Skip to contentSkip to conversation

MIPS: ralink: fix PCI IO resources

PATCH Superseded Sergio Paracuellos 1 participant 7 messages Sep 25, 2021

Subsystems (4)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover MIPS: ralink: fix PCI IO resources

MIPs ralink need a special tratement regarding the way it handles PCI IO                                                           |6   
resources. On MIPS I/O ports are memory mapped, so we access them using normal                                                     |  1 
load/store instructions. MIPS 'plat_mem_setup()' function does a call to                                                           |  2 Sergio Paracuellos (6): 
'set_io_port_base(KSEG1)'. There, variable 'mips_io_port_base'                                                                     |  3   Revert "MIPS: ralink: don't define PC_IOBASE but increase
is set then using this address which is a virtual address to which all                                                             |  4     IO_SPACE_LIMIT"
ports are being mapped. Ralink I/O space has a mapping of bus address                                                              |  5   Revert "staging: mt7621-pci: set end limit for 'ioport_resource'"
equal to the window into the mmio space, with an offset of IO start range                                                          |  6   MIPS: ralink: set PCI_IOBASE to 'mips_io_port_base'
cpu address. This means that to have this working we need:                                                                         |  7   PCI: Allow architecture-specific pci_remap_iospace()
- linux port numbers in the range 0-0xffff.                                                                                        |  8   MIPS: implement architecture-specific 'pci_remap_iospace()'
- pci port numbers in the range 0-0xffff.                                                                                          |  9   staging: mt7621-pci: properly adjust base address for the IO window
- io_offset being zero.                                                                                                            | 10  
These means at the end to have bus address 0 mapped to IO range cpu address.                                                       | 12  arch/mips/include/asm/pci.h                | 2 ++
We need a way of properly set 'mips_io_port_base' with a virtually mapped                                                          | 13  arch/mips/pci/pci-generic.c                | 9 +++++++++
value of the IO cpu address.                                                                                                       | 14  drivers/pci/pci.c                          | 2 ++
This series do the following approach:                                                                                             | 16  5 files changed, 17 insertions(+), 4 deletions(-)
1) Revert two bad commit from a previous attempt of make this work [0].                                                            | 17 
2) Set PCI_IOBASE to mips 'mips_io_port_base'.                                                                                     | 18 -- 
3) Allow architecture dependent 'pci_remap_iospace'.                                                                               | 19 2.25.1
4) Implement 'pci_remap_iospace' for MIPS.                                                                                         | 20 
5) Be sure IOBASE address for IO window is set with correct value.                                                                 |~                                                                                                                                      

More context about this series appoach in this mail thread [1]. |~

Patches related with reverts are from this merge cycle so they are only added to the staging git tree. So to have all stuff together I'd like to get everybody Ack's to get all of this series through staging tree if possible :).

Thanks in advance for your time. |~

Changes in v2:
- re-do commit messages for PCI patch as Bjorn pointed out in previous series.
- Add Bjorn's Acked-by for PCI subsystem patch.
- Re-do commit message of MIPS 'pci_remap_iospace()' patch to align with changes in the PCI patch (s/architecture dependent/architecture-specific/)
- Add Fixes-by tag for MIPS set PCI_IOBASE patch.

[0]: https://www.spinics.net/lists/kernel/msg4051474.html |~
[1]: https://lkml.org/lkml/2021/9/22/6

Sergio Paracuellos (6):
Revert "MIPS: ralink: don't define PC_IOBASE but increase
IO_SPACE_LIMIT"
Revert "staging: mt7621-pci: set end limit for 'ioport_resource'"
MIPS: ralink: set PCI_IOBASE to 'mips_io_port_base'
PCI: Allow architecture-specific pci_remap_iospace()
MIPS: implement architecture-specific 'pci_remap_iospace()'
staging: mt7621-pci: properly adjust base address for the IO window

 arch/mips/include/asm/mach-ralink/spaces.h | 4 +++-
 arch/mips/include/asm/pci.h                | 2 ++
 arch/mips/pci/pci-generic.c                | 9 +++++++++
 drivers/pci/pci.c                          | 2 ++
 drivers/staging/mt7621-pci/pci-mt7621.c    | 4 +---
 5 files changed, 17 insertions(+), 4 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 1/6 Revert "MIPS: ralink: don't define PC_IOBASE but increase IO_SPACE_LIMIT"

This reverts commit 159697474db41732ef3b6c2e8d9395f09d1f659e.

There is no real need to increase IO_SPACE_LIMIT if PCI_IOBASE is properly set to 'mips_io_port_base'. Hence revert this commit first before doing anything else.

---
 arch/mips/include/asm/mach-ralink/spaces.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/mips/include/asm/mach-ralink/spaces.h +3 -1
index 31a3525213cf..87d085c9ad61 100644
@@ -2,7 +2,9 @@
 #ifndef __ASM_MACH_RALINK_SPACES_H_
 #define __ASM_MACH_RALINK_SPACES_H_
 
-#define IO_SPACE_LIMIT	0x1fffffff
+#define PCI_IOBASE	_AC(0xa0000000, UL)
+#define PCI_IOSIZE	SZ_16M
+#define IO_SPACE_LIMIT	(PCI_IOSIZE - 1)
 
 #include <asm/mach-generic/spaces.h>
 #endif
Signature · 1 line
2.25.1
#2 lore raw

PATCH v2 2/6 Revert "staging: mt7621-pci: set end limit for 'ioport_resource'"

In reply to Sergio Paracuellos

This reverts commit 50fb34eca2944fd67493717c9fbda125336f1655.

Since IO_SPACE_LIMIT is not really being changed there is no real need to adjust the ioport_resource end limit.

---
 drivers/staging/mt7621-pci/pci-mt7621.c | 2 --
 1 file changed, 2 deletions(-)
drivers/staging/mt7621-pci/pci-mt7621.c +0 -2
index 86d9c3d122e2..6acfc94a16e7 100644
@@ -526,8 +526,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	if (!dev->of_node)
 		return -ENODEV;
 
-	ioport_resource.end = IO_SPACE_LIMIT;
-
 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
 	if (!bridge)
 		return -ENOMEM;
Signature · 1 line
2.25.1
#3 lore raw

PATCH v2 3/6 MIPS: ralink: set PCI_IOBASE to 'mips_io_port_base'

In reply to Sergio Paracuellos

By default MIPS architecture use function 'set_io_port_base()' to set the virtual address of the first IO port. This function at the end sets variable 'mips_io_port_base' with the desired address. To align things and allow to change first IO port location address for PCI, set PCI_IOBASE definition as 'mips_io_port_base'.

Fixes 222b27713d7f ("MIPS: ralink: Define PCI_IOBASE")
---
 arch/mips/include/asm/mach-ralink/spaces.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/mips/include/asm/mach-ralink/spaces.h +2 -2
index 87d085c9ad61..05d14c21c417 100644
@@ -2,8 +2,8 @@
 #ifndef __ASM_MACH_RALINK_SPACES_H_
 #define __ASM_MACH_RALINK_SPACES_H_
 
-#define PCI_IOBASE	_AC(0xa0000000, UL)
-#define PCI_IOSIZE	SZ_16M
+#define PCI_IOBASE	mips_io_port_base
+#define PCI_IOSIZE	SZ_64K
 #define IO_SPACE_LIMIT	(PCI_IOSIZE - 1)
 
 #include <asm/mach-generic/spaces.h>
Signature · 1 line
2.25.1
#4 lore raw

PATCH v2 4/6 PCI: Allow architecture-specific pci_remap_iospace()

In reply to Sergio Paracuellos

pci_remap_iospace() was originally meant as an architecture specific helper but it moved into generic code after all architectures had the same requirements. MIPS has different requirements so it should not be shared.

The way for doing this will be using a macro 'pci_remap_iospace' defined for those architectures that need a special treatment. Hence, put core API function inside preprocesor conditional code for 'pci_remap_iospace' definition.

---
 drivers/pci/pci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pci/pci.c +2 -0
index ce2ab62b64cf..0ec57bb01a88 100644
@@ -4123,6 +4123,7 @@ unsigned long __weak pci_address_to_pio(phys_addr_t address)
  * architectures that have memory mapped IO functions defined (and the
  * PCI_IOBASE value defined) should call this function.
  */
+#ifndef pci_remap_iospace
 int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 {
 #if defined(PCI_IOBASE) && defined(CONFIG_MMU)
@@ -4146,6 +4147,7 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 #endif
 }
 EXPORT_SYMBOL(pci_remap_iospace);
+#endif
 
 /**
  * pci_unmap_iospace - Unmap the memory mapped I/O space
Signature · 1 line
2.25.1
#5 lore raw

PATCH v2 5/6 MIPS: implement architecture-specific 'pci_remap_iospace()'

In reply to Sergio Paracuellos

To make PCI IO work we need to properly virtually map IO cpu physical address and set this virtual address as the address of the first PCI IO port which is set using function 'set_io_port_base()'.

---
 arch/mips/include/asm/pci.h | 2 ++
 arch/mips/pci/pci-generic.c | 9 +++++++++
 2 files changed, 11 insertions(+)
arch/mips/include/asm/pci.h +2 -0
index 9ffc8192adae..35270984a5f0 100644
@@ -20,6 +20,8 @@
 #include <linux/list.h>
 #include <linux/of.h>
 
+#define pci_remap_iospace pci_remap_iospace
+
 #ifdef CONFIG_PCI_DRIVERS_LEGACY
 
 /*
arch/mips/pci/pci-generic.c +9 -0
index 95b00017886c..877ec9d6a614 100644
@@ -46,3 +46,12 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	pci_read_bridge_bases(bus);
 }
+
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
+{
+	size_t size = (res->end - res->start) + 1;
+	unsigned long vaddr = (unsigned long)ioremap(phys_addr, size);
+
+	set_io_port_base(vaddr);
+	return 0;
+}
Signature · 1 line
2.25.1
#6 lore raw

PATCH v2 6/6 staging: mt7621-pci: properly adjust base address for the IO window

In reply to Sergio Paracuellos

The value to adjust in the bridge register RALINK_PCI_IOBASE must take into account the raw value from DT, not only the translated linux port number. As long as io_offset is zero, the two are the same, but if you were to use multiple host bridge in the system, or pick a different bus address in DT, you can have a nonzero io_offset. At this means to take into account the bus address which is used to calculate this offset, substracting it from the IO resource start address.

---
 drivers/staging/mt7621-pci/pci-mt7621.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/mt7621-pci/pci-mt7621.c +1 -1
index 6acfc94a16e7..503cb1fca2e0 100644
@@ -482,7 +482,7 @@ static int mt7621_pcie_enable_ports(struct pci_host_bridge *host)
 
 	/* Setup MEMWIN and IOWIN */
 	pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
-	pcie_write(pcie, entry->res->start, RALINK_PCI_IOBASE);
+	pcie_write(pcie, entry->res->start - entry->offset, RALINK_PCI_IOBASE);
 
 	list_for_each_entry(port, &pcie->ports, list) {
 		if (port->enabled) {
Signature · 1 line
2.25.1