Skip to contentSkip to conversation

powerpc/64s/interrupt: Fix check_return_regs_valid false positive

PATCH Applied Nicholas Piggin 2 participants 2 messages Oct 26, 2021 – Nov 2, 2021 PowerPC

lore
Share & tools
lore

Nicholas Piggin

author reviewer
#0 lore raw

PATCH 1/1 powerpc/64s/interrupt: Fix check_return_regs_valid false positive

The check_return_regs_valid can cause a false positive if the return regs are marked as norestart and they are an HSRR type interrupt, because the low bit in the bottom of regs->trap causes interrupt type matching to fail.

This can occcur for example on bare metal with a HV privileged doorbell interrupt that causes a signal, but do_signal returns early because get_signal() fails, and takes the "No signal to deliver" path. In this case no signal was delivered so the return location is not changed so return SRRs are not invalidated, yet set_trap_norestart is called, which messes up the match. Building go-1.16.6 is known to reproduce this.

Fix it by using the TRAP() accessor which masks out the low bit.

Fixes 6eaaf9de3599 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
---
 arch/powerpc/kernel/interrupt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/interrupt.c +1 -1
index de10a2697258..835b626cd476 100644
@@ -266,7 +266,7 @@ static void check_return_regs_valid(struct pt_regs *regs)
 	if (trap_is_scv(regs))
 		return;
 
-	trap = regs->trap;
+	trap = TRAP(regs);
 	// EE in HV mode sets HSRRs like 0xea0
 	if (cpu_has_feature(CPU_FTR_HVMODE) && trap == INTERRUPT_EXTERNAL)
 		trap = 0xea0;
Signature · 1 line
2.23.0
#1 lore raw
Quoted 5 lines · Nicholas Piggin

The check_return_regs_valid can cause a false positive if the return regs are marked as norestart and they are an HSRR type interrupt, because the low bit in the bottom of regs->trap causes interrupt type matching to fail.

Quoted 8 lines

This can occcur for example on bare metal with a HV privileged doorbell interrupt that causes a signal, but do_signal returns early because get_signal() fails, and takes the "No signal to deliver" path. In this case no signal was delivered so the return location is not changed so return SRRs are not invalidated, yet set_trap_norestart is called, which messes up the match. Building go-1.16.6 is known to reproduce this.

[...]

Applied to powerpc/next.

[1/1] powerpc/64s/interrupt: Fix check_return_regs_valid false positive

      https://git.kernel.org/powerpc/c/4a5cb51f3db4be547225a4bce7a43d41b231382b

cheers