Skip to contentSkip to conversation

RDMA/mlx4: Do not fail the registration on port stats

PATCH Applied Jack Wang 3 participants 4 messages Nov 15, 2021 – Nov 17, 2021

Subsystems (2)
lore
Share & tools
lore

Jack Wang

author
#0 lore raw

PATCH 1/1 RDMA/mlx4: Do not fail the registration on port stats

If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver will fail the ib_setup_port_attrs, which is called from ib_register_device/enable_device_and_get, in the end leads to device not detected[1][2]

To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com/T/#t

Fixes 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
---
 drivers/infiniband/hw/mlx4/main.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/infiniband/hw/mlx4/main.c +15 -3
index f367f4a4abff..2ad9c6d12ac0 100644
@@ -2217,6 +2217,12 @@ static const struct ib_device_ops mlx4_ib_hw_stats_ops = {
 	.get_hw_stats = mlx4_ib_get_hw_stats,
 };
 
+
+static const struct ib_device_ops mlx4_ib_hw_stats_ops1 = {
+	.alloc_hw_device_stats = mlx4_ib_alloc_hw_device_stats,
+	.get_hw_stats = mlx4_ib_get_hw_stats,
+};
+
 static int mlx4_ib_alloc_diag_counters(struct mlx4_ib_dev *ibdev)
 {
 	struct mlx4_ib_diag_counters *diag = ibdev->diag_counters;
@@ -2229,9 +2235,15 @@ static int mlx4_ib_alloc_diag_counters(struct mlx4_ib_dev *ibdev)
 		return 0;
 
 	for (i = 0; i < MLX4_DIAG_COUNTERS_TYPES; i++) {
-		/* i == 1 means we are building port counters */
-		if (i && !per_port)
-			continue;
+		/* i == 1 means we are building port counters, set a different
+		 * stats ops without port stats callback.
+		 */
+		if (i && !per_port) {
+			ib_set_device_ops(&ibdev->ib_dev,
+					  &mlx4_ib_hw_stats_ops1);
+
+			return 0;
+		}
 
 		ret = __mlx4_ib_alloc_diag_counters(ibdev, &diag[i].name,
 						    &diag[i].offset,
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 11 lines · Jack Wang

If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver will fail the ib_setup_port_attrs, which is called from ib_register_device/enable_device_and_get, in the end leads to device not detected[1][2]

To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com/T/#t

Quoted 6 lines
Fixes 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
---
 drivers/infiniband/hw/mlx4/main.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

Just a nitpick, no need for a blank line between Fixes line and SOB.

Thanks,

author
#2 lore raw
Quoted 20 lines · Leon Romanovsky
Quoted 11 lines · Jack Wang

If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver will fail the ib_setup_port_attrs, which is called from ib_register_device/enable_device_and_get, in the end leads to device not detected[1][2]

To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com/T/#t

Quoted 6 lines
Fixes 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
---
 drivers/infiniband/hw/mlx4/main.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
Quoted 4 lines

Just a nitpick, no need for a blank line between Fixes line and SOB.

Thanks,

Thanks for the review, I will remember not to add the blank line next time.

maintainer Applied
#3 lore raw
In reply to Jack Wang
Quoted 11 lines · Jack Wang

If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver will fail the ib_setup_port_attrs, which is called from ib_register_device/enable_device_and_get, in the end leads to device not detected[1][2]

To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com/T/#t

Quoted 7 lines
Fixes 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
---
 drivers/infiniband/hw/mlx4/main.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

Applied to for-rc, thanks

Jason