isa-applesmc: provide OSK forwarding on Apple hosts
PATCH v4 1/1 isa-applesmc: provide OSK forwarding on Apple hosts
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:-device isa-applesmc,hostosk=on
Apple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial use
Guest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
--- hw/misc/applesmc.c | 155 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 1 deletion(-)
hw/misc/applesmc.c +154 -1
@@ -37,6 +37,11 @@#include "qemu/module.h" #include "qemu/timer.h" #include "qom/object.h" +#include "qapi/error.h" + +#if defined(__APPLE__) +#include <IOKit/IOKitLib.h> +#endif /* #define DEBUG_SMC */
@@ -108,6 +113,7 @@ struct AppleSMCState {uint8_t data_len;uint8_t data_pos;uint8_t data[255 ]; +bool hostosk_flag;char *osk; QLIST_HEAD(, AppleSMCData) data_def; };
@@ -312,9 +318,136 @@ static const MemoryRegionOps applesmc_err_io_ops = { }, }; +#if defined(__APPLE__) +/* +* Based on +* https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/ +*/ +enum { +SMC_CLIENT_OPEN =0 , +SMC_CLIENT_CLOSE =1 , +SMC_HANDLE_EVENT =2 , +SMC_READ_KEY =5 +}; + +struct AppleSMCParam { +uint32_t key; +uint8_t pad0[22 ]; +IOByteCount data_size; +uint8_t pad1[10 ]; +uint8_t command; +uint32_t pad2; +uint8_t bytes[32 ]; +}; + +static bool applesmc_read_host_osk (char **host_osk,Error **errp) +{ +assert (host_osk !=NULL ); + +io_service_t hostsmc_service =IO_OBJECT_NULL ; +io_connect_t hostsmc_connect =IO_OBJECT_NULL ; +size_t out_size =sizeof (struct AppleSMCParam ); +IOReturn status = kIOReturnError; +struct AppleSMCParam in = {0 }; +struct AppleSMCParam out = {0 }; + +/* OSK key size + '\0' */ + *host_osk =g_malloc0 (65 ); + (*host_osk)[64 ] ='\0' ; + + hostsmc_service =IOServiceGetMatchingService (kIOMasterPortDefault, +IOServiceMatching ("AppleSMC" )); +if (hostsmc_service ==IO_OBJECT_NULL ) { +error_setg (errp,"Unable to get host-AppleSMC service" ); + goto error_osk_buffer_free; + } + + status =IOServiceOpen (hostsmc_service, +mach_task_self (), +1 , + &hostsmc_connect); +if (status != kIOReturnSuccess || hostsmc_connect ==IO_OBJECT_NULL ) { +error_setg (errp,"Unable to open host-AppleSMC service" ); + goto error_osk_buffer_free; + } + + status =IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_OPEN , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL + ); +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to connect to host-AppleSMC" ); + goto error_ioservice_close; + } + + in.key = ('OSK0' ); + in.data_size =sizeof (out.bytes); + in.command =SMC_READ_KEY ; + status =IOConnectCallStructMethod ( + hostsmc_connect, +SMC_HANDLE_EVENT , + &in, +sizeof (struct AppleSMCParam ), + &out, + &out_size + ); + +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to read OSK0 from host-AppleSMC" ); + goto error_ioconnect_close; + } +strncpy (*host_osk, (const char *) out.bytes,32 ); + + in.key = ('OSK1' ); + in.data_size =sizeof (out.bytes); + in.command =SMC_READ_KEY ; + status =IOConnectCallStructMethod ( + hostsmc_connect, +SMC_HANDLE_EVENT , + &in, +sizeof (struct AppleSMCParam ), + &out, + &out_size + ); +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to read OSK1 from host-AppleSMC" ); + goto error_ioconnect_close; + } +strncpy ((*host_osk) +32 , (const char *) out.bytes,32 ); + +IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_CLOSE , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL ); +IOServiceClose (hostsmc_connect); +return true; + +error_ioconnect_close: +IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_CLOSE , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL ); +error_ioservice_close: +IOServiceClose (hostsmc_connect); + +error_osk_buffer_free: +g_free (*host_osk); +return false; +} +#else +static bool applesmc_read_host_osk (char **output_key,Error **errp) +{ +error_setg (errp,"isa-applesmc.hostosk ignored: " +"unsupported on non-Apple hosts" ); +return false; +} +#endif +static void applesmc_isa_realize (DeviceState *dev,Error **errp) { -AppleSMCState *s =APPLE_SMC (dev); +AppleSMCState *s =APPLE_SMC (dev); +Error *err =NULL ;memory_region_init_io (&s->io_data,OBJECT (s), &applesmc_data_io_ops, s,"applesmc-data" ,1 );
@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { +warn_report ("isa-applesmc.osk is shadowed " +"by isa-applesmc.hostosk" ); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + } +if (!s->osk || (strlen (s->osk) !=64 )) {warn_report ("Using AppleSMC with invalid key" ); s->osk = default_osk;
@@ -344,6 +496,7 @@ static Property applesmc_isa_properties[] = {DEFINE_PROP_UINT32 (APPLESMC_PROP_IO_BASE , AppleSMCState, iobase,APPLESMC_DEFAULT_IOBASE ),DEFINE_PROP_STRING ("osk" , AppleSMCState, osk), +DEFINE_PROP_BOOL ("hostosk" , AppleSMCState, hostosk_flag, false), DEFINE_PROP_END_OF_LIST(), };
Signature · 1 line
2.23.0
Quoted 15 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial use
Quoted 7 lines
Guest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>
There was a similar proposal on the mailing list by Pedro Torres recently. Please copy everyone who contributed to that email thread in your patch submission in addition to everyone who commented on previous versions of your own submission.
Also, this is definitely not "trivial" material. Trivial means spelling or super obvious fixes. This one is an actual feature :). I've removed qemu-trivial@ from the copy list.
Quoted 45 lines
--- hw/misc/applesmc.c | 155 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 1 deletion(-)hw/misc/applesmc.c +19
-0@@ -37,6 +37,11 @@#include "qemu/module.h" #include "qemu/timer.h" #include "qom/object.h" +#include "qapi/error.h" + +#if defined(__APPLE__) +#include <IOKit/IOKitLib.h> +#endif /* #define DEBUG_SMC */ @@ -108,6 +113,7 @@ struct AppleSMCState {uint8_t data_len;uint8_t data_pos;uint8_t data[255 ]; +bool hostosk_flag;char *osk; QLIST_HEAD(, AppleSMCData) data_def; };@@ -312,9 +318,136 @@ static const MemoryRegionOps applesmc_err_io_ops = { }, }; +#if defined(__APPLE__) +/* +* Based on +* https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/ +*/ +enum { +SMC_CLIENT_OPEN =0 , +SMC_CLIENT_CLOSE =1 , +SMC_HANDLE_EVENT =2 , +SMC_READ_KEY =5 +}; + +struct AppleSMCParam {
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 343
Quoted 10 lines
hw/misc/applesmc.c +10
-0+uint32_t key; +uint8_t pad0[22 ]; +IOByteCount data_size; +uint8_t pad1[10 ]; +uint8_t command; +uint32_t pad2; +uint8_t bytes[32 ]; +}; + +static bool applesmc_read_host_osk (char **host_osk,Error **errp)
Please just provide a buffer to write the OSK into (char *host_osk) to the function.
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 352
Quoted 9 lines
hw/misc/applesmc.c +9
-0+{ +assert (host_osk !=NULL ); + +io_service_t hostsmc_service =IO_OBJECT_NULL ; +io_connect_t hostsmc_connect =IO_OBJECT_NULL ; +size_t out_size =sizeof (struct AppleSMCParam ); +IOReturn status = kIOReturnError; +struct AppleSMCParam in = {0 }; +struct AppleSMCParam out = {0 };
Can in and out be the same variable?
Quoted 24 lines
hw/misc/applesmc.c +24
-0+ +/* OSK key size + '\0' */ + *host_osk =g_malloc0 (65 ); + (*host_osk)[64 ] ='\0' ; + + hostsmc_service =IOServiceGetMatchingService (kIOMasterPortDefault, +IOServiceMatching ("AppleSMC" )); +if (hostsmc_service ==IO_OBJECT_NULL ) { +error_setg (errp,"Unable to get host-AppleSMC service" ); + goto error_osk_buffer_free; + } + + status =IOServiceOpen (hostsmc_service, +mach_task_self (), +1 , + &hostsmc_connect); +if (status != kIOReturnSuccess || hostsmc_connect ==IO_OBJECT_NULL ) { +error_setg (errp,"Unable to open host-AppleSMC service" ); + goto error_osk_buffer_free; + } + + status = IOConnectCallMethod( + hostsmc_connect, + SMC_CLIENT_OPEN,
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 386
Quoted 10 lines
hw/misc/applesmc.c +10
-0+NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL + ); +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to connect to host-AppleSMC" ); + goto error_ioservice_close; + } + + in.key = ('OSK0' ); + in.data_size =sizeof (out.bytes); + in.command =SMC_READ_KEY ;
Since you know all these beforehand, can't you just create two struct AppleSMCParam - one for osk0 and one for osk1? Then just shoot them off here:
struct AppleSMCParam cmd[2] = {
{
.key = ('OSK0'),
.data_size = sizeof(cmd[0].bytes),
.command = SMC_READ_KEY,
}, {
.key = ('OSK1'),
.data_size = sizeof(cmd[0].bytes),
.command = SMC_READ_KEY,
},
};for (i = 0; i < ARRAY_SIZE(in); i++) {
IOConnectCallStructMethod(hostsmc_connect, SMC_HANDLE_EVENT, cmd[i], sizeof(cmd[i]), cmd[i], &out_size); if (out_size != sizeof(cmd[i])) {
goto err;
}
}
Quoted 4 lines
hw/misc/applesmc.c +4
-0+ status = IOConnectCallStructMethod( + hostsmc_connect, + SMC_HANDLE_EVENT, + &in,
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 400
Quoted 10 lines
hw/misc/applesmc.c +10
-0+sizeof (struct AppleSMCParam ), + &out, + &out_size + ); + +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to read OSK0 from host-AppleSMC" ); + goto error_ioconnect_close; + } +strncpy (*host_osk, (const char *) out.bytes,32 );
The OSK is not a string (well, it is, but technically it isn't). Just treat it as opaque 32 bytes of memory. Memcpy is what you want here.
Quoted 40 lines
hw/misc/applesmc.c +40
-0+ + in.key = ('OSK1' ); + in.data_size =sizeof (out.bytes); + in.command =SMC_READ_KEY ; + status =IOConnectCallStructMethod ( + hostsmc_connect, +SMC_HANDLE_EVENT , + &in, +sizeof (struct AppleSMCParam ), + &out, + &out_size + ); +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to read OSK1 from host-AppleSMC" ); + goto error_ioconnect_close; + } +strncpy ((*host_osk) +32 , (const char *) out.bytes,32 ); + +IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_CLOSE , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL ); +IOServiceClose (hostsmc_connect); +return true; + +error_ioconnect_close: +IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_CLOSE , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL ); +error_ioservice_close: +IOServiceClose (hostsmc_connect); + +error_osk_buffer_free: +g_free (*host_osk); + return false; +} +#else +static bool applesmc_read_host_osk (char **output_key,Error **errp) +{
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 449
Quoted 10 lines
hw/misc/applesmc.c +7
-1+error_setg (errp,"isa-applesmc.hostosk ignored: " +"unsupported on non-Apple hosts" ); + return false; +} +#endif +static void applesmc_isa_realize (DeviceState *dev,Error **errp) { -AppleSMCState *s =APPLE_SMC (dev); +AppleSMCState *s =APPLE_SMC (dev);
Why the whitespace change here?
Quoted 16 lines
hw/misc/applesmc.c +9
-0+Error *err =NULL ;memory_region_init_io (&s->io_data,OBJECT (s), &applesmc_data_io_ops, s,"applesmc-data" ,1 );@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "
hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 484
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }
This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.
Alex
Quoted 12 lines
hw/misc/applesmc.c +2
-0+if (!s->osk || (strlen (s->osk) !=64 )) {warn_report ("Using AppleSMC with invalid key" ); s->osk = default_osk;@@ -344,6 +496,7 @@ static Property applesmc_isa_properties[] = {DEFINE_PROP_UINT32 (APPLESMC_PROP_IO_BASE , AppleSMCState, iobase,APPLESMC_DEFAULT_IOBASE ),DEFINE_PROP_STRING ("osk" , AppleSMCState, osk), +DEFINE_PROP_BOOL ("hostosk" , AppleSMCState, hostosk_flag, false), DEFINE_PROP_END_OF_LIST(), };
пн, 25 окт. 2021 г. в 13:13, Alexander Graf <[email protected]>:
Quoted 24 lines · Vladislav Yaroshchuk
Quoted 15 lines
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useQuoted 5 lines
Guest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on
https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Quoted 1 line
Quoted 9 lines
Quoted 1 line
Signed-off-by Vladislav Yaroshchuk <[email protected]>There was a similar proposal on the mailing list by Pedro Torres recently. Please copy everyone who contributed to that email thread in your patch submission in addition to everyone who commented on previous versions of your own submission.
I understood that I'd missed the already submitted patch by Pedro Torres. I should have queried 'applesmc' instead of 'isa-applesmc' to find his patch. I've checked the mailing discussion and found some useful things to fix, thank you.
Quoted 60 lines
Also, this is definitely not "trivial" material. Trivial means spelling or super obvious fixes. This one is an actual feature :). I've removed qemu-trivial@ from the copy list.
My mistake, won't make the same next time :)
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops =
Quoted 29 lines
--- hw/misc/applesmc.c | 155 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 1 deletion(-)hw/misc/applesmc.c +6
-0@@ -37,6 +37,11 @@#include "qemu/module.h" #include "qemu/timer.h" #include "qom/object.h" +#include "qapi/error.h" + +#if defined(__APPLE__) +#include <IOKit/IOKitLib.h> +#endif /* #define DEBUG_SMC */ @@ -108,6 +113,7 @@ struct AppleSMCState {uint8_t data_len;uint8_t data_pos;uint8_t data[255 ]; +bool hostosk_flag;char *osk; QLIST_HEAD(, AppleSMCData) data_def; };@@ -312,9 +318,136 @@ static const MemoryRegionOps applesmc_err_io_ops ={
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = {
Quoted 7 lines
hw/misc/applesmc.c +4
-0}, }; +#if defined(__APPLE__) +/* +* Based on +* https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Quoted 15 lines
hw/misc/applesmc.c +15
-0+*/ +enum { +SMC_CLIENT_OPEN =0 , +SMC_CLIENT_CLOSE =1 , +SMC_HANDLE_EVENT =2 , +SMC_READ_KEY =5 +}; + +struct AppleSMCParam { +uint32_t key; +uint8_t pad0[22 ]; +IOByteCount data_size; +uint8_t pad1[10 ]; +uint8_t command; +uint32_t pad2;
Quoted 10 lines
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 343
Quoted 4 lines
hw/misc/applesmc.c +4
-0+uint8_t bytes[32 ]; +}; + +static bool applesmc_read_host_osk (char **host_osk,Error **errp)Please just provide a buffer to write the OSK into (char
*host_osk) to the function.
Thank you, I will fix this.
Quoted 15 lines
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 352
Quoted 10 lines
hw/misc/applesmc.c +9
-0+{ +assert (host_osk !=NULL ); + +io_service_t hostsmc_service =IO_OBJECT_NULL ; +io_connect_t hostsmc_connect =IO_OBJECT_NULL ; +size_t out_size =sizeof (struct AppleSMCParam ); +IOReturn status = kIOReturnError; +struct AppleSMCParam in = {0 }; +struct AppleSMCParam out = {0 };Can in and out be the same variable?
Checked, we can use one variable for in and out.
Quoted 55 lines
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 364
Quoted 7 lines
hw/misc/applesmc.c +7
-0+ +/* OSK key size + '\0' */ + *host_osk =g_malloc0 (65 ); + (*host_osk)[64 ] ='\0' ; + + hostsmc_service = IOServiceGetMatchingService(kIOMasterPortDefault, +
IOServiceMatching("AppleSMC"));hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = {
Quoted 10 lines
hw/misc/applesmc.c +10
-0+if (hostsmc_service ==IO_OBJECT_NULL ) { +error_setg (errp,"Unable to get host-AppleSMC service" ); + goto error_osk_buffer_free; + } + + status =IOServiceOpen (hostsmc_service, +mach_task_self (), +1 , + &hostsmc_connect); + if (status != kIOReturnSuccess || hostsmc_connect ==
IO_OBJECT_NULL) {Quoted 7 lines
hw/misc/applesmc.c +7
-0+error_setg (errp,"Unable to open host-AppleSMC service" ); + goto error_osk_buffer_free; + } + + status = IOConnectCallMethod( + hostsmc_connect, + SMC_CLIENT_OPEN,hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 386
Quoted 10 lines
hw/misc/applesmc.c +10
-0+NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL + ); +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to connect to host-AppleSMC" ); + goto error_ioservice_close; + } + + in.key = ('OSK0' ); + in.data_size =sizeof (out.bytes); + in.command =SMC_READ_KEY ;Since you know all these beforehand, can't you just create two struct AppleSMCParam - one for osk0 and one for osk1? Then just shoot them off here:
struct AppleSMCParam cmd[2] = { { .key = ('OSK0'), .data_size = sizeof(cmd[0].bytes), .command = SMC_READ_KEY, }, { .key = ('OSK1'), .data_size = sizeof(cmd[0].bytes), .command = SMC_READ_KEY, }, };
Quoted 9 lines
for (i = 0; i <
ARRAY_SIZE(in); i++) {
IOConnectCallStructMethod(hostsmc_connect,SMC_HANDLE_EVENT,cmd[i], sizeof(cmd[i]), cmd[i], &out_size); if (out_size != sizeof(cmd[i])) { goto err; } }
A good idea, I'll rewrite the code using this approach, thank you!
Quoted 16 lines
Quoted 4 lines
hw/misc/applesmc.c +4
-0+ status = IOConnectCallStructMethod( + hostsmc_connect, + SMC_HANDLE_EVENT, + &in,hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 400
Quoted 10 lines
hw/misc/applesmc.c +10
-0+sizeof (struct AppleSMCParam ), + &out, + &out_size + ); + +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to read OSK0 from host-AppleSMC" ); + goto error_ioconnect_close; + } +strncpy (*host_osk, (const char *) out.bytes,32 );
Quoted 4 lines
The OSK is not a string (well, it is, but technically it isn't). Just treat it as opaque 32 bytes of memory. Memcpy is what you want here.
Yes, agree with you, fixing it now.
Quoted 44 lines
Quoted 44 lines
hw/misc/applesmc.c +44
-0+ + in.key = ('OSK1' ); + in.data_size =sizeof (out.bytes); + in.command =SMC_READ_KEY ; + status =IOConnectCallStructMethod ( + hostsmc_connect, +SMC_HANDLE_EVENT , + &in, +sizeof (struct AppleSMCParam ), + &out, + &out_size + ); +if (status != kIOReturnSuccess) { +error_setg (errp,"Unable to read OSK1 from host-AppleSMC" ); + goto error_ioconnect_close; + } +strncpy ((*host_osk) +32 , (const char *) out.bytes,32 ); + +IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_CLOSE , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL ); +IOServiceClose (hostsmc_connect); +return true; + +error_ioconnect_close: +IOConnectCallMethod ( + hostsmc_connect, +SMC_CLIENT_CLOSE , +NULL ,0 ,NULL ,0 ,NULL ,NULL ,NULL ,NULL ); +error_ioservice_close: +IOServiceClose (hostsmc_connect); + +error_osk_buffer_free: +g_free (*host_osk); + return false; +} +#else +static bool applesmc_read_host_osk (char **output_key,Error **errp) +{ +error_setg (errp,"isa-applesmc.hostosk ignored: " +"unsupported on non-Apple hosts" ); +return false; +}
Quoted 10 lines
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = { · line 449
Quoted 6 lines
hw/misc/applesmc.c +3
-1+#endif +static void applesmc_isa_realize (DeviceState *dev,Error **errp) { -AppleSMCState *s =APPLE_SMC (dev); +AppleSMCState *s =APPLE_SMC (dev);Why the whitespace change here?
It was used to align *s and *err. Seems disaccorded with QEMU code style, I'll remove the space in the next patch.
Quoted 32 lines
hw/misc/applesmc.c static const MemoryRegionOps applesmc_err_io_ops = {
Quoted 3 lines
hw/misc/applesmc.c +1
-0+Error *err =NULL ; memory_region_init_io(&s->io_data, OBJECT(s),
&applesmc_data_io_ops, s,hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev,
Quoted 2 lines
hw/misc/applesmc.c +0
-0"applesmc-data", 1);@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev,Error **errp)
Quoted 11 lines
hw/misc/applesmc.c +8
-0isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 484
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }This part is yucky. A few things:
Quoted 7 lines
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of
Quoted 3 lines
course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.
Sounds reasonable, let's use osk=host, drop hostosk=on and enable this feature on Apple-macOS hosts by default.
Quoted 1 line
Alex
Quoted 14 lines
Quoted 14 lines
hw/misc/applesmc.c +2
-0+if (!s->osk || (strlen (s->osk) !=64 )) {warn_report ("Using AppleSMC with invalid key" ); s->osk = default_osk;@@ -344,6 +496,7 @@ static Property applesmc_isa_properties[] = {DEFINE_PROP_UINT32 (APPLESMC_PROP_IO_BASE , AppleSMCState, iobase,APPLESMC_DEFAULT_IOBASE ),DEFINE_PROP_STRING ("osk" , AppleSMCState, osk), +DEFINE_PROP_BOOL ("hostosk" , AppleSMCState, hostosk_flag, false), DEFINE_PROP_END_OF_LIST(), };
Signature · 3 lines
Best Regards, Vladislav Yaroshchuk
Quoted 51 lines · Alexander Graf
Quoted 35 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>hw/misc/applesmc.c +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }This part is yucky. A few things:
Quoted 9 lines
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
IMHO, using an explicit separate parameter is the right approach.
We just need to make sure we report an error properly via the 'Error **errp' parameter to this method instead of warn_report or error_report_err, when the user gives a non-sensible combination, or if reading the host value fails.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 58 lines · Daniel P. Berrangé
Quoted 48 lines · Alexander Graf
Quoted 34 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>hw/misc/applesmc.c +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }This part is yucky. A few things:
Quoted 9 lines
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Quoted 6 lines
IMHO, using an explicit separate parameter is the right approach.
We just need to make sure we report an error properly via the 'Error **errp' parameter to this method instead of
warn_reportorerror_report_err, when the user gives a non-sensible combination, or if reading the host value fails.
How about we change the default behavior altogether? Either you pass osk as argument, then that takes precedence. Or you don't, then we'll try to grab it from the host. If that fails, we error out (instead of the warn today).
That's a slight behavioral change, but I don't think anyone really wants to run the applesmc device without OSK in the first place. And at least we wouldn't break users that have working osk= configs.
Alex
Quoted 60 lines · Alexander Graf
Quoted 58 lines · Daniel P. Berrangé
Quoted 57 lines · Alexander Graf
Quoted 34 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>hw/misc/applesmc.c +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.
Quoted 5 lines
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Essentially to answer the question
"Does this QEMU support OSK passthrough from the host"
Mgmt apps like libvirt introspect using various query-XXX QMP commands. For devices, the typical approach is to ask for the list of properties the device supports. If we're just accepting a new magic value on an existing property there is no way to query for existance of that feature. If we add a "host-osk=bool" parameter introspectability is trivially satisfied.
Quoted 8 lines
Quoted 6 lines
IMHO, using an explicit separate parameter is the right approach.
We just need to make sure we report an error properly via the 'Error **errp' parameter to this method instead of
warn_reportorerror_report_err, when the user gives a non-sensible combination, or if reading the host value fails.
Quoted 7 lines
How about we change the default behavior altogether? Either you pass osk as argument, then that takes precedence. Or you don't, then we'll try to grab it from the host. If that fails, we error out (instead of the warn today).
That's a slight behavioral change, but I don't think anyone really wants to run the applesmc device without OSK in the first place. And at least we wouldn't break users that have working osk= configs.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 64 lines · Daniel P. Berrangé
Quoted 57 lines · Alexander Graf
Quoted 56 lines · Daniel P. Berrangé
Quoted 55 lines · Alexander Graf
Quoted 33 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>hw/misc/applesmc.c +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.Quoted 4 lines
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Essentially to answer the question
Quoted 8 lines
"Does this QEMU support OSK passthrough from the host"
Mgmt apps like libvirt introspect using various query-XXX QMP commands. For devices, the typical approach is to ask for the list of properties the device supports. If we're just accepting a new magic value on an existing property there is no way to query for existance of that feature. If we add a "host-osk=bool" parameter introspectability is trivially satisfied.
Ok, the only flow that remains sensible in that case to me sounds like the following:
if (s->osk) {
/* Use osk */
} else if (s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else if (can_use_host_osk) {
/* See if we can extract the key from the host. If not, fall back to old behavior */ } else {
/* Old fallback behavior */
}
Alex
Quoted 76 lines · Alexander Graf
Quoted 64 lines · Daniel P. Berrangé
Quoted 57 lines · Alexander Graf
Quoted 56 lines · Daniel P. Berrangé
Quoted 55 lines · Alexander Graf
Quoted 33 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>hw/misc/applesmc.c +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp)isa_register_ioport (&s->parent_obj, &s->io_err, s->iobase +APPLESMC_ERR_PORT ); +if (s->hostosk_flag) { +/* +* Property 'hostosk' has higher priority than 'osk' +* and shadows it. +* Free user-provided 'osk' property value +*/ +if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "hw/misc/applesmc.c static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
hw/misc/applesmc.c +10
-0+ "by isa-applesmc.hostosk"); +g_free (s->osk); + } + +if (!applesmc_read_host_osk (&s->osk, &err)) { +/* On host OSK retrieval error report a warning */ +error_report_err (err); + s->osk = default_osk; + } + }This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.Quoted 4 lines
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Essentially to answer the question
Quoted 8 lines
"Does this QEMU support OSK passthrough from the host"
Mgmt apps like libvirt introspect using various query-XXX QMP commands. For devices, the typical approach is to ask for the list of properties the device supports. If we're just accepting a new magic value on an existing property there is no way to query for existance of that feature. If we add a "host-osk=bool" parameter introspectability is trivially satisfied.
Quoted 2 lines
Ok, the only flow that remains sensible in that case to me sounds like the following:
Just need an extra check upfront:
if (s->osk && s->use_hoist_osk)
error_setg(errp, ...)
else
Quoted 2 lines
if (
s->osk) {
/* Use osk */
This should fail hard if the provided value is the wrong length - currently it falls back with a warning IIUC.
Quoted 7 lines
} else if (
s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else if (can_use_host_osk) {
/* See if we can extract the key from the host. If not, fall back to old behavior */
} else {
/* Old fallback behavior */
Was this old fallback behaviour actually useful ? IIUC it means it is using
static char default_osk[64] = "This is a dummy key. Enter the real key "
"using the -osk parameter";
which obviously isn't a valid key that will work with any gust OS that cares. I guess it at least let QEMU startup, but any the guest OS that checks the key will be unhappy.
If if don't think default_osk is actually useful, then we could simplify further to
if (s->osk && s->use_host_osk) {
error_setg(errp, ...)
} else if (s->osk) {
/* Use osk. Fail hard if invalid (ie wrong length) */
} else if (s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else {
/* try to use host OSK, fail hard if we can't find it or non-OS-X build */}
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 107 lines · Daniel P. Berrangé
Quoted 73 lines · Alexander Graf
Quoted 63 lines · Daniel P. Berrangé
Quoted 57 lines · Alexander Graf
Quoted 56 lines · Daniel P. Berrangé
Quoted 55 lines · Alexander Graf
Quoted 33 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>(quoted diff) +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp) isa_register_ioport(&s->parent_obj, &s->io_err, s->iobase + APPLESMC_ERR_PORT); + if (s->hostosk_flag) { + /* + * Property 'hostosk' has higher priority than 'osk' + * and shadows it. + * Free user-provided 'osk' property value + */ + if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "Review static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
(quoted diff) +10
-0+ "by isa-applesmc.hostosk"); + g_free(s->osk); + } + + if (!applesmc_read_host_osk(&s->osk, &err)) { + /* On host OSK retrieval error report a warning */ + error_report_err(err); + s->osk = default_osk; + } + }This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.Quoted 3 lines
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Essentially to answer the question
Quoted 8 lines
"Does this QEMU support OSK passthrough from the host"
Mgmt apps like libvirt introspect using various query-XXX QMP commands. For devices, the typical approach is to ask for the list of properties the device supports. If we're just accepting a new magic value on an existing property there is no way to query for existance of that feature. If we add a "host-osk=bool" parameter introspectability is trivially satisfied.
Quoted 2 lines
Ok, the only flow that remains sensible in that case to me sounds like the following:
Just need an extra check upfront:
if (s->osk && s->use_hoist_osk) error_setg(errp, ...) elseQuoted 2 lines
if (
s->osk) {
/* Use osk */This should fail hard if the provided value is the wrong length - currently it falls back with a warning IIUC.
Quoted 7 lines
} else if (
s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else if (can_use_host_osk) {
/* See if we can extract the key from the host. If not, fall back to old
behavior */
} else {
/* Old fallback behavior */Was this old fallback behaviour actually useful ? IIUC it means it is using
static char default_osk[64] = "This is a dummy key. Enter the real key "
"using the -osk parameter";which obviously isn't a valid key that will work with any gust OS that cares. I guess it at least let QEMU startup, but any the guest OS that checks the key will be unhappy.
If if don't think
default_oskis actually useful, then we could simplify further to
Quoted 9 lines
if (s->osk && s->use_host_osk) {
error_setg(errp, ...)
} else if (s->osk) {
/* Use osk. Fail hard if invalid (ie wrong length) */
} else if (s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else {
/* try to use host OSK, fail hard if we can't find it or non-OS-X build */
}In the example above, use_host_osk=on and use_host_osk=off yield the exact same behavior, so we don't need the switch, no?
Alex
Quoted 119 lines · Alexander Graf
Quoted 106 lines · Daniel P. Berrangé
Quoted 73 lines · Alexander Graf
Quoted 63 lines · Daniel P. Berrangé
Quoted 57 lines · Alexander Graf
Quoted 56 lines · Daniel P. Berrangé
Quoted 55 lines · Alexander Graf
Quoted 33 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>(quoted diff) +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp) isa_register_ioport(&s->parent_obj, &s->io_err, s->iobase + APPLESMC_ERR_PORT); + if (s->hostosk_flag) { + /* + * Property 'hostosk' has higher priority than 'osk' + * and shadows it. + * Free user-provided 'osk' property value + */ + if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "Review static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
(quoted diff) +10
-0+ "by isa-applesmc.hostosk"); + g_free(s->osk); + } + + if (!applesmc_read_host_osk(&s->osk, &err)) { + /* On host OSK retrieval error report a warning */ + error_report_err(err); + s->osk = default_osk; + } + }This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.Quoted 3 lines
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Essentially to answer the question
Quoted 8 lines
"Does this QEMU support OSK passthrough from the host"
Mgmt apps like libvirt introspect using various query-XXX QMP commands. For devices, the typical approach is to ask for the list of properties the device supports. If we're just accepting a new magic value on an existing property there is no way to query for existance of that feature. If we add a "host-osk=bool" parameter introspectability is trivially satisfied.
Quoted 2 lines
Ok, the only flow that remains sensible in that case to me sounds like the following:
Just need an extra check upfront:
if (
s->osk&&s->use_hoist_osk)error_setg(errp, ...)else
Quoted 2 lines
if (
s->osk) {
/* Use osk */This should fail hard if the provided value is the wrong length - currently it falls back with a warning IIUC.
Quoted 7 lines
} else if (
s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else if (can_use_host_osk) {
/* See if we can extract the key from the host. If not, fall back to old
behavior */
} else {
/* Old fallback behavior */Was this old fallback behaviour actually useful ? IIUC it means it is using
static char default_osk[64] = "This is a dummy key. Enter the real key "
"using the -osk parameter";which obviously isn't a valid key that will work with any gust OS that cares. I guess it at least let QEMU startup, but any the guest OS that checks the key will be unhappy.
If if don't think
default_oskis actually useful, then we could simplify further toQuoted 9 lines
if (s->osk && s->use_host_osk) { error_setg(errp, ...) } else if (s->osk) { /* Use osk. Fail hard if invalid (ie wrong length) */ } else if (s->use_host_osk) { /* Use host OSK. Fail hard if we can't find it */ } else { /* try to use host OSK, fail hard if we can't find it or non-OS-X build */ }
Quoted 2 lines
In the example above, use_host_osk=on and use_host_osk=off yield the exact same behavior, so we don't need the switch, no?
Hmm, I forgot about machine type back compat. From a strict pov, if we change the default it should only be for the 6.2.0 machine type, with old machines keeping the current 'default_osk' behaviour.
IOW, for 6.2.0 machine use_host_osk=on as default, and for < 6.2.0, use_host_osk=off as default .
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 117 lines · Daniel P. Berrangé
Quoted 116 lines · Alexander Graf
Quoted 114 lines · Daniel P. Berrangé
Quoted 66 lines · Alexander Graf
Quoted 65 lines · Daniel P. Berrangé
Quoted 57 lines · Alexander Graf
Quoted 56 lines · Daniel P. Berrangé
Quoted 55 lines · Alexander Graf
Quoted 33 lines · Vladislav Yaroshchuk
On Apple hosts we can read AppleSMC OSK key directly from host's SMC and forward this value to QEMU Guest.
Usage:
-device isa-applesmc,hostosk=onApple licence allows use and run up to two additional copies or instances of macOS operating within virtual operating system environments on each Apple-branded computer that is already running the Apple Software, for purposes of:
- software development
- testing during software development
- using macOS Server
- personal, non-commercial useGuest macOS requires AppleSMC with correct OSK. The most legal way to pass it to the Guest is to forward the key from host SMC without any value exposion.
Based on https://web.archive.org/web/20200103161737/osxbook.com/book/bonus/chapter7/tpmdrmmyth/
Signed-off-by Vladislav Yaroshchuk <[email protected]>(quoted diff) +8
-0@@ -331,6 +464,25 @@ static void applesmc_isa_realize(DeviceState *dev, Error **errp) isa_register_ioport(&s->parent_obj, &s->io_err, s->iobase + APPLESMC_ERR_PORT); + if (s->hostosk_flag) { + /* + * Property 'hostosk' has higher priority than 'osk' + * and shadows it. + * Free user-provided 'osk' property value + */ + if (s->osk) { + warn_report("isa-applesmc.osk is shadowed "Review static void applesmc_isa_realize(DeviceState *dev, Error **errp) · line 483
Quoted 10 lines
(quoted diff) +10
-0+ "by isa-applesmc.hostosk"); + g_free(s->osk); + } + + if (!applesmc_read_host_osk(&s->osk, &err)) { + /* On host OSK retrieval error report a warning */ + error_report_err(err); + s->osk = default_osk; + } + }This part is yucky. A few things:
1) QEMU in general does not fail user requested operations silently. If the user explicitly asked to read the host OSK and we couldn't, it must propagate that error.
2) In tandem to the above, I think the only consistent CX is to make both options mutually exclusive. The easiest way to achieve that IMHO would be to overload the "osk" property. If it is "host", then use the host one.
3) Should we make "osk"="host" the default on macOS as well then? Of course, that one should *not* fail hard when it can't read the key, because it's an implicit request rather than an explicit one.Quoted 3 lines
Quoted 2 lines
The problem with using a magic string value for the existing "osk" parameter is that this is not introspectable by management apps.
What introspectability would you like to have?
Essentially to answer the question
"Does this QEMU support OSK passthrough from the host"
Quoted 8 lines
Quoted 6 lines
Mgmt apps like libvirt introspect using various query-XXX QMP commands. For devices, the typical approach is to ask for the list of properties the device supports. If we're just accepting a new magic value on an existing property there is no way to query for existance of that feature. If we add a "host-osk=bool" parameter introspectability is trivially satisfied.
Ok, the only flow that remains sensible in that case to me sounds like the following:
Just need an extra check upfront:
if (s->osk && s->use_hoist_osk) error_setg(errp, ...) elseQuoted 2 lines
if (
s->osk) {
/* Use osk */This should fail hard if the provided value is the wrong length - currently it falls back with a warning IIUC.
Quoted 7 lines
} else if (
s->use_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else if (can_use_host_osk) {
/* See if we can extract the key from the host. If not, fall back to old
behavior */
} else {
/* Old fallback behavior */Was this old fallback behaviour actually useful ? IIUC it means it is using
static char default_osk[64] = "This is a dummy key. Enter the real key "
"using the -osk parameter";which obviously isn't a valid key that will work with any gust OS that cares. I guess it at least let QEMU startup, but any the guest OS that checks the key will be unhappy.
If if don't think
default_oskis actually useful, then we could simplify further toif (s->osk && s->use_host_osk) { error_setg(errp, ...) } else if (s->osk) { /* Use osk. Fail hard if invalid (ie wrong length) */ } else if (s->use_host_osk) { /* Use host OSK. Fail hard if we can't find it */ } else { /* try to use host OSK, fail hard if we can't find it or non-OS-X build */ }
Quoted 8 lines
Quoted 2 lines
In the example above, use_host_osk=on and use_host_osk=off yield the exact same behavior, so we don't need the switch, no?
Hmm, I forgot about machine type back compat. From a strict pov, if we change the default it should only be for the 6.2.0 machine type, with old machines keeping the current '
default_osk' behaviour.IOW, for 6.2.0 machine use_host_osk=on as default, and for < 6.2.0, use_host_osk=off as default .
Yes, and then the fallback case (no osk, no use_host_osk) would keep installing the dummy key.
However, it means that if you create an applesmc VM today with just -M pc and then update it to a newer QEMU version, your existing command line would no longer work because you then have s->osk && s->use_host_osk set.
How about we make the ordering absolutely clear? If you define s->osk, that's the one we use. Fallback is either host (default on new instance types) or dummy (default for old instance types).
That way we only break existing VM definitions without modeled machine version that use -device applesmc without passing in an OSK. That's a user base I'm ok breaking.
if (s->osk) {
/* Use osk. Fail hard if invalid (ie wrong length) */
} else if (s->fallback_to_host_osk) {
/* Use host OSK. Fail hard if we can't find it */
} else {
/* Old dummy key behavior */
}In addition, new -M pc and -M q35 definitions set applesmc.fallback-to-host-osk=on by default.
Alex