Skip to contentSkip to conversation

spi: dt-bindings: xilinx: Drop type reference on *-bits properties

PATCH Applied Rob Herring 2 participants 3 messages Sep 10, 2021

Subsystems (3)
Device tree bindings SPI Arm/Zynq architecture
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 spi: dt-bindings: xilinx: Drop type reference on *-bits properties

Properties with standard unit suffixes such as '-bits' don't need a type.

Cc Mark Brown <[email protected]>
Cc Michal Simek <[email protected]>
Cc [email protected]
Cc [email protected]
Signed-off-by Rob Herring <[email protected]>

---
Mark, Please ack and I will send to Linus for rc1. After this, I can enable checking these automatically.

 Documentation/devicetree/bindings/spi/spi-xilinx.yaml | 2 --
 1 file changed, 2 deletions(-)
Documentation/devicetree/bindings/spi/spi-xilinx.yaml +0 -2
index 593f7693bace..03e5dca7e933 100644
@@ -27,13 +27,11 @@ properties:
 
   xlnx,num-ss-bits:
     description: Number of chip selects used.
-    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 32
 
   xlnx,num-transfer-bits:
     description: Number of bits per transfer. This will be 8 if not specified.
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [8, 16, 32]
     default: 8
Signature · 1 line
2.30.2
author maintainer Applied
#2 lore raw
In reply to Rob Herring
Quoted 8 lines · Rob Herring

Properties with standard unit suffixes such as '-bits' don't need a type.

Cc Mark Brown <[email protected]>
Cc Michal Simek <[email protected]>
Cc [email protected]
Cc [email protected]
Signed-off-by Rob Herring <[email protected]>
Quoted 7 lines

---
Mark, Please ack and I will send to Linus for rc1. After this, I can enable checking these automatically.

 Documentation/devicetree/bindings/spi/spi-xilinx.yaml | 2 --
 1 file changed, 2 deletions(-)

Applied, thanks!