Skip to contentSkip to conversation

drm/omap: increase DSS5 max tv pclk to 192MHz

PATCH In review Neil Armstrong 2 participants 3 messages Oct 12, 2021 – Nov 10, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/omap: increase DSS5 max tv pclk to 192MHz

From: Tomi Valkeinen <[email protected]>

DSS5's maximum tv pclk rate (i.e. HDMI) is set to 186MHz, which comes from the TRM (DPLL_HDMI_CLK1 frequency must be lower than 186 MHz). To support DRA76's wide screen HDMI feature, we need to increase this maximum rate.

Testing shows that the PLL seems to work fine even with ~240MHz clocks, and even the HDMI output at that clock is stable enough for monitors to show a picture. This holds true for all DRA7 and AM5 SoCs (and probably also for OMAP5).

However, the highest we can go without big refactoring to the clocking code is 192MHz, as that is the DSS func clock we get from the PRCM. So, increase the max HDMI pixel clock to 192MHz for now, to allow some more 2k+ modes to work.

This patch never had a clear confirmation from HW people, but this change stayed on production trees for multiple years without any report on an eventual breakage.

---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Tomi,

I slighly changed the commit message to point the fact this patch has been used in production fort years without any sign of breakage.

Neil

drivers/gpu/drm/omapdrm/dss/dispc.c +1 -1
index 5619420cc2cc..3c4a4991e45a 100644
@@ -4458,7 +4458,7 @@ static const struct dispc_features omap54xx_dispc_feats = {
 	.mgr_width_max		=	4096,
 	.mgr_height_max		=	4096,
 	.max_lcd_pclk		=	170000000,
-	.max_tv_pclk		=	186000000,
+	.max_tv_pclk		=	192000000,
 	.max_downscale		=	4,
 	.max_line_width		=	2048,
 	.min_pcd		=	1,

base-commit: e4e737bb5c170df6135a127739a9e6148ee3da82

Signature · 1 line
2.25.1
#1 lore raw

Hi Tomi,

Quoted 48 lines · Neil Armstrong

From: Tomi Valkeinen <[email protected]>

DSS5's maximum tv pclk rate (i.e. HDMI) is set to 186MHz, which comes from the TRM (DPLL_HDMI_CLK1 frequency must be lower than 186 MHz). To support DRA76's wide screen HDMI feature, we need to increase this maximum rate.

Testing shows that the PLL seems to work fine even with ~240MHz clocks, and even the HDMI output at that clock is stable enough for monitors to show a picture. This holds true for all DRA7 and AM5 SoCs (and probably also for OMAP5).

However, the highest we can go without big refactoring to the clocking code is 192MHz, as that is the DSS func clock we get from the PRCM. So, increase the max HDMI pixel clock to 192MHz for now, to allow some more 2k+ modes to work.

This patch never had a clear confirmation from HW people, but this change stayed on production trees for multiple years without any report on an eventual breakage.

---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Tomi,

I slighly changed the commit message to point the fact this patch has been used in production fort years without any sign of breakage.

Neil

drivers/gpu/drm/omapdrm/dss/dispc.c +1 -1
index 5619420cc2cc..3c4a4991e45a 100644
@@ -4458,7 +4458,7 @@ static const struct dispc_features omap54xx_dispc_feats = {
 	.mgr_width_max		=	4096,
 	.mgr_height_max		=	4096,
 	.max_lcd_pclk		=	170000000,
-	.max_tv_pclk		=	186000000,
+	.max_tv_pclk		=	192000000,
 	.max_downscale		=	4,
 	.max_line_width		=	2048,
 	.min_pcd		=	1,
Quoted 2 lines

base-commit: e4e737bb5c170df6135a127739a9e6148ee3da82

Gentle ping,

Neil

maintainer
#2 lore raw
Quoted 51 lines · Neil Armstrong

Hi Tomi,

Quoted 48 lines · Neil Armstrong

From: Tomi Valkeinen <[email protected]>

DSS5's maximum tv pclk rate (i.e. HDMI) is set to 186MHz, which comes from the TRM (DPLL_HDMI_CLK1 frequency must be lower than 186 MHz). To support DRA76's wide screen HDMI feature, we need to increase this maximum rate.

Testing shows that the PLL seems to work fine even with ~240MHz clocks, and even the HDMI output at that clock is stable enough for monitors to show a picture. This holds true for all DRA7 and AM5 SoCs (and probably also for OMAP5).

However, the highest we can go without big refactoring to the clocking code is 192MHz, as that is the DSS func clock we get from the PRCM. So, increase the max HDMI pixel clock to 192MHz for now, to allow some more 2k+ modes to work.

This patch never had a clear confirmation from HW people, but this change stayed on production trees for multiple years without any report on an eventual breakage.

---
  drivers/gpu/drm/omapdrm/dss/dispc.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

Tomi,

I slighly changed the commit message to point the fact this patch has been used in production fort years without any sign of breakage.

Neil

drivers/gpu/drm/omapdrm/dss/dispc.c +1 -1
index 5619420cc2cc..3c4a4991e45a 100644
@@ -4458,7 +4458,7 @@ static const struct dispc_features omap54xx_dispc_feats = {
  	.mgr_width_max		=	4096,
  	.mgr_height_max		=	4096,
  	.max_lcd_pclk		=	170000000,
-	.max_tv_pclk		=	186000000,
+	.max_tv_pclk		=	192000000,
  	.max_downscale		=	4,
  	.max_line_width		=	2048,
  	.min_pcd		=	1,
Quoted 4 lines
Quoted 2 lines

base-commit: e4e737bb5c170df6135a127739a9e6148ee3da82

Gentle ping,

Thanks, I'll apply this to drm-misc-next.

Tomi