4.19.213-rc1 review

This is the start of the stable review cycle for the 4.19.213 release. There are 50 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 20 Oct 2021 13:23:15 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.213-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.213-rc1

Vegard Nossum <[email protected]>
r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256

chongjiapeng <[email protected]>
qed: Fix missing error code in qed_slowpath_start()

Sebastian Andrzej Siewior <[email protected]>
mqprio: Correct stats in mqprio_dump_class_stats().

Jackie Liu <[email protected]>
acpi/arm64: fix next_platform_timer() section mismatch error

Dan Carpenter <[email protected]>
drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling

Dan Carpenter <[email protected]>
drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()

Dmitry Baryshkov <[email protected]>
drm/msm/mdp5: fix cursor-related warnings

Colin Ian King <[email protected]>
drm/msm: Fix null pointer dereference on pointer edp

Vadim Pasternak <[email protected]>
platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call

Dan Carpenter <[email protected]>
pata_legacy: fix a couple uninitialized variable bugs

Ziyang Xuan <[email protected]>
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()

Ziyang Xuan <[email protected]>
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()

Ziyang Xuan <[email protected]>
nfc: fix error handling of nfc_proto_register()

Arnd Bergmann <[email protected]>
ethernet: s2io: fix setting mac address during resume

Nanyong Sun <[email protected]>

    net: encx24j600: check error in devm_regmap_init_encx24j600

Vegard Nossum <[email protected]>
net: korina: select CRC32

Vegard Nossum <[email protected]>
net: arc: select CRC32

Eiichi Tsukata <[email protected]>
sctp: account stream padding length for reconf chunk

Dan Carpenter <[email protected]>
iio: dac: ti-dac5571: fix an error code in probe()

Dan Carpenter <[email protected]>
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()

Dan Carpenter <[email protected]>
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()

Jiri Valek - 2N <[email protected]>
iio: light: opt3001: Fixed timeout error when 0 lux

Christophe JAILLET <[email protected]>
iio: adc128s052: Fix the error handling path of 'adc128_probe()'

Billy Tsai <[email protected]>
iio: adc: aspeed: set driver data when adc probe.

Borislav Petkov <[email protected]>
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically

Stephen Boyd <[email protected]>
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells

Halil Pasic <[email protected]>
virtio: write back F_VERSION_1 before validate

Tomaz Solc <[email protected]>
USB: serial: option: add prod. id for Quectel EG91

Daniele Palmas <[email protected]>

    USB: serial: option: add Telit LE910Cx composition 0x1204

Yu-Tung Chang <[email protected]>
USB: serial: option: add Quectel EC200S-CN module support

Aleksander Morgado <[email protected]>
USB: serial: qcserial: add EM9191 QDL support

Michael Cullen <[email protected]>
Input: xpad - add support for another USB ID of Nacon GC-100

Miquel Raynal <[email protected]>
usb: musb: dsps: Fix the probe error path

Zhang Jianhua <[email protected]>
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()

Ard Biesheuvel <[email protected]>
efi/cper: use stack buffer for error record decoding

Arnd Bergmann <[email protected]>
cb710: avoid NULL pointer subtraction

Nikolay Martynov <[email protected]>
xhci: Enable trust tx length quirk for Fresco FL11 USB controller

Pavankumar Kondeti <[email protected]>
xhci: Fix command ring pointer corruption while aborting a command

Jonathan Bell <[email protected]>
xhci: guard accesses to ep_state in xhci_endpoint_reset()

Andy Shevchenko <[email protected]>
mei: me: add Ice Lake-N device id.

James Morse <[email protected]>
x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails

Filipe Manana <[email protected]>
btrfs: check for error when looking up inode during dir entry replay

Filipe Manana <[email protected]>
btrfs: deal with errors when adding inode reference during log replay

Filipe Manana <[email protected]>
btrfs: deal with errors when replaying dir entry during log replay

Roberto Sassu <[email protected]>
s390: fix strrchr() implementation

Steven Rostedt <[email protected]>
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'

Kailang Yang <[email protected]>
ALSA: hda/realtek - ALC236 headset MIC recording issue

Werner Sembach <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo X170KM-G

Werner Sembach <[email protected]>
ALSA: hda/realtek: Complete partial device name to avoid ambiguity

Takashi Iwai <[email protected]>
ALSA: seq: Fix a potential UAF by wrong private_free call order

-------------

Diffstat:

 Makefile                                           |  4 +--
 arch/s390/lib/string.c                             | 15 +++++-----
 arch/x86/Kconfig                                   |  1 -
 arch/x86/kernel/cpu/intel_rdt.c                    |  2 ++
 drivers/acpi/arm64/gtdt.c                          |  2 +-
 drivers/ata/pata_legacy.c                          |  6 ++--
 drivers/firmware/efi/cper.c                        |  4 +--
 drivers/firmware/efi/runtime-wrappers.c            |  2 +-
 drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c          | 16 +++++++++++
 drivers/gpu/drm/msm/dsi/dsi.c                      |  4 ++-
 drivers/gpu/drm/msm/dsi/dsi_host.c                 |  2 +-
 drivers/gpu/drm/msm/edp/edp_ctrl.c                 |  3 +-
 drivers/iio/adc/aspeed_adc.c                       |  1 +
 drivers/iio/adc/ti-adc128s052.c                    |  6 ++++
 drivers/iio/common/ssp_sensors/ssp_spi.c           | 11 ++++++--
 drivers/iio/dac/ti-dac5571.c                       |  1 +
 drivers/iio/light/opt3001.c                        |  6 ++--
 drivers/input/joystick/xpad.c                      |  2 ++
 drivers/misc/cb710/sgbuf2.c                        |  2 +-
 drivers/misc/mei/hw-me-regs.h                      |  1 +
 drivers/misc/mei/pci-me.c                          |  1 +
 drivers/net/ethernet/Kconfig                       |  1 +
 drivers/net/ethernet/arc/Kconfig                   |  1 +
 drivers/net/ethernet/microchip/encx24j600-regmap.c | 10 +++++--
 drivers/net/ethernet/microchip/encx24j600.c        |  5 +++-
 drivers/net/ethernet/microchip/encx24j600_hw.h     |  4 +--
 drivers/net/ethernet/neterion/s2io.c               |  2 +-
 drivers/net/ethernet/qlogic/qed/qed_main.c         |  1 +
 drivers/net/usb/Kconfig                            |  4 +++
 drivers/nvmem/core.c                               |  3 +-
 drivers/platform/mellanox/mlxreg-io.c              |  2 +-
 drivers/usb/host/xhci-pci.c                        |  2 ++
 drivers/usb/host/xhci-ring.c                       | 14 +++++++---
 drivers/usb/host/xhci.c                            |  5 ++++
 drivers/usb/musb/musb_dsps.c                       |  4 ++-
 drivers/usb/serial/option.c                        |  8 ++++++
 drivers/usb/serial/qcserial.c                      |  1 +
 drivers/virtio/virtio.c                            | 11 ++++++++
 fs/btrfs/tree-log.c                                | 32 +++++++++++++++-------
 net/nfc/af_nfc.c                                   |  3 ++
 net/nfc/digital_core.c                             |  9 ++++--
 net/nfc/digital_technology.c                       |  8 ++++--
 net/sched/sch_mqprio.c                             | 30 ++++++++++++--------
 net/sctp/sm_make_chunk.c                           |  2 +-
 scripts/recordmcount.pl                            |  2 +-
 sound/core/seq_device.c                            |  8 ++----
 sound/pci/hda/patch_realtek.c                      |  8 ++++--
 47 files changed, 198 insertions(+), 74 deletions(-)

From: Takashi Iwai <[email protected]>

commit 1f8763c59c4ec6254d629fe77c0a52220bd907aa upstream.

John Keeping reported and posted a patch for a potential UAF in rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be called after the associated rawmidi object got already freed. After a deeper look, it turned out that the bug is rather the incorrect private_free call order for a snd_seq_device. The snd_seq_device private_free gets called at the release callback of the sequencer device object, while this was rather expected to be executed at the snd_device call chains that runs at the beginning of the whole card-free procedure. It's been broken since the rewrite of sequencer-device binding (although it hasn't surfaced because the sequencer device release happens usually right along with the card device release).

This patch corrects the private_free call to be done in the right place, at snd_seq_device_dev_free().

---
 sound/core/seq_device.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

@@ -162,6 +162,8 @@ static int snd_seq_device_dev_free(struc
 	struct snd_seq_device *dev = device->device_data;
 
 	cancel_autoload_drivers();
+	if (dev->private_free)
+		dev->private_free(dev);
 	put_device(&dev->dev);
 	return 0;
 }

@@ -189,11 +191,7 @@ static int snd_seq_device_dev_disconnect
 
 static void snd_seq_dev_release(struct device *dev)
 {
-	struct snd_seq_device *sdev = to_seq_dev(dev);
-
-	if (sdev->private_free)
-		sdev->private_free(sdev);
-	kfree(sdev);
+	kfree(to_seq_dev(dev));
 }
 
 /*

From: Werner Sembach <[email protected]>

commit 1f8d398e1cd8813f8ec16d55c086e8270a9c18ab upstream.

The string "Clevo X170" is not enough to unambiguously identify the correct device.

Fixing it so another Clevo barebone name starting with "X170" can be added without causing confusion.

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2523,7 +2523,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
-	SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+	SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1558, 0x9506, "Clevo P955HQ", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1558, 0x950a, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950),

From: Werner Sembach <[email protected]>

commit cc03069a397005da24f6783835c274d5aedf6043 upstream.

This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This fixes the issue of the devices internal Speaker not working.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -2524,6 +2524,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+	SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED),
 	SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1558, 0x9506, "Clevo P955HQ", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1558, 0x950a, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950),

From: Kailang Yang <[email protected]>

commit 5aec98913095ed3b4424ed6c5fdeb6964e9734da upstream.

In power save mode, the recording voice from headset mic will 2s more delay. Add this patch will solve this issue.

[ minor coding style fix by tiwai ]

---
 sound/pci/hda/patch_realtek.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

@@ -519,6 +519,8 @@ static void alc_shutup_pins(struct hda_c
 	struct alc_spec *spec = codec->spec;
 
 	switch (codec->core.vendor_id) {
+	case 0x10ec0236:
+	case 0x10ec0256:
 	case 0x10ec0283:
 	case 0x10ec0286:
 	case 0x10ec0288:

@@ -3365,7 +3367,8 @@ static void alc256_shutup(struct hda_cod
 	/* If disable 3k pulldown control for alc257, the Mic detection will not work correctly
 	 * when booting with headset plugged. So skip setting it for the codec alc257
 	 */
-	if (codec->core.vendor_id != 0x10ec0257)
+	if (spec->codec_variant != ALC269_TYPE_ALC257 &&
+	    spec->codec_variant != ALC269_TYPE_ALC256)
 		alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
 
 	if (!spec->no_shutup_pins)

From: Steven Rostedt <[email protected]>

commit be358af1191b1b2fedebd8f3421cafdc8edacc7d upstream.

I received a build failure for a new patch I'm working on the nds32 architecture, and when I went to test it, I couldn't get to my build error, because it failed to build with a bunch of:

Error: invalid operands (*UND* and *UND* sections) for `^'

issues with various files. Those files were temporary asm files that looked
like: kernel/.tmp_mc_fork.s

I decided to look deeper, and found that the "mc" portion of that name stood for "mcount", and was created by the recordmcount.pl script. One that I wrote over a decade ago. Once I knew the source of the problem, I was able to investigate it further.

The way the recordmcount.pl script works (BTW, there's a C version that simply modifies the ELF object) is by doing an "objdump" on the object file. Looks for all the calls to "mcount", and creates an offset of those locations from some global variable it can use (usually a global function name, found with <.*>:). Creates a asm file that is a table of references to these locations, using the found variable/function. Compiles it and links it back into the original object file. This asm file is called ".tmp_mc_<object_base_name>.s".

The problem here is that the objdump produced by the nds32 object file, contains things that look like:

0000159a <.L3^B1>:

    159a:       c6 00           beqz38 $r6, 159a <.L3^B1>
                        159a: R_NDS32_9_PCREL_RELA      .text+0x159e
    159c:       84 d2           movi55 $r6, #-14
    159e:       80 06           mov55 $r0, $r6
    15a0:       ec 3c           addi10.sp #0x3c

Where ".L3^B1 is somehow selected as the "global" variable to index off of.

Then the assembly file that holds the mcount locations looks like this:

        .section __mcount_loc,"a",@progbits
        .align 2
        .long .L3^B1 + -5522
        .long .L3^B1 + -5384
        .long .L3^B1 + -5270
        .long .L3^B1 + -5098
        .long .L3^B1 + -4970
        .long .L3^B1 + -4758
        .long .L3^B1 + -4122
        [...]

And when it is compiled back to an object to link to the original object, the compile fails on the "^" symbol.

Simple solution for now, is to have the perl script ignore using function symbols that have an "^" in the name.

---
 scripts/recordmcount.pl |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -222,7 +222,7 @@ if ($arch =~ /(x86(_64)?)|(i386)/) {
 $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
 $weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
 $section_regex = "Disassembly of section\\s+(\\S+):";
-$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
+$function_regex = "^([0-9a-fA-F]+)\\s+<([^^]*?)>:";
 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s(mcount|__fentry__)\$";
 $section_type = '@progbits';
 $mcount_adjust = 0;

From: Roberto Sassu <[email protected]>

commit 8e0ab8e26b72a80e991c66a8abc16e6c856abe3d upstream.

Fix two problems found in the strrchr() implementation for s390
architectures: evaluate empty strings (return the string address instead of NULL, if '\0' is passed as second argument); evaluate the first character of non-empty strings (the current implementation stops at the second).

---
 arch/s390/lib/string.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

@@ -227,14 +227,13 @@ EXPORT_SYMBOL(strcmp);
  */
 char *strrchr(const char *s, int c)
 {
-       size_t len = __strend(s) - s;
+	ssize_t len = __strend(s) - s;
 
-       if (len)
-	       do {
-		       if (s[len] == (char) c)
-			       return (char *) s + len;
-	       } while (--len > 0);
-       return NULL;
+	do {
+		if (s[len] == (char)c)
+			return (char *)s + len;
+	} while (--len >= 0);
+	return NULL;
 }
 EXPORT_SYMBOL(strrchr);
 

From: Filipe Manana <[email protected]>

commit e15ac6413745e3def00e663de00aea5a717311c1 upstream.

At replay_one_one(), we are treating any error returned from btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning that there is no existing directory entry in the fs/subvolume tree. This is not correct since we can get errors such as, for example, -EIO when reading extent buffers while searching the fs/subvolume's btree.

So fix that and return the error to the caller when it is not -ENOENT.

---
 fs/btrfs/tree-log.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -1907,7 +1907,14 @@ static noinline int replay_one_name(stru
 		ret = -EINVAL;
 		goto out;
 	}
-	if (IS_ERR_OR_NULL(dst_di)) {
+
+	if (dst_di == ERR_PTR(-ENOENT))
+		dst_di = NULL;
+
+	if (IS_ERR(dst_di)) {
+		ret = PTR_ERR(dst_di);
+		goto out;
+	} else if (!dst_di) {
 		/* we need a sequence number to insert, so we only
 		 * do inserts for the BTRFS_DIR_INDEX_KEY types
 		 */

From: Filipe Manana <[email protected]>

commit 52db77791fe24538c8aa2a183248399715f6b380 upstream.

At __inode_add_ref(), we treating any error returned from btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning that there is no existing directory entry in the fs/subvolume tree. This is not correct since we can get errors such as, for example, -EIO when reading extent buffers while searching the fs/subvolume's btree.

So fix that and return the error to the caller when it is not -ENOENT.

---
 fs/btrfs/tree-log.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -1141,7 +1141,10 @@ next:
 	/* look for a conflicting sequence number */
 	di = btrfs_lookup_dir_index_item(trans, root, path, btrfs_ino(dir),
 					 ref_index, name, namelen, 0);
-	if (di && !IS_ERR(di)) {
+	if (IS_ERR(di)) {
+		if (PTR_ERR(di) != -ENOENT)
+			return PTR_ERR(di);
+	} else if (di) {
 		ret = drop_one_dir_item(trans, root, path, dir, di);
 		if (ret)
 			return ret;

@@ -1151,7 +1154,9 @@ next:
 	/* look for a conflicing name */
 	di = btrfs_lookup_dir_item(trans, root, path, btrfs_ino(dir),
 				   name, namelen, 0);
-	if (di && !IS_ERR(di)) {
+	if (IS_ERR(di)) {
+		return PTR_ERR(di);
+	} else if (di) {
 		ret = drop_one_dir_item(trans, root, path, dir, di);
 		if (ret)
 			return ret;

From: Filipe Manana <[email protected]>

commit cfd312695b71df04c3a2597859ff12c470d1e2e4 upstream.

At replay_one_name(), we are treating any error from btrfs_lookup_inode() as if the inode does not exists. Fix this by checking for an error and returning it to the caller.

---
 fs/btrfs/tree-log.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

@@ -1871,8 +1871,8 @@ static noinline int replay_one_name(stru
 	struct btrfs_key log_key;
 	struct inode *dir;
 	u8 log_type;
-	int exists;
-	int ret = 0;
+	bool exists;
+	int ret;
 	bool update_size = (key->type == BTRFS_DIR_INDEX_KEY);
 	bool name_added = false;
 

@@ -1892,12 +1892,12 @@ static noinline int replay_one_name(stru
 		   name_len);
 
 	btrfs_dir_item_key_to_cpu(eb, di, &log_key);
-	exists = btrfs_lookup_inode(trans, root, path, &log_key, 0);
-	if (exists == 0)
-		exists = 1;
-	else
-		exists = 0;
+	ret = btrfs_lookup_inode(trans, root, path, &log_key, 0);
 	btrfs_release_path(path);
+	if (ret < 0)
+		goto out;
+	exists = (ret == 0);
+	ret = 0;
 
 	if (key->type == BTRFS_DIR_ITEM_KEY) {
 		dst_di = btrfs_lookup_dir_item(trans, root, path, key->objectid,

From: James Morse <[email protected]>

commit 64e87d4bd3201bf8a4685083ee4daf5c0d001452 upstream.

domain_add_cpu() is called whenever a CPU is brought online. The earlier call to domain_setup_ctrlval() allocates the control value arrays.

If domain_setup_mon_state() fails, the control value arrays are not freed.

Add the missing kfree() calls.

---
 arch/x86/kernel/cpu/intel_rdt.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -563,6 +563,8 @@ static void domain_add_cpu(int cpu, stru
 	}
 
 	if (r->mon_capable && domain_setup_mon_state(r, d)) {
+		kfree(d->ctrl_val);
+		kfree(d->mbps_val);
 		kfree(d);
 		return;
 	}

From: Andy Shevchenko <[email protected]>

commit 75c10c5e7a715550afdd51ef8cfd1d975f48f9e1 upstream.

Add Ice Lake-N device ID.

The device can be found on MacBookPro16,2 [1].

[1]: https://linux-hardware.org/?probe=f1c5cf0c43

---
 drivers/misc/mei/hw-me-regs.h |    1 +
 drivers/misc/mei/pci-me.c     |    1 +
 2 files changed, 2 insertions(+)

@@ -150,6 +150,7 @@
 #define MEI_DEV_ID_CDF        0x18D3  /* Cedar Fork */
 
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
+#define MEI_DEV_ID_ICP_N      0x38E0  /* Ice Lake Point N */
 
 #define MEI_DEV_ID_TGP_LP     0xA0E0  /* Tiger Lake Point LP */
 

@@ -112,6 +112,7 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH12_CFG)},
 

From: Jonathan Bell <[email protected]>

commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream.

See https://github.com/raspberrypi/linux/issues/3981

Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these.

---
 drivers/usb/host/xhci.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -3093,10 +3093,13 @@ static void xhci_endpoint_reset(struct u
 	ep = &vdev->eps[ep_index];
 
 	/* Bail out if toggle is already being cleared by a endpoint reset */
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) {
 		ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE;
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	/* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */
 	if (usb_endpoint_xfer_control(&host_ep->desc) ||
 	    usb_endpoint_xfer_isoc(&host_ep->desc))

@@ -3182,8 +3185,10 @@ static void xhci_endpoint_reset(struct u
 	xhci_free_command(xhci, cfg_cmd);
 cleanup:
 	xhci_free_command(xhci, stop_cmd);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
 		ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
+	spin_unlock_irqrestore(&xhci->lock, flags);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,

From: Pavankumar Kondeti <[email protected]>

commit ff0e50d3564f33b7f4b35cadeabd951d66cfc570 upstream.

The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located.

---
 drivers/usb/host/xhci-ring.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

@@ -339,16 +339,22 @@ static void xhci_handle_stopped_cmd_ring
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u64 temp_64;
+	u32 temp_32;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
 
 	reinit_completion(&xhci->cmd_ring_stop_completion);
 
-	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-	xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
-			&xhci->op_regs->cmd_ring);
+	/*
+	 * The control bits like command stop, abort are located in lower
+	 * dword of the command ring control register. Limit the write
+	 * to the lower dword to avoid corrupting the command ring pointer
+	 * in case if the command ring is stopped by the time upper dword
+	 * is written.
+	 */
+	temp_32 = readl(&xhci->op_regs->cmd_ring);
+	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
 
 	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
 	 * completion of the Command Abort operation. If CRR is not negated in 5

From: Nikolay Martynov <[email protected]>

commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream.

Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller.
Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth.

---
 drivers/usb/host/xhci-pci.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -28,6 +28,7 @@
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009	0x1009
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100	0x1100
 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f

@@ -89,6 +90,7 @@ static void xhci_pci_quirks(struct devic
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 ||
 			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
 		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
 				pdev->revision == 0x0) {

From: Arnd Bergmann <[email protected]>

commit 42641042c10c757fe10cc09088cf3f436cec5007 upstream.

clang-14 complains about an unusual way of converting a pointer to an integer:

drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]

        return ((ptr - NULL) & 3) != 0;

Replace this with a normal cast to uintptr_t.

---
 drivers/misc/cb710/sgbuf2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -50,7 +50,7 @@ static inline bool needs_unaligned_copy(
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	return false;
 #else
-	return ((ptr - NULL) & 3) != 0;
+	return ((uintptr_t)ptr & 3) != 0;
 #endif
 }
 

From: Ard Biesheuvel <[email protected]>

commit b3a72ca80351917cc23f9e24c35f3c3979d3c121 upstream.

Joe reports that using a statically allocated buffer for converting CPER error records into human readable text is probably a bad idea. Even though we are not aware of any actual issues, a stack buffer is clearly a better choice here anyway, so let's move the buffer into the stack frames of the two functions that refer to it.

---
 drivers/firmware/efi/cper.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -37,8 +37,6 @@
 #include <acpi/ghes.h>
 #include <ras/ras_event.h>
 
-static char rcd_decode_str[CPER_REC_LEN];
-
 /*
  * CPER record ID need to be unique even after reboot, because record
  * ID is used as index for ERST storage, while CPER records from

@@ -311,6 +309,7 @@ const char *cper_mem_err_unpack(struct t
 				struct cper_mem_err_compact *cmem)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
+	char rcd_decode_str[CPER_REC_LEN];
 
 	if (cper_mem_err_location(cmem, rcd_decode_str))
 		trace_seq_printf(p, "%s", rcd_decode_str);

@@ -325,6 +324,7 @@ static void cper_print_mem(const char *p
 	int len)
 {
 	struct cper_mem_err_compact cmem;
+	char rcd_decode_str[CPER_REC_LEN];
 
 	/* Don't trust UEFI 2.1/2.2 structure with bad validation bits */
 	if (len == sizeof(struct cper_sec_mem_err_old) &&

From: Zhang Jianhua <[email protected]>

commit 38fa3206bf441911258e5001ac8b6738693f8d82 upstream.

While reboot the system by sysrq, the following bug will be occur.

BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:90
in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 10052, name: rc.shutdown
CPU: 3 PID: 10052 Comm: rc.shutdown Tainted: G        W O      5.10.0 #1
Call trace:
 dump_backtrace+0x0/0x1c8
 show_stack+0x18/0x28
 dump_stack+0xd0/0x110
 ___might_sleep+0x14c/0x160
 __might_sleep+0x74/0x88
 down_interruptible+0x40/0x118
 virt_efi_reset_system+0x3c/0xd0
 efi_reboot+0xd4/0x11c
 machine_restart+0x60/0x9c
 emergency_restart+0x1c/0x2c
 sysrq_handle_reboot+0x1c/0x2c
 __handle_sysrq+0xd0/0x194
 write_sysrq_trigger+0xbc/0xe4
 proc_reg_write+0xd4/0xf0
 vfs_write+0xa8/0x148
 ksys_write+0x6c/0xd8
 __arm64_sys_write+0x18/0x28
 el0_svc_common.constprop.3+0xe4/0x16c
 do_el0_svc+0x1c/0x2c
 el0_svc+0x20/0x30
 el0_sync_handler+0x80/0x17c
 el0_sync+0x158/0x180

The reason for this problem is that irq has been disabled in machine_restart() and then it calls down_interruptible() in virt_efi_reset_system(), which would occur sleep in irq context, it is dangerous! Commit 99409b935c9a("locking/semaphore: Add might_sleep() to down_*() family") add might_sleep() in down_interruptible(), so the bug info is here. down_trylock() can solve this problem, cause there is no might_sleep.

--------

---
 drivers/firmware/efi/runtime-wrappers.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -395,7 +395,7 @@ static void virt_efi_reset_system(int re
 				  unsigned long data_size,
 				  efi_char16_t *data)
 {
-	if (down_interruptible(&efi_runtime_lock)) {
+	if (down_trylock(&efi_runtime_lock)) {
 		pr_warn("failed to invoke the reset_system() runtime service:\n"
 			"could not get exclusive access to the firmware\n");
 		return;

From: Miquel Raynal <[email protected]>

commit c2115b2b16421d93d4993f3fe4c520e91d6fe801 upstream.

Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error.

While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash.

My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback.

Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones.

---
 drivers/usb/musb/musb_dsps.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -901,11 +901,13 @@ static int dsps_probe(struct platform_de
 	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
 		ret = dsps_setup_optional_vbus_irq(pdev, glue);
 		if (ret)
-			goto err;
+			goto unregister_pdev;
 	}
 
 	return 0;
 
+unregister_pdev:
+	platform_device_unregister(glue->musb);
 err:
 	pm_runtime_disable(&pdev->dev);
 	iounmap(glue->usbss_base);

From: Michael Cullen <[email protected]>

commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream.

The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode.

---
 drivers/input/joystick/xpad.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -345,6 +345,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }

@@ -461,6 +462,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke X-Box One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
 };
 

From: Aleksander Morgado <[email protected]>

commit 11c52d250b34a0862edc29db03fbec23b30db6da upstream.

When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program).

  T:  Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
  D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1199 ProdID=90d2 Rev=00.00
  S:  Manufacturer=Sierra Wireless, Incorporated
  S:  Product=Sierra Wireless EM9191
  S:  SerialNumber=8W0382004102A109
  C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial

---
 drivers/usb/serial/qcserial.c |    1 +
 1 file changed, 1 insertion(+)

@@ -165,6 +165,7 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x1199, 0x907b)},	/* Sierra Wireless EM74xx */
 	{DEVICE_SWI(0x1199, 0x9090)},	/* Sierra Wireless EM7565 QDL */
 	{DEVICE_SWI(0x1199, 0x9091)},	/* Sierra Wireless EM7565 */
+	{DEVICE_SWI(0x1199, 0x90d2)},	/* Sierra Wireless EM9191 QDL */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */

From: Yu-Tung Chang <[email protected]>

commit 2263eb7370060bdb0013bc14e1a7c9bf33617a55 upstream.

Add usb product id of the Quectel EC200S-CN module.

usb-devices output for 0x6002:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6002 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=0000
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -251,6 +251,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EP06			0x0306
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
+#define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200T			0x6026
 
 #define CMOTECH_VENDOR_ID			0x16d8

@@ -1128,6 +1129,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
 	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },

From: Daniele Palmas <[email protected]>

commit f5a8a07edafed8bede17a95ef8940fe3a57a77d5 upstream.

Add the following Telit LE910Cx composition:

0x1204: tty, adb, mbim, tty, tty, tty, tty

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1229,6 +1229,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1203, 0xff),	/* Telit LE910Cx (RNDIS) */
 	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1204, 0xff),	/* Telit LE910Cx (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),

From: Tomaz Solc <[email protected]>

commit c184accc4a42c7872dc8e8d0fc97a740dc61fe24 upstream.

Adding support for Quectel EG91 LTE module.

The interface layout is same as for EG95.

usb-devices output:

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0191 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan

Interfaces:

0: Diag
1: GNSS
2: AT-command interface/modem
3: Modem
4: QMI

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -246,6 +246,7 @@ static void option_instat_callback(struc
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
 #define QUECTEL_PRODUCT_EC25			0x0125
+#define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
 #define QUECTEL_PRODUCT_EP06			0x0306

@@ -1112,6 +1113,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG91, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },

From: Halil Pasic <[email protected]>

commit 2f9a174f918e29608564c7a4e8329893ab604fb4 upstream.

The virtio specification virtio-v1.1-cs01 states: "Transitional devices MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not been acknowledged by the driver." This is exactly what QEMU as of 6.1 has done relying solely on VIRTIO_F_VERSION_1 for detecting that.

However, the specification also says: "... the driver MAY read (but MUST NOT write) the device-specific configuration fields to check that it can support the device ..." before setting FEATURES_OK.

In that case, any transitional device relying solely on VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in legacy format. In particular, this implies that it is in big endian format for big endian guests. This naturally confuses the driver which expects little endian in the modern mode.

It is probably a good idea to amend the spec to clarify that VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation is complete. Before validate callback existed, config space was only read after FEATURES_OK. However, we already have two regressions, so let's address this here as well.

The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when virtio 1.0 is used on both sides. The latter renders virtio-blk unusable with DASD backing, because things simply don't work with the default. See Fixes tags for relevant commits.

For QEMU, we can work around the issue by writing out the feature bits with VIRTIO_F_VERSION_1 bit set. We (ab)use the finalize_features config op for this. This isn't enough to address all vhost devices since these do not get the features until FEATURES_OK, however it looks like the affected devices actually never handled the endianness for legacy mode correctly, so at least that's not a regression.

No devices except virtio net and virtio blk seem to be affected.

Long term the right thing to do is to fix the hypervisors.

---
 drivers/virtio/virtio.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

@@ -222,6 +222,17 @@ static int virtio_dev_probe(struct devic
 		driver_features_legacy = driver_features;
 	}
 
+	/*
+	 * Some devices detect legacy solely via F_VERSION_1. Write
+	 * F_VERSION_1 to force LE config space accesses before FEATURES_OK for
+	 * these when needed.
+	 */
+	if (drv->validate && !virtio_legacy_is_little_endian()
+			  && device_features & BIT_ULL(VIRTIO_F_VERSION_1)) {
+		dev->features = BIT_ULL(VIRTIO_F_VERSION_1);
+		dev->config->finalize_features(dev);
+	}
+
 	if (device_features & (1ULL << VIRTIO_F_VERSION_1))
 		dev->features = driver_features & device_features;
 	else

From: Stephen Boyd <[email protected]>

commit 5d388fa01fa6eb310ac023a363a6cb216d9d8fe9 upstream.

If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic

*p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0);

will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long.

UBSAN reports this problem:

 UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8
 shift exponent 64 is too large for 64-bit type 'unsigned long'
 CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9
 Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
 Workqueue: events_unbound deferred_probe_work_func
 Call trace:
  dump_backtrace+0x0/0x170
  show_stack+0x24/0x30
  dump_stack_lvl+0x64/0x7c
  dump_stack+0x18/0x38
  ubsan_epilogue+0x10/0x54
  __ubsan_handle_shift_out_of_bounds+0x180/0x194
  __nvmem_cell_read+0x1ec/0x21c
  nvmem_cell_read+0x58/0x94
  nvmem_cell_read_variable_common+0x4c/0xb0
  nvmem_cell_read_variable_le_u32+0x40/0x100
  a6xx_gpu_init+0x170/0x2f4
  adreno_bind+0x174/0x284
  component_bind_all+0xf0/0x264
  msm_drm_bind+0x1d8/0x7a0
  try_to_bring_up_master+0x164/0x1ac
  __component_add+0xbc/0x13c
  component_add+0x20/0x2c
  dp_display_probe+0x340/0x384
  platform_probe+0xc0/0x100
  really_probe+0x110/0x304
  __driver_probe_device+0xb8/0x120
  driver_probe_device+0x4c/0xfc
  __device_attach_driver+0xb0/0x128
  bus_for_each_drv+0x90/0xdc
  __device_attach+0xc8/0x174
  device_initial_probe+0x20/0x2c
  bus_probe_device+0x40/0xa4
  deferred_probe_work_func+0x7c/0xb8
  process_one_work+0x128/0x21c
  process_scheduled_works+0x40/0x54
  worker_thread+0x1ec/0x2a8
  kthread+0x138/0x158
  ret_from_fork+0x10/0x20

Fix it by making sure there are any bits to mask out.

---
 drivers/nvmem/core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1061,7 +1061,8 @@ static void nvmem_shift_read_buffer_in_p
 		*p-- = 0;
 
 	/* clear msb bits if any leftover in the last byte */
-	*p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0);
+	if (cell->nbits % BITS_PER_BYTE)
+		*p &= GENMASK((cell->nbits % BITS_PER_BYTE) - 1, 0);
 }
 
 static int __nvmem_cell_read(struct nvmem_device *nvmem,

From: Borislav Petkov <[email protected]>

commit 711885906b5c2df90746a51f4cd674f1ab9fbb1d upstream.

This Kconfig option was added initially so that memory encryption is enabled by default on machines which support it.

However, devices which have DMA masks that are less than the bit position of the encryption bit, aka C-bit, require the use of an IOMMU or the use of SWIOTLB.

If the IOMMU is disabled or in passthrough mode, the kernel would switch to SWIOTLB bounce-buffering for those transfers.

In order to avoid that,

2cc13bb4f59f ("iommu: Disable passthrough mode when SME is active")

disables the default IOMMU passthrough mode so that devices for which the default 256K DMA is insufficient, can use the IOMMU instead.

However 2, there are cases where the IOMMU is disabled in the BIOS, etc. (think the usual hardware folk "oops, I dropped the ball there" cases) or a driver doesn't properly use the DMA APIs or a device has a firmware or hardware bug, e.g.:

ea68573d408f ("drm/amdgpu: Fail to load on RAVEN if SME is active")

However 3, in the above GPU use case, there are APIs like Vulkan and some OpenGL/OpenCL extensions which are under the assumption that user-allocated memory can be passed in to the kernel driver and both the GPU and CPU can do coherent and concurrent access to the same memory. That cannot work with SWIOTLB bounce buffers, of course.

So, in order for those devices to function, drop the "default y" for the SME by default active option so that users who want to have SME enabled, will need to either enable it in their config or use "mem_encrypt=on" on the kernel command line.

[ tlendacky: Generalize commit message. ]

---
 arch/x86/Kconfig |    1 -
 1 file changed, 1 deletion(-)

@@ -1496,7 +1496,6 @@ config AMD_MEM_ENCRYPT
 
 config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
 	bool "Activate AMD Secure Memory Encryption (SME) by default"
-	default y
 	depends on AMD_MEM_ENCRYPT
 	---help---
 	  Say yes to have system memory encrypted by default if running on

From: Billy Tsai <[email protected]>

commit eb795cd97365a3d3d9da3926d234a7bc32a3bb15 upstream.

Fix the issue when adc remove will get the null driver data.

Fixed: commit 573803234e72 ("iio: Aspeed ADC")

---
 drivers/iio/adc/aspeed_adc.c |    1 +
 1 file changed, 1 insertion(+)

@@ -188,6 +188,7 @@ static int aspeed_adc_probe(struct platf
 
 	data = iio_priv(indio_dev);
 	data->dev = &pdev->dev;
+	platform_set_drvdata(pdev, indio_dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->base = devm_ioremap_resource(&pdev->dev, res);

From: Christophe JAILLET <[email protected]>

commit bbcf40816b547b3c37af49168950491d20d81ce1 upstream.

A successful 'regulator_enable()' call should be balanced by a corresponding 'regulator_disable()' call in the error handling path of the probe, as already done in the remove function.

Update the error handling path accordingly.

---
 drivers/iio/adc/ti-adc128s052.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -168,7 +168,13 @@ static int adc128_probe(struct spi_devic
 	mutex_init(&adc->lock);
 
 	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_disable_regulator;
 
+	return 0;
+
+err_disable_regulator:
+	regulator_disable(adc->reg);
 	return ret;
 }
 

From: Jiri Valek - 2N <[email protected]>

commit 26d90b5590579def54382a2fc34cfbe8518a9851 upstream.

Reading from sensor returned timeout error under
zero light conditions.

---
 drivers/iio/light/opt3001.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -283,6 +283,8 @@ static int opt3001_get_lux(struct opt300
 		ret = wait_event_timeout(opt->result_ready_queue,
 				opt->result_ready,
 				msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
+		if (ret == 0)
+			return -ETIMEDOUT;
 	} else {
 		/* Sleep for result ready time */
 		timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?

@@ -319,9 +321,7 @@ err:
 		/* Disallow IRQ to access the device while lock is active */
 		opt->ok_to_ignore_lock = false;
 
-	if (ret == 0)
-		return -ETIMEDOUT;
-	else if (ret < 0)
+	if (ret < 0)
 		return ret;
 
 	if (opt->use_irq) {

From: Dan Carpenter <[email protected]>

commit 8167c9a375ccceed19048ad9d68cb2d02ed276e0 upstream.

The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again.

---
 drivers/iio/common/ssp_sensors/ssp_spi.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -283,6 +283,8 @@ static int ssp_parse_dataframe(struct ss
 	for (idx = 0; idx < len;) {
 		switch (dataframe[idx++]) {
 		case SSP_MSG2AP_INST_BYPASS_DATA:
+			if (idx >= len)
+				return -EPROTO;
 			sd = dataframe[idx++];
 			if (sd < 0 || sd >= SSP_SENSOR_MAX) {
 				dev_err(SSP_DEV,

@@ -292,10 +294,13 @@ static int ssp_parse_dataframe(struct ss
 
 			if (indio_devs[sd]) {
 				spd = iio_priv(indio_devs[sd]);
-				if (spd->process_data)
+				if (spd->process_data) {
+					if (idx >= len)
+						return -EPROTO;
 					spd->process_data(indio_devs[sd],
 							  &dataframe[idx],
 							  data->timestamp);
+				}
 			} else {
 				dev_err(SSP_DEV, "no client for frame\n");
 			}

@@ -303,6 +308,8 @@ static int ssp_parse_dataframe(struct ss
 			idx += ssp_offset_map[sd];
 			break;
 		case SSP_MSG2AP_INST_DEBUG_DATA:
+			if (idx >= len)
+				return -EPROTO;
 			sd = ssp_print_mcu_debug(dataframe, &idx, len);
 			if (sd) {
 				dev_err(SSP_DEV,

From: Dan Carpenter <[email protected]>

commit 4170d3dd1467e9d78cb9af374b19357dc324b328 upstream.

The ssp_print_mcu_debug() function should return negative error codes on error. Returning "length" is meaningless. This change does not affect runtime because the callers only care about zero/non-zero.

---
 drivers/iio/common/ssp_sensors/ssp_spi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -147,7 +147,7 @@ static int ssp_print_mcu_debug(char *dat
 	if (length > received_len - *data_index || length <= 0) {
 		ssp_dbg("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n",
 			length, received_len);
-		return length ? length : -EPROTO;
+		return -EPROTO;
 	}
 
 	ssp_dbg("[SSP]: MSG From MCU - %s\n", &data_frame[*data_index]);

From: Dan Carpenter <[email protected]>

commit f7a28df7db84eb3410e9eca37832efa5aed93338 upstream.

If we have an unexpected number of channels then return -EINVAL instead of returning success.

---
 drivers/iio/dac/ti-dac5571.c |    1 +
 1 file changed, 1 insertion(+)

@@ -355,6 +355,7 @@ static int dac5571_probe(struct i2c_clie
 		data->dac5571_pwrdwn = dac5571_pwrdwn_quad;
 		break;
 	default:
+		ret = -EINVAL;
 		goto err;
 	}
 

From: Eiichi Tsukata <[email protected]>

commit a2d859e3fc97e79d907761550dbc03ff1b36479c upstream.

sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON.

---
 net/sctp/sm_make_chunk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3673,7 +3673,7 @@ struct sctp_chunk *sctp_make_strreset_re
 	outlen = (sizeof(outreq) + stream_len) * out;
 	inlen = (sizeof(inreq) + stream_len) * in;
 
-	retval = sctp_make_reconf(asoc, outlen + inlen);
+	retval = sctp_make_reconf(asoc, SCTP_PAD4(outlen) + SCTP_PAD4(inlen));
 	if (!retval)
 		return NULL;
 

From: Vegard Nossum <[email protected]>

commit e599ee234ad4fdfe241d937bbabd96e0d8f9d868 upstream.

Fix the following build/link error by adding a dependency on the CRC32 routines:

ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode':
emac_main.c:(.text+0xb11): undefined reference to `crc32_le'

The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode().

[v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...]

---
 drivers/net/ethernet/arc/Kconfig |    1 +
 1 file changed, 1 insertion(+)

@@ -20,6 +20,7 @@ config ARC_EMAC_CORE
 	depends on ARC || ARCH_ROCKCHIP || COMPILE_TEST
 	select MII
 	select PHYLIB
+	select CRC32
 
 config ARC_EMAC
 	tristate "ARC EMAC support"

From: Vegard Nossum <[email protected]>

commit 427f974d9727ca681085ddcd0530c97ab5811ae0 upstream.

Fix the following build/link error by adding a dependency on the CRC32 routines:

ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list':
korina.c:(.text+0x1af): undefined reference to `crc32_le'

---
 drivers/net/ethernet/Kconfig |    1 +
 1 file changed, 1 insertion(+)

@@ -98,6 +98,7 @@ config JME
 config KORINA
 	tristate "Korina (IDT RC32434) Ethernet support"
 	depends on MIKROTIK_RB532
+	select CRC32
 	---help---
 	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
 	  based system say Y. Otherwise say N.

From: Nanyong Sun <[email protected]>

commit f03dca0c9e2297c84a018e306f8a9cd534ee4287 upstream.

devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register:

general protection fault in encx24j600_spi_probe
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540
Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00
RSP: 0018:ffffc900010476b8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000
RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094
RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a
R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001
R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08
FS:  00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459
 spi_probe drivers/spi/spi.c:397
 really_probe drivers/base/dd.c:517
 __driver_probe_device drivers/base/dd.c:751
 driver_probe_device drivers/base/dd.c:782
 __device_attach_driver drivers/base/dd.c:899
 bus_for_each_drv drivers/base/bus.c:427
 __device_attach drivers/base/dd.c:971
 bus_probe_device drivers/base/bus.c:487
 device_add drivers/base/core.c:3364
 __spi_add_device drivers/spi/spi.c:599
 spi_add_device drivers/spi/spi.c:641
 spi_new_device drivers/spi/spi.c:717
 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e]
 dev_attr_store drivers/base/core.c:2074
 sysfs_kf_write fs/sysfs/file.c:139
 kernfs_fop_write_iter fs/kernfs/file.c:300
 new_sync_write fs/read_write.c:508 (discriminator 4)
 vfs_write fs/read_write.c:594
 ksys_write fs/read_write.c:648
 do_syscall_64 arch/x86/entry/common.c:50
 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113

Add error check in devm_regmap_init_encx24j600 to avoid this situation.

---
 drivers/net/ethernet/microchip/encx24j600-regmap.c |   10 ++++++++--
 drivers/net/ethernet/microchip/encx24j600.c        |    5 ++++-
 drivers/net/ethernet/microchip/encx24j600_hw.h     |    4 ++--
 3 files changed, 14 insertions(+), 5 deletions(-)

@@ -505,13 +505,19 @@ static struct regmap_bus phymap_encx24j6
 	.reg_read = regmap_encx24j600_phy_reg_read,
 };
 
-void devm_regmap_init_encx24j600(struct device *dev,
-				 struct encx24j600_context *ctx)
+int devm_regmap_init_encx24j600(struct device *dev,
+				struct encx24j600_context *ctx)
 {
 	mutex_init(&ctx->mutex);
 	regcfg.lock_arg = ctx;
 	ctx->regmap = devm_regmap_init(dev, &regmap_encx24j600, ctx, &regcfg);
+	if (IS_ERR(ctx->regmap))
+		return PTR_ERR(ctx->regmap);
 	ctx->phymap = devm_regmap_init(dev, &phymap_encx24j600, ctx, &phycfg);
+	if (IS_ERR(ctx->phymap))
+		return PTR_ERR(ctx->phymap);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(devm_regmap_init_encx24j600);
 

@@ -1032,10 +1032,13 @@ static int encx24j600_spi_probe(struct s
 	priv->speed = SPEED_100;
 
 	priv->ctx.spi = spi;
-	devm_regmap_init_encx24j600(&spi->dev, &priv->ctx);
 	ndev->irq = spi->irq;
 	ndev->netdev_ops = &encx24j600_netdev_ops;
 
+	ret = devm_regmap_init_encx24j600(&spi->dev, &priv->ctx);
+	if (ret)
+		goto out_free;
+
 	mutex_init(&priv->lock);
 
 	/* Reset device and check if it is connected */

@@ -15,8 +15,8 @@ struct encx24j600_context {
 	int bank;
 };
 
-void devm_regmap_init_encx24j600(struct device *dev,
-				 struct encx24j600_context *ctx);
+int devm_regmap_init_encx24j600(struct device *dev,
+				struct encx24j600_context *ctx);
 
 /* Single-byte instructions */
 #define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1))

From: Arnd Bergmann <[email protected]>

commit 40507e7aada8422c38aafa0c8a1a09e4623c712a upstream.

After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function:

In function '__dev_addr_set',
inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2,
inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2,
inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7:
arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict]
182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n)

      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy'
 4648 |         memcpy(dev->dev_addr, addr, len);
      |         ^~~~~~

What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time.

Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type.

---
 drivers/net/ethernet/neterion/s2io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -8569,7 +8569,7 @@ static void s2io_io_resume(struct pci_de
 			return;
 		}
 
-		if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
+		if (do_s2io_prog_unicast(netdev, netdev->dev_addr) == FAILURE) {
 			s2io_card_down(sp);
 			pr_err("Can't restore mac addr after reset.\n");
 			return;

From: Ziyang Xuan <[email protected]>

commit 0911ab31896f0e908540746414a77dd63912748d upstream.

When nfc proto id is using, nfc_proto_register() return -EBUSY error code, but forgot to unregister proto. Fix it by adding proto_unregister() in the error handling case.

---
 net/nfc/af_nfc.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -72,6 +72,9 @@ int nfc_proto_register(const struct nfc_
 		proto_tab[nfc_proto->id] = nfc_proto;
 	write_unlock(&proto_tab_lock);
 
+	if (rc)
+		proto_unregister(nfc_proto->proto);
+
 	return rc;
 }
 EXPORT_SYMBOL(nfc_proto_register);

From: Ziyang Xuan <[email protected]>

commit 58e7dcc9ca29c14e44267a4d0ea61e3229124907 upstream.

'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed.

---
 net/nfc/digital_core.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -286,6 +286,7 @@ int digital_tg_configure_hw(struct nfc_d
 static int digital_tg_listen_mdaa(struct nfc_digital_dev *ddev, u8 rf_tech)
 {
 	struct digital_tg_mdaa_params *params;
+	int rc;
 
 	params = kzalloc(sizeof(*params), GFP_KERNEL);
 	if (!params)

@@ -300,8 +301,12 @@ static int digital_tg_listen_mdaa(struct
 	get_random_bytes(params->nfcid2 + 2, NFC_NFCID2_MAXSIZE - 2);
 	params->sc = DIGITAL_SENSF_FELICA_SC;
 
-	return digital_send_cmd(ddev, DIGITAL_CMD_TG_LISTEN_MDAA, NULL, params,
-				500, digital_tg_recv_atr_req, NULL);
+	rc = digital_send_cmd(ddev, DIGITAL_CMD_TG_LISTEN_MDAA, NULL, params,
+			      500, digital_tg_recv_atr_req, NULL);
+	if (rc)
+		kfree(params);
+
+	return rc;
 }
 
 static int digital_tg_listen_md(struct nfc_digital_dev *ddev, u8 rf_tech)

From: Ziyang Xuan <[email protected]>

commit 291c932fc3692e4d211a445ba8aa35663831bac7 upstream.

'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed.

---
 net/nfc/digital_technology.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -474,8 +474,12 @@ static int digital_in_send_sdd_req(struc
 	skb_put_u8(skb, sel_cmd);
 	skb_put_u8(skb, DIGITAL_SDD_REQ_SEL_PAR);
 
-	return digital_in_send_cmd(ddev, skb, 30, digital_in_recv_sdd_res,
-				   target);
+	rc = digital_in_send_cmd(ddev, skb, 30, digital_in_recv_sdd_res,
+				 target);
+	if (rc)
+		kfree_skb(skb);
+
+	return rc;
 }
 
 static void digital_in_recv_sens_res(struct nfc_digital_dev *ddev, void *arg,

From: Dan Carpenter <[email protected]>

commit 013923477cb311293df9079332cf8b806ed0e6f2 upstream.

The last byte of "pad" is used without being initialized.

---
 drivers/ata/pata_legacy.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -329,7 +329,8 @@ static unsigned int pdc_data_xfer_vlb(st
 			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 
 		if (unlikely(slop)) {
-			__le32 pad;
+			__le32 pad = 0;
+
 			if (rw == READ) {
 				pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
 				memcpy(buf + buflen - slop, &pad, slop);

@@ -719,7 +720,8 @@ static unsigned int vlb32_data_xfer(stru
 			ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 
 		if (unlikely(slop)) {
-			__le32 pad;
+			__le32 pad = 0;
+
 			if (rw == WRITE) {
 				memcpy(&pad, buf + buflen - slop, slop);
 				iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);

From: Vadim Pasternak <[email protected]>

commit 9b024201693e397441668cca0d2df7055fe572eb upstream.

Change kstrtou32() argument 'base' to be zero instead of 'len'. It works by chance for setting one bit value, but it is not supposed to work in case value passed to mlxreg_io_attr_store() is greater than 1.

It works for example, for:
echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable But it will fail for:
echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable, where n > 1.

The flow for input buffer conversion is as below:
_kstrtoull(const char *s, unsigned int base, unsigned long long *res) calls:
rv = _parse_integer(s, base, &_res);

For the second case, where n > 1:
- _parse_integer() converts 's' to 'val'.
For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3 'len' is set to 3 (string buffer 0x33 0x0a), etcetera.
- 'base' is equal or greater then '2' (length of input buffer).

As a result, _parse_integer() exits with result zero (rv):

	rv = 0;
	while (1) {
		...
		if (val >= base)-> (2 >= 2)
			break;
		...
		rv++;
		...
	}

And _kstrtoull() in their turn will fail:

	if (rv == 0)
		return -EINVAL;

---
 drivers/platform/mellanox/mlxreg-io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -123,7 +123,7 @@ mlxreg_io_attr_store(struct device *dev,
 		return -EINVAL;
 
 	/* Convert buffer to input value. */
-	ret = kstrtou32(buf, len, &input_val);
+	ret = kstrtou32(buf, 0, &input_val);
 	if (ret)
 		return ret;
 

From: Colin Ian King <[email protected]>

commit 2133c4fc8e1348dcb752f267a143fe2254613b34 upstream.

The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked.

Addresses-Coverity: ("Dereference before null check")

---
 drivers/gpu/drm/msm/edp/edp_ctrl.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1090,7 +1090,7 @@ void msm_edp_ctrl_power(struct edp_ctrl
 int msm_edp_ctrl_init(struct msm_edp *edp)
 {
 	struct edp_ctrl *ctrl = NULL;
-	struct device *dev = &edp->pdev->dev;
+	struct device *dev;
 	int ret;
 
 	if (!edp) {

@@ -1098,6 +1098,7 @@ int msm_edp_ctrl_init(struct msm_edp *ed
 		return -EINVAL;
 	}
 
+	dev = &edp->pdev->dev;
 	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl)
 		return -ENOMEM;

From: Dmitry Baryshkov <[email protected]>

commit c491a0c7bbf3a64732cb8414021429d15ec08eec upstream.

Since f35a2a99100f ("drm/encoder: make encoder control functions optional") drm_mode_config_validate would print warnings if both cursor plane and cursor functions are provided. Restore separate set of drm_crtc_funcs to be used if separate cursor plane is provided.

[    6.556046] ------------[ cut here ]------------
[    6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func
[    6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0
[    6.567453] Modules linked in:
[    6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43
[    6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
[    6.587763] Workqueue: events_unbound deferred_probe_work_func
[    6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.599740] pc : drm_mode_config_validate+0x238/0x4d0
[    6.606596] lr : drm_mode_config_validate+0x238/0x4d0
[    6.611804] sp : ffff8000121b3980
[    6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001
[    6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8
[    6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001
[    6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff
[    6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709
[    6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab
[    6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850
[    6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850
[    6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000
[    6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800
[    6.684205] Call trace:
[    6.691319]  drm_mode_config_validate+0x238/0x4d0
[    6.693577]  drm_dev_register+0x17c/0x210
[    6.698435]  msm_drm_bind+0x4b4/0x694
[    6.702429]  try_to_bring_up_master+0x164/0x1d0
[    6.706075]  __component_add+0xa0/0x170
[    6.710415]  component_add+0x14/0x20
[    6.714234]  msm_hdmi_dev_probe+0x1c/0x2c
[    6.718053]  platform_probe+0x68/0xe0
[    6.721959]  really_probe.part.0+0x9c/0x30c
[    6.725606]  __driver_probe_device+0x98/0x144
[    6.729600]  driver_probe_device+0xc8/0x15c
[    6.734114]  __device_attach_driver+0xb4/0x120
[    6.738106]  bus_for_each_drv+0x78/0xd0
[    6.742619]  __device_attach+0xdc/0x184
[    6.746351]  device_initial_probe+0x14/0x20
[    6.750172]  bus_probe_device+0x9c/0xa4
[    6.754337]  deferred_probe_work_func+0x88/0xc0
[    6.758158]  process_one_work+0x1d0/0x370
[    6.762671]  worker_thread+0x2c8/0x470
[    6.766839]  kthread+0x15c/0x170
[    6.770483]  ret_from_fork+0x10/0x20
[    6.773870] ---[ end trace 5884eb76cd26d274 ]---
[    6.777500] ------------[ cut here ]------------
[    6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func
[    6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0
[    6.794362] Modules linked in:
[    6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G        W         5.15.0-rc1-dirty #43
[    6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
[    6.816148] Workqueue: events_unbound deferred_probe_work_func
[    6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.828126] pc : drm_mode_config_validate+0x290/0x4d0
[    6.834981] lr : drm_mode_config_validate+0x290/0x4d0
[    6.840189] sp : ffff8000121b3980
[    6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001
[    6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8
[    6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001
[    6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff
[    6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2
[    6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f
[    6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850
[    6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850
[    6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000
[    6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800
[    6.912590] Call trace:
[    6.919702]  drm_mode_config_validate+0x290/0x4d0
[    6.921960]  drm_dev_register+0x17c/0x210
[    6.926821]  msm_drm_bind+0x4b4/0x694
[    6.930813]  try_to_bring_up_master+0x164/0x1d0
[    6.934459]  __component_add+0xa0/0x170
[    6.938799]  component_add+0x14/0x20
[    6.942619]  msm_hdmi_dev_probe+0x1c/0x2c
[    6.946438]  platform_probe+0x68/0xe0
[    6.950345]  really_probe.part.0+0x9c/0x30c
[    6.953991]  __driver_probe_device+0x98/0x144
[    6.957984]  driver_probe_device+0xc8/0x15c
[    6.962498]  __device_attach_driver+0xb4/0x120
[    6.966492]  bus_for_each_drv+0x78/0xd0
[    6.971004]  __device_attach+0xdc/0x184
[    6.974737]  device_initial_probe+0x14/0x20
[    6.978556]  bus_probe_device+0x9c/0xa4
[    6.982722]  deferred_probe_work_func+0x88/0xc0
[    6.986543]  process_one_work+0x1d0/0x370
[    6.991057]  worker_thread+0x2c8/0x470
[    6.995223]  kthread+0x15c/0x170
[    6.998869]  ret_from_fork+0x10/0x20
[    7.002255] ---[ end trace 5884eb76cd26d275 ]---

---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

@@ -1053,6 +1053,20 @@ static void mdp5_crtc_destroy_state(stru
 	kfree(mdp5_cstate);
 }
 
+static const struct drm_crtc_funcs mdp5_crtc_no_lm_cursor_funcs = {
+	.set_config = drm_atomic_helper_set_config,
+	.destroy = mdp5_crtc_destroy,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = mdp5_crtc_reset,
+	.atomic_duplicate_state = mdp5_crtc_duplicate_state,
+	.atomic_destroy_state = mdp5_crtc_destroy_state,
+	.atomic_print_state = mdp5_crtc_atomic_print_state,
+	.get_vblank_counter = mdp5_crtc_get_vblank_counter,
+	.enable_vblank  = msm_crtc_enable_vblank,
+	.disable_vblank = msm_crtc_disable_vblank,
+	.get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp,
+};
+
 static const struct drm_crtc_funcs mdp5_crtc_funcs = {
 	.set_config = drm_atomic_helper_set_config,
 	.destroy = mdp5_crtc_destroy,

@@ -1236,6 +1250,8 @@ struct drm_crtc *mdp5_crtc_init(struct d
 	mdp5_crtc->lm_cursor_enabled = cursor_plane ? false : true;
 
 	drm_crtc_init_with_planes(dev, crtc, plane, cursor_plane,
+				  cursor_plane ?
+				  &mdp5_crtc_no_lm_cursor_funcs :
 				  &mdp5_crtc_funcs, NULL);
 
 	drm_flip_work_init(&mdp5_crtc->unref_cursor_work,

From: Dan Carpenter <[email protected]>

commit 739b4e7756d3301dd673ca517afca46a5f635562 upstream.

Return an error code if msm_dsi_manager_validate_current_config(). Don't return success.

---
 drivers/gpu/drm/msm/dsi/dsi.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -208,8 +208,10 @@ int msm_dsi_modeset_init(struct msm_dsi
 		goto fail;
 	}
 
-	if (!msm_dsi_manager_validate_current_config(msm_dsi->id))
+	if (!msm_dsi_manager_validate_current_config(msm_dsi->id)) {
+		ret = -EINVAL;
 		goto fail;
+	}
 
 	msm_dsi->encoder = encoder;
 

From: Dan Carpenter <[email protected]>

commit c8f01ffc83923a91e8087aaa077de13354a7aa59 upstream.

This disables a lock which wasn't enabled and it does not disable the first lock in the array.

---
 drivers/gpu/drm/msm/dsi/dsi_host.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -468,7 +468,7 @@ static int dsi_bus_clk_enable(struct msm
 
 	return 0;
 err:
-	for (; i > 0; i--)
+	while (--i >= 0)
 		clk_disable_unprepare(msm_host->bus_clks[i]);
 
 	return ret;

From: Jackie Liu <[email protected]>

commit 596143e3aec35c93508d6b7a05ddc999ee209b61 upstream.

Fix modpost Section mismatch error in next_platform_timer().

[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.

WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.

ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1 make[1]: *** Deleting file 'vmlinux.symvers'
make: *** [Makefile:1176: vmlinux] Error 2
[...]

---
 drivers/acpi/arm64/gtdt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -39,7 +39,7 @@ struct acpi_gtdt_descriptor {
 
 static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
 
-static inline void *next_platform_timer(void *platform_timer)
+static inline __init void *next_platform_timer(void *platform_timer)
 {
 	struct acpi_gtdt_header *gh = platform_timer;
 

From: Sebastian Andrzej Siewior <[email protected]>

commit 14132690860e4d06aa3e1c4d7d8e9866ba7756dd upstream.

Introduction of lockless subqueues broke the class statistics. Before the change stats were accumulated in bstats' and qstats' on the stack which was then copied to struct gnet_dump.

After the change the bstats' and qstats' are initialized to 0 and never updated, yet still fed to gnet_dump. The code updates the global qdisc->cpu_bstats and qdisc->cpu_qstats instead, clobbering them. Most likely a copy-paste error from the code in mqprio_dump().

__gnet_stats_copy_basic() and __gnet_stats_copy_queue() accumulate the values for per-CPU case but for global stats they overwrite the value, so only stats from the last loop iteration / tc end up in sch->[bq]stats.

Use the on-stack [bq]stats variables again and add the stats manually in the global case.

https://lore.kernel.org/all/[email protected]/

---
 net/sched/sch_mqprio.c |   30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

@@ -531,22 +531,28 @@ static int mqprio_dump_class_stats(struc
 		for (i = tc.offset; i < tc.offset + tc.count; i++) {
 			struct netdev_queue *q = netdev_get_tx_queue(dev, i);
 			struct Qdisc *qdisc = rtnl_dereference(q->qdisc);
-			struct gnet_stats_basic_cpu __percpu *cpu_bstats = NULL;
-			struct gnet_stats_queue __percpu *cpu_qstats = NULL;
 
 			spin_lock_bh(qdisc_lock(qdisc));
+
 			if (qdisc_is_percpu_stats(qdisc)) {
-				cpu_bstats = qdisc->cpu_bstats;
-				cpu_qstats = qdisc->cpu_qstats;
-			}
+				qlen = qdisc_qlen_sum(qdisc);
 
-			qlen = qdisc_qlen_sum(qdisc);
-			__gnet_stats_copy_basic(NULL, &sch->bstats,
-						cpu_bstats, &qdisc->bstats);
-			__gnet_stats_copy_queue(&sch->qstats,
-						cpu_qstats,
-						&qdisc->qstats,
-						qlen);
+				__gnet_stats_copy_basic(NULL, &bstats,
+							qdisc->cpu_bstats,
+							&qdisc->bstats);
+				__gnet_stats_copy_queue(&qstats,
+							qdisc->cpu_qstats,
+							&qdisc->qstats,
+							qlen);
+			} else {
+				qlen		+= qdisc->q.qlen;
+				bstats.bytes	+= qdisc->bstats.bytes;
+				bstats.packets	+= qdisc->bstats.packets;
+				qstats.backlog	+= qdisc->qstats.backlog;
+				qstats.drops	+= qdisc->qstats.drops;
+				qstats.requeues	+= qdisc->qstats.requeues;
+				qstats.overlimits += qdisc->qstats.overlimits;
+			}
 			spin_unlock_bh(qdisc_lock(qdisc));
 		}
 

From: chongjiapeng <[email protected]>

commit a5a14ea7b4e55604acb0dc9d88fdb4cb6945bc77 upstream.

The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'.

Eliminate the follow smatch warning:

drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start()
warn: missing error code 'rc'.

---
 drivers/net/ethernet/qlogic/qed/qed_main.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1067,6 +1067,7 @@ static int qed_slowpath_start(struct qed
 			} else {
 				DP_NOTICE(cdev,
 					  "Failed to acquire PTT for aRFS\n");
+				rc = -EINVAL;
 				goto err;
 			}
 		}

From: Vegard Nossum <[email protected]>

commit 9973a43012b6ad1720dbc4d5faf5302c28635b8c upstream.

Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32:

ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum':
r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash'
ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest'
ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm'
ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode':
r8152.c:(.text+0xdcb0): undefined reference to `crc32_le'

---
 drivers/net/usb/Kconfig |    4 ++++
 1 file changed, 4 insertions(+)

@@ -98,6 +98,10 @@ config USB_RTL8150
 config USB_RTL8152
 	tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
 	select MII
+	select CRC32
+	select CRYPTO
+	select CRYPTO_HASH
+	select CRYPTO_SHA256
 	help
 	  This option adds support for Realtek RTL8152 based USB 2.0
 	  10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000

Following build errors noticed while building Linux stable rc with gcc-11 for arm and arm64 architecture.

- 5.4.154 gcc-11 arm FAILED
- 5.4.154 gcc-11 arm64 FAILED
- 4.19.212 gcc-11 arm FAILED
- 4.19.212 gcc-11 arm64 FAILED

drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1058:31: error:
'mdp5_crtc_get_vblank_counter' undeclared here (not in a function); did you mean 'mdp5_crtc_vblank_on'?

 1058 |         .get_vblank_counter = mdp5_crtc_get_vblank_counter,
      |                               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                               mdp5_crtc_vblank_on
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1059:27: error:
'msm_crtc_enable_vblank' undeclared here (not in a function); did you
mean 'drm_crtc_handle_vblank'?
 1059 |         .enable_vblank  = msm_crtc_enable_vblank,
      |                           ^~~~~~~~~~~~~~~~~~~~~~
      |                           drm_crtc_handle_vblank
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1060:27: error:
'msm_crtc_disable_vblank' undeclared here (not in a function); did you
mean 'mdp5_disable_vblank'?
 1060 |         .disable_vblank = msm_crtc_disable_vblank,
      |                           ^~~~~~~~~~~~~~~~~~~~~~~
      |                           mdp5_disable_vblank

drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1061:10: error: 'const struct drm_crtc_funcs' has no member named 'get_vblank_timestamp'
1061 | .get_vblank_timestamp =
drm_crtc_vblank_helper_get_vblank_timestamp,

      |          ^~~~~~~~~~~~~~~~~~~~

drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1061:33: error:
'drm_crtc_vblank_helper_get_vblank_timestamp' undeclared here (not in a function)
1061 | .get_vblank_timestamp =
drm_crtc_vblank_helper_get_vblank_timestamp,

      |

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1061:33: warning: excess elements in struct initializer drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:1061:33: note: (near initialization for 'mdp5_crtc_no_lm_cursor_funcs')
make[5]: *** [scripts/Makefile.build:262:
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.o] Error 1
make[5]: Target '__build' not remade because of errors. make[4]: *** [scripts/Makefile.build:497: drivers/gpu/drm/msm] Error 2 make[4]: Target '__build' not remade because of errors. make[3]: *** [scripts/Makefile.build:497: drivers/gpu/drm] Error 2 make[3]: Target '__build' not remade because of errors. make[2]: *** [scripts/Makefile.build:497: drivers/gpu] Error 2 make[2]: Target '__build' not remade because of errors. make[1]: *** [Makefile:1734: drivers] Error 2
make[1]: Target '_all' not remade because of errors.
make: *** [Makefile:179: sub-make] Error 2

Build config:
https://builds.tuxbuild.com/1zgK0LewhdaH7jb2PYiEaTFPgT9/config

steps to reproduce:
https://builds.tuxbuild.com/1zgK0LewhdaH7jb2PYiEaTFPgT9/tuxmake_reproducer.sh

--
Linaro LKFT
https://lkft.linaro.org

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah