x86: clk: Add config option to enable 48MHz fixed fch clk
Subsystems (2)
PATCH 1/5 x86: clk: Add config option to enable 48MHz fixed fch clk
At present 48MHz clk support is only enabled for RV architecture using "is-rv" device property initialized from boot loader. This limit 48MHz fixed clock gate support to RV platform unless we add similar device property in boot loader for other architecture.
Add Kernel config option to enable 48MHz fixed clk gate registration with clock framework. This enahanced flexibility to enable 48MHz fch clock support on any platforms by simply enabling kernel config. Also replace RV with FIXED as generic naming convention across platforms.
--- drivers/clk/x86/Kconfig | 5 +++++ drivers/clk/x86/clk-fch.c | 19 +++++++++++-------- 2 files changed, 16 insertions(+), 8 deletions(-)
drivers/clk/x86/Kconfig +5 -0
@@ -6,3 +6,8 @@ config CLK_LGM_CGU help Clock Generation Unit(CGU) driver for Intel Lightning Mountain(LGM) network processor SoC. + +config CLK_FIXED_FCH + bool "AMD FCH controller fixed 48MHz CLK support" + help + Enable this option for 48MHz fixed mclk support on AMD platforms.
drivers/clk/x86/clk-fch.c +11 -8
@@ -26,9 +26,9 @@#define ST_CLK_GATE 3#define ST_MAX_CLKS 4 -#define RV_CLK_48M 0 -#define RV_CLK_GATE 1 -#define RV_MAX_CLKS 2 +#define CLK_48M_FIXED 0 +#define CLK_GATE_FIXED 1 +#define CLK_MAX_FIXED 2static const char *const clk_oscout1_parents[] = {"clk48MHz" ,"clk25MHz" };static struct clk_hw *hws[ST_MAX_CLKS ];
@@ -41,7 +41,7 @@ static int fch_clk_probe(struct platform_device *pdev)if (!fch_data || !fch_data->base)return -EINVAL ; -if (!fch_data->is_rv) { +if (!IS_ENABLED (CONFIG_CLK_FIXED_FCH )) { hws[ST_CLK_48M ] =clk_hw_register_fixed_rate (NULL ,"clk48MHz" ,NULL ,0 ,48000000 ); hws[ST_CLK_25M] = clk_hw_register_fixed_rate(NULL, "clk25MHz",
@@ -61,14 +61,14 @@ static int fch_clk_probe(struct platform_device *pdev)devm_clk_hw_register_clkdev (&pdev->dev, hws[ST_CLK_GATE ],"oscout1" ,NULL ); }else { - hws[RV_CLK_48M ] =clk_hw_register_fixed_rate (NULL ,"clk48MHz" , + hws[CLK_48M_FIXED ] =clk_hw_register_fixed_rate (NULL ,"clk48MHz" ,NULL ,0 ,48000000 ); - hws[RV_CLK_GATE ] =clk_hw_register_gate (NULL ,"oscout1" , + hws[CLK_GATE_FIXED ] =clk_hw_register_gate (NULL ,"oscout1" ,"clk48MHz" ,0 , fch_data->base +MISCCLKCNTL1 ,OSCCLKENB ,CLK_GATE_SET_TO_DISABLE ,NULL ); -devm_clk_hw_register_clkdev (&pdev->dev, hws[RV_CLK_GATE ], +devm_clk_hw_register_clkdev (&pdev->dev, hws[CLK_GATE_FIXED ],"oscout1" ,NULL ); }
@@ -82,7 +82,10 @@ static int fch_clk_remove(struct platform_device *pdev) fch_data =dev_get_platdata (&pdev->dev); - clks = fch_data->is_rv ?RV_MAX_CLKS :ST_MAX_CLKS ; + clks =ST_MAX_CLKS ; + +if (IS_ENABLED (CONFIG_CLK_FIXED_FCH )) + clks =CLK_MAX_FIXED ;for (i =0 ; i < clks; i++)clk_hw_unregister (hws[i]);
Signature · 1 line
2.25.1
PATCH 2/5 drivers: acpi: acpi_apd: Remove unused device property "is-rv"
Initially "is-rv" device property is added for 48MHz fixed clock support on Raven or RV architecture. It's unused now as we moved to clock config based selection to extend such support on others architecture. This change removed unused code from acpi driver.
--- drivers/acpi/acpi_apd.c | 3 --- include/linux/platform_data/clk-fch.h | 1 - 2 files changed, 4 deletions(-)
drivers/acpi/acpi_apd.c +0 -3
@@ -87,9 +87,6 @@ static int fch_misc_setup(struct apd_private_data *pdata)if (ret <0 )return -ENOENT ; -if (!acpi_dev_get_property (adev,"is-rv" ,ACPI_TYPE_INTEGER , &obj)) - clk_data->is_rv = obj->integer.value; -list_for_each_entry (rentry, &resource_list, node) { clk_data->base =devm_ioremap (&adev->dev, rentry->res->start,resource_size (rentry->res));
include/linux/platform_data/clk-fch.h +0 -1
@@ -12,7 +12,6 @@struct fch_clk_data {void __iomem *base; -u32 is_rv; };#endif /* __CLK_FCH_H */
Signature · 1 line
2.25.1
PATCH 3/5 ACPI: APD: Add a fmw property clk-name
In reply to Ajit Kumar PandeyAdd a new device property to fetch clk-name from firmware.
--- drivers/acpi/acpi_apd.c | 10 ++++++++++ include/linux/platform_data/clk-fch.h | 1 + 2 files changed, 11 insertions(+)
drivers/acpi/acpi_apd.c +10 -0
@@ -87,6 +87,16 @@ static int fch_misc_setup(struct apd_private_data *pdata)if (ret <0 )return -ENOENT ; +if (!acpi_dev_get_property (adev,"clk-name" ,ACPI_TYPE_STRING , &obj)) { + clk_data->name =devm_kzalloc (&adev->dev, obj->string.length, +GFP_KERNEL ); + +strcpy (clk_data->name, obj->string.pointer); + }else { +/* Set default name to mclk if entry missing in firmware */ + clk_data->name ="mclk" ; + } +list_for_each_entry (rentry, &resource_list, node) { clk_data->base =devm_ioremap (&adev->dev, rentry->res->start,resource_size (rentry->res));
include/linux/platform_data/clk-fch.h +1 -0
@@ -12,6 +12,7 @@struct fch_clk_data {void __iomem *base; +char *name; };#endif /* __CLK_FCH_H */
Signature · 1 line
2.25.1
PATCH 4/5 clk: x86: Use dynamic con_id string during clk registration
In reply to Ajit Kumar PandeyReplace hard coded con_id string with fch_data->name. We have clk consumers looking up with different clock names, hence use dynamic con_id string during clk lookup registration. fch_data->name will be initialized in acpi driver based on fmw property value.
--- drivers/clk/x86/clk-fch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/x86/clk-fch.c +1 -1
@@ -69,7 +69,7 @@ static int fch_clk_probe(struct platform_device *pdev) OSCCLKENB, CLK_GATE_SET_TO_DISABLE, NULL);devm_clk_hw_register_clkdev (&pdev->dev, hws[CLK_GATE_FIXED ], -"oscout1" ,NULL ); + fch_data->name,NULL ); }return 0 ;
Signature · 1 line
2.25.1
PATCH 5/5 clk: x86: Fix clk_gate_flags for RV_CLK_GATE
In reply to Ajit Kumar PandeyIn AMD's SoC we have to clear bit for disabling 48MHz oscillator clock gate. Remove CLK_GATE_SET_TO_DISABLE flag for proper enable and disable of 48MHz clock.
--- drivers/clk/x86/clk-fch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/x86/clk-fch.c +1 -1
@@ -66,7 +66,7 @@ static int fch_clk_probe(struct platform_device *pdev) hws[CLK_GATE_FIXED ] =clk_hw_register_gate (NULL ,"oscout1" ,"clk48MHz" ,0 , fch_data->base +MISCCLKCNTL1 , -OSCCLKENB ,CLK_GATE_SET_TO_DISABLE ,NULL ); +OSCCLKENB ,0 ,NULL );devm_clk_hw_register_clkdev (&pdev->dev, hws[CLK_GATE_FIXED ], fch_data->name,NULL );
Signature · 1 line
2.25.1
kernel test robot
build botThank you for the patch! Yet something to improve:
Hi Ajit,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on clk/clk-next]
[also build test ERROR on rafael-pm/linux-next linus/master v5.15-rc5 next-20211011] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Ajit-Kumar-Pandey/x86-clk-Add-config-option-to-enable-48MHz-fixed-fch-clk/20211011-124732 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next config: i386-allyesconfig (attached as .config) compiler: gcc-9 (Debian 9.3.0-22) 9.3.0 reproduce (this is a W=1 build): # https://github.com/0day-ci/linux/commit/f33c19d1cd863fd12fff7433a6bb22a2b0e22dfe git remote add linux-review https://github.com/0day-ci/linux git fetch --no-tags linux-review Ajit-Kumar-Pandey/x86-clk-Add-config-option-to-enable-48MHz-fixed-fch-clk/20211011-124732 git checkout f33c19d1cd863fd12fff7433a6bb22a2b0e22dfe # save the attached .config to linux build tree make W=1 ARCH=i386
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
drivers/clk/x86/clk-fch.c: In function 'fch_clk_remove':
>> drivers/clk/x86/clk-fch.c:81:23: error: variable 'fch_data' set but not used [-Werror=unused-but-set-variable]
81 | struct fch_clk_data *fch_data;
| ^~~~~~~~cc1: all warnings being treated as errors
vim +/fch_data +81 drivers/clk/x86/clk-fch.c
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 77
d9b77361c1a515 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 78 static int fch_clk_remove(struct platform_device *pdev)
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 79 {
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 80 int i, clks;
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 @81 struct fch_clk_data *fch_data;
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 82
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 83 fch_data = dev_get_platdata(&pdev->dev);
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 84
f33c19d1cd863f drivers/clk/x86/clk-fch.c Ajit Kumar Pandey 2021-10-11 85 clks = ST_MAX_CLKS;
f33c19d1cd863f drivers/clk/x86/clk-fch.c Ajit Kumar Pandey 2021-10-11 86
f33c19d1cd863f drivers/clk/x86/clk-fch.c Ajit Kumar Pandey 2021-10-11 87 if (IS_ENABLED(CONFIG_CLK_FIXED_FCH))
f33c19d1cd863f drivers/clk/x86/clk-fch.c Ajit Kumar Pandey 2021-10-11 88 clks = CLK_MAX_FIXED;
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 89
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 90 for (i = 0; i < clks; i++)
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 91 clk_hw_unregister(hws[i]);
19fe87fd854a92 drivers/clk/x86/clk-fch.c Akshu Agrawal 2020-07-31 92
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 93 return 0;
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 94 }
421bf6a1f061a6 drivers/clk/x86/clk-st.c Akshu Agrawal 2018-05-09 95 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]