futex.2, mount_setattr.2, proc.5, netlink.7, tcp.7: tfix
PATCH 1/1 futex.2, mount_setattr.2, proc.5, netlink.7, tcp.7: tfix
Typos found with codespell.
--- man2/futex.2 | 2 +- man2/mount_setattr.2 | 2 +- man5/proc.5 | 4 ++-- man7/netlink.7 | 2 +- man7/tcp.7 | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)
man2/futex.2 +1 -1
@@ -1137,7 +1137,7 @@ except that the clock against which is measured is selectable. By default, the (absolute) timeout specified in .I timeout -is measured againt the +is measured against the .B CLOCK_MONOTONIC clock, but if the .B FUTEX_CLOCK_REALTIME
man2/mount_setattr.2 +1 -1
@@ -986,7 +986,7 @@ main(int argc, char *argv[]) .\" because. Because making assumptions about the current working directory .\" of the calling process is just too easy to get wrong; especially when .\" pivot_root() or chroot() are in play. -.\" My absolut preference (joke intended) is to open a well-known starting +.\" My absolute preference (joke intended) is to open a well-known starting .\" point with an absolute path to get a dirfd and then scope all future .\" operations beneath that dirfd. This already works with old-style .\" openat() and _very_ cautious programming but openat2() and its
man5/proc.5 +2 -2
@@ -3068,7 +3068,7 @@ Further information about the zones can be found in .IR /proc/zoneinfo . .TP .I /proc/bus -Contains subdirectories for installed busses. +Contains subdirectories for installed buses. .TP .I /proc/bus/pccard Subdirectory for PCMCIA devices when
@@ -3079,7 +3079,7 @@ is set at kernel compilation time. .TP .I /proc/bus/pci Contains various bus subdirectories and pseudo-files containing -information about PCI busses, installed devices, and device +information about PCI buses, installed devices, and device drivers. Some of these files are not ASCII. .TP
man7/netlink.7 +1 -1
@@ -191,7 +191,7 @@ structure, .B NLMSG_DONE message terminates a multipart message. Error messages get the -original request appened, unless the user requests to cap the +original request appended, unless the user requests to cap the error message, and get extra error data if requested. .PP .in +4n
man7/tcp.7 +1 -1
@@ -1161,7 +1161,7 @@ This option takes an as an argument. When the value is greater than 0, it specifies the maximum amount of time in milliseconds that transmitted -data may remain unacknowledged, or bufferred data may remain untransmitted +data may remain unacknowledged, or buffered data may remain untransmitted (due to zero window size) before TCP will forcibly close the corresponding connection and return .B ETIMEDOUT
Signature · 1 line
2.33.1
Hi Samanta,
Quoted 1 line · Samanta Navarro
Typos found with codespell.
[...]
man2/mount_setattr.2 main(int argc, char *argv[]) · line 992
Quoted 13 lines
man2/mount_setattr.2 +1
-1@@ -986,7 +986,7 @@ main(int argc, char *argv[]) .\" because. Because making assumptions about the current working directory .\" of the calling process is just too easy to get wrong; especially when .\" pivot_root() or chroot() are in play. -.\" My absolut preference (joke intended) is to open a well-known starting +.\" My absolute preference (joke intended) is to open a well-known starting .\" point with an absolute path to get a dirfd and then scope all future .\" operations beneath that dirfd. This already works with old-style .\" openat() and _very_ cautious programming but openat2() and its
I always thought the foregoing was a double entendre expressing the author's taste for vodka...
Regards,
Branden
Hi Branden and Samanta,
Quoted 5 lines · G. Branden Robinson
Hi Samanta,
Quoted 1 line · Samanta Navarro
Typos found with codespell.
[...]
Quoted 16 lines
man2/mount_setattr.2 main(int argc, char *argv[]) · line 992
Quoted 13 lines
man2/mount_setattr.2 +1
-1@@ -986,7 +986,7 @@ main(int argc, char *argv[]) .\" because. Because making assumptions about the current working directory .\" of the calling process is just too easy to get wrong; especially when .\" pivot_root() or chroot() are in play. -.\" My absolut preference (joke intended) is to open a well-known starting +.\" My absolute preference (joke intended) is to open a well-known starting .\" point with an absolute path to get a dirfd and then scope all future .\" operations beneath that dirfd. This already works with old-style .\" openat() and _very_ cautious programming but openat2() and itsI always thought the foregoing was a double entendre expressing the author's taste for vodka...
Yes. There have been other attempts to patch this[1], but I'll defend the author's joke, even if I don't share his preferences for liquid ingestion. :)
[1]: https://lore.kernel.org/linux-man/[email protected]/
Cheers,
Alex
Signature · 3 lines
Alejandro Colomar Linux man-pages comaintainer; http://www.kernel.org/doc/man-pages/ http://www.alejandro-colomar.es/
Hi Samanta,
Quoted 27 lines · Alejandro Colomar (man-pages)
Hi Branden and Samanta,
Quoted 15 lines · G. Branden Robinson
Hi Samanta,
Quoted 1 line · Samanta Navarro
Typos found with codespell.
[...]
Quoted 10 lines
man2/mount_setattr.2 +0
-0@@ -986,7 +986,7 @@ main(int argc, char *argv[]).\" because. Because making assumptions about the current working directory .\" of the calling process is just too easy to get wrong; especially when .\"
pivot_root()orchroot()are in play.
-.\" My absolut preference (joke intended) is to open a well-known startingQuoted 8 lines
Quoted 5 lines
+.\" My absolute preference (joke intended) is to open a well-known starting
.\" point with an absolute path to get a dirfd and then scope all future .\" operations beneath that dirfd. This already works with old-style .\"openat()and _very_ cautious programming butopenat2()and itsI always thought the foregoing was a double entendre expressing the author's taste for vodka...
Quoted 3 lines
Yes. There have been other attempts to patch this[1], but I'll defend the author's joke, even if I don't share his preferences for liquid ingestion. :)
However, I like the rest of the patch. I you don't mind, could you please resend it without fixing the joke?
Thanks,
Alex
Signature · 3 lines
Alejandro Colomar Linux man-pages comaintainer; http://www.kernel.org/doc/man-pages/ http://www.alejandro-colomar.es/
Typos found with codespell.
--- man2/futex.2 | 2 +- man2/mount_setattr.2 | 2 +- man5/proc.5 | 4 ++-- man7/netlink.7 | 2 +- man7/tcp.7 | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)
man2/futex.2 +1 -1
@@ -1137,7 +1137,7 @@ except that the clock against which is measured is selectable. By default, the (absolute) timeout specified in .I timeout -is measured againt the +is measured against the .B CLOCK_MONOTONIC clock, but if the .B FUTEX_CLOCK_REALTIME
man5/proc.5 +2 -2
@@ -3068,7 +3068,7 @@ Further information about the zones can be found in .IR /proc/zoneinfo . .TP .I /proc/bus -Contains subdirectories for installed busses. +Contains subdirectories for installed buses. .TP .I /proc/bus/pccard Subdirectory for PCMCIA devices when
@@ -3079,7 +3079,7 @@ is set at kernel compilation time. .TP .I /proc/bus/pci Contains various bus subdirectories and pseudo-files containing -information about PCI busses, installed devices, and device +information about PCI buses, installed devices, and device drivers. Some of these files are not ASCII. .TP
man7/netlink.7 +1 -1
@@ -191,7 +191,7 @@ structure, .B NLMSG_DONE message terminates a multipart message. Error messages get the -original request appened, unless the user requests to cap the +original request appended, unless the user requests to cap the error message, and get extra error data if requested. .PP .in +4n
man7/tcp.7 +1 -1
@@ -1161,7 +1161,7 @@ This option takes an as an argument. When the value is greater than 0, it specifies the maximum amount of time in milliseconds that transmitted -data may remain unacknowledged, or bufferred data may remain untransmitted +data may remain unacknowledged, or buffered data may remain untransmitted (due to zero window size) before TCP will forcibly close the corresponding connection and return .B ETIMEDOUT
Signature · 1 line
2.34.0
Hi Samanta,
Quoted 4 lines · Samanta Navarro
Typos found with codespell.
Signed-off-by Samanta Navarro <[email protected]>
Patch applied.
I had to manually remove the changes to futex.2, since that typo had already been fixed a couple of months ago in my tree, so I also renamed the subject.
Thanks,
Alex
Quoted 70 lines
--- man2/futex.2 | 2 +- man2/mount_setattr.2 | 2 +- man5/proc.5 | 4 ++-- man7/netlink.7 | 2 +- man7/tcp.7 | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)man2/futex.2 +1
-1@@ -1137,7 +1137,7 @@ except that the clock against which is measured is selectable. By default, the (absolute) timeout specified in .I timeout -is measured againt the +is measured against the .B CLOCK_MONOTONIC clock, but if the .B FUTEX_CLOCK_REALTIMEman5/proc.5 +2
-2@@ -3068,7 +3068,7 @@ Further information about the zones can be found in .IR /proc/zoneinfo . .TP .I /proc/bus -Contains subdirectories for installed busses. +Contains subdirectories for installed buses. .TP .I /proc/bus/pccard Subdirectory for PCMCIA devices when@@ -3079,7 +3079,7 @@ is set at kernel compilation time. .TP .I /proc/bus/pci Contains various bus subdirectories and pseudo-files containing -information about PCI busses, installed devices, and device +information about PCI buses, installed devices, and device drivers. Some of these files are not ASCII. .TPman7/netlink.7 +1
-1@@ -191,7 +191,7 @@ structure, .B NLMSG_DONE message terminates a multipart message. Error messages get the -original request appened, unless the user requests to cap the +original request appended, unless the user requests to cap the error message, and get extra error data if requested. .PP .in +4nman7/tcp.7 +1
-1@@ -1161,7 +1161,7 @@ This option takes an as an argument. When the value is greater than 0, it specifies the maximum amount of time in milliseconds that transmitted -data may remain unacknowledged, or bufferred data may remain untransmitted +data may remain unacknowledged, or buffered data may remain untransmitted (due to zero window size) before TCP will forcibly close the corresponding connection and return .B ETIMEDOUT
Signature · 2 lines
Alejandro Colomar Linux man-pages comaintainer; http://www.kernel.org/doc/man-pages/