arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards
This patch fixes the Bluetooth on ROCK Pi 4 boards.
ROCK Pi 4 boards has BCM4345C5 and now it is supported on Mainline Linux, brcm,bcm43438-bt still working but observed the BT Audio issues with latest test.
So, use the BCM4345C5 compatible and its associated properties like clock-names as lpo and max-speed.
Attach vbat and vddio supply rails as well.
Signed-off-by Jagan Teki <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts | 7 +++++-- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts | 7 +++++-- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts | 7 +++++-- 3 files changed, 15 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts +5 -2
@@ -35,13 +35,16 @@ &uart0 { status = "okay"; bluetooth { - compatible = "brcm,bcm43438-bt"; + compatible = "brcm,bcm4345c5"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; };
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts +5 -2
@@ -34,13 +34,16 @@ &uart0 { status = "okay"; bluetooth { - compatible = "brcm,bcm43438-bt"; + compatible = "brcm,bcm4345c5"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; };
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts +5 -2
@@ -35,14 +35,17 @@ &uart0 { status = "okay"; bluetooth { - compatible = "brcm,bcm43438-bt"; + compatible = "brcm,bcm4345c5"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; };
Signature · 1 line
2.25.1