Skip to contentSkip to conversation

scsi: ufs-pci: Force a full restore after suspend-to-disk

PATCH Applied Adrian Hunter 2 participants 3 messages Oct 18, 2021 – Oct 19, 2021 SCSI

lore
Share & tools
lore
#0 lore raw

v2 cover scsi: ufs-pci: Force a full restore after suspend-to-disk

Hi

This patch ensures suspend-to-disk works with Host Performance Booster. Since the Host Perfomance Booster feature was added in v5.15, please consider this for v5.15 fixes.

Changes in V2:

scsi: ufs-pci: Force a full restore after suspend-to-disk

Add missing #ifdef CONFIG_PM_SLEEP as per
kernel test robot <[email protected]>

Add Reviewed-by: Avri Altman <[email protected]>

Adrian Hunter (1):
scsi: ufs-pci: Force a full restore after suspend-to-disk

 drivers/scsi/ufs/ufshcd-pci.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

Regards
Adrian

#1 lore raw

PATCH v2 1/1 scsi: ufs-pci: Force a full restore after suspend-to-disk

Implement the ->restore() PM operation and set the link to off, which will force a full reset and restore. This ensures that Host Performance Booster is reset after suspend-to-disk.

The Host Performance Booster feature caches logical-to-physical mapping information in the host memory. After suspend-to-disk, such information is not valid, so a full reset and restore is needed.

A full reset and restore is done if the SPM level is 5 or 6, but not for other SPM levels, so this change fixes those cases.

A full reset and restore also restores base address registers, so that code is removed.

---
 drivers/scsi/ufs/ufshcd-pci.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)
drivers/scsi/ufs/ufshcd-pci.c +18 -15
index 149c1aa09103..51424557810d 100644
@@ -370,20 +370,6 @@ static void ufs_intel_common_exit(struct ufs_hba *hba)
 
 static int ufs_intel_resume(struct ufs_hba *hba, enum ufs_pm_op op)
 {
-	/*
-	 * To support S4 (suspend-to-disk) with spm_lvl other than 5, the base
-	 * address registers must be restored because the restore kernel can
-	 * have used different addresses.
-	 */
-	ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
-		      REG_UTP_TRANSFER_REQ_LIST_BASE_L);
-	ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
-		      REG_UTP_TRANSFER_REQ_LIST_BASE_H);
-	ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
-		      REG_UTP_TASK_REQ_LIST_BASE_L);
-	ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
-		      REG_UTP_TASK_REQ_LIST_BASE_H);
-
 	if (ufshcd_is_link_hibern8(hba)) {
 		int ret = ufshcd_uic_hibern8_exit(hba);
 
@@ -463,6 +449,18 @@ static struct ufs_hba_variant_ops ufs_intel_lkf_hba_vops = {
 	.device_reset		= ufs_intel_device_reset,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int ufshcd_pci_restore(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	/* Force a full reset and restore */
+	ufshcd_set_link_off(hba);
+
+	return ufshcd_system_resume(dev);
+}
+#endif
+
 /**
  * ufshcd_pci_shutdown - main function to put the controller in reset state
  * @pdev: pointer to PCI device handle
@@ -546,9 +544,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 }
 
 static const struct dev_pm_ops ufshcd_pci_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
 	SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
 #ifdef CONFIG_PM_SLEEP
+	.suspend	= ufshcd_system_suspend,
+	.resume		= ufshcd_system_resume,
+	.freeze		= ufshcd_system_suspend,
+	.thaw		= ufshcd_system_resume,
+	.poweroff	= ufshcd_system_suspend,
+	.restore	= ufshcd_pci_restore,
 	.prepare	= ufshcd_suspend_prepare,
 	.complete	= ufshcd_resume_complete,
 #endif
Signature · 1 line
2.25.1
#2 lore raw
In reply to Adrian Hunter
Quoted 8 lines · Adrian Hunter

This patch ensures suspend-to-disk works with Host Performance Booster. Since the Host Perfomance Booster feature was added in v5.15, please consider this for v5.15 fixes.

Changes in V2:

[...]

Applied to 5.15/scsi-fixes, thanks!

[1/1] scsi: ufs-pci: Force a full restore after suspend-to-disk

      https://git.kernel.org/mkp/scsi/c/4e5483b8440d
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering