ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
PATCH v2 1/1 ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range.
Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached.
---
V2: The orignal patch had the wrong file added. Add the omap36xx.dtsi
arch/arm/boot/dts/omap36xx.dtsi +0 -1
@@ -72,7 +72,6 @@ opp1g-1000000000 { <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; - turbo-mode; }; };
Signature · 1 line
2.25.1
Quoted 6 lines · Adam Ford
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range.
Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached.
Thanks applying into omap-for-v5.12/dt.
Tony
Quoted 11 lines · On Sat, 9 Jan 2021 11:01:03 -0600 Adam Ford <[email protected]> wrote:
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range.
Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached.
Signed-off-by Adam Ford <[email protected]>---
V2: The orignal patch had the wrong file added. Add theomap36xx.dtsi
hmm, I somehow expected that there is a revert of this thing going through. But now, the turbo-mode is still missing and I understood the revert is only in Nikolaus' trees. The 1Ghz mode was working for some time but does not anymore. Is it just me or do others also have the same problems?
Regards,
Andreas
Quoted 12 lines
arch/arm/boot/dts/omap36xx.dtsi +0
-1@@ -72,7 +72,6 @@ opp1g-1000000000 { <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; - turbo-mode; }; };
Quoted 14 lines
Am 01.10.2021 um 09:54 schrieb Andreas Kemnade <[email protected]>:
Quoted 7 lines · On Sat, 9 Jan 2021 11:01:03 -0600 Adam Ford <[email protected]> wrote:
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range.
Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached.
Quoted 6 lines
Quoted 4 lines
Signed-off-by Adam Ford <[email protected]>---
V2: The orignal patch had the wrong file added. Add theomap36xx.dtsihmm, I somehow expected that there is a revert of this thing going through. But now, the turbo-mode is still missing
tagging by turbo-mode means the OPP is *disabled* by default and needs to be enabled actively.
Quoted 2 lines
and I understood the
revert is only in Nikolaus' trees.
It is just a revert for the gta04a5 because I think it is the only board which is affected (maybe it would need SmartReflex in operation to fine tune the OPPs compared to the generic table). Therefore I have a patch which adds turbo-mode to the gta04a5.dts
Quoted 3 lines
The 1Ghz mode was working for some
time but does not anymore. Is it just me or do others also have the same problems?
That would be interesting to know.
BR,
NIkolaus
Quoted 15 lines
Quoted 14 lines
arch/arm/boot/dts/omap36xx.dtsi +0
-1@@ -72,7 +72,6 @@ opp1g-1000000000 { <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; - turbo-mode; }; };
Quoted 33 lines · H. Nikolaus Schaller
Quoted 15 lines
Am 01.10.2021 um 09:54 schrieb Andreas Kemnade <[email protected]>:
Quoted 7 lines · On Sat, 9 Jan 2021 11:01:03 -0600 Adam Ford <[email protected]> wrote:
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range.
Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached.
Quoted 6 lines
Quoted 4 lines
Signed-off-by Adam Ford <[email protected]>---
V2: The orignal patch had the wrong file added. Add theomap36xx.dtsihmm, I somehow expected that there is a revert of this thing going through. But now, the turbo-mode is still missing
tagging by turbo-mode means the OPP is *disabled* by default and needs to be enabled actively.
Quoted 2 lines
and I understood the
revert is only in Nikolaus' trees.It is just a revert for the gta04a5 because I think it is the only board which is affected (maybe it would need SmartReflex in operation to fine tune the OPPs compared to the generic table). Therefore I have a patch which adds turbo-mode to the
gta04a5.dts
Quoted 6 lines
Quoted 3 lines
The 1Ghz mode was working for some
time but does not anymore. Is it just me or do others also have the same problems?That would be interesting to know.
What version are you seeing the break? It's working for me on 5.15.y branch
# cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies 300000 600000 800000 1000000 # uname -a Linux buildroot 5.14.9-00260-g70248e7b378b-dirty #1 SMP Sat Oct 2 06:56:02 CDT 2021 armv7l GNU/Linux #
adam
Quoted 19 lines
BR,
NIkolausQuoted 15 lines
Quoted 14 lines
arch/arm/boot/dts/omap36xx.dtsi +0
-1@@ -72,7 +72,6 @@ opp1g-1000000000 { <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; - turbo-mode; }; };
Quoted 41 lines · On Sat, 2 Oct 2021 07:12:05 -0500 Adam Ford <[email protected]> wrote:
Quoted 33 lines · H. Nikolaus Schaller
Quoted 15 lines
Am 01.10.2021 um 09:54 schrieb Andreas Kemnade <[email protected]>:
Quoted 7 lines · On Sat, 9 Jan 2021 11:01:03 -0600 Adam Ford <[email protected]> wrote:
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range.
Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached.
Quoted 6 lines
Quoted 4 lines
Signed-off-by Adam Ford <[email protected]>---
V2: The orignal patch had the wrong file added. Add theomap36xx.dtsihmm, I somehow expected that there is a revert of this thing going through. But now, the turbo-mode is still missing
tagging by turbo-mode means the OPP is *disabled* by default and needs to be enabled actively.
Quoted 2 lines
and I understood the
revert is only in Nikolaus' trees.It is just a revert for the gta04a5 because I think it is the only board which is affected (maybe it would need SmartReflex in operation to fine tune the OPPs compared to the generic table). Therefore I have a patch which adds turbo-mode to the
gta04a5.dtsQuoted 6 lines
Quoted 3 lines
The 1Ghz mode was working for some
time but does not anymore. Is it just me or do others also have the same problems?That would be interesting to know.
Quoted 9 lines
What version are you seeing the break? It's working for me on 5.15.y branch
# cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies 300000 600000 800000 1000000 # uname -a Linux buildroot 5.14.9-00260-g70248e7b378b-dirty #1 SMP Sat Oct 2 06:56:02 CDT 2021 armv7l GNU/Linux #
I see this one: I remember there was also a discussion about proper handling of that but I do not remember the final result:
Author: H. Nikolaus Schaller <[email protected]> Date: Mon Dec 2 22:10:55 2019 +0100
Revert "ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()"
This reverts commit cf395f7ddb9ebc6b2d28d83b53d18aa4e7c19701.
This patch is in conflict with 1GHz OPP.
commit ae44b701fb6afb2be62defff590531e3b0632772
Author: H. Nikolaus Schaller <[email protected]> Date: Sat Apr 10 16:59:53 2021 +0200
ARM: DTS: gta04a5: disable 1GHz OPP again because it is not reliable
To enable on a running system:
echo 1 >/sys/devices/system/cpu/cpufreq/boost
The symptom can be spurious hangs and virtual paging error, kernel panics and strange things.
on top of 5.13-rcX in Nikolaus trees.
Regards,
Andreas