Skip to contentSkip to conversation

qla2xxx driver bug fixes

PATCH In review Nilesh Javali 3 participants 23 messages Sep 8, 2021

Subsystems (3)
lore
Share & tools
lore

Nilesh Javali

author maintainer
#0 lore raw

cover qla2xxx driver bug fixes

Martin,

Please apply the qla2xxx driver bug fixes to the scsi tree at your earliest convenience.

Thanks,
Nilesh

Arun Easi (2):
qla2xxx: Fix crash in NVME abort path
qla2xxx: Fix kernel crash when accessing port_speed sysfs file

Bikash Hazarika (1):
qla2xxx: Add support for mailbox passthru

Manish Rangankar (1):
qla2xxx: Move heart beat handling from dpc thread to workqueue

Nilesh Javali (1):
qla2xxx: Update version to 10.02.07.100-k

Quinn Tran (2):
qla2xxx: edif: Use link event to wake up app
qla2xxx: Fix use after free in eh_abort path

Saurav Kashyap (2):
qla2xxx: Display 16G only as supported speeds for 3830c card
qla2xxx: Check for firmware capability before creating QPair

Shreyas Deodhar (1):
qla2xxx: Call process_response_queue() in Tx path

 drivers/scsi/qla2xxx/qla_attr.c    | 24 ++++++++-
 drivers/scsi/qla2xxx/qla_bsg.c     | 48 +++++++++++++++++
 drivers/scsi/qla2xxx/qla_bsg.h     |  7 +++
 drivers/scsi/qla2xxx/qla_def.h     |  4 +-
 drivers/scsi/qla2xxx/qla_gbl.h     |  4 ++
 drivers/scsi/qla2xxx/qla_gs.c      |  3 +-
 drivers/scsi/qla2xxx/qla_init.c    | 17 +++---
 drivers/scsi/qla2xxx/qla_mbx.c     | 33 ++++++++++++
 drivers/scsi/qla2xxx/qla_nvme.c    | 20 ++++++-
 drivers/scsi/qla2xxx/qla_os.c      | 86 +++++++++++++++---------------
 drivers/scsi/qla2xxx/qla_version.h |  6 +--
 11 files changed, 191 insertions(+), 61 deletions(-)

base-commit: 9b5ac8ab4e8bf5636d1d425aee68ddf45af12057

Signature · 1 line
2.19.0.rc0
author maintainer
#1 lore raw

PATCH 1/10 qla2xxx: Add support for mailbox passthru

From: Bikash Hazarika <[email protected]>

This interface will allow user space application(s) to send a mailbox command to the FW.

---
 drivers/scsi/qla2xxx/qla_bsg.c | 48 ++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_bsg.h |  7 +++++
 drivers/scsi/qla2xxx/qla_gbl.h |  4 +++
 drivers/scsi/qla2xxx/qla_mbx.c | 33 +++++++++++++++++++++++
 4 files changed, 92 insertions(+)
drivers/scsi/qla2xxx/qla_bsg.c +48 -0
index 4b5d28d89d69..0c33fb0de21a 100644
@@ -2877,6 +2877,9 @@ qla2x00_process_vendor_specific(struct scsi_qla_host *vha, struct bsg_job *bsg_j
 	case QL_VND_MANAGE_HOST_PORT:
 		return qla2x00_manage_host_port(bsg_job);
 
+	case QL_VND_MBX_PASSTHRU:
+		return qla2x00_mailbox_passthru(bsg_job);
+
 	default:
 		return -ENOSYS;
 	}
@@ -3013,3 +3016,48 @@ qla24xx_bsg_timeout(struct bsg_job *bsg_job)
 	sp->free(sp);
 	return 0;
 }
+
+int qla2x00_mailbox_passthru(struct bsg_job *bsg_job)
+{
+	struct fc_bsg_reply *bsg_reply = bsg_job->reply;
+	scsi_qla_host_t *vha = shost_priv(fc_bsg_to_shost(bsg_job));
+	int ret = -EINVAL;
+	int ptsize = sizeof(struct qla_mbx_passthru);
+	struct qla_mbx_passthru *req_data = NULL;
+	uint32_t req_data_len;
+
+	req_data_len = bsg_job->request_payload.payload_len;
+	if (req_data_len != ptsize) {
+		ql_log(ql_log_warn, vha, 0xf0a3, "req_data_len invalid.\n");
+		return -EIO;
+	}
+	req_data = kzalloc(ptsize, GFP_KERNEL);
+	if (!req_data) {
+		ql_log(ql_log_warn, vha, 0xf0a4,
+		       "req_data memory allocation failure.\n");
+		return -ENOMEM;
+	}
+
+	/* Copy the request buffer in req_data */
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+			  bsg_job->request_payload.sg_cnt, req_data, ptsize);
+	ret = qla_mailbox_passthru(vha, req_data->mbx_in, req_data->mbx_out);
+
+	/* Copy the req_data in  request buffer */
+	sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+			    bsg_job->reply_payload.sg_cnt, req_data, ptsize);
+
+	bsg_reply->reply_payload_rcv_len = ptsize;
+	if (ret == QLA_SUCCESS)
+		bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = EXT_STATUS_OK;
+	else
+		bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = EXT_STATUS_ERR;
+
+	bsg_job->reply_len = sizeof(*bsg_job->reply);
+	bsg_reply->result = DID_OK << 16;
+	bsg_job_done(bsg_job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
+
+	kfree(req_data);
+
+	return ret;
+}
drivers/scsi/qla2xxx/qla_bsg.h +7 -0
index dd793cf8bc1e..0f8a4c7e52a2 100644
@@ -36,6 +36,7 @@
 #define QL_VND_GET_HOST_STATS		0x24
 #define QL_VND_GET_TGT_STATS		0x25
 #define QL_VND_MANAGE_HOST_PORT		0x26
+#define QL_VND_MBX_PASSTHRU		0x2B
 
 /* BSG Vendor specific subcode returns */
 #define EXT_STATUS_OK			0
@@ -187,6 +188,12 @@ struct qla_port_param {
 	uint16_t speed;
 } __attribute__ ((packed));
 
+struct qla_mbx_passthru {
+	uint16_t reserved1[2];
+	uint16_t mbx_in[32];
+	uint16_t mbx_out[32];
+	uint32_t reserved2[16];
+} __packed;
 
 /* FRU VPD */
 
drivers/scsi/qla2xxx/qla_gbl.h +4 -0
index 1c3f055d41b8..8aadcdeca6cb 100644
@@ -662,9 +662,13 @@ extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
 
 extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *);
 extern int qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *);
+extern int qla2x00_mailbox_passthru(struct bsg_job *bsg_job);
 int __qla_copy_purex_to_buffer(struct scsi_qla_host *vha, void **pkt,
 	struct rsp_que **rsp, u8 *buf, u32 buf_len);
 
+int qla_mailbox_passthru(scsi_qla_host_t *vha, uint16_t *mbx_in,
+			 uint16_t *mbx_out);
+
 /*
  * Global Function Prototypes in qla_dbg.c source file.
  */
drivers/scsi/qla2xxx/qla_mbx.c +33 -0
index 7811c4952035..9eb41dd39043 100644
@@ -7011,3 +7011,36 @@ void qla_no_op_mb(struct scsi_qla_host *vha)
 			"Failed %s %x\n", __func__, rval);
 	}
 }
+
+int qla_mailbox_passthru(scsi_qla_host_t *vha,
+			 uint16_t *mbx_in, uint16_t *mbx_out)
+{
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	int rval = -EINVAL;
+
+	memset(&mc, 0, sizeof(mc));
+	/* Receiving all 32 register's contents */
+	memcpy(&mcp->mb, (char *)mbx_in, (32 * sizeof(uint16_t)));
+
+	mcp->out_mb = 0xFFFFFFFF;
+	mcp->in_mb = 0xFFFFFFFF;
+
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	mcp->bufp = NULL;
+
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0xf0a2,
+			"Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0xf0a3, "Done %s.\n",
+		       __func__);
+		/* passing all 32 register's contents */
+		memcpy(mbx_out, &mcp->mb, 32 * sizeof(uint16_t));
+	}
+
+	return rval;
+}
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 1/10
#2 lore raw

Re: [PATCH 01/10] qla2xxx: Add support for mailbox passthru

Quoted 168 lines · Nilesh Javali

From: Bikash Hazarika <[email protected]>

This interface will allow user space application(s) to send a mailbox command to the FW.

---

drivers/scsi/qla2xxx/qla_bsg.c | 48 ++++++++++++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_bsg.h |  7 +++++
drivers/scsi/qla2xxx/qla_gbl.h |  4 +++
drivers/scsi/qla2xxx/qla_mbx.c | 33 +++++++++++++++++++++++
4 files changed, 92 insertions(+)
drivers/scsi/qla2xxx/qla_bsg.c +48 -0
index 4b5d28d89d69..0c33fb0de21a 100644
@@ -2877,6 +2877,9 @@ qla2x00_process_vendor_specific(struct scsi_qla_host *vha, struct bsg_job *bsg_j
 	case QL_VND_MANAGE_HOST_PORT:
 		return qla2x00_manage_host_port(bsg_job);
 
+	case QL_VND_MBX_PASSTHRU:
+		return qla2x00_mailbox_passthru(bsg_job);
+
 	default:
 		return -ENOSYS;
 	}
@@ -3013,3 +3016,48 @@ qla24xx_bsg_timeout(struct bsg_job *bsg_job)
 	sp->free(sp);
 	return 0;
 }
+
+int qla2x00_mailbox_passthru(struct bsg_job *bsg_job)
+{
+	struct fc_bsg_reply *bsg_reply = bsg_job->reply;
+	scsi_qla_host_t *vha = shost_priv(fc_bsg_to_shost(bsg_job));
+	int ret = -EINVAL;
+	int ptsize = sizeof(struct qla_mbx_passthru);
+	struct qla_mbx_passthru *req_data = NULL;
+	uint32_t req_data_len;
+
+	req_data_len = bsg_job->request_payload.payload_len;
+	if (req_data_len != ptsize) {
+		ql_log(ql_log_warn, vha, 0xf0a3, "req_data_len invalid.\n");
+		return -EIO;
+	}
+	req_data = kzalloc(ptsize, GFP_KERNEL);
+	if (!req_data) {
+		ql_log(ql_log_warn, vha, 0xf0a4,
+		       "req_data memory allocation failure.\n");
+		return -ENOMEM;
+	}
+
+	/* Copy the request buffer in req_data */
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+			  bsg_job->request_payload.sg_cnt, req_data, ptsize);
+	ret = qla_mailbox_passthru(vha, req_data->mbx_in, req_data->mbx_out);
+
+	/* Copy the req_data in  request buffer */
+	sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+			    bsg_job->reply_payload.sg_cnt, req_data, ptsize);
+
+	bsg_reply->reply_payload_rcv_len = ptsize;
+	if (ret == QLA_SUCCESS)
+		bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = EXT_STATUS_OK;
+	else
+		bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = EXT_STATUS_ERR;
+
+	bsg_job->reply_len = sizeof(*bsg_job->reply);
+	bsg_reply->result = DID_OK << 16;
+	bsg_job_done(bsg_job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
+
+	kfree(req_data);
+
+	return ret;
+}
drivers/scsi/qla2xxx/qla_bsg.h +7 -0
index dd793cf8bc1e..0f8a4c7e52a2 100644
@@ -36,6 +36,7 @@
 #define QL_VND_GET_HOST_STATS		0x24
 #define QL_VND_GET_TGT_STATS		0x25
 #define QL_VND_MANAGE_HOST_PORT		0x26
+#define QL_VND_MBX_PASSTHRU		0x2B
 
 /* BSG Vendor specific subcode returns */
 #define EXT_STATUS_OK			0
@@ -187,6 +188,12 @@ struct qla_port_param {
 	uint16_t speed;
 } __attribute__ ((packed));
 
+struct qla_mbx_passthru {
+	uint16_t reserved1[2];
+	uint16_t mbx_in[32];
+	uint16_t mbx_out[32];
+	uint32_t reserved2[16];
+} __packed;
 
 /* FRU VPD */
 
drivers/scsi/qla2xxx/qla_gbl.h +4 -0
index 1c3f055d41b8..8aadcdeca6cb 100644
@@ -662,9 +662,13 @@ extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
 
 extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *);
 extern int qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *);
+extern int qla2x00_mailbox_passthru(struct bsg_job *bsg_job);
 int __qla_copy_purex_to_buffer(struct scsi_qla_host *vha, void **pkt,
 	struct rsp_que **rsp, u8 *buf, u32 buf_len);
 
+int qla_mailbox_passthru(scsi_qla_host_t *vha, uint16_t *mbx_in,
+			 uint16_t *mbx_out);
+
 /*
 * Global Function Prototypes in qla_dbg.c source file.
 */
drivers/scsi/qla2xxx/qla_mbx.c +33 -0
index 7811c4952035..9eb41dd39043 100644
@@ -7011,3 +7011,36 @@ void qla_no_op_mb(struct scsi_qla_host *vha)
 			"Failed %s %x\n", __func__, rval);
 	}
 }
+
+int qla_mailbox_passthru(scsi_qla_host_t *vha,
+			 uint16_t *mbx_in, uint16_t *mbx_out)
+{
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	int rval = -EINVAL;
+
+	memset(&mc, 0, sizeof(mc));
+	/* Receiving all 32 register's contents */
+	memcpy(&mcp->mb, (char *)mbx_in, (32 * sizeof(uint16_t)));
+
+	mcp->out_mb = 0xFFFFFFFF;
+	mcp->in_mb = 0xFFFFFFFF;
+
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	mcp->bufp = NULL;
+
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0xf0a2,
+			"Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+	} else {
+		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0xf0a3, "Done %s.\n",
+		       __func__);
+		/* passing all 32 register's contents */
+		memcpy(mbx_out, &mcp->mb, 32 * sizeof(uint16_t));
+	}
+
+	return rval;
+}
Signature · 1 line
2.19.0.rc0

Looks Good.

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#3 lore raw

PATCH 2/10 qla2xxx: Display 16G only as supported speeds for 3830c card

In reply to Nilesh Javali

From: Saurav Kashyap <[email protected]>

This card is unique and doesn't support lower speeds, hence update the fdmi field to display 16G only.

---
 drivers/scsi/qla2xxx/qla_gs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_gs.c +2 -1
index ebc8fdb0b43d..28b574e20ef3 100644
@@ -1537,7 +1537,8 @@ qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 	}
 	if (IS_QLA2031(ha)) {
 		if ((ha->pdev->subsystem_vendor == 0x103C) &&
-		    (ha->pdev->subsystem_device == 0x8002)) {
+		    ((ha->pdev->subsystem_device == 0x8002) ||
+		    (ha->pdev->subsystem_device == 0x8086))) {
 			speeds = FDMI_PORT_SPEED_16GB;
 		} else {
 			speeds = FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 2/10
#4 lore raw

Re: [PATCH 02/10] qla2xxx: Display 16G only as supported speeds for 3830c card

Quoted 32 lines · Nilesh Javali

From: Saurav Kashyap <[email protected]>

This card is unique and doesn't support lower speeds, hence update the fdmi field to display 16G only.

---
drivers/scsi/qla2xxx/qla_gs.c | 3 ++-

1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_gs.c +2 -1
index ebc8fdb0b43d..28b574e20ef3 100644
@@ -1537,7 +1537,8 @@ qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha)
 	}
 	if (IS_QLA2031(ha)) {
 		if ((ha->pdev->subsystem_vendor == 0x103C) &&
-		    (ha->pdev->subsystem_device == 0x8002)) {
+		    ((ha->pdev->subsystem_device == 0x8002) ||
+		    (ha->pdev->subsystem_device == 0x8086))) {
 			speeds = FDMI_PORT_SPEED_16GB;
 		} else {
 			speeds = FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB|
Signature · 1 line
2.19.0.rc0

--
Himanshu Madhani Oracle Linux Engineering

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

author maintainer
#5 lore raw

PATCH 3/10 qla2xxx: Check for firmware capability before creating QPair

In reply to Nilesh Javali

From: Saurav Kashyap <[email protected]>

Add firmware capability check of multiQ specific for ISP25XX before creating qpair.

---
 drivers/scsi/qla2xxx/qla_os.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/scsi/qla2xxx/qla_os.c +4 -0
index d2e40aaba734..a1e861ecfc01 100644
@@ -3364,6 +3364,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    host->can_queue, base_vha->req,
 	    base_vha->mgmt_svr_loop_id, host->sg_tablesize);
 
+	/* Check if FW supports MQ or not for ISP25xx */
+	if (IS_QLA25XX(ha) && !(ha->fw_attributes & BIT_6))
+		ha->mqenable = 0;
+
 	if (ha->mqenable) {
 		bool startit = false;
 
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 3/10
#6 lore raw

Re: [PATCH 03/10] qla2xxx: Check for firmware capability before creating QPair

Quoted 33 lines · Nilesh Javali

From: Saurav Kashyap <[email protected]>

Add firmware capability check of multiQ specific for ISP25XX before creating qpair.

---
drivers/scsi/qla2xxx/qla_os.c | 4 ++++

1 file changed, 4 insertions(+)
drivers/scsi/qla2xxx/qla_os.c +4 -0
index d2e40aaba734..a1e861ecfc01 100644
@@ -3364,6 +3364,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    host->can_queue, base_vha->req,
 	    base_vha->mgmt_svr_loop_id, host->sg_tablesize);
 
+	/* Check if FW supports MQ or not for ISP25xx */
+	if (IS_QLA25XX(ha) && !(ha->fw_attributes & BIT_6))
+		ha->mqenable = 0;
+
 	if (ha->mqenable) {
 		bool startit = false;
 
Signature · 1 line
2.19.0.rc0

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#7 lore raw

PATCH 4/10 qla2xxx: Fix crash in NVME abort path

In reply to Nilesh Javali

From: Arun Easi <[email protected]>

System crash was seen when I/O was run against a NVME target and when I/O aborts were occurring.

Crash stack is:

    -- relevant crash stack --
    BUG: kernel NULL pointer dereference, address: 0000000000000010
    :
    #6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e
       [exception RIP: qla_nvme_abort_work+339]
       RIP: ffffffffc0f592e3  RSP: ffffae1f8666be80  RFLAGS: 00010297
       RAX: 0000000000000000  RBX: ffff9b581fc8af80  RCX: ffffffffc0f83bd0
       RDX: 0000000000000001  RSI: ffff9b5839c6c7c8  RDI: 0000000008000000
       RBP: ffff9b6832f85000   R8: ffffffffc0f68160   R9: ffffffffc0f70652
       R10: ffffae1f862ffdc8  R11: 0000000000000300  R12: 000000000000010d
       R13: 0000000000000000  R14: ffff9b5839cea000  R15: 0ffff9b583fab170
       ORIG_RAX: ffffffffffffffff   CS: 0010  SS: 0018
    #7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184
    #8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d
    #9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed

The crash was due to a stale SRB structure access after it was aborted. Fixed the issue by removing stale access.

---
 drivers/scsi/qla2xxx/qla_nvme.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_nvme.c +12 -2
index 1c5da2dbd6f9..877b2b625020 100644
@@ -228,6 +228,8 @@ static void qla_nvme_abort_work(struct work_struct *work)
 	fc_port_t *fcport = sp->fcport;
 	struct qla_hw_data *ha = fcport->vha->hw;
 	int rval, abts_done_called = 1;
+	bool io_wait_for_abort_done;
+	uint32_t handle;
 
 	ql_dbg(ql_dbg_io, fcport->vha, 0xffff,
 	       "%s called for sp=%p, hndl=%x on fcport=%p desc=%p deleted=%d\n",
@@ -244,12 +246,20 @@ static void qla_nvme_abort_work(struct work_struct *work)
 		goto out;
 	}
 
+	/*
+	 * sp may not be valid after abort_command if return code is either
+	 * SUCCESS or ERR_FROM_FW codes, so cache the value here.
+	 */
+	io_wait_for_abort_done = ql2xabts_wait_nvme &&
+					QLA_ABTS_WAIT_ENABLED(sp);
+	handle = sp->handle;
+
 	rval = ha->isp_ops->abort_command(sp);
 
 	ql_dbg(ql_dbg_io, fcport->vha, 0x212b,
 	    "%s: %s command for sp=%p, handle=%x on fcport=%p rval=%x\n",
 	    __func__, (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
-	    sp, sp->handle, fcport, rval);
+	    sp, handle, fcport, rval);
 
 	/*
 	 * If async tmf is enabled, the abort callback is called only on
@@ -264,7 +274,7 @@ static void qla_nvme_abort_work(struct work_struct *work)
 	 * are waited until ABTS complete. This kref is decreased
 	 * at qla24xx_abort_sp_done function.
 	 */
-	if (abts_done_called && ql2xabts_wait_nvme && QLA_ABTS_WAIT_ENABLED(sp))
+	if (abts_done_called && io_wait_for_abort_done)
 		return;
 out:
 	/* kref_get was done before work was schedule. */
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 4/10
#8 lore raw

Re: [PATCH 04/10] qla2xxx: Fix crash in NVME abort path

Quoted 27 lines · Nilesh Javali

From: Arun Easi <[email protected]>

System crash was seen when I/O was run against a NVME target and when I/O aborts were occurring.

Crash stack is:

   -- relevant crash stack --
   BUG: kernel NULL pointer dereference, address: 0000000000000010
   :
   #6 [ffffae1f8666bdd0] page_fault at ffffffffa740122e
      [exception RIP: qla_nvme_abort_work+339]
      RIP: ffffffffc0f592e3  RSP: ffffae1f8666be80  RFLAGS: 00010297
      RAX: 0000000000000000  RBX: ffff9b581fc8af80  RCX: ffffffffc0f83bd0
      RDX: 0000000000000001  RSI: ffff9b5839c6c7c8  RDI: 0000000008000000
      RBP: ffff9b6832f85000   R8: ffffffffc0f68160   R9: ffffffffc0f70652
      R10: ffffae1f862ffdc8  R11: 0000000000000300  R12: 000000000000010d
      R13: 0000000000000000  R14: ffff9b5839cea000  R15: 0ffff9b583fab170
      ORIG_RAX: ffffffffffffffff   CS: 0010  SS: 0018
   #7 [ffffae1f8666be98] process_one_work at ffffffffa6aba184
   #8 [ffffae1f8666bed8] worker_thread at ffffffffa6aba39d
   #9 [ffffae1f8666bf10] kthread at ffffffffa6ac06ed
Quoted 3 lines

The crash was due to a stale SRB structure access after it was aborted. Fixed the issue by removing stale access.

Add following

Fixes 2cabf10dbbe38 (“scsi: qla2xxx: Fix hang on NVMe command timeouts ”)
Quoted 49 lines

---
drivers/scsi/qla2xxx/qla_nvme.c | 14 ++++++++++++--

1 file changed, 12 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_nvme.c +12 -2
index 1c5da2dbd6f9..877b2b625020 100644
@@ -228,6 +228,8 @@ static void qla_nvme_abort_work(struct work_struct *work)
 	fc_port_t *fcport = sp->fcport;
 	struct qla_hw_data *ha = fcport->vha->hw;
 	int rval, abts_done_called = 1;
+	bool io_wait_for_abort_done;
+	uint32_t handle;
 
 	ql_dbg(ql_dbg_io, fcport->vha, 0xffff,
 	       "%s called for sp=%p, hndl=%x on fcport=%p desc=%p deleted=%d\n",
@@ -244,12 +246,20 @@ static void qla_nvme_abort_work(struct work_struct *work)
 		goto out;
 	}
 
+	/*
+	 * sp may not be valid after abort_command if return code is either
+	 * SUCCESS or ERR_FROM_FW codes, so cache the value here.
+	 */
+	io_wait_for_abort_done = ql2xabts_wait_nvme &&
+					QLA_ABTS_WAIT_ENABLED(sp);
+	handle = sp->handle;
+
 	rval = ha->isp_ops->abort_command(sp);
 
 	ql_dbg(ql_dbg_io, fcport->vha, 0x212b,
 	    "%s: %s command for sp=%p, handle=%x on fcport=%p rval=%x\n",
 	    __func__, (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
-	    sp, sp->handle, fcport, rval);
+	    sp, handle, fcport, rval);
 
 	/*
 	 * If async tmf is enabled, the abort callback is called only on
@@ -264,7 +274,7 @@ static void qla_nvme_abort_work(struct work_struct *work)
 	 * are waited until ABTS complete. This kref is decreased
 	 * at qla24xx_abort_sp_done function.
 	 */
-	if (abts_done_called && ql2xabts_wait_nvme && QLA_ABTS_WAIT_ENABLED(sp))
+	if (abts_done_called && io_wait_for_abort_done)
 		return;

out:

Quoted 4 lines
	/* kref_get was done before work was schedule. */
Signature · 1 line
2.19.0.rc0

Otherwise

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#9 lore raw

PATCH 5/10 qla2xxx: edif: Use link event to wake up app

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

Authentication application may be running and in the past tried to probe driver (app_start) but unsuccessful. This could be due to the bsg layer not ready to service the request. On successful link up, driver will use the netlink Link Up event to notify app to retry the app_start call.

In another case, app does not poll for new npiv host. This link up event would notify app of the presence of a new SCSI Host.

---
 drivers/scsi/qla2xxx/qla_init.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +7 -8
index 1e4e3e83b5c7..c6b3d0e7489e 100644
@@ -5335,15 +5335,14 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 			    "LOOP READY.\n");
 			ha->flags.fw_init_done = 1;
 
+			/*
+			 * use link up to wake up app to get ready for
+			 * authentication.
+			 */
 			if (ha->flags.edif_enabled &&
-			    !(vha->e_dbell.db_flags & EDB_ACTIVE) &&
-			    N2N_TOPO(vha->hw)) {
-				/*
-				 * use port online to wake up app to get ready
-				 * for authentication
-				 */
-				qla2x00_post_aen_work(vha, FCH_EVT_PORT_ONLINE, 0);
-			}
+			    !(vha->e_dbell.db_flags & EDB_ACTIVE))
+				qla2x00_post_aen_work(vha, FCH_EVT_LINKUP,
+						      ha->link_data_rate);
 
 			/*
 			 * Process any ATIO queue entries that came in
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 5/10
#10 lore raw

Re: [PATCH 05/10] qla2xxx: edif: Use link event to wake up app

Quoted 15 lines · Nilesh Javali

From: Quinn Tran <[email protected]>

Authentication application may be running and in the past tried to probe driver (app_start) but unsuccessful. This could be due to the bsg layer not ready to service the request. On successful link up, driver will use the netlink Link Up event to notify app to retry the app_start call.

In another case, app does not poll for new npiv host. This link up event would notify app of the presence of a new SCSI Host.

Missing

Fixes 4de067e5df12c ("scsi: qla2xxx: edif: Add N2N support for EDIF”)
Quoted 36 lines

---
drivers/scsi/qla2xxx/qla_init.c | 15 +++++++--------

1 file changed, 7 insertions(+), 8 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +7 -8
index 1e4e3e83b5c7..c6b3d0e7489e 100644
@@ -5335,15 +5335,14 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 			    "LOOP READY.\n");
 			ha->flags.fw_init_done = 1;
 
+			/*
+			 * use link up to wake up app to get ready for
+			 * authentication.
+			 */
 			if (ha->flags.edif_enabled &&
-			    !(vha->e_dbell.db_flags & EDB_ACTIVE) &&
-			    N2N_TOPO(vha->hw)) {
-				/*
-				 * use port online to wake up app to get ready
-				 * for authentication
-				 */
-				qla2x00_post_aen_work(vha, FCH_EVT_PORT_ONLINE, 0);
-			}
+			    !(vha->e_dbell.db_flags & EDB_ACTIVE))
+				qla2x00_post_aen_work(vha, FCH_EVT_LINKUP,
+						      ha->link_data_rate);
 
 			/*
 			 * Process any ATIO queue entries that came in
Signature · 1 line
2.19.0.rc0

Otherwise

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#11 lore raw

PATCH 6/10 qla2xxx: Fix kernel crash when accessing port_speed sysfs file

In reply to Nilesh Javali

From: Arun Easi <[email protected]>

Kernel crashes when accessing port_speed sysfs file. The issue happens on a CNA when the local array was accessed beyond bounds. Fix this by changing the lookup.

BUG: unable to handle kernel paging request at 0000000000004000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 15 PID: 455213 Comm: sosreport Kdump: loaded Not tainted
4.18.0-305.7.1.el8_4.x86_64 #1
RIP: 0010:string_nocheck+0x12/0x70
Code: 00 00 4c 89 e2 be 20 00 00 00 48 89 ef e8 86 9a 00 00 4c 01
e3 eb 81 90 49 89 f2 48 89 ce 48 89 f8 48 c1 fe 30 66 85 f6 74 4f <44> 0f b6 0a
45 84 c9 74 46 83 ee 01 41 b8 01 00 00 00 48 8d 7c 37
RSP: 0018:ffffb5141c1afcf0 EFLAGS: 00010286
RAX: ffff8bf4009f8000 RBX: ffff8bf4009f9000 RCX: ffff0a00ffffff04
RDX: 0000000000004000 RSI: ffffffffffffffff RDI: ffff8bf4009f8000
RBP: 0000000000004000 R08: 0000000000000001 R09: ffffb5141c1afb84
R10: ffff8bf4009f9000 R11: ffffb5141c1afce6 R12: ffff0a00ffffff04
R13: ffffffffc08e21aa R14: 0000000000001000 R15: ffffffffc08e21aa
FS:  00007fc4ebfff700(0000) GS:ffff8c717f7c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000004000 CR3: 000000edfdee6006 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  string+0x40/0x50
  vsnprintf+0x33c/0x520
  scnprintf+0x4d/0x90
  qla2x00_port_speed_show+0xb5/0x100 [qla2xxx]
  dev_attr_show+0x1c/0x40
  sysfs_kf_seq_show+0x9b/0x100
  seq_read+0x153/0x410
  vfs_read+0x91/0x140
  ksys_read+0x4f/0xb0
  do_syscall_64+0x5b/0x1a0
  entry_SYSCALL_64_after_hwframe+0x65/0xca
---
 drivers/scsi/qla2xxx/qla_attr.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +22 -2
index d09776b77af2..cb5f2ecb652d 100644
@@ -1868,6 +1868,18 @@ qla2x00_port_speed_store(struct device *dev, struct device_attribute *attr,
 	return strlen(buf);
 }
 
+static const struct {
+	u16 rate;
+	char *str;
+} port_speed_str[] = {
+	{ PORT_SPEED_4GB, "4" },
+	{ PORT_SPEED_8GB, "8" },
+	{ PORT_SPEED_16GB, "16" },
+	{ PORT_SPEED_32GB, "32" },
+	{ PORT_SPEED_64GB, "64" },
+	{ PORT_SPEED_10GB, "10" },
+};
+
 static ssize_t
 qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
     char *buf)
@@ -1875,7 +1887,8 @@ qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
 	struct scsi_qla_host *vha = shost_priv(dev_to_shost(dev));
 	struct qla_hw_data *ha = vha->hw;
 	ssize_t rval;
-	char *spd[7] = {"0", "0", "0", "4", "8", "16", "32"};
+	u16 i;
+	char *speed = "Unknown";
 
 	rval = qla2x00_get_data_rate(vha);
 	if (rval != QLA_SUCCESS) {
@@ -1884,7 +1897,14 @@ qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", spd[ha->link_data_rate]);
+	for (i = 0; i < ARRAY_SIZE(port_speed_str); i++) {
+		if (port_speed_str[i].rate != ha->link_data_rate)
+			continue;
+		speed = port_speed_str[i].str;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", speed);
 }
 
 static ssize_t
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 6/10
#12 lore raw

Re: [PATCH 06/10] qla2xxx: Fix kernel crash when accessing port_speed sysfs file

Quoted 34 lines · Nilesh Javali

From: Arun Easi <[email protected]>

Kernel crashes when accessing port_speed sysfs file. The issue happens on a CNA when the local array was accessed beyond bounds. Fix this by changing the lookup.

BUG: unable to handle kernel paging request at 0000000000004000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 15 PID: 455213 Comm: sosreport Kdump: loaded Not tainted
4.18.0-305.7.1.el8_4.x86_64 #1
RIP: 0010:string_nocheck+0x12/0x70
Code: 00 00 4c 89 e2 be 20 00 00 00 48 89 ef e8 86 9a 00 00 4c 01
e3 eb 81 90 49 89 f2 48 89 ce 48 89 f8 48 c1 fe 30 66 85 f6 74 4f <44> 0f b6 0a
45 84 c9 74 46 83 ee 01 41 b8 01 00 00 00 48 8d 7c 37
RSP: 0018:ffffb5141c1afcf0 EFLAGS: 00010286
RAX: ffff8bf4009f8000 RBX: ffff8bf4009f9000 RCX: ffff0a00ffffff04
RDX: 0000000000004000 RSI: ffffffffffffffff RDI: ffff8bf4009f8000
RBP: 0000000000004000 R08: 0000000000000001 R09: ffffb5141c1afb84
R10: ffff8bf4009f9000 R11: ffffb5141c1afce6 R12: ffff0a00ffffff04
R13: ffffffffc08e21aa R14: 0000000000001000 R15: ffffffffc08e21aa
FS:  00007fc4ebfff700(0000) GS:ffff8c717f7c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000004000 CR3: 000000edfdee6006 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 string+0x40/0x50
 vsnprintf+0x33c/0x520
 scnprintf+0x4d/0x90
Quoted 9 lines
 qla2x00_port_speed_show+0xb5/0x100 [qla2xxx]
 dev_attr_show+0x1c/0x40
 sysfs_kf_seq_show+0x9b/0x100
 seq_read+0x153/0x410
 vfs_read+0x91/0x140
 ksys_read+0x4f/0xb0
 do_syscall_64+0x5b/0x1a0
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Missing yet another

Fixes 4910b524ac9e6 ("scsi: qla2xxx: Add support for setting port speed”)
Quoted 54 lines

---
drivers/scsi/qla2xxx/qla_attr.c | 24 ++++++++++++++++++++++--

1 file changed, 22 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +12 -0
index d09776b77af2..cb5f2ecb652d 100644
@@ -1868,6 +1868,18 @@ qla2x00_port_speed_store(struct device *dev, struct device_attribute *attr,
 	return strlen(buf);
 }
 
+static const struct {
+	u16 rate;
+	char *str;
+} port_speed_str[] = {
+	{ PORT_SPEED_4GB, "4" },
+	{ PORT_SPEED_8GB, "8" },
+	{ PORT_SPEED_16GB, "16" },
+	{ PORT_SPEED_32GB, "32" },
+	{ PORT_SPEED_64GB, "64" },
+	{ PORT_SPEED_10GB, "10" },
+};
+

static ssize_t
qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
char *buf)

drivers/scsi/qla2xxx/qla_attr.c +10 -2
@@ -1875,7 +1887,8 @@ qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
 	struct scsi_qla_host *vha = shost_priv(dev_to_shost(dev));
 	struct qla_hw_data *ha = vha->hw;
 	ssize_t rval;
-	char *spd[7] = {"0", "0", "0", "4", "8", "16", "32"};
+	u16 i;
+	char *speed = "Unknown";
 
 	rval = qla2x00_get_data_rate(vha);
 	if (rval != QLA_SUCCESS) {
@@ -1884,7 +1897,14 @@ qla2x00_port_speed_show(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", spd[ha->link_data_rate]);
+	for (i = 0; i < ARRAY_SIZE(port_speed_str); i++) {
+		if (port_speed_str[i].rate != ha->link_data_rate)
+			continue;
+		speed = port_speed_str[i].str;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", speed);
 }
 
Quoted 4 lines

static ssize_t

Signature · 1 line
2.19.0.rc0

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#13 lore raw

PATCH 7/10 qla2xxx: Call process_response_queue() in Tx path

In reply to Nilesh Javali

From: Shreyas Deodhar <[email protected]>

Process responses in Tx path if any available for better performance.

---
 drivers/scsi/qla2xxx/qla_nvme.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/scsi/qla2xxx/qla_nvme.c +6 -0
index 877b2b625020..0ae1e081cb03 100644
@@ -399,6 +399,7 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 	uint16_t	avail_dsds;
 	struct dsd64	*cur_dsd;
 	struct req_que *req = NULL;
+	struct rsp_que *rsp = NULL;
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
 	struct qla_qpair *qpair = sp->qpair;
@@ -410,6 +411,7 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 
 	/* Setup qpair pointers */
 	req = qpair->req;
+	rsp = qpair->rsp;
 	tot_dsds = fd->sg_cnt;
 
 	/* Acquire qpair specific lock */
@@ -571,6 +573,10 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 	/* Set chip new ring index. */
 	wrt_reg_dword(req->req_q_in, req->ring_index);
 
+	if (vha->flags.process_response_queue &&
+	    rsp->ring_ptr->signature != RESPONSE_PROCESSED)
+		qla24xx_process_response_queue(vha, rsp);
+
 queuing_error:
 	spin_unlock_irqrestore(&qpair->qp_lock, flags);
 
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 7/10
#14 lore raw

Re: [PATCH 07/10] qla2xxx: Call process_response_queue() in Tx path

Quoted 8 lines · Nilesh Javali

From: Shreyas Deodhar <[email protected]>

Process responses in Tx path if any available for better performance.

I’ll let you decide if you want to add this to all stable or not, but if you decide this needs to go into stable then add

Fixes e84067d743010 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration”)
Quoted 35 lines

---
drivers/scsi/qla2xxx/qla_nvme.c | 6 ++++++

1 file changed, 6 insertions(+)
drivers/scsi/qla2xxx/qla_nvme.c +6 -0
index 877b2b625020..0ae1e081cb03 100644
@@ -399,6 +399,7 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 	uint16_t	avail_dsds;
 	struct dsd64	*cur_dsd;
 	struct req_que *req = NULL;
+	struct rsp_que *rsp = NULL;
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
 	struct qla_qpair *qpair = sp->qpair;
@@ -410,6 +411,7 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 
 	/* Setup qpair pointers */
 	req = qpair->req;
+	rsp = qpair->rsp;
 	tot_dsds = fd->sg_cnt;
 
 	/* Acquire qpair specific lock */
@@ -571,6 +573,10 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
 	/* Set chip new ring index. */
 	wrt_reg_dword(req->req_q_in, req->ring_index);
 
+	if (vha->flags.process_response_queue &&
+	    rsp->ring_ptr->signature != RESPONSE_PROCESSED)
+		qla24xx_process_response_queue(vha, rsp);
+

queuing_error:

Quoted 5 lines
	spin_unlock_irqrestore(&qpair->qp_lock, flags);
Signature · 1 line
2.19.0.rc0

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#15 lore raw

PATCH 8/10 qla2xxx: Move heart beat handling from dpc thread to workqueue

In reply to Nilesh Javali

From: Manish Rangankar <[email protected]>

DPC thread gets restricted due to a no-op mailbox, which is a blocking call and has a high execution frequency. To free up the DPC thread we move no-op handling to the workqueue. Also, modified qla_do_hb to send no-op MBC if we don’t have any active interrupts, but there are still IOs outstanding with firmware.

Fixes d94d8158e184 ("scsi: qla2xxx: Add heartbeat check")
---
 drivers/scsi/qla2xxx/qla_def.h  |  4 +-
 drivers/scsi/qla2xxx/qla_init.c |  2 +
 drivers/scsi/qla2xxx/qla_os.c   | 74 +++++++++++++++------------------
 3 files changed, 38 insertions(+), 42 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +2 -2
index be2eb75ee1a3..d6e131bf1824 100644
@@ -3750,6 +3750,7 @@ struct qla_qpair {
 	struct qla_fw_resources fwres ____cacheline_aligned;
 	u32	cmd_cnt;
 	u32	cmd_completion_cnt;
+	u32	prev_completion_cnt;
 };
 
 /* Place holder for FW buffer parameters */
@@ -4607,6 +4608,7 @@ struct qla_hw_data {
 	struct qla_chip_state_84xx *cs84xx;
 	struct isp_operations *isp_ops;
 	struct workqueue_struct *wq;
+	struct work_struct hb_work;
 	struct qlfc_fw fw_buf;
 
 	/* FCP_CMND priority support */
@@ -4708,7 +4710,6 @@ struct qla_hw_data {
 
 	struct qla_hw_data_stat stat;
 	pci_error_state_t pci_error_state;
-	u64 prev_cmd_cnt;
 	struct dma_pool *purex_dma_pool;
 	struct btree_head32 host_map;
 
@@ -4854,7 +4855,6 @@ typedef struct scsi_qla_host {
 #define SET_ZIO_THRESHOLD_NEEDED 32
 #define ISP_ABORT_TO_ROM	33
 #define VPORT_DELETE		34
-#define HEARTBEAT_CHK		38
 
 #define PROCESS_PUREX_IOCB	63
 
drivers/scsi/qla2xxx/qla_init.c +2 -0
index c6b3d0e7489e..a9a4243cb15a 100644
@@ -7025,12 +7025,14 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	ha->chip_reset++;
 	ha->base_qpair->chip_reset = ha->chip_reset;
 	ha->base_qpair->cmd_cnt = ha->base_qpair->cmd_completion_cnt = 0;
+	ha->base_qpair->prev_completion_cnt = 0;
 	for (i = 0; i < ha->max_qpairs; i++) {
 		if (ha->queue_pair_map[i]) {
 			ha->queue_pair_map[i]->chip_reset =
 				ha->base_qpair->chip_reset;
 			ha->queue_pair_map[i]->cmd_cnt =
 			    ha->queue_pair_map[i]->cmd_completion_cnt = 0;
+			ha->base_qpair->prev_completion_cnt = 0;
 		}
 	}
 
drivers/scsi/qla2xxx/qla_os.c +34 -40

120 lines not on this page · raw message

Signature · 1 line
2.19.0.rc0
#16 lore raw

Re: [PATCH 08/10] qla2xxx: Move heart beat handling from dpc thread to workqueue

Quoted 13 lines · Nilesh Javali

From: Manish Rangankar <[email protected]>

DPC thread gets restricted due to a no-op mailbox, which is a blocking call and has a high execution frequency. To free up the DPC thread we move no-op handling to the workqueue. Also, modified qla_do_hb to send no-op MBC if we don’t have any active interrupts, but there are still IOs outstanding with firmware.

Fixes d94d8158e184 ("scsi: qla2xxx: Add heartbeat check")
Quoted 21 lines

---

drivers/scsi/qla2xxx/qla_def.h  |  4 +-
drivers/scsi/qla2xxx/qla_init.c |  2 +
drivers/scsi/qla2xxx/qla_os.c   | 74 +++++++++++++++------------------
3 files changed, 38 insertions(+), 42 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +1 -0
index be2eb75ee1a3..d6e131bf1824 100644
@@ -3750,6 +3750,7 @@ struct qla_qpair {
 	struct qla_fw_resources fwres ____cacheline_aligned;
 	u32	cmd_cnt;
 	u32	cmd_completion_cnt;
+	u32	prev_completion_cnt;
 };
 
 /* Place holder for FW buffer parameters */

drivers/scsi/qla2xxx/qla_def.h struct qla_hw_data { · line 4611

Quoted 4 lines
drivers/scsi/qla2xxx/qla_def.h +1 -0
@@ -4607,6 +4608,7 @@ struct qla_hw_data {
 	struct qla_chip_state_84xx *cs84xx;
 	struct isp_operations *isp_ops;
 	struct workqueue_struct *wq;
+	struct work_struct hb_work;

Use heartbeat_work (which is not awfully long and reads better.

Quoted 43 lines
drivers/scsi/qla2xxx/qla_def.h +0 -2
 	struct qlfc_fw fw_buf;
 
 	/* FCP_CMND priority support */
@@ -4708,7 +4710,6 @@ struct qla_hw_data {
 
 	struct qla_hw_data_stat stat;
 	pci_error_state_t pci_error_state;
-	u64 prev_cmd_cnt;
 	struct dma_pool *purex_dma_pool;
 	struct btree_head32 host_map;
 
@@ -4854,7 +4855,6 @@ typedef struct scsi_qla_host {
 #define SET_ZIO_THRESHOLD_NEEDED 32
 #define ISP_ABORT_TO_ROM	33
 #define VPORT_DELETE		34
-#define HEARTBEAT_CHK		38
 
 #define PROCESS_PUREX_IOCB	63
 
drivers/scsi/qla2xxx/qla_init.c +2 -0
index c6b3d0e7489e..a9a4243cb15a 100644
@@ -7025,12 +7025,14 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	ha->chip_reset++;
 	ha->base_qpair->chip_reset = ha->chip_reset;
 	ha->base_qpair->cmd_cnt = ha->base_qpair->cmd_completion_cnt = 0;
+	ha->base_qpair->prev_completion_cnt = 0;
 	for (i = 0; i < ha->max_qpairs; i++) {
 		if (ha->queue_pair_map[i]) {
 			ha->queue_pair_map[i]->chip_reset =
 				ha->base_qpair->chip_reset;
 			ha->queue_pair_map[i]->cmd_cnt =
 			    ha->queue_pair_map[i]->cmd_completion_cnt = 0;
+			ha->base_qpair->prev_completion_cnt = 0;
 		}
 	}
 
drivers/scsi/qla2xxx/qla_os.c +0 -0
index a1e861ecfc01..0454f79a8047 100644

drivers/scsi/qla2xxx/qla_os.c qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time) · line 2797

Quoted 4 lines
drivers/scsi/qla2xxx/qla_os.c +1 -0
@@ -2794,6 +2794,16 @@ qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
 	return atomic_read(&vha->loop_state) == LOOP_READY;
 }
 
+static void qla_hb_work_fn(struct work_struct *work)
              ^^^^^^^^^^^^^^

Use qla_heartbeat_work_fn for better readability

Quoted 40 lines
drivers/scsi/qla2xxx/qla_os.c +10 -11
+{
+	struct qla_hw_data *ha = container_of(work,
+		struct qla_hw_data, hb_work);
+	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
+
+	if (!ha->flags.mbox_busy && base_vha->flags.init_done)
+		qla_no_op_mb(base_vha);
+}
+
 static void qla2x00_iocb_work_fn(struct work_struct *work)
 {
 	struct scsi_qla_host *vha = container_of(work,
@@ -3232,6 +3242,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    host->transportt, sht->vendor_id);
 
 	INIT_WORK(&base_vha->iocb_work, qla2x00_iocb_work_fn);
+	INIT_WORK(&ha->hb_work, qla_hb_work_fn);
 
 	/* Set up the irqs */
 	ret = qla2x00_request_irqs(ha, rsp);
@@ -7118,17 +7129,6 @@ qla2x00_do_dpc(void *data)
 			qla2x00_lip_reset(base_vha);
 		}
 
-		if (test_bit(HEARTBEAT_CHK, &base_vha->dpc_flags)) {
-			/*
-			 * if there is a mb in progress then that's
-			 * enough of a check to see if fw is still ticking.
-			 */
-			if (!ha->flags.mbox_busy && base_vha->flags.init_done)
-				qla_no_op_mb(base_vha);
-
-			clear_bit(HEARTBEAT_CHK, &base_vha->dpc_flags);
-		}
-
 		ha->dpc_active = 0;

end_loop:

		set_current_state(TASK_INTERRUPTIBLE);
drivers/scsi/qla2xxx/qla_os.c +0 -0
@@ -7187,57 +7187,51 @@ qla2x00_rst_aen(scsi_qla_host_t *vha)
 

drivers/scsi/qla2xxx/qla_os.c qla2x00_rst_aen(scsi_qla_host_t *vha) · line 7194

Quoted 10 lines
drivers/scsi/qla2xxx/qla_os.c +3 -3
 static bool qla_do_heartbeat(struct scsi_qla_host *vha)
 {
-	u64 cmd_cnt, prev_cmd_cnt;
-	bool do_hb = false;
 	struct qla_hw_data *ha = vha->hw;
-	int i;
+	u32 cmpl_cnt;
+	u16 i;
+	bool do_hb = false;
 

use do_heartbeat which is self-explanatory and reads better

Quoted 68 lines
drivers/scsi/qla2xxx/qla_os.c +16 -7
-	/* if cmds are still pending down in fw, then do hb */
-	if (ha->base_qpair->cmd_cnt != ha->base_qpair->cmd_completion_cnt) {
+	/*
+	 * Allow do_hb only if we don’t have any active interrupts,
+	 * but there are still IOs outstanding with firmware.
+	 */
+	cmpl_cnt = ha->base_qpair->cmd_completion_cnt;
+	if (cmpl_cnt == ha->base_qpair->prev_completion_cnt &&
+	    cmpl_cnt != ha->base_qpair->cmd_cnt) {
 		do_hb = true;
 		goto skip;
 	}
+	ha->base_qpair->prev_completion_cnt = cmpl_cnt;
 
 	for (i = 0; i < ha->max_qpairs; i++) {
-		if (ha->queue_pair_map[i] &&
-		    ha->queue_pair_map[i]->cmd_cnt !=
-		    ha->queue_pair_map[i]->cmd_completion_cnt) {
-			do_hb = true;
-			break;
+		if (ha->queue_pair_map[i]) {
+			cmpl_cnt = ha->queue_pair_map[i]->cmd_completion_cnt;
+			if (cmpl_cnt == ha->queue_pair_map[i]->prev_completion_cnt &&
+			    cmpl_cnt != ha->queue_pair_map[i]->cmd_cnt) {
+				do_hb = true;
+				break;
+			}
+			ha->queue_pair_map[i]->prev_completion_cnt = cmpl_cnt;
 		}
 	}
 

skip:

drivers/scsi/qla2xxx/qla_os.c +0 -15
-	prev_cmd_cnt = ha->prev_cmd_cnt;
-	cmd_cnt = ha->base_qpair->cmd_cnt;
-	for (i = 0; i < ha->max_qpairs; i++) {
-		if (ha->queue_pair_map[i])
-			cmd_cnt += ha->queue_pair_map[i]->cmd_cnt;
-	}
-	ha->prev_cmd_cnt = cmd_cnt;
-
-	if (!do_hb && ((cmd_cnt - prev_cmd_cnt) > 50))
-		/*
-		 * IOs are completing before periodic hb check.
-		 * IOs seems to be running, do hb for sanity check.
-		 */
-		do_hb = true;
-
	return do_hb;
}

static void qla_heart_beat(struct scsi_qla_host *vha) {

drivers/scsi/qla2xxx/qla_os.c +2 -0
+	struct qla_hw_data *ha = vha->hw;
+
	if (vha->vp_idx)
		return;

	if (vha->hw->flags.eeh_busy || qla2x00_chip_is_down(vha))
		return;
drivers/scsi/qla2xxx/qla_os.c +2 -4
-	if (qla_do_heartbeat(vha)) {
-		set_bit(HEARTBEAT_CHK, &vha->dpc_flags);
-		qla2xxx_wake_dpc(vha);
-	}
+	if (qla_do_heartbeat(vha))
+		queue_work(ha->wq, &ha->hb_work);

}

Quoted 4 lines

/**************************************************************************

Signature · 1 line
2.19.0.rc0

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#17 lore raw

PATCH 9/10 qla2xxx: Fix use after free in eh_abort path

In reply to Nilesh Javali

From: Quinn Tran <[email protected]>

In eh_abort path, driver prematurely exit the call to upper layer. This patch would check for command is aborted / completed by FW before exiting the call.

9 [ffff8b1ebf803c00] page_fault at ffffffffb0389778
[exception RIP: qla2x00_status_entry+0x48d]

  RIP: ffffffffc04fa62d  RSP: ffff8b1ebf803cb0  RFLAGS: 00010082
  RAX: 00000000ffffffff  RBX: 00000000000e0000  RCX: 0000000000000000
  RDX: 0000000000000000  RSI: 00000000000013d8  RDI: fffff3253db78440
  RBP: ffff8b1ebf803dd0   R8: ffff8b1ebcd9b0c0   R9: 0000000000000000
  R10: ffff8b1e38a30808  R11: 0000000000001000  R12: 00000000000003e9
  R13: 0000000000000000  R14: ffff8b1ebcd9d740  R15: 0000000000000028
  ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

10 [ffff8b1ebf803cb0] enqueue_entity at ffffffffafce708f
11 [ffff8b1ebf803d00] enqueue_task_fair at ffffffffafce7b88 12 [ffff8b1ebf803dd8] qla24xx_process_response_queue at ffffffffc04fc9a6 [qla2xxx]
13 [ffff8b1ebf803e78] qla24xx_msix_rsp_q at ffffffffc04ff01b [qla2xxx] 14 [ffff8b1ebf803eb0] __handle_irq_event_percpu at ffffffffafd50714

Fixes f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
---
 drivers/scsi/qla2xxx/qla_os.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +5 -3
index 0454f79a8047..0f3048723965 100644
@@ -1258,6 +1258,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	uint32_t ratov_j;
 	struct qla_qpair *qpair;
 	unsigned long flags;
+	int fast_fail_status = SUCCESS;
 
 	if (qla2x00_isp_reg_stat(ha)) {
 		ql_log(ql_log_info, vha, 0x8042,
@@ -1266,9 +1267,10 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
+	/* Save any FAST_IO_FAIL value to return later if abort succeeds */
 	ret = fc_block_scsi_eh(cmd);
 	if (ret != 0)
-		return ret;
+		fast_fail_status = ret;
 
 	sp = scsi_cmd_priv(cmd);
 	qpair = sp->qpair;
@@ -1276,7 +1278,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	vha->cmd_timeout_cnt++;
 
 	if ((sp->fcport && sp->fcport->deleted) || !qpair)
-		return SUCCESS;
+		return fast_fail_status != SUCCESS ? fast_fail_status : FAILED;
 
 	spin_lock_irqsave(qpair->qp_lock_ptr, flags);
 	sp->comp = &comp;
@@ -1311,7 +1313,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 			    __func__, ha->r_a_tov/10);
 			ret = FAILED;
 		} else {
-			ret = SUCCESS;
+			ret = fast_fail_status;
 		}
 		break;
 	default:
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 9/10
#18 lore raw

Re: [PATCH 09/10] qla2xxx: Fix use after free in eh_abort path

Quoted 19 lines · Nilesh Javali

From: Quinn Tran <[email protected]>

In eh_abort path, driver prematurely exit the call to upper layer. This patch would check for command is aborted / completed by FW before exiting the call.

9 [ffff8b1ebf803c00] page_fault at ffffffffb0389778
[exception RIP: qla2x00_status_entry+0x48d]

 RIP: ffffffffc04fa62d  RSP: ffff8b1ebf803cb0  RFLAGS: 00010082
 RAX: 00000000ffffffff  RBX: 00000000000e0000  RCX: 0000000000000000
 RDX: 0000000000000000  RSI: 00000000000013d8  RDI: fffff3253db78440
 RBP: ffff8b1ebf803dd0   R8: ffff8b1ebcd9b0c0   R9: 0000000000000000
 R10: ffff8b1e38a30808  R11: 0000000000001000  R12: 00000000000003e9
 R13: 0000000000000000  R14: ffff8b1ebcd9d740  R15: 0000000000000028
 ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
Quoted 8 lines

10 [ffff8b1ebf803cb0] enqueue_entity at ffffffffafce708f
11 [ffff8b1ebf803d00] enqueue_task_fair at ffffffffafce7b88 12 [ffff8b1ebf803dd8] qla24xx_process_response_queue at ffffffffc04fc9a6 [qla2xxx]
13 [ffff8b1ebf803e78] qla24xx_msix_rsp_q at ffffffffc04ff01b [qla2xxx] 14 [ffff8b1ebf803eb0] __handle_irq_event_percpu at ffffffffafd50714

Fixes f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Quoted 53 lines

---
drivers/scsi/qla2xxx/qla_os.c | 8 +++++---

1 file changed, 5 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +5 -3
index 0454f79a8047..0f3048723965 100644
@@ -1258,6 +1258,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	uint32_t ratov_j;
 	struct qla_qpair *qpair;
 	unsigned long flags;
+	int fast_fail_status = SUCCESS;
 
 	if (qla2x00_isp_reg_stat(ha)) {
 		ql_log(ql_log_info, vha, 0x8042,
@@ -1266,9 +1267,10 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
+	/* Save any FAST_IO_FAIL value to return later if abort succeeds */
 	ret = fc_block_scsi_eh(cmd);
 	if (ret != 0)
-		return ret;
+		fast_fail_status = ret;
 
 	sp = scsi_cmd_priv(cmd);
 	qpair = sp->qpair;
@@ -1276,7 +1278,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	vha->cmd_timeout_cnt++;
 
 	if ((sp->fcport && sp->fcport->deleted) || !qpair)
-		return SUCCESS;
+		return fast_fail_status != SUCCESS ? fast_fail_status : FAILED;
 
 	spin_lock_irqsave(qpair->qp_lock_ptr, flags);
 	sp->comp = &comp;
@@ -1311,7 +1313,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 			    __func__, ha->r_a_tov/10);
 			ret = FAILED;
 		} else {
-			ret = SUCCESS;
+			ret = fast_fail_status;
 		}
 		break;
 	default:
Signature · 1 line
2.19.0.rc0

Looks good.

--
Himanshu Madhani Oracle Linux Engineering

author maintainer
#19 lore raw

PATCH 10/10 qla2xxx: Update version to 10.02.07.100-k

In reply to Nilesh Javali
---
 drivers/scsi/qla2xxx/qla_version.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_version.h +3 -3
index 055040cbef9b..4b117165bf8b 100644
@@ -6,9 +6,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "10.02.06.200-k"
+#define QLA2XXX_VERSION      "10.02.07.100-k"
 
 #define QLA_DRIVER_MAJOR_VER	10
 #define QLA_DRIVER_MINOR_VER	2
-#define QLA_DRIVER_PATCH_VER	6
-#define QLA_DRIVER_BETA_VER	200
+#define QLA_DRIVER_PATCH_VER	7
+#define QLA_DRIVER_BETA_VER	100
Signature · 1 line
2.19.0.rc0
Reviewed-by on v1 10/10
#20 lore raw

Re: [PATCH 10/10] qla2xxx: Update version to 10.02.07.100-k

Quoted 29 lines · Nilesh Javali

---
drivers/scsi/qla2xxx/qla_version.h | 6 +++---

1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_version.h +3 -3
index 055040cbef9b..4b117165bf8b 100644
@@ -6,9 +6,9 @@
 /*
 * Driver version
 */
-#define QLA2XXX_VERSION      "10.02.06.200-k"
+#define QLA2XXX_VERSION      "10.02.07.100-k"
 
 #define QLA_DRIVER_MAJOR_VER	10
 #define QLA_DRIVER_MINOR_VER	2
-#define QLA_DRIVER_PATCH_VER	6
-#define QLA_DRIVER_BETA_VER	200
+#define QLA_DRIVER_PATCH_VER	7
+#define QLA_DRIVER_BETA_VER	100
Signature · 1 line
2.19.0.rc0

--
Himanshu Madhani Oracle Linux Engineering

#21 lore raw
In reply to Nilesh Javali

On 9/8/21 12:28 AM, Nilesh Javali wrote:> Martin,

Quoted 7 lines

Please apply the qla2xxx driver bug fixes to the scsi tree at your earliest convenience.

Thanks,
Nilesh

why linux-nvme ?

Quoted 11 lines
  drivers/scsi/qla2xxx/qla_attr.c    | 24 ++++++++-
  drivers/scsi/qla2xxx/qla_bsg.c     | 48 +++++++++++++++++
  drivers/scsi/qla2xxx/qla_bsg.h     |  7 +++
  drivers/scsi/qla2xxx/qla_def.h     |  4 +-
  drivers/scsi/qla2xxx/qla_gbl.h     |  4 ++
  drivers/scsi/qla2xxx/qla_gs.c      |  3 +-
  drivers/scsi/qla2xxx/qla_init.c    | 17 +++---
  drivers/scsi/qla2xxx/qla_mbx.c     | 33 ++++++++++++
  drivers/scsi/qla2xxx/qla_nvme.c    | 20 ++++++-
  drivers/scsi/qla2xxx/qla_os.c      | 86 +++++++++++++++---------------
  drivers/scsi/qla2xxx/qla_version.h |  6 +--

no drivers/nvme/ in the above change log.

Quoted 5 lines
  11 files changed, 191 insertions(+), 61 deletions(-)

base-commit: 9b5ac8ab4e8bf5636d1d425aee68ddf45af12057

author maintainer
#22 lore raw

Chaitanya,

Quoted 15 lines

-----Original Message-----
From: Chaitanya Kulkarni <[email protected]>
Sent: Wednesday, September 8, 2021 1:28 PM
To: Nilesh Javali <[email protected]>; [email protected]; linux- [email protected]
Cc: [email protected]; GR-QLogic-Storage-Upstream <GR-QLogic- [email protected]>; [email protected]; [email protected]
Subject: [EXT] Re: [PATCH 00/10] qla2xxx driver bug fixes

External Email

----------------------------------------------------------------------
On 9/8/21 12:28 AM, Nilesh Javali wrote:> Martin,

Quoted 1 line
Quoted 8 lines
Quoted 6 lines

Please apply the qla2xxx driver bug fixes to the scsi tree at your earliest convenience.

Thanks,
Nilesh

why linux-nvme ?

Please ignore. This is meant for Linux-scsi only. I apologize for mistakenly sending it to Linux-nvme.

--
Nilesh