Skip to contentSkip to conversation

staging: r8188eu: Shorten and simplify calls chains

PATCH Superseded Fabio M. De Francesco 4 participants 28 messages Sep 15, 2021 – Sep 16, 2021 Staging

v6 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v6 cover staging: r8188eu: Shorten and simplify calls chains

io_ops abstraction is useless in this driver, since there is only one ops registration. Without io_ops we can get rid of indirect calls mess and shorten the calls chain.

Shorten the calls chain of rtw_read8/16/32() down to the actual reads. For this purpose unify the three usb_read8/16/32 into the new usb_read(); make the latter parameterizable with 'size'; embed most of the code of usbctrl_vendorreq() into usb_read() and use in it the new usb_control_msg_recv() API of USB Core.

Shorten the calls chain of rtw_write8/16/32() down to the actual writes. For this purpose unify the four usb_write8/16/32/N() into the new usb_write(); make the latter parameterizable with 'size'; embed most of the code of usbctrl_vendorreq() into usb_write() and use in it the new usb_control_msg_send() API of USB Core.

The code with the modifications was thoroughly tested by Pavel Skripkin using a TP-Link TL-WN722N v2 / v3 [Realtek RTL8188EUS] and by Fabio M. De Francesco using a ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano].

Changelog:

v5->v6:
- 1-14:
Minimal changes to patch subjects to achieve consistent style;
- 15:
Fix a mistake in the checks of values returned by usb_control_msg();
- 16-19:
No changes.

v4->v5:
- 1-14:
No changes;
- 15-16:
Fix minor formatting issues and use "Reverse Xmas Tree" style, according to suggestions by David Laight and Dan Carpenter;
- 17-18:
Pavel Skripkin found logical errors in the checks of the values returned by usb_control_msg_{recv,send}(), so fix them; Dan Carpenter suggested to do error handling before success handling, so change the code accordingly;
- 19:
Add this patch in order to get rid of the shared buffer in usb_read() and usb_write() and remove this field from struct "dvobj_priv".

v3->v4:
- 1-14:
Split a patch into fourteen;
- 15-16:
Add these patches for clean-ups of the code that is going to be reused in 17-18/18;
- 17-18:
Make some changes according to a first review of Greg Kroah-Hartman; furthermore, remove the unnecessary while loop and a couple of if' test; handle the errors returned by usb_control_msg_recv().

v2->v3:
- 1-2:
No changes;
- 3:
Fix the version number of the patch.

v1->v2:
- 1-2:
No changes;
- 3:
Replace parameter REALTEK_USB_VENQT_READ with REALTEK_USB_VENQT_WRITE in usb_control_msg_send().

v1: https://lore.kernel.org/lkml/[email protected]/
v2: https://lore.kernel.org/lkml/[email protected]/
v3: https://lore.kernel.org/lkml/[email protected]/
v4: https://lore.kernel.org/lkml/[email protected]/
v5: https://lore.kernel.org/lkml/[email protected]/

Fabio M. De Francesco (4):
staging: r8188eu: Clean up usbctrl_vendorreq()
staging: r8188eu: Clean up rtw_read8/16/32() and rtw_write8/16/32/N()
staging: r8188eu: Shorten calls chains of rtw_read8/16/32()
staging: r8188eu: Shorten calls chains of rtw_write8/16/32/N()

Pavel Skripkin (15):
staging: r8188eu: remove usb_{read,write}_mem()
staging: r8188eu: remove the helpers of rtw_read8()
staging: r8188eu: remove the helpers of rtw_read16()
staging: r8188eu: remove the helpers of rtw_read32()
staging: r8188eu: remove the helpers of usb_write8()
staging: r8188eu: remove the helpers of usb_write16()
staging: r8188eu: remove the helpers of usb_write32()
staging: r8188eu: remove the helpers of usb_writeN()
staging: r8188eu: remove the helpers of usb_read_port()
staging: r8188eu: remove the helpers of usb_write_port()
staging: r8188eu: remove the helpers of usb_read_port_cancel()
staging: r8188eu: remove the helpers of usb_write_port_cancel()
staging: r8188eu: remove core/rtw_io.c
staging: remove struct _io_ops
staging: r8188eu: remove shared buffer for usb requests

 drivers/staging/r8188eu/Makefile              |   1 -
 drivers/staging/r8188eu/core/rtw_io.c         | 299 ------------------
 drivers/staging/r8188eu/hal/usb_halinit.c     |   6 +-
 drivers/staging/r8188eu/hal/usb_ops_linux.c   | 261 ++++++++-------
 drivers/staging/r8188eu/include/drv_types.h   |   5 -
 drivers/staging/r8188eu/include/rtw_io.h      |  89 +-----
 drivers/staging/r8188eu/include/usb_ops.h     |   2 -
 .../staging/r8188eu/include/usb_ops_linux.h   |   8 -
 drivers/staging/r8188eu/os_dep/usb_intf.c     |  37 +--
 .../staging/r8188eu/os_dep/usb_ops_linux.c    |  20 +-
 10 files changed, 166 insertions(+), 562 deletions(-)
 delete mode 100644 drivers/staging/r8188eu/core/rtw_io.c
Signature · 1 line
2.33.0
#1 lore raw

PATCH v6 1/19 staging: r8188eu: remove usb_{read,write}_mem()

From: Pavel Skripkin <[email protected]>

Remove usb_{read,write}_mem() because they are unused.

---
 drivers/staging/r8188eu/core/rtw_io.c         | 29 -------------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c   |  2 --
 drivers/staging/r8188eu/include/rtw_io.h      |  4 ---
 .../staging/r8188eu/include/usb_ops_linux.h   |  3 --
 .../staging/r8188eu/os_dep/usb_ops_linux.c    |  8 -----
 5 files changed, 46 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -29
index cde0205816b1..e6f377377ab2 100644
@@ -175,35 +175,6 @@ int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val)
 	return RTW_STATUS_CODE(ret);
 }
 
-void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
-{
-	void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-
-
-	if (adapter->bDriverStopped || adapter->bSurpriseRemoved)
-	     return;
-	_read_mem = pintfhdl->io_ops._read_mem;
-	_read_mem(pintfhdl, addr, cnt, pmem);
-
-}
-
-void _rtw_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
-{
-	void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-
-
-
-	_write_mem = pintfhdl->io_ops._write_mem;
-
-	_write_mem(pintfhdl, addr, cnt, pmem);
-
-
-}
-
 void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
 {
 	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -2
index 065b0d8e030a..7f30b00b3ce6 100644
@@ -541,13 +541,11 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 	pops->_read8 = &usb_read8;
 	pops->_read16 = &usb_read16;
 	pops->_read32 = &usb_read32;
-	pops->_read_mem = &usb_read_mem;
 	pops->_read_port = &usb_read_port;
 	pops->_write8 = &usb_write8;
 	pops->_write16 = &usb_write16;
 	pops->_write32 = &usb_write32;
 	pops->_writeN = &usb_writeN;
-	pops->_write_mem = &usb_write_mem;
 	pops->_write_port = &usb_write_port;
 	pops->_read_port_cancel = &usb_read_port_cancel;
 	pops->_write_port_cancel = &usb_write_port_cancel;
drivers/staging/r8188eu/include/rtw_io.h +0 -4
index 263a37d49b6e..5ef89c72cc83 100644
@@ -270,8 +270,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 #define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr))
 #define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
 #define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
-#define rtw_read_mem(adapter, addr, cnt, mem)				\
-	_rtw_read_mem((adapter), (addr), (cnt), (mem))
 #define rtw_read_port(adapter, addr, cnt, mem)				\
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
@@ -290,8 +288,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_write16_async((adapter), (addr), (val))
 #define rtw_write32_async(adapter, addr, val)				\
 	_rtw_write32_async((adapter), (addr), (val))
-#define rtw_write_mem(adapter, addr, cnt, mem)				\
-	_rtw_write_mem((adapter), (addr), (cnt), (mem))
 #define rtw_write_port(adapter, addr, cnt, mem)				\
 	_rtw_write_port((adapter), (addr), (cnt), (mem))
 #define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms)	\
drivers/staging/r8188eu/include/usb_ops_linux.h +0 -3
index c357a3b1560e..37e0614fd15c 100644
@@ -28,9 +28,6 @@
 
 unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
 
-void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem);
-void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
-
 void usb_read_port_cancel(struct intf_hdl *pintfhdl);
 
 u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
drivers/staging/r8188eu/os_dep/usb_ops_linux.c +0 -8
index 928730158450..9afb4df71969 100644
@@ -31,14 +31,6 @@ struct zero_bulkout_context {
 	void *padapter;
 };
 
-void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
-{
-}
-
-void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
-{
-}
-
 void usb_read_port_cancel(struct intf_hdl *pintfhdl)
 {
 	int i;
Signature · 1 line
2.33.0
#2 lore raw

PATCH v6 2/19 staging: r8188eu: remove the helpers of rtw_read8()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_read8() and usb_read8() and embed their code into the caller (i.e., rtw_read8()).

_rtw_read8() is a mere redefinition of rtw_read8() and it is unneeded. usb_read8() was the only functions assigned to (*_usb_read8) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 14 --------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c |  5 +++--
 drivers/staging/r8188eu/include/rtw_io.h    |  3 +--
 3 files changed, 4 insertions(+), 18 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -14
index e6f377377ab2..4c43b6d00178 100644
@@ -34,20 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-u8 _rtw_read8(struct adapter *adapter, u32 addr)
-{
-	u8 r_val;
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl *pintfhdl = &pio_priv->intf;
-	u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr);
-
-
-	_read8 = pintfhdl->io_ops._read8;
-	r_val = _read8(pintfhdl, addr);
-
-	return r_val;
-}
-
 u16 _rtw_read16(struct adapter *adapter, u32 addr)
 {
 	u16 r_val;
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -2
index 7f30b00b3ce6..8389deeb1182 100644
@@ -97,8 +97,10 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 	return status;
 }
 
-static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
+u8 rtw_read8(struct adapter *adapter, u32 addr)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
 	u8 data;
 
@@ -538,7 +540,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_read8 = &usb_read8;
 	pops->_read16 = &usb_read16;
 	pops->_read32 = &usb_read32;
 	pops->_read_port = &usb_read_port;
drivers/staging/r8188eu/include/rtw_io.h +1 -2
index 5ef89c72cc83..9dc32f7bcae8 100644
@@ -245,7 +245,7 @@ void unregister_intf_hdl(struct intf_hdl *pintfhdl);
 void _rtw_attrib_read(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 
-u8 _rtw_read8(struct adapter *adapter, u32 addr);
+u8 rtw_read8(struct adapter *adapter, u32 addr);
 u16 _rtw_read16(struct adapter *adapter, u32 addr);
 u32 _rtw_read32(struct adapter *adapter, u32 addr);
 void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
@@ -267,7 +267,6 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
 void _rtw_write_port_cancel(struct adapter *adapter);
 
-#define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr))
 #define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
 #define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
 #define rtw_read_port(adapter, addr, cnt, mem)				\
Signature · 1 line
2.33.0
#3 lore raw

PATCH v6 3/19 staging: r8188eu: remove the helpers of rtw_read16()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_read16() and usb_read16() and embed their code into the caller (i.e., rtw_read16()).

_rtw_read16() is a mere redefinition of rtw_read16() and it is unneeded. usb_read16() was the only functions assigned to the (*_usb_read16) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 14 --------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c |  5 +++--
 drivers/staging/r8188eu/include/rtw_io.h    |  3 +--
 3 files changed, 4 insertions(+), 18 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -14
index 4c43b6d00178..b5d1c8e52b22 100644
@@ -34,20 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-u16 _rtw_read16(struct adapter *adapter, u32 addr)
-{
-	u16 r_val;
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-	u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
-
-	_read16 = pintfhdl->io_ops._read16;
-
-	r_val = _read16(pintfhdl, addr);
-
-	return r_val;
-}
-
 u32 _rtw_read32(struct adapter *adapter, u32 addr)
 {
 	u32 r_val;
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -2
index 8389deeb1182..8b4fc014d93a 100644
@@ -109,8 +109,10 @@ u8 rtw_read8(struct adapter *adapter, u32 addr)
 	return data;
 }
 
-static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
+u16 rtw_read16(struct adapter *adapter, u32 addr)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
 	__le32 data;
 
@@ -540,7 +542,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_read16 = &usb_read16;
 	pops->_read32 = &usb_read32;
 	pops->_read_port = &usb_read_port;
 	pops->_write8 = &usb_write8;
drivers/staging/r8188eu/include/rtw_io.h +1 -2
index 9dc32f7bcae8..527503d3ecc8 100644
@@ -246,7 +246,7 @@ void _rtw_attrib_read(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 
 u8 rtw_read8(struct adapter *adapter, u32 addr);
-u16 _rtw_read16(struct adapter *adapter, u32 addr);
+u16 rtw_read16(struct adapter *adapter, u32 addr);
 u32 _rtw_read32(struct adapter *adapter, u32 addr);
 void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
@@ -267,7 +267,6 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
 void _rtw_write_port_cancel(struct adapter *adapter);
 
-#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
 #define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
 #define rtw_read_port(adapter, addr, cnt, mem)				\
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
Signature · 1 line
2.33.0
#4 lore raw

PATCH v6 4/19 staging: r8188eu: remove the helpers of rtw_read32()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_readr32() and usb_read32() and embed their code into the caller (i.e., rtw_read32()).

_rtw_read32() is a mere redefinition of rtw_read32() and it is unneeded. usb_read32() was the only functions assigned to the (*_usb_read32) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 14 --------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c |  5 +++--
 drivers/staging/r8188eu/include/rtw_io.h    |  3 +--
 3 files changed, 4 insertions(+), 18 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -14
index b5d1c8e52b22..cb24500cbc6e 100644
@@ -34,20 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-u32 _rtw_read32(struct adapter *adapter, u32 addr)
-{
-	u32 r_val;
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-	u32	(*_read32)(struct intf_hdl *pintfhdl, u32 addr);
-
-	_read32 = pintfhdl->io_ops._read32;
-
-	r_val = _read32(pintfhdl, addr);
-
-	return r_val;
-}
-
 int _rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 {
 	struct io_priv *pio_priv = &adapter->iopriv;
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -2
index 8b4fc014d93a..39fd9994787d 100644
@@ -121,8 +121,10 @@ u16 rtw_read16(struct adapter *adapter, u32 addr)
 	return (u16)(le32_to_cpu(data) & 0xffff);
 }
 
-static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
+u32 rtw_read32(struct adapter *adapter, u32 addr)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
 	__le32 data;
 
@@ -542,7 +544,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_read32 = &usb_read32;
 	pops->_read_port = &usb_read_port;
 	pops->_write8 = &usb_write8;
 	pops->_write16 = &usb_write16;
drivers/staging/r8188eu/include/rtw_io.h +1 -2
index 527503d3ecc8..c53d9c8bd9a7 100644
@@ -247,7 +247,7 @@ void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 
 u8 rtw_read8(struct adapter *adapter, u32 addr);
 u16 rtw_read16(struct adapter *adapter, u32 addr);
-u32 _rtw_read32(struct adapter *adapter, u32 addr);
+u32 rtw_read32(struct adapter *adapter, u32 addr);
 void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port_cancel(struct adapter *adapter);
@@ -267,7 +267,6 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
 void _rtw_write_port_cancel(struct adapter *adapter);
 
-#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
 #define rtw_read_port(adapter, addr, cnt, mem)				\
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
Signature · 1 line
2.33.0
#5 lore raw

PATCH v6 5/19 staging: r8188eu: remove the helpers of usb_write8()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_write8() and usb_write8() and embed their code into the caller (i.e., rtw_write8()).

_rtw_write8() is a mere redefinition of rtw_write8() and it is unneeded. usb_write8() was the only functions assigned to the (*_usb_write8) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 15 ---------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 10 +++++++---
 drivers/staging/r8188eu/include/rtw_io.h    |  4 +---
 3 files changed, 8 insertions(+), 21 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -15
index cb24500cbc6e..69ab6e24a4b7 100644
@@ -34,21 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-int _rtw_write8(struct adapter *adapter, u32 addr, u8 val)
-{
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-	int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
-	int ret;
-
-	_write8 = pintfhdl->io_ops._write8;
-
-	ret = _write8(pintfhdl, addr, val);
-
-
-	return RTW_STATUS_CODE(ret);
-}
-
 int _rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 {
 	struct io_priv *pio_priv = &adapter->iopriv;
drivers/staging/r8188eu/hal/usb_ops_linux.c +7 -3
index 39fd9994787d..69e64863a5d1 100644
@@ -133,11 +133,16 @@ u32 rtw_read32(struct adapter *adapter, u32 addr)
 	return le32_to_cpu(data);
 }
 
-static int usb_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val)
+int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
+	int ret;
+
+	ret = usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, REALTEK_USB_VENQT_WRITE);
 
-	return usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, REALTEK_USB_VENQT_WRITE);
+	return RTW_STATUS_CODE(ret);
 }
 
 static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
@@ -545,7 +550,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
 	pops->_read_port = &usb_read_port;
-	pops->_write8 = &usb_write8;
 	pops->_write16 = &usb_write16;
 	pops->_write32 = &usb_write32;
 	pops->_writeN = &usb_writeN;
drivers/staging/r8188eu/include/rtw_io.h +1 -3
index c53d9c8bd9a7..3b229027f094 100644
@@ -252,7 +252,7 @@ void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port_cancel(struct adapter *adapter);
 
-int _rtw_write8(struct adapter *adapter, u32 addr, u8 val);
+int rtw_write8(struct adapter *adapter, u32 addr, u8 val);
 int _rtw_write16(struct adapter *adapter, u32 addr, u16 val);
 int _rtw_write32(struct adapter *adapter, u32 addr, u32 val);
 int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
@@ -271,8 +271,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
 
-#define  rtw_write8(adapter, addr, val)					\
-	_rtw_write8((adapter), (addr), (val))
 #define  rtw_write16(adapter, addr, val)				\
 	_rtw_write16((adapter), (addr), (val))
 #define  rtw_write32(adapter, addr, val)				\
Signature · 1 line
2.33.0
#6 lore raw

PATCH v6 6/19 staging: r8188eu: remove the helpers of usb_write16()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_write16() and usb_write16() and embed their code into the caller (i.e., rtw_write16()).

_rtw_write16() is a mere redefinition of rtw_write16() and it is unneeded. usb_write16() was the only functions assigned to the (*_usb_write16) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 14 --------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 10 +++++++---
 drivers/staging/r8188eu/include/rtw_io.h    |  4 +---
 3 files changed, 8 insertions(+), 20 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -14
index 69ab6e24a4b7..7547e25d870b 100644
@@ -34,20 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-int _rtw_write16(struct adapter *adapter, u32 addr, u16 val)
-{
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-	int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
-	int ret;
-
-	_write16 = pintfhdl->io_ops._write16;
-
-	ret = _write16(pintfhdl, addr, val);
-
-
-	return RTW_STATUS_CODE(ret);
-}
 int _rtw_write32(struct adapter *adapter, u32 addr, u32 val)
 {
 	struct io_priv *pio_priv = &adapter->iopriv;
drivers/staging/r8188eu/hal/usb_ops_linux.c +7 -3
index 69e64863a5d1..128cdb178abc 100644
@@ -145,12 +145,17 @@ int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 	return RTW_STATUS_CODE(ret);
 }
 
-static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
+int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
 	__le32 data = cpu_to_le32(val & 0x0000ffff);
+	int ret;
 
-	return usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_WRITE);
+
+	return RTW_STATUS_CODE(ret);
 }
 
 static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
@@ -550,7 +555,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
 	pops->_read_port = &usb_read_port;
-	pops->_write16 = &usb_write16;
 	pops->_write32 = &usb_write32;
 	pops->_writeN = &usb_writeN;
 	pops->_write_port = &usb_write_port;
drivers/staging/r8188eu/include/rtw_io.h +1 -3
index 3b229027f094..0cb1f626a549 100644
@@ -253,7 +253,7 @@ void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port_cancel(struct adapter *adapter);
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val);
-int _rtw_write16(struct adapter *adapter, u32 addr, u16 val);
+int rtw_write16(struct adapter *adapter, u32 addr, u16 val);
 int _rtw_write32(struct adapter *adapter, u32 addr, u32 val);
 int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
 
@@ -271,8 +271,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
 
-#define  rtw_write16(adapter, addr, val)				\
-	_rtw_write16((adapter), (addr), (val))
 #define  rtw_write32(adapter, addr, val)				\
 	_rtw_write32((adapter), (addr), (val))
 #define  rtw_writeN(adapter, addr, length, data)			\
Signature · 1 line
2.33.0
#7 lore raw

PATCH v6 7/19 staging: r8188eu: remove the helpers of usb_write32()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_write32() and usb_write32() and embed their code into the caller (i.e., rtw_write32()).

_rtw_write32() is a mere redefinition of rtw_write32() and it is unneeded. usb_write32() was the only functions assigned to the (*_usb_write32) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 15 ---------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 10 +++++++---
 drivers/staging/r8188eu/include/rtw_io.h    |  4 +---
 3 files changed, 8 insertions(+), 21 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -15
index 7547e25d870b..98c9823fe53b 100644
@@ -34,21 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-int _rtw_write32(struct adapter *adapter, u32 addr, u32 val)
-{
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-	int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
-	int ret;
-
-	_write32 = pintfhdl->io_ops._write32;
-
-	ret = _write32(pintfhdl, addr, val);
-
-
-	return RTW_STATUS_CODE(ret);
-}
-
 int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata)
 {
 	struct io_priv *pio_priv = &adapter->iopriv;
drivers/staging/r8188eu/hal/usb_ops_linux.c +7 -3
index 128cdb178abc..73f90b21364e 100644
@@ -158,12 +158,17 @@ int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 	return RTW_STATUS_CODE(ret);
 }
 
-static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
+int rtw_write32(struct adapter *adapter, u32 addr, u32 val)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
 	__le32 data = cpu_to_le32(val);
+	int ret;
 
-	return usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_WRITE);
+
+	return RTW_STATUS_CODE(ret);
 }
 
 static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata)
@@ -555,7 +560,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
 	pops->_read_port = &usb_read_port;
-	pops->_write32 = &usb_write32;
 	pops->_writeN = &usb_writeN;
 	pops->_write_port = &usb_write_port;
 	pops->_read_port_cancel = &usb_read_port_cancel;
drivers/staging/r8188eu/include/rtw_io.h +1 -3
index 0cb1f626a549..83e2ed13b667 100644
@@ -254,7 +254,7 @@ void _rtw_read_port_cancel(struct adapter *adapter);
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val);
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val);
-int _rtw_write32(struct adapter *adapter, u32 addr, u32 val);
+int rtw_write32(struct adapter *adapter, u32 addr, u32 val);
 int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
 
 int _rtw_write8_async(struct adapter *adapter, u32 addr, u8 val);
@@ -271,8 +271,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
 
-#define  rtw_write32(adapter, addr, val)				\
-	_rtw_write32((adapter), (addr), (val))
 #define  rtw_writeN(adapter, addr, length, data)			\
 	_rtw_writeN((adapter), (addr), (length), (data))
 #define rtw_write8_async(adapter, addr, val)				\
Signature · 1 line
2.33.0
#8 lore raw

PATCH v6 8/19 staging: r8188eu: remove the helpers of usb_writeN()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_writeN() and usb_writeN() and embed their code into the caller (i.e., rtw_writeN()).

_rtw_writeN() is a mere redefinition of rtw_writeN() and it is unneeded. usb_writeN() was the only functions assigned to the (*_usb_writeN) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 14 --------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 11 +++++++----
 drivers/staging/r8188eu/include/rtw_io.h    |  4 +---
 3 files changed, 8 insertions(+), 21 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -14
index 98c9823fe53b..b2e41fa48d81 100644
@@ -34,20 +34,6 @@ [email protected]
 #define rtw_cpu_to_le16(val)		cpu_to_le16(val)
 #define rtw_cpu_to_le32(val)		cpu_to_le32(val)
 
-int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata)
-{
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl *pintfhdl = (struct intf_hdl *)(&pio_priv->intf);
-	int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata);
-	int ret;
-
-	_writeN = pintfhdl->io_ops._writeN;
-
-	ret = _writeN(pintfhdl, addr, length, pdata);
-
-
-	return RTW_STATUS_CODE(ret);
-}
 int _rtw_write8_async(struct adapter *adapter, u32 addr, u8 val)
 {
 	struct io_priv *pio_priv = &adapter->iopriv;
drivers/staging/r8188eu/hal/usb_ops_linux.c +7 -4
index 73f90b21364e..90fb46c75159 100644
@@ -171,17 +171,21 @@ int rtw_write32(struct adapter *adapter, u32 addr, u32 val)
 	return RTW_STATUS_CODE(ret);
 }
 
-static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata)
+int rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata)
 {
+	struct io_priv *pio_priv = &adapter->iopriv;
+	struct intf_hdl *pintfhdl = &pio_priv->intf;
 	u16 wvalue = (u16)(addr & 0x0000ffff);
 	u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
+	int ret;
 
 	if (length > VENDOR_CMD_MAX_DATA_LEN)
-		return -EINVAL;
+		return _FAIL;
 
 	memcpy(buf, pdata, length);
+	ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, (length & 0xffff), REALTEK_USB_VENQT_WRITE);
 
-	return usbctrl_vendorreq(pintfhdl, wvalue, buf, (length & 0xffff), REALTEK_USB_VENQT_WRITE);
+	return RTW_STATUS_CODE(ret);
 }
 
 static void interrupt_handler_8188eu(struct adapter *adapt, u16 pkt_len, u8 *pbuf)
@@ -560,7 +564,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
 	pops->_read_port = &usb_read_port;
-	pops->_writeN = &usb_writeN;
 	pops->_write_port = &usb_write_port;
 	pops->_read_port_cancel = &usb_read_port_cancel;
 	pops->_write_port_cancel = &usb_write_port_cancel;
drivers/staging/r8188eu/include/rtw_io.h +1 -3
index 83e2ed13b667..1123017cac65 100644
@@ -255,7 +255,7 @@ void _rtw_read_port_cancel(struct adapter *adapter);
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val);
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val);
 int rtw_write32(struct adapter *adapter, u32 addr, u32 val);
-int _rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
+int rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
 
 int _rtw_write8_async(struct adapter *adapter, u32 addr, u8 val);
 int _rtw_write16_async(struct adapter *adapter, u32 addr, u16 val);
@@ -271,8 +271,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
 
-#define  rtw_writeN(adapter, addr, length, data)			\
-	_rtw_writeN((adapter), (addr), (length), (data))
 #define rtw_write8_async(adapter, addr, val)				\
 	_rtw_write8_async((adapter), (addr), (val))
 #define rtw_write16_async(adapter, addr, val)				\
Signature · 1 line
2.33.0
#9 lore raw

PATCH v6 9/19 staging: r8188eu: remove the helpers of usb_read_port()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_read_port() and usb_read_port() and embed their code into the caller (i.e., rtw_read_port()).

_rtw_read_port() is a mere redefinition of rtw_read_port() and it is unneeded. usb_read_port() was the only functions assigned to the (*_usb_read_port) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c       | 18 ------------------
 drivers/staging/r8188eu/hal/usb_halinit.c   |  6 +-----
 drivers/staging/r8188eu/hal/usb_ops_linux.c |  4 +---
 drivers/staging/r8188eu/include/rtw_io.h    |  4 +---
 4 files changed, 3 insertions(+), 29 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -18
index b2e41fa48d81..ac72f894da75 100644
@@ -75,24 +75,6 @@ int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val)
 	return RTW_STATUS_CODE(ret);
 }
 
-void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
-{
-	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-
-
-
-	if (adapter->bDriverStopped || adapter->bSurpriseRemoved)
-	     return;
-
-	_read_port = pintfhdl->io_ops._read_port;
-
-	_read_port(pintfhdl, addr, cnt, pmem);
-
-
-}
-
 void _rtw_read_port_cancel(struct adapter *adapter)
 {
 	void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
drivers/staging/r8188eu/hal/usb_halinit.c +1 -5
index dfaa0195dbc3..5133d533674f 100644
@@ -1033,11 +1033,7 @@ static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter)
 	u8 i;
 	struct recv_buf *precvbuf;
 	uint	status;
-	struct intf_hdl *pintfhdl = &Adapter->iopriv.intf;
 	struct recv_priv *precvpriv = &Adapter->recvpriv;
-	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
-
-	_read_port = pintfhdl->io_ops._read_port;
 
 	status = _SUCCESS;
 
@@ -1046,7 +1042,7 @@ static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter)
 	/* issue Rx irp to receive data */
 	precvbuf = (struct recv_buf *)precvpriv->precv_buf;
 	for (i = 0; i < NR_RECVBUFF; i++) {
-		if (!_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf)) {
+		if (!rtw_read_port(Adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf)) {
 			status = _FAIL;
 			goto exit;
 		}
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -3
index 90fb46c75159..a104e3fac7d1 100644
@@ -456,11 +456,10 @@ static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
 	}
 }
 
-static u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
+u32 rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *rmem)
 {
 	struct urb *purb = NULL;
 	struct recv_buf	*precvbuf = (struct recv_buf *)rmem;
-	struct adapter		*adapter = pintfhdl->padapter;
 	struct dvobj_priv	*pdvobj = adapter_to_dvobj(adapter);
 	struct recv_priv	*precvpriv = &adapter->recvpriv;
 	struct usb_device	*pusbd = pdvobj->pusbdev;
@@ -563,7 +562,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_read_port = &usb_read_port;
 	pops->_write_port = &usb_write_port;
 	pops->_read_port_cancel = &usb_read_port_cancel;
 	pops->_write_port_cancel = &usb_write_port_cancel;
drivers/staging/r8188eu/include/rtw_io.h +1 -3
index 1123017cac65..600c6e7a375b 100644
@@ -249,7 +249,7 @@ u8 rtw_read8(struct adapter *adapter, u32 addr);
 u16 rtw_read16(struct adapter *adapter, u32 addr);
 u32 rtw_read32(struct adapter *adapter, u32 addr);
 void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
-void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+u32 rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void _rtw_read_port_cancel(struct adapter *adapter);
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val);
@@ -267,8 +267,6 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
 void _rtw_write_port_cancel(struct adapter *adapter);
 
-#define rtw_read_port(adapter, addr, cnt, mem)				\
-	_rtw_read_port((adapter), (addr), (cnt), (mem))
 #define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
 
 #define rtw_write8_async(adapter, addr, val)				\
Signature · 1 line
2.33.0
#10 lore raw

PATCH v6 10/19 staging: r8188eu: remove the helpers of usb_write_port()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_write_port() and usb_write_port() and embed their code into the caller (i.e., rtw_write_port()).

_rtw_write_port() is a mere redefinition of rtw_write_port() and it is unneeded. usb_write_port() was the only functions assigned to the (*_usb_write_port) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c         | 20 +------------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c   |  1 -
 drivers/staging/r8188eu/include/rtw_io.h      |  4 +---
 .../staging/r8188eu/include/usb_ops_linux.h   |  1 -
 .../staging/r8188eu/os_dep/usb_ops_linux.c    |  3 +--
 5 files changed, 3 insertions(+), 26 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +1 -19
index ac72f894da75..3a5e9dbfcb12 100644
@@ -87,24 +87,6 @@ void _rtw_read_port_cancel(struct adapter *adapter)
 		_read_port_cancel(pintfhdl);
 }
 
-u32 _rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
-{
-	u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct	intf_hdl		*pintfhdl = &pio_priv->intf;
-	u32 ret = _SUCCESS;
-
-
-
-	_write_port = pintfhdl->io_ops._write_port;
-
-	ret = _write_port(pintfhdl, addr, cnt, pmem);
-
-
-
-	return ret;
-}
-
 u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem, int timeout_ms)
 {
 	int ret = _SUCCESS;
@@ -114,7 +96,7 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt, u8 *pme
 	rtw_sctx_init(&sctx, timeout_ms);
 	pxmitbuf->sctx = &sctx;
 
-	ret = _rtw_write_port(adapter, addr, cnt, pmem);
+	ret = rtw_write_port(adapter, addr, cnt, pmem);
 
 	if (ret == _SUCCESS)
 		ret = rtw_sctx_wait(&sctx);
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
index a104e3fac7d1..4fea21c0f7af 100644
@@ -562,7 +562,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_write_port = &usb_write_port;
 	pops->_read_port_cancel = &usb_read_port_cancel;
 	pops->_write_port_cancel = &usb_write_port_cancel;
 
drivers/staging/r8188eu/include/rtw_io.h +1 -3
index 600c6e7a375b..f2b1978b6e80 100644
@@ -262,7 +262,7 @@ int _rtw_write16_async(struct adapter *adapter, u32 addr, u16 val);
 int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val);
 
 void _rtw_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
-u32 _rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
+u32 rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
 void _rtw_write_port_cancel(struct adapter *adapter);
@@ -275,8 +275,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_write16_async((adapter), (addr), (val))
 #define rtw_write32_async(adapter, addr, val)				\
 	_rtw_write32_async((adapter), (addr), (val))
-#define rtw_write_port(adapter, addr, cnt, mem)				\
-	_rtw_write_port((adapter), (addr), (cnt), (mem))
 #define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms)	\
 	_rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
 #define rtw_write_port_cancel(adapter) _rtw_write_port_cancel((adapter))
drivers/staging/r8188eu/include/usb_ops_linux.h +0 -1
index 37e0614fd15c..bdc596fe5854 100644
@@ -30,7 +30,6 @@ unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
 
 void usb_read_port_cancel(struct intf_hdl *pintfhdl);
 
-u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
 void usb_write_port_cancel(struct intf_hdl *pintfhdl);
 
 #endif
drivers/staging/r8188eu/os_dep/usb_ops_linux.c +1 -2
index 9afb4df71969..36ef06f88fdd 100644
@@ -124,14 +124,13 @@ static void usb_write_port_complete(struct urb *purb, struct pt_regs *regs)
 
 }
 
-u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
+u32 rtw_write_port(struct adapter *padapter, u32 addr, u32 cnt, u8 *wmem)
 {
 	unsigned long irqL;
 	unsigned int pipe;
 	int status;
 	u32 ret = _FAIL;
 	struct urb *purb = NULL;
-	struct adapter *padapter = (struct adapter *)pintfhdl->padapter;
 	struct dvobj_priv	*pdvobj = adapter_to_dvobj(padapter);
 	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
 	struct xmit_buf *pxmitbuf = (struct xmit_buf *)wmem;
Signature · 1 line
2.33.0
#11 lore raw

PATCH v6 11/19 staging: r8188eu: remove the helpers of usb_read_port_cancel()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_read_port_cancel() and usb_read_port_cancel() and embed their code into the caller (i.e., rtw_read_port_cancel()).

_rtw_read_port_cancel() is a mere redefinition of rtw_read_port_cancel() and it is unneeded. usb_read_port_cancel() was the only functions assigned to the (*_usb_read_port_cancel) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c           | 11 -----------
 drivers/staging/r8188eu/hal/usb_ops_linux.c     |  1 -
 drivers/staging/r8188eu/include/rtw_io.h        |  3 +--
 drivers/staging/r8188eu/include/usb_ops_linux.h |  2 --
 drivers/staging/r8188eu/os_dep/usb_ops_linux.c  |  6 ++----
 5 files changed, 3 insertions(+), 20 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -11
index 3a5e9dbfcb12..a57742057a65 100644
@@ -75,17 +75,6 @@ int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val)
 	return RTW_STATUS_CODE(ret);
 }
 
-void _rtw_read_port_cancel(struct adapter *adapter)
-{
-	void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-
-	_read_port_cancel = pintfhdl->io_ops._read_port_cancel;
-
-	if (_read_port_cancel)
-		_read_port_cancel(pintfhdl);
-}
 
 u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem, int timeout_ms)
 {
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
index 4fea21c0f7af..1865a26142bc 100644
@@ -562,7 +562,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_read_port_cancel = &usb_read_port_cancel;
 	pops->_write_port_cancel = &usb_write_port_cancel;
 
 }
drivers/staging/r8188eu/include/rtw_io.h +1 -2
index f2b1978b6e80..56e17e2a7ee2 100644
@@ -250,7 +250,7 @@ u16 rtw_read16(struct adapter *adapter, u32 addr);
 u32 rtw_read32(struct adapter *adapter, u32 addr);
 void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 u32 rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
-void _rtw_read_port_cancel(struct adapter *adapter);
+void rtw_read_port_cancel(struct adapter *adapter);
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val);
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val);
@@ -267,7 +267,6 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
 void _rtw_write_port_cancel(struct adapter *adapter);
 
-#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
 
 #define rtw_write8_async(adapter, addr, val)				\
 	_rtw_write8_async((adapter), (addr), (val))
drivers/staging/r8188eu/include/usb_ops_linux.h +0 -2
index bdc596fe5854..186c6b7628dc 100644
@@ -28,8 +28,6 @@
 
 unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
 
-void usb_read_port_cancel(struct intf_hdl *pintfhdl);
-
 void usb_write_port_cancel(struct intf_hdl *pintfhdl);
 
 #endif
drivers/staging/r8188eu/os_dep/usb_ops_linux.c +2 -4
index 36ef06f88fdd..a98ffdf92ed4 100644
@@ -31,12 +31,10 @@ struct zero_bulkout_context {
 	void *padapter;
 };
 
-void usb_read_port_cancel(struct intf_hdl *pintfhdl)
+void rtw_read_port_cancel(struct adapter *padapter)
 {
 	int i;
-	struct recv_buf *precvbuf;
-	struct adapter	*padapter = pintfhdl->padapter;
-	precvbuf = (struct recv_buf *)padapter->recvpriv.precv_buf;
+	struct recv_buf *precvbuf = (struct recv_buf *)padapter->recvpriv.precv_buf;
 
 	DBG_88E("%s\n", __func__);
 
Signature · 1 line
2.33.0
#12 lore raw

PATCH v6 12/19 staging: r8188eu: remove the helpers of usb_write_port_cancel()

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Remove the unnecessary _rtw_write_port_cancel() and usb_write_port_cancel() and embed their code into the caller (i.e., rtw_write_port_cancel()).

_rtw_write_port_cancel() is a mere redefinition of rtw_write_port_cancel() and it is unneeded. usb_write_port_cancel() was the only functions assigned to the (*_usb_write_port_cancel) pointer, so we can simply remove it and make a direct call.

This patch is in preparation for the _io_ops structure removal.

---
 drivers/staging/r8188eu/core/rtw_io.c           | 12 ------------
 drivers/staging/r8188eu/hal/usb_ops_linux.c     |  2 --
 drivers/staging/r8188eu/include/rtw_io.h        |  3 +--
 drivers/staging/r8188eu/include/usb_ops_linux.h |  2 --
 drivers/staging/r8188eu/os_dep/usb_ops_linux.c  |  3 +--
 5 files changed, 2 insertions(+), 20 deletions(-)
drivers/staging/r8188eu/core/rtw_io.c +0 -12
index a57742057a65..74b02ff8e44d 100644
@@ -93,18 +93,6 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt, u8 *pme
 	return ret;
 }
 
-void _rtw_write_port_cancel(struct adapter *adapter)
-{
-	void (*_write_port_cancel)(struct intf_hdl *pintfhdl);
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-
-	_write_port_cancel = pintfhdl->io_ops._write_port_cancel;
-
-	if (_write_port_cancel)
-		_write_port_cancel(pintfhdl);
-}
-
 int rtw_init_io_priv(struct adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops))
 {
 	struct io_priv	*piopriv = &padapter->iopriv;
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -2
index 1865a26142bc..2516cfc464a9 100644
@@ -562,8 +562,6 @@ void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
 {
 
 	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-	pops->_write_port_cancel = &usb_write_port_cancel;
-
 }
 
 void rtl8188eu_set_hw_type(struct adapter *adapt)
drivers/staging/r8188eu/include/rtw_io.h +1 -2
index 56e17e2a7ee2..4f4678a55687 100644
@@ -265,7 +265,7 @@ void _rtw_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 u32 rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
 			     u8 *pmem, int timeout_ms);
-void _rtw_write_port_cancel(struct adapter *adapter);
+void rtw_write_port_cancel(struct adapter *adapter);
 
 
 #define rtw_write8_async(adapter, addr, val)				\
@@ -276,7 +276,6 @@ void _rtw_write_port_cancel(struct adapter *adapter);
 	_rtw_write32_async((adapter), (addr), (val))
 #define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms)	\
 	_rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
-#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel((adapter))
 
 /* ioreq */
 void ioreq_read8(struct adapter *adapter, u32 addr, u8 *pval);
drivers/staging/r8188eu/include/usb_ops_linux.h +0 -2
index 186c6b7628dc..641f059ffaf7 100644
@@ -28,6 +28,4 @@
 
 unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
 
-void usb_write_port_cancel(struct intf_hdl *pintfhdl);
-
 #endif
drivers/staging/r8188eu/os_dep/usb_ops_linux.c +1 -2
index a98ffdf92ed4..4085f3e6067d 100644
@@ -211,10 +211,9 @@ u32 rtw_write_port(struct adapter *padapter, u32 addr, u32 cnt, u8 *wmem)
 	return ret;
 }
 
-void usb_write_port_cancel(struct intf_hdl *pintfhdl)
+void rtw_write_port_cancel(struct adapter *padapter)
 {
 	int i, j;
-	struct adapter	*padapter = pintfhdl->padapter;
 	struct xmit_buf *pxmitbuf = (struct xmit_buf *)padapter->xmitpriv.pxmitbuf;
 
 	DBG_88E("%s\n", __func__);
Signature · 1 line
2.33.0
#13 lore raw

PATCH v6 13/19 staging: r8188eu: remove core/rtw_io.c

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

There are only unused functions and macros and one function which can be open-coded.

So, removed core/rtw_io.c at all, removed core/rtw_io.c from Makefile and open-coded rtw_init_io_priv

---
 drivers/staging/r8188eu/Makefile          |   1 -
 drivers/staging/r8188eu/core/rtw_io.c     | 111 ----------------------
 drivers/staging/r8188eu/include/rtw_io.h  |  19 +---
 drivers/staging/r8188eu/os_dep/usb_intf.c |   8 +-
 4 files changed, 8 insertions(+), 131 deletions(-)
 delete mode 100644 drivers/staging/r8188eu/core/rtw_io.c
drivers/staging/r8188eu/Makefile +0 -1
index aebaf29990fd..4ca48fe628fd 100644
@@ -78,7 +78,6 @@ rtk_core :=				\
 		core/rtw_debug.o	\
 		core/rtw_efuse.o	\
 		core/rtw_ieee80211.o	\
-		core/rtw_io.o		\
 		core/rtw_ioctl_set.o	\
 		core/rtw_iol.o		\
 		core/rtw_led.o		\
drivers/staging/r8188eu/core/rtw_io.c deleted +0 -111

111 lines not on this page · raw message

drivers/staging/r8188eu/include/rtw_io.h +1 -18
index 4f4678a55687..2b9b64f1ac80 100644
@@ -257,25 +257,11 @@ int rtw_write16(struct adapter *adapter, u32 addr, u16 val);
 int rtw_write32(struct adapter *adapter, u32 addr, u32 val);
 int rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
 
-int _rtw_write8_async(struct adapter *adapter, u32 addr, u8 val);
-int _rtw_write16_async(struct adapter *adapter, u32 addr, u16 val);
-int _rtw_write32_async(struct adapter *adapter, u32 addr, u32 val);
-
 void _rtw_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 u32 rtw_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
-u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
-			     u8 *pmem, int timeout_ms);
 void rtw_write_port_cancel(struct adapter *adapter);
 
-
-#define rtw_write8_async(adapter, addr, val)				\
-	_rtw_write8_async((adapter), (addr), (val))
-#define rtw_write16_async(adapter, addr, val)				\
-	_rtw_write16_async((adapter), (addr), (val))
-#define rtw_write32_async(adapter, addr, val)				\
-	_rtw_write32_async((adapter), (addr), (val))
-#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms)	\
-	_rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
+void rtw_write_scsi(struct adapter *adapter, u32 cnt, u8 *pmem);
 
 /* ioreq */
 void ioreq_read8(struct adapter *adapter, u32 addr, u8 *pval);
@@ -317,9 +303,6 @@ void async_write32(struct adapter *adapter, u32 addr, u32 val,
 void async_write_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 void async_write_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
 
-int rtw_init_io_priv(struct adapter *padapter,
-		     void (*set_intf_ops)(struct _io_ops *pops));
-
 uint alloc_io_queue(struct adapter *adapter);
 void free_io_queue(struct adapter *adapter);
 void async_bus_io(struct io_queue *pio_q);
drivers/staging/r8188eu/os_dep/usb_intf.c +7 -1
index d04d2f658ce0..306325818a9a 100644
@@ -448,6 +448,8 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	struct adapter *padapter = NULL;
 	struct net_device *pnetdev = NULL;
 	int status = _FAIL;
+	struct io_priv *piopriv;
+	struct intf_hdl *pintf;
 
 	padapter = vzalloc(sizeof(*padapter));
 	if (!padapter)
@@ -479,7 +481,11 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	padapter->intf_stop = &usb_intf_stop;
 
 	/* step init_io_priv */
-	rtw_init_io_priv(padapter, usb_set_intf_ops);
+	piopriv = &padapter->iopriv;
+	pintf = &piopriv->intf;
+	piopriv->padapter = padapter;
+	pintf->padapter = padapter;
+	pintf->pintf_dev = adapter_to_dvobj(padapter);
 
 	/* step read_chip_version */
 	rtl8188e_read_chip_version(padapter);
Signature · 1 line
2.33.0
#14 lore raw

PATCH v6 14/19 staging: remove struct _io_ops

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Finally struct _io_ops is unused, so remove it.

---
 drivers/staging/r8188eu/hal/usb_ops_linux.c |  6 -----
 drivers/staging/r8188eu/include/rtw_io.h    | 25 ---------------------
 drivers/staging/r8188eu/include/usb_ops.h   |  2 --
 3 files changed, 33 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -6
index 2516cfc464a9..117213c9f984 100644
@@ -558,12 +558,6 @@ void rtl8188eu_xmit_tasklet(unsigned long priv)
 	}
 }
 
-void rtl8188eu_set_intf_ops(struct _io_ops	*pops)
-{
-
-	memset((u8 *)pops, 0, sizeof(struct _io_ops));
-}
-
 void rtl8188eu_set_hw_type(struct adapter *adapt)
 {
 	adapt->chip_type = RTL8188E;
drivers/staging/r8188eu/include/rtw_io.h +0 -25
index 2b9b64f1ac80..c6a078210eeb 100644
@@ -84,30 +84,6 @@ struct intf_priv;
 struct intf_hdl;
 struct io_queue;
 
-struct _io_ops {
-	u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr);
-	u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
-	u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr);
-	int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
-	int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
-	int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
-	int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr, u32 length,
-		       u8 *pdata);
-	int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
-	int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
-	int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
-	void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
-			  u8 *pmem);
-	void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
-			   u8 *pmem);
-	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
-			  u8 *pmem);
-	u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt,
-			   u8 *pmem);
-	void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
-	void (*_write_port_cancel)(struct intf_hdl *pintfhdl);
-};
-
 struct io_req {
 	struct list_head list;
 	u32	addr;
@@ -125,7 +101,6 @@ struct io_req {
 struct	intf_hdl {
 	struct adapter *padapter;
 	struct dvobj_priv *pintf_dev;
-	struct _io_ops	io_ops;
 };
 
 struct reg_protocol_rd {
drivers/staging/r8188eu/include/usb_ops.h +0 -2
index c53cc54b6b87..1939b781b097 100644
@@ -21,8 +21,6 @@
 
 void rtl8188eu_set_hw_type(struct adapter *padapter);
 #define hal_set_hw_type rtl8188eu_set_hw_type
-void rtl8188eu_set_intf_ops(struct _io_ops *pops);
-#define usb_set_intf_ops rtl8188eu_set_intf_ops
 
 /*
  * Increase and check if the continual_urb_error of this @param dvobjprivei
Signature · 1 line
2.33.0
#16 lore raw

Re: [PATCH v6 14/19] staging: remove struct _io_ops

Quoted 7 lines · CEST Dan Carpenter

Patches 1-14 are great. Those 14 patches are:

regards,
dan carpenter

Dear Dan,

Thank you very much for your "Reviewed-by:" tag. We really appreciated it. And thanks for the suggestions you gave about the other 5 patches. v7 will be made according to them.

As far as it regards to 1-14, I want to point out that the bulk of the work was done by Pavel (all the coding). Of course we discussed the general design of the 19 patches together, but for the first 14 I just wrote the commit messages and subjects and obviously I also reviewed and tested them.

Regards,

Fabio

#17 lore raw

Re: [PATCH v6 14/19] staging: remove struct _io_ops

In reply to Fabio M. De Francesco
Quoted 4 lines · Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

Finally struct _io_ops is unused, so remove it.

Quoted 8 lines
---
 drivers/staging/r8188eu/hal/usb_ops_linux.c |  6 -----
 drivers/staging/r8188eu/include/rtw_io.h    | 25 ---------------------
 drivers/staging/r8188eu/include/usb_ops.h   |  2 --
 3 files changed, 33 deletions(-)

Subject line is missing the driver name :(

#18 lore raw

PATCH v6 15/19 staging: r8188eu: Clean up usbctrl_vendorreq()

In reply to Fabio M. De Francesco

Clean up usbctrl_vendoreq() in usb_ops_linux.c.

---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 60 +++++++++------------
 1 file changed, 26 insertions(+), 34 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +26 -34
index 117213c9f984..2098ce935dc0 100644
@@ -8,15 +8,15 @@
 #include "../include/recv_osdep.h"
 #include "../include/rtl8188e_hal.h"
 
-static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata, u16 len, u8 requesttype)
+static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u16 len, u8 requesttype)
 {
-	struct adapter	*adapt = pintfhdl->padapter;
-	struct dvobj_priv  *dvobjpriv = adapter_to_dvobj(adapt);
+	struct adapter *adapt = intfhdl->padapter;
+	struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
 	struct usb_device *udev = dvobjpriv->pusbdev;
+	int vendorreq_times = 0;
 	unsigned int pipe;
 	int status = 0;
-	u8 *pIo_buf;
-	int vendorreq_times = 0;
+	u8 *io_buf;
 
 	if ((adapt->bSurpriseRemoved) || (adapt->pwrctrlpriv.pnp_bstop_trx)) {
 		status = -EPERM;
@@ -32,51 +32,44 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 	mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
 
 	/*  Acquire IO memory for vendorreq */
-	pIo_buf = dvobjpriv->usb_vendor_req_buf;
-
-	if (!pIo_buf) {
-		DBG_88E("[%s] pIo_buf == NULL\n", __func__);
-		status = -ENOMEM;
-		goto release_mutex;
-	}
+	io_buf = dvobjpriv->usb_vendor_req_buf;
 
 	if (requesttype == REALTEK_USB_VENQT_READ)
-		pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
+		/* read in */
+		pipe = usb_rcvctrlpipe(udev, 0);
 	else
-		pipe = usb_sndctrlpipe(udev, 0);/* write_out */
+		/* write out */
+		pipe = usb_sndctrlpipe(udev, 0);
 
 	while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
 		if (requesttype == REALTEK_USB_VENQT_READ)
-			memset(pIo_buf, 0, len);
+			memset(io_buf, 0, len);
 		else
-			memcpy(pIo_buf, pdata, len);
+			memcpy(io_buf, data, len);
 
 		status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
 					 requesttype, value, REALTEK_USB_VENQT_CMD_IDX,
-					 pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
+					 io_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
 
-		if (status == len) {   /*  Success this control transfer. */
+		if (status == len) {
+			/*  success */
 			rtw_reset_continual_urb_error(dvobjpriv);
 			if (requesttype == REALTEK_USB_VENQT_READ)
-				memcpy(pdata, pIo_buf,  len);
-		} else { /*  error cases */
-			DBG_88E("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n",
-				value, (requesttype == REALTEK_USB_VENQT_READ) ? "read" : "write",
-				len, status, *(u32 *)pdata, vendorreq_times);
-
+				memcpy(data, io_buf,  len);
+		} else {
+			/* errors */
 			if (status < 0) {
-				if (status == (-ESHUTDOWN) || status == -ENODEV) {
+				if (status == -ESHUTDOWN || status == -ENODEV) {
 					adapt->bSurpriseRemoved = true;
 				} else {
-					struct hal_data_8188e	*haldata = GET_HAL_DATA(adapt);
+					struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
 					haldata->srestpriv.wifi_error_status = USB_VEN_REQ_CMD_FAIL;
 				}
-			} else { /*  status != len && status >= 0 */
+			} else {
+				/*  status != len && status >= 0 */
 				if (status > 0) {
-					if (requesttype == REALTEK_USB_VENQT_READ) {
-						/*  For Control read transfer, we have to copy the read data from pIo_buf to pdata. */
-						memcpy(pdata, pIo_buf,  len);
-					}
+					if (requesttype == REALTEK_USB_VENQT_READ)
+						memcpy(data, io_buf,  len);
 				}
 			}
 
@@ -86,12 +79,11 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
 			}
 
 		}
-
-		/*  firmware download is checksumed, don't retry */
+		/*  firmware download is checksummed, don't retry */
 		if ((value >= FW_8188E_START_ADDRESS && value <= FW_8188E_END_ADDRESS) || status == len)
 			break;
 	}
-release_mutex:
+
 	mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
 exit:
 	return status;
Signature · 1 line
2.33.0
#19 lore raw

PATCH v6 16/19 staging: r8188eu: Clean up rtw_read*() and rtw_write*()

In reply to Fabio M. De Francesco

Clean up rtw_read{8,16,32}() and rtw_write{8,16,32,N}() in usb_ops_linux.c.

---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 68 ++++++++++-----------
 1 file changed, 34 insertions(+), 34 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +34 -34
index 2098ce935dc0..d87da84eca07 100644
@@ -91,91 +91,91 @@ static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1
 
 u8 rtw_read8(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	u8 data;
-
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 1, REALTEK_USB_VENQT_READ);
+	usbctrl_vendorreq(intfhdl, address, &data, 1, REALTEK_USB_VENQT_READ);
 
 	return data;
 }
 
 u16 rtw_read16(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data;
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
+	__le16 data;
 
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_READ);
+	usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_READ);
 
-	return (u16)(le32_to_cpu(data) & 0xffff);
+	return le16_to_cpu(data);
 }
 
 u32 rtw_read32(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	__le32 data;
 
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_READ);
+	usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_READ);
 
 	return le32_to_cpu(data);
 }
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(intfhdl, address, &val, 1, REALTEK_USB_VENQT_WRITE);
 
 	return RTW_STATUS_CODE(ret);
 }
 
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data = cpu_to_le32(val & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	__le16 data = cpu_to_le16(val);
+	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_WRITE);
 
 	return RTW_STATUS_CODE(ret);
 }
 
 int rtw_write32(struct adapter *adapter, u32 addr, u32 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
 	__le32 data = cpu_to_le32(val);
+	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_WRITE);
 
 	return RTW_STATUS_CODE(ret);
 }
 
-int rtw_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata)
+int rtw_writeN(struct adapter *adapter, u32 addr, u32 len, u8 *data)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
 	u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
+	u16 address = addr & 0xffff;
+	u16 length = len & 0xffff;
 	int ret;
 
 	if (length > VENDOR_CMD_MAX_DATA_LEN)
 		return _FAIL;
 
-	memcpy(buf, pdata, length);
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, (length & 0xffff), REALTEK_USB_VENQT_WRITE);
+	memcpy(buf, data, length);
+	ret = usbctrl_vendorreq(intfhdl, address, buf, length, REALTEK_USB_VENQT_WRITE);
 
 	return RTW_STATUS_CODE(ret);
 }
Signature · 1 line
2.33.0
#20 lore raw

Re: [PATCH v6 16/19] staging: r8188eu: Clean up rtw_read*() and rtw_write*()

Quoted 2 lines · Fabio M. De Francesco

Clean up rtw_read{8,16,32}() and rtw_write{8,16,32,N}() in usb_ops_linux.c.

It would be good to know what you did more specifically.

1) Rename variables:
pio_priv => io_priv
pintfhdl => intfhdl
wvalue => address.
2) Remove unnecessary casts.
3) Fix types. Use __le16 instead of __le32.

The last one is a small KASan bug fix. So good job on that.

Quoted 13 lines
---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 68 ++++++++++-----------
 1 file changed, 34 insertions(+), 34 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0
index 2098ce935dc0..d87da84eca07 100644
@@ -91,91 +91,91 @@ static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1
 

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 98

Quoted 10 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -4
 u8 rtw_read8(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	u8 data;
-

Deleting this line introduces a checkpatch warning.

Quoted 12 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -5
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 1, REALTEK_USB_VENQT_READ);
+	usbctrl_vendorreq(intfhdl, address, &data, 1, REALTEK_USB_VENQT_READ);
 
 	return data;
 }
 
 u16 rtw_read16(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data;

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 112

Quoted 10 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +6 -2
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
+	__le16 data;
 
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_READ);
+	usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_READ);
 
-	return (u16)(le32_to_cpu(data) & 0xffff);
+	return le16_to_cpu(data);

The last two bytes of "data" are not initialized. I do not think that will cause a bug on either endian type of system during runtime but I this that KASan will catch it and complain.

Quoted 33 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +8 -8
 }
 
 u32 rtw_read32(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	__le32 data;
 
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, REALTEK_USB_VENQT_READ);
+	usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_READ);
 
 	return le32_to_cpu(data);
 }
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(intfhdl, address, &val, 1, REALTEK_USB_VENQT_WRITE);
 
 	return RTW_STATUS_CODE(ret);
 }

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 143

Quoted 10 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -4
 
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data = cpu_to_le32(val & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	__le16 data = cpu_to_le16(val);

This is the other interesting change. I think the original code works though.

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 150

Quoted 8 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +2 -1
+	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, REALTEK_USB_VENQT_WRITE);
+	ret = usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_WRITE);
 
 	return RTW_STATUS_CODE(ret);
 }

regards,
dan carpenter

#21 lore raw

Re: [PATCH v6 16/19] staging: r8188eu: Clean up rtw_read*() and rtw_write*()

Quoted 2 lines · CEST Dan Carpenter
Quoted 1 line · Fabio M. De Francesco

Clean up rtw_read{8,16,32}() and rtw_write{8,16,32,N}() in

usb_ops_linux.c.

Quoted 10 lines
Quoted 1 line

It would be good to know what you did more specifically.

1) Rename variables:
pio_priv => io_priv
pintfhdl => intfhdl
wvalue => address.
2) Remove unnecessary casts.
3) Fix types. Use __le16 instead of __le32.

Dear Dan,

I'm sorry for missing that. :(

Now I remember that you asked for this specifications at least once (if not twice). I'll redo the commit message and add the list above in v7. I guess that I have to do the same in 15/19.

Quoted 1 line

The last one is a small KASan bug fix. So good job on that.

Thanks (even if I don't yet know anything about KASan).

Quoted 8 lines

drivers/

Quoted 8 lines
---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 68 ++++++++++-----------
 1 file changed, 34 insertions(+), 34 deletions(-)
drivers/ renamed from drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0

staging/r8188eu/hal/usb_ops_linux.c

Quoted 4 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl

Quoted 4 lines

index 2098ce935dc0..d87da84eca07 100644

drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0
@@ -91,91 +91,91 @@ static int usbctrl_vendorreq(struct intf_hdl 

*intfhdl, u16 value, void *data, u1

Quoted 13 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 98

Quoted 11 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -4
 u8 rtw_read8(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	u8 data;
-

Deleting this line introduces a checkpatch warning.

I didn't notice the warning. This too will be fixed in v7.

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 98

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 1, 

REALTEK_USB_VENQT_READ);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 97

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	usbctrl_vendorreq(intfhdl, address, &data, 1, 

REALTEK_USB_VENQT_READ);

Quoted 15 lines
Quoted 15 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +4 -4
 	return data;
 }
 
 u16 rtw_read16(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data;
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
+	__le16 data;
 
Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 109

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, 

REALTEK_USB_VENQT_READ);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 108

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	usbctrl_vendorreq(intfhdl, address, &data, 2, 

REALTEK_USB_VENQT_READ);

Quoted 7 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 112

Quoted 3 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -1
-	return (u16)(le32_to_cpu(data) & 0xffff);
+	return le16_to_cpu(data);

The last two bytes of "data" are not initialized. I do not think that will cause a bug on either endian type of system during runtime but I this that KASan will catch it and complain.

I don't want to add mistakes on mistakes. I guess that you are talking of the same fix you wrote above and that "return le16_to_cpu(data);" is correct. Am I interpreting your words in the correct way?

Quoted 12 lines
Quoted 12 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -3
 }
 
 u32 rtw_read32(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	__le32 data;
 
Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 120

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, 

REALTEK_USB_VENQT_READ);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 119

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	usbctrl_vendorreq(intfhdl, address, &data, 4, 

REALTEK_USB_VENQT_READ);

Quoted 14 lines
Quoted 14 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -3
 	return le32_to_cpu(data);
 }
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	int ret;
 
Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 131

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, 

REALTEK_USB_VENQT_WRITE);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 130

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	ret = usbctrl_vendorreq(intfhdl, address, &val, 1, 

REALTEK_USB_VENQT_WRITE);

Quoted 4 lines
Quoted 4 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0
 	return RTW_STATUS_CODE(ret);
 }
 
Quoted 12 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 143

Quoted 9 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -4
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data = cpu_to_le32(val & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	__le16 data = cpu_to_le16(val);

This is the other interesting change. I think the original code works though.

Here too, I'm a bit confused... Do yo prefer the original code or you're saying that, although the original code works fine, I made the correct choice in changing it? Can you please confirm?

Quoted 5 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1

Quoted 5 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -1
+	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, 

REALTEK_USB_VENQT_WRITE);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 142

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	ret = usbctrl_vendorreq(intfhdl, address, &data, 2, 

REALTEK_USB_VENQT_WRITE);

Quoted 8 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 144

Quoted 3 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0
 	return RTW_STATUS_CODE(ret);
 }

regards,
dan carpenter

Regards,

Fabio

#22 lore raw

Re: [PATCH v6 16/19] staging: r8188eu: Clean up rtw_read*() and rtw_write*()

Quoted 88 lines · Fabio M. De Francesco
Quoted 2 lines · CEST Dan Carpenter
Quoted 1 line · Fabio M. De Francesco

Clean up rtw_read{8,16,32}() and rtw_write{8,16,32,N}() in

usb_ops_linux.c.

Quoted 10 lines
Quoted 1 line

It would be good to know what you did more specifically.

1) Rename variables:
pio_priv => io_priv
pintfhdl => intfhdl
wvalue => address.
2) Remove unnecessary casts.
3) Fix types. Use __le16 instead of __le32.

Dear Dan,

I'm sorry for missing that. :(

Now I remember that you asked for this specifications at least once (if not twice). I'll redo the commit message and add the list above in v7. I guess that I have to do the same in 15/19.

Quoted 1 line

The last one is a small KASan bug fix. So good job on that.

Thanks (even if I don't yet know anything about KASan).

Quoted 8 lines

drivers/

Quoted 8 lines
---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 68 ++++++++++-----------
 1 file changed, 34 insertions(+), 34 deletions(-)
drivers/ renamed from drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0

staging/r8188eu/hal/usb_ops_linux.c

Quoted 4 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl

Quoted 4 lines

index 2098ce935dc0..d87da84eca07 100644

drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0
@@ -91,91 +91,91 @@ static int usbctrl_vendorreq(struct intf_hdl 

*intfhdl, u16 value, void *data, u1

Quoted 13 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 98

Quoted 11 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -4
 u8 rtw_read8(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	u8 data;
-

Deleting this line introduces a checkpatch warning.

I didn't notice the warning. This too will be fixed in v7.

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 98

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 1, 

REALTEK_USB_VENQT_READ);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 97

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	usbctrl_vendorreq(intfhdl, address, &data, 1, 

REALTEK_USB_VENQT_READ);

Quoted 15 lines
Quoted 15 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +4 -4
 	return data;
 }
 
 u16 rtw_read16(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data;
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
+	__le16 data;
 
Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 109

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 2, 

REALTEK_USB_VENQT_READ);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 108

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	usbctrl_vendorreq(intfhdl, address, &data, 2, 

REALTEK_USB_VENQT_READ);

Quoted 7 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 112

Quoted 3 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -1
-	return (u16)(le32_to_cpu(data) & 0xffff);
+	return le16_to_cpu(data);

The last two bytes of "data" are not initialized. I do not think that will cause a bug on either endian type of system during runtime but I this that KASan will catch it and complain.

Quoted 4 lines

I don't want to add mistakes on mistakes. I guess that you are talking of the same fix you wrote above and that "return le16_to_cpu(data);" is correct. Am I interpreting your words in the correct way?

In the original code the last two bytes of "data" were uninitialized. KASan will spot this as a bug, but it doesn't affect runtime because we mask away those bytes anyway.

Quoted 51 lines
Quoted 12 lines
Quoted 12 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -3
 }
 
 u32 rtw_read32(struct adapter *adapter, u32 addr)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	__le32 data;
 
Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 120

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	usbctrl_vendorreq(pintfhdl, wvalue, &data, 4, 

REALTEK_USB_VENQT_READ);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 119

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	usbctrl_vendorreq(intfhdl, address, &data, 4, 

REALTEK_USB_VENQT_READ);

Quoted 14 lines
Quoted 14 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -3
 	return le32_to_cpu(data);
 }
 
 int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	u16 address = addr & 0xffff;
 	int ret;
 
Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 131

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -1
-	ret = usbctrl_vendorreq(pintfhdl, wvalue, &val, 1, 

REALTEK_USB_VENQT_WRITE);

Quoted 1 line

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl · line 130

Quoted 1 line
drivers/staging/r8188eu/hal/usb_ops_linux.c +1 -0
+	ret = usbctrl_vendorreq(intfhdl, address, &val, 1, 

REALTEK_USB_VENQT_WRITE);

Quoted 4 lines
Quoted 4 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +0 -0
 	return RTW_STATUS_CODE(ret);
 }
 
Quoted 12 lines

drivers/staging/r8188eu/hal/usb_ops_linux.c static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1 · line 143

Quoted 9 lines
drivers/staging/r8188eu/hal/usb_ops_linux.c +3 -4
 int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 {
-	struct io_priv *pio_priv = &adapter->iopriv;
-	struct intf_hdl *pintfhdl = &pio_priv->intf;
-	u16 wvalue = (u16)(addr & 0x0000ffff);
-	__le32 data = cpu_to_le32(val & 0x0000ffff);
+	struct io_priv *io_priv = &adapter->iopriv;
+	struct intf_hdl *intfhdl = &io_priv->intf;
+	__le16 data = cpu_to_le16(val);

This is the other interesting change. I think the original code works though.

Quoted 4 lines

Here too, I'm a bit confused... Do yo prefer the original code or you're saying that, although the original code works fine, I made the correct choice in changing it? Can you please confirm?

Yeah. The original code was buggy but it still worked fine. Ideally this kind of logic fix would be in a separate patch from the other "rename a variable" changes.

regards,
dan carpenter

#23 lore raw

PATCH v6 17/19 staging: r8188eu: Shorten calls chains of rtw_read*()

In reply to Fabio M. De Francesco

Shorten the calls chains of rtw_read8/16/32() down to the actual reads. For this purpose unify the three usb_read8/16/32() into the new usb_read(); make the latter parameterizable with 'size'; embed most of the code of usbctrl_vendorreq() into usb_read() and use in it the new usb_control_msg_recv() API of USB Core.

---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 60 +++++++++++++++++++--
 1 file changed, 57 insertions(+), 3 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +57 -3
index d87da84eca07..ef35358cf2d3 100644
@@ -89,13 +89,67 @@ static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u1
 	return status;
 }
 
+static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
+{
+	struct adapter *adapt = intfhdl->padapter;
+	struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
+	struct usb_device *udev = dvobjpriv->pusbdev;
+	int status;
+	u8 *io_buf; /* Pointer to I/O buffer */
+
+	if (adapt->bSurpriseRemoved || adapt->pwrctrlpriv.pnp_bstop_trx)
+		return -EPERM;
+
+	mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
+
+	io_buf = dvobjpriv->usb_vendor_req_buf;
+
+	status = usb_control_msg_recv(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
+				      REALTEK_USB_VENQT_READ, addr,
+				      REALTEK_USB_VENQT_CMD_IDX, io_buf,
+				      size, RTW_USB_CONTROL_MSG_TIMEOUT,
+				      GFP_KERNEL);
+
+	if (status == -ESHUTDOWN ||
+	    status == -ENODEV ||
+	    status == -ENOENT) {
+		/*
+		 * device or controller has been disabled due to
+		 * some problem that could not be worked around,
+		 * device or bus doesn’t exist, endpoint does not
+		 * exist or is not enabled.
+		 */
+		adapt->bSurpriseRemoved = true;
+		goto mutex_unlock;
+	}
+
+	if (status < 0) {
+		GET_HAL_DATA(adapt)->srestpriv.wifi_error_status =
+			USB_VEN_REQ_CMD_FAIL;
+
+		if (rtw_inc_and_chk_continual_urb_error(dvobjpriv))
+			adapt->bSurpriseRemoved = true;
+
+		goto mutex_unlock;
+	}
+
+	rtw_reset_continual_urb_error(dvobjpriv);
+	memcpy(data, io_buf, size);
+
+mutex_unlock:
+	mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
+
+	return status;
+}
+
 u8 rtw_read8(struct adapter *adapter, u32 addr)
 {
 	struct io_priv *io_priv = &adapter->iopriv;
 	struct intf_hdl *intfhdl = &io_priv->intf;
 	u16 address = addr & 0xffff;
 	u8 data;
-	usbctrl_vendorreq(intfhdl, address, &data, 1, REALTEK_USB_VENQT_READ);
+
+	usb_read(intfhdl, address, &data, 1);
 
 	return data;
 }
@@ -107,7 +161,7 @@ u16 rtw_read16(struct adapter *adapter, u32 addr)
 	u16 address = addr & 0xffff;
 	__le16 data;
 
-	usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_READ);
+	usb_read(intfhdl, address, &data, 2);
 
 	return le16_to_cpu(data);
 }
@@ -119,7 +173,7 @@ u32 rtw_read32(struct adapter *adapter, u32 addr)
 	u16 address = addr & 0xffff;
 	__le32 data;
 
-	usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_READ);
+	usb_read(intfhdl, address, &data, 4);
 
 	return le32_to_cpu(data);
 }
Signature · 1 line
2.33.0
#24 lore raw

PATCH v6 18/19 staging: r8188eu: Shorten calls chains of rtw_write*()

In reply to Fabio M. De Francesco

Shorten the calls chains of rtw_write8/16/32() down to the actual writes. For this purpose unify the four usb_write8/16/32/N() into the new usb_write(); make the latter parameterizable with 'size'; embed most of the code of usbctrl_vendorreq() into usb_write() and use in it the new usb_control_msg_send() API of USB Core.

---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 112 +++++++-------------
 1 file changed, 41 insertions(+), 71 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +41 -71
index ef35358cf2d3..656f3a774e48 100644
@@ -8,88 +8,60 @@
 #include "../include/recv_osdep.h"
 #include "../include/rtl8188e_hal.h"
 
-static int usbctrl_vendorreq(struct intf_hdl *intfhdl, u16 value, void *data, u16 len, u8 requesttype)
+static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 {
 	struct adapter *adapt = intfhdl->padapter;
 	struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
 	struct usb_device *udev = dvobjpriv->pusbdev;
-	int vendorreq_times = 0;
-	unsigned int pipe;
-	int status = 0;
-	u8 *io_buf;
-
-	if ((adapt->bSurpriseRemoved) || (adapt->pwrctrlpriv.pnp_bstop_trx)) {
-		status = -EPERM;
-		goto exit;
-	}
+	int status;
+	u8 *io_buf; /* Pointer to I/O buffer */
 
-	if (len > MAX_VENDOR_REQ_CMD_SIZE) {
-		DBG_88E("[%s] Buffer len error ,vendor request failed\n", __func__);
-		status = -EINVAL;
-		goto exit;
-	}
+	if (adapt->bSurpriseRemoved || adapt->pwrctrlpriv.pnp_bstop_trx)
+		return -EPERM;
 
 	mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
 
-	/*  Acquire IO memory for vendorreq */
 	io_buf = dvobjpriv->usb_vendor_req_buf;
 
-	if (requesttype == REALTEK_USB_VENQT_READ)
-		/* read in */
-		pipe = usb_rcvctrlpipe(udev, 0);
-	else
-		/* write out */
-		pipe = usb_sndctrlpipe(udev, 0);
-
-	while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
-		if (requesttype == REALTEK_USB_VENQT_READ)
-			memset(io_buf, 0, len);
-		else
-			memcpy(io_buf, data, len);
+	status = usb_control_msg_recv(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
+				      REALTEK_USB_VENQT_READ, addr,
+				      REALTEK_USB_VENQT_CMD_IDX, io_buf,
+				      size, RTW_USB_CONTROL_MSG_TIMEOUT,
+				      GFP_KERNEL);
 
-		status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
-					 requesttype, value, REALTEK_USB_VENQT_CMD_IDX,
-					 io_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
+	if (status == -ESHUTDOWN ||
+	    status == -ENODEV ||
+	    status == -ENOENT) {
+		/*
+		 * device or controller has been disabled due to
+		 * some problem that could not be worked around,
+		 * device or bus doesn’t exist, endpoint does not
+		 * exist or is not enabled.
+		 */
+		adapt->bSurpriseRemoved = true;
+		goto mutex_unlock;
+	}
 
-		if (status == len) {
-			/*  success */
-			rtw_reset_continual_urb_error(dvobjpriv);
-			if (requesttype == REALTEK_USB_VENQT_READ)
-				memcpy(data, io_buf,  len);
-		} else {
-			/* errors */
-			if (status < 0) {
-				if (status == -ESHUTDOWN || status == -ENODEV) {
-					adapt->bSurpriseRemoved = true;
-				} else {
-					struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
-					haldata->srestpriv.wifi_error_status = USB_VEN_REQ_CMD_FAIL;
-				}
-			} else {
-				/*  status != len && status >= 0 */
-				if (status > 0) {
-					if (requesttype == REALTEK_USB_VENQT_READ)
-						memcpy(data, io_buf,  len);
-				}
-			}
+	if (status < 0) {
+		GET_HAL_DATA(adapt)->srestpriv.wifi_error_status =
+			USB_VEN_REQ_CMD_FAIL;
 
-			if (rtw_inc_and_chk_continual_urb_error(dvobjpriv)) {
-				adapt->bSurpriseRemoved = true;
-				break;
-			}
+		if (rtw_inc_and_chk_continual_urb_error(dvobjpriv))
+			adapt->bSurpriseRemoved = true;
 
-		}
-		/*  firmware download is checksummed, don't retry */
-		if ((value >= FW_8188E_START_ADDRESS && value <= FW_8188E_END_ADDRESS) || status == len)
-			break;
+		goto mutex_unlock;
 	}
 
+	rtw_reset_continual_urb_error(dvobjpriv);
+	memcpy(data, io_buf, size);
+
+mutex_unlock:
 	mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
-exit:
+
 	return status;
 }
 
-static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
+static int usb_write(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 {
 	struct adapter *adapt = intfhdl->padapter;
 	struct dvobj_priv *dvobjpriv = adapter_to_dvobj(adapt);
@@ -103,9 +75,10 @@ static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 	mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
 
 	io_buf = dvobjpriv->usb_vendor_req_buf;
+	memcpy(io_buf, data, size);
 
-	status = usb_control_msg_recv(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
-				      REALTEK_USB_VENQT_READ, addr,
+	status = usb_control_msg_send(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
+				      REALTEK_USB_VENQT_WRITE, addr,
 				      REALTEK_USB_VENQT_CMD_IDX, io_buf,
 				      size, RTW_USB_CONTROL_MSG_TIMEOUT,
 				      GFP_KERNEL);
@@ -134,7 +107,6 @@ static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 	}
 
 	rtw_reset_continual_urb_error(dvobjpriv);
-	memcpy(data, io_buf, size);
 
 mutex_unlock:
 	mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
@@ -185,7 +157,7 @@ int rtw_write8(struct adapter *adapter, u32 addr, u8 val)
 	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(intfhdl, address, &val, 1, REALTEK_USB_VENQT_WRITE);
+	ret = usb_write(intfhdl, address, &val, 1);
 
 	return RTW_STATUS_CODE(ret);
 }
@@ -198,7 +170,7 @@ int rtw_write16(struct adapter *adapter, u32 addr, u16 val)
 	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(intfhdl, address, &data, 2, REALTEK_USB_VENQT_WRITE);
+	ret = usb_write(intfhdl, address, &data, 2);
 
 	return RTW_STATUS_CODE(ret);
 }
@@ -211,7 +183,7 @@ int rtw_write32(struct adapter *adapter, u32 addr, u32 val)
 	u16 address = addr & 0xffff;
 	int ret;
 
-	ret = usbctrl_vendorreq(intfhdl, address, &data, 4, REALTEK_USB_VENQT_WRITE);
+	ret = usb_write(intfhdl, address, &data, 4);
 
 	return RTW_STATUS_CODE(ret);
 }
@@ -220,7 +192,6 @@ int rtw_writeN(struct adapter *adapter, u32 addr, u32 len, u8 *data)
 {
 	struct io_priv *io_priv = &adapter->iopriv;
 	struct intf_hdl *intfhdl = &io_priv->intf;
-	u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
 	u16 address = addr & 0xffff;
 	u16 length = len & 0xffff;
 	int ret;
@@ -228,8 +199,7 @@ int rtw_writeN(struct adapter *adapter, u32 addr, u32 len, u8 *data)
 	if (length > VENDOR_CMD_MAX_DATA_LEN)
 		return _FAIL;
 
-	memcpy(buf, data, length);
-	ret = usbctrl_vendorreq(intfhdl, address, buf, length, REALTEK_USB_VENQT_WRITE);
+	ret = usb_write(intfhdl, address, data, length);
 
 	return RTW_STATUS_CODE(ret);
 }
Signature · 1 line
2.33.0
#25 lore raw

PATCH v6 19/19 staging: r8188eu: remove shared buffer for USB requests

In reply to Fabio M. De Francesco

From: Pavel Skripkin <[email protected]>

This driver used shared buffer for usb requests. It led to using mutexes, i.e no usb requests can be done in parallel.

USB requests can be fired in parallel since USB Core allows it. In order to allow them, remove usb_vendor_req_buf from dvobj_priv (since USB I/O is the only user of it) and remove also usb_vendor_req_mutex (since there is nothing to protect).

---
 drivers/staging/r8188eu/hal/usb_ops_linux.c | 29 ++++++++++-----------
 drivers/staging/r8188eu/include/drv_types.h |  5 ----
 drivers/staging/r8188eu/os_dep/usb_intf.c   | 29 +--------------------
 3 files changed, 15 insertions(+), 48 deletions(-)
drivers/staging/r8188eu/hal/usb_ops_linux.c +14 -15
index 656f3a774e48..0ed4e6c8b1f5 100644
@@ -19,9 +19,9 @@ static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 	if (adapt->bSurpriseRemoved || adapt->pwrctrlpriv.pnp_bstop_trx)
 		return -EPERM;
 
-	mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
-
-	io_buf = dvobjpriv->usb_vendor_req_buf;
+	io_buf = kmalloc(size, GFP_KERNEL);
+	if (!io_buf)
+		return -ENOMEM;
 
 	status = usb_control_msg_recv(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
 				      REALTEK_USB_VENQT_READ, addr,
@@ -39,7 +39,7 @@ static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 		 * exist or is not enabled.
 		 */
 		adapt->bSurpriseRemoved = true;
-		goto mutex_unlock;
+		goto end;
 	}
 
 	if (status < 0) {
@@ -49,15 +49,14 @@ static int usb_read(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 		if (rtw_inc_and_chk_continual_urb_error(dvobjpriv))
 			adapt->bSurpriseRemoved = true;
 
-		goto mutex_unlock;
+		goto end;
 	}
 
 	rtw_reset_continual_urb_error(dvobjpriv);
 	memcpy(data, io_buf, size);
 
-mutex_unlock:
-	mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
-
+end:
+	kfree(io_buf);
 	return status;
 }
 
@@ -72,9 +71,10 @@ static int usb_write(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 	if (adapt->bSurpriseRemoved || adapt->pwrctrlpriv.pnp_bstop_trx)
 		return -EPERM;
 
-	mutex_lock(&dvobjpriv->usb_vendor_req_mutex);
+	io_buf = kmalloc(size, GFP_KERNEL);
+	if (!io_buf)
+		return -ENOMEM;
 
-	io_buf = dvobjpriv->usb_vendor_req_buf;
 	memcpy(io_buf, data, size);
 
 	status = usb_control_msg_send(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
@@ -93,7 +93,7 @@ static int usb_write(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 		 * exist or is not enabled.
 		 */
 		adapt->bSurpriseRemoved = true;
-		goto mutex_unlock;
+		goto end;
 	}
 
 	if (status < 0) {
@@ -103,14 +103,13 @@ static int usb_write(struct intf_hdl *intfhdl, u16 addr, void *data, u8 size)
 		if (rtw_inc_and_chk_continual_urb_error(dvobjpriv))
 			adapt->bSurpriseRemoved = true;
 
-		goto mutex_unlock;
+		goto end;
 	}
 
 	rtw_reset_continual_urb_error(dvobjpriv);
 
-mutex_unlock:
-	mutex_unlock(&dvobjpriv->usb_vendor_req_mutex);
-
+end:
+	kfree(io_buf);
 	return status;
 }
 
drivers/staging/r8188eu/include/drv_types.h +0 -5
index 626c6273be6f..499b2bce8cbe 100644
@@ -168,11 +168,6 @@ struct dvobj_priv {
 	int	ep_num[5]; /* endpoint number */
 	int	RegUsbSS;
 	struct semaphore usb_suspend_sema;
-	struct mutex  usb_vendor_req_mutex;
-
-	u8 *usb_alloc_vendor_req_buf;
-	u8 *usb_vendor_req_buf;
-
 	struct usb_interface *pusbintf;
 	struct usb_device *pusbdev;
 
drivers/staging/r8188eu/os_dep/usb_intf.c +1 -28
index 306325818a9a..7603cb026368 100644
@@ -73,29 +73,6 @@ static struct rtw_usb_drv rtl8188e_usb_drv = {
 
 static struct rtw_usb_drv *usb_drv = &rtl8188e_usb_drv;
 
-static u8 rtw_init_intf_priv(struct dvobj_priv *dvobj)
-{
-	u8 rst = _SUCCESS;
-
-	mutex_init(&dvobj->usb_vendor_req_mutex);
-
-	dvobj->usb_alloc_vendor_req_buf = kzalloc(MAX_USB_IO_CTL_SIZE, GFP_KERNEL);
-	if (!dvobj->usb_alloc_vendor_req_buf) {
-		DBG_88E("alloc usb_vendor_req_buf failed... /n");
-		rst = _FAIL;
-		goto exit;
-	}
-	dvobj->usb_vendor_req_buf = (u8 *)N_BYTE_ALIGMENT((size_t)(dvobj->usb_alloc_vendor_req_buf), ALIGNMENT_UNIT);
-exit:
-	return rst;
-}
-
-static void rtw_deinit_intf_priv(struct dvobj_priv *dvobj)
-{
-	kfree(dvobj->usb_alloc_vendor_req_buf);
-	mutex_destroy(&dvobj->usb_vendor_req_mutex);
-}
-
 static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 {
 	int	i;
@@ -158,9 +135,6 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 		DBG_88E("NON USB_SPEED_HIGH\n");
 	}
 
-	if (rtw_init_intf_priv(pdvobjpriv) == _FAIL)
-		goto free_dvobj;
-
 	/* 3 misc */
 	sema_init(&pdvobjpriv->usb_suspend_sema, 0);
 	rtw_reset_continual_urb_error(pdvobjpriv);
@@ -169,7 +143,6 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 
 	status = _SUCCESS;
 
-free_dvobj:
 	if (status != _SUCCESS && pdvobjpriv) {
 		usb_set_intfdata(usb_intf, NULL);
 		kfree(pdvobjpriv);
@@ -200,7 +173,7 @@ static void usb_dvobj_deinit(struct usb_interface *usb_intf)
 				usb_reset_device(interface_to_usbdev(usb_intf));
 			}
 		}
-		rtw_deinit_intf_priv(dvobj);
+
 		kfree(dvobj);
 	}
 
Signature · 1 line
2.33.0
#26 lore raw

Re: [PATCH v6 19/19] staging: r8188eu: remove shared buffer for USB requests

Quoted 14 lines · Fabio M. De Francesco

static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) {

drivers/staging/r8188eu/os_dep/usb_intf.c +0 -3
 	int	i;
@@ -158,9 +135,6 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 		DBG_88E("NON USB_SPEED_HIGH\n");
 	}
 
-	if (rtw_init_intf_priv(pdvobjpriv) == _FAIL)
-		goto free_dvobj;
-
 	/* 3 misc */
 	sema_init(&pdvobjpriv->usb_suspend_sema, 0);
 	rtw_reset_continual_urb_error(pdvobjpriv);

drivers/staging/r8188eu/os_dep/usb_intf.c static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) · line 144

Quoted 2 lines
drivers/staging/r8188eu/os_dep/usb_intf.c +0 -0
@@ -169,7 +143,6 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 
 	status = _SUCCESS;
        ^^^^^^^^^^^^^^^^^

drivers/staging/r8188eu/os_dep/usb_intf.c static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) · line 146

Quoted 3 lines
drivers/staging/r8188eu/os_dep/usb_intf.c +0 -1
-free_dvobj:
 	if (status != _SUCCESS && pdvobjpriv) {
            ^^^^^^^^^^^^^^^^^^

status is going to be _SUCCESS so we can delete this if statement.

drivers/staging/r8188eu/os_dep/usb_intf.c static void usb_dvobj_deinit(struct usb_interface *usb_intf) · line 178

Quoted 10 lines
drivers/staging/r8188eu/os_dep/usb_intf.c +1 -1
 		usb_set_intfdata(usb_intf, NULL);
 		kfree(pdvobjpriv);
@@ -200,7 +173,7 @@ static void usb_dvobj_deinit(struct usb_interface *usb_intf)
 				usb_reset_device(interface_to_usbdev(usb_intf));
 			}
 		}
-		rtw_deinit_intf_priv(dvobj);
+
 		kfree(dvobj);
 	}

regards,
dan carpenter

#27 lore raw

Re: [PATCH v6 19/19] staging: r8188eu: remove shared buffer for USB requests

Quoted 16 lines · Dan Carpenter
Quoted 15 lines · Fabio M. De Francesco

static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) {

drivers/staging/r8188eu/os_dep/usb_intf.c +0 -3
 	int	i;
@@ -158,9 +135,6 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 		DBG_88E("NON USB_SPEED_HIGH\n");
 	}
 
-	if (rtw_init_intf_priv(pdvobjpriv) == _FAIL)
-		goto free_dvobj;
-
 	/* 3 misc */
 	sema_init(&pdvobjpriv->usb_suspend_sema, 0);
 	rtw_reset_continual_urb_error(pdvobjpriv);
@@ -169,7 +143,6 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 
Quoted 9 lines

drivers/staging/r8188eu/os_dep/usb_intf.c static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) · line 144

Quoted 1 line
drivers/staging/r8188eu/os_dep/usb_intf.c +0 -0
 	status = _SUCCESS;
         ^^^^^^^^^^^^^^^^^

drivers/staging/r8188eu/os_dep/usb_intf.c static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) · line 146

Quoted 3 lines
drivers/staging/r8188eu/os_dep/usb_intf.c +0 -1
-free_dvobj:
 	if (status != _SUCCESS && pdvobjpriv) {
             ^^^^^^^^^^^^^^^^^^

status is going to be _SUCCESS so we can delete this if statement.

silly mistake :(

will be fixed in v7, thanks so much for review

Quoted 11 lines

drivers/staging/r8188eu/os_dep/usb_intf.c static void usb_dvobj_deinit(struct usb_interface *usb_intf) · line 178

Quoted 10 lines
drivers/staging/r8188eu/os_dep/usb_intf.c +1 -1
 		usb_set_intfdata(usb_intf, NULL);
 		kfree(pdvobjpriv);
@@ -200,7 +173,7 @@ static void usb_dvobj_deinit(struct usb_interface *usb_intf)
 				usb_reset_device(interface_to_usbdev(usb_intf));
 			}
 		}
-		rtw_deinit_intf_priv(dvobj);
+
 		kfree(dvobj);
 	}

With regards,
Pavel Skripkin