x86: clk: Add config option to enable 48MHz fixed fch clk
Subsystems (2)
v2 cover x86: clk: Add config option to enable 48MHz fixed fch clk
changes since v1:
- Remove unsused variable
Ajit Kumar Pandey (5):
x86: clk: Add config option to enable 48MHz fixed fch clk
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
ACPI: APD: Add a fmw property clk-name
clk: x86: Use dynamic con_id string during clk registration
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
drivers/acpi/acpi_apd.c | 11 +++++++++-- drivers/clk/x86/Kconfig | 5 +++++ drivers/clk/x86/clk-fch.c | 26 +++++++++++++------------- include/linux/platform_data/clk-fch.h | 2 +- 4 files changed, 28 insertions(+), 16 deletions(-)
Signature · 1 line
2.25.1
PATCH RESEND v2 1/5 x86: clk: Add config option to enable 48MHz fixed fch clk
At present 48MHz clk support is only enabled for RV architecture using "is-rv" device property initialized from boot loader. This limit 48MHz fixed clock gate support to RV platform unless we add similar device property in boot loader for other architecture.
Add Kernel config option to enable 48MHz fixed clk gate registration with clock framework. This enahanced flexibility to enable 48MHz fch clock support on any platforms by simply enabling kernel config. Also replace RV with FIXED as generic naming convention across platforms.
--- drivers/clk/x86/Kconfig | 5 +++++ drivers/clk/x86/clk-fch.c | 22 +++++++++++----------- 2 files changed, 16 insertions(+), 11 deletions(-)
drivers/clk/x86/Kconfig +5 -0
@@ -6,3 +6,8 @@ config CLK_LGM_CGU help Clock Generation Unit(CGU) driver for Intel Lightning Mountain(LGM) network processor SoC. + +config CLK_FIXED_FCH + bool "AMD FCH controller fixed 48MHz CLK support" + help + Enable this option for 48MHz fixed mclk support on AMD platforms.
drivers/clk/x86/clk-fch.c +11 -11
@@ -26,9 +26,9 @@#define ST_CLK_GATE 3#define ST_MAX_CLKS 4 -#define RV_CLK_48M 0 -#define RV_CLK_GATE 1 -#define RV_MAX_CLKS 2 +#define CLK_48M_FIXED 0 +#define CLK_GATE_FIXED 1 +#define CLK_MAX_FIXED 2static const char *const clk_oscout1_parents[] = {"clk48MHz" ,"clk25MHz" };static struct clk_hw *hws[ST_MAX_CLKS ];
@@ -41,7 +41,7 @@ static int fch_clk_probe(struct platform_device *pdev)if (!fch_data || !fch_data->base)return -EINVAL ; -if (!fch_data->is_rv) { +if (!IS_ENABLED (CONFIG_CLK_FIXED_FCH )) { hws[ST_CLK_48M ] =clk_hw_register_fixed_rate (NULL ,"clk48MHz" ,NULL ,0 ,48000000 ); hws[ST_CLK_25M] = clk_hw_register_fixed_rate(NULL, "clk25MHz",
@@ -61,14 +61,14 @@ static int fch_clk_probe(struct platform_device *pdev)devm_clk_hw_register_clkdev (&pdev->dev, hws[ST_CLK_GATE ],"oscout1" ,NULL ); }else { - hws[RV_CLK_48M ] =clk_hw_register_fixed_rate (NULL ,"clk48MHz" , + hws[CLK_48M_FIXED ] =clk_hw_register_fixed_rate (NULL ,"clk48MHz" ,NULL ,0 ,48000000 ); - hws[RV_CLK_GATE ] =clk_hw_register_gate (NULL ,"oscout1" , + hws[CLK_GATE_FIXED ] =clk_hw_register_gate (NULL ,"oscout1" ,"clk48MHz" ,0 , fch_data->base +MISCCLKCNTL1 ,OSCCLKENB ,CLK_GATE_SET_TO_DISABLE ,NULL ); -devm_clk_hw_register_clkdev (&pdev->dev, hws[RV_CLK_GATE ], +devm_clk_hw_register_clkdev (&pdev->dev, hws[CLK_GATE_FIXED ],"oscout1" ,NULL ); }
@@ -78,11 +78,11 @@ static int fch_clk_probe(struct platform_device *pdev)static int fch_clk_remove (struct platform_device *pdev) {int i, clks; -struct fch_clk_data *fch_data; - - fch_data =dev_get_platdata (&pdev->dev); - clks = fch_data->is_rv ?RV_MAX_CLKS :ST_MAX_CLKS ; +if (IS_ENABLED (CONFIG_CLK_FIXED_FCH )) + clks =CLK_MAX_FIXED ; +else + clks =ST_MAX_CLKS ;for (i =0 ; i < clks; i++)clk_hw_unregister (hws[i]);
Signature · 1 line
2.25.1
PATCH RESEND v2 2/5 drivers: acpi: acpi_apd: Remove unused device property "is-rv"
In reply to Ajit Kumar PandeyInitially "is-rv" device property is added for 48MHz fixed clock support on Raven or RV architecture. It's unused now as we moved to clock config based selection to extend such support on others architecture. This change removed unused code from acpi driver.
--- drivers/acpi/acpi_apd.c | 3 --- include/linux/platform_data/clk-fch.h | 1 - 2 files changed, 4 deletions(-)
drivers/acpi/acpi_apd.c +0 -3
@@ -87,9 +87,6 @@ static int fch_misc_setup(struct apd_private_data *pdata)if (ret <0 )return -ENOENT ; -if (!acpi_dev_get_property (adev,"is-rv" ,ACPI_TYPE_INTEGER , &obj)) - clk_data->is_rv = obj->integer.value; -list_for_each_entry (rentry, &resource_list, node) { clk_data->base =devm_ioremap (&adev->dev, rentry->res->start,resource_size (rentry->res));
include/linux/platform_data/clk-fch.h +0 -1
@@ -12,7 +12,6 @@struct fch_clk_data {void __iomem *base; -u32 is_rv; };#endif /* __CLK_FCH_H */
Signature · 1 line
2.25.1
Rafael J. Wysocki
maintainerRe: [PATCH v2 RESEND 2/5] drivers: acpi: acpi_apd: Remove unused device property "is-rv"
Quoted 7 lines · Ajit Kumar Pandey
Initially "is-rv" device property is added for 48MHz fixed clock support on Raven or RV architecture. It's unused now as we moved to clock config based selection to extend such support on others architecture. This change removed unused code from acpi driver.
Signed-off-by Ajit Kumar Pandey <[email protected]>
Is this and the [3/5] applicable without the [1/5]?
If so, I can pick them up once they are approved by some other AMD folks, preferably Mario.
Quoted 34 lines
--- drivers/acpi/acpi_apd.c | 3 --- include/linux/platform_data/clk-fch.h | 1 - 2 files changed, 4 deletions(-)drivers/acpi/acpi_apd.c +0
-3@@ -87,9 +87,6 @@ static int fch_misc_setup(struct apd_private_data *pdata)if (ret <0 )return -ENOENT ; -if (!acpi_dev_get_property (adev,"is-rv" ,ACPI_TYPE_INTEGER , &obj)) - clk_data->is_rv = obj->integer.value; -list_for_each_entry (rentry, &resource_list, node) { clk_data->base =devm_ioremap (&adev->dev, rentry->res->start,resource_size (rentry->res));include/linux/platform_data/clk-fch.h +0
-2@@ -12,7 +12,6 @@struct fch_clk_data {void __iomem *base; -u32 is_rv; };#endif /* __CLK_FCH_H */ --2.25.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH v2 RESEND 2/5] drivers: acpi: acpi_apd: Remove unused device property "is-rv"
Quoted 13 lines · Stephen Boyd
[CAUTION: External Email]
Quoting Rafael J. Wysocki (2021-11-05 08:02:26)
Quoted 10 lines
Quoted 7 lines · Ajit Kumar Pandey
Initially "is-rv" device property is added for 48MHz fixed clock support on Raven or RV architecture. It's unused now as we moved to clock config based selection to extend such support on others architecture. This change removed unused code from acpi driver.
Signed-off-by Ajit Kumar Pandey <[email protected]>
Quoted 8 lines
Quoted 4 lines
Is this and the [3/5] applicable without the [1/5]?
If so, I can pick them up once they are approved by some other AMD folks, preferably Mario.
I'm still lost why we're putting this decision to have some clk or not into
Kconfig.
I agree it's kind of weird to select clock based on Kconfig but only reason to put Kconfig based selection is that this clk support required on some older platforms where BIOS or bootloader change isn't feasible. We have only one consumer for this 48MHzclk i.e audio drivers and idea is that this config shouldn't be user-selectable one and automatically
select from audio machine driver which uses this clk.
RE: [PATCH v2 RESEND 2/5] drivers: acpi: acpi_apd: Remove unused device property "is-rv"
In reply to Rafael J. Wysocki[Public]
Quoted 23 lines
-----Original Message-----
From: Rafael J. Wysocki <[email protected]>
Sent: Friday, November 5, 2021 10:02
To: Pandey, Ajit Kumar <[email protected]>
Cc: Stephen Boyd <[email protected]>; linux-clk <[email protected]>; Mukunda, Vijendar <[email protected]>; Deucher, Alexander <[email protected]>; Hiregoudar, Basavaraj <[email protected]>; Dommati, Sunil-kumar <Sunil- [email protected]>; Rafael J. Wysocki <[email protected]>; Len Brown <[email protected]>; open list:ACPI <[email protected]>; open list <[email protected]>; Limonciello, Mario <[email protected]>
Subject: Re: [PATCH v2 RESEND 2/5] drivers: acpi:acpi_apd: Remove unused device property "is-rv"Quoted 6 lines · Ajit Kumar Pandey
Initially "is-rv" device property is added for 48MHz fixed clock support on Raven or RV architecture. It's unused now as we moved to clock config based selection to extend such support on others architecture. This change removed unused code from acpi driver.
Quoted 6 lines
Quoted 1 line
Signed-off-by Ajit Kumar Pandey <[email protected]>Is this and the [3/5] applicable without the [1/5]?
If so, I can pick them up once they are approved by some other AMD folks, preferably Mario.
I had some offline conversations with Ajit, and gave them some other ideas instead of Kconfig based clock settings. Let's wait for the result of those tries.
Quoted 37 lines
drivers/acpi/acpi_apd.c static int fch_misc_setup(struct apd_private_data
Quoted 11 lines
--- drivers/acpi/acpi_apd.c | 3 --- include/linux/platform_data/clk-fch.h | 1 - 2 files changed, 4 deletions(-)drivers/acpi/acpi_apd.c +0
-0@@ -87,9 +87,6 @@ static int fch_misc_setup(struct apd_private_data*pdata)
Review
Quoted 10 lines
drivers/acpi/acpi_apd.c +0
-3if (ret <0 )return -ENOENT ; -if (!acpi_dev_get_property (adev,"is-rv" ,ACPI_TYPE_INTEGER , &obj)) - clk_data->is_rv = obj->integer.value; -list_for_each_entry (rentry, &resource_list, node) { clk_data->base =devm_ioremap (&adev->dev, rentry->res->start,resource_size (rentry->res));(quoted diff) +0
-0
b/include/linux/platform_data/clk-fch.hQuoted 14 lines
index
b9f682459f08..850ca776156d100644include/linux/platform_data/clk-fch.h +0
-2@@ -12,7 +12,6 @@struct fch_clk_data {void __iomem *base; -u32 is_rv; };#endif /* __CLK_FCH_H */ --2.25.1
PATCH RESEND v2 3/5 ACPI: APD: Add a fmw property clk-name
In reply to Ajit Kumar PandeyAdd a new device property to fetch clk-name from firmware.
--- drivers/acpi/acpi_apd.c | 10 ++++++++++ include/linux/platform_data/clk-fch.h | 1 + 2 files changed, 11 insertions(+)
drivers/acpi/acpi_apd.c +10 -0
@@ -87,6 +87,16 @@ static int fch_misc_setup(struct apd_private_data *pdata)if (ret <0 )return -ENOENT ; +if (!acpi_dev_get_property (adev,"clk-name" ,ACPI_TYPE_STRING , &obj)) { + clk_data->name =devm_kzalloc (&adev->dev, obj->string.length, +GFP_KERNEL ); + +strcpy (clk_data->name, obj->string.pointer); + }else { +/* Set default name to mclk if entry missing in firmware */ + clk_data->name ="mclk" ; + } +list_for_each_entry (rentry, &resource_list, node) { clk_data->base =devm_ioremap (&adev->dev, rentry->res->start,resource_size (rentry->res));
include/linux/platform_data/clk-fch.h +1 -0
@@ -12,6 +12,7 @@struct fch_clk_data {void __iomem *base; +char *name; };#endif /* __CLK_FCH_H */
Signature · 1 line
2.25.1
PATCH RESEND v2 4/5 clk: x86: Use dynamic con_id string during clk registration
In reply to Ajit Kumar PandeyReplace hard coded con_id string with fch_data->name. We have clk consumers looking up with different clock names, hence use dynamic con_id string during clk lookup registration. fch_data->name will be initialized in acpi driver based on fmw property value.
--- drivers/clk/x86/clk-fch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/x86/clk-fch.c +1 -1
@@ -69,7 +69,7 @@ static int fch_clk_probe(struct platform_device *pdev) OSCCLKENB, CLK_GATE_SET_TO_DISABLE, NULL);devm_clk_hw_register_clkdev (&pdev->dev, hws[CLK_GATE_FIXED ], -"oscout1" ,NULL ); + fch_data->name,NULL ); }return 0 ;
Signature · 1 line
2.25.1
PATCH RESEND v2 5/5 clk: x86: Fix clk_gate_flags for RV_CLK_GATE
In reply to Ajit Kumar PandeyIn AMD's SoC we have to clear bit for disabling 48MHz oscillator clock gate. Remove CLK_GATE_SET_TO_DISABLE flag for proper enable and disable of 48MHz clock.
--- drivers/clk/x86/clk-fch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/x86/clk-fch.c +1 -1
@@ -66,7 +66,7 @@ static int fch_clk_probe(struct platform_device *pdev) hws[CLK_GATE_FIXED ] =clk_hw_register_gate (NULL ,"oscout1" ,"clk48MHz" ,0 , fch_data->base +MISCCLKCNTL1 , -OSCCLKENB ,CLK_GATE_SET_TO_DISABLE ,NULL ); +OSCCLKENB ,0 ,NULL );devm_clk_hw_register_clkdev (&pdev->dev, hws[CLK_GATE_FIXED ], fch_data->name,NULL );
Signature · 1 line
2.25.1