octeontx2-pf: Ntuple filters support for VF netdev
Hello Rakesh Babu,
The patch 3cffaed2136c: "octeontx2-pf: Ntuple filters support for VF netdev" from Aug 17, 2021, leads to the following Smatch static checker warning:
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c:1247 rvu_mbox_handler_npc_install_flow()
error: uninitialized symbol 'nixlf'.
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c:392 npc_get_default_entry_action()
error: uninitialized symbol 'nixlf'.
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
1154 int rvu_mbox_handler_npc_install_flow(struct rvu *rvu,
1155 struct npc_install_flow_req *req,
1156 struct npc_install_flow_rsp *rsp)
1157 {
1158 bool from_vf = !!(req->hdr.pcifunc & RVU_PFVF_FUNC_MASK);
1159 struct rvu_switch *rswitch = &rvu->rswitch;
1160 int blkaddr, nixlf, err;
^^^^^
1161 struct rvu_pfvf *pfvf;
1162 bool pf_set_vfs_mac = false;
1163 bool enable = true;
1164 u16 target;
1165
1166 blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
1167 if (blkaddr < 0) {
1168 dev_err(rvu->dev, "%s: NPC block not implemented\n", __func__);
1169 return NPC_MCAM_INVALID_REQ;
1170 }
1171
1172 if (!is_npc_interface_valid(rvu, req->intf))
1173 return NPC_FLOW_INTF_INVALID;
1174
1175 if (from_vf && req->default_rule)
1176 return NPC_FLOW_VF_PERM_DENIED;
1177
1178 /* Each PF/VF info is maintained in struct rvu_pfvf.
1179 * rvu_pfvf for the target PF/VF needs to be retrieved
1180 * hence modify pcifunc accordingly.
1181 */
1182
1183 /* AF installing for a PF/VF */
1184 if (!req->hdr.pcifunc)
1185 target = req->vf;
1186 /* PF installing for its VF */
1187 else if (!from_vf && req->vf) {
1188 target = (req->hdr.pcifunc & ~RVU_PFVF_FUNC_MASK) | req->vf;
1189 pf_set_vfs_mac = req->default_rule &&
1190 (req->features & BIT_ULL(NPC_DMAC));
1191 }
1192 /* msg received from PF/VF */
1193 else
1194 target = req->hdr.pcifunc;
1195
1196 /* ignore chan_mask in case pf func is not AF, revisit later */
1197 if (!is_pffunc_af(req->hdr.pcifunc))
1198 req->chan_mask = 0xFFF;
1199
1200 err = npc_check_unsupported_flows(rvu, req->features, req->intf);
1201 if (err)
1202 return NPC_FLOW_NOT_SUPPORTED;
1203
1204 pfvf = rvu_get_pfvf(rvu, target);
1205
1206 /* PF installing for its VF */
1207 if (req->hdr.pcifunc && !from_vf && req->vf)
1208 set_bit(PF_SET_VF_CFG, &pfvf->flags);
1209
1210 /* update req destination mac addr */
1211 if ((req->features & BIT_ULL(NPC_DMAC)) && is_npc_intf_rx(req->intf) &&
1212 is_zero_ether_addr(req->packet.dmac)) {
1213 ether_addr_copy(req->packet.dmac, pfvf->mac_addr);
1214 eth_broadcast_addr((u8 *)&req->mask.dmac);
1215 }
1216
1217 /* Proceed if NIXLF is attached or not for TX rules */
1218 err = nix_get_nixlf(rvu, target, &nixlf, NULL);
1219 if (err && is_npc_intf_rx(req->intf) && !pf_set_vfs_mac)
1220 return NPC_FLOW_NO_NIXLF;If nix_get_nixlf() fails then "nixlf" is not necessarily initialized and then if is_npc_intf_rx() is true or pf_set_vfs_mac is false then this will not return.
1221
1222 /* don't enable rule when nixlf not attached or initialized */
1223 if (!(is_nixlf_attached(rvu, target) &&
1224 test_bit(NIXLF_INITIALIZED, &pfvf->flags)))
1225 enable = false;
1226
1227 /* Packets reaching NPC in Tx path implies that a
1228 * NIXLF is properly setup and transmitting.
1229 * Hence rules can be enabled for Tx.
1230 */
1231 if (is_npc_intf_tx(req->intf))
1232 enable = true;
1233
1234 /* Do not allow requests from uninitialized VFs */
1235 if (from_vf && !enable)
1236 return NPC_FLOW_VF_NOT_INIT;
1237
1238 /* PF sets VF mac & VF NIXLF is not attached, update the mac addr */
1239 if (pf_set_vfs_mac && !enable) {
1240 ether_addr_copy(pfvf->default_mac, req->packet.dmac);
1241 ether_addr_copy(pfvf->mac_addr, req->packet.dmac);
1242 set_bit(PF_SET_VF_MAC, &pfvf->flags);
1243 return 0;
1244 }
1245
1246 mutex_lock(&rswitch->switch_lock);
--> 1247 err = npc_install_flow(rvu, blkaddr, target, nixlf, pfvf,
^^^^^Potentially passing an uninitialized value.
1248 req, rsp, enable, pf_set_vfs_mac);
1249 mutex_unlock(&rswitch->switch_lock);
1250
1251 return err;
1252 }regards,
dan carpenter