Skip to contentSkip to conversation

bugfix for multi process of hns3 PMD

PATCH In review Min Hu (Connor) 2 participants 7 messages Nov 2, 2021 – Nov 4, 2021 Network drivers

lore
Share & tools
lore

Min Hu (Connor)

author
#0 lore raw

cover bugfix for multi process of hns3 PMD

This patch set contains bugfix and code optimization for multi process of hns3 PMD.

Huisong Li (4):
net/hns3: decrease the count when secondary process exits net/hns3: fix MP action register and unregister net/hns3: fix lack of unregistering MP action for secondary net/hns3: refactor multi-process initialization

 drivers/net/hns3/hns3_ethdev.c    | 34 +++++-------
 drivers/net/hns3/hns3_ethdev_vf.c | 35 +++++--------
 drivers/net/hns3/hns3_mp.c        | 86 ++++++++++++++++++++++---------
 drivers/net/hns3/hns3_mp.h        | 11 ++--
 4 files changed, 98 insertions(+), 68 deletions(-)
Signature · 1 line
2.33.0
author
#1 lore raw

PATCH 1/4 net/hns3: decrease the count when secondary process exits

From: Huisong Li <[email protected]>

The "secondary_cnt" will be increased when a secondary process initialized. But the value of this variable is not decreased when the secondary process exits, which causes the primary process senses that the secondary process still exists. As a result, the primary process fails to send messages to the secondary process after the secondary process exits.

Fixes 23d4b61fee5d ("net/hns3: support multiple process")
Cc [email protected]
Signed-off-by Huisong Li <[email protected]>
Signed-off-by Min Hu (Connor) <[email protected]>
---
 drivers/net/hns3/hns3_ethdev.c    | 10 +++++++---
 drivers/net/hns3/hns3_ethdev_vf.c | 10 +++++++---
 drivers/net/hns3/hns3_mp.c        |  4 +++-
 3 files changed, 17 insertions(+), 7 deletions(-)
drivers/net/hns3/hns3_ethdev.c +7 -3
index 56eca03833..2dd9881040 100644
@@ -5849,8 +5849,10 @@ hns3_dev_close(struct rte_eth_dev *eth_dev)
 	struct hns3_hw *hw = &hns->hw;
 	int ret = 0;
 
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
 		return 0;
+	}
 
 	if (hw->adapter_state == HNS3_NIC_STARTED)
 		ret = hns3_dev_stop(eth_dev);

@@ -7376,7 +7378,7 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 				     "process, ret = %d", ret);
 			goto err_mp_init_secondary;
 		}
-		hw->secondary_cnt++;
+		__atomic_fetch_add(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
 		hns3_tx_push_init(eth_dev);
 		return 0;
 	}

@@ -7479,8 +7481,10 @@ hns3_dev_uninit(struct rte_eth_dev *eth_dev)
 
 	PMD_INIT_FUNC_TRACE();
 
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
 		return 0;
+	}
 
 	if (hw->adapter_state < HNS3_NIC_CLOSING)
 		hns3_dev_close(eth_dev);
drivers/net/hns3/hns3_ethdev_vf.c +7 -3
index 675db44e85..0f7eeb1d7e 100644
@@ -1892,8 +1892,10 @@ hns3vf_dev_close(struct rte_eth_dev *eth_dev)
 	struct hns3_hw *hw = &hns->hw;
 	int ret = 0;
 
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
 		return 0;
+	}
 
 	if (hw->adapter_state == HNS3_NIC_STARTED)
 		ret = hns3vf_dev_stop(eth_dev);

@@ -2684,7 +2686,7 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 					  "process, ret = %d", ret);
 			goto err_mp_init_secondary;
 		}
-		hw->secondary_cnt++;
+		__atomic_fetch_add(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
 		hns3_tx_push_init(eth_dev);
 		return 0;
 	}

@@ -2786,8 +2788,10 @@ hns3vf_dev_uninit(struct rte_eth_dev *eth_dev)
 
 	PMD_INIT_FUNC_TRACE();
 
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
 		return 0;
+	}
 
 	if (hw->adapter_state < HNS3_NIC_CLOSING)
 		hns3vf_dev_close(eth_dev);
drivers/net/hns3/hns3_mp.c +3 -1
index cd514ac29c..c28598a53a 100644
@@ -150,8 +150,10 @@ mp_req_on_rxtx(struct rte_eth_dev *dev, enum hns3_mp_req_type type)
 	int ret;
 	int i;
 
-	if (rte_eal_process_type() == RTE_PROC_SECONDARY || !hw->secondary_cnt)
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY ||
+		__atomic_load_n(&hw->secondary_cnt, __ATOMIC_RELAXED) == 0)
 		return;
+
 	if (!mp_req_type_is_valid(type)) {
 		hns3_err(hw, "port %u unknown request (req_type %d)",
 			 dev->data->port_id, type);
Signature · 1 line
2.33.0
author
#2 lore raw

PATCH 2/4 net/hns3: fix MP action register and unregister

In reply to Min Hu (Connor)

From: Huisong Li <[email protected]>

The multi-process has the following problems:
1) After a port in primary process is closed, the mp action of the process is unregistered. which will cause that other device in the primary process cannot respond to requests from secondary processes.
2) Because variable "hns3_inited" is set to true without returning an initial value, the mp action cannot be registered again after it is unregistered.
3) The mp action of primary and secondary process need to be registered only once regardless of port numbers in the process. That's what variable "hns3_inited" does. But the variable is difficult to understand.

This patch adds a hns3_process_local_data structure to resolve above problems.

Fixes 9570b1fdbdad ("net/hns3: check multi-process action register result")
Fixes 23d4b61fee5d ("net/hns3: support multiple process")
Signed-off-by Huisong Li <[email protected]>
Signed-off-by Min Hu (Connor) <[email protected]>
---
 drivers/net/hns3/hns3_ethdev.c    |  2 ++
 drivers/net/hns3/hns3_ethdev_vf.c |  2 ++
 drivers/net/hns3/hns3_mp.c        | 37 ++++++++++++++++++-------------
 drivers/net/hns3/hns3_mp.h        |  7 ++++++
 4 files changed, 33 insertions(+), 15 deletions(-)
drivers/net/hns3/hns3_ethdev.c +2 -0
index 2dd9881040..658baf9ec3 100644
@@ -7379,6 +7379,7 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 			goto err_mp_init_secondary;
 		}
 		__atomic_fetch_add(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
+		process_data.eth_dev_cnt++;
 		hns3_tx_push_init(eth_dev);
 		return 0;
 	}

@@ -7390,6 +7391,7 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 			     ret);
 		goto err_mp_init_primary;
 	}
+	process_data.eth_dev_cnt++;
 
 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
 	hns->is_vf = false;
drivers/net/hns3/hns3_ethdev_vf.c +2 -0
index 0f7eeb1d7e..7286a858a9 100644
@@ -2687,6 +2687,7 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 			goto err_mp_init_secondary;
 		}
 		__atomic_fetch_add(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
+		process_data.eth_dev_cnt++;
 		hns3_tx_push_init(eth_dev);
 		return 0;
 	}

@@ -2698,6 +2699,7 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 			     ret);
 		goto err_mp_init_primary;
 	}
+	process_data.eth_dev_cnt++;
 
 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
 	hns->is_vf = true;
drivers/net/hns3/hns3_mp.c +22 -15
index c28598a53a..1a79d249b8 100644
@@ -12,7 +12,8 @@
 #include "hns3_rxtx.h"
 #include "hns3_mp.h"
 
-static bool hns3_inited;
+/* local data for primary or secondary process. */
+struct hns3_process_local_data process_data;
 
 /*
  * Initialize IPC message.

@@ -230,14 +231,15 @@ int hns3_mp_init_primary(void)
 {
 	int ret;
 
-	if (!hns3_inited) {
-		/* primary is allowed to not support IPC */
-		ret = rte_mp_action_register(HNS3_MP_NAME, mp_primary_handle);
-		if (ret && rte_errno != ENOTSUP)
-			return ret;
+	if (process_data.init_done)
+		return 0;
 
-		hns3_inited = true;
-	}
+	/* primary is allowed to not support IPC */
+	ret = rte_mp_action_register(HNS3_MP_NAME, mp_primary_handle);
+	if (ret && rte_errno != ENOTSUP)
+		return ret;
+
+	process_data.init_done = true;
 
 	return 0;
 }

@@ -247,8 +249,12 @@ int hns3_mp_init_primary(void)
  */
 void hns3_mp_uninit_primary(void)
 {
-	if (hns3_inited)
+	process_data.eth_dev_cnt--;
+
+	if (process_data.eth_dev_cnt == 0) {
 		rte_mp_action_unregister(HNS3_MP_NAME);
+		process_data.init_done = false;
+	}
 }
 
 /*

@@ -258,13 +264,14 @@ int hns3_mp_init_secondary(void)
 {
 	int ret;
 
-	if (!hns3_inited) {
-		ret = rte_mp_action_register(HNS3_MP_NAME, mp_secondary_handle);
-		if (ret)
-			return ret;
+	if (process_data.init_done)
+		return 0;
 
-		hns3_inited = true;
-	}
+	ret = rte_mp_action_register(HNS3_MP_NAME, mp_secondary_handle);
+	if (ret)
+		return ret;
+
+	process_data.init_done = true;
 
 	return 0;
 }
drivers/net/hns3/hns3_mp.h +7 -0
index e0e4aeaf6c..b49532f985 100644
@@ -5,6 +5,13 @@
 #ifndef _HNS3_MP_H_
 #define _HNS3_MP_H_
 
+/* Local data for primary or secondary process. */
+struct hns3_process_local_data {
+	bool init_done; /* Process action register completed flag. */
+	int eth_dev_cnt; /* Ethdev count under the current process. */
+};
+extern struct hns3_process_local_data process_data;
+
 void hns3_mp_req_start_rxtx(struct rte_eth_dev *dev);
 void hns3_mp_req_stop_rxtx(struct rte_eth_dev *dev);
 void hns3_mp_req_start_tx(struct rte_eth_dev *dev);
Signature · 1 line
2.33.0
#3 lore raw

Re: [dpdk-dev] [PATCH 2/4] net/hns3: fix MP action register and unregister

Quoted 22 lines · Min Hu (Connor)

From: Huisong Li <[email protected]>

The multi-process has the following problems:
1) After a port in primary process is closed, the mp action of the process is unregistered. which will cause that other device in the primary process cannot respond to requests from secondary processes.
2) Because variable "hns3_inited" is set to true without returning an initial value, the mp action cannot be registered again after it is unregistered.
3) The mp action of primary and secondary process need to be registered only once regardless of port numbers in the process. That's what variable "hns3_inited" does. But the variable is difficult to understand.

This patch adds a hns3_process_local_data structure to resolve above problems.

Fixes 9570b1fdbdad ("net/hns3: check multi-process action register result")
Fixes 23d4b61fee5d ("net/hns3: support multiple process")
Signed-off-by Huisong Li <[email protected]>
Signed-off-by Min Hu (Connor) <[email protected]>

<...>

drivers/net/hns3/hns3_mp.c line 17

Quoted 8 lines
drivers/net/hns3/hns3_mp.c +2 -1
@@ -12,7 +12,8 @@
  #include "hns3_rxtx.h"
  #include "hns3_mp.h"
 
-static bool hns3_inited;
+/* local data for primary or secondary process. */
+struct hns3_process_local_data process_data;

I was here to complain about non-static global variable that doesn't have driver namespace ('hns3_'), but I can see later patches are converting this variable to a static global, so I guess it is OK to have it temporarily.

author
#4 lore raw

PATCH 3/4 net/hns3: fix lack of unregistering MP action for secondary

In reply to Min Hu (Connor)

From: Huisong Li <[email protected]>

This patch fixes lack of unregistering MP action for secondary process when PMD is closed.

Fixes 9570b1fdbdad ("net/hns3: check multi-process action register result")
Fixes 23d4b61fee5d ("net/hns3: support multiple process")
Signed-off-by Huisong Li <[email protected]>
Signed-off-by Min Hu (Connor) <[email protected]>
---
 drivers/net/hns3/hns3_ethdev.c    | 6 ++++--
 drivers/net/hns3/hns3_ethdev_vf.c | 6 ++++--
 drivers/net/hns3/hns3_mp.c        | 5 +----
 drivers/net/hns3/hns3_mp.h        | 2 +-
 4 files changed, 10 insertions(+), 9 deletions(-)
drivers/net/hns3/hns3_ethdev.c +4 -2
index 658baf9ec3..96ab0c4f6c 100644
@@ -5851,6 +5851,7 @@ hns3_dev_close(struct rte_eth_dev *eth_dev)
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
 		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
+		hns3_mp_uninit();
 		return 0;
 	}
 

@@ -5867,7 +5868,7 @@ hns3_dev_close(struct rte_eth_dev *eth_dev)
 	hns3_uninit_pf(eth_dev);
 	hns3_free_all_queues(eth_dev);
 	rte_free(hw->reset.wait_data);
-	hns3_mp_uninit_primary();
+	hns3_mp_uninit();
 	hns3_warn(hw, "Close port %u finished", hw->data->port_id);
 
 	return ret;

@@ -7462,7 +7463,7 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 	rte_free(hw->reset.wait_data);
 
 err_init_reset:
-	hns3_mp_uninit_primary();
+	hns3_mp_uninit();
 
 err_mp_init_primary:
 err_mp_init_secondary:

@@ -7485,6 +7486,7 @@ hns3_dev_uninit(struct rte_eth_dev *eth_dev)
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
 		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
+		hns3_mp_uninit();
 		return 0;
 	}
drivers/net/hns3/hns3_ethdev_vf.c +4 -2
index 7286a858a9..633201a2c2 100644
@@ -1894,6 +1894,7 @@ hns3vf_dev_close(struct rte_eth_dev *eth_dev)
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
 		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
+		hns3_mp_uninit();
 		return 0;
 	}
 

@@ -1909,7 +1910,7 @@ hns3vf_dev_close(struct rte_eth_dev *eth_dev)
 	hns3vf_uninit_vf(eth_dev);
 	hns3_free_all_queues(eth_dev);
 	rte_free(hw->reset.wait_data);
-	hns3_mp_uninit_primary();
+	hns3_mp_uninit();
 	hns3_warn(hw, "Close port %u finished", hw->data->port_id);
 
 	return ret;

@@ -2768,7 +2769,7 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 	rte_free(hw->reset.wait_data);
 
 err_init_reset:
-	hns3_mp_uninit_primary();
+	hns3_mp_uninit();
 
 err_mp_init_primary:
 err_mp_init_secondary:

@@ -2792,6 +2793,7 @@ hns3vf_dev_uninit(struct rte_eth_dev *eth_dev)
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
 		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
+		hns3_mp_uninit();
 		return 0;
 	}
drivers/net/hns3/hns3_mp.c +1 -4
index 1a79d249b8..6d33bf49cd 100644
@@ -244,10 +244,7 @@ int hns3_mp_init_primary(void)
 	return 0;
 }
 
-/*
- * Un-initialize by primary process.
- */
-void hns3_mp_uninit_primary(void)
+void hns3_mp_uninit(void)
 {
 	process_data.eth_dev_cnt--;
drivers/net/hns3/hns3_mp.h +1 -1
index b49532f985..5738ab74a5 100644
@@ -18,7 +18,7 @@ void hns3_mp_req_start_tx(struct rte_eth_dev *dev);
 void hns3_mp_req_stop_tx(struct rte_eth_dev *dev);
 
 int hns3_mp_init_primary(void);
-void hns3_mp_uninit_primary(void);
+void hns3_mp_uninit(void);
 int hns3_mp_init_secondary(void);
 
 #endif /* _HNS3_MP_H_ */
Signature · 1 line
2.33.0
author
#5 lore raw

PATCH 4/4 net/hns3: refactor multi-process initialization

In reply to Min Hu (Connor)

From: Huisong Li <[email protected]>

Currently, the logic of the PF and VF initialization codes for multiple process is the same. A common function can be extracted to initialize and unload multiple process.

Signed-off-by Huisong Li <[email protected]>
Signed-off-by Min Hu (Connor) <[email protected]>
---
 drivers/net/hns3/hns3_ethdev.c    | 34 +++++------------
 drivers/net/hns3/hns3_ethdev_vf.c | 33 +++++-----------
 drivers/net/hns3/hns3_mp.c        | 62 ++++++++++++++++++++++++-------
 drivers/net/hns3/hns3_mp.h        |  6 +--
 4 files changed, 68 insertions(+), 67 deletions(-)
drivers/net/hns3/hns3_ethdev.c +9 -25
index 96ab0c4f6c..ccae75baa0 100644
@@ -5850,8 +5850,7 @@ hns3_dev_close(struct rte_eth_dev *eth_dev)
 	int ret = 0;
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
-		hns3_mp_uninit();
+		hns3_mp_uninit(eth_dev);
 		return 0;
 	}
 

@@ -5868,7 +5867,7 @@ hns3_dev_close(struct rte_eth_dev *eth_dev)
 	hns3_uninit_pf(eth_dev);
 	hns3_free_all_queues(eth_dev);
 	rte_free(hw->reset.wait_data);
-	hns3_mp_uninit();
+	hns3_mp_uninit(eth_dev);
 	hns3_warn(hw, "Close port %u finished", hw->data->port_id);
 
 	return ret;

@@ -7372,28 +7371,15 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 	hns3_set_rxtx_function(eth_dev);
 	eth_dev->dev_ops = &hns3_eth_dev_ops;
 	eth_dev->rx_queue_count = hns3_rx_queue_count;
+	ret = hns3_mp_init(eth_dev);
+	if (ret)
+		goto err_mp_init;
+
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-		ret = hns3_mp_init_secondary();
-		if (ret) {
-			PMD_INIT_LOG(ERR, "Failed to init for secondary "
-				     "process, ret = %d", ret);
-			goto err_mp_init_secondary;
-		}
-		__atomic_fetch_add(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
-		process_data.eth_dev_cnt++;
 		hns3_tx_push_init(eth_dev);
 		return 0;
 	}
 
-	ret = hns3_mp_init_primary();
-	if (ret) {
-		PMD_INIT_LOG(ERR,
-			     "Failed to init for primary process, ret = %d",
-			     ret);
-		goto err_mp_init_primary;
-	}
-	process_data.eth_dev_cnt++;
-
 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
 	hns->is_vf = false;
 	hw->data = eth_dev->data;

@@ -7463,10 +7449,9 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
 	rte_free(hw->reset.wait_data);
 
 err_init_reset:
-	hns3_mp_uninit();
+	hns3_mp_uninit(eth_dev);
 
-err_mp_init_primary:
-err_mp_init_secondary:
+err_mp_init:
 	eth_dev->dev_ops = NULL;
 	eth_dev->rx_pkt_burst = NULL;
 	eth_dev->rx_descriptor_status = NULL;

@@ -7485,8 +7470,7 @@ hns3_dev_uninit(struct rte_eth_dev *eth_dev)
 	PMD_INIT_FUNC_TRACE();
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
-		hns3_mp_uninit();
+		hns3_mp_uninit(eth_dev);
 		return 0;
 	}
drivers/net/hns3/hns3_ethdev_vf.c +9 -24
index 633201a2c2..27701a919e 100644
@@ -1893,8 +1893,7 @@ hns3vf_dev_close(struct rte_eth_dev *eth_dev)
 	int ret = 0;
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
-		hns3_mp_uninit();
+		hns3_mp_uninit(eth_dev);
 		return 0;
 	}
 

@@ -1910,7 +1909,7 @@ hns3vf_dev_close(struct rte_eth_dev *eth_dev)
 	hns3vf_uninit_vf(eth_dev);
 	hns3_free_all_queues(eth_dev);
 	rte_free(hw->reset.wait_data);
-	hns3_mp_uninit();
+	hns3_mp_uninit(eth_dev);
 	hns3_warn(hw, "Close port %u finished", hw->data->port_id);
 
 	return ret;

@@ -2680,28 +2679,15 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 	hns3_set_rxtx_function(eth_dev);
 	eth_dev->dev_ops = &hns3vf_eth_dev_ops;
 	eth_dev->rx_queue_count = hns3_rx_queue_count;
+	ret = hns3_mp_init(eth_dev);
+	if (ret)
+		goto err_mp_init;
+
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-		ret = hns3_mp_init_secondary();
-		if (ret) {
-			PMD_INIT_LOG(ERR, "Failed to init for secondary "
-					  "process, ret = %d", ret);
-			goto err_mp_init_secondary;
-		}
-		__atomic_fetch_add(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
-		process_data.eth_dev_cnt++;
 		hns3_tx_push_init(eth_dev);
 		return 0;
 	}
 
-	ret = hns3_mp_init_primary();
-	if (ret) {
-		PMD_INIT_LOG(ERR,
-			     "Failed to init for primary process, ret = %d",
-			     ret);
-		goto err_mp_init_primary;
-	}
-	process_data.eth_dev_cnt++;
-
 	hw->adapter_state = HNS3_NIC_UNINITIALIZED;
 	hns->is_vf = true;
 	hw->data = eth_dev->data;

@@ -2769,10 +2755,9 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
 	rte_free(hw->reset.wait_data);
 
 err_init_reset:
-	hns3_mp_uninit();
+	hns3_mp_uninit(eth_dev);
 
-err_mp_init_primary:
-err_mp_init_secondary:
+err_mp_init:
 	eth_dev->dev_ops = NULL;
 	eth_dev->rx_pkt_burst = NULL;
 	eth_dev->rx_descriptor_status = NULL;

@@ -2793,7 +2778,7 @@ hns3vf_dev_uninit(struct rte_eth_dev *eth_dev)
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
 		__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
-		hns3_mp_uninit();
+		hns3_mp_uninit(eth_dev);
 		return 0;
 	}
drivers/net/hns3/hns3_mp.c +48 -14

92 lines not on this page · raw message

drivers/net/hns3/hns3_mp.h +2 -4
index 5738ab74a5..a74221d086 100644
@@ -10,15 +10,13 @@ struct hns3_process_local_data {
 	bool init_done; /* Process action register completed flag. */
 	int eth_dev_cnt; /* Ethdev count under the current process. */
 };
-extern struct hns3_process_local_data process_data;
 
 void hns3_mp_req_start_rxtx(struct rte_eth_dev *dev);
 void hns3_mp_req_stop_rxtx(struct rte_eth_dev *dev);
 void hns3_mp_req_start_tx(struct rte_eth_dev *dev);
 void hns3_mp_req_stop_tx(struct rte_eth_dev *dev);
 
-int hns3_mp_init_primary(void);
-void hns3_mp_uninit(void);
-int hns3_mp_init_secondary(void);
+int hns3_mp_init(struct rte_eth_dev *dev);
+void hns3_mp_uninit(struct rte_eth_dev *dev);
 
 #endif /* _HNS3_MP_H_ */
Signature · 1 line
2.33.0
#6 lore raw
In reply to Min Hu (Connor)
Quoted 9 lines · Min Hu (Connor)

This patch set contains bugfix and code optimization for multi process of hns3 PMD.

Huisong Li (4):
net/hns3: decrease the count when secondary process exits net/hns3: fix MP action register and unregister net/hns3: fix lack of unregistering MP action for secondary net/hns3: refactor multi-process initialization

Series applied to dpdk-next-net/main, thanks.