net/ixgbe: Add support for Windows
Subsystems (3)
PATCH 1/1 net/ixgbe: Add support for Windows
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev. I tested on AWS using ixgbe VF device, using dpdk-testpmd.
--- drivers/net/ixgbe/base/ixgbe_hv_vf.c | 1 + drivers/net/ixgbe/base/ixgbe_osdep.h | 10 ++++++++++ drivers/net/ixgbe/ixgbe_ethdev.c | 2 +- drivers/net/ixgbe/ixgbe_flow.c | 2 +- drivers/net/ixgbe/ixgbe_tm.c | 2 +- drivers/net/ixgbe/meson.build | 6 ------ lib/cryptodev/rte_cryptodev.c | 4 ++++ lib/cryptodev/version.map | 2 -- lib/meson.build | 2 ++ lib/security/rte_security.h | 4 ++++ lib/security/version.map | 1 - 11 files changed, 24 insertions(+), 12 deletions(-)
drivers/net/ixgbe/base/ixgbe_hv_vf.c +1 -0
@@ -4,6 +4,7 @@#include "ixgbe_vf.h" #include "ixgbe_hv_vf.h" +#include "ixgbe_osdep.h" /** * Hyper-V variant - just a stub.
drivers/net/ixgbe/base/ixgbe_osdep.h +10 -0
@@ -17,6 +17,12 @@#include <rte_byteorder.h> #include <rte_io.h> +#ifndef RTE_EXEC_ENV_WINDOWS +#include <netinet/in.h> +#else +#include <Ws2tcpip.h> +#endif +#include "../ixgbe_logs.h" #include "../ixgbe_bypass_defines.h"
@@ -43,12 +49,16 @@#define false 0#define true 1 +#ifndef RTE_EXEC_ENV_WINDOWS #define min (a,b) RTE_MIN(a,b) +#endif #define EWARN(hw, S, args...) DEBUGOUT1(S, ##args)/* Bunch of defines for shared code bogosity */ +#ifndef UNREFERENCED_PARAMETER #define UNREFERENCED_PARAMETER (_p) +#endif#define UNREFERENCED_1PARAMETER (_p) #define UNREFERENCED_2PARAMETER(_p, _q)#define UNREFERENCED_3PARAMETER (_p, _q, _r)
drivers/net/ixgbe/ixgbe_ethdev.c +1 -1
@@ -10,7 +10,6 @@#include <unistd.h> #include <stdarg.h> #include <inttypes.h> -#include <netinet/in.h> #include <rte_string_fns.h> #include <rte_byteorder.h> #include <rte_common.h>
@@ -46,6 +45,7 @@#include "ixgbe_rxtx.h" #include "base/ixgbe_type.h" #include "base/ixgbe_phy.h" +#include "base/ixgbe_osdep.h" #include "ixgbe_regs.h" /*
drivers/net/ixgbe/ixgbe_flow.c +1 -1
@@ -10,7 +10,6 @@#include <unistd.h> #include <stdarg.h> #include <inttypes.h> -#include <netinet/in.h> #include <rte_byteorder.h> #include <rte_common.h> #include <rte_cycles.h>
@@ -37,6 +36,7 @@#include "base/ixgbe_api.h" #include "base/ixgbe_vf.h" #include "base/ixgbe_common.h" +#include "base/ixgbe_osdep.h" #include "ixgbe_ethdev.h" #include "ixgbe_bypass.h" #include "ixgbe_rxtx.h"
drivers/net/ixgbe/ixgbe_tm.c +1 -1
@@ -665,7 +665,7 @@ ixgbe_node_add(struct rte_eth_dev *dev, uint32_t node_id, }/* check level */ if (level_id !=RTE_TM_NODE_LEVEL_ID_ANY && - level_id != parent_node_type +1 ) { + level_id != (uint32_t )parent_node_type +1 ) { error->type =RTE_TM_ERROR_TYPE_NODE_PARAMS ; error->message ="Wrong level" ;return -EINVAL ;
drivers/net/ixgbe/meson.build +0 -6
@@ -1,12 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -if is_windows - build = false - reason = 'not supported on Windows' - subdir_done() -endif - cflags += ['-DRTE_LIBRTE_IXGBE_BYPASS'] subdir('base')
lib/cryptodev/rte_cryptodev.c +4 -0
@@ -12,7 +12,11 @@#include <errno.h> #include <stdint.h> #include <inttypes.h> +#ifndef RTE_EXEC_ENV_WINDOWS #include <netinet/in.h> +#else +#include <Ws2tcpip.h> +#endif #include <rte_byteorder.h> #include <rte_log.h>
lib/cryptodev/version.map +0 -2
@@ -93,10 +93,8 @@ EXPERIMENTAL { # added in 20.11 rte_cryptodev_configure_raw_dp_ctx; rte_cryptodev_get_raw_dp_ctx_size; - rte_cryptodev_raw_dequeue; rte_cryptodev_raw_dequeue_burst; rte_cryptodev_raw_dequeue_done; - rte_cryptodev_raw_enqueue; rte_cryptodev_raw_enqueue_burst; rte_cryptodev_raw_enqueue_done;
lib/meson.build +2 -0
@@ -85,6 +85,8 @@ if is_windows 'gso', 'latencystats', 'pdump', + 'cryptodev', + 'security', ] # only supported libraries for windows endif
lib/security/rte_security.h +4 -0
@@ -19,9 +19,13 @@ extern "C" {#include <sys/types.h> +#ifndef RTE_EXEC_ENV_WINDOWS #include <netinet/in.h> #include <netinet/ip.h> #include <netinet/ip6.h> +#else +#include <Ws2tcpip.h> +#endif #include <rte_compat.h> #include <rte_common.h>
lib/security/version.map +0 -1
@@ -1,7 +1,6 @@ DPDK_22 { global: - rte_security_attach_session; rte_security_capabilities_get; rte_security_capability_get; rte_security_session_create;
Signature · 1 line
2.30.2
2021-09-15 18:44 (UTC+0000), William Tu:
Quoted 2 lines
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev.
Tal Shnaiderman posted patches for cryptodev and security today, so I won't comment on that part. IMO your patch should depend on them
(https://doc.dpdk.org/guides/contributing/patches.html#patch-dependencies).
[...]
Quoted 5 lines
drivers/net/ixgbe/base/ixgbe_osdep.h +0
-0
drivers/net/ixgbe/base/ixgbe_osdep.h line 25
Quoted 9 lines
drivers/net/ixgbe/base/ixgbe_osdep.h +6
-0@@ -17,6 +17,12 @@#include <rte_byteorder.h> #include <rte_io.h> +#ifndef RTE_EXEC_ENV_WINDOWS +#include <netinet/in.h> +#else +#include <Ws2tcpip.h> +#endif +
#include <rte_ip.h> instead.
Quoted 18 lines · Dmitry Kozlyuk
2021-09-15 18:44 (UTC+0000), William Tu:
Quoted 2 lines
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev.
Tal Shnaiderman posted patches for cryptodev and security today, so I won't comment on that part. IMO your patch should depend on them
(https://doc.dpdk.org/guides/contributing/patches.html#patch-dependencies).[...]
Quoted 8 lines
drivers/net/ixgbe/base/ixgbe_osdep.h +0
-0@@ -17,6 +17,12 @@#include <rte_byteorder.h> #include <rte_io.h>
Quoted 8 lines
drivers/net/ixgbe/base/ixgbe_osdep.h line 25
Quoted 6 lines
drivers/net/ixgbe/base/ixgbe_osdep.h +6
-0+#ifndef RTE_EXEC_ENV_WINDOWS +#include <netinet/in.h> +#else +#include <Ws2tcpip.h> +#endif +#include <
rte_ip.h> instead.
Hi Dmitry,
Thanks for your feedback.
I will send v2.
William
Quoted 9 lines · Dmitry Kozlyuk
2021-09-15 18:44 (UTC+0000), William Tu:
Quoted 2 lines
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev.
Tal Shnaiderman posted patches for cryptodev and security today, so I won't comment on that part. IMO your patch should depend on them
(https://doc.dpdk.org/guides/contributing/patches.html#patch-dependencies).
Hi Dmitry,
I checked Tal's patch and actually there is no dependency. Tal's patch is at driver/crypto,
https://inbox.dpdk.org/dev/[email protected]/T/
and this patch is enabling lib/cryptodev and lib/security
I will send v2 by breaking the ixgbe part and lib/security and cryptodev part. Thanks,
William
2021-09-18 07:24 (UTC-0700), William Tu:
Quoted 14 lines
Quoted 9 lines · Dmitry Kozlyuk
2021-09-15 18:44 (UTC+0000), William Tu:
Quoted 2 lines
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev.
Tal Shnaiderman posted patches for cryptodev and security today, so I won't comment on that part. IMO your patch should depend on them
(https://doc.dpdk.org/guides/contributing/patches.html#patch-dependencies).Hi Dmitry,
Quoted 8 lines
I checked Tal's patch and actually there is no dependency. Tal's patch is at driver/crypto,
https://inbox.dpdk.org/dev/[email protected]/T/
and this patch is enabling lib/cryptodev and lib/securityI will send v2 by breaking the ixgbe part and lib/security and cryptodev part. Thanks,
William
Hi William,
I meant these patches, not the patchset you linked:
1. Security: http://patchwork.dpdk.org/project/dpdk/list/?series=18943
2. Cryptodev: http://patchwork.dpdk.org/project/dpdk/list/?series=18880
Quoted 25 lines · Dmitry Kozlyuk
2021-09-18 07:24 (UTC-0700), William Tu:
Quoted 14 lines
Quoted 9 lines · Dmitry Kozlyuk
2021-09-15 18:44 (UTC+0000), William Tu:
Quoted 2 lines
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev.
Tal Shnaiderman posted patches for cryptodev and security today, so I won't comment on that part. IMO your patch should depend on them
(https://doc.dpdk.org/guides/contributing/patches.html#patch-dependencies).Hi Dmitry,
Quoted 8 lines
I checked Tal's patch and actually there is no dependency. Tal's patch is at driver/crypto,
https://inbox.dpdk.org/dev/[email protected]/T/
and this patch is enabling lib/cryptodev and lib/securityI will send v2 by breaking the ixgbe part and lib/security and cryptodev part. Thanks,
William
Quoted 6 lines
Hi William,
I meant these patches, not the patchset you linked:
1. Security: http://patchwork.dpdk.org/project/dpdk/list/?series=18943
2. Cryptodev: http://patchwork.dpdk.org/project/dpdk/list/?series=18880
You're right! Thank you
William
PATCH v2 1/1 net/ixgbe: Add support for Windows
In reply to William TuThis patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev. I tested on AWS using Intel Corporation 82599 Ethernet Controller Virtual Function [8086:10ed], using dpdk-testpmd.
---
Depends-on: series-18880 ("cryptodev: build on Windows")
Depends-on: series-18943 ("security: use the net library for IP structs")
v2:
* add dependencies on cryptodev and security
* add #include <rte_ip.h>, instead of doing
#ifndef RTE_EXEC_ENV_WINDOWS
#include <netinet/in.h>
#else
#include <Ws2tcpip.h>
#endif
however, including rte_ip.h requires including another
set of dependent headers, see the
drivers/net/ixgbe/base/meson.build
---
drivers/net/ixgbe/base/ixgbe_hv_vf.c | 1 +
drivers/net/ixgbe/base/ixgbe_osdep.h | 5 +++++
drivers/net/ixgbe/base/meson.build | 7 +++++++
drivers/net/ixgbe/ixgbe_ethdev.c | 2 +-
drivers/net/ixgbe/ixgbe_flow.c | 2 +-
drivers/net/ixgbe/ixgbe_tm.c | 2 +-
drivers/net/ixgbe/meson.build | 6 ------
7 files changed, 16 insertions(+), 9 deletions(-)drivers/net/ixgbe/base/ixgbe_hv_vf.c +1 -0
@@ -4,6 +4,7 @@#include "ixgbe_vf.h" #include "ixgbe_hv_vf.h" +#include "ixgbe_osdep.h" /** * Hyper-V variant - just a stub.
drivers/net/ixgbe/base/ixgbe_osdep.h +5 -0
@@ -16,6 +16,7 @@#include <rte_log.h> #include <rte_byteorder.h> #include <rte_io.h> +#include <rte_ip.h> #include "../ixgbe_logs.h" #include "../ixgbe_bypass_defines.h"
@@ -43,12 +44,16 @@#define false 0#define true 1 +#ifndef RTE_EXEC_ENV_WINDOWS #define min (a,b) RTE_MIN(a,b) +#endif #define EWARN(hw, S, args...) DEBUGOUT1(S, ##args)/* Bunch of defines for shared code bogosity */ +#ifndef UNREFERENCED_PARAMETER #define UNREFERENCED_PARAMETER (_p) +#endif#define UNREFERENCED_1PARAMETER (_p) #define UNREFERENCED_2PARAMETER(_p, _q)#define UNREFERENCED_3PARAMETER (_p, _q, _r)
drivers/net/ixgbe/base/meson.build +7 -0
@@ -28,7 +28,14 @@ foreach flag: error_cflags endif endforeach +inc = [] +inc += include_directories('../../../../lib/net') +inc += include_directories('../../../../lib/mbuf') +inc += include_directories('../../../../lib/mempool') +inc += include_directories('../../../../lib/ring') + base_lib = static_library('ixgbe_base', sources, dependencies: static_rte_eal, + include_directories: inc, c_args: c_args) base_objs = base_lib.extract_all_objects(recursive: true)
drivers/net/ixgbe/ixgbe_ethdev.c +1 -1
@@ -10,7 +10,6 @@#include <unistd.h> #include <stdarg.h> #include <inttypes.h> -#include <netinet/in.h> #include <rte_string_fns.h> #include <rte_byteorder.h> #include <rte_common.h>
@@ -46,6 +45,7 @@#include "ixgbe_rxtx.h" #include "base/ixgbe_type.h" #include "base/ixgbe_phy.h" +#include "base/ixgbe_osdep.h" #include "ixgbe_regs.h" /*
drivers/net/ixgbe/ixgbe_flow.c +1 -1
@@ -10,7 +10,6 @@#include <unistd.h> #include <stdarg.h> #include <inttypes.h> -#include <netinet/in.h> #include <rte_byteorder.h> #include <rte_common.h> #include <rte_cycles.h>
@@ -37,6 +36,7 @@#include "base/ixgbe_api.h" #include "base/ixgbe_vf.h" #include "base/ixgbe_common.h" +#include "base/ixgbe_osdep.h" #include "ixgbe_ethdev.h" #include "ixgbe_bypass.h" #include "ixgbe_rxtx.h"
drivers/net/ixgbe/ixgbe_tm.c +1 -1
@@ -665,7 +665,7 @@ ixgbe_node_add(struct rte_eth_dev *dev, uint32_t node_id, }/* check level */ if (level_id !=RTE_TM_NODE_LEVEL_ID_ANY && - level_id != parent_node_type +1 ) { + level_id != (uint32_t )parent_node_type +1 ) { error->type =RTE_TM_ERROR_TYPE_NODE_PARAMS ; error->message ="Wrong level" ;return -EINVAL ;
drivers/net/ixgbe/meson.build +0 -6
@@ -1,12 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -if is_windows - build = false - reason = 'not supported on Windows' - subdir_done() -endif - cflags += ['-DRTE_LIBRTE_IXGBE_BYPASS'] subdir('base')
Signature · 1 line
2.30.2
I forgot to add the CC list.
Quoted 165 lines · William Tu
This patch enables building the ixgbe driver for Windows. It also enables its dependencies on security and cryptodev. I tested on AWS using Intel Corporation 82599 Ethernet Controller Virtual Function [8086:10ed], using dpdk-testpmd.
Signed-off-by William Tu <[email protected]>---
Depends-on: series-18880 ("cryptodev: build on Windows")
Depends-on: series-18943 ("security: use the net library for IP structs")v2:
* add dependencies on cryptodev and security
* add #include <rte_ip.h>, instead of doing#ifndef RTE_EXEC_ENV_WINDOWS #include <netinet/in.h> #else #include <Ws2tcpip.h> #endif however, including rte_ip.h requires including another set of dependent headers, see the drivers/net/ixgbe/base/meson.build --- drivers/net/ixgbe/base/ixgbe_hv_vf.c | 1 + drivers/net/ixgbe/base/ixgbe_osdep.h | 5 +++++ drivers/net/ixgbe/base/meson.build | 7 +++++++ drivers/net/ixgbe/ixgbe_ethdev.c | 2 +- drivers/net/ixgbe/ixgbe_flow.c | 2 +- drivers/net/ixgbe/ixgbe_tm.c | 2 +- drivers/net/ixgbe/meson.build | 6 ------ 7 files changed, 16 insertions(+), 9 deletions(-)drivers/net/ixgbe/base/ixgbe_hv_vf.c +1
-0@@ -4,6 +4,7 @@#include "ixgbe_vf.h" #include "ixgbe_hv_vf.h" +#include "ixgbe_osdep.h" /** * Hyper-V variant - just a stub. drivers/net/ixgbe/base/ixgbe_osdep.h +5
-0@@ -16,6 +16,7 @@#include <rte_log.h> #include <rte_byteorder.h> #include <rte_io.h> +#include <rte_ip.h> #include "../ixgbe_logs.h" #include "../ixgbe_bypass_defines.h" @@ -43,12 +44,16 @@#define false 0#define true 1 +#ifndef RTE_EXEC_ENV_WINDOWS #define min (a,b) RTE_MIN(a,b) +#endif #define EWARN(hw, S, args...) DEBUGOUT1(S, ##args)/* Bunch of defines for shared code bogosity */ +#ifndef UNREFERENCED_PARAMETER #define UNREFERENCED_PARAMETER (_p) +#endif #define UNREFERENCED_1PARAMETER (_p)#define UNREFERENCED_2PARAMETER (_p, _q)#define UNREFERENCED_3PARAMETER (_p, _q, _r)drivers/net/ixgbe/base/meson.build +7
-0@@ -28,7 +28,14 @@ foreach flag: error_cflags endif endforeach +inc = [] +inc += include_directories('../../../../lib/net') +inc += include_directories('../../../../lib/mbuf') +inc += include_directories('../../../../lib/mempool') +inc += include_directories('../../../../lib/ring') + base_lib = static_library('ixgbe_base', sources, dependencies: static_rte_eal, + include_directories: inc, c_args: c_args) base_objs = base_lib.extract_all_objects(recursive: true)drivers/net/ixgbe/ixgbe_ethdev.c +1
-1@@ -10,7 +10,6 @@#include <unistd.h> #include <stdarg.h> #include <inttypes.h> -#include <netinet/in.h> #include <rte_string_fns.h> #include <rte_byteorder.h> #include <rte_common.h> @@ -46,6 +45,7 @@#include "ixgbe_rxtx.h" #include "base/ixgbe_type.h" #include "base/ixgbe_phy.h" +#include "base/ixgbe_osdep.h" #include "ixgbe_regs.h" /* drivers/net/ixgbe/ixgbe_flow.c +1
-1@@ -10,7 +10,6 @@#include <unistd.h> #include <stdarg.h> #include <inttypes.h> -#include <netinet/in.h> #include <rte_byteorder.h> #include <rte_common.h> #include <rte_cycles.h> @@ -37,6 +36,7 @@#include "base/ixgbe_api.h" #include "base/ixgbe_vf.h" #include "base/ixgbe_common.h" +#include "base/ixgbe_osdep.h" #include "ixgbe_ethdev.h" #include "ixgbe_bypass.h" #include "ixgbe_rxtx.h" drivers/net/ixgbe/ixgbe_tm.c +1
-1@@ -665,7 +665,7 @@ ixgbe_node_add(struct rte_eth_dev *dev, uint32_t node_id, }/* check level */ if (level_id !=RTE_TM_NODE_LEVEL_ID_ANY && - level_id != parent_node_type +1 ) { + level_id != (uint32_t )parent_node_type +1 ) { error->type =RTE_TM_ERROR_TYPE_NODE_PARAMS ; error->message ="Wrong level" ;return -EINVAL ;drivers/net/ixgbe/meson.build +0
-7@@ -1,12 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -if is_windows - build = false - reason = 'not supported on Windows' - subdir_done() -endif - cflags += ['-DRTE_LIBRTE_IXGBE_BYPASS'] subdir('base') --2.30.2