hugetlbfs: Extend the definition of hugepages parameter to support node allocation
Subsystems (5)
PATCH v5 1/1 hugetlbfs: Extend the definition of hugepages parameter to support node allocation
We can specify the number of hugepages to allocate at boot. But the hugepages is balanced in all nodes at present. In some scenarios, we only need hugepages in one node. For example: DPDK needs hugepages which are in the same node as NIC. if DPDK needs four hugepages of 1G size in node1 and system has 16 numa nodes. We must reserve 64 hugepages in kernel cmdline. But, only four hugepages are used. The others should be free after boot. If the system memory is low(for example: 64G), it will be an impossible task. So, Extending hugepages parameter to support specifying hugepages at a specific node.
For example add following parameter:
hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
---v4->v5 changes:
- remove BUG_ON in __alloc_bootmem_huge_page.
- add nid parameter in __alloc_bootmem_huge_page to support called in both specific node alloc and normal alloc.
- do normal alloc if architecture can't support node specific alloc.
- return -1 in powerpc version of alloc_bootmem_huge_page when nid is not NUMA_NO_NODE.
--- .../admin-guide/kernel-parameters.txt | 8 +- Documentation/admin-guide/mm/hugetlbpage.rst | 12 +- arch/powerpc/mm/hugetlbpage.c | 8 +- include/linux/hugetlb.h | 5 +- mm/hugetlb.c | 155 ++++++++++++++++-- 5 files changed, 166 insertions(+), 22 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +5 -3
@@ -1588,9 +1588,11 @@ the number of pages of hugepagesz to be allocated. If this is the first HugeTLB parameter on the command line, it specifies the number of pages to allocate for - the default huge page size. See also - Documentation/admin-guide/mm/hugetlbpage.rst. - Format: <integer> + the default huge page size. If using node format, the + number of pages to allocate per-node can be specified. + See also Documentation/admin-guide/mm/hugetlbpage.rst. + Format: <integer> or (node format) + <node>:<integer>[,<node>:<integer>] hugepagesz= [HW] The size of the HugeTLB pages. This is used in
Documentation/admin-guide/mm/hugetlbpage.rst +11 -1
@@ -128,7 +128,9 @@ hugepages implicitly specifies the number of huge pages of default size to allocate. If the number of huge pages of default size is implicitly specified, it can not be overwritten by a hugepagesz,hugepages - parameter pair for the default size. + parameter pair for the default size. This parameter also has a + node format. The node format specifies the number of huge pages + to allocate on specific nodes. For example, on an architecture with 2M default huge page size::
@@ -138,6 +140,14 @@ hugepages indicating that the hugepages=512 parameter is ignored. If a hugepages parameter is preceded by an invalid hugepagesz parameter, it will be ignored. + + Node format example:: + + hugepagesz=2M hugepages=0:1,1:2 + + It will allocate 1 2M hugepage on node0 and 2 2M hugepages on node1. + If the node number is invalid, the parameter will be ignored. + default_hugepagesz Specify the default huge page size. This parameter can only be specified once on the command line. default_hugepagesz can
arch/powerpc/mm/hugetlbpage.c +6 -2
@@ -19,6 +19,7 @@#include <linux/swap.h> #include <linux/swapops.h> #include <linux/kmemleak.h> +#include <linux/numa.h> #include <asm/pgalloc.h> #include <asm/tlb.h> #include <asm/setup.h>
@@ -232,14 +233,17 @@ static int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)#endif -int __init alloc_bootmem_huge_page (struct hstate *h) +int __init alloc_bootmem_huge_page (struct hstate *h,int nid) {#ifdef CONFIG_PPC_BOOK3S_64 +/* Don't support node specific alloc */ +if (nid !=NUMA_NO_NODE ) +return -1 ;if (firmware_has_feature (FW_FEATURE_LPAR ) && !radix_enabled ())return pseries_alloc_bootmem_huge_page (h);#endif -return __alloc_bootmem_huge_page (h); +return __alloc_bootmem_huge_page (h, nid); }#ifndef CONFIG_PPC_BOOK3S_64
include/linux/hugetlb.h +3 -2
@@ -605,6 +605,7 @@ struct hstate {unsigned long nr_overcommit_huge_pages;struct list_head hugepage_activelist;struct list_head hugepage_freelists[MAX_NUMNODES ]; +unsigned int max_huge_pages_node[MAX_NUMNODES ];unsigned int nr_huge_pages_node[MAX_NUMNODES ];unsigned int free_huge_pages_node[MAX_NUMNODES ];unsigned int surplus_huge_pages_node[MAX_NUMNODES ];
@@ -637,8 +638,8 @@ void restore_reserve_on_error(struct hstate *h, struct vm_area_struct *vma, unsigned long address, struct page *page);/* arch callback */ -int __init __alloc_bootmem_huge_page (struct hstate *h); -int __init alloc_bootmem_huge_page (struct hstate *h); +int __init __alloc_bootmem_huge_page (struct hstate *h,int nid); +int __init alloc_bootmem_huge_page (struct hstate *h,int nid);void __init hugetlb_add_hstate (unsigned order);bool __init arch_hugetlb_valid_size (unsigned long size);
mm/hugetlb.c +141 -14
238 lines not on this page · raw message
Signature · 1 line
2.27.0
Mike Rapoport
reviewerQuoted 16 lines · yaozhenguo
We can specify the number of hugepages to allocate at boot. But the hugepages is balanced in all nodes at present. In some scenarios, we only need hugepages in one node. For example: DPDK needs hugepages which are in the same node as NIC. if DPDK needs four hugepages of 1G size in node1 and system has 16 numa nodes. We must reserve 64 hugepages in kernel cmdline. But, only four hugepages are used. The others should be free after boot. If the system memory is low(for example: 64G), it will be an impossible task. So, Extending hugepages parameter to support specifying hugepages at a specific node.
For example add following parameter:hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Signed-off-by yaozhenguo <[email protected]>
Quoted 8 lines
---
v4->v5changes:
- removeBUG_ONin__alloc_bootmem_huge_page.
- add nid parameter in__alloc_bootmem_huge_pageto support called in both specific node alloc and normal alloc.
- do normal alloc if architecture can't support node specific alloc.
- return -1 in powerpc version ofalloc_bootmem_huge_pagewhen nid is notNUMA_NO_NODE.
I think, node format should not be enabled on powerpc. Rather than add a new return value to alloc_bootmem_huge_page() and add complex checks for -1, 0 and 1, it would be simpler to add a new weak function. The default implementation will return true and powerpc will have an override that returns false.
This function can be called during command line parsing and if it returned false the entire per-node allocation path would be disabled.
Quoted 126 lines
--- .../admin-guide/kernel-parameters.txt | 8 +- Documentation/admin-guide/mm/hugetlbpage.rst | 12 +- arch/powerpc/mm/hugetlbpage.c | 8 +- include/linux/hugetlb.h | 5 +- mm/hugetlb.c | 155 ++++++++++++++++-- 5 files changed, 166 insertions(+), 22 deletions(-)Documentation/admin-guide/kernel-parameters.txt +5
-3@@ -1588,9 +1588,11 @@ the number of pages of hugepagesz to be allocated. If this is the first HugeTLB parameter on the command line, it specifies the number of pages to allocate for - the default huge page size. See also - Documentation/admin-guide/mm/hugetlbpage.rst. - Format: <integer> + the default huge page size. If using node format, the + number of pages to allocate per-node can be specified. + See also Documentation/admin-guide/mm/hugetlbpage.rst. + Format: <integer> or (node format) + <node>:<integer>[,<node>:<integer>] hugepagesz= [HW] The size of the HugeTLB pages. This is used inDocumentation/admin-guide/mm/hugetlbpage.rst +11
-1@@ -128,7 +128,9 @@ hugepages implicitly specifies the number of huge pages of default size to allocate. If the number of huge pages of default size is implicitly specified, it can not be overwritten by a hugepagesz,hugepages - parameter pair for the default size. + parameter pair for the default size. This parameter also has a + node format. The node format specifies the number of huge pages + to allocate on specific nodes. For example, on an architecture with 2M default huge page size::@@ -138,6 +140,14 @@ hugepages indicating that the hugepages=512 parameter is ignored. If a hugepages parameter is preceded by an invalid hugepagesz parameter, it will be ignored. + + Node format example:: + + hugepagesz=2M hugepages=0:1,1:2 + + It will allocate 1 2M hugepage on node0 and 2 2M hugepages on node1. + If the node number is invalid, the parameter will be ignored. + default_hugepagesz Specify the default huge page size. This parameter can only be specified once on the command line. default_hugepagesz canarch/powerpc/mm/hugetlbpage.c +6
-2@@ -19,6 +19,7 @@#include <linux/swap.h> #include <linux/swapops.h> #include <linux/kmemleak.h> +#include <linux/numa.h> #include <asm/pgalloc.h> #include <asm/tlb.h> #include <asm/setup.h> @@ -232,14 +233,17 @@ static int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)#endif -int __init alloc_bootmem_huge_page (struct hstate *h) +int __init alloc_bootmem_huge_page (struct hstate *h,int nid) {#ifdef CONFIG_PPC_BOOK3S_64 +/* Don't support node specific alloc */ +if (nid !=NUMA_NO_NODE ) +return -1 ;if (firmware_has_feature (FW_FEATURE_LPAR ) && !radix_enabled ())return pseries_alloc_bootmem_huge_page (h);#endif -return __alloc_bootmem_huge_page (h); +return __alloc_bootmem_huge_page (h, nid); }#ifndef CONFIG_PPC_BOOK3S_64 include/linux/hugetlb.h +3
-2@@ -605,6 +605,7 @@ struct hstate {unsigned long nr_overcommit_huge_pages;struct list_head hugepage_activelist;struct list_head hugepage_freelists[MAX_NUMNODES ]; +unsigned int max_huge_pages_node[MAX_NUMNODES ];unsigned int nr_huge_pages_node[MAX_NUMNODES ];unsigned int free_huge_pages_node[MAX_NUMNODES ];unsigned int surplus_huge_pages_node[MAX_NUMNODES ];@@ -637,8 +638,8 @@ void restore_reserve_on_error(struct hstate *h, struct vm_area_struct *vma, unsigned long address, struct page *page);/* arch callback */ -int __init __alloc_bootmem_huge_page (struct hstate *h); -int __init alloc_bootmem_huge_page (struct hstate *h); +int __init __alloc_bootmem_huge_page (struct hstate *h,int nid); +int __init alloc_bootmem_huge_page (struct hstate *h,int nid);void __init hugetlb_add_hstate (unsigned order);bool __init arch_hugetlb_valid_size (unsigned long size);mm/hugetlb.c +1
-0@@ -66,6 +66,7 @@ static struct hstate * __initdata parsed_hstate;static unsigned long __initdata default_hstate_max_huge_pages;static bool __initdata parsed_valid_hugepagesz = true;static bool __initdata parsed_default_hugepagesz; +static unsigned int default_hugepages_in_node[MAX_NUMNODES ]__initdata ;/* * Protects updates to hugepage_freelists, hugepage_activelist, nr_huge_pages,
mm/hugetlb.c struct page *alloc_huge_page(struct vm_area_struct *vma, · line 2779
Quoted 7 lines
mm/hugetlb.c +2
-2@@ -2774,17 +2775,30 @@ struct page *alloc_huge_page(struct vm_area_struct *vma,vma_end_reservation (h, vma, addr);return ERR_PTR (-ENOSPC ); } - -int alloc_bootmem_huge_page (struct hstate *h) +/* +* Architecture version must provide there own node specific hugepage
^ its
Quoted 11 lines
mm/hugetlb.c +5
-1+* allocation code. If not, please return -1 when nid is not NUMA_NO_NODE. +*/ +int alloc_bootmem_huge_page (struct hstate *h,int nid) __attribute__ ((weak,alias ("__alloc_bootmem_huge_page" ))); -int __alloc_bootmem_huge_page (struct hstate *h) +int __alloc_bootmem_huge_page (struct hstate *h,int nid) {struct huge_bootmem_page *m;int nr_nodes, node; +void *addr =NULL ;
mm/hugetlb.c struct page *alloc_huge_page(struct vm_area_struct *vma, · line 2799
Quoted 10 lines
mm/hugetlb.c +10
-0+/* do node specific alloc */ +if (nid !=NUMA_NO_NODE && nid <nodes_weight (node_states[N_MEMORY ])) { + addr =memblock_alloc_try_nid_raw (huge_page_size (h),huge_page_size (h), +0 ,MEMBLOCK_ALLOC_ACCESSIBLE , nid); +if (addr) { + m = addr; + goto found; + }else { +return 0 ; + }
if (!addr) return 0; m = addr; goto found;
seems simpler to me.
Besides, I think addr is not needed at all, m can be assigned directly. I'd also rename it to e.g. page.
Quoted 86 lines
mm/hugetlb.c +63
-3+ }for_each_node_mask_to_alloc (h, nr_nodes, node, &node_states[N_MEMORY ]) { -void *addr; - addr =memblock_alloc_try_nid_raw (huge_page_size (h),huge_page_size (h),0 ,MEMBLOCK_ALLOC_ACCESSIBLE , node);@@ -2801,7 +2815,6 @@ int __alloc_bootmem_huge_page(struct hstate *h)return 0 ; found: -BUG_ON (!IS_ALIGNED (virt_to_phys (m),huge_page_size (h)));/* Put them into a private list first because mem_map is not up yet */ INIT_LIST_HEAD (&m->list);list_add (&m->list, &huge_boot_pages);@@ -2841,11 +2854,83 @@ static void __init gather_bootmem_prealloc(void)cond_resched (); } } +/* +* do node specific hugepage allocation +* return 0: allocation is failed +* 1: allocation is successful +* -1: alloc_bootmem_huge_page can't support node specific allocation +*/ +static int __init hugetlb_hstate_alloc_pages_onenode (struct hstate *h,int nid) +{ +unsigned long i; +char buf[32 ]; +int ret =1 ; + +for (i =0 ; i < h->max_huge_pages_node[nid]; ++i) { +if (hstate_is_gigantic (h)) { + ret =alloc_bootmem_huge_page (h, nid); +if (ret ==0 || ret ==-1 ) +break ; + }else { +struct page *page; +gfp_t gfp_mask =htlb_alloc_mask (h) | __GFP_THISNODE; + + page =alloc_fresh_huge_page (h, gfp_mask, nid, + &node_states[N_MEMORY ],NULL ); +if (!page) { + ret =0 ; +break ; + } +put_page (page);/* free it into the hugepage allocator */ + } +cond_resched (); + } +if (i == h->max_huge_pages_node[nid]) +return ret; + +string_get_size (huge_page_size (h),1 ,STRING_UNITS_2 , buf,32 ); +pr_warn ("HugeTLB: allocating %u of page size %s failed node%d. Only allocated %lu hugepages.\n" , + h->max_huge_pages_node[nid], buf, nid, i); +/* +* we need h->max_huge_pages to do normal alloc, +* when alloc_bootm_huge_page can't support node specific allocation. +*/ +if (ret !=-1 ) + h->max_huge_pages -= (h->max_huge_pages_node[nid] - i); + h->max_huge_pages_node[nid] = i; +return ret; +}static void __init hugetlb_hstate_alloc_pages (struct hstate *h) {unsigned long i;nodemask_t *node_alloc_noretry; +bool hugetlb_node_set = false; + +/* skip gigantic hugepages allocation if hugetlb_cma enabled */ +if (hstate_is_gigantic (h) && hugetlb_cma_size) { +pr_warn_once ("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n" ); +return ; + } + +/* do node alloc */ +for (i =0 ; i <nodes_weight (node_states[N_MEMORY ]); i++) { +if (h->max_huge_pages_node[i] >0 ) { +/* +* if hugetlb_hstate_alloc_pages_onenode return -1 +* architecture version alloc_bootmem_huge_page +* can't support node specific alloc for gigantic +* hugepage, so goto normal alloc.
mm/hugetlb.c static void __init gather_bootmem_prealloc(void) · line 2933
Quoted 10 lines
mm/hugetlb.c +10
-0+*/ +if (hugetlb_hstate_alloc_pages_onenode (h, i) ==-1 ) +pr_warn_once ("HugeTLB: architecture can't support node specific alloc, skip!\n" ); +else + hugetlb_node_set = true; + } + } + +if (hugetlb_node_set) +return ;
If I understand correctly, this means that even if the allocation fails for some of the nodes explicitly set in hugepages=nid:pages,..., we won't try allocate more huge pages and silently ignore the failure. Is this the intended behaviour?
Quoted 24 lines
mm/hugetlb.c +1
-6if (!hstate_is_gigantic (h)) {/* @@ -2867,11 +2952,7 @@ static void __init hugetlb_hstate_alloc_pages(struct hstate *h) for (i = 0; i < h->max_huge_pages; ++i) { if (hstate_is_gigantic(h)) { - if (hugetlb_cma_size) { - pr_warn_once("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n"); - goto free; - } - if (!alloc_bootmem_huge_page(h)) + if (!alloc_bootmem_huge_page(h, NUMA_NO_NODE)) break; } else if (!alloc_pool_huge_page(h, &node_states[N_MEMORY],@@ -2887,7 +2968,6 @@ static void __init hugetlb_hstate_alloc_pages(struct hstate *h) h->max_huge_pages, buf, i); h->max_huge_pages = i; } -free:kfree (node_alloc_noretry); }
Signature · 2 lines
Sincerely yours, Mike.
Thanks for your review.
Quoted 27 lines · Mike Rapoport <[email protected]> 于2021年9月19日周日 上午3:28写道:
Quoted 16 lines · yaozhenguo
We can specify the number of hugepages to allocate at boot. But the hugepages is balanced in all nodes at present. In some scenarios, we only need hugepages in one node. For example: DPDK needs hugepages which are in the same node as NIC. if DPDK needs four hugepages of 1G size in node1 and system has 16 numa nodes. We must reserve 64 hugepages in kernel cmdline. But, only four hugepages are used. The others should be free after boot. If the system memory is low(for example: 64G), it will be an impossible task. So, Extending hugepages parameter to support specifying hugepages at a specific node.
For example add following parameter:hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Signed-off-by yaozhenguo <[email protected]>Quoted 8 lines
---
v4->v5changes:
- removeBUG_ONin__alloc_bootmem_huge_page.
- add nid parameter in__alloc_bootmem_huge_pageto support called in both specific node alloc and normal alloc.
- do normal alloc if architecture can't support node specific alloc.
- return -1 in powerpc version ofalloc_bootmem_huge_pagewhen nid is notNUMA_NO_NODE.
Quoted 8 lines
I think, node format should not be enabled on powerpc. Rather than add a new return value to
alloc_bootmem_huge_page()and add complex checks for -1, 0 and 1, it would be simpler to add a new weak function. The default implementation will return true and powerpc will have an override that returns false.
This function can be called during command line parsing and if it returned false the entire per-node allocation path would be disabled.
Seems more clearly and simpler. I will change it.
Quoted 163 lines
Quoted 126 lines
--- .../admin-guide/kernel-parameters.txt | 8 +- Documentation/admin-guide/mm/hugetlbpage.rst | 12 +- arch/powerpc/mm/hugetlbpage.c | 8 +- include/linux/hugetlb.h | 5 +- mm/hugetlb.c | 155 ++++++++++++++++-- 5 files changed, 166 insertions(+), 22 deletions(-)Documentation/admin-guide/kernel-parameters.txt +5
-3@@ -1588,9 +1588,11 @@ the number of pages of hugepagesz to be allocated. If this is the first HugeTLB parameter on the command line, it specifies the number of pages to allocate for - the default huge page size. See also - Documentation/admin-guide/mm/hugetlbpage.rst. - Format: <integer> + the default huge page size. If using node format, the + number of pages to allocate per-node can be specified. + See also Documentation/admin-guide/mm/hugetlbpage.rst. + Format: <integer> or (node format) + <node>:<integer>[,<node>:<integer>] hugepagesz= [HW] The size of the HugeTLB pages. This is used inDocumentation/admin-guide/mm/hugetlbpage.rst +11
-1@@ -128,7 +128,9 @@ hugepages implicitly specifies the number of huge pages of default size to allocate. If the number of huge pages of default size is implicitly specified, it can not be overwritten by a hugepagesz,hugepages - parameter pair for the default size. + parameter pair for the default size. This parameter also has a + node format. The node format specifies the number of huge pages + to allocate on specific nodes. For example, on an architecture with 2M default huge page size::@@ -138,6 +140,14 @@ hugepages indicating that the hugepages=512 parameter is ignored. If a hugepages parameter is preceded by an invalid hugepagesz parameter, it will be ignored. + + Node format example:: + + hugepagesz=2M hugepages=0:1,1:2 + + It will allocate 1 2M hugepage on node0 and 2 2M hugepages on node1. + If the node number is invalid, the parameter will be ignored. + default_hugepagesz Specify the default huge page size. This parameter can only be specified once on the command line. default_hugepagesz canarch/powerpc/mm/hugetlbpage.c +6
-2@@ -19,6 +19,7 @@#include <linux/swap.h> #include <linux/swapops.h> #include <linux/kmemleak.h> +#include <linux/numa.h> #include <asm/pgalloc.h> #include <asm/tlb.h> #include <asm/setup.h> @@ -232,14 +233,17 @@ static int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)#endif -int __init alloc_bootmem_huge_page (struct hstate *h) +int __init alloc_bootmem_huge_page (struct hstate *h,int nid) {#ifdef CONFIG_PPC_BOOK3S_64 +/* Don't support node specific alloc */ +if (nid !=NUMA_NO_NODE ) +return -1 ;if (firmware_has_feature (FW_FEATURE_LPAR ) && !radix_enabled ())return pseries_alloc_bootmem_huge_page (h);#endif -return __alloc_bootmem_huge_page (h); +return __alloc_bootmem_huge_page (h, nid); }#ifndef CONFIG_PPC_BOOK3S_64 include/linux/hugetlb.h +3
-2@@ -605,6 +605,7 @@ struct hstate {unsigned long nr_overcommit_huge_pages;struct list_head hugepage_activelist;struct list_head hugepage_freelists[MAX_NUMNODES ]; +unsigned int max_huge_pages_node[MAX_NUMNODES ];unsigned int nr_huge_pages_node[MAX_NUMNODES ];unsigned int free_huge_pages_node[MAX_NUMNODES ];unsigned int surplus_huge_pages_node[MAX_NUMNODES ];@@ -637,8 +638,8 @@ void restore_reserve_on_error(struct hstate *h, struct vm_area_struct *vma, unsigned long address, struct page *page);/* arch callback */ -int __init __alloc_bootmem_huge_page (struct hstate *h); -int __init alloc_bootmem_huge_page (struct hstate *h); +int __init __alloc_bootmem_huge_page (struct hstate *h,int nid); +int __init alloc_bootmem_huge_page (struct hstate *h,int nid);void __init hugetlb_add_hstate (unsigned order);bool __init arch_hugetlb_valid_size (unsigned long size);mm/hugetlb.c +1
-0@@ -66,6 +66,7 @@ static struct hstate * __initdata parsed_hstate;static unsigned long __initdata default_hstate_max_huge_pages;static bool __initdata parsed_valid_hugepagesz = true;static bool __initdata parsed_default_hugepagesz; +static unsigned int default_hugepages_in_node[MAX_NUMNODES ]__initdata ;/* * Protects updates to hugepage_freelists, hugepage_activelist, nr_huge_pages, mm/hugetlb.c struct page *alloc_huge_page(struct vm_area_struct *vma, · line 2779
Quoted 7 lines
mm/hugetlb.c +2
-2@@ -2774,17 +2775,30 @@ struct page *alloc_huge_page(struct vm_area_struct *vma,vma_end_reservation (h, vma, addr);return ERR_PTR (-ENOSPC ); } - -int alloc_bootmem_huge_page (struct hstate *h) +/* +* Architecture version must provide there own node specific hugepage ^ its
Quoted 11 lines
mm/hugetlb.c +5
-1+* allocation code. If not, please return -1 when nid is not NUMA_NO_NODE. +*/ +int alloc_bootmem_huge_page (struct hstate *h,int nid) __attribute__ ((weak,alias ("__alloc_bootmem_huge_page" ))); -int __alloc_bootmem_huge_page (struct hstate *h) +int __alloc_bootmem_huge_page (struct hstate *h,int nid) {struct huge_bootmem_page *m;int nr_nodes, node; +void *addr =NULL ;mm/hugetlb.c struct page *alloc_huge_page(struct vm_area_struct *vma, · line 2799
Quoted 10 lines
mm/hugetlb.c +10
-0+/* do node specific alloc */ +if (nid !=NUMA_NO_NODE && nid <nodes_weight (node_states[N_MEMORY ])) { + addr =memblock_alloc_try_nid_raw (huge_page_size (h),huge_page_size (h), +0 ,MEMBLOCK_ALLOC_ACCESSIBLE , nid); +if (addr) { + m = addr; + goto found; + }else { +return 0 ; + }if (!addr) return 0; m = addr; goto found;
Quoted 5 lines
seems simpler to me.
Besides, I think addr is not needed at all, m can be assigned directly. I'd also rename it to e.g. page.
Yes, addr seems useless. I will remove it.
Quoted 93 lines
Quoted 93 lines
mm/hugetlb.c +70
-3+ }for_each_node_mask_to_alloc (h, nr_nodes, node, &node_states[N_MEMORY ]) { -void *addr; - addr =memblock_alloc_try_nid_raw (huge_page_size (h),huge_page_size (h),0 ,MEMBLOCK_ALLOC_ACCESSIBLE , node);@@ -2801,7 +2815,6 @@ int __alloc_bootmem_huge_page(struct hstate *h)return 0 ; found: -BUG_ON (!IS_ALIGNED (virt_to_phys (m),huge_page_size (h)));/* Put them into a private list first because mem_map is not up yet */ INIT_LIST_HEAD (&m->list);list_add (&m->list, &huge_boot_pages);@@ -2841,11 +2854,83 @@ static void __init gather_bootmem_prealloc(void)cond_resched (); } } +/* +* do node specific hugepage allocation +* return 0: allocation is failed +* 1: allocation is successful +* -1: alloc_bootmem_huge_page can't support node specific allocation +*/ +static int __init hugetlb_hstate_alloc_pages_onenode (struct hstate *h,int nid) +{ +unsigned long i; +char buf[32 ]; +int ret =1 ; + +for (i =0 ; i < h->max_huge_pages_node[nid]; ++i) { +if (hstate_is_gigantic (h)) { + ret =alloc_bootmem_huge_page (h, nid); +if (ret ==0 || ret ==-1 ) +break ; + }else { +struct page *page; +gfp_t gfp_mask =htlb_alloc_mask (h) | __GFP_THISNODE; + + page =alloc_fresh_huge_page (h, gfp_mask, nid, + &node_states[N_MEMORY ],NULL ); +if (!page) { + ret =0 ; +break ; + } +put_page (page);/* free it into the hugepage allocator */ + } +cond_resched (); + } +if (i == h->max_huge_pages_node[nid]) +return ret; + +string_get_size (huge_page_size (h),1 ,STRING_UNITS_2 , buf,32 ); +pr_warn ("HugeTLB: allocating %u of page size %s failed node%d. Only allocated %lu hugepages.\n" , + h->max_huge_pages_node[nid], buf, nid, i); +/* +* we need h->max_huge_pages to do normal alloc, +* when alloc_bootm_huge_page can't support node specific allocation. +*/ +if (ret !=-1 ) + h->max_huge_pages -= (h->max_huge_pages_node[nid] - i); + h->max_huge_pages_node[nid] = i; +return ret; +}static void __init hugetlb_hstate_alloc_pages (struct hstate *h) {unsigned long i;nodemask_t *node_alloc_noretry; +bool hugetlb_node_set = false; + +/* skip gigantic hugepages allocation if hugetlb_cma enabled */ +if (hstate_is_gigantic (h) && hugetlb_cma_size) { +pr_warn_once ("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n" ); +return ; + } + +/* do node alloc */ +for (i =0 ; i <nodes_weight (node_states[N_MEMORY ]); i++) { +if (h->max_huge_pages_node[i] >0 ) { +/* +* if hugetlb_hstate_alloc_pages_onenode return -1 +* architecture version alloc_bootmem_huge_page +* can't support node specific alloc for gigantic +* hugepage, so goto normal alloc. +*/ +if (hugetlb_hstate_alloc_pages_onenode (h, i) ==-1 ) +pr_warn_once ("HugeTLB: architecture can't support node specific alloc, skip!\n" ); +else + hugetlb_node_set = true; + } + }
Quoted 9 lines
mm/hugetlb.c static void __init gather_bootmem_prealloc(void) · line 2933
Quoted 3 lines
mm/hugetlb.c +3
-0+ +if (hugetlb_node_set) +return ;If I understand correctly, this means that even if the allocation fails for some of the nodes explicitly set in hugepages=nid:pages,..., we won't try allocate more huge pages and silently ignore the failure. Is this the intended behaviour?
Yes, If the allocation is failed in some specific nodes. We just print warning messages
in hugetlb_hstate_alloc_pages_onenode to remind the user to use appropriate hugepages
parameters or check the system and do not try to allocate more huge pages.
hugetlb_node_set is used here to judge whether it is node specific alloc in this “hstate”.
If it is a node specific allocation for this “hstate”, we should not do old path(bellow code)
allocation whether the node specific allocation is successful or not.
Quoted 28 lines
Quoted 17 lines
mm/hugetlb.c +1
-5if (!hstate_is_gigantic (h)) {/* @@ -2867,11 +2952,7 @@ static void __init hugetlb_hstate_alloc_pages(struct hstate *h) for (i = 0; i < h->max_huge_pages; ++i) { if (hstate_is_gigantic(h)) { - if (hugetlb_cma_size) { - pr_warn_once("HugeTLB: hugetlb_cma is enabled, skip boot time allocation\n"); - goto free; - } - if (!alloc_bootmem_huge_page(h)) + if (!alloc_bootmem_huge_page(h, NUMA_NO_NODE)) break; } else if (!alloc_pool_huge_page(h, &node_states[N_MEMORY],mm/hugetlb.c static void __init hugetlb_hstate_alloc_pages(struct hstate *h) · line 2973
Quoted 7 lines
mm/hugetlb.c +0
-1@@ -2887,7 +2968,6 @@ static void __init hugetlb_hstate_alloc_pages(struct hstate *h) h->max_huge_pages, buf, i); h->max_huge_pages = i; } -free:kfree (node_alloc_noretry); }--
Sincerely yours,
Mike.