fstests: btrfs/049: add regression test for compress-force mount options
PATCH v2 1/1 fstests: btrfs/049: add regression test for compress-force mount options
Since kernel commit d4088803f511 ("btrfs: subpage: make lzo_compress_pages() compatible"), lzo compression no longer respects the max compressed page limit, and can cause kernel crash.
The upstream fix is 6f019c0e0193 ("btrfs: fix a out-of-bound access in copy_compressed_data_to_page()").
This patch will add such regression test for all possible compress-force mount options, including lzo, zstd and zlib.
And since we're here, also make sure the content of the file matches after a mount cycle.
---
Changelog:
v2:
- Also test zlib and zstd
- Add file content verification check
--- tests/btrfs/049 | 56 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/049.out | 6 +++++ 2 files changed, 62 insertions(+) create mode 100755 tests/btrfs/049
tests/btrfs/049 new file +56 -0
@@ -0,0 +1,56 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 049 +# +# Test if btrfs will crash when using compress-force mount option against +# incompressible data +# +. ./common/preamble +_begin_fstest auto quick compress dangerous + +# Override the default cleanup function. +_cleanup() +{ + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_require_scratch + +pagesize=$(get_page_size) +workload() +{ + local compression + compression=$1 + + echo "=== Testing compress-force=$compression ===" + _scratch_mkfs -s "$pagesize">> $seqres.full + _scratch_mount -o compress-force="$compression" + $XFS_IO_PROG -f -c "pwrite -i /dev/urandom 0 $pagesize" \ + "$SCRATCH_MNT/file" > /dev/null + md5sum "$SCRATCH_MNT/file" > "$tmp.$compression" + + # When unpatched, compress-force=lzo would crash at data writeback + _scratch_cycle_mount + + # Make sure the content matches + md5sum -c "$tmp.$compression" | _filter_scratch + _scratch_unmount +} + +workload lzo +workload zstd +workload zlib + +# success, all done +status=0 +exit
tests/btrfs/049.out +6 -0
@@ -1 +1,7 @@ QA output created by 049 +=== Testing compress-force=lzo === +SCRATCH_MNT/file: OK +=== Testing compress-force=zstd === +SCRATCH_MNT/file: OK +=== Testing compress-force=zlib === +SCRATCH_MNT/file: OK
Signature · 1 line
2.34.0
Quoted 55 lines · Qu Wenruo
Since kernel commit
d4088803f511("btrfs: subpage: makelzo_compress_pages()compatible"), lzo compression no longer respects the max compressed page limit, and can cause kernel crash.The upstream fix is
6f019c0e0193("btrfs: fix a out-of-bound access incopy_compressed_data_to_page()").This patch will add such regression test for all possible compress-force mount options, including lzo, zstd and zlib.
And since we're here, also make sure the content of the file matches after a mount cycle.
Signed-off-by Qu Wenruo <[email protected]>---
Changelog:
v2:
- Also test zlib and zstd
- Add file content verification check--- tests/btrfs/049 | 56 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/049.out | 6 +++++ 2 files changed, 62 insertions(+) create mode 100755 tests/btrfs/049tests/btrfs/049 new file +23
-0@@ -0,0 +1,56 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 049 +# +# Test if btrfs will crash when using compress-force mount option against +# incompressible data +# +. ./common/preamble +_begin_fstest auto quick compress dangerous + +# Override the default cleanup function. +_cleanup() +{ + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/filter + +# real QA test starts here
tests/btrfs/049 line 33
Quoted 10 lines
tests/btrfs/049 new file +10
-0+ +# Modify as appropriate. +_supported_fs btrfs +_require_scratch + +pagesize=$(get_page_size) +workload() +{ + local compression + compression=$1
Could be shorter by doing it in one step:
local compression=$1
tests/btrfs/049 line 40
Quoted 7 lines
tests/btrfs/049 new file +7
-0+ + echo "=== Testing compress-force=$compression ===" + _scratch_mkfs -s "$pagesize">> $seqres.full + _scratch_mount -o compress-force="$compression" + $XFS_IO_PROG -f -c "pwrite -i /dev/urandom 0 $pagesize" \ + "$SCRATCH_MNT/file" > /dev/null + md5sum "$SCRATCH_MNT/file" > "$tmp.$compression"
This doesn't really check if everything we asked to write was actually written. pwrite(2), write(2), etc, return the number of bytes written, which can be less than what we asked for.
And using the checksum verification in that way, we are only checking that what we had before unmounting is the same after mounting again. I.e. we are not checking that what was actually written is what we have asked for.
We could do something like:
data=$(dd count=4096 bs=1 if=/dev/urandom)
echo -n "$data" > file
_scratch_cycle_mount
check that the the md5sum of file is the same as: echo -n "$data" | md5sum
As it is, the test is enough to trigger the original bug, but having such additional checks is more valuable IMO for the long run, and can help prevent other types of regressions too.
Thanks Qu.
Quoted 31 lines
tests/btrfs/049 new file +16
-0+ + # When unpatched, compress-force=lzo would crash at data writeback + _scratch_cycle_mount + + # Make sure the content matches + md5sum -c "$tmp.$compression" | _filter_scratch + _scratch_unmount +} + +workload lzo +workload zstd +workload zlib + +# success, all done +status=0 +exittests/btrfs/049.out +6
-1@@ -1 +1,7 @@ QA output created by 049 +=== Testing compress-force=lzo === +SCRATCH_MNT/file: OK +=== Testing compress-force=zstd === +SCRATCH_MNT/file: OK +=== Testing compress-force=zlib === +SCRATCH_MNT/file: OK --2.34.0
Signature · 3 lines
Filipe David Manana, “Whether you think you can, or you think you can't — you're right.”
Quoted 88 lines · Filipe Manana
Quoted 55 lines · Qu Wenruo
Since kernel commit
d4088803f511("btrfs: subpage: makelzo_compress_pages()compatible"), lzo compression no longer respects the max compressed page limit, and can cause kernel crash.The upstream fix is
6f019c0e0193("btrfs: fix a out-of-bound access incopy_compressed_data_to_page()").This patch will add such regression test for all possible compress-force mount options, including lzo, zstd and zlib.
And since we're here, also make sure the content of the file matches after a mount cycle.
Signed-off-by Qu Wenruo <[email protected]>---
Changelog:
v2:
- Also test zlib and zstd
- Add file content verification check--- tests/btrfs/049 | 56 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/049.out | 6 +++++ 2 files changed, 62 insertions(+)create mode 100755 tests/btrfs/049
tests/btrfs/049 new file +23
-0@@ -0,0 +1,56 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 049 +# +# Test if btrfs will crash when using compress-force mount option against +# incompressible data +# +. ./common/preamble +_begin_fstest auto quick compress dangerous + +# Override the default cleanup function. +_cleanup() +{ + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/filter + +# real QA test starts heretests/btrfs/049 line 33
Quoted 10 lines
tests/btrfs/049 new file +10
-0+ +# Modify as appropriate. +_supported_fs btrfs +_require_scratch + +pagesize=$(get_page_size) +workload() +{ + local compression + compression=$1Could be shorter by doing it in one step:
local compression=$1
tests/btrfs/049 line 40
Quoted 7 lines
tests/btrfs/049 new file +7
-0+ + echo "=== Testing compress-force=$compression ===" + _scratch_mkfs -s "$pagesize">> $seqres.full + _scratch_mount -o compress-force="$compression" + $XFS_IO_PROG -f -c "pwrite -i /dev/urandom 0 $pagesize" \ + "$SCRATCH_MNT/file" > /dev/null + md5sum "$SCRATCH_MNT/file" > "$tmp.$compression"This doesn't really check if everything we asked to write was actually written. pwrite(2), write(2), etc, return the number of bytes written, which can be less than what we asked for.
And using the checksum verification in that way, we are only checking that what we had before unmounting is the same after mounting again. I.e. we are not checking that what was actually written is what we have asked for.
Quoted 4 lines
We could do something like:
data=$(dd count=4096 bs=1 if=/dev/urandom)
echo -n "$data" > file
The reason I didn't want to use dd is it doesn't have good enough wrapper in fstests.
(Thus I guess that's also the reason why you use above command to workaround it)
If you're really concerned about the block size, it can be easily changed using "-b" option of pwrite, to archive the same behavior of the dd command.
Furthermore, since we're reading from urandom, isn't it already ensured we won't get blocked nor get short read until we're reading very large blocks?
Thus a very basic filter on the pwrite should be enough to make sure we really got page sized data written.
Thanks,
Qu
Quoted 45 lines
_scratch_cycle_mountcheck that the the md5sum of file is the same as: echo -n "$data" | md5sum
As it is, the test is enough to trigger the original bug, but having such additional checks is more valuable IMO for the long run, and can help prevent other types of regressions too.
Thanks Qu.
Quoted 31 lines
tests/btrfs/049 new file +16
-0+ + # When unpatched, compress-force=lzo would crash at data writeback + _scratch_cycle_mount + + # Make sure the content matches + md5sum -c "$tmp.$compression" | _filter_scratch + _scratch_unmount +} + +workload lzo +workload zstd +workload zlib + +# success, all done +status=0 +exittests/btrfs/049.out +6
-1@@ -1 +1,7 @@ QA output created by 049 +=== Testing compress-force=lzo === +SCRATCH_MNT/file: OK +=== Testing compress-force=zstd === +SCRATCH_MNT/file: OK +=== Testing compress-force=zlib === +SCRATCH_MNT/file: OK --2.34.0
Quoted 102 lines · Qu Wenruo
Quoted 88 lines · Filipe Manana
Quoted 55 lines · Qu Wenruo
Since kernel commit
d4088803f511("btrfs: subpage: makelzo_compress_pages()compatible"), lzo compression no longer respects the max compressed page limit, and can cause kernel crash.The upstream fix is
6f019c0e0193("btrfs: fix a out-of-bound access incopy_compressed_data_to_page()").This patch will add such regression test for all possible compress-force mount options, including lzo, zstd and zlib.
And since we're here, also make sure the content of the file matches after a mount cycle.
Signed-off-by Qu Wenruo <[email protected]>---
Changelog:
v2:
- Also test zlib and zstd
- Add file content verification check--- tests/btrfs/049 | 56 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/049.out | 6 +++++ 2 files changed, 62 insertions(+)create mode 100755 tests/btrfs/049
tests/btrfs/049 new file +23
-0@@ -0,0 +1,56 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 049 +# +# Test if btrfs will crash when using compress-force mount option against +# incompressible data +# +. ./common/preamble +_begin_fstest auto quick compress dangerous + +# Override the default cleanup function. +_cleanup() +{ + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/filter + +# real QA test starts heretests/btrfs/049 line 33
Quoted 10 lines
tests/btrfs/049 new file +10
-0+ +# Modify as appropriate. +_supported_fs btrfs +_require_scratch + +pagesize=$(get_page_size) +workload() +{ + local compression + compression=$1Could be shorter by doing it in one step:
local compression=$1
tests/btrfs/049 line 40
Quoted 7 lines
tests/btrfs/049 new file +7
-0+ + echo "=== Testing compress-force=$compression ===" + _scratch_mkfs -s "$pagesize">> $seqres.full + _scratch_mount -o compress-force="$compression" + $XFS_IO_PROG -f -c "pwrite -i /dev/urandom 0 $pagesize" \ + "$SCRATCH_MNT/file" > /dev/null + md5sum "$SCRATCH_MNT/file" > "$tmp.$compression"This doesn't really check if everything we asked to write was actually written. pwrite(2), write(2), etc, return the number of bytes written, which can be less than what we asked for.
And using the checksum verification in that way, we are only checking that what we had before unmounting is the same after mounting again. I.e. we are not checking that what was actually written is what we have asked for.
Quoted 4 lines
We could do something like:
data=$(dd count=4096 bs=1 if=/dev/urandom)
echo -n "$data" > fileThe reason I didn't want to use dd is it doesn't have good enough wrapper in fstests.
(Thus I guess that's also the reason why you use above command to workaround it)
Quoted 7 lines
If you're really concerned about the block size, it can be easily changed using "-b" option of pwrite, to archive the same behavior of the dd command.
Furthermore, since we're reading from urandom, isn't it already ensured we won't get blocked nor get short read until we're reading very large blocks?
I gave dd as an example, but I don't care about dd at all, it can be xfs_io or anything else.
My whole point was about verifying that what's written to the file is what we intended to write.
Verifying the checksum is fine when we know exactly what we asked to write, when the test hard codes what we want to write.
In this case we're asking to write random content, so doing an md5sum of the file after writing and
then comparing it to what we get after we unmount and mount again, is not a safe way to test we have the
expected content.
Quoted 3 lines
Thus a very basic filter on the pwrite should be enough to make sure we really got page sized data written.
It's not just about checking if the size of what was written matches what we asked to write.
It's all about verifying the written content matches what we asked to write in the first place (which implicitly ends up verifying the size as well when using a checksum).
Quoted 49 lines
Thanks,
QuQuoted 45 lines
_scratch_cycle_mountcheck that the the md5sum of file is the same as: echo -n "$data" | md5sum
As it is, the test is enough to trigger the original bug, but having such additional checks is more valuable IMO for the long run, and can help prevent other types of regressions too.
Thanks Qu.
Quoted 31 lines
tests/btrfs/049 new file +16
-0+ + # When unpatched, compress-force=lzo would crash at data writeback + _scratch_cycle_mount + + # Make sure the content matches + md5sum -c "$tmp.$compression" | _filter_scratch + _scratch_unmount +} + +workload lzo +workload zstd +workload zlib + +# success, all done +status=0 +exittests/btrfs/049.out +6
-1@@ -1 +1,7 @@ QA output created by 049 +=== Testing compress-force=lzo === +SCRATCH_MNT/file: OK +=== Testing compress-force=zstd === +SCRATCH_MNT/file: OK +=== Testing compress-force=zlib === +SCRATCH_MNT/file: OK --2.34.0
Signature · 3 lines
Filipe David Manana, “Whether you think you can, or you think you can't — you're right.”
Quoted 127 lines · Filipe Manana
Quoted 102 lines · Qu Wenruo
Quoted 88 lines · Filipe Manana
Quoted 55 lines · Qu Wenruo
Since kernel commit
d4088803f511("btrfs: subpage: makelzo_compress_pages()compatible"), lzo compression no longer respects the max compressed page limit, and can cause kernel crash.The upstream fix is
6f019c0e0193("btrfs: fix a out-of-bound access incopy_compressed_data_to_page()").This patch will add such regression test for all possible compress-force mount options, including lzo, zstd and zlib.
And since we're here, also make sure the content of the file matches after a mount cycle.
Signed-off-by Qu Wenruo <[email protected]>---
Changelog:
v2:
- Also test zlib and zstd
- Add file content verification check--- tests/btrfs/049 | 56 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/049.out | 6 +++++ 2 files changed, 62 insertions(+)create mode 100755 tests/btrfs/049
tests/btrfs/049 new file +23
-0@@ -0,0 +1,56 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 049 +# +# Test if btrfs will crash when using compress-force mount option against +# incompressible data +# +. ./common/preamble +_begin_fstest auto quick compress dangerous + +# Override the default cleanup function. +_cleanup() +{ + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/filter + +# real QA test starts heretests/btrfs/049 line 33
Quoted 10 lines
tests/btrfs/049 new file +10
-0+ +# Modify as appropriate. +_supported_fs btrfs +_require_scratch + +pagesize=$(get_page_size) +workload() +{ + local compression + compression=$1Could be shorter by doing it in one step:
local compression=$1
tests/btrfs/049 line 40
Quoted 7 lines
tests/btrfs/049 new file +7
-0+ + echo "=== Testing compress-force=$compression ===" + _scratch_mkfs -s "$pagesize">> $seqres.full + _scratch_mount -o compress-force="$compression" + $XFS_IO_PROG -f -c "pwrite -i /dev/urandom 0 $pagesize" \ + "$SCRATCH_MNT/file" > /dev/null + md5sum "$SCRATCH_MNT/file" > "$tmp.$compression"This doesn't really check if everything we asked to write was actually written. pwrite(2), write(2), etc, return the number of bytes written, which can be less than what we asked for.
And using the checksum verification in that way, we are only checking that what we had before unmounting is the same after mounting again. I.e. we are not checking that what was actually written is what we have asked for.
Quoted 4 lines
We could do something like:
data=$(dd count=4096 bs=1 if=/dev/urandom)
echo -n "$data" > fileThe reason I didn't want to use dd is it doesn't have good enough wrapper in fstests.
(Thus I guess that's also the reason why you use above command to workaround it)Quoted 7 lines
If you're really concerned about the block size, it can be easily changed using "-b" option of pwrite, to archive the same behavior of the dd command.
Furthermore, since we're reading from urandom, isn't it already ensured we won't get blocked nor get short read until we're reading very large blocks?
I gave dd as an example, but I don't care about dd at all, it can be
xfs_ioor anything else.My whole point was about verifying that what's written to the file is what we intended to write.
Verifying the checksum is fine when we know exactly what we asked to write, when the test hard codes what we want to write.
In this case we're asking to write random content, so doing an md5sum of the file after writing and
then comparing it to what we get after we unmount and mount again, is not a safe way to test we have the
expected content.Quoted 1 line
Quoted 8 lines
Quoted 2 lines
Thus a very basic filter on the pwrite should be enough to make sure we really got page sized data written.
It's not just about checking if the size of what was written matches what we asked to write.
It's all about verifying the written content matches what we asked to write in the first place (which implicitly ends up verifying the size as well when using a checksum).
OK, then what we should do is first read 4K from urandom into some known good place (thus I guess that's why you only use dd to read into stdout), then do the csum, and compare it after the mount cycle?
Thanks,
Qu
Quoted 53 lines
Quoted 50 lines
Thanks,
QuQuoted 45 lines
_scratch_cycle_mountcheck that the the md5sum of file is the same as: echo -n "$data" | md5sum
As it is, the test is enough to trigger the original bug, but having such additional checks is more valuable IMO for the long run, and can help prevent other types of regressions too.
Thanks Qu.
Quoted 31 lines
tests/btrfs/049 new file +16
-0+ + # When unpatched, compress-force=lzo would crash at data writeback + _scratch_cycle_mount + + # Make sure the content matches + md5sum -c "$tmp.$compression" | _filter_scratch + _scratch_unmount +} + +workload lzo +workload zstd +workload zlib + +# success, all done +status=0 +exittests/btrfs/049.out +6
-1@@ -1 +1,7 @@ QA output created by 049 +=== Testing compress-force=lzo === +SCRATCH_MNT/file: OK +=== Testing compress-force=zstd === +SCRATCH_MNT/file: OK +=== Testing compress-force=zlib === +SCRATCH_MNT/file: OK --2.34.0
Quoted 140 lines · Qu Wenruo
Quoted 127 lines · Filipe Manana
Quoted 102 lines · Qu Wenruo
Quoted 88 lines · Filipe Manana
Quoted 55 lines · Qu Wenruo
Since kernel commit
d4088803f511("btrfs: subpage: makelzo_compress_pages()compatible"), lzo compression no longer respects the max compressed page limit, and can cause kernel crash.The upstream fix is
6f019c0e0193("btrfs: fix a out-of-bound access incopy_compressed_data_to_page()").This patch will add such regression test for all possible compress-force mount options, including lzo, zstd and zlib.
And since we're here, also make sure the content of the file matches after a mount cycle.
Signed-off-by Qu Wenruo <[email protected]>---
Changelog:
v2:
- Also test zlib and zstd
- Add file content verification check--- tests/btrfs/049 | 56 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/049.out | 6 +++++ 2 files changed, 62 insertions(+)create mode 100755 tests/btrfs/049
tests/btrfs/049 new file +23
-0@@ -0,0 +1,56 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 049 +# +# Test if btrfs will crash when using compress-force mount option against +# incompressible data +# +. ./common/preamble +_begin_fstest auto quick compress dangerous + +# Override the default cleanup function. +_cleanup() +{ + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/filter + +# real QA test starts heretests/btrfs/049 line 33
Quoted 10 lines
tests/btrfs/049 new file +10
-0+ +# Modify as appropriate. +_supported_fs btrfs +_require_scratch + +pagesize=$(get_page_size) +workload() +{ + local compression + compression=$1Could be shorter by doing it in one step:
local compression=$1
tests/btrfs/049 line 40
Quoted 7 lines
tests/btrfs/049 new file +7
-0+ + echo "=== Testing compress-force=$compression ===" + _scratch_mkfs -s "$pagesize">> $seqres.full + _scratch_mount -o compress-force="$compression" + $XFS_IO_PROG -f -c "pwrite -i /dev/urandom 0 $pagesize" \ + "$SCRATCH_MNT/file" > /dev/null + md5sum "$SCRATCH_MNT/file" > "$tmp.$compression"This doesn't really check if everything we asked to write was actually written. pwrite(2), write(2), etc, return the number of bytes written, which can be less than what we asked for.
And using the checksum verification in that way, we are only checking that what we had before unmounting is the same after mounting again. I.e. we are not checking that what was actually written is what we have asked for.
Quoted 4 lines
We could do something like:
data=$(dd count=4096 bs=1 if=/dev/urandom)
echo -n "$data" > fileThe reason I didn't want to use dd is it doesn't have good enough wrapper in fstests.
(Thus I guess that's also the reason why you use above command to workaround it)Quoted 7 lines
If you're really concerned about the block size, it can be easily changed using "-b" option of pwrite, to archive the same behavior of the dd command.
Furthermore, since we're reading from urandom, isn't it already ensured we won't get blocked nor get short read until we're reading very large blocks?
I gave dd as an example, but I don't care about dd at all, it can be
xfs_ioor anything else.My whole point was about verifying that what's written to the file is what we intended to write.
Verifying the checksum is fine when we know exactly what we asked to write, when the test hard codes what we want to write.
In this case we're asking to write random content, so doing an md5sum of the file after writing and
then comparing it to what we get after we unmount and mount again, is not a safe way to test we have the
expected content.Quoted 1 line
Quoted 8 lines
Quoted 2 lines
Thus a very basic filter on the pwrite should be enough to make sure we really got page sized data written.
It's not just about checking if the size of what was written matches what we asked to write.
It's all about verifying the written content matches what we asked to write in the first place (which implicitly ends up verifying the size as well when using a checksum).
Quoted 3 lines
OK, then what we should do is first read 4K from urandom into some known good place (thus I guess that's why you only use dd to read into stdout), then do the csum, and compare it after the mount cycle?
Yep, that's it. Maybe store the data in /tmp/ and then compare.
I now realize that the example was bad, because storing binary data into shell variables is not safe.
Thanks.
Quoted 57 lines
Thanks,
QuQuoted 53 lines
Quoted 50 lines
Thanks,
QuQuoted 45 lines
_scratch_cycle_mountcheck that the the md5sum of file is the same as: echo -n "$data" | md5sum
As it is, the test is enough to trigger the original bug, but having such additional checks is more valuable IMO for the long run, and can help prevent other types of regressions too.
Thanks Qu.
Quoted 31 lines
tests/btrfs/049 new file +16
-0+ + # When unpatched, compress-force=lzo would crash at data writeback + _scratch_cycle_mount + + # Make sure the content matches + md5sum -c "$tmp.$compression" | _filter_scratch + _scratch_unmount +} + +workload lzo +workload zstd +workload zlib + +# success, all done +status=0 +exittests/btrfs/049.out +6
-1@@ -1 +1,7 @@ QA output created by 049 +=== Testing compress-force=lzo === +SCRATCH_MNT/file: OK +=== Testing compress-force=zstd === +SCRATCH_MNT/file: OK +=== Testing compress-force=zlib === +SCRATCH_MNT/file: OK --2.34.0
Signature · 3 lines
Filipe David Manana, “Whether you think you can, or you think you can't — you're right.”