arm64: dts: imx8mq-reform2: add uSDHC2 CD pinctrl
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mq-reform2: add uSDHC2 CD pinctrl
The SD card slot on the Reform 2 uses the card detect pad routed to the uSDHC2 module as intended. This is currently working as it is the default mux setting for this pad, but better be explicit and add it to the pinctrl node.
Signed-off-by Lucas Stach <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +1 -0
@@ -202,6 +202,7 @@ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 pinctrl_usdhc2: usdhc2grp { fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
Signature · 7 lines
2.31.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 6 lines · Lucas Stach
The SD card slot on the Reform 2 uses the card detect pad routed to the uSDHC2 module as intended. This is currently working as it is the default mux setting for this pad, but better be explicit and add it to the pinctrl node.
Signed-off-by Lucas Stach <[email protected]>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel