Skip to contentSkip to conversation

Add the driver for Intel Keem Bay SoC timer block

PATCH Superseded [email protected] 2 participants 5 messages Sep 13, 2021 – Sep 17, 2021

Subsystems (2)

v7 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v7 cover Add the driver for Intel Keem Bay SoC timer block

From: Shruthi Sanil <[email protected]>

The timer block supports 1 64-bit free running counter and 8 32-bit general purpose timers.

Patch 1 holds the device tree binding documentation. Patch 2 holds the device driver.

This driver is tested on the Keem Bay evaluation module board.

Changes since v6:
- Removed the unused compatible string from the mfd device node to fix the error thrown by the make dt-binding command.

Changes since v5:
- Created a MFD device for the common configuration register in the device tree bindings.
- Updated the timer driver with the MFD framework to access the common configuration register.

Changes since v4:
- Updated the description in the device tree bindings.
- Updated the unit address of all the timers and counter in the device tree binding.

Changes since v3:
- Update in KConfig file to support COMPILE_TEST for Keem Bay timer.
- Update in device tree bindings to remove status field.
- Update in device tree bindings to remove 64-bit address space for the child nodes by using non-empty ranges.

Changes since v2:
- Add multi timer support.
- Update in the device tree binding to support multi timers.
- Code optimization.

Changes since v1:
- Add support for KEEMBAY_TIMER to get selected through Kconfig.platforms.
- Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature.
- Avoid overlapping reg regions across 2 device nodes.
- Simplify 2 device nodes as 1 because both are from same IP block.
- Adapt the driver code according to the new simplified devicetree.

Shruthi Sanil (2):
dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer
clocksource: Add Intel Keem Bay timer support

 .../bindings/timer/intel,keembay-timer.yaml   | 172 ++++++++++++
 MAINTAINERS                                   |   5 +
 drivers/clocksource/Kconfig                   |  11 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-keembay.c           | 252 ++++++++++++++++++
 5 files changed, 441 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
 create mode 100644 drivers/clocksource/timer-keembay.c

base-commit: 6880fa6c56601bb8ed59df6c30fd390cc5f6dd8f

Signature · 1 line
2.17.1
#1 lore raw

PATCH v7 1/2 dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer

From: Shruthi Sanil <[email protected]>

Add Device Tree bindings for the Timer IP, which can be used as clocksource and clockevent device in the Intel Keem Bay SoC.

---
 .../bindings/timer/intel,keembay-timer.yaml   | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml new file +172 -0
new file mode 100644
index 000000000000..80e7785845ac
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/intel,keembay-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay SoC Timers
+
+maintainers:
+  - Shruthi Sanil <[email protected]>
+
+description: |
+  The Intel Keem Bay timer driver supports 1 free running counter and 8 timers.
+  Each timer is capable of generating inividual interrupt.
+  Both the features are enabled through the timer general config register.
+
+  The parent node represents the common general configuration details and
+  the child nodes represents the counter and timers.
+
+properties:
+  compatible:
+    enum:
+      - simple-mfd
+
+  reg:
+    description: General configuration register address and length.
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^counter@[0-9a-f]+$":
+    type: object
+    description: Properties for Intel Keem Bay counter
+
+    properties:
+      compatible:
+        enum:
+          - intel,keembay-counter
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+
+  "^timer@[0-9a-f]+$":
+    type: object
+    description: Properties for Intel Keem Bay timer
+
+    properties:
+      compatible:
+        enum:
+          - intel,keembay-timer
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_TIM
+
+    soc {
+        #address-cells = <0x2>;
+        #size-cells = <0x2>;
+
+        gpt@20331000 {
+            compatible = "simple-mfd";
+            reg = <0x0 0x20331000 0x0 0xc>;
+            ranges = <0x0 0x0 0x20330000 0xF0>;
+            #address-cells = <0x1>;
+            #size-cells = <0x1>;
+
+            counter@e8 {
+                compatible = "intel,keembay-counter";
+                reg = <0xe8 0x8>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@10 {
+                compatible = "intel,keembay-timer";
+                reg = <0x10 0xc>;
+                interrupts = <GIC_SPI 0x3 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@20 {
+                compatible = "intel,keembay-timer";
+                reg = <0x20 0xc>;
+                interrupts = <GIC_SPI 0x4 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@30 {
+                compatible = "intel,keembay-timer";
+                reg = <0x30 0xc>;
+                interrupts = <GIC_SPI 0x5 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@40 {
+                compatible = "intel,keembay-timer";
+                reg = <0x40 0xc>;
+                interrupts = <GIC_SPI 0x6 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@50 {
+                compatible = "intel,keembay-timer";
+                reg = <0x50 0xc>;
+                interrupts = <GIC_SPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@60 {
+                compatible = "intel,keembay-timer";
+                reg = <0x60 0xc>;
+                interrupts = <GIC_SPI 0x8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@70 {
+                compatible = "intel,keembay-timer";
+                reg = <0x70 0xc>;
+                interrupts = <GIC_SPI 0x9 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@80 {
+                compatible = "intel,keembay-timer";
+                reg = <0x80 0xc>;
+                interrupts = <GIC_SPI 0xa IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+        };
+    };
+
+...
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH v7 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer

Quoted 31 lines · On Mon, Sep 13, 2021 at 11:19:54PM +0530, [email protected] wrote:

From: Shruthi Sanil <[email protected]>

Add Device Tree bindings for the Timer IP, which can be used as clocksource and clockevent device in the Intel Keem Bay SoC.

---
 .../bindings/timer/intel,keembay-timer.yaml   | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml new file +13 -0
new file mode 100644
index 000000000000..80e7785845ac
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/intel,keembay-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay SoC Timers
+
+maintainers:
+  - Shruthi Sanil <[email protected]>
+
+description: |
+  The Intel Keem Bay timer driver supports 1 free running counter and 8 timers.

Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml line 23

Quoted 10 lines
Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml new file +10 -0
+  Each timer is capable of generating inividual interrupt.
+  Both the features are enabled through the timer general config register.
+
+  The parent node represents the common general configuration details and
+  the child nodes represents the counter and timers.
+
+properties:
+  compatible:
+    enum:
+      - simple-mfd

Removing is not the right solution. What you need is:

items:
- const: intel,keembay-gpt-creg
- const: simple-mfd

Quoted 153 lines
Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml new file +149 -0
+
+  reg:
+    description: General configuration register address and length.
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^counter@[0-9a-f]+$":
+    type: object
+    description: Properties for Intel Keem Bay counter
+
+    properties:
+      compatible:
+        enum:
+          - intel,keembay-counter
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+
+  "^timer@[0-9a-f]+$":
+    type: object
+    description: Properties for Intel Keem Bay timer
+
+    properties:
+      compatible:
+        enum:
+          - intel,keembay-timer
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_TIM
+
+    soc {
+        #address-cells = <0x2>;
+        #size-cells = <0x2>;
+
+        gpt@20331000 {
+            compatible = "simple-mfd";
+            reg = <0x0 0x20331000 0x0 0xc>;
+            ranges = <0x0 0x0 0x20330000 0xF0>;
+            #address-cells = <0x1>;
+            #size-cells = <0x1>;
+
+            counter@e8 {
+                compatible = "intel,keembay-counter";
+                reg = <0xe8 0x8>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@10 {
+                compatible = "intel,keembay-timer";
+                reg = <0x10 0xc>;
+                interrupts = <GIC_SPI 0x3 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@20 {
+                compatible = "intel,keembay-timer";
+                reg = <0x20 0xc>;
+                interrupts = <GIC_SPI 0x4 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@30 {
+                compatible = "intel,keembay-timer";
+                reg = <0x30 0xc>;
+                interrupts = <GIC_SPI 0x5 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@40 {
+                compatible = "intel,keembay-timer";
+                reg = <0x40 0xc>;
+                interrupts = <GIC_SPI 0x6 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@50 {
+                compatible = "intel,keembay-timer";
+                reg = <0x50 0xc>;
+                interrupts = <GIC_SPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@60 {
+                compatible = "intel,keembay-timer";
+                reg = <0x60 0xc>;
+                interrupts = <GIC_SPI 0x8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@70 {
+                compatible = "intel,keembay-timer";
+                reg = <0x70 0xc>;
+                interrupts = <GIC_SPI 0x9 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@80 {
+                compatible = "intel,keembay-timer";
+                reg = <0x80 0xc>;
+                interrupts = <GIC_SPI 0xa IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+        };
+    };
+
+...
Signature · 1 line
2.17.1
#3 lore raw

RE: [PATCH v7 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer

Quoted 62 lines

-----Original Message-----
From: Rob Herring <[email protected]>
Sent: Friday, September 17, 2021 1:30 AM
To: Sanil, Shruthi <[email protected]>
Cc: [email protected]; [email protected]; linux- [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Thokala, Srikanth <[email protected]>; Raja Subramanian, Lakshmi Bai <[email protected]>; Sangannavar, Mallikarjunappa <[email protected]>
Subject: Re: [PATCH v7 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer

Documentation/devicetree/bindings/timer/intel,keembay-

Quoted 20 lines · On Mon, Sep 13, 2021 at 11:19:54PM +0530, [email protected] wrote:

From: Shruthi Sanil <[email protected]>

Add Device Tree bindings for the Timer IP, which can be used as clocksource and clockevent device in the Intel Keem Bay SoC.

---
 .../bindings/timer/intel,keembay-timer.yaml   | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644

Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml

diff --git a/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml b/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml new file mode 100644
index 000000000000..80e7785845ac

Documentation/devicetree/bindings/timer/intel,keembay- new file +0 -0

timer.yaml

Documentation/devicetree/bindings/timer/intel,keembay- line 12

Quoted 13 lines
Documentation/devicetree/bindings/timer/intel,keembay- new file +12 -0
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/intel,keembay-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay SoC Timers
+
+maintainers:
+  - Shruthi Sanil <[email protected]>
+
+description: |
+  The Intel Keem Bay timer driver supports 1 free running counter and 8

timers.

Documentation/devicetree/bindings/timer/intel,keembay- line 22

Quoted 10 lines
Documentation/devicetree/bindings/timer/intel,keembay- new file +10 -0
+  Each timer is capable of generating inividual interrupt.
+  Both the features are enabled through the timer general config register.
+
+  The parent node represents the common general configuration details
+ and  the child nodes represents the counter and timers.
+
+properties:
+  compatible:
+    enum:
+      - simple-mfd

Removing is not the right solution. What you need is:

Quoted 4 lines

items:
- const: intel,keembay-gpt-creg
- const: simple-mfd

Thank You Rob! I'll update accordingly and submit the patch.

Quoted 153 lines
Quoted 153 lines
Documentation/devicetree/bindings/timer/intel,keembay- new file +149 -1
+
+  reg:
+    description: General configuration register address and length.
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^counter@[0-9a-f]+$":
+    type: object
+    description: Properties for Intel Keem Bay counter
+
+    properties:
+      compatible:
+        enum:
+          - intel,keembay-counter
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+
+  "^timer@[0-9a-f]+$":
+    type: object
+    description: Properties for Intel Keem Bay timer
+
+    properties:
+      compatible:
+        enum:
+          - intel,keembay-timer
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_TIM
+
+    soc {
+        #address-cells = <0x2>;
+        #size-cells = <0x2>;
+
+        gpt@20331000 {
+            compatible = "simple-mfd";
+            reg = <0x0 0x20331000 0x0 0xc>;
+            ranges = <0x0 0x0 0x20330000 0xF0>;
+            #address-cells = <0x1>;
+            #size-cells = <0x1>;
+
+            counter@e8 {
+                compatible = "intel,keembay-counter";
+                reg = <0xe8 0x8>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@10 {
+                compatible = "intel,keembay-timer";
+                reg = <0x10 0xc>;
+                interrupts = <GIC_SPI 0x3 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@20 {
+                compatible = "intel,keembay-timer";
+                reg = <0x20 0xc>;
+                interrupts = <GIC_SPI 0x4 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@30 {
+                compatible = "intel,keembay-timer";
+                reg = <0x30 0xc>;
+                interrupts = <GIC_SPI 0x5 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@40 {
+                compatible = "intel,keembay-timer";
+                reg = <0x40 0xc>;
+                interrupts = <GIC_SPI 0x6 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@50 {
+                compatible = "intel,keembay-timer";
+                reg = <0x50 0xc>;
+                interrupts = <GIC_SPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@60 {
+                compatible = "intel,keembay-timer";
+                reg = <0x60 0xc>;
+                interrupts = <GIC_SPI 0x8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@70 {
+                compatible = "intel,keembay-timer";
+                reg = <0x70 0xc>;
+                interrupts = <GIC_SPI 0x9 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+
+            timer@80 {
+                compatible = "intel,keembay-timer";
+                reg = <0x80 0xc>;
+                interrupts = <GIC_SPI 0xa IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+            };
+        };
+    };
+
+...
--

2.17.1

#4 lore raw

PATCH v7 2/2 clocksource: Add Intel Keem Bay timer support

In reply to [email protected]

From: Shruthi Sanil <[email protected]>

The Intel Keem Bay timer driver supports clocksource and clockevent features for the timer IP used in Intel Keem Bay SoC.
The timer block supports 1 free running counter and 8 timers. The free running counter can be used as a clocksource and the timers can be used as clockevent. Each timer is capable of generating individual interrupt.
Both the features are enabled through the timer general config register.

---
 MAINTAINERS                         |   5 +
 drivers/clocksource/Kconfig         |  11 ++
 drivers/clocksource/Makefile        |   1 +
 drivers/clocksource/timer-keembay.c | 252 ++++++++++++++++++++++++++++
 4 files changed, 269 insertions(+)
 create mode 100644 drivers/clocksource/timer-keembay.c
MAINTAINERS +5 -0
index eeb4c70b3d5b..1f58350f5f3c 100644
@@ -9523,6 +9523,11 @@ F:	drivers/crypto/keembay/keembay-ocs-hcu-core.c
 F:	drivers/crypto/keembay/ocs-hcu.c
 F:	drivers/crypto/keembay/ocs-hcu.h
 
+INTEL KEEM BAY TIMER SUPPORT
+M:	Shruthi Sanil <[email protected]>
+S:	Maintained
+F:	drivers/clocksource/timer-keembay.c
+
 INTEL MANAGEMENT ENGINE (mei)
 M:	Tomas Winkler <[email protected]>
 L:	[email protected]
drivers/clocksource/Kconfig +11 -0
index 0f5e3983951a..0dcf2c5aaaf2 100644
@@ -708,4 +708,15 @@ config MICROCHIP_PIT64B
 	  modes and high resolution. It is used as a clocksource
 	  and a clockevent.
 
+config KEEMBAY_TIMER
+	bool "Intel Keem Bay timer"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	select TIMER_OF
+	help
+	  This option enables the support for the Intel Keem Bay
+	  general purpose timer and free running counter driver.
+	  Each timer can generate an individual interrupt and
+	  supports oneshot and periodic modes.
+	  The 64-bit counter can be used as a clock source.
+
 endmenu
drivers/clocksource/Makefile +1 -0
index c17ee32a7151..ea319063ba47 100644
@@ -88,3 +88,4 @@ obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
 obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
 obj-$(CONFIG_HYPERV_TIMER)		+= hyperv_timer.o
 obj-$(CONFIG_MICROCHIP_PIT64B)		+= timer-microchip-pit64b.o
+obj-$(CONFIG_KEEMBAY_TIMER)		+= timer-keembay.o
drivers/clocksource/timer-keembay.c new file +252 -0

252 lines not on this page · raw message

Signature · 1 line
2.17.1