +return zr36050_init_module (); +#else +pci_err (zr->pci_dev,"ZR36050 support is not enabled\n" ); +return -EINVAL ; +#endif +break ; +case CODEC_TYPE_ZR36016 : +#ifdef CONFIG_VIDEO_ZORAN_DC30 +return zr36016_init_module (); +#else +pci_err (zr->pci_dev,"ZR36016 support is not enabled\n" ); +return -EINVAL ; +#endif +break ; + } + +pci_err (zr->pci_dev,"unknown codec id %x\n" , codecid); +return -EINVAL ; +} +// struct tvnorm { // u16 wt, wa, h_start, h_sync_start, ht, ha, v_start; // }; @@ -1078,6 +1114,8 @@ static int zoran_debugfs_show(struct seq_file *seq, void *v)seq_printf (seq,"Prepared %u\n" , zr->prepared);seq_printf (seq,"Queued %u\n" , zr->queued); + +videocodec_debugfs_show (seq);return 0 ; }@@ -1262,17 +1300,17 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (zr->card.video_codec) { codec_name =codecid_to_modulename (zr->card.video_codec);if (codec_name) { - result =request_module (codec_name); -if (result) -pci_err (pdev,"failed to load modules %s: %d\n" , codec_name, result); + result =load_codec (zr, zr->card.video_codec); +if (result <0 ) +pci_err (pdev,"failed to load codec %s: %d\n" , codec_name, result); } }if (zr->card.video_vfe) { vfe_name =codecid_to_modulename (zr->card.video_vfe);if (vfe_name) { - result =request_module (vfe_name); + result =load_codec (zr, zr->card.video_vfe);if (result <0 ) -pci_err (pdev,"failed to load modules %s: %d\n" , vfe_name, result); +pci_err (pdev,"failed to load codec %s: %d\n" , vfe_name, result); } }drivers/staging/media/zoran/zr36016.c +2
-9@@ -409,14 +409,14 @@ static const struct videocodec zr36016_codec = {HOOK IN DRIVER AS KERNEL MODULE ========================================================================= */ -static int __init zr36016_init_module (void ) +int zr36016_init_module (void ) {//dprintk(1, "ZR36016 driver %s\n",ZR016_VERSION); zr36016_codecs =0 ;return videocodec_register (&zr36016_codec); } -static void __exit zr36016_cleanup_module(void) +void zr36016_cleanup_module (void ) {if (zr36016_codecs) { dprintk(1,@@ -425,10 +425,3 @@ static void __exit zr36016_cleanup_module(void) }videocodec_unregister (&zr36016_codec); } - -module_init (zr36016_init_module); -module_exit (zr36016_cleanup_module); - -MODULE_AUTHOR ("Wolfgang Scherr <[email protected]>" ); -MODULE_DESCRIPTION ("Driver module for ZR36016 video frontends" ); -MODULE_LICENSE ("GPL" );drivers/staging/media/zoran/zr36016.h +2
-0@@ -89,4 +89,6 @@ struct zr36016 {#define ZR016_SIGN 0x02#define ZR016_YMCS 0x01 +int zr36016_init_module (void ); +void zr36016_cleanup_module (void );#endif /*fndef ZR36016_H */ drivers/staging/media/zoran/zr36050.c +2
-10@@ -817,14 +817,14 @@ static const struct videocodec zr36050_codec = {HOOK IN DRIVER AS KERNEL MODULE ========================================================================= */ -static int __init zr36050_init_module (void ) +int zr36050_init_module (void ) {//dprintk(1, "ZR36050 driver %s\n",ZR050_VERSION); zr36050_codecs =0 ;return videocodec_register (&zr36050_codec); } -static void __exit zr36050_cleanup_module(void) +void zr36050_cleanup_module (void ) {if (zr36050_codecs) { dprintk(1,@@ -833,11 +833,3 @@ static void __exit zr36050_cleanup_module(void) }videocodec_unregister (&zr36050_codec); } - -module_init (zr36050_init_module); -module_exit (zr36050_cleanup_module); - -MODULE_AUTHOR ("Wolfgang Scherr <[email protected]>" ); -MODULE_DESCRIPTION ("Driver module for ZR36050 jpeg processors " -ZR050_VERSION ); -MODULE_LICENSE ("GPL" );drivers/staging/media/zoran/zr36050.h +2
-0@@ -160,4 +160,6 @@ struct zr36050 {#define ZR050_U_COMPONENT 1#define ZR050_V_COMPONENT 2 +int zr36050_init_module (void ); +void zr36050_cleanup_module (void );#endif /*fndef ZR36050_H */ drivers/staging/media/zoran/zr36060.c +2
-9@@ -846,13 +846,13 @@ static const struct videocodec zr36060_codec = {// others are not used }; -static int __init zr36060_init_module (void ) +int zr36060_init_module (void ) { zr36060_codecs =0 ;return videocodec_register (&zr36060_codec); } -static void __exit zr36060_cleanup_module(void) +void zr36060_cleanup_module (void ) {if (zr36060_codecs) { dprintk(1,@@ -863,10 +863,3 @@ static void __exit zr36060_cleanup_module(void)/* however, we can't just stay alive */ videocodec_unregister (&zr36060_codec); } - -module_init (zr36060_init_module); -module_exit (zr36060_cleanup_module); - -MODULE_AUTHOR ("Laurent Pinchart <[email protected]>" ); -MODULE_DESCRIPTION ("Driver module for ZR36060 jpeg processors " ZR060_VERSION ); -MODULE_LICENSE ("GPL" );drivers/staging/media/zoran/zr36060.h +2
-0@@ -198,4 +198,6 @@ struct zr36060 {#define ZR060_SR_H_SCALE2 BIT(0)#define ZR060_SR_H_SCALE4 (2 << 0) +int zr36060_init_module (void ); +void zr36060_cleanup_module (void );#endif /*fndef ZR36060_H */
Re: [PATCH 6/8] staging: media: zoran: fusion all modules
Quoted 11 lines · Hans Verkuil
Quoted 6 lines · Corentin Labbe
The zoran driver is split in many modules, but this lead to some problems.
One of them is that load order is incorrect when everything is built-in.Having more than one module is useless, so fusion all zoran modules in one.
After applying this patch I am no longer able to rmmod the module: it will always report that it is in use. This is with a Miro DC30.
Quoted 9 lines
So something is wrong with refcounting.
I do like the idea of merging all these modules, but it needs a bit more testing.
Regards,
Hans
Hello
I am sorry, I was sure to have successfully removed the zoran module a couple of time with my DC10. Anyway I just acquired a DC30, so I will test it also (even if I believe that model should not change anything).
Regards
PATCH 7/8 staging: media: zoran: remove vidmem
In reply to Corentin LabbeThe vidmem parameter is no longer necessary since we removed framebuffer support.
--- drivers/staging/media/zoran/zoran_card.c | 15 --------------- 1 file changed, 15 deletions(-)
drivers/staging/media/zoran/zoran_card.c +0 -15
@@ -39,17 +39,6 @@ static int card[BUZ_MAX] = { [0 ... (BUZ_MAX - 1)] = -1 };module_param_array (card, int,NULL ,0444 );MODULE_PARM_DESC (card,"Card type" ); -/* -* The video mem address of the video card. The driver has a little database -* for some videocards to determine it from there. If your video card is not -* in there you have either to give it to the driver as a parameter or set -* in a VIDIOCSFBUF ioctl -*/ - -static unsigned long vidmem;/* default = 0 - Video memory base address */ -module_param_hw (vidmem, ulong, iomem,0444 ); -MODULE_PARM_DESC (vidmem,"Default video memory base address" ); -/* Default input and video norm at startup of the driver. */ static unsigned int default_input;/* default 0 = Composite, 1 = S-Video */
@@ -1161,10 +1150,6 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) jpg_bufsize =8192 ;if (jpg_bufsize > (512 *1024 )) jpg_bufsize =512 *1024 ; -/* Use parameter for vidmem or try to find a video card */ -if (vidmem) -pci_info (pdev,"%s: Using supplied video memory base address @ 0x%lx\n" , -ZORAN_NAME , vidmem);/* some mainboards might not do PCI-PCI data transfer well */ if (pci_pci_problems & (PCIPCI_FAIL |PCIAGP_FAIL |PCIPCI_ALIMAGIK ))
Signature · 1 line
2.32.0
PATCH 8/8 staging: media: zoran: move videodev alloc
In reply to Corentin LabbeMove some code out of zr36057_init() and create new functions for handling zr->video_dev. This permit to ease code reading and fix a zr->video_dev memory leak.
--- drivers/staging/media/zoran/zoran.h | 2 +- drivers/staging/media/zoran/zoran_card.c | 80 ++++++++++++++-------- drivers/staging/media/zoran/zoran_driver.c | 5 +- 3 files changed, 54 insertions(+), 33 deletions(-)
drivers/staging/media/zoran/zoran.h +1 -1
@@ -318,6 +318,6 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)#endif -int zoran_queue_init (struct zoran *zr,struct vb2_queue *vq); +int zoran_queue_init (struct zoran *zr,struct vb2_queue *vq,int dir);void zoran_queue_exit (struct zoran *zr);int zr_set_buf (struct zoran *zr);
drivers/staging/media/zoran/zoran_card.c +50 -30
115 lines not on this page · raw message
drivers/staging/media/zoran/zoran_driver.c +3 -2
@@ -1008,7 +1008,7 @@ static const struct vb2_ops zr_video_qops = { .wait_finish = vb2_ops_wait_finish, }; -int zoran_queue_init (struct zoran *zr,struct vb2_queue *vq) +int zoran_queue_init (struct zoran *zr,struct vb2_queue *vq,int dir) {int err;
@@ -1016,7 +1016,8 @@ int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)INIT_LIST_HEAD (&zr->queued_bufs); vq->dev = &zr->pci_dev->dev; - vq->type =V4L2_BUF_TYPE_VIDEO_CAPTURE ; + vq->type = dir; + vq->io_modes =VB2_USERPTR |VB2_DMABUF |VB2_MMAP |VB2_READ |VB2_WRITE ; vq->drv_priv = zr; vq->buf_struct_size =sizeof (struct zr_buffer );
Signature · 1 line
2.32.0
Hi Corentin,
I finally had the opportunity to test the staging zoran driver.
I found several issues when running v4l2-compliance -s (I posted a patch for that), but more seriously is the fact that trying to capture MJPG at resolutions 384x288 or less just hangs my PC. It works OK with 768x576.
I discovered this when running 'v4l2-compliance -s -a -f'.
BTW, why isn't the initial format equal to MJPG 768x576?
I would expect that for these boards that should be the default format.
Another issue is that the TODO should mention that for video output there should be a second video device node. And that's really something that has to be done before the zoran driver can be moved out of staging.
It shouldn't be that hard to implement, I think.
Right now it is impossible to run the compliance test for the output, since it doesn't even see it as an output.
Regards,
Hans
Quoted 33 lines · Corentin Labbe
Hello
The main change of this serie is to fusion all zoran related modules in one.
This fixes the load order problem when everything is built-in.Regards
Corentin Labbe (8):
staging: media: zoran: move module parameter checks tozoran_probe
staging: media: zoran: usemodule_pci_driver
staging: media: zoran: rename debug module parameter
staging: media: zoran: add debugfs
staging: media: zoran: videocode: remove procfs
staging: media: zoran: fusion all modules
staging: media: zoran: remove vidmem
staging: media: zoran: move videodev allocdrivers/staging/media/zoran/Kconfig | 24 +- drivers/staging/media/zoran/Makefile | 8 +- drivers/staging/media/zoran/videocodec.c | 60 +---- drivers/staging/media/zoran/videocodec.h | 5 + drivers/staging/media/zoran/zoran.h | 7 +- drivers/staging/media/zoran/zoran_card.c | 259 +++++++++++++-------- drivers/staging/media/zoran/zoran_driver.c | 5 +- drivers/staging/media/zoran/zr36016.c | 23 +- drivers/staging/media/zoran/zr36016.h | 2 + drivers/staging/media/zoran/zr36050.c | 20 +- drivers/staging/media/zoran/zr36050.h | 2 + drivers/staging/media/zoran/zr36060.c | 20 +- drivers/staging/media/zoran/zr36060.h | 2 + 13 files changed, 229 insertions(+), 208 deletions(-)
Quoted 17 lines · Hans Verkuil
Hi Corentin,
I finally had the opportunity to test the staging zoran driver.
I found several issues when running v4l2-compliance -s (I posted a patch for that), but more seriously is the fact that trying to capture MJPG at resolutions 384x288 or less just hangs my PC. It works OK with 768x576.
I discovered this when running 'v4l2-compliance -s -a -f'.
BTW, why isn't the initial format equal to MJPG 768x576?
I would expect that for these boards that should be the default format.Another issue is that the TODO should mention that for video output there should be a second video device node. And that's really something that has to be done before the zoran driver can be moved out of staging.
Quoted 8 lines
It shouldn't be that hard to implement, I think.
Right now it is impossible to run the compliance test for the output, since it doesn't even see it as an output.
Regards,
Hans
I work on having a second device for output, (it is the reason of "staging: media: zoran: move videodev alloc" which will help).
But I still have the problem of non working output.
Does output is really needed for going out of staging ?
Probably nobody have it working for ages. The only way to had it was to use an old mplayer output which is broken since so many time. Note that this plugin will never work again.
The only way to work on output is to use ffmpeg which just recently have suport for writing non-raw video to V4L.
Regards
Quoted 29 lines · LABBE Corentin
Quoted 17 lines · Hans Verkuil
Hi Corentin,
I finally had the opportunity to test the staging zoran driver.
I found several issues when running v4l2-compliance -s (I posted a patch for that), but more seriously is the fact that trying to capture MJPG at resolutions 384x288 or less just hangs my PC. It works OK with 768x576.
I discovered this when running 'v4l2-compliance -s -a -f'.
BTW, why isn't the initial format equal to MJPG 768x576?
I would expect that for these boards that should be the default format.Another issue is that the TODO should mention that for video output there should be a second video device node. And that's really something that has to be done before the zoran driver can be moved out of staging.
Quoted 8 lines
It shouldn't be that hard to implement, I think.
Right now it is impossible to run the compliance test for the output, since it doesn't even see it as an output.
Regards,
Hans
I work on having a second device for output, (it is the reason of "staging: media: zoran: move videodev alloc" which will help).
Quoted 7 lines
But I still have the problem of non working output.
Does output is really needed for going out of staging ?
Probably nobody have it working for ages. The only way to had it was to use an old mplayer output which is broken since so many time. Note that this plugin will never work again.The only way to work on output is to use ffmpeg which just recently have suport for writing non-raw video to V4L.
Then just remove it. The code for output remains in the git history so if someone wants to resurrect that, then that's always possible.
The point is that I don't want to have half-baked output support in mainline.
But what exactly is the problem with getting output to work? Doesn't it just decode MJPEG frames? (Sorry if you explained it before, it's so long ago that I looked at this that I forgot the details)
In any case, before the driver can be moved out of staging video output should either be working or removed. Either is fine, but not the halfway state it is in today.
Regards,
Hans
Quoted 38 lines · Hans Verkuil
Quoted 29 lines · LABBE Corentin
Quoted 17 lines · Hans Verkuil
Hi Corentin,
I finally had the opportunity to test the staging zoran driver.
I found several issues when running v4l2-compliance -s (I posted a patch for that), but more seriously is the fact that trying to capture MJPG at resolutions 384x288 or less just hangs my PC. It works OK with 768x576.
I discovered this when running 'v4l2-compliance -s -a -f'.
BTW, why isn't the initial format equal to MJPG 768x576?
I would expect that for these boards that should be the default format.Another issue is that the TODO should mention that for video output there should be a second video device node. And that's really something that has to be done before the zoran driver can be moved out of staging.
Quoted 8 lines
It shouldn't be that hard to implement, I think.
Right now it is impossible to run the compliance test for the output, since it doesn't even see it as an output.
Regards,
Hans
I work on having a second device for output, (it is the reason of "staging: media: zoran: move videodev alloc" which will help).
Quoted 7 lines
But I still have the problem of non working output.
Does output is really needed for going out of staging ?
Probably nobody have it working for ages. The only way to had it was to use an old mplayer output which is broken since so many time. Note that this plugin will never work again.The only way to work on output is to use ffmpeg which just recently have suport for writing non-raw video to V4L.
Quoted 9 lines
Then just remove it. The code for output remains in the git history so if someone wants to resurrect that, then that's always possible.
The point is that I don't want to have half-baked output support in mainline.
But what exactly is the problem with getting output to work? Doesn't it just decode MJPEG frames? (Sorry if you explained it before, it's so long ago that I looked at this that I forgot the details)
The first problem is that zoran dont like comment COM/APP0 markers. This imply a per buffer filtering but this is already handled in my next branch.
But the remaining problem is that any output is like http://kernel.montjoie.ovh/zoran_out.png.
I hacked the driver to grab a working buffer when doing input and overrun output buffer later. And the result is a working static output.
So the hw handling is good and the problem came from the data feeding/handling.
I believe that something is wrong in what ffmpeg negociate/send.
Regards
Quoted 54 lines · LABBE Corentin
Quoted 38 lines · Hans Verkuil
Quoted 29 lines · LABBE Corentin
Quoted 17 lines · Hans Verkuil
Hi Corentin,
I finally had the opportunity to test the staging zoran driver.
I found several issues when running v4l2-compliance -s (I posted a patch for that), but more seriously is the fact that trying to capture MJPG at resolutions 384x288 or less just hangs my PC. It works OK with 768x576.
I discovered this when running 'v4l2-compliance -s -a -f'.
BTW, why isn't the initial format equal to MJPG 768x576?
I would expect that for these boards that should be the default format.Another issue is that the TODO should mention that for video output there should be a second video device node. And that's really something that has to be done before the zoran driver can be moved out of staging.
Quoted 8 lines
It shouldn't be that hard to implement, I think.
Right now it is impossible to run the compliance test for the output, since it doesn't even see it as an output.
Regards,
Hans
I work on having a second device for output, (it is the reason of "staging: media: zoran: move videodev alloc" which will help).
Quoted 7 lines
But I still have the problem of non working output.
Does output is really needed for going out of staging ?
Probably nobody have it working for ages. The only way to had it was to use an old mplayer output which is broken since so many time. Note that this plugin will never work again.The only way to work on output is to use ffmpeg which just recently have suport for writing non-raw video to V4L.
Quoted 9 lines
Then just remove it. The code for output remains in the git history so if someone wants to resurrect that, then that's always possible.
The point is that I don't want to have half-baked output support in mainline.
But what exactly is the problem with getting output to work? Doesn't it just decode MJPEG frames? (Sorry if you explained it before, it's so long ago that I looked at this that I forgot the details)
The first problem is that zoran dont like comment COM/APP0 markers. This imply a per buffer filtering but this is already handled in my next branch.
But the remaining problem is that any output is like http://kernel.montjoie.ovh/zoran_out.png.
Quoted 8 lines
I hacked the driver to grab a working buffer when doing input and overrun output buffer later. And the result is a working static output.
So the hw handling is good and the problem came from the data feeding/handling.I believe that something is wrong in what ffmpeg negociate/send.
Regards
Why not use v4l2-ctl to capture video and then replay it? You should be able to do this:
v4l2-ctl --stream-mmap --stream-to-hdr cap.hdr --stream-count 60
then this:
v4l2-ctl --stream-out-mmap --stream-from-hdr cap.hdr
The -hdr options write the frames prefixed with a header containing the length of the frame. That way you can capture variable-length frames and stream them out with the same payload length.
Regards,
Hans