Skip to contentSkip to conversation

i.MX fixes for 5.15, round 2

GIT PULL Applied Shawn Guo 2 participants 2 messages Oct 6, 2021 – Oct 7, 2021

lore
Share & tools
lore

Shawn Guo

author
#0 lore raw

The following changes since commit c54467482ffd407a4404c990697f432bfcb6cdc4:

ARM: imx_v6_v7_defconfig: enable fb (2021-09-22 16:47:34 +0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.15-2

for you to fetch changes up to 3518441dda666696707afe933586151c0fb29db0:

arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio (2021-10-05 14:26:21 +0800)

----------------------------------------------------------------
i.MX fixes for 5.15, round 2:

- A couple of fixes from Haibo Chen to update SPI NOR TX bus width for i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver starts using the setting in DT.
- Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the core supply being turned off unexpectedly.
- Fix eSDHC2 device tree settings for LS1028A SoC.
- Disable GIC CPU interface before calling stby-poweroff sequence to fix power-off failure on i.MX6.
- Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards.

----------------------------------------------------------------
Haibo Chen (2):
ARM: dts: imx: change the spi-nor tx
arm64: dts: imx8: change the spi-nor tx

Heiko Thiery (1):
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2

Michael Walle (1):

      arm64: dts: ls1028a: fix eSDHC2 node

Oleksij Rempel (1):
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence

Tim Harvey (1):

      arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
 arch/arm/boot/dts/imx6sx-sdb.dts                            | 4 ++--
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi                     | 2 +-
 arch/arm/mach-imx/pm-imx6.c                                 | 2 ++
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi              | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi        | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-evk.dts                | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 1 +
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts      | 2 +-
 arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi        | 2 +-
 arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts      | 2 +-
 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi       | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts                | 2 ++
 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 2 +-
 13 files changed, 17 insertions(+), 12 deletions(-)
#1 lore raw
This pull request was applied to soc/soc.git (arm/fixes) by Arnd Bergmann <[email protected]>:

Hello:

This pull request was applied to soc/soc.git (arm/fixes) by Arnd Bergmann <[email protected]>:

Quoted 9 lines · On Wed, 6 Oct 2021 20:57:35 +0800 you wrote:

The following changes since commit c54467482ffd407a4404c990697f432bfcb6cdc4:

ARM: imx_v6_v7_defconfig: enable fb (2021-09-22 16:47:34 +0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.15-2

[...]

Here is the summary with links:
- [GIT,PULL] i.MX fixes for 5.15, round 2

    https://git.kernel.org/soc/soc/c/2250596374f5

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html