Skip to contentSkip to conversation

ARM: tegra: tamonten: Fix I2C3 pad setting

PATCH In review [email protected] 2 participants 2 messages Dec 1, 2021 – Feb 25, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: tegra: tamonten: Fix I2C3 pad setting

From: Richard Leitner <[email protected]>

This patch fixes the tristate configuration for i2c3 function assigned to the dtf pins on the Tamonten Tegra20 SoM.

---
 arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/tegra20-tamonten.dtsi +3 -3
index 02a1a4fa3a27..01e98605d5be 100644
@@ -184,8 +184,8 @@ uca {
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -204,7 +204,7 @@ conf_csus {
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
Signature · 1 line
2.33.1
#1 lore raw
Quoted 9 lines · On Wed, Dec 01, 2021 at 05:11:48PM +0100, [email protected] wrote:

From: Richard Leitner <[email protected]>

This patch fixes the tristate configuration for i2c3 function assigned to the dtf pins on the Tamonten Tegra20 SoM.

---
 arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

This fell through the cracks for last cycle. Applied now, thanks.

Thierry