gpio: mockup: Convert to use software nodes
Subsystems (2)
PATCH v2 1/1 gpio: mockup: Convert to use software nodes
The gpio-mockup driver creates the properties that are shared between platform and GPIO devices. Because of that, the properties may not be removed at the proper point of time without provoking a use-after-free as shown in the following backtrace:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120 ... Call Trace: kobject_put+0xdc/0xf0 software_node_notify_remove+0xa8/0xc0 device_del+0x15a/0x3e0
That's why the driver has to manage the lifetime of the software nodes by itself.
The problem originates from the old device_add_properties() API, but has been only revealed after the commit bd1e336aa853 ("driver core: platform:
Remove platform_device_add_properties()"). Hence, it's used as a landmark for the backporting.
---
v2: updated Fixes (Kent), added Tested-by (Kent), amended grammar a bit
drivers/gpio/gpio-mockup.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
drivers/gpio/gpio-mockup.c +19 -3
@@ -478,8 +478,18 @@ static void gpio_mockup_unregister_pdevs(void) {int i; -for (i =0 ; i <GPIO_MOCKUP_MAX_GC ; i++) -platform_device_unregister (gpio_mockup_pdevs[i]); +for (i =0 ; i <GPIO_MOCKUP_MAX_GC ; i++) { +struct platform_device *pdev; +struct fwnode_handle *fwnode; + + pdev = gpio_mockup_pdevs[i]; +if (!pdev) +continue ; + + fwnode =dev_fwnode (&pdev->dev); +platform_device_unregister (pdev); +fwnode_remove_software_node (fwnode); + } } static __init char **gpio_mockup_make_line_names(const char *label,
@@ -508,6 +518,7 @@ static int __init gpio_mockup_register_chip(int idx)struct property_entry properties[GPIO_MOCKUP_MAX_PROP ];struct platform_device_info pdevinfo;struct platform_device *pdev; +struct fwnode_handle *fwnode;char **line_names =NULL ;char chip_label[32 ];int prop =0 , base;
@@ -536,13 +547,18 @@ static int __init gpio_mockup_register_chip(int idx) "gpio-line-names", line_names, ngpio); } + fwnode =fwnode_create_software_node (properties,NULL ); +if (IS_ERR (fwnode)) +return PTR_ERR (fwnode); + pdevinfo.name ="gpio-mockup" ; pdevinfo.id = idx; - pdevinfo.properties = properties; + pdevinfo.fwnode = fwnode; pdev =platform_device_register_full (&pdevinfo);kfree_strarray (line_names, ngpio);if (IS_ERR (pdev)) { +fwnode_remove_software_node (fwnode);pr_err ("error registering device" );return PTR_ERR (pdev); }
Signature · 1 line
2.33.0
Quoted 1 line · Andy Shevchenko
Reported-tested-by Kent Gibson <[email protected]>
Oopsista, should be "Reported-and-tested-by:". I hope you can fix it when applying, but tell me if I need to send a v3.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 7 lines · Andy Shevchenko
Quoted 1 line · Andy Shevchenko
Reported-tested-by Kent Gibson <[email protected]>Oopsista, should be "Reported-and-tested-by:". I hope you can fix it when applying, but tell me if I need to send a v3.
Nevermind. just sent a v3 to make everyone's life easier!
Signature · 2 lines
With Best Regards, Andy Shevchenko