Skip to contentSkip to conversation

Small device property fixes and improvements

PATCH In review Sakari Ailus 2 participants 9 messages Dec 1, 2021 – Dec 17, 2021

Subsystems (7)
lore
Share & tools
lore

Sakari Ailus

author reviewer
#0 lore raw

v2 cover Small device property fixes and improvements

Hello everyone,

Here's a few small fixes and improvements for device properties.

since v1:

- Use labelled references.

- Avoid using continue in fwnode_graph_get_endpoint_count().

- Rewrap lines in data node reference example.

Sakari Ailus (7):
device property: Fix fwnode_graph_devcon_match() fwnode leak device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
Documentation: ACPI: Fix data node reference documentation
Documentation: ACPI: Update references
device property: Implement fwnode_graph_get_endpoint_count() device property: Use fwnode_graph_for_each_endpoint() macro device property: Drop fwnode_graph_get_remote_node()

 .../acpi/dsd/data-node-references.rst         | 28 +++---
 .../firmware-guide/acpi/dsd/graph.rst         | 40 ++++-----
 .../firmware-guide/acpi/dsd/leds.rst          | 40 ++++-----
 Documentation/firmware-guide/acpi/dsd/phy.rst | 28 +++---
 drivers/base/property.c                       | 89 +++++++++----------
 drivers/staging/media/tegra-video/vi.c        | 12 ++-
 include/linux/property.h                      |  8 +-
 7 files changed, 119 insertions(+), 126 deletions(-)
Signature · 1 line
2.30.2
author reviewer
#1 lore raw

PATCH v2 1/7 device property: Fix fwnode_graph_devcon_match() fwnode leak

For each endpoint it encounters, fwnode_graph_devcon_match() checks whether the endpoint's remote port parent device is available. If it is not, it ignores the endpoint but does not put the reference to the remote endpoint port parent fwnode. For available devices the fwnode handle reference is put as expected.

Put the reference for unavailable devices now.

Fixes 637e9e52b185 ("device connection: Find device connections also from device graphs")
Cc [email protected] # for 5.1 and later
---
 drivers/base/property.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/base/property.c +3 -1
index f1f35b48ab8b9..6df99e526ab0f 100644
@@ -1206,8 +1206,10 @@ fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
 
 	fwnode_graph_for_each_endpoint(fwnode, ep) {
 		node = fwnode_graph_get_remote_port_parent(ep);
-		if (!fwnode_device_is_available(node))
+		if (!fwnode_device_is_available(node)) {
+			fwnode_handle_put(node);
 			continue;
+		}
 
 		ret = match(node, con_id, data);
 		fwnode_handle_put(node);
Signature · 1 line
2.30.2
author reviewer
#2 lore raw

PATCH v2 2/7 device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED

In reply to Sakari Ailus

FWNODE_GRAPH_DEVICE_DISABLED flag was meant for also returning endpoints connected to disabled devices, but it also may return endpoints that are not connected. Fix this in documentation. Also fwnode_graph_get_endpoint_by_id() was affeced by this.

Also improve the language a little bit.

Fixes 0fcc2bdc8aff ("device property: Add fwnode_graph_get_endpoint_by_id()")
---
 drivers/base/property.c  | 4 ++--
 include/linux/property.h | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)
drivers/base/property.c +2 -2
index 6df99e526ab0f..ecc4e2eb10678 100644
@@ -1111,8 +1111,8 @@ EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_node);
  * has not been found, look for the closest endpoint ID greater than the
  * specified one and return the endpoint that corresponds to it, if present.
  *
- * Do not return endpoints that belong to disabled devices, unless
- * FWNODE_GRAPH_DEVICE_DISABLED is passed in @flags.
+ * Does not return endpoints that belong to disabled devices or endpoints that
+ * are unconnected, unless FWNODE_GRAPH_DEVICE_DISABLED is passed in @flags.
  *
  * The returned endpoint needs to be released by calling fwnode_handle_put() on
  * it when it is not needed any more.
include/linux/property.h +2 -1
index 88fa726a76df7..af5a7e512c86f 100644
@@ -418,7 +418,8 @@ static inline bool fwnode_graph_is_endpoint(struct fwnode_handle *fwnode)
  *				one.
  * @FWNODE_GRAPH_DEVICE_DISABLED: That the device to which the remote
  *				  endpoint of the given endpoint belongs to,
- *				  may be disabled.
+ *				  may be disabled, or that the endpoint is not
+ *				  connected.
  */
 #define FWNODE_GRAPH_ENDPOINT_NEXT	BIT(0)
 #define FWNODE_GRAPH_DEVICE_DISABLED	BIT(1)
Signature · 1 line
2.30.2
author reviewer
#3 lore raw

PATCH v2 3/7 Documentation: ACPI: Fix data node reference documentation

In reply to Sakari Ailus

The data node reference documentation was missing a package that must contain the property values, instead property name and multiple values being present in a single package. This is not aligned with the _DSD spec. Fix it by adding the package for the values.

Also add the missing "reg" properties to two numbered nodes.

Fixes b10134a3643d ("ACPI: property: Document hierarchical data extension references")
---
 .../firmware-guide/acpi/dsd/data-node-references.rst   | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
Documentation/firmware-guide/acpi/dsd/data-node-references.rst +8 -2
index b7ad47df49de0..8b65b32e6e40e 100644
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <[email protected]>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
Signature · 1 line
2.30.2
author reviewer
#4 lore raw

PATCH v2 4/7 Documentation: ACPI: Update references

In reply to Sakari Ailus

Update references for the ACPI _DSD documentation. In particular:

- Substitute _DSD property and hierarchical data extension documents with the newer DSD guide that replaces both, and use its HTML form.

- Refer to the latest ACPI spec.

- Add data node reference documentation reference to graph documentation.

---
 .../acpi/dsd/data-node-references.rst         | 18 ++++-----
 .../firmware-guide/acpi/dsd/graph.rst         | 40 +++++++++----------
 .../firmware-guide/acpi/dsd/leds.rst          | 40 +++++++++----------
 Documentation/firmware-guide/acpi/dsd/phy.rst | 28 +++++++------
 4 files changed, 58 insertions(+), 68 deletions(-)
Documentation/firmware-guide/acpi/dsd/data-node-references.rst +7 -11
index 8b65b32e6e40e..8d8b53e96bcfe 100644
@@ -13,9 +13,9 @@ Hierarchical data extension nodes may not be referred to directly, hence this
 document defines a scheme to implement such references.
 
 A reference consist of the device object name followed by one or more
-hierarchical data extension [1] keys. Specifically, the hierarchical data
-extension node which is referred to by the key shall lie directly under the
-parent object i.e. either the device object or another hierarchical data
+hierarchical data extension [dsd-guide] keys. Specifically, the hierarchical
+data extension node which is referred to by the key shall lie directly under
+the parent object i.e. either the device object or another hierarchical data
 extension node.
 
 The keys in the hierarchical data nodes shall consist of the name of the node,
@@ -33,7 +33,7 @@ extension key.
 Example
 =======
 
-In the ASL snippet below, the "reference" _DSD property [2] contains a
+In the ASL snippet below, the "reference" _DSD property contains a
 device object reference to DEV0 and under that device object, a
 hierarchical data extension key "node@1" referring to the NOD1 object
 and lastly, a hierarchical data extension key "anothernode" referring to
@@ -91,10 +91,6 @@ Documentation/firmware-guide/acpi/dsd/graph.rst.
 References
 ==========
 
-[1] Hierarchical Data Extension UUID For _DSD.
-<https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
-referenced 2018-07-17.
-
-[2] Device Properties UUID For _DSD.
-<https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>,
-referenced 2016-10-04.
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.
Documentation/firmware-guide/acpi/dsd/graph.rst +18 -22
index 0ced07cb1be31..b9dbfc73ed25b 100644
@@ -7,11 +7,11 @@ Graphs
 _DSD
 ====
 
-_DSD (Device Specific Data) [7] is a predefined ACPI device
+_DSD (Device Specific Data) [dsd-guide] is a predefined ACPI device
 configuration object that can be used to convey information on
 hardware features which are not specifically covered by the ACPI
-specification [1][6]. There are two _DSD extensions that are relevant
-for graphs: property [4] and hierarchical data extensions [5]. The
+specification [acpi]. There are two _DSD extensions that are relevant
+for graphs: property [dsd-guide] and hierarchical data extensions. The
 property extension provides generic key-value pairs whereas the
 hierarchical data extension supports nodes with references to other
 nodes, forming a tree. The nodes in the tree may contain properties as
@@ -36,8 +36,9 @@ Ports and endpoints
 ===================
 
 The port and endpoint concepts are very similar to those in Devicetree
-[3]. A port represents an interface in a device, and an endpoint
-represents a connection to that interface.
+[devicetree, graph-bindings]. A port represents an interface in a device, and
+an endpoint represents a connection to that interface. Also see [data-node-ref]
+for generic data node references.
 
 All port nodes are located under the device's "_DSD" node in the hierarchical
 data extension tree. The data extension related to each port node must begin
@@ -153,25 +154,20 @@ the "ISP" device and vice versa.
 References
 ==========
 
-[1] _DSD (Device Specific Data) Implementation Guide.
-    https://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm,
-    referenced 2016-10-03.
+[acpi] Advanced Configuration and Power Interface Specification.
+    https://uefi.org/specifications/ACPI/6.4/, referenced 2021-11-30.
 
-[2] Devicetree. https://www.devicetree.org, referenced 2016-10-03.
+[data-node-ref] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
 
-[3] Documentation/devicetree/bindings/graph.txt
+[devicetree] Devicetree. https://www.devicetree.org, referenced 2016-10-03.
 
-[4] Device Properties UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
-    referenced 2016-10-04.
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.
 
-[5] Hierarchical Data Extension UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf,
-    referenced 2016-10-04.
-
-[6] Advanced Configuration and Power Interface Specification.
-    https://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf,
-    referenced 2016-10-04.
-
-[7] _DSD Device Properties Usage Rules.
+[dsd-rules] _DSD Device Properties Usage Rules.
     Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[graph-bindings] Common bindings for device graphs (Devicetree).
+    https://github.com/devicetree-org/dt-schema/blob/main/schemas/graph.yaml,
+    referenced 2021-11-30.
Documentation/firmware-guide/acpi/dsd/leds.rst +18 -22
index b99fff8e06f28..93db592c93c71 100644
@@ -5,19 +5,20 @@
 Describing and referring to LEDs in ACPI
 ========================================
 
-Individual LEDs are described by hierarchical data extension [6] nodes under the
+Individual LEDs are described by hierarchical data extension [5] nodes under the
 device node, the LED driver chip. The "reg" property in the LED specific nodes
 tells the numerical ID of each individual LED output to which the LEDs are
-connected. [3] The hierarchical data nodes are named "led@X", where X is the
+connected. [leds] The hierarchical data nodes are named "led@X", where X is the
 number of the LED output.
 
-Referring to LEDs in Device tree is documented in [4], in "flash-leds" property
-documentation. In short, LEDs are directly referred to by using phandles.
+Referring to LEDs in Device tree is documented in [video-interfaces], in
+"flash-leds" property documentation. In short, LEDs are directly referred to by
+using phandles.
 
-While Device tree allows referring to any node in the tree[1], in ACPI
-references are limited to device nodes only [2]. For this reason using the same
-mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes
-is documented in [7].
+While Device tree allows referring to any node in the tree [devicetree], in
+ACPI references are limited to device nodes only [acpi]. For this reason using
+the same mechanism on ACPI is not possible. A mechanism to refer to non-device
+ACPI nodes is documented in [data-node-ref].
 
 ACPI allows (as does DT) using integer arguments after the reference. A
 combination of the LED driver device reference and an integer argument,
@@ -90,22 +91,17 @@ where
 References
 ==========
 
-[1] Device tree. https://www.devicetree.org, referenced 2019-02-21.
+[acpi] Advanced Configuration and Power Interface Specification.
+    https://uefi.org/specifications/ACPI/6.4/, referenced 2021-11-30.
 
-[2] Advanced Configuration and Power Interface Specification.
-    https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf,
-    referenced 2019-02-21.
+[data-node-ref] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
 
-[3] Documentation/devicetree/bindings/leds/common.txt
+[devicetree] Devicetree. https://www.devicetree.org, referenced 2019-02-21.
 
-[4] Documentation/devicetree/bindings/media/video-interfaces.txt
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.
 
-[5] Device Properties UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
-    referenced 2019-02-21.
+[leds] Documentation/devicetree/bindings/leds/common.yaml
 
-[6] Hierarchical Data Extension UUID For _DSD.
-    https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf,
-    referenced 2019-02-21.
-
-[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+[video-interfaces] Documentation/devicetree/bindings/media/video-interfaces.yaml
Documentation/firmware-guide/acpi/dsd/phy.rst +15 -13
index 680ad179e5f9d..673ac374f92ac 100644
@@ -4,17 +4,17 @@
 MDIO bus and PHYs in ACPI
 =========================
 
-The PHYs on an MDIO bus [1] are probed and registered using
+The PHYs on an MDIO bus [phy] are probed and registered using
 fwnode_mdiobus_register_phy().
 
 Later, for connecting these PHYs to their respective MACs, the PHYs registered
 on the MDIO bus have to be referenced.
 
 This document introduces two _DSD properties that are to be used
-for connecting PHYs on the MDIO bus [3] to the MAC layer.
+for connecting PHYs on the MDIO bus [dsd-properties-rules] to the MAC layer.
 
 These properties are defined in accordance with the "Device
-Properties UUID For _DSD" [2] document and the
+Properties UUID For _DSD" [dsd-guide] document and the
 daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
 Data Descriptors containing them.
 
@@ -48,22 +48,22 @@ as device object references (e.g. \_SB.MDI0.PHY1).
 phy-mode
 --------
 The "phy-mode" _DSD property is used to describe the connection to
-the PHY. The valid values for "phy-mode" are defined in [4].
+the PHY. The valid values for "phy-mode" are defined in [ethernet-controller].
 
 managed
 -------
 Optional property, which specifies the PHY management type.
-The valid values for "managed" are defined in [4].
+The valid values for "managed" are defined in [ethernet-controller].
 
 fixed-link
 ----------
 The "fixed-link" is described by a data-only subnode of the
 MAC port, which is linked in the _DSD package via
 hierarchical data extension (UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b
-in accordance with [5] "_DSD Implementation Guide" document).
+in accordance with [dsd-guide] "_DSD Implementation Guide" document).
 The subnode should comprise a required property ("speed") and
 possibly the optional ones - complete list of parameters and
-their values are specified in [4].
+their values are specified in [ethernet-controller].
 
 The following ASL example illustrates the usage of these properties.
 
@@ -188,12 +188,14 @@ MAC node example with a "fixed-link" subnode.
 References
 ==========
 
-[1] Documentation/networking/phy.rst
+[phy] Documentation/networking/phy.rst
 
-[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+[dsd-properties-rules]
+    Documentation/firmware-guide/acpi/DSD-properties-rules.rst
 
-[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+[ethernet-controller]
+    Documentation/devicetree/bindings/net/ethernet-controller.yaml
 
-[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml
-
-[5] https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf
+[dsd-guide] DSD Guide.
+    https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.adoc, referenced
+    2021-11-30.
Signature · 1 line
2.30.2
author reviewer
#5 lore raw

PATCH v2 5/7 device property: Implement fwnode_graph_get_endpoint_count()

In reply to Sakari Ailus

Add fwnode_graph_get_endpoint_count() function to provide generic implementation of of_graph_get_endpoint_count(). The former by default only counts endpoints to available devices which is consistent with the rest of the fwnode graph API. By providing FWNODE_GRAPH_DEVICE_DISABLED flag, also unconnected endpoints and endpoints to disabled devices are counted.

---
 drivers/base/property.c  | 49 ++++++++++++++++++++++++++++++++--------
 include/linux/property.h |  2 ++
 2 files changed, 41 insertions(+), 10 deletions(-)
drivers/base/property.c +39 -10
index ecc4e2eb10678..90075c051dccf 100644
@@ -1097,6 +1097,18 @@ fwnode_graph_get_remote_node(const struct fwnode_handle *fwnode, u32 port_id,
 }
 EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_node);
 
+static bool fwnode_graph_remote_available(struct fwnode_handle *ep)
+{
+	struct fwnode_handle *dev_node;
+	bool available;
+
+	dev_node = fwnode_graph_get_remote_port_parent(ep);
+	available = fwnode_device_is_available(dev_node);
+	fwnode_handle_put(dev_node);
+
+	return available;
+}
+
 /**
  * fwnode_graph_get_endpoint_by_id - get endpoint by port and endpoint numbers
  * @fwnode: parent fwnode_handle containing the graph
@@ -1130,16 +1142,8 @@ fwnode_graph_get_endpoint_by_id(const struct fwnode_handle *fwnode,
 		struct fwnode_endpoint fwnode_ep = { 0 };
 		int ret;
 
-		if (enabled_only) {
-			struct fwnode_handle *dev_node;
-			bool available;
-
-			dev_node = fwnode_graph_get_remote_port_parent(ep);
-			available = fwnode_device_is_available(dev_node);
-			fwnode_handle_put(dev_node);
-			if (!available)
-				continue;
-		}
+		if (enabled_only && !fwnode_graph_remote_available(ep))
+			continue;
 
 		ret = fwnode_graph_parse_endpoint(ep, &fwnode_ep);
 		if (ret < 0)
@@ -1172,6 +1176,31 @@ fwnode_graph_get_endpoint_by_id(const struct fwnode_handle *fwnode,
 }
 EXPORT_SYMBOL_GPL(fwnode_graph_get_endpoint_by_id);
 
+/**
+ * fwnode_graph_get_endpoint_count - Count endpoints on a device node
+ * @fwnode: The node related to a device
+ * @flags: fwnode lookup flags
+ * Count endpoints in a device node.
+ *
+ * If FWNODE_GRAPH_DEVICE_DISABLED flag is specified, also unconnected endpoints
+ * and endpoints connected to disabled devices are counted.
+ */
+unsigned int fwnode_graph_get_endpoint_count(struct fwnode_handle *fwnode,
+					     unsigned long flags)
+{
+	struct fwnode_handle *ep;
+	unsigned int count = 0;
+
+	fwnode_graph_for_each_endpoint(fwnode, ep) {
+		if (flags & FWNODE_GRAPH_DEVICE_DISABLED ||
+		    fwnode_graph_remote_available(ep))
+			count++;
+	}
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(fwnode_graph_get_endpoint_count);
+
 /**
  * fwnode_graph_parse_endpoint - parse common endpoint node properties
  * @fwnode: pointer to endpoint fwnode_handle
include/linux/property.h +2 -0
index af5a7e512c86f..e32b95f42c9db 100644
@@ -427,6 +427,8 @@ static inline bool fwnode_graph_is_endpoint(struct fwnode_handle *fwnode)
 struct fwnode_handle *
 fwnode_graph_get_endpoint_by_id(const struct fwnode_handle *fwnode,
 				u32 port, u32 endpoint, unsigned long flags);
+unsigned int fwnode_graph_get_endpoint_count(struct fwnode_handle *fwnode,
+					     unsigned long flags);
 
 #define fwnode_graph_for_each_endpoint(fwnode, child)			\
 	for (child = NULL;						\
Signature · 1 line
2.30.2
author reviewer
#6 lore raw

PATCH v2 6/7 device property: Use fwnode_graph_for_each_endpoint() macro

In reply to Sakari Ailus

Now that we have fwnode_graph_for_each_endpoint() macro, use it instead of calling fwnode_graph_get_next_endpoint() directly. It manages the iterator variable for the user without manual intervention.

---
 drivers/base/property.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/base/property.c +4 -4
index 90075c051dccf..78106192babb8 100644
@@ -1072,9 +1072,9 @@ struct fwnode_handle *
 fwnode_graph_get_remote_node(const struct fwnode_handle *fwnode, u32 port_id,
 			     u32 endpoint_id)
 {
-	struct fwnode_handle *endpoint = NULL;
+	struct fwnode_handle *endpoint;
 
-	while ((endpoint = fwnode_graph_get_next_endpoint(fwnode, endpoint))) {
+	fwnode_graph_for_each_endpoint(fwnode, endpoint) {
 		struct fwnode_endpoint fwnode_ep;
 		struct fwnode_handle *remote;
 		int ret;
@@ -1133,12 +1133,12 @@ struct fwnode_handle *
 fwnode_graph_get_endpoint_by_id(const struct fwnode_handle *fwnode,
 				u32 port, u32 endpoint, unsigned long flags)
 {
-	struct fwnode_handle *ep = NULL, *best_ep = NULL;
+	struct fwnode_handle *ep, *best_ep = NULL;
 	unsigned int best_ep_id = 0;
 	bool endpoint_next = flags & FWNODE_GRAPH_ENDPOINT_NEXT;
 	bool enabled_only = !(flags & FWNODE_GRAPH_DEVICE_DISABLED);
 
-	while ((ep = fwnode_graph_get_next_endpoint(fwnode, ep))) {
+	fwnode_graph_for_each_endpoint(fwnode, ep) {
 		struct fwnode_endpoint fwnode_ep = { 0 };
 		int ret;
 
Signature · 1 line
2.30.2
author reviewer
#7 lore raw

PATCH v2 7/7 device property: Drop fwnode_graph_get_remote_node()

In reply to Sakari Ailus

fwnode_graph_get_remote_node() is only used by the tegra-video driver. Convert it to use newer fwnode_graph_get_endpoint_by_id() and drop now-unused fwnode_graph_get_remote_node().

---
 drivers/base/property.c                | 38 --------------------------
 drivers/staging/media/tegra-video/vi.c | 12 +++++---
 include/linux/property.h               |  3 --
 3 files changed, 8 insertions(+), 45 deletions(-)
drivers/base/property.c +0 -38
index 78106192babb8..a7086e5526445 100644
@@ -1059,44 +1059,6 @@ fwnode_graph_get_remote_endpoint(const struct fwnode_handle *fwnode)
 }
 EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_endpoint);
 
-/**
- * fwnode_graph_get_remote_node - get remote parent node for given port/endpoint
- * @fwnode: pointer to parent fwnode_handle containing graph port/endpoint
- * @port_id: identifier of the parent port node
- * @endpoint_id: identifier of the endpoint node
- *
- * Return: Remote fwnode handle associated with remote endpoint node linked
- *	   to @node. Use fwnode_node_put() on it when done.
- */
-struct fwnode_handle *
-fwnode_graph_get_remote_node(const struct fwnode_handle *fwnode, u32 port_id,
-			     u32 endpoint_id)
-{
-	struct fwnode_handle *endpoint;
-
-	fwnode_graph_for_each_endpoint(fwnode, endpoint) {
-		struct fwnode_endpoint fwnode_ep;
-		struct fwnode_handle *remote;
-		int ret;
-
-		ret = fwnode_graph_parse_endpoint(endpoint, &fwnode_ep);
-		if (ret < 0)
-			continue;
-
-		if (fwnode_ep.port != port_id || fwnode_ep.id != endpoint_id)
-			continue;
-
-		remote = fwnode_graph_get_remote_port_parent(endpoint);
-		if (!remote)
-			return NULL;
-
-		return fwnode_device_is_available(remote) ? remote : NULL;
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_node);
-
 static bool fwnode_graph_remote_available(struct fwnode_handle *ep)
 {
 	struct fwnode_handle *dev_node;
drivers/staging/media/tegra-video/vi.c +8 -4
index 69d9787d53384..d1f43f465c224 100644
@@ -1845,7 +1845,6 @@ static int tegra_vi_graph_init(struct tegra_vi *vi)
 	struct tegra_vi_channel *chan;
 	struct fwnode_handle *fwnode = dev_fwnode(vi->dev);
 	int ret;
-	struct fwnode_handle *remote = NULL;
 
 	/*
 	 * Walk the links to parse the full graph. Each channel will have
@@ -1857,11 +1856,16 @@ static int tegra_vi_graph_init(struct tegra_vi *vi)
 	 * next channels.
 	 */
 	list_for_each_entry(chan, &vi->vi_chans, list) {
-		remote = fwnode_graph_get_remote_node(fwnode, chan->portnos[0],
-						      0);
-		if (!remote)
+		struct fwnode_handle *ep, *remote;
+
+		ep = fwnode_graph_get_endpoint_by_id(fwnode,
+						     chan->portnos[0], 0, 0);
+		if (!ep)
 			continue;
 
+		remote = fwnode_graph_get_remote_port_parent(ep);
+		fwnode_handle_put(ep);
+
 		ret = tegra_vi_graph_parse_one(chan, remote);
 		fwnode_handle_put(remote);
 		if (ret < 0 || list_empty(&chan->notifier.asd_list))
include/linux/property.h +0 -3
index e32b95f42c9db..3a31765895c11 100644
@@ -401,9 +401,6 @@ struct fwnode_handle *fwnode_graph_get_remote_port(
 	const struct fwnode_handle *fwnode);
 struct fwnode_handle *fwnode_graph_get_remote_endpoint(
 	const struct fwnode_handle *fwnode);
-struct fwnode_handle *
-fwnode_graph_get_remote_node(const struct fwnode_handle *fwnode, u32 port,
-			     u32 endpoint);
 
 static inline bool fwnode_graph_is_endpoint(struct fwnode_handle *fwnode)
 {
Signature · 1 line
2.30.2
#8 lore raw
In reply to Sakari Ailus
Quoted 13 lines · Sakari Ailus

Hello everyone,

Here's a few small fixes and improvements for device properties.

since v1:

- Use labelled references.

- Avoid using continue in fwnode_graph_get_endpoint_count().

- Rewrap lines in data node reference example.

Quoted 8 lines

Sakari Ailus (7):
device property: Fix fwnode_graph_devcon_match() fwnode leak device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
Documentation: ACPI: Fix data node reference documentation
Documentation: ACPI: Update references
device property: Implement fwnode_graph_get_endpoint_count() device property: Use fwnode_graph_for_each_endpoint() macro device property: Drop fwnode_graph_get_remote_node()

All applied as 5.17 material, thanks!