ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode

Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting.

Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board.

---
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 8077f1716fbc..ecb91fb899ff 100644
@@ -112,7 +112,7 @@ &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

2.33.0