Skip to contentSkip to conversation

iio: adc: nau7802: convert probe to full device-managed

PATCH In review Alexandru Ardelean 3 participants 4 messages Sep 26, 2021 – Oct 2, 2021 IIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio: adc: nau7802: convert probe to full device-managed

This is a trivial conversion to device-managed functions.
The mutex_destroy() calls are redundant, as the data will be free'd anyway.

And the IRQ and IIO register functions both have device-managed equivalents.

---
 drivers/iio/adc/nau7802.c | 50 +++++++--------------------------------
 1 file changed, 9 insertions(+), 41 deletions(-)
drivers/iio/adc/nau7802.c +9 -41
index bb70b51d25b1..976c235f3079 100644
@@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 
-	i2c_set_clientdata(client, indio_dev);
-
 	indio_dev->name = dev_name(&client->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &nau7802_info;
@@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
 	 * will enable them back when we will need them..
 	 */
 	if (client->irq) {
-		ret = request_threaded_irq(client->irq,
-				NULL,
-				nau7802_eoc_trigger,
-				IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
-				IRQF_NO_AUTOEN,
-				client->dev.driver->name,
-				indio_dev);
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL,
+						nau7802_eoc_trigger,
+						IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
+						IRQF_NO_AUTOEN,
+						client->dev.driver->name,
+						indio_dev);
 		if (ret) {
 			/*
 			 * What may happen here is that our IRQ controller is
@@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
 		ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
 					  NAU7802_CTRL2_CRS(st->sample_rate));
 		if (ret)
-			goto error_free_irq;
+			return ret;
 	}
 
 	/* Setup the ADC channels available on the board */
@@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
 	mutex_init(&st->lock);
 	mutex_init(&st->data_lock);
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "Couldn't register the device.\n");
-		goto error_device_register;
-	}
-
-	return 0;
-
-error_device_register:
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-error_free_irq:
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return ret;
-}
-
-static int nau7802_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct nau7802_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id nau7802_i2c_id[] = {
@@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
 	.probe = nau7802_probe,
-	.remove = nau7802_remove,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
Signature · 1 line
2.31.1
maintainer
#1 lore raw
Quoted 7 lines · On Sun, 26 Sep 2021 18:49:32 +0300 Alexandru Ardelean <[email protected]>…

This is a trivial conversion to device-managed functions.
The mutex_destroy() calls are redundant, as the data will be free'd anyway.

And the IRQ and IIO register functions both have device-managed equivalents.

+CC Maxime and Alexandre.

Looks simple enough to me that I won't wait on their replies to queue it up. Obviously feedback welcome though!

Applied to the togreg branch of iio.git and pushed out as testing for 0-day to see if it can find stuff we missed.

Thanks,

Jonathan

Quoted 93 lines
---
 drivers/iio/adc/nau7802.c | 50 +++++++--------------------------------
 1 file changed, 9 insertions(+), 41 deletions(-)
drivers/iio/adc/nau7802.c +9 -41
index bb70b51d25b1..976c235f3079 100644
@@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 
-	i2c_set_clientdata(client, indio_dev);
-
 	indio_dev->name = dev_name(&client->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &nau7802_info;
@@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
 	 * will enable them back when we will need them..
 	 */
 	if (client->irq) {
-		ret = request_threaded_irq(client->irq,
-				NULL,
-				nau7802_eoc_trigger,
-				IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
-				IRQF_NO_AUTOEN,
-				client->dev.driver->name,
-				indio_dev);
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL,
+						nau7802_eoc_trigger,
+						IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
+						IRQF_NO_AUTOEN,
+						client->dev.driver->name,
+						indio_dev);
 		if (ret) {
 			/*
 			 * What may happen here is that our IRQ controller is
@@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
 		ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
 					  NAU7802_CTRL2_CRS(st->sample_rate));
 		if (ret)
-			goto error_free_irq;
+			return ret;
 	}
 
 	/* Setup the ADC channels available on the board */
@@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
 	mutex_init(&st->lock);
 	mutex_init(&st->data_lock);
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "Couldn't register the device.\n");
-		goto error_device_register;
-	}
-
-	return 0;
-
-error_device_register:
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-error_free_irq:
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return ret;
-}
-
-static int nau7802_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct nau7802_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id nau7802_i2c_id[] = {
@@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
 	.probe = nau7802_probe,
-	.remove = nau7802_remove,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
Reviewed-by
#2 lore raw
Quoted 11 lines · Jonathan Cameron
Quoted 7 lines · On Sun, 26 Sep 2021 18:49:32 +0300 Alexandru Ardelean <[email protected]>…

This is a trivial conversion to device-managed functions.
The mutex_destroy() calls are redundant, as the data will be free'd anyway.

And the IRQ and IIO register functions both have device-managed equivalents.

Quoted 8 lines

+CC Maxime and Alexandre.

Looks simple enough to me that I won't wait on their replies to queue it up. Obviously feedback welcome though!

Applied to the togreg branch of iio.git and pushed out as testing for 0-day to see if it can find stuff we missed.

This seems good to me too

Quoted 99 lines

Thanks,

Jonathan

Quoted 93 lines
---
 drivers/iio/adc/nau7802.c | 50 +++++++--------------------------------
 1 file changed, 9 insertions(+), 41 deletions(-)
drivers/iio/adc/nau7802.c +9 -41
index bb70b51d25b1..976c235f3079 100644
@@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 
-	i2c_set_clientdata(client, indio_dev);
-
 	indio_dev->name = dev_name(&client->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &nau7802_info;
@@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
 	 * will enable them back when we will need them..
 	 */
 	if (client->irq) {
-		ret = request_threaded_irq(client->irq,
-				NULL,
-				nau7802_eoc_trigger,
-				IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
-				IRQF_NO_AUTOEN,
-				client->dev.driver->name,
-				indio_dev);
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL,
+						nau7802_eoc_trigger,
+						IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
+						IRQF_NO_AUTOEN,
+						client->dev.driver->name,
+						indio_dev);
 		if (ret) {
 			/*
 			 * What may happen here is that our IRQ controller is
@@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
 		ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
 					  NAU7802_CTRL2_CRS(st->sample_rate));
 		if (ret)
-			goto error_free_irq;
+			return ret;
 	}
 
 	/* Setup the ADC channels available on the board */
@@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
 	mutex_init(&st->lock);
 	mutex_init(&st->data_lock);
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "Couldn't register the device.\n");
-		goto error_device_register;
-	}
-
-	return 0;
-
-error_device_register:
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-error_free_irq:
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return ret;
-}
-
-static int nau7802_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct nau7802_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id nau7802_i2c_id[] = {
@@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
 	.probe = nau7802_probe,
-	.remove = nau7802_remove,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
maintainer
#3 lore raw
Quoted 17 lines · On Fri, 1 Oct 2021 00:02:34 +0200 Alexandre Belloni…
Quoted 16 lines · Jonathan Cameron
Quoted 7 lines · On Sun, 26 Sep 2021 18:49:32 +0300 Alexandru Ardelean <[email protected]>…

This is a trivial conversion to device-managed functions.
The mutex_destroy() calls are redundant, as the data will be free'd anyway.

And the IRQ and IIO register functions both have device-managed equivalents.

+CC Maxime and Alexandre.

Looks simple enough to me that I won't wait on their replies to queue it up. Obviously feedback welcome though!

Quoted 6 lines
Quoted 3 lines

Applied to the togreg branch of iio.git and pushed out as testing for 0-day to see if it can find stuff we missed.

This seems good to me too

Great. Added tag.

Thanks,

Jonathan

Quoted 101 lines
Quoted 100 lines

Thanks,

Jonathan

Quoted 93 lines
---
 drivers/iio/adc/nau7802.c | 50 +++++++--------------------------------
 1 file changed, 9 insertions(+), 41 deletions(-)
drivers/iio/adc/nau7802.c +9 -41
index bb70b51d25b1..976c235f3079 100644
@@ -428,8 +428,6 @@ static int nau7802_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 
-	i2c_set_clientdata(client, indio_dev);
-
 	indio_dev->name = dev_name(&client->dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &nau7802_info;
@@ -495,13 +493,13 @@ static int nau7802_probe(struct i2c_client *client,
 	 * will enable them back when we will need them..
 	 */
 	if (client->irq) {
-		ret = request_threaded_irq(client->irq,
-				NULL,
-				nau7802_eoc_trigger,
-				IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
-				IRQF_NO_AUTOEN,
-				client->dev.driver->name,
-				indio_dev);
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL,
+						nau7802_eoc_trigger,
+						IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
+						IRQF_NO_AUTOEN,
+						client->dev.driver->name,
+						indio_dev);
 		if (ret) {
 			/*
 			 * What may happen here is that our IRQ controller is
@@ -526,7 +524,7 @@ static int nau7802_probe(struct i2c_client *client,
 		ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
 					  NAU7802_CTRL2_CRS(st->sample_rate));
 		if (ret)
-			goto error_free_irq;
+			return ret;
 	}
 
 	/* Setup the ADC channels available on the board */
@@ -536,36 +534,7 @@ static int nau7802_probe(struct i2c_client *client,
 	mutex_init(&st->lock);
 	mutex_init(&st->data_lock);
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "Couldn't register the device.\n");
-		goto error_device_register;
-	}
-
-	return 0;
-
-error_device_register:
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-error_free_irq:
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return ret;
-}
-
-static int nau7802_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct nau7802_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	mutex_destroy(&st->lock);
-	mutex_destroy(&st->data_lock);
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id nau7802_i2c_id[] = {
@@ -582,7 +551,6 @@ MODULE_DEVICE_TABLE(of, nau7802_dt_ids);
 
 static struct i2c_driver nau7802_driver = {
 	.probe = nau7802_probe,
-	.remove = nau7802_remove,
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",