Skip to contentSkip to conversation

bcm47xx: Get rid of redundant 'else'

PATCH Applied Andy Shevchenko 2 participants 4 messages Oct 13, 2021 – Oct 18, 2021 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 bcm47xx: Get rid of redundant 'else'

In the snipped like

	if (...)
		return ...;
	else

the 'else' is redundant. Get rid of it.

---
 arch/mips/pci/pci-bcm47xx.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
arch/mips/pci/pci-bcm47xx.c +1 -3
index 230d7dd273e2..e8ff8e32a729 100644
@@ -93,12 +93,10 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 #ifdef CONFIG_BCM47XX_SSB
 	if (bcm47xx_bus_type ==	 BCM47XX_BUS_TYPE_SSB)
 		return bcm47xx_pcibios_plat_dev_init_ssb(dev);
-	else
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	if  (bcm47xx_bus_type ==  BCM47XX_BUS_TYPE_BCMA)
 		return bcm47xx_pcibios_plat_dev_init_bcma(dev);
-	else
 #endif
-		return 0;
+	return 0;
 }
Signature · 1 line
2.33.0
#1 lore raw

PATCH 2/2 bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()

Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() which provides PCI device name in a unified way.

---
 arch/mips/pci/pci-bcm47xx.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
arch/mips/pci/pci-bcm47xx.c +4 -8
index e8ff8e32a729..ffac06a5ca20 100644
@@ -41,8 +41,7 @@ static int bcm47xx_pcibios_plat_dev_init_ssb(struct pci_dev *dev)
 
 	res = ssb_pcibios_plat_dev_init(dev);
 	if (res < 0) {
-		printk(KERN_ALERT "PCI: Failed to init device %s\n",
-		       pci_name(dev));
+		pci_alert(dev, "PCI: Failed to init device\n");
 		return res;
 	}
 
@@ -52,8 +51,7 @@ static int bcm47xx_pcibios_plat_dev_init_ssb(struct pci_dev *dev)
 
 	/* IRQ-0 and IRQ-1 are software interrupts. */
 	if (res < 2) {
-		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
-		       pci_name(dev));
+		pci_alert(dev, "PCI: Failed to map IRQ of device\n");
 		return res;
 	}
 
@@ -69,8 +67,7 @@ static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev)
 
 	res = bcma_core_pci_plat_dev_init(dev);
 	if (res < 0) {
-		printk(KERN_ALERT "PCI: Failed to init device %s\n",
-		       pci_name(dev));
+		pci_alert(dev, "PCI: Failed to init device\n");
 		return res;
 	}
 
@@ -78,8 +75,7 @@ static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev)
 
 	/* IRQ-0 and IRQ-1 are software interrupts. */
 	if (res < 2) {
-		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
-		       pci_name(dev));
+		pci_alert(dev, "PCI: Failed to map IRQ of device\n");
 		return res;
 	}
 
Signature · 1 line
2.33.0
maintainer Applied
#2 lore raw

Re: [PATCH v1 2/2] bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()

Quoted 7 lines · Andy Shevchenko

Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() which provides PCI device name in a unified way.

---
 arch/mips/pci/pci-bcm47xx.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

applied to mips-next.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]
maintainer Applied
#3 lore raw
In reply to Andy Shevchenko
Quoted 6 lines · Andy Shevchenko

In the snipped like

	if (...)
		return ...;
	else
Quoted 6 lines

the 'else' is redundant. Get rid of it.

---
 arch/mips/pci/pci-bcm47xx.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

applied to mips-next.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]