Bluetooth: hci_sock: Add support for BT_{SND,RCV}BUF
Subsystems (2)
Luiz Augusto von Dentz
maintainerPATCH v6 1/4 Bluetooth: hci_sock: Add support for BT_{SND,RCV}BUF
From: Luiz Augusto von Dentz <[email protected]>
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on the channel usage.
--- net/bluetooth/hci_sock.c | 102 ++++++++++++++++++++++++++++++++++----- 1 file changed, 91 insertions(+), 11 deletions(-)
net/bluetooth/hci_sock.c +91 -11
@@ -57,6 +57,7 @@ struct hci_pinfo {unsigned long flags;__u32 cookie;char comm[TASK_COMM_LEN ]; +__u16 mtu; };static struct hci_dev *hci_hdev_from_sock (struct sock *sk)
@@ -1374,6 +1375,10 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr,break ; } +/* Default MTU to HCI_MAX_FRAME_SIZE if not set */ +if (!hci_pi (sk)->mtu) +hci_pi (sk)->mtu =HCI_MAX_FRAME_SIZE ; + sk->sk_state =BT_BOUND ; done:
@@ -1719,7 +1724,7 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg,if (flags & ~(MSG_DONTWAIT |MSG_NOSIGNAL |MSG_ERRQUEUE |MSG_CMSG_COMPAT ))return -EINVAL ; -if (len <4 || len >HCI_MAX_FRAME_SIZE ) +if (len <4 || len >hci_pi (sk)->mtu)return -EINVAL ; buf =kmalloc (len,GFP_KERNEL );
@@ -1849,8 +1854,8 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg, goto done; } -static int hci_sock_setsockopt (struct socket *sock,int level,int optname, -sockptr_t optval,unsigned int len) +static int hci_sock_setsockopt_old (struct socket *sock,int level,int optname, +sockptr_t optval,unsigned int len) {struct hci_ufilter uf = { .opcode =0 };struct sock *sk = sock->sk;
@@ -1858,9 +1863,6 @@ static int hci_sock_setsockopt(struct socket *sock, int level, int optname,BT_DBG ("sk %p, opt %d" , sk, optname); -if (level !=SOL_HCI ) -return -ENOPROTOOPT ; -lock_sock (sk);if (hci_pi (sk)->channel !=HCI_CHANNEL_RAW ) {
@@ -1935,18 +1937,63 @@ static int hci_sock_setsockopt(struct socket *sock, int level, int optname,return err; } -static int hci_sock_getsockopt (struct socket *sock,int level,int optname, -char __user *optval,int __user *optlen) +static int hci_sock_setsockopt (struct socket *sock,int level,int optname, +sockptr_t optval,unsigned int len) { -struct hci_ufilter uf;struct sock *sk = sock->sk; -int len, opt, err =0 ; +int err =0 , opt =0 ;BT_DBG ("sk %p, opt %d" , sk, optname); -if (level !=SOL_HCI ) +if (level ==SOL_HCI ) +return hci_sock_setsockopt_old (sock, level, optname, optval, + len); + +if (level !=SOL_BLUETOOTH )return -ENOPROTOOPT ; +lock_sock (sk); + +switch (optname) { +case BT_SNDMTU : +case BT_RCVMTU : +switch (hci_pi (sk)->channel) { +/* Don't allow changing MTU for channels that are meant for HCI +* traffic only. +*/ +case HCI_CHANNEL_RAW : +case HCI_CHANNEL_USER : + err = -ENOPROTOOPT ; + goto done; + } + +if (copy_from_sockptr (&opt, optval,sizeof (u16))) { + err = -EFAULT ; +break ; + } + +hci_pi (sk)->mtu = opt; +break ; + +default : + err = -ENOPROTOOPT ; +break ; + } + +done: +release_sock (sk); +return err; +} + +static int hci_sock_getsockopt_old (struct socket *sock,int level,int optname, +char __user *optval,int __user *optlen) +{ +struct hci_ufilter uf; +struct sock *sk = sock->sk; +int len, opt, err =0 ; + +BT_DBG ("sk %p, opt %d" , sk, optname); +if (get_user (len, optlen))return -EFAULT ;
@@ -2004,6 +2051,39 @@ static int hci_sock_getsockopt(struct socket *sock, int level, int optname,return err; } +static int hci_sock_getsockopt (struct socket *sock,int level,int optname, +char __user *optval,int __user *optlen) +{ +struct sock *sk = sock->sk; +int err =0 ; + +BT_DBG ("sk %p, opt %d" , sk, optname); + +if (level ==SOL_HCI ) +return hci_sock_getsockopt_old (sock, level, optname, optval, + optlen); + +if (level !=SOL_BLUETOOTH ) +return -ENOPROTOOPT ; + +lock_sock (sk); + +switch (optname) { +case BT_SNDMTU : +case BT_RCVMTU : +if (put_user (hci_pi (sk)->mtu, (u16 __user *)optval)) + err = -EFAULT ; +break ; + +default : + err = -ENOPROTOOPT ; +break ; + } + +release_sock (sk); +return err; +} +static const struct proto_ops hci_sock_ops = { .family =PF_BLUETOOTH , .owner =THIS_MODULE ,
Signature · 1 line
2.31.1
Luiz Augusto von Dentz
maintainerPATCH v6 2/4 Bluetooth: hci_sock: Replace use of memcpy_from_msg with bt_skb_sendmsg
From: Luiz Augusto von Dentz <[email protected]>
This makes use of bt_skb_sendmsg instead of allocating a different buffer to be used with memcpy_from_msg which cause one extra copy.
--- net/bluetooth/hci_sock.c | 100 +++++++++++++++------------------------ 1 file changed, 37 insertions(+), 63 deletions(-)
net/bluetooth/hci_sock.c +37 -63
@@ -1510,7 +1510,8 @@ static int hci_sock_recvmsg(struct socket *sock, struct msghdr *msg,return err ? : copied; } -static int hci_mgmt_cmd (struct hci_mgmt_chan *chan,struct sock *sk,void *buf,size_t msglen) +static int hci_mgmt_cmd (struct hci_mgmt_chan *chan,struct sock *sk, +struct sk_buff *skb) {u8 *cp;struct mgmt_hdr *hdr;
@@ -1520,31 +1521,31 @@ static int hci_mgmt_cmd(struct hci_mgmt_chan *chan, struct sock *sk, void *buf,bool var_len, no_hdev;int err; -BT_DBG ("got %zu bytes" , msglen); +BT_DBG ("got %d bytes" , skb->len); -if (msglen <sizeof (*hdr)) +if (skb->len <sizeof (*hdr))return -EINVAL ; - hdr = buf; + hdr = (void *)skb->data; opcode =__le16_to_cpu (hdr->opcode); index =__le16_to_cpu (hdr->index); len =__le16_to_cpu (hdr->len); -if (len != msglen -sizeof (*hdr)) { +if (len != skb->len -sizeof (*hdr)) { err = -EINVAL ; goto done; }if (chan->channel ==HCI_CHANNEL_CONTROL ) { -struct sk_buff *skb; +struct sk_buff *cmd;/* Send event to monitor */ - skb =create_monitor_ctrl_command (sk, index, opcode, len, - buf +sizeof (*hdr)); -if (skb) { -hci_send_to_channel (HCI_CHANNEL_MONITOR , skb, + cmd =create_monitor_ctrl_command (sk, index, opcode, len, + skb->data +sizeof (*hdr)); +if (cmd) { +hci_send_to_channel (HCI_CHANNEL_MONITOR , cmd,HCI_SOCK_TRUSTED ,NULL ); -kfree_skb (skb); +kfree_skb (cmd); } }
@@ -1609,13 +1610,13 @@ static int hci_mgmt_cmd(struct hci_mgmt_chan *chan, struct sock *sk, void *buf,if (hdev && chan->hdev_init) chan->hdev_init (sk, hdev); - cp = buf +sizeof (*hdr); + cp = skb->data +sizeof (*hdr); err = handler->func (sk, hdev, cp, len);if (err <0 ) goto done; - err = msglen; + err = skb->len; done:if (hdev)
@@ -1624,10 +1625,10 @@ static int hci_mgmt_cmd(struct hci_mgmt_chan *chan, struct sock *sk, void *buf,return err; } -static int hci_logging_frame (struct sock *sk,void *buf,int len,unsigned int flags) +static int hci_logging_frame (struct sock *sk,struct sk_buff *skb, +unsigned int flags) {struct hci_mon_hdr *hdr; -struct sk_buff *skb;struct hci_dev *hdev;u16 index;int err;
@@ -1636,21 +1637,13 @@ static int hci_logging_frame(struct sock *sk, void *buf, int len, unsigned int f* the priority byte, the ident length byte and at least one string * terminator NUL byte. Anything shorter are invalid packets. */ -if (len <sizeof (*hdr) +3 ) +if (skb->len <sizeof (*hdr) +3 )return -EINVAL ; - skb =bt_skb_send_alloc (sk, len, flags &MSG_DONTWAIT , &err); -if (!skb) -return err; - -memcpy (skb_put (skb, len), buf, len); - hdr = (void *)skb->data; -if (__le16_to_cpu (hdr->len) != len -sizeof (*hdr)) { - err = -EINVAL ; - goto drop; - } +if (__le16_to_cpu (hdr->len) != skb->len -sizeof (*hdr)) +return -EINVAL ;if (__le16_to_cpu (hdr->opcode) ==0x0000 ) {__u8 priority = skb->data[sizeof (*hdr)];
@@ -1669,25 +1662,20 @@ static int hci_logging_frame(struct sock *sk, void *buf, int len, unsigned int f* The message follows the ident string (if present) and * must be NUL terminated. Otherwise it is not a valid packet. */ -if (priority >7 || skb->data[len -1 ] !=0x00 || - ident_len > len -sizeof (*hdr) -3 || - skb->data[sizeof (*hdr) + ident_len +1 ] !=0x00 ) { - err = -EINVAL ; - goto drop; - } +if (priority >7 || skb->data[skb->len -1 ] !=0x00 || + ident_len > skb->len -sizeof (*hdr) -3 || + skb->data[sizeof (*hdr) + ident_len +1 ] !=0x00 ) +return -EINVAL ; }else { - err = -EINVAL ; - goto drop; +return -EINVAL ; } index =__le16_to_cpu (hdr->index);if (index !=MGMT_INDEX_NONE ) { hdev =hci_dev_get (index); -if (!hdev) { - err = -ENODEV ; - goto drop; - } +if (!hdev) +return -ENODEV ; }else { hdev =NULL ; }
@@ -1695,13 +1683,11 @@ static int hci_logging_frame(struct sock *sk, void *buf, int len, unsigned int f hdr->opcode =cpu_to_le16 (HCI_MON_USER_LOGGING );hci_send_to_channel (HCI_CHANNEL_MONITOR , skb,HCI_SOCK_TRUSTED ,NULL ); - err = len; + err = skb->len;if (hdev)hci_dev_put (hdev); -drop: -kfree_skb (skb);return err; }
@@ -1713,7 +1699,6 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg,struct hci_dev *hdev;struct sk_buff *skb;int err; -void *buf;const unsigned int flags = msg->msg_flags;BT_DBG ("sock %p sk %p" , sock, sk);
@@ -1727,13 +1712,9 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg,if (len <4 || len >hci_pi (sk)->mtu)return -EINVAL ; - buf =kmalloc (len,GFP_KERNEL ); -if (!buf) -return -ENOMEM ; -if (memcpy_from_msg (buf, msg, len)) { -kfree (buf); -return -EFAULT ; - } + skb =bt_skb_sendmsg (sk, msg, len, len,0 ,0 ); +if (IS_ERR (skb)) +return PTR_ERR (skb);lock_sock (sk);
@@ -1743,39 +1724,33 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg,break ;case HCI_CHANNEL_MONITOR : err = -EOPNOTSUPP ; - goto done; + goto drop;case HCI_CHANNEL_LOGGING : - err =hci_logging_frame (sk, buf, len, flags); - goto done; + err =hci_logging_frame (sk, skb, flags); + goto drop;default :mutex_lock (&mgmt_chan_list_lock); chan =__hci_mgmt_chan_find (hci_pi (sk)->channel);if (chan) - err =hci_mgmt_cmd (chan, sk, buf, len); + err =hci_mgmt_cmd (chan, sk, skb);else err = -EINVAL ;mutex_unlock (&mgmt_chan_list_lock); - goto done; + goto drop; } hdev =hci_hdev_from_sock (sk);if (IS_ERR (hdev)) { err =PTR_ERR (hdev); - goto done; + goto drop; }if (!test_bit (HCI_UP , &hdev->flags)) { err = -ENETDOWN ; - goto done; + goto drop; } - skb =bt_skb_send_alloc (sk, len, flags &MSG_DONTWAIT , &err); -if (!skb) - goto done; - -memcpy (skb_put (skb, len), buf, len); -hci_skb_pkt_type (skb) = skb->data[0 ];skb_pull (skb,1 );
@@ -1846,7 +1821,6 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg, done:release_sock (sk); -kfree (buf);return err; drop:
Signature · 1 line
2.31.1
Luiz Augusto von Dentz
maintainerPATCH v6 3/4 Bluetooth: Fix passing NULL to PTR_ERR
In reply to Luiz Augusto von DentzFrom: Luiz Augusto von Dentz <[email protected]>
Passing NULL to PTR_ERR will result in 0 (success), also since the likes of bt_skb_sendmsg does never return NULL it is safe to replace the instances of IS_ERR_OR_NULL with IS_ERR when checking its return.
--- include/net/bluetooth/bluetooth.h | 2 +- net/bluetooth/rfcomm/sock.c | 2 +- net/bluetooth/sco.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
include/net/bluetooth/bluetooth.h +1 -1
@@ -496,7 +496,7 @@ static inline struct sk_buff *bt_skb_sendmmsg(struct sock *sk,struct sk_buff *tmp; tmp =bt_skb_sendmsg (sk, msg, len, mtu, headroom, tailroom); -if (IS_ERR_OR_NULL (tmp)) { +if (IS_ERR (tmp)) {kfree_skb (skb);return tmp; }
net/bluetooth/rfcomm/sock.c +1 -1
@@ -583,7 +583,7 @@ static int rfcomm_sock_sendmsg(struct socket *sock, struct msghdr *msg, skb =bt_skb_sendmmsg (sk, msg, len, d->mtu,RFCOMM_SKB_HEAD_RESERVE ,RFCOMM_SKB_TAIL_RESERVE ); -if (IS_ERR_OR_NULL (skb)) +if (IS_ERR (skb))return PTR_ERR (skb); sent =rfcomm_dlc_send (d, skb);
net/bluetooth/sco.c +1 -1
@@ -733,7 +733,7 @@ static int sco_sock_sendmsg(struct socket *sock, struct msghdr *msg,return -EOPNOTSUPP ; skb =bt_skb_sendmsg (sk, msg, len, len,0 ,0 ); -if (IS_ERR_OR_NULL (skb)) +if (IS_ERR (skb))return PTR_ERR (skb);lock_sock (sk);
Signature · 1 line
2.31.1
Luiz Augusto von Dentz
maintainerPATCH v6 4/4 Bluetooth: SCO: Fix sco_send_frame returning skb->len
In reply to Luiz Augusto von DentzFrom: Luiz Augusto von Dentz <[email protected]>
The skb in modified by hci_send_sco which pushes SCO headers thus changing skb->len causing sco_sock_sendmsg to fail.
--- net/bluetooth/sco.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
net/bluetooth/sco.c +6 -4
@@ -284,16 +284,17 @@ static int sco_connect(struct hci_dev *hdev, struct sock *sk)static int sco_send_frame (struct sock *sk,struct sk_buff *skb) {struct sco_conn *conn =sco_pi (sk)->conn; +int len = skb->len;/* Check outgoing MTU */ -if (skb->len > conn->mtu) +if (len > conn->mtu)return -EINVAL ; -BT_DBG ("sk %p len %d" , sk, skb->len); +BT_DBG ("sk %p len %d" , sk, len);hci_send_sco (conn->hcon, skb); -return skb->len; +return len; }static void sco_recv_frame (struct sco_conn *conn,struct sk_buff *skb)
@@ -744,7 +745,8 @@ static int sco_sock_sendmsg(struct socket *sock, struct msghdr *msg, err = -ENOTCONN ;release_sock (sk); -if (err) + +if (err <0 )kfree_skb (skb);return err; }
Signature · 1 line
2.31.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=548423
---Test result---
Test Summary:
CheckPatch FAIL 1.53 seconds GitLint FAIL 1.20 seconds BuildKernel PASS 568.47 seconds TestRunner: Setup PASS 372.38 seconds TestRunner: l2cap-tester PASS 2.81 seconds TestRunner: bnep-tester PASS 2.05 seconds TestRunner: mgmt-tester PASS 32.54 seconds TestRunner: rfcomm-tester PASS 2.30 seconds TestRunner: sco-tester PASS 2.27 seconds TestRunner: smp-tester PASS 2.28 seconds TestRunner: userchan-tester PASS 2.10 seconds
Details
##############################
Test: CheckPatch - FAIL - 1.53 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
[v6,3/4] Bluetooth: Fix passing NULL to PTR_ERR\WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line) #92:bt_skb_sendmsg does never return NULL it is safe to replace the instances of
total: 0 errors, 1 warnings, 0 checks, 24 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/12500201.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL - 1.20 seconds
Run gitlint with rule in .gitlint
[v6,4/4] Bluetooth: SCO: Fix sco_send_frame returning skb->len
6: B1 Line exceeds max length (90>80): "Fixes: 0771cbb3b97d ("Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsg")"
---
Regards,
Linux Bluetooth
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e732e0input_len: 0x000000000036b11f
output: 0x0000000001000000output_len: 0x00000000011ac024kernel_total_size: 0x0000000001030000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.
Linux version 5.14.0-rc7-gae260127d473 (root@8bec691a0cc4) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Thu Sep 16 21:01:27 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
New process 44 created
Changing into directory /github/workspace
Basic L2CAP Socket - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback
Index: 0x0000
Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done
Non-connected getpeername - Failure - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback
Index: 0x0000
Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done
L2CAP BR/EDR Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done
L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done
L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done
L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done
L2CAP BR/EDR Client - Read Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done
L2CAP BR/EDR Client - Write Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done
L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done
L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done
L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done
L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done
L2CAP BR/EDR Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done
L2CAP BR/EDR Server - Read Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done
L2CAP BR/EDR Server - Write Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done
L2CAP BR/EDR Server - Security Block - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done
L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done
L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done
L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done
L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done
L2CAP LE Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done
L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done
L2CAP LE Client SMP - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done
L2CAP LE Client - Command Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done
L2CAP LE Client - Connection Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done
L2CAP LE Client - Close socket 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 13
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done
L2CAP LE Client - Close socket 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 13
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done
L2CAP LE Client - Open two sockets - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 13
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed
(l2cap-tester:44): GLib-WARNING **: 21:01:35.903: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done
L2CAP LE Client - Open two sockets close one - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 13
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed
(l2cap-tester:44): GLib-WARNING **: 21:01:35.935: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done
L2CAP LE Client - Invalid PSM - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done
L2CAP LE Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done
L2CAP LE Server - Nval SCID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done
L2CAP Ext-Flowctl Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Connect in progress
Successfully connected
L2CAP Ext-Flowctl Client - Success - test passed L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done
L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test passed L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done
L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP Ext-Flowctl Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done
L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP Ext-Flowctl Client - Command Reject - test passed L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done
L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Connect in progress, sk = 13 (deferred)
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
Bluetooth: hci0: link tx timeout
L2CAP Ext-Flowctl Client - Open two sockets - test passed
(l2cap-tester:44): GLib-WARNING **: 21:01:36.079: Invalid file descriptor. L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done
L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Connect in progress, sk = 13 (deferred)
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP Ext-Flowctl Client - Open two sockets close one - test passed
(l2cap-tester:44): GLib-WARNING **: 21:01:36.104: Invalid file descriptor. L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done
L2CAP LE ATT Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done
L2CAP LE ATT Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done
Test Summary
------------
Basic L2CAP Socket - Success Passed 0.059 seconds Non-connected getpeername - Failure Passed 0.017 seconds L2CAP BR/EDR Client - Success Passed 0.026 seconds L2CAP BR/EDR Client SSP - Success 1 Passed 0.028 seconds L2CAP BR/EDR Client SSP - Success 2 Passed 0.019 seconds L2CAP BR/EDR Client PIN Code - Success Passed 0.019 seconds L2CAP BR/EDR Client - Read Success Passed 0.018 seconds L2CAP BR/EDR Client - Write Success Passed 0.014 seconds L2CAP BR/EDR Client - Invalid PSM 1 Passed 0.017 seconds L2CAP BR/EDR Client - Invalid PSM 2 Passed 0.014 seconds L2CAP BR/EDR Client - Invalid PSM 3 Passed 0.018 seconds L2CAP BR/EDR Client - Socket Shut WR Success Passed 0.017 seconds L2CAP BR/EDR Server - Success Passed 0.017 seconds L2CAP BR/EDR Server - Read Success Passed 0.013 seconds L2CAP BR/EDR Server - Write Success Passed 0.018 seconds L2CAP BR/EDR Server - Security Block Passed 0.017 seconds L2CAP BR/EDR Server - Invalid PSM Passed 0.014 seconds L2CAP BR/EDR Server - Invalid PDU Passed 0.013 seconds L2CAP BR/EDR Server - Invalid Disconnect CID Passed 0.015 seconds L2CAP BR/EDR Server - Invalid Config CID Passed 0.016 seconds L2CAP LE Client - Success Passed 0.023 seconds L2CAP LE Client, Direct Advertising - Success Passed 0.017 seconds L2CAP LE Client SMP - Success Passed 0.028 seconds L2CAP LE Client - Command Reject Passed 0.014 seconds L2CAP LE Client - Connection Reject Passed 0.020 seconds L2CAP LE Client - Close socket 1 Passed 0.012 seconds L2CAP LE Client - Close socket 2 Passed 0.016 seconds L2CAP LE Client - Open two sockets Passed 0.049 seconds L2CAP LE Client - Open two sockets close one Passed 0.020 seconds L2CAP LE Client - Invalid PSM Passed 0.019 seconds L2CAP LE Server - Success Passed 0.019 seconds L2CAP LE Server - Nval SCID Passed 0.019 seconds L2CAP Ext-Flowctl Client - Success Passed 0.016 seconds L2CAP Ext-Flowctl Client, Direct Advertising - Success Passed 0.013 seconds L2CAP Ext-Flowctl Client SMP - Success Passed 0.018 seconds L2CAP Ext-Flowctl Client - Command Reject Passed 0.017 seconds L2CAP Ext-Flowctl Client - Open two sockets Passed 0.018 seconds L2CAP Ext-Flowctl Client - Open two sockets close one Passed 0.022 seconds L2CAP LE ATT Client - Success Passed 0.014 seconds L2CAP LE ATT Server - Success Passed 0.011 seconds
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.809 seconds
Process 44 exited with status 0
reboot: Restarting system
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e732e0input_len: 0x000000000036b11f
output: 0x0000000001000000output_len: 0x00000000011ac024kernel_total_size: 0x0000000001030000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc7-gae260127d473 (root@8bec691a0cc4) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Thu Sep 16 21:01:27 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 44 created
Changing into directory /github/workspace
Basic BNEP Socket - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback
Index: 0x0000
Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done
Test Summary
------------
Basic BNEP Socket - Success Passed 0.060 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0681 seconds Process 44 exited with status 0
reboot: Restarting system
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e732e0input_len: 0x000000000036b11f
output: 0x0000000001000000output_len: 0x00000000011ac024kernel_total_size: 0x0000000001030000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc7-gae260127d473 (root@8bec691a0cc4) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Thu Sep 16 21:01:27 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
New process 44 created
Changing into directory /github/workspace
Controller setup - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback
Index: 0x0000
Controller setup - teardown complete
Controller setup - done
Controller setup (BR/EDR-only) - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback
Index: 0x0000
Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done
Controller setup (LE) - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback
Index: 0x0000
Controller setup (LE) - teardown complete
Controller setup (LE) - done
Invalid command - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback
Index: 0x0000
Invalid command - teardown complete
Invalid command - done
Read version - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback
Index: 0x0000
Read version - Success - teardown complete
Read version - Success - done
Read version - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done
Read version - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read version - Invalid index - teardown complete
Read version - Invalid index - done
Read commands - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done
Read commands - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read commands - Invalid index - teardown complete
Read commands - Invalid index - done
Read index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done
Read index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read index list - Invalid index - teardown complete Read index list - Invalid index - done
Read info - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done
Read info - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read info - Invalid index - teardown complete
Read info - Invalid index - done
Read unconfigured index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done
Read unconfigured index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done
Read configuration info - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done
Read configuration info - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done
Read extended index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done
Read extended index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done
Set powered on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set powered on - Success - teardown complete
Set powered on - Success - done
Set powered on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done
Set powered on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done
Set powered on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done
Set powered on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done
Set powered on - Privacy and Advertising - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set powered on - Privacy and Advertising - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback
Index: 0x0000
Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done
Set powered off - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Success - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback
Index: 0x0000
Set powered off - Success - teardown complete
Set powered off - Success - done
Set powered off - Class of Device - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback
Index: 0x0000
Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done
Set powered off - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done
Set powered off - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done
Set powered off - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done
Set connectable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done
Set connectable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done
Set connectable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done
Set connectable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done
Set connectable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done
Set connectable on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done
Set connectable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done
Set connectable on (LE) - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done
Set connectable on (LE) - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done
Set connectable off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done
Set connectable off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done
Set connectable off - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done
Set connectable off - Success 4 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done
Set connectable off (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done
Set connectable off (LE) - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done
Set connectable off (LE) - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done
Set connectable off (LE) - Success 4 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 4 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done
Set fast connectable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done
Set fast connectable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done
Set fast connectable on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done
Set fast connectable on - Invalid Params 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done
Set fast connectable on - Not Supported 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done
Set bondable on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Success - teardown complete
Set bondable on - Success - done
Set bondable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done
Set bondable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done
Set bondable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done
Set bondable on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done
Set discoverable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done
Set discoverable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done
Set discoverable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done
Set discoverable on - Invalid parameters 4 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done
Set discoverable on - Not powered 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done
Set discoverable on - Not powered 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Not powered 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done
Set discoverable on - Rejected 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done
Set discoverable on - Rejected 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done
Set discoverable on - Rejected 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done
Set discoverable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done
Set discoverable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done
Set discoverable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done
Set discoverable off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done
Set discoverable off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done
Set limited discoverable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done
Set limited discoverable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done
Set limited discoverable on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done
Set limited discoverable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done
Set link security on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done
Set link security on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done
Set link security on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done
Set link security on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done
Set link security on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done
Set link security on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done
Set link security on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done
Set link security off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done
Set link security off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done
Set SSP on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done
Set SSP on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done
Set SSP on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done
Set SSP on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done
Set SSP on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done
Set SSP on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done
Set SSP on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done
Set Secure Connections on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done
Set Secure Connections on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done
Set Secure Connections on - Invalid params 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done
Set Secure Connections on - Invalid params 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done
Set Secure Connections on - Invalid params 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done
Set Secure Connections on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid index - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done
Set Secure Connections on - Not supported 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done
Set Secure Connections on - Not supported 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done
Set Secure Connections Only on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done
Set Secure Connections Only on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done
Set High Speed on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Success - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Success - setup complete
Set High Speed on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set High Speed (0x000c)
Test condition added, total 2
Set High Speed (0x000c): Success (0x00)
Test condition complete, 1 left
New settings 0x000001c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set High Speed on - Success - test passed
Set High Speed on - Success - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Success - teardown complete
Set High Speed on - Success - done
Set High Speed on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid parameters 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 1 - setup complete Set High Speed on - Invalid parameters 1 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 1 - test passed Set High Speed on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 1 - teardown complete Set High Speed on - Invalid parameters 1 - done
Set High Speed on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid parameters 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 2 - setup complete Set High Speed on - Invalid parameters 2 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 2 - test passed Set High Speed on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 2 - teardown complete Set High Speed on - Invalid parameters 2 - done
Set High Speed on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid parameters 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 3 - setup complete Set High Speed on - Invalid parameters 3 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 3 - test passed Set High Speed on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 3 - teardown complete Set High Speed on - Invalid parameters 3 - done
Set High Speed on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid index - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set High Speed on - Invalid index - setup complete Set High Speed on - Invalid index - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Index (0x11) Test condition complete, 0 left
Set High Speed on - Invalid index - test passed Set High Speed on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid index - teardown complete Set High Speed on - Invalid index - done
Set Low Energy on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done
Set Low Energy on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done
Set Low Energy on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done
Set Low Energy on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done
Set Low Energy on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done
Set Low Energy on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done
Set Low Energy on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done
Set Advertising on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: 15,701 lines not shown · raw message
Part of this message is not shown here. View the raw message.
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=548423
---Test result---
Test Summary:
CheckPatch FAIL 2.55 seconds GitLint FAIL 1.19 seconds BuildKernel PASS 684.73 seconds TestRunner: Setup PASS 444.11 seconds TestRunner: l2cap-tester PASS 3.33 seconds TestRunner: bnep-tester PASS 2.30 seconds TestRunner: mgmt-tester PASS 34.90 seconds TestRunner: rfcomm-tester PASS 2.74 seconds TestRunner: smp-tester PASS 2.61 seconds TestRunner: userchan-tester PASS 2.34 seconds
Details
##############################
Test: CheckPatch - FAIL - 2.55 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
[v6,3/4] Bluetooth: Fix passing NULL to PTR_ERR\WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #92:bt_skb_sendmsg does never return NULL it is safe to replace the instances of
total: 0 errors, 1 warnings, 0 checks, 24 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/12500201.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL - 1.19 seconds
Run gitlint with rule in .gitlint
[v6,4/4] Bluetooth: SCO: Fix sco_send_frame returning skb->len
6: B1 Line exceeds max length (90>80): "Fixes: 0771cbb3b97d ("Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsg")"
---
Regards,
Linux Bluetooth
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e732e0input_len: 0x000000000036b11e
output: 0x0000000001000000output_len: 0x00000000011ac024kernel_total_size: 0x0000000001030000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc7-gdd649eed8995 (root@f86ab7a0f1cb) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Sat Sep 18 02:05:40 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
Changing into directory /github/workspace
New process 44 created
Basic L2CAP Socket - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback
Index: 0x0000
Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done
Non-connected getpeername - Failure - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback
Index: 0x0000
Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done
L2CAP BR/EDR Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done
L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done
L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done
L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done
L2CAP BR/EDR Client - Read Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done
L2CAP BR/EDR Client - Write Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done
L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done
L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done
L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done
L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done
L2CAP BR/EDR Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done
L2CAP BR/EDR Server - Read Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done
L2CAP BR/EDR Server - Write Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done
L2CAP BR/EDR Server - Security Block - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done
L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done
L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done
L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done
L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback
Index: 0x0000
L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done
L2CAP LE Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done
L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done
L2CAP LE Client SMP - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done
L2CAP LE Client - Command Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done
L2CAP LE Client - Connection Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done
L2CAP LE Client - Close socket 1 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 13
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done
L2CAP LE Client - Close socket 2 - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 13
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done
L2CAP LE Client - Open two sockets - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 13
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed
(l2cap-tester:44): GLib-WARNING **: 02:05:49.276: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done
L2CAP LE Client - Open two sockets close one - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 13
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed
(l2cap-tester:44): GLib-WARNING **: 02:05:49.320: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done
L2CAP LE Client - Invalid PSM - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done
L2CAP LE Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done
L2CAP LE Server - Nval SCID - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback
Index: 0x0000
L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done
L2CAP Ext-Flowctl Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Connect in progress
Successfully connected
L2CAP Ext-Flowctl Client - Success - test passed L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done
L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test passed L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done
L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP Ext-Flowctl Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done
L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP Ext-Flowctl Client - Command Reject - test passed L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done
L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Connect in progress, sk = 13 (deferred)
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
Bluetooth: hci0: link tx timeout
L2CAP Ext-Flowctl Client - Open two sockets - test passed
(l2cap-tester:44): GLib-WARNING **: 02:05:49.508: Invalid file descriptor. L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done
L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Connect in progress, sk = 13 (deferred)
HCI Command 0x2011 length 7
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP Ext-Flowctl Client - Open two sockets close one - test passed
(l2cap-tester:44): GLib-WARNING **: 02:05:49.536: Invalid file descriptor. L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback
Index: 0x0000
L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done
L2CAP LE ATT Client - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done
L2CAP LE ATT Server - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback
Index: 0x0000
L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done
Test Summary
------------
Basic L2CAP Socket - Success Passed 0.068 seconds Non-connected getpeername - Failure Passed 0.024 seconds L2CAP BR/EDR Client - Success Passed 0.040 seconds L2CAP BR/EDR Client SSP - Success 1 Passed 0.028 seconds L2CAP BR/EDR Client SSP - Success 2 Passed 0.024 seconds L2CAP BR/EDR Client PIN Code - Success Passed 0.024 seconds L2CAP BR/EDR Client - Read Success Passed 0.020 seconds L2CAP BR/EDR Client - Write Success Passed 0.020 seconds L2CAP BR/EDR Client - Invalid PSM 1 Passed 0.032 seconds L2CAP BR/EDR Client - Invalid PSM 2 Passed 0.028 seconds L2CAP BR/EDR Client - Invalid PSM 3 Passed 0.020 seconds L2CAP BR/EDR Client - Socket Shut WR Success Passed 0.024 seconds L2CAP BR/EDR Server - Success Passed 0.024 seconds L2CAP BR/EDR Server - Read Success Passed 0.024 seconds L2CAP BR/EDR Server - Write Success Passed 0.024 seconds L2CAP BR/EDR Server - Security Block Passed 0.024 seconds L2CAP BR/EDR Server - Invalid PSM Passed 0.024 seconds L2CAP BR/EDR Server - Invalid PDU Passed 0.024 seconds L2CAP BR/EDR Server - Invalid Disconnect CID Passed 0.020 seconds L2CAP BR/EDR Server - Invalid Config CID Passed 0.020 seconds L2CAP LE Client - Success Passed 0.032 seconds L2CAP LE Client, Direct Advertising - Success Passed 0.024 seconds L2CAP LE Client SMP - Success Passed 0.036 seconds L2CAP LE Client - Command Reject Passed 0.020 seconds L2CAP LE Client - Connection Reject Passed 0.020 seconds L2CAP LE Client - Close socket 1 Passed 0.020 seconds L2CAP LE Client - Close socket 2 Passed 0.020 seconds L2CAP LE Client - Open two sockets Passed 0.060 seconds L2CAP LE Client - Open two sockets close one Passed 0.032 seconds L2CAP LE Client - Invalid PSM Passed 0.024 seconds L2CAP LE Server - Success Passed 0.028 seconds L2CAP LE Server - Nval SCID Passed 0.020 seconds L2CAP Ext-Flowctl Client - Success Passed 0.020 seconds L2CAP Ext-Flowctl Client, Direct Advertising - Success Passed 0.024 seconds L2CAP Ext-Flowctl Client SMP - Success Passed 0.024 seconds L2CAP Ext-Flowctl Client - Command Reject Passed 0.020 seconds L2CAP Ext-Flowctl Client - Open two sockets Passed 0.028 seconds L2CAP Ext-Flowctl Client - Open two sockets close one Passed 0.028 seconds L2CAP LE ATT Client - Success Passed 0.020 seconds L2CAP LE ATT Server - Success Passed 0.020 seconds
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 1.08 seconds
Process 44 exited with status 0
reboot: Restarting system
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e732e0input_len: 0x000000000036b11e
output: 0x0000000001000000output_len: 0x00000000011ac024kernel_total_size: 0x0000000001030000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc7-gdd649eed8995 (root@f86ab7a0f1cb) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Sat Sep 18 02:05:40 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 44 created
Changing into directory /github/workspace
Basic BNEP Socket - Success - init
Read Index List callback
Status: 0x00
New hciemu instance created
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: 0x00
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback
Index: 0x0000
Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done
Test Summary
------------
Basic BNEP Socket - Success Passed 0.068 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.076 seconds Process 44 exited with status 0
reboot: Restarting system
c[?7l[2JSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7l[2Jearly console in extract_kernelinput_data: 0x0000000001e732e0input_len: 0x000000000036b11e
output: 0x0000000001000000output_len: 0x00000000011ac024kernel_total_size: 0x0000000001030000needed_size: 0x0000000001200000trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.14.0-rc7-gdd649eed8995 (root@f86ab7a0f1cb) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Sat Sep 18 02:05:40 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner bluetooth.enable_ecred=1TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
signal: max sigframe size: 1040
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
New process 44 created
Changing into directory /github/workspace
Controller setup - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback
Index: 0x0000
Controller setup - teardown complete
Controller setup - done
Controller setup (BR/EDR-only) - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback
Index: 0x0000
Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done
Controller setup (LE) - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback
Index: 0x0000
Controller setup (LE) - teardown complete
Controller setup (LE) - done
Invalid command - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback
Index: 0x0000
Invalid command - teardown complete
Invalid command - done
Read version - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback
Index: 0x0000
Read version - Success - teardown complete
Read version - Success - done
Read version - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done
Read version - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read version - Invalid index - teardown complete
Read version - Invalid index - done
Read commands - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done
Read commands - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read commands - Invalid index - teardown complete
Read commands - Invalid index - done
Read index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done
Read index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read index list - Invalid index - teardown complete Read index list - Invalid index - done
Read info - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done
Read info - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read info - Invalid index - teardown complete
Read info - Invalid index - done
Read unconfigured index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done
Read unconfigured index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done
Read configuration info - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done
Read configuration info - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done
Read extended index list - Invalid parameters - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback
Index: 0x0000
Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done
Read extended index list - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback
Index: 0x0000
Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done
Set powered on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set powered on - Success - teardown complete
Set powered on - Success - done
Set powered on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done
Set powered on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done
Set powered on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done
Set powered on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done
Set powered on - Privacy and Advertising - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set powered on - Privacy and Advertising - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback
Index: 0x0000
Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done
Set powered off - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Success - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback
Index: 0x0000
Set powered off - Success - teardown complete
Set powered off - Success - done
Set powered off - Class of Device - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback
Index: 0x0000
Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done
Set powered off - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done
Set powered off - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done
Set powered off - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set powered off - Invalid parameters 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done
Set connectable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done
Set connectable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done
Set connectable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done
Set connectable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done
Set connectable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done
Set connectable on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done
Set connectable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done
Set connectable on (LE) - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done
Set connectable on (LE) - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable on (LE) - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done
Set connectable off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done
Set connectable off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done
Set connectable off - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done
Set connectable off - Success 4 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done
Set connectable off (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done
Set connectable off (LE) - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done
Set connectable off (LE) - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done
Set connectable off (LE) - Success 4 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set connectable off (LE) - Success 4 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done
Set fast connectable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done
Set fast connectable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done
Set fast connectable on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done
Set fast connectable on - Invalid Params 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done
Set fast connectable on - Not Supported 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback
Index: 0x0000
Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done
Set bondable on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Success - teardown complete
Set bondable on - Success - done
Set bondable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done
Set bondable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done
Set bondable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done
Set bondable on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done
Set discoverable on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done
Set discoverable on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done
Set discoverable on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done
Set discoverable on - Invalid parameters 4 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done
Set discoverable on - Not powered 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done
Set discoverable on - Not powered 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Not powered 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done
Set discoverable on - Rejected 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done
Set discoverable on - Rejected 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done
Set discoverable on - Rejected 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Rejected 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done
Set discoverable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done
Set discoverable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done
Set discoverable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done
Set discoverable off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done
Set discoverable off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set discoverable off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback
Index: 0x0000
Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done
Set limited discoverable on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done
Set limited discoverable on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done
Set limited discoverable on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set limited discoverable on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done
Set limited discoverable on (LE) - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001be1b
Current settings: 0x00000200
Class: 0x000000
Name:
Short name: Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done
Set link security on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done
Set link security on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done
Set link security on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done
Set link security on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done
Set link security on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done
Set link security on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done
Set link security on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done
Set link security off - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security off - Success 1 - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done
Set link security off - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set link security off - Success 2 - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done
Set SSP on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done
Set SSP on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done
Set SSP on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done
Set SSP on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done
Set SSP on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done
Set SSP on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done
Set SSP on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done
Set Secure Connections on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done
Set Secure Connections on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done
Set Secure Connections on - Invalid params 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done
Set Secure Connections on - Invalid params 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done
Set Secure Connections on - Invalid params 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done
Set Secure Connections on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Invalid index - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done
Set Secure Connections on - Not supported 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done
Set Secure Connections on - Not supported 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Bluetooth: hci0: Failed to read codec capabilities (-56)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x05
Manufacturer: 0x003f
Supported settings: 0x000111ff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done
Set Secure Connections Only on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done
Set Secure Connections Only on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done
Set High Speed on - Success - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Success - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Success - setup complete
Set High Speed on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set High Speed (0x000c)
Test condition added, total 2
Set High Speed (0x000c): Success (0x00)
Test condition complete, 1 left
New settings 0x000001c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set High Speed on - Success - test passed
Set High Speed on - Success - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Success - teardown complete
Set High Speed on - Success - done
Set High Speed on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid parameters 1 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 1 - setup complete Set High Speed on - Invalid parameters 1 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 1 - test passed Set High Speed on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 1 - teardown complete Set High Speed on - Invalid parameters 1 - done
Set High Speed on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid parameters 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 2 - setup complete Set High Speed on - Invalid parameters 2 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 2 - test passed Set High Speed on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 2 - teardown complete Set High Speed on - Invalid parameters 2 - done
Set High Speed on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid parameters 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set High Speed on - Invalid parameters 3 - setup complete Set High Speed on - Invalid parameters 3 - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Parameters (0x0d) Test condition complete, 0 left
Set High Speed on - Invalid parameters 3 - test passed Set High Speed on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid parameters 3 - teardown complete Set High Speed on - Invalid parameters 3 - done
Set High Speed on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set High Speed on - Invalid index - setup
Initial settings completed
Test setup condition added, total 1 Client set connectable: Success (0x00) Test setup condition complete, 0 left
Set High Speed on - Invalid index - setup complete Set High Speed on - Invalid index - run
Sending Set High Speed (0x000c)
Test condition added, total 1
Set High Speed (0x000c): Invalid Index (0x11) Test condition complete, 0 left
Set High Speed on - Invalid index - test passed Set High Speed on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set High Speed on - Invalid index - teardown complete Set High Speed on - Invalid index - done
Set Low Energy on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done
Set Low Energy on - Success 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 2 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done
Set Low Energy on - Success 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Success 3 - setup
Initial settings completed
Test setup condition added, total 1
Client set connectable: Success (0x00)
Test setup condition complete, 0 left
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback
Index: 0x0000
Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done
Set Low Energy on - Invalid parameters 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done
Set Low Energy on - Invalid parameters 2 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done
Set Low Energy on - Invalid parameters 3 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done
Set Low Energy on - Invalid index - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback
Index: 0x0000
Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done
Set Advertising on - Success 1 - init
Read Version callback
Status: Success (0x00)
Version 1.21
Read Commands callback
Status: Success (0x00)
Read Index List callback
Status: Success (0x00)
Index Added callback
Index: 0x0000
Read Info callback
Status: Success (0x00)
Address: 00:AA:01:00:00:00
Version: 0x09
Manufacturer: 0x003f
Supported settings: 0x0001bfff
Current settings: 0x00000080
Class: 0x000000
Name:
Short name: 15,343 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Marcel Holtmann
maintainerHi Luiz,
Quoted 9 lines
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on the channel usage.
Signed-off-by Luiz Augusto von Dentz <[email protected]>---
net/bluetooth/hci_sock.c| 102 ++++++++++++++++++++++++++++++++++-----1 file changed, 91 insertions(+), 11 deletions(-)
so I applied patches 1, 3 and 4 to bluetooth-next tree.
The patch 2 needs a more details review when I have time since I remember there were cases where the SKB copy was really needed.
Regards
Marcel
Luiz Augusto von Dentz
maintainerHi Marcel,
Quoted 8 lines · Marcel Holtmann
Hi Luiz,
Quoted 5 lines
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on the channel usage.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Luiz Augusto von Dentz <[email protected]>---
net/bluetooth/hci_sock.c| 102 ++++++++++++++++++++++++++++++++++-----1 file changed, 91 insertions(+), 11 deletions(-)so I applied patches 1, 3 and 4 to bluetooth-next tree.
The patch 2 needs a more details review when I have time since I remember there were cases where the SKB copy was really needed.
Is that something not covered by CI testing? Note we still have a copy done internally with create_monitor_ctrl_command.
Quoted 4 lines
Regards
Marcel
Signature · 1 line
Luiz Augusto von Dentz
Marcel Holtmann
maintainerHi Luiz,
Quoted 10 lines
Quoted 10 lines
Quoted 9 lines
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on the channel usage.
Signed-off-by Luiz Augusto von Dentz <[email protected]>---
net/bluetooth/hci_sock.c| 102 ++++++++++++++++++++++++++++++++++-----1 file changed, 91 insertions(+), 11 deletions(-)
Quoted 6 lines
Quoted 3 lines
so I applied patches 1, 3 and 4 to bluetooth-next tree.
The patch 2 needs a more details review when I have time since I remember there were cases where the SKB copy was really needed.
Is that something not covered by CI testing? Note we still have a copy done internally with
create_monitor_ctrl_command.
there are cases where the SKB handed down is in hdev->send() and that one is owned by the driver to make whatever modifications to headroom it pleases. So if the stack needs to send it out via other sockets, it needs a copy.
We can optimize here, but need to be careful.
Regards
Marcel
Luiz Augusto von Dentz
maintainerHi Marcel,
Quoted 15 lines · Marcel Holtmann
Hi Luiz,
Quoted 12 lines
Quoted 12 lines
Quoted 9 lines
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on the channel usage.
Signed-off-by Luiz Augusto von Dentz <[email protected]>---
net/bluetooth/hci_sock.c| 102 ++++++++++++++++++++++++++++++++++-----1 file changed, 91 insertions(+), 11 deletions(-)so I applied patches 1, 3 and 4 to bluetooth-next tree.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
The patch 2 needs a more details review when I have time since I remember there were cases where the SKB copy was really needed.
Is that something not covered by CI testing? Note we still have a copy done internally with
create_monitor_ctrl_command.there are cases where the SKB handed down is in
hdev->send()and that one is owned by the driver to make whatever modifications to headroom it pleases. So if the stack needs to send it out via other sockets, it needs a copy.We can optimize here, but need to be careful.
I guess you are referring to instances of hci_send_to_channel, which appears there only one instance that is changed in the diff bellow:
if (chan->channel == HCI_CHANNEL_CONTROL) {- struct sk_buff *skb;
+ struct sk_buff *cmd;
/* Send event to monitor */
- skb = create_monitor_ctrl_command(sk, index, opcode, len,
- buf + sizeof(*hdr));
- if (skb) {
- hci_send_to_channel(HCI_CHANNEL_MONITOR, skb,
+ cmd = create_monitor_ctrl_command(sk, index, opcode, len,
+ skb->data + sizeof(*hdr));
+ if (cmd) {
+ hci_send_to_channel(HCI_CHANNEL_MONITOR, cmd,
HCI_SOCK_TRUSTED, NULL);
- kfree_skb(skb);
+ kfree_skb(cmd);
}
}Ive only changed the variable name since the original code use skb which is now used as the original data instead of buf (extra copy), so nothing has changed in this regard, also running this with KSAN, etc, doesn't seem to produce any traces nor there seems to be anything wrong in btmon either.
Note with this we are eliminating the extra copy on buf:
msg -> skb (new) vs msg-> buf -> skb (old)
Quoted 4 lines
Regards
Marcel
Signature · 1 line
Luiz Augusto von Dentz