Skip to contentSkip to conversation

mm: add new syscall set_mempolicy_home_node

PATCH Applied Aneesh Kumar K.V 2 participants 5 messages Dec 2, 2021

Subsystems (20)
lore
Share & tools
lore
#0 lore raw

v6 cover mm: add new syscall set_mempolicy_home_node

Changes from v5:
* Add missing mpol_put()
* use untagged_addr
* return error for memory policy other than MPOL_BIND and MPOL_PREFERRED_MANY
* update documentation/commit message/code comments

Changes from v4:
* Add flags == 0 check
* Make sure the home node is online before updating memory policy.

Changes from v3:
* Fix build warning reported by kernel test robot

Changes from RFC v2:
* Rebase to latest kernel
* Update numa_memory_policy.rst

Aneesh Kumar K.V (3):
mm/mempolicy: use policy_node helper with MPOL_PREFERRED_MANY mm/mempolicy: add set_mempolicy_home_node syscall mm/mempolicy: wire up syscall set_mempolicy_home_node

 .../admin-guide/mm/numa_memory_policy.rst     | 16 +++-
 arch/alpha/kernel/syscalls/syscall.tbl        |  1 +
 arch/arm/tools/syscall.tbl                    |  1 +
 arch/arm64/include/asm/unistd.h               |  2 +-
 arch/arm64/include/asm/unistd32.h             |  2 +
 arch/ia64/kernel/syscalls/syscall.tbl         |  1 +
 arch/m68k/kernel/syscalls/syscall.tbl         |  1 +
 arch/microblaze/kernel/syscalls/syscall.tbl   |  1 +
 arch/mips/kernel/syscalls/syscall_n32.tbl     |  1 +
 arch/mips/kernel/syscalls/syscall_n64.tbl     |  1 +
 arch/mips/kernel/syscalls/syscall_o32.tbl     |  1 +
 arch/parisc/kernel/syscalls/syscall.tbl       |  1 +
 arch/powerpc/kernel/syscalls/syscall.tbl      |  1 +
 arch/s390/kernel/syscalls/syscall.tbl         |  1 +
 arch/sh/kernel/syscalls/syscall.tbl           |  1 +
 arch/sparc/kernel/syscalls/syscall.tbl        |  1 +
 arch/x86/entry/syscalls/syscall_32.tbl        |  1 +
 arch/x86/entry/syscalls/syscall_64.tbl        |  1 +
 arch/xtensa/kernel/syscalls/syscall.tbl       |  1 +
 include/linux/mempolicy.h                     |  1 +
 include/linux/syscalls.h                      |  3 +
 include/uapi/asm-generic/unistd.h             |  5 +-
 kernel/sys_ni.c                               |  1 +
 mm/mempolicy.c                                | 84 ++++++++++++++++++-
 24 files changed, 125 insertions(+), 5 deletions(-)
Signature · 1 line
2.31.1
#1 lore raw

PATCH v6 1/3 mm/mempolicy: use policy_node helper with MPOL_PREFERRED_MANY

A followup patch will enable setting a home node with MPOL_PREFERRED_MANY memory policy. To facilitate that switch to using policy_node helper. There is no functional change in this patch.

Cc Ben Widawsky <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Feng Tang <[email protected]>
Cc Michal Hocko <[email protected]>
Cc Andrea Arcangeli <[email protected]>
Cc Mel Gorman <[email protected]>
Cc Mike Kravetz <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc Vlastimil Babka <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Dan Williams <[email protected]>
Cc Huang Ying <[email protected]>
---
 mm/mempolicy.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
mm/mempolicy.c +3 -2
index 10e9c87260ed..673b5fb13346 100644
@@ -2061,7 +2061,7 @@ static struct page *alloc_pages_preferred_many(gfp_t gfp, unsigned int order,
 	preferred_gfp &= ~(__GFP_DIRECT_RECLAIM | __GFP_NOFAIL);
 	page = __alloc_pages(preferred_gfp, order, nid, &pol->nodes);
 	if (!page)
-		page = __alloc_pages(gfp, order, numa_node_id(), NULL);
+		page = __alloc_pages(gfp, order, nid, NULL);
 
 	return page;
 }
@@ -2102,6 +2102,7 @@ struct page *alloc_pages_vma(gfp_t gfp, int order, struct vm_area_struct *vma,
 	}
 
 	if (pol->mode == MPOL_PREFERRED_MANY) {
+		node = policy_node(gfp, pol, node);
 		page = alloc_pages_preferred_many(gfp, order, node, pol);
 		mpol_cond_put(pol);
 		goto out;
@@ -2186,7 +2187,7 @@ struct page *alloc_pages(gfp_t gfp, unsigned order)
 		page = alloc_page_interleave(gfp, order, interleave_nodes(pol));
 	else if (pol->mode == MPOL_PREFERRED_MANY)
 		page = alloc_pages_preferred_many(gfp, order,
-				numa_node_id(), pol);
+				  policy_node(gfp, pol, numa_node_id()), pol);
 	else
 		page = __alloc_pages(gfp, order,
 				policy_node(gfp, pol, numa_node_id()),
Signature · 1 line
2.31.1
#2 lore raw

PATCH v6 2/3 mm/mempolicy: add set_mempolicy_home_node syscall

In reply to Aneesh Kumar K.V

This syscall can be used to set a home node for the MPOL_BIND and MPOL_PREFERRED_MANY memory policy. Users should use this syscall after setting up a memory policy for the specified range as shown below.

mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp,

	    new_nodes->size + 1, 0);
sys_set_mempolicy_home_node((unsigned long)p, nr_pages * page_size,
				  home_node, 0);

The syscall allows specifying a home node/preferred node from which kernel will fulfill memory allocation requests first.

For address range with MPOL_BIND memory policy, if nodemask specifies more than one node, page allocations will come from the node in the nodemask with sufficient free memory that is closest to the home node/preferred node.

For MPOL_PREFERRED_MANY if the nodemask specifies more than one node, page allocation will come from the node in the nodemask with sufficient free memory that is closest to the home node/preferred node. If there is not enough memory in all the nodes specified in the nodemask, the allocation will be attempted from the closest numa node to the home node in the system.

This helps applications to hint at a memory allocation preference node and fallback to _only_ a set of nodes if the memory is not available on the preferred node. Fallback allocation is attempted from the node which is nearest to the preferred node.

This helps applications to have control on memory allocation numa nodes and avoids default fallback to slow memory NUMA nodes. For example a system with NUMA nodes 1,2 and 3 with DRAM memory and 10, 11 and 12 of slow memory

new_nodes = numa_bitmask_alloc(nr_nodes);

numa_bitmask_setbit(new_nodes, 1);
numa_bitmask_setbit(new_nodes, 2);
numa_bitmask_setbit(new_nodes, 3);

p = mmap(NULL, nr_pages * page_size, protflag, mapflag, -1, 0); mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0);

sys_set_mempolicy_home_node(p, nr_pages * page_size, 2, 0);

This will allocate from nodes closer to node 2 and will make sure the kernel will only allocate from nodes 1, 2, and 3. Memory will not be allocated from slow memory nodes 10, 11, and 12. This differs from default MPOL_BIND behavior in that with default MPOL_BIND the allocation will be attempted from node closer to the local node. One of the reasons to specify a home node is to allow allocations from cpu less NUMA node and its nearby NUMA nodes.

With MPOL_PREFERRED_MANY on the other hand will first try to allocate from the closest node to node 2 from the node list 1, 2 and 3. If those nodes don't have enough memory, kernel will allocate from slow memory node 10, 11 and 12 which ever is closer to node 2.

Cc Ben Widawsky <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Feng Tang <[email protected]>
Cc Michal Hocko <[email protected]>
Cc Andrea Arcangeli <[email protected]>
Cc Mel Gorman <[email protected]>
Cc Mike Kravetz <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc Vlastimil Babka <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Dan Williams <[email protected]>
Cc Huang Ying <[email protected]>
---
 .../admin-guide/mm/numa_memory_policy.rst     | 16 +++-
 include/linux/mempolicy.h                     |  1 +
 mm/mempolicy.c                                | 79 +++++++++++++++++++
 3 files changed, 95 insertions(+), 1 deletion(-)
Documentation/admin-guide/mm/numa_memory_policy.rst +15 -1
index 64fd0ba0d057..a080d24df7de 100644
@@ -408,7 +408,7 @@ follows:
 Memory Policy APIs
 ==================
 
-Linux supports 3 system calls for controlling memory policy.  These APIS
+Linux supports 4 system calls for controlling memory policy.  These APIS
 always affect only the calling task, the calling task's address space, or
 some shared object mapped into the calling task's address space.
 
@@ -460,6 +460,20 @@ requested via the 'flags' argument.
 
 See the mbind(2) man page for more details.
 
+Set home node for a Range of Task's Address Spacec::
+
+	long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
+  					 unsigned long home_node,
+					 unsigned long flags);
+
+sys_set_mempolicy_home_node set the home node for a VMA policy present in the
+task's address range. The system call updates the home node only for the existing
+mempolicy range. Other address ranges are ignored. A home node is the NUMA node
+closest to which page allocation will come from. Specifying the home node override
+the default allocation policy to allocate memory close to the local node for an
+executing CPU.
+
+
 Memory Policy Command Line Interface
 ====================================
 
include/linux/mempolicy.h +1 -0
index 3c7595e81150..668389b4b53d 100644
@@ -46,6 +46,7 @@ struct mempolicy {
 	unsigned short mode; 	/* See MPOL_* above */
 	unsigned short flags;	/* See set_mempolicy() MPOL_F_* above */
 	nodemask_t nodes;	/* interleave/bind/perfer */
+	int home_node;		/* Home node to use for MPOL_BIND and MPOL_PREFERRED_MANY */
 
 	union {
 		nodemask_t cpuset_mems_allowed;	/* relative to these nodes */
mm/mempolicy.c +79 -0

103 lines not on this page · raw message

Signature · 1 line
2.31.1
reviewer Acked-by on v6 2/3
#3 lore raw

Re: [PATCH v6 2/3] mm/mempolicy: add set_mempolicy_home_node syscall

Quoted 55 lines · Aneesh Kumar K.V

This syscall can be used to set a home node for the MPOL_BIND and MPOL_PREFERRED_MANY memory policy. Users should use this syscall after setting up a memory policy for the specified range as shown below.

mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp,

	    new_nodes->size + 1, 0);
sys_set_mempolicy_home_node((unsigned long)p, nr_pages * page_size,
				  home_node, 0);

The syscall allows specifying a home node/preferred node from which kernel will fulfill memory allocation requests first.

For address range with MPOL_BIND memory policy, if nodemask specifies more than one node, page allocations will come from the node in the nodemask with sufficient free memory that is closest to the home node/preferred node.

For MPOL_PREFERRED_MANY if the nodemask specifies more than one node, page allocation will come from the node in the nodemask with sufficient free memory that is closest to the home node/preferred node. If there is not enough memory in all the nodes specified in the nodemask, the allocation will be attempted from the closest numa node to the home node in the system.

This helps applications to hint at a memory allocation preference node and fallback to _only_ a set of nodes if the memory is not available on the preferred node. Fallback allocation is attempted from the node which is nearest to the preferred node.

This helps applications to have control on memory allocation numa nodes and avoids default fallback to slow memory NUMA nodes. For example a system with NUMA nodes 1,2 and 3 with DRAM memory and 10, 11 and 12 of slow memory

new_nodes = numa_bitmask_alloc(nr_nodes);

numa_bitmask_setbit(new_nodes, 1);
numa_bitmask_setbit(new_nodes, 2);
numa_bitmask_setbit(new_nodes, 3);

p = mmap(NULL, nr_pages * page_size, protflag, mapflag, -1, 0); mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0);

sys_set_mempolicy_home_node(p, nr_pages * page_size, 2, 0);

This will allocate from nodes closer to node 2 and will make sure the kernel will only allocate from nodes 1, 2, and 3. Memory will not be allocated from slow memory nodes 10, 11, and 12. This differs from default MPOL_BIND behavior in that with default MPOL_BIND the allocation will be attempted from node closer to the local node. One of the reasons to specify a home node is to allow allocations from cpu less NUMA node and its nearby NUMA nodes.

With MPOL_PREFERRED_MANY on the other hand will first try to allocate from the closest node to node 2 from the node list 1, 2 and 3. If those nodes don't have enough memory, kernel will allocate from slow memory node 10, 11 and 12 which ever is closer to node 2.

Quoted 14 lines
Cc Ben Widawsky <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Feng Tang <[email protected]>
Cc Michal Hocko <[email protected]>
Cc Andrea Arcangeli <[email protected]>
Cc Mel Gorman <[email protected]>
Cc Mike Kravetz <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc Vlastimil Babka <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Dan Williams <[email protected]>
Cc Huang Ying <[email protected]>

LGTM

Thanks!

Signature · 2 lines
Michal Hocko
SUSE Labs
#4 lore raw

PATCH v6 3/3 mm/mempolicy: wire up syscall set_mempolicy_home_node

In reply to Aneesh Kumar K.V

Cc: Ben Widawsky <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: [email protected]
Fix build failure

---
 arch/alpha/kernel/syscalls/syscall.tbl      | 1 +
 arch/arm/tools/syscall.tbl                  | 1 +
 arch/arm64/include/asm/unistd.h             | 2 +-
 arch/arm64/include/asm/unistd32.h           | 2 ++
 arch/ia64/kernel/syscalls/syscall.tbl       | 1 +
 arch/m68k/kernel/syscalls/syscall.tbl       | 1 +
 arch/microblaze/kernel/syscalls/syscall.tbl | 1 +
 arch/mips/kernel/syscalls/syscall_n32.tbl   | 1 +
 arch/mips/kernel/syscalls/syscall_n64.tbl   | 1 +
 arch/mips/kernel/syscalls/syscall_o32.tbl   | 1 +
 arch/parisc/kernel/syscalls/syscall.tbl     | 1 +
 arch/powerpc/kernel/syscalls/syscall.tbl    | 1 +
 arch/s390/kernel/syscalls/syscall.tbl       | 1 +
 arch/sh/kernel/syscalls/syscall.tbl         | 1 +
 arch/sparc/kernel/syscalls/syscall.tbl      | 1 +
 arch/x86/entry/syscalls/syscall_32.tbl      | 1 +
 arch/x86/entry/syscalls/syscall_64.tbl      | 1 +
 arch/xtensa/kernel/syscalls/syscall.tbl     | 1 +
 include/linux/syscalls.h                    | 3 +++
 include/uapi/asm-generic/unistd.h           | 5 ++++-
 kernel/sys_ni.c                             | 1 +
 21 files changed, 27 insertions(+), 2 deletions(-)
arch/alpha/kernel/syscalls/syscall.tbl +1 -0
index ca5a32228cd6..3515bc4f16a4 100644
@@ -489,3 +489,4 @@
 # 557 reserved for memfd_secret
 558	common	process_mrelease		sys_process_mrelease
 559	common  futex_waitv                     sys_futex_waitv
+560	common	set_mempolicy_home_node		sys_ni_syscall
arch/arm/tools/syscall.tbl +1 -0
index 543100151f2b..ac964612d8b0 100644
@@ -463,3 +463,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common	futex_waitv			sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/arm64/include/asm/unistd.h +1 -1
index 6bdb5f5db438..4e65da3445c7 100644
@@ -38,7 +38,7 @@
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
 #define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
 
-#define __NR_compat_syscalls		450
+#define __NR_compat_syscalls		451
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
arch/arm64/include/asm/unistd32.h +2 -0
index 41ea1195e44b..604a2053d006 100644
@@ -905,6 +905,8 @@ __SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self)
 __SYSCALL(__NR_process_mrelease, sys_process_mrelease)
 #define __NR_futex_waitv 449
 __SYSCALL(__NR_futex_waitv, sys_futex_waitv)
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
 
 /*
  * Please add new compat syscalls above this comment and update
arch/ia64/kernel/syscalls/syscall.tbl +1 -0
index 707ae121f6d3..78b1d03e86e1 100644
@@ -370,3 +370,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/m68k/kernel/syscalls/syscall.tbl +1 -0
index 45bc32a41b90..b1f3940bc298 100644
@@ -449,3 +449,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/microblaze/kernel/syscalls/syscall.tbl +1 -0
index 2204bde3ce4a..820145e47350 100644
@@ -455,3 +455,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/mips/kernel/syscalls/syscall_n32.tbl +1 -0
index 72d02d363f36..253ff994ed2e 100644
@@ -388,3 +388,4 @@
 # 447 reserved for memfd_secret
 448	n32	process_mrelease		sys_process_mrelease
 449	n32	futex_waitv			sys_futex_waitv
+450	n32	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/mips/kernel/syscalls/syscall_n64.tbl +1 -0
index e2c481fcede6..3f1886ad9d80 100644
@@ -364,3 +364,4 @@
 # 447 reserved for memfd_secret
 448	n64	process_mrelease		sys_process_mrelease
 449	n64	futex_waitv			sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/mips/kernel/syscalls/syscall_o32.tbl +1 -0
index 3714c97b2643..8f243e35a7b2 100644
@@ -437,3 +437,4 @@
 # 447 reserved for memfd_secret
 448	o32	process_mrelease		sys_process_mrelease
 449	o32	futex_waitv			sys_futex_waitv
+450	o32	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/parisc/kernel/syscalls/syscall.tbl +1 -0
index 358c00000755..68b46fe2f17c 100644
@@ -447,3 +447,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common	futex_waitv			sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/powerpc/kernel/syscalls/syscall.tbl +1 -0
index 15109af9d075..2600b4237292 100644
@@ -529,3 +529,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450 	nospu	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/s390/kernel/syscalls/syscall.tbl +1 -0
index ed9c5c2eafad..799147658dee 100644
@@ -452,3 +452,4 @@
 # 447 reserved for memfd_secret
 448  common	process_mrelease	sys_process_mrelease		sys_process_mrelease
 449  common	futex_waitv		sys_futex_waitv			sys_futex_waitv
+450  common	set_mempolicy_home_node	sys_set_mempolicy_home_node	sys_set_mempolicy_home_node
arch/sh/kernel/syscalls/syscall.tbl +1 -0
index d9539d28bdaa..2de85c977f54 100644
@@ -452,3 +452,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/sparc/kernel/syscalls/syscall.tbl +1 -0
index 46adabcb1720..4398cc6fb68d 100644
@@ -495,3 +495,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/x86/entry/syscalls/syscall_32.tbl +1 -0
index 7e25543693de..320480a8db4f 100644
@@ -454,3 +454,4 @@
 447	i386	memfd_secret		sys_memfd_secret
 448	i386	process_mrelease	sys_process_mrelease
 449	i386	futex_waitv		sys_futex_waitv
+450	i386	set_mempolicy_home_node		sys_set_mempolicy_home_node
arch/x86/entry/syscalls/syscall_64.tbl +1 -0
index fe8f8dd157b4..c84d12608cd2 100644
@@ -371,6 +371,7 @@
 447	common	memfd_secret		sys_memfd_secret
 448	common	process_mrelease	sys_process_mrelease
 449	common	futex_waitv		sys_futex_waitv
+450	common	set_mempolicy_home_node	sys_set_mempolicy_home_node
 
 #
 # Due to a historical design error, certain syscalls are numbered differently
arch/xtensa/kernel/syscalls/syscall.tbl +1 -0
index 3e3e1a506bed..52c94ab5c205 100644
@@ -420,3 +420,4 @@
 # 447 reserved for memfd_secret
 448	common	process_mrelease		sys_process_mrelease
 449	common  futex_waitv                     sys_futex_waitv
+450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
include/linux/syscalls.h +3 -0
index 528a478dbda8..819c0cb00b6d 100644
@@ -1057,6 +1057,9 @@ asmlinkage long sys_landlock_add_rule(int ruleset_fd, enum landlock_rule_type ru
 		const void __user *rule_attr, __u32 flags);
 asmlinkage long sys_landlock_restrict_self(int ruleset_fd, __u32 flags);
 asmlinkage long sys_memfd_secret(unsigned int flags);
+asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
+					    unsigned long home_node,
+					    unsigned long flags);
 
 /*
  * Architecture-specific system calls
include/uapi/asm-generic/unistd.h +4 -1
index 4557a8b6086f..1c48b0ae3ba3 100644
@@ -883,8 +883,11 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease)
 #define __NR_futex_waitv 449
 __SYSCALL(__NR_futex_waitv, sys_futex_waitv)
 
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
+
 #undef __NR_syscalls
-#define __NR_syscalls 450
+#define __NR_syscalls 451
 
 /*
  * 32 bit systems traditionally used different
kernel/sys_ni.c +1 -0
index d1944258cfc0..a492f159624f 100644
@@ -297,6 +297,7 @@ COND_SYSCALL(get_mempolicy);
 COND_SYSCALL(set_mempolicy);
 COND_SYSCALL(migrate_pages);
 COND_SYSCALL(move_pages);
+COND_SYSCALL(set_mempolicy_home_node);
 
 COND_SYSCALL(perf_event_open);
 COND_SYSCALL(accept4);
Signature · 1 line
2.31.1