Update mpc5200 dts files to fix warnings

PATCH In review Anatolij Gustschin 3 participants 8 messages Oct 13, 2021 – Nov 2, 2021

Subsystems (2)

Device tree bindings PowerPC

lore

Share & tools

lore

Anatolij Gustschin

author

2021-10-13 22:05 UTC #0 lore raw

cover Update mpc5200 dts files to fix warnings

This series fixes localbus, memory and pci node build warnings. It was tested with current linux-next on digsy_mtc and tqm5200 boards.

Anatolij Gustschin (4):
powerpc/5200: dts: add missing pci ranges
powerpc/5200: dts: fix pci ranges warnings
powerpc/5200: dts: fix memory node unit name
powerpc/5200: dts: fix localbus node warnings

 arch/powerpc/boot/dts/a3m071.dts    | 12 ++++-----
 arch/powerpc/boot/dts/a4m072.dts    | 26 ++++++++++----------
 arch/powerpc/boot/dts/charon.dts    | 22 ++++++++---------
 arch/powerpc/boot/dts/cm5200.dts    |  7 ++++--
 arch/powerpc/boot/dts/digsy_mtc.dts | 24 +++++++++---------
 arch/powerpc/boot/dts/lite5200.dts  | 12 ++++-----
 arch/powerpc/boot/dts/lite5200b.dts | 14 ++++++-----
 arch/powerpc/boot/dts/media5200.dts | 28 +++++++++++----------
 arch/powerpc/boot/dts/motionpro.dts | 32 +++++++++++++-----------
 arch/powerpc/boot/dts/mpc5200b.dtsi |  8 +++---
 arch/powerpc/boot/dts/mucmc52.dts   | 38 +++++++++++++++--------------
 arch/powerpc/boot/dts/o2d.dts       | 12 +++++----
 arch/powerpc/boot/dts/o2d.dtsi      | 14 ++++++-----
 arch/powerpc/boot/dts/o2d300.dts    | 10 +++++---
 arch/powerpc/boot/dts/o2dnt2.dts    | 12 +++++----
 arch/powerpc/boot/dts/o2i.dts       |  4 +--
 arch/powerpc/boot/dts/o2mnt.dts     |  4 +--
 arch/powerpc/boot/dts/o3dnt.dts     | 12 +++++----
 arch/powerpc/boot/dts/pcm030.dts    |  8 +++---
 arch/powerpc/boot/dts/pcm032.dts    | 34 ++++++++++++++------------
 arch/powerpc/boot/dts/tqm5200.dts   | 12 ++++-----
 arch/powerpc/boot/dts/uc101.dts     | 14 ++++++-----
 22 files changed, 195 insertions(+), 164 deletions(-)

Signature · 1 line

2.17.1

Anatolij Gustschin

author

2021-10-13 22:05 UTC #1 lore raw

PATCH 1/4 powerpc/5200: dts: add missing pci ranges

Add ranges property to fix build warnings:
Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge)

Signed-off-by Anatolij Gustschin <[email protected]>

---
 arch/powerpc/boot/dts/mpc5200b.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

arch/powerpc/boot/dts/mpc5200b.dtsi +3 -1

index 648fe31795f4..8c645d2bc455 100644
@@ -276,7 +276,9 @@
 		clock-frequency = <0>; // From boot loader
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		// ranges = need to add
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus: localbus {

Signature · 1 line

2.17.1

Anatolij Gustschin

author

2021-10-13 22:05 UTC #2 lore raw

PATCH 2/4 powerpc/5200: dts: fix pci ranges warnings

In reply to Anatolij Gustschin

Fix ranges property warnings:
pci@f0000d00:ranges: 'oneOf' conditional failed, one must be fixed:

Signed-off-by Anatolij Gustschin <[email protected]>

---
 arch/powerpc/boot/dts/a4m072.dts    | 6 +++---
 arch/powerpc/boot/dts/charon.dts    | 6 +++---
 arch/powerpc/boot/dts/digsy_mtc.dts | 6 +++---
 arch/powerpc/boot/dts/lite5200.dts  | 6 +++---
 arch/powerpc/boot/dts/lite5200b.dts | 6 +++---
 arch/powerpc/boot/dts/media5200.dts | 6 +++---
 arch/powerpc/boot/dts/mucmc52.dts   | 6 +++---
 arch/powerpc/boot/dts/pcm030.dts    | 6 +++---
 arch/powerpc/boot/dts/pcm032.dts    | 6 +++---
 arch/powerpc/boot/dts/tqm5200.dts   | 6 +++---
 10 files changed, 30 insertions(+), 30 deletions(-)

arch/powerpc/boot/dts/a4m072.dts +3 -3

index a9cef5726422..d4270a2ec6c7 100644
@@ -140,8 +140,8 @@
 		clock-frequency = <0>; /* From boot loader */
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 };

arch/powerpc/boot/dts/charon.dts +3 -3

index 408b486b13df..6f9fe88a5f36 100644
@@ -225,8 +225,8 @@
 		clock-frequency = <0>; // From boot loader
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 };

arch/powerpc/boot/dts/digsy_mtc.dts +3 -3

index 0e5e9d3acf79..010156649bfe 100644
@@ -98,9 +98,9 @@
 		clock-frequency = <0>; // From boot loader
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {

arch/powerpc/boot/dts/lite5200.dts +3 -3

index cb2782dd6132..84a12e7915e9 100644
@@ -283,9 +283,9 @@
 		clock-frequency = <0>; // From boot loader
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
 	localbus {

arch/powerpc/boot/dts/lite5200b.dts +3 -3

index 2b86c81f9048..c361c59a9681 100644
@@ -116,9 +116,9 @@
 		clock-frequency = <0>; // From boot loader
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
 	localbus {

arch/powerpc/boot/dts/media5200.dts +3 -3

index 61cae9dcddef..f7d7538eb69d 100644
@@ -96,9 +96,9 @@
 
 				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
 				>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 		interrupt-parent = <&mpc5200_pic>;
 	};

arch/powerpc/boot/dts/mucmc52.dts +3 -3

index c6c66306308d..e88a7bd4034d 100644
@@ -106,9 +106,9 @@
 				0x8000 0 0 3 &mpc5200_pic 0 2 3
 				0x8000 0 0 4 &mpc5200_pic 0 1 3
 				>;
-		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {

arch/powerpc/boot/dts/pcm030.dts +3 -3

index b1bc731f7afd..5cee474dcc4c 100644
@@ -90,9 +90,9 @@
 				 0xc800 0 0 2 &mpc5200_pic 1 2 3
 				 0xc800 0 0 3 &mpc5200_pic 1 3 3
 				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
 	localbus {

arch/powerpc/boot/dts/pcm032.dts +3 -3

index 780e13d99e7b..b6fdf861c7d6 100644
@@ -87,9 +87,9 @@
 				 0xc800 0 0 2 &mpc5200_pic 1 2 3
 				 0xc800 0 0 3 &mpc5200_pic 1 3 3
 				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
 	localbus {

arch/powerpc/boot/dts/tqm5200.dts +3 -3

index 9ed0bc78967e..40b139d92a19 100644
@@ -200,8 +200,8 @@
 		clock-frequency = <0>; // From boot loader
 		interrupts = <2 8 0 2 9 0 2 10 0>;
 		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 };

Signature · 1 line

2.17.1

Anatolij Gustschin

author

2021-10-13 22:05 UTC #3 lore raw

PATCH 3/4 powerpc/5200: dts: fix memory node unit name

In reply to Anatolij Gustschin

Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

Signed-off-by Anatolij Gustschin <[email protected]>

---
 arch/powerpc/boot/dts/charon.dts    | 2 +-
 arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
 arch/powerpc/boot/dts/lite5200.dts  | 2 +-
 arch/powerpc/boot/dts/lite5200b.dts | 2 +-
 arch/powerpc/boot/dts/media5200.dts | 2 +-
 arch/powerpc/boot/dts/mpc5200b.dtsi | 2 +-
 arch/powerpc/boot/dts/o2d.dts       | 2 +-
 arch/powerpc/boot/dts/o2d.dtsi      | 2 +-
 arch/powerpc/boot/dts/o2dnt2.dts    | 2 +-
 arch/powerpc/boot/dts/o3dnt.dts     | 2 +-
 arch/powerpc/boot/dts/pcm032.dts    | 2 +-
 arch/powerpc/boot/dts/tqm5200.dts   | 2 +-
 12 files changed, 12 insertions(+), 12 deletions(-)

arch/powerpc/boot/dts/charon.dts +1 -1

index 6f9fe88a5f36..ea6e76ae2545 100644
@@ -35,7 +35,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;	// 128MB
 	};

arch/powerpc/boot/dts/digsy_mtc.dts +1 -1

index 010156649bfe..57024a4c1e7d 100644
@@ -16,7 +16,7 @@
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x02000000>;	// 32MB
 	};

arch/powerpc/boot/dts/lite5200.dts +1 -1

index 84a12e7915e9..b9d8487813b4 100644
@@ -32,7 +32,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};

arch/powerpc/boot/dts/lite5200b.dts +1 -1

index c361c59a9681..7e2d91c7cb66 100644
@@ -31,7 +31,7 @@
 		led4 { gpios = <&gpio_simple 2 1>; };
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};

arch/powerpc/boot/dts/media5200.dts +1 -1

index f7d7538eb69d..96524ede16cd 100644
@@ -32,7 +32,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;	// 128MB RAM
 	};

arch/powerpc/boot/dts/mpc5200b.dtsi +1 -1

index 8c645d2bc455..ffa82c7e1055 100644
@@ -33,7 +33,7 @@
 		};
 	};
 
-	memory: memory {
+	memory: memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};

arch/powerpc/boot/dts/o2d.dts +1 -1

index 24a46f65e529..e0a8d3034417 100644
@@ -12,7 +12,7 @@
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;  // 128MB
 	};

arch/powerpc/boot/dts/o2d.dtsi +1 -1

index 6661955a2be4..b55a9e5bd828 100644
@@ -19,7 +19,7 @@
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};

arch/powerpc/boot/dts/o2dnt2.dts +1 -1

index eeba7f5507d5..c2eedbd1f5fc 100644
@@ -12,7 +12,7 @@
 	model = "ifm,o2dnt2";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;  // 128MB
 	};

arch/powerpc/boot/dts/o3dnt.dts +1 -1

index fd00396b0593..e4c1bdd41271 100644
@@ -12,7 +12,7 @@
 	model = "ifm,o3dnt";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x04000000>;  // 64MB
 	};

arch/powerpc/boot/dts/pcm032.dts +1 -1

index b6fdf861c7d6..d00f13b62510 100644
@@ -20,7 +20,7 @@
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;	// 128MB
 	};

arch/powerpc/boot/dts/tqm5200.dts +1 -1

index 40b139d92a19..372177b19e60 100644
@@ -32,7 +32,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};

Signature · 1 line

2.17.1

Anatolij Gustschin

author

2021-10-13 22:05 UTC #4 lore raw

PATCH 4/4 powerpc/5200: dts: fix localbus node warnings

In reply to Anatolij Gustschin

Fix build warnings like:
localbus:ranges: 'oneOf' conditional failed, one must be fixed
...
Warning (unit_address_vs_reg): /localbus: node has a reg or ranges property, but no unit name Warning (simple_bus_reg): /localbus/flash@0,0: simple-bus unit address format error, expected "0"

Signed-off-by Anatolij Gustschin <[email protected]>

---
 arch/powerpc/boot/dts/a3m071.dts    | 12 +++++-----
 arch/powerpc/boot/dts/a4m072.dts    | 20 ++++++++---------
 arch/powerpc/boot/dts/charon.dts    | 14 ++++++------
 arch/powerpc/boot/dts/cm5200.dts    |  7 ++++--
 arch/powerpc/boot/dts/digsy_mtc.dts | 16 ++++++++------
 arch/powerpc/boot/dts/lite5200.dts  |  4 ++--
 arch/powerpc/boot/dts/lite5200b.dts |  6 +++--
 arch/powerpc/boot/dts/media5200.dts | 20 +++++++++--------
 arch/powerpc/boot/dts/motionpro.dts | 32 +++++++++++++++------------
 arch/powerpc/boot/dts/mpc5200b.dtsi |  2 +-
 arch/powerpc/boot/dts/mucmc52.dts   | 34 +++++++++++++++--------------
 arch/powerpc/boot/dts/o2d.dts       | 10 +++++----
 arch/powerpc/boot/dts/o2d.dtsi      | 12 +++++-----
 arch/powerpc/boot/dts/o2d300.dts    | 10 +++++----
 arch/powerpc/boot/dts/o2dnt2.dts    | 10 +++++----
 arch/powerpc/boot/dts/o2i.dts       |  4 ++--
 arch/powerpc/boot/dts/o2mnt.dts     |  4 ++--
 arch/powerpc/boot/dts/o3dnt.dts     | 10 +++++----
 arch/powerpc/boot/dts/pcm030.dts    |  2 +-
 arch/powerpc/boot/dts/pcm032.dts    | 26 ++++++++++++----------
 arch/powerpc/boot/dts/tqm5200.dts   |  4 ++--
 arch/powerpc/boot/dts/uc101.dts     | 14 +++++++-----
 22 files changed, 151 insertions(+), 122 deletions(-)

arch/powerpc/boot/dts/a3m071.dts +6 -6

index 034cfd8aa95b..14e59aaa0ba7 100644
@@ -87,15 +87,15 @@
 		};
 	};
 
-	localbus {
+	localbus@80000000 {
 		compatible = "fsl,mpc5200b-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe9000000 0x00080000
-			  5 0 0xe8000000 0x00010000>;
+		ranges = <0 0 0xfc000000 0x02000000>,
+			 <3 0 0xe9000000 0x00080000>,
+			 <5 0 0xe8000000 0x00010000>;
 
-		flash@0,0 {
+		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0 0x0 0x02000000>;

@@ -124,7 +124,7 @@
 			};
 		};
 
-		fpga@3,0 {
+		fpga@300000000 {
 			compatible = "anonymous,a3m071-fpga";
 			reg = <3 0x0 0x00080000
 			       5 0x0 0x00010000>;

arch/powerpc/boot/dts/a4m072.dts +10 ~~-10~~

index d4270a2ec6c7..dede711957da 100644
@@ -98,25 +98,25 @@
 		};
 	};
 
-	localbus {
+	localbus@80000000 {
 		compatible = "fsl,mpc5200b-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <0 0 0xfe000000 0x02000000
-			  1 0 0x62000000 0x00400000
-			  2 0 0x64000000 0x00200000
-			  3 0 0x66000000 0x01000000
-			  6 0 0x68000000 0x01000000
-			  7 0 0x6a000000 0x00000004>;
-
-		flash@0,0 {
+		ranges = <0 0 0xfe000000 0x02000000>,
+			 <1 0 0x62000000 0x00400000>,
+			 <2 0 0x64000000 0x00200000>,
+			 <3 0 0x66000000 0x01000000>,
+			 <6 0 0x68000000 0x01000000>,
+			 <7 0 0x6a000000 0x00000004>;
+
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <2>;
 			#size-cells = <1>;
 			#address-cells = <1>;
 		};
-		sram0@1,0 {
+		sram0@100000000 {
 			compatible = "mtd-ram";
 			reg = <1 0x00000 0x00400000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/charon.dts +7 -7

index ea6e76ae2545..2e3518909321 100644
@@ -177,15 +177,15 @@
 		};
 	};
 
-	localbus {
+	localbus@80000000 {
 		compatible = "fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <	0 0 0xfc000000 0x02000000
-				1 0 0xe0000000 0x04000000 // CS1 range, SM501
-				3 0 0xe8000000 0x00080000>;
+		ranges = <0 0 0xfc000000 0x02000000>,
+			 <1 0 0xe0000000 0x04000000>, // CS1 range, SM501
+			 <3 0 0xe8000000 0x00080000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <4>;

@@ -194,7 +194,7 @@
 			#address-cells = <1>;
 		};
 
-		display@1,0 {
+		display@100000000 {
 			compatible = "smi,sm501";
 			reg = <1 0x00000000 0x00800000
 			       1 0x03e00000 0x00200000>;

@@ -203,7 +203,7 @@
 			little-endian;
 		};
 
-		mram0@3,0 {
+		mram0@300000000 {
 			compatible = "mtd-ram";
 			reg = <3 0x00000 0x80000>;
 			bank-width = <1>;

arch/powerpc/boot/dts/cm5200.dts +5 -2

index 66cae7be60c4..196f412f2c32 100644
@@ -71,9 +71,12 @@
 		status = "disabled";
 	};
 
-	localbus {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
 		// 16-bit flash device at LocalPlus Bus CS0
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x2000000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/digsy_mtc.dts +9 -7

index 57024a4c1e7d..28355f037e1b 100644
@@ -103,12 +103,14 @@
 			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
-	localbus {
-		ranges = <0 0 0xff000000 0x1000000
-			  4 0 0x60000000 0x0001000>;
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xff000000 0x1000000>,
+			 <4 0 0x60000000 0x0001000>;
 
 		// 16-bit flash device at LocalPlus Bus CS0
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x1000000>;
 			bank-width = <2>;

@@ -134,21 +136,21 @@
 			};
 		};
 
-		can@4,0 {
+		can@400000000 {
 			compatible = "nxp,sja1000";
 			reg = <4 0x000 0x80>;
 			nxp,external-clock-frequency = <24000000>;
 			interrupts = <1 2 3>; // Level-low
 		};
 
-		can@4,100 {
+		can@400000100 {
 			compatible = "nxp,sja1000";
 			reg = <4 0x100 0x80>;
 			nxp,external-clock-frequency = <24000000>;
 			interrupts = <1 2 3>;  // Level-low
 		};
 
-		serial@4,200 {
+		serial@400000200 {
 			compatible = "nxp,sc28l92";
 			reg = <4 0x200 0x10>;
 			interrupts = <1 3 3>;

arch/powerpc/boot/dts/lite5200.dts +2 -2

index b9d8487813b4..4316669dc5bb 100644
@@ -288,14 +288,14 @@
 			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
-	localbus {
+	localbus@80000000 {
 		compatible = "fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 
 		ranges = <0 0 0xff000000 0x01000000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "amd,am29lv652d", "cfi-flash";
 			reg = <0 0 0x01000000>;
 			bank-width = <1>;

arch/powerpc/boot/dts/lite5200b.dts +4 -2

index 7e2d91c7cb66..f31825477703 100644
@@ -121,10 +121,12 @@
 			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
-	localbus {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
 		ranges = <0 0 0xfe000000 0x02000000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <1>;

arch/powerpc/boot/dts/media5200.dts +11 -9

index 96524ede16cd..e4bca32dbf10 100644
@@ -102,26 +102,28 @@
 		interrupt-parent = <&mpc5200_pic>;
 	};
 
-	localbus {
-		ranges = < 0 0 0xfc000000 0x02000000
-			   1 0 0xfe000000 0x02000000
-			   2 0 0xf0010000 0x00010000
-			   3 0 0xf0020000 0x00010000 >;
-		flash@0,0 {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000>,
+			 <1 0 0xfe000000 0x02000000>,
+			 <2 0 0xf0010000 0x00010000>,
+			 <3 0 0xf0020000 0x00010000>;
+		flash@0 {
 			compatible = "amd,am29lv28ml", "cfi-flash";
 			reg = <0 0x0 0x2000000>;                // 32 MB
 			bank-width = <4>;                       // Width in bytes of the flash bank
 			device-width = <2>;                     // Two devices on each bank
 		};
 
-		flash@1,0 {
+		flash@100000000 {
 			compatible = "amd,am29lv28ml", "cfi-flash";
 			reg = <1 0 0x2000000>;                  // 32 MB
 			bank-width = <4>;                       // Width in bytes of the flash bank
 			device-width = <2>;                     // Two devices on each bank
 		};
 
-		media5200_fpga: fpga@2,0 {
+		media5200_fpga: fpga@200000000 {
 			compatible = "fsl,media5200-fpga";
 			interrupt-controller;
 			#interrupt-cells = <2>;	// 0:bank 1:id; no type field

@@ -132,7 +134,7 @@
 			              1 1 3>;	// IRQ bank 1
 		};
 
-		uart@3,0 {
+		uart@300000000 {
 			compatible = "ti,tl16c752bpt";
 			reg = <3 0 0x10000>;
 			interrupt-parent = <&media5200_fpga>;

arch/powerpc/boot/dts/motionpro.dts +18 ~~-14~~

index c23676093da8..09f0eaa4ad49 100644
@@ -85,41 +85,45 @@
 		status = "disabled";
 	};
 
-	localbus {
-		ranges = <0 0 0xff000000 0x01000000
-			  1 0 0x50000000 0x00010000
-			  2 0 0x50010000 0x00010000
-			  3 0 0x50020000 0x00010000>;
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xff000000 0x01000000>,
+			 <1 0 0x50000000 0x00010000>,
+			 <2 0 0x50010000 0x00010000>,
+			 <3 0 0x50020000 0x00010000>;
 
 		// 8-bit DualPort SRAM on LocalPlus Bus CS1
-		kollmorgen@1,0 {
+		kollmorgen@100000000 {
 			compatible = "promess,motionpro-kollmorgen";
 			reg = <1 0 0x10000>;
 			interrupts = <1 1 0>;
 		};
 
 		// 8-bit board CPLD on LocalPlus Bus CS2
-		cpld@2,0 {
+		cpld@200000000 {
 			compatible = "promess,motionpro-cpld";
 			reg = <2 0 0x10000>;
 		};
 
 		// 8-bit custom Anybus Module on LocalPlus Bus CS3
-		anybus@3,0 {
+		anybus@300000000 {
 			compatible = "promess,motionpro-anybus";
 			reg = <3 0 0x10000>;
 		};
-		pro_module_general@3,0 {
-			compatible = "promess,pro_module_general";
-			reg = <3 0 3>;
-		};
-		pro_module_dio@3,800 {
+		/*
+		 * pro_module_general@300000000 {
+		 *	compatible = "promess,pro_module_general";
+		 *	reg = <3 0 3>;
+		 * };
+		 */
+		pro_module_dio@300000800 {
 			compatible = "promess,pro_module_dio";
 			reg = <3 0x800 2>;
 		};
 
 		// 16-bit flash device at LocalPlus Bus CS0
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x01000000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/mpc5200b.dtsi +1 -1

index ffa82c7e1055..5083661bce40 100644
@@ -281,7 +281,7 @@
 			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
-	localbus: localbus {
+	localbus: localbus@80000000 {
 		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;

arch/powerpc/boot/dts/mucmc52.dts +18 ~~-16~~

index e88a7bd4034d..0bf4f1a5bb19 100644
@@ -111,12 +111,14 @@
 			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
-	localbus {
-		ranges = <0 0 0xff800000 0x00800000
-			  1 0 0x80000000 0x00800000
-			  3 0 0x80000000 0x00800000>;
-
-		flash@0,0 {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xff800000 0x00800000>,
+			 <1 0 0x80000000 0x00800000>,
+			 <3 0 0x80000000 0x00800000>;
+
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x00800000>;
 			bank-width = <4>;

@@ -157,61 +159,61 @@
 			};
 		};
 
-		simple100: gpio-controller-100@3,600100 {
+		simple100: gpio-controller-100@300600100 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600100 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple104: gpio-controller-104@3,600104 {
+		simple104: gpio-controller-104@300600104 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600104 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple200: gpio-controller-200@3,600200 {
+		simple200: gpio-controller-200@300600200 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600200 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple201: gpio-controller-201@3,600201 {
+		simple201: gpio-controller-201@300600201 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600201 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple202: gpio-controller-202@3,600202 {
+		simple202: gpio-controller-202@300600202 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600202 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple203: gpio-controller-203@3,600203 {
+		simple203: gpio-controller-203@300600203 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600203 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple204: gpio-controller-204@3,600204 {
+		simple204: gpio-controller-204@300600204 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600204 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple206: gpio-controller-206@3,600206 {
+		simple206: gpio-controller-206@300600206 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600206 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple207: gpio-controller-207@3,600207 {
+		simple207: gpio-controller-207@300600207 {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x00600207 0x1>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
-		simple20f: gpio-controller-20f@3,60020f {
+		simple20f: gpio-controller-20f@30060020f {
 			compatible = "manroland,mucmc52-aux-gpio";
 			reg = <3 0x0060020f 0x1>;
 			gpio-controller;

arch/powerpc/boot/dts/o2d.dts +6 -4

index e0a8d3034417..fc7e8b46f058 100644
@@ -16,11 +16,13 @@
 		reg = <0x00000000 0x08000000>;  // 128MB
 	};
 
-	localbus {
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe3000000 0x00100000>;
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000>,
+			 <3 0 0xe3000000 0x00100000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/o2d.dtsi +7 -5

index b55a9e5bd828..898fe08a9fd0 100644
@@ -73,12 +73,14 @@
 		};
 	};
 
-	localbus {
-		ranges = <0 0 0xff000000 0x01000000
-			  3 0 0xe3000000 0x00100000>;
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xff000000 0x01000000>,
+			 <3 0 0xe3000000 0x00100000>;
 
 		// flash device at LocalPlus Bus CS0
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x01000000>;
 			bank-width = <1>;

@@ -100,7 +102,7 @@
 			};
 		};
 
-		csi@3,0 {
+		csi@300000000 {
 			compatible = "ifm,o2d-csi";
 			reg = <3 0 0x00100000>;
 			ifm,csi-clk-handle = <&gpt7>;

arch/powerpc/boot/dts/o2d300.dts +6 -4

index 55a25b700bed..f0faa73b786c 100644
@@ -12,10 +12,12 @@
 	model = "ifm,o2d300";
 	compatible = "ifm,o2d";
 
-	localbus {
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe3000000 0x00100000>;
-		flash@0,0 {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000>,
+			 <3 0 0xe3000000 0x00100000>;
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/o2dnt2.dts +6 -4

index c2eedbd1f5fc..ba2556fc227e 100644
@@ -16,11 +16,13 @@
 		reg = <0x00000000 0x08000000>;  // 128MB
 	};
 
-	localbus {
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe3000000 0x00100000>;
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000>,
+			 <3 0 0xe3000000 0x00100000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/o2i.dts +2 -2

index 3fb2e0ad7387..971be0d3b18e 100644
@@ -12,8 +12,8 @@
 	model = "ifm,o2i";
 	compatible = "ifm,o2d";
 
-	localbus {
-		flash@0,0 {
+	localbus@80000000 {
+		flash@0 {
 			partition@60000 {
 				label = "kernel";
 				reg = <0x00060000 0x00260000>;

arch/powerpc/boot/dts/o2mnt.dts +2 -2

index c5e0ba6e8f2b..42056a8fe35c 100644
@@ -12,8 +12,8 @@
 	model = "ifm,o2mnt";
 	compatible = "ifm,o2d";
 
-	localbus {
-		flash@0,0 {
+	localbus@80000000 {
+		flash@0 {
 			partition@60000 {
 				label = "kernel";
 				reg = <0x00060000 0x00260000>;

arch/powerpc/boot/dts/o3dnt.dts +6 -4

index e4c1bdd41271..7cfcc0a9c89b 100644
@@ -16,11 +16,13 @@
 		reg = <0x00000000 0x04000000>;  // 64MB
 	};
 
-	localbus {
-		ranges = <0 0 0xfc000000 0x01000000
-			  3 0 0xe3000000 0x00100000>;
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x01000000>,
+			 <3 0 0xe3000000 0x00100000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x01000000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/pcm030.dts +1 -1

index 5cee474dcc4c..a4146b616b03 100644
@@ -95,7 +95,7 @@
 			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
-	localbus {
+	localbus@80000000 {
 		status = "disabled";
 	};

arch/powerpc/boot/dts/pcm032.dts +14 ~~-12~~

index d00f13b62510..ea36ef5cdd02 100644
@@ -92,17 +92,19 @@
 			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
-	localbus {
-		ranges = <0 0 0xfe000000 0x02000000
-			  1 0 0xfc000000 0x02000000
-			  2 0 0xfbe00000 0x00200000
-			  3 0 0xf9e00000 0x02000000
-			  4 0 0xf7e00000 0x02000000
-			  5 0 0xe6000000 0x02000000
-			  6 0 0xe8000000 0x02000000
-			  7 0 0xea000000 0x02000000>;
-
-		flash@0,0 {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000>,
+			 <1 0 0xfc000000 0x02000000>,
+			 <2 0 0xfbe00000 0x00200000>,
+			 <3 0 0xf9e00000 0x02000000>,
+			 <4 0 0xf7e00000 0x02000000>,
+			 <5 0 0xe6000000 0x02000000>,
+			 <6 0 0xe8000000 0x02000000>,
+			 <7 0 0xea000000 0x02000000>;
+
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <4>;

@@ -139,7 +141,7 @@
 			};
 		};
 
-		sram@2,0 {
+		sram@200000000 {
 			compatible = "mtd-ram";
 			reg = <2 0 0x00200000>;
 			bank-width = <2>;

arch/powerpc/boot/dts/tqm5200.dts +2 -2

index 372177b19e60..24e97056b8e3 100644
@@ -169,13 +169,13 @@
 		};
 	};
 
-	localbus {
+	localbus@80000000 {
 		compatible = "fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xfc000000 0x02000000>;
 
-		flash@0,0 {
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x02000000>;
 			bank-width = <4>;

arch/powerpc/boot/dts/uc101.dts +8 -6

index 2e34d019178b..c752712bcdbb 100644
@@ -101,12 +101,14 @@
 		status = "disabled";
 	};
 
-	localbus {
-		ranges = <0 0 0xff800000 0x00800000
-			  1 0 0x80000000 0x00800000
-			  3 0 0x80000000 0x00800000>;
-
-		flash@0,0 {
+	localbus@80000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xff800000 0x00800000>,
+			 <1 0 0x80000000 0x00800000>,
+			 <3 0 0x80000000 0x00800000>;
+
+		flash@0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x00800000>;
 			bank-width = <2>;

Signature · 1 line

2.17.1

Rob Herring

2021-10-15 16:32 UTC #5 lore raw

Re: [PATCH 4/4] powerpc/5200: dts: fix localbus node warnings

Quoted 38 lines · Anatolij Gustschin

Signed-off-by Anatolij Gustschin <[email protected]>

---
 arch/powerpc/boot/dts/a3m071.dts    | 12 +++++-----
 arch/powerpc/boot/dts/a4m072.dts    | 20 ++++++++---------
 arch/powerpc/boot/dts/charon.dts    | 14 ++++++------
 arch/powerpc/boot/dts/cm5200.dts    |  7 ++++--
 arch/powerpc/boot/dts/digsy_mtc.dts | 16 ++++++++------
 arch/powerpc/boot/dts/lite5200.dts  |  4 ++--
 arch/powerpc/boot/dts/lite5200b.dts |  6 +++--
 arch/powerpc/boot/dts/media5200.dts | 20 +++++++++--------
 arch/powerpc/boot/dts/motionpro.dts | 32 +++++++++++++++------------
 arch/powerpc/boot/dts/mpc5200b.dtsi |  2 +-
 arch/powerpc/boot/dts/mucmc52.dts   | 34 +++++++++++++++--------------
 arch/powerpc/boot/dts/o2d.dts       | 10 +++++----
 arch/powerpc/boot/dts/o2d.dtsi      | 12 +++++-----
 arch/powerpc/boot/dts/o2d300.dts    | 10 +++++----
 arch/powerpc/boot/dts/o2dnt2.dts    | 10 +++++----
 arch/powerpc/boot/dts/o2i.dts       |  4 ++--
 arch/powerpc/boot/dts/o2mnt.dts     |  4 ++--
 arch/powerpc/boot/dts/o3dnt.dts     | 10 +++++----
 arch/powerpc/boot/dts/pcm030.dts    |  2 +-
 arch/powerpc/boot/dts/pcm032.dts    | 26 ++++++++++++----------
 arch/powerpc/boot/dts/tqm5200.dts   |  4 ++--
 arch/powerpc/boot/dts/uc101.dts     | 14 +++++++-----
 22 files changed, 151 insertions(+), 122 deletions(-)

arch/powerpc/boot/dts/a3m071.dts +0 -0

index 034cfd8aa95b..14e59aaa0ba7 100644

arch/powerpc/boot/dts/a3m071.dts line 90

Quoted 5 lines

arch/powerpc/boot/dts/a3m071.dts +1 -1

@@ -87,15 +87,15 @@
                };
        };
 
-       localbus {
+       localbus@80000000 {

That's not right, as 0x80000000 doesn't exist in 'reg' or 'ranges'. Without 'reg', the correct unit-address is 'fc000000'. Perhaps there should be a 'reg' entry though.

arch/powerpc/boot/dts/a3m071.dts line 98

Quoted 12 lines

arch/powerpc/boot/dts/a3m071.dts +4 -4

                compatible = "fsl,mpc5200b-lpb","simple-bus";
                #address-cells = <2>;
                #size-cells = <1>;
-               ranges = <0 0 0xfc000000 0x02000000
-                         3 0 0xe9000000 0x00080000
-                         5 0 0xe8000000 0x00010000>;
+               ranges = <0 0 0xfc000000 0x02000000>,
+                        <3 0 0xe9000000 0x00080000>,
+                        <5 0 0xe8000000 0x00010000>;
 
-               flash@0,0 {
+               flash@0 {

This change is debatable. Normally, if we have chipselects, then that's a separate field and a comma is appropriate. However, h/w with chip selects require setup and aren't a simple-bus. I guess the bootloader does the setup, so kind of a gray area.

The warning for this is off by default, so I'd leave it alone.

Rob

Rob Herring

Reviewed-by on the v1 series

2021-10-15 16:34 UTC #6 lore raw

In reply to Anatolij Gustschin

Quoted 10 lines · Anatolij Gustschin

This series fixes localbus, memory and pci node build warnings. It was tested with current linux-next on digsy_mtc and tqm5200 boards.
Anatolij Gustschin (4):
powerpc/5200: dts: add missing pci ranges
powerpc/5200: dts: fix pci ranges warnings
powerpc/5200: dts: fix memory node unit name
powerpc/5200: dts: fix localbus node warnings

For patches 1-3:

Reviewed-by Rob Herring <[email protected]>

Michael Ellerman

2021-11-02 11:38 UTC #7 lore raw

In reply to Anatolij Gustschin

Quoted 11 lines · Anatolij Gustschin

This series fixes localbus, memory and pci node build warnings. It was tested with current linux-next on digsy_mtc and tqm5200 boards.
Anatolij Gustschin (4):
powerpc/5200: dts: add missing pci ranges
powerpc/5200: dts: fix pci ranges warnings
powerpc/5200: dts: fix memory node unit name
powerpc/5200: dts: fix localbus node warnings
[...]

Patches 1-3 applied to powerpc/next.

[1/4] powerpc/5200: dts: add missing pci ranges

      https://git.kernel.org/powerpc/c/e9efabc6e4c31517394be13c2f0c5abadd33f328
[2/4] powerpc/5200: dts: fix pci ranges warnings
      https://git.kernel.org/powerpc/c/7855b6c66dc458e2f5abfb2b50f527ea4101df77
[3/4] powerpc/5200: dts: fix memory node unit name
      https://git.kernel.org/powerpc/c/aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1

cheers