nfsd: Initial implementation of NFSv4 Courteous Server
Subsystems (4)
Dai Ngo
reviewerv5 cover nfsd: Initial implementation of NFSv4 Courteous Server
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
A server which does not immediately expunge the state on lease expiration is known as a Courteous Server. A Courteous Server continues to recognize previously generated state tokens as valid until conflict arises between the expired state and the requests from another client, or the server reboots.
The v2 patch includes the following:
. add new callback, lm_expire_lock, to lock_manager_operations to
allow the lock manager to take appropriate action with conflict lock.
. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are
waiters for client's locks.
. modify client_info_show to show courtesy client and seconds from
last renew.
. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWN in the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.
The v3 patch includes the following:
. modified posix_test_lock to check and resolve conflict locks
to handle NLM TEST and NFSv4 LOCKT requests.
. separate out fix for back channel stuck in SEQ4_STATUS_CB_PATH_DOWN.
The v4 patch includes:
. rework nfsd_check_courtesy to avoid dead lock of fl_lock and client_lock
by asking the laudromat thread to destroy the courtesy client.
. handle NFSv4 share reservation conflicts with courtesy client. This
includes conflicts between access mode and deny mode and vice versa.
. drop the patch for back channel stuck in SEQ4_STATUS_CB_PATH_DOWN.
The v5 patch includes:
. fix recursive locking of file_rwsem from posix_lock_file.
. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
Dai Ngo
reviewerRFC PATCH v5 1/2 fs/lock: add new callback, lm_expire_lock, to lock_manager_operations
Add new callback, lm_expire_lock, to lock_manager_operations to allow the lock manager to take appropriate action to resolve the lock conflict if possible. The callback takes 2 arguments, file_lock of the blocker and a testonly flag:
testonly = 1 check and return true if lock conflict can be resolved
else return false.
testonly = 0 resolve the conflict if possible, return true if conflict
was resolved esle return false.
Lock manager, such as NFSv4 courteous server, uses this callback to resolve conflict by destroying lock owner, or the NFSv4 courtesy client (client that has expired but allowed to maintains its states) that owns the lock.
--- fs/locks.c | 28 +++++++++++++++++++++++++--- include/linux/fs.h | 1 + 2 files changed, 26 insertions(+), 3 deletions(-)
fs/locks.c +25 -3
@@ -954,6 +954,7 @@ posix_test_lock(struct file *filp, struct file_lock *fl)struct file_lock *cfl;struct file_lock_context *ctx;struct inode *inode =locks_inode (filp); +bool ret; ctx =smp_load_acquire (&inode->i_flctx);if (!ctx ||list_empty_careful (&ctx->flc_posix)) {
@@ -962,11 +963,20 @@ posix_test_lock(struct file *filp, struct file_lock *fl) }spin_lock (&ctx->flc_lock); +retry:list_for_each_entry (cfl, &ctx->flc_posix, fl_list) { -if (posix_locks_conflict (fl, cfl)) { -locks_copy_conflock (fl, cfl); - goto out; +if (!posix_locks_conflict (fl, cfl)) +continue ; +if (cfl->fl_lmops && cfl->fl_lmops->lm_expire_lock && + cfl->fl_lmops->lm_expire_lock (cfl,1 )) { +spin_unlock (&ctx->flc_lock); + ret = cfl->fl_lmops->lm_expire_lock (cfl,0 ); +spin_lock (&ctx->flc_lock); +if (ret) + goto retry; } +locks_copy_conflock (fl, cfl); + goto out; } fl->fl_type =F_UNLCK ; out:
@@ -1140,6 +1150,7 @@ static int posix_lock_inode(struct inode *inode, struct file_lock *request,int error;bool added = false;LIST_HEAD (dispose); +bool ret; ctx =locks_get_lock_context (inode, request->fl_type);if (!ctx)
@@ -1166,9 +1177,20 @@ static int posix_lock_inode(struct inode *inode, struct file_lock *request,* blocker's list of waiters and the global blocked_hash. */ if (request->fl_type !=F_UNLCK ) { +retry:list_for_each_entry (fl, &ctx->flc_posix, fl_list) {if (!posix_locks_conflict (request, fl))continue ; +if (fl->fl_lmops && fl->fl_lmops->lm_expire_lock && + fl->fl_lmops->lm_expire_lock (fl,1 )) { +spin_unlock (&ctx->flc_lock); +percpu_up_read (&file_rwsem); + ret = fl->fl_lmops->lm_expire_lock (fl,0 ); +percpu_down_read (&file_rwsem); +spin_lock (&ctx->flc_lock); +if (ret) + goto retry; + }if (conflock)locks_copy_conflock (conflock, fl); error = -EAGAIN ;
include/linux/fs.h +1 -0
@@ -1071,6 +1071,7 @@ struct lock_manager_operations {int (*lm_change)(struct file_lock *,int ,struct list_head *);void (*lm_setup)(struct file_lock *,void **);bool (*lm_breaker_owns_lease)(struct file_lock *); +bool (*lm_expire_lock)(struct file_lock *fl,bool testonly); };struct lock_manager {
Signature · 1 line
2.9.5
Dai Ngo
reviewerRFC PATCH v5 2/2 nfsd: Initial implementation of NFSv4 Courteous Server
In reply to Dai NgoCurrently an NFSv4 client must maintain its lease by using the at least one of the state tokens or if nothing else, by issuing a RENEW (4.0), or a singleton SEQUENCE (4.1) at least once during each lease period. If the client fails to renew the lease, for any reason, the Linux server expunges the state tokens immediately upon detection of the "failure to renew the lease" condition and begins returning NFS4ERR_EXPIRED if the client should reconnect and attempt to use the (now) expired state.
The default lease period for the Linux server is 90 seconds. The typical client cuts that in half and will issue a lease renewing operation every 45 seconds. The 90 second lease period is very short considering the potential for moderately long term network partitions. A network partition refers to any loss of network connectivity between the NFS client and the NFS server, regardless of its root cause. This includes NIC failures, NIC driver bugs, network misconfigurations & administrative errors, routers & switches crashing and/or having software updates applied, even down to cables being physically pulled. In most cases, these network failures are transient, although the duration is unknown.
A server which does not immediately expunge the state on lease expiration is known as a Courteous Server. A Courteous Server continues to recognize previously generated state tokens as valid until conflict arises between the expired state and the requests from another client, or the server reboots.
The initial implementation of the Courteous Server will do the following:
. when the laundromat thread detects an expired client and if that client still has established states on the Linux server and there is no waiters for the client's locks then mark the client as a COURTESY_CLIENT and skip destroying the client and all its states, otherwise destroy the client as usual.
. detects conflict of OPEN request with COURTESY_CLIENT, destroys the expired client and all its states, skips the delegation recall then allows the conflicting request to succeed.
. detects conflict of LOCK/LOCKT, NLM LOCK and TEST, and local locks requests with COURTESY_CLIENT, destroys the expired client and all its states then allows the conflicting request to succeed.
--- fs/nfsd/nfs4state.c | 269 +++++++++++++++++++++++++++++++++++++++++++++++++++- fs/nfsd/state.h | 3 + 2 files changed, 269 insertions(+), 3 deletions(-)
fs/nfsd/nfs4state.c +266 -3
@@ -125,6 +125,11 @@ static void free_session(struct nfsd4_session *);static const struct nfsd4_callback_ops nfsd4_cb_recall_ops;static const struct nfsd4_callback_ops nfsd4_cb_notify_lock_ops; +static struct workqueue_struct *laundry_wq; +static void laundromat_main (struct work_struct *); + +static int courtesy_client_expiry = (24 *60 *60 );/* in secs */ +static bool is_session_dead (struct nfsd4_session *ses) {return ses->se_flags &NFS4_SESSION_DEAD ;
@@ -172,6 +177,7 @@ renew_client_locked(struct nfs4_client *clp)list_move_tail (&clp->cl_lru, &nn->client_lru); clp->cl_time =ktime_get_boottime_seconds (); +clear_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags); }static void put_client_renew_locked (struct nfs4_client *clp)
@@ -2389,6 +2395,10 @@ static int client_info_show(struct seq_file *m, void *v)seq_puts (m,"status: confirmed\n" ); else seq_puts(m, "status: unconfirmed\n"); +seq_printf (m,"courtesy client: %s\n" , +test_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags) ?"yes" :"no" ); +seq_printf (m,"seconds from last renew: %lld\n" , +ktime_get_boottime_seconds () - clp->cl_time);seq_printf (m,"name: " );seq_quote_mem (m, clp->cl_name.data, clp->cl_name.len);seq_printf (m,"\nminor version: %d\n" , clp->cl_minorversion);
@@ -4662,6 +4672,33 @@ static void nfsd_break_one_deleg(struct nfs4_delegation *dp)nfsd4_run_cb (&dp->dl_recall); } +/* +* This function is called when a file is opened and there is a +* delegation conflict with another client. If the other client +* is a courtesy client then kick start the laundromat to destroy +* it. +*/ +static bool +nfsd_check_courtesy_client (struct nfs4_delegation *dp) +{ +struct svc_rqst *rqst; +struct nfs4_client *clp = dp->dl_recall.cb_clp; +struct nfsd_net *nn =net_generic (clp->net, nfsd_net_id); + +if (!i_am_nfsd ()) + goto out; + rqst =kthread_data (current); +if (rqst->rq_prog !=NFS_PROGRAM || rqst->rq_vers <4 ) +return false; +out: +if (test_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags)) { +set_bit (NFSD4_DESTROY_COURTESY_CLIENT , &clp->cl_flags); +mod_delayed_work (laundry_wq, &nn->laundromat_work,0 ); +return true; + } +return false; +} +/* Called from break_lease() with i_lock held. */ static bool nfsd_break_deleg_cb (struct file_lock *fl)
@@ -4670,6 +4707,8 @@ nfsd_break_deleg_cb(struct file_lock *fl)struct nfs4_delegation *dp = (struct nfs4_delegation *)fl->fl_owner;struct nfs4_file *fp = dp->dl_stid.sc_file; +if (nfsd_check_courtesy_client (dp)) +return false;trace_nfsd_cb_recall (&dp->dl_stid);/*
@@ -4912,6 +4951,104 @@ nfsd4_truncate(struct svc_rqst *rqstp, struct svc_fh *fh,return nfsd_setattr (rqstp, fh, &iattr,0 , (time64_t )0 ); } +static bool +__nfs4_check_deny_bmap (struct nfs4_file *fp,struct nfs4_ol_stateid *stp, +u32 access,bool share_access) +{ +if (share_access) { +if (!stp->st_deny_bmap) +return false; + +if ((stp->st_deny_bmap & (1 <<NFS4_SHARE_DENY_BOTH )) || + (access &NFS4_SHARE_ACCESS_READ && + stp->st_deny_bmap & (1 <<NFS4_SHARE_DENY_READ )) || + (access &NFS4_SHARE_ACCESS_WRITE && + stp->st_deny_bmap & (1 <<NFS4_SHARE_DENY_WRITE ))) { +return true; + } +return false; + } +if ((access &NFS4_SHARE_DENY_BOTH ) || + (access &NFS4_SHARE_DENY_READ && + stp->st_access_bmap & (1 <<NFS4_SHARE_ACCESS_READ )) || + (access &NFS4_SHARE_DENY_WRITE && + stp->st_access_bmap & (1 <<NFS4_SHARE_ACCESS_WRITE ))) { +return true; + } +return false; +} + +/* +* access: access mode if share_access is true else is deny mode +*/ +static bool +nfs4_check_deny_bmap (struct nfs4_client *clp,struct nfs4_file *fp, +u32 access,bool share_access) +{ +int i; +struct nfs4_openowner *oo; +struct nfs4_stateowner *so, *tmp; +struct nfs4_ol_stateid *stp, *stmp; + +spin_lock (&clp->cl_lock); +for (i =0 ; i <OWNER_HASH_SIZE ; i++) { +list_for_each_entry_safe (so, tmp, &clp->cl_ownerstr_hashtbl[i], + so_strhash) { +if (!so->so_is_open_owner) +continue ; + oo =openowner (so); +list_for_each_entry_safe (stp, stmp, + &oo->oo_owner.so_stateids, st_perstateowner) { +if (__nfs4_check_deny_bmap (fp, stp, access, + share_access)) { +spin_unlock (&clp->cl_lock); +return true; + } + } + } + } +spin_unlock (&clp->cl_lock); +return false; +} + +static int +nfs4_destroy_clnts_with_sresv_conflict (struct svc_rqst *rqstp, +struct nfs4_client *clp,struct nfs4_file *fp, +u32 access,bool share_access) +{ +int cnt =0 ; +struct nfs4_client *cl; +struct list_head *pos, *next, reaplist; +struct nfsd_net *nn =net_generic (SVC_NET (rqstp), nfsd_net_id); + +INIT_LIST_HEAD (&reaplist); +spin_lock (&nn->client_lock); +list_for_each_safe (pos, next, &nn->client_lru) { + cl = list_entry(pos, struct nfs4_client, cl_lru); +if (cl == clp || + (!test_bit (NFSD4_COURTESY_CLIENT , &cl->cl_flags) && + !test_bit (NFSD4_DESTROY_COURTESY_CLIENT , &cl->cl_flags))) +continue ; +/* +* check CS client for deny_bmap that +* matches nfs4_file and access mode +*/ +if (nfs4_check_deny_bmap (cl, fp, access, share_access)) { +if (mark_client_expired_locked (cl)) +continue ; +list_add (&cl->cl_lru, &reaplist); + } + } +spin_unlock (&nn->client_lock); +list_for_each_safe (pos, next, &reaplist) { + cl = list_entry(pos, struct nfs4_client, cl_lru); +list_del_init (&cl->cl_lru); +expire_client (cl); + cnt++; + } +return cnt; +} +static __be32 nfs4_get_vfs_file (struct svc_rqst *rqstp,struct nfs4_file *fp,struct svc_fh *cur_fh,struct nfs4_ol_stateid *stp,struct nfsd4_open *open)
@@ -4921,6 +5058,7 @@ static __be32 nfs4_get_vfs_file(struct svc_rqst *rqstp, struct nfs4_file *fp,int oflag =nfs4_access_to_omode (open->op_share_access);int access =nfs4_access_to_access (open->op_share_access);unsigned char old_access_bmap, old_deny_bmap; +int cnt =0 ;spin_lock (&fp->fi_lock);
@@ -4928,16 +5066,46 @@ static __be32 nfs4_get_vfs_file(struct svc_rqst *rqstp, struct nfs4_file *fp,* Are we trying to set a deny mode that would conflict with * current access? */ +chk_deny: status =nfs4_file_check_deny (fp, open->op_share_deny);if (status != nfs_ok) {spin_unlock (&fp->fi_lock); +if (status != nfserr_share_denied) + goto out; +/* +* search and destroy all courtesy clients that own +* openstate of nfs4_file, fp, that has st_access_bmap +* that matches open->op_share_deny +*/ + cnt =nfs4_destroy_clnts_with_sresv_conflict (rqstp, + stp->st_stateowner->so_client, fp, + open->op_share_deny, false); +if (cnt) { +spin_lock (&fp->fi_lock); + goto chk_deny; + } goto out; }/* set access to the file */ +get_access: status =nfs4_file_get_access (fp, open->op_share_access);if (status != nfs_ok) {spin_unlock (&fp->fi_lock); +if (status != nfserr_share_denied) + goto out; +/* +* search and destroy all courtesy clients that own +* openstate of nfs4_file, fp, that has st_deny_bmap +* that matches open->op_share_access. +*/ + cnt =nfs4_destroy_clnts_with_sresv_conflict (rqstp, + stp->st_stateowner->so_client, fp, + open->op_share_access, true); +if (cnt) { +spin_lock (&fp->fi_lock); + goto get_access; + } goto out; }
@@ -5289,6 +5457,22 @@ static void nfsd4_deleg_xgrade_none_ext(struct nfsd4_open *open,*/ } +static bool +nfs4_destroy_courtesy_client (struct nfs4_client *clp) +{ +struct nfsd_net *nn =net_generic (clp->net, nfsd_net_id); + +spin_lock (&nn->client_lock); +if (!test_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags) || +mark_client_expired_locked (clp)) { +spin_unlock (&nn->client_lock); +return false; + } +spin_unlock (&nn->client_lock); +expire_client (clp); +return true; +} +__be32 nfsd4_process_open2 (struct svc_rqst *rqstp,struct svc_fh *current_fh,struct nfsd4_open *open) {
@@ -5572,6 +5756,47 @@ static void nfsd4_ssc_expire_umount(struct nfsd_net *nn) }#endif +static +bool nfs4_anylock_conflict (struct nfs4_client *clp) +{ +int i; +struct nfs4_stateowner *so, *tmp; +struct nfs4_lockowner *lo; +struct nfs4_ol_stateid *stp; +struct nfs4_file *nf; +struct inode *ino; +struct file_lock_context *ctx; +struct file_lock *fl; + +for (i =0 ; i <OWNER_HASH_SIZE ; i++) { +/* scan each lock owner */ +list_for_each_entry_safe (so, tmp, &clp->cl_ownerstr_hashtbl[i], + so_strhash) { +if (so->so_is_open_owner) +continue ; + +/* scan lock states of this lock owner */ + lo =lockowner (so); +list_for_each_entry (stp, &lo->lo_owner.so_stateids, + st_perstateowner) { + nf = stp->st_stid.sc_file; + ino = nf->fi_inode; + ctx = ino->i_flctx; +if (!ctx) +continue ; +/* check each lock belongs to this lock state */ +list_for_each_entry (fl, &ctx->flc_posix, fl_list) { +if (fl->fl_owner != lo) +continue ; +if (!list_empty (&fl->fl_blocked_requests)) +return true; + } + } + } + } +return false; +} +static time64_t nfs4_laundromat (struct nfsd_net *nn) {
@@ -5587,7 +5812,9 @@ nfs4_laundromat(struct nfsd_net *nn) };struct nfs4_cpntf_state *cps;copy_stateid_t *cps_t; +struct nfs4_stid *stid;int i; +int id =0 ;if (clients_still_reclaiming (nn)) { lt.new_timeo =0 ;
@@ -5608,8 +5835,33 @@ nfs4_laundromat(struct nfsd_net *nn)spin_lock (&nn->client_lock);list_for_each_safe (pos, next, &nn->client_lru) { clp = list_entry(pos, struct nfs4_client, cl_lru); +if (test_bit (NFSD4_DESTROY_COURTESY_CLIENT , &clp->cl_flags)) { +clear_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags); + goto exp_client; + } +if (test_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags)) { +if (ktime_get_boottime_seconds () >= clp->courtesy_client_expiry) + goto exp_client; +/* +* after umount, v4.0 client is still +* around waiting to be expired +*/ +if (clp->cl_minorversion) +continue ; + }if (!state_expired (<, clp->cl_time))break ; +spin_lock (&clp->cl_lock); + stid =idr_get_next (&clp->cl_stateids, &id); +spin_unlock (&clp->cl_lock); +if (stid && !nfs4_anylock_conflict (clp)) { +/* client still has states */ + clp->courtesy_client_expiry = +ktime_get_boottime_seconds () + courtesy_client_expiry; +set_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags); +continue ; + } +exp_client:if (mark_client_expired_locked (clp))continue ;list_add (&clp->cl_lru, &reaplist);
@@ -5689,9 +5941,6 @@ nfs4_laundromat(struct nfsd_net *nn)return max_t (time64_t, lt.new_timeo,NFSD_LAUNDROMAT_MINTIMEOUT ); } -static struct workqueue_struct *laundry_wq; -static void laundromat_main (struct work_struct *); -static void laundromat_main (struct work_struct *laundry) {
@@ -6496,6 +6745,19 @@ nfs4_transform_lock_offset(struct file_lock *lock) lock->fl_end =OFFSET_MAX ; } +/* return true if lock was expired else return false */ +static bool +nfsd4_fl_expire_lock (struct file_lock *fl,bool testonly) +{ +struct nfs4_lockowner *lo = (struct nfs4_lockowner *)fl->fl_owner; +struct nfs4_client *clp = lo->lo_owner.so_client; + +if (testonly) +return test_bit (NFSD4_COURTESY_CLIENT , &clp->cl_flags) ? + true : false; +return nfs4_destroy_courtesy_client (clp); +} +static fl_owner_t nfsd4_fl_get_owner (fl_owner_t owner) {
@@ -6543,6 +6805,7 @@ static const struct lock_manager_operations nfsd_posix_mng_ops = { .lm_notify = nfsd4_lm_notify, .lm_get_owner = nfsd4_fl_get_owner, .lm_put_owner = nfsd4_fl_put_owner, + .lm_expire_lock = nfsd4_fl_expire_lock, }; static inline void
fs/nfsd/state.h +3 -0
@@ -345,6 +345,8 @@ struct nfs4_client {#define NFSD4_CLIENT_UPCALL_LOCK (5)/* upcall serialization */ #define NFSD4_CLIENT_CB_FLAG_MASK (1 << NFSD4_CLIENT_CB_UPDATE | \ 1 << NFSD4_CLIENT_CB_KILL) +#define NFSD4_COURTESY_CLIENT (6)/* be nice to expired client */ +#define NFSD4_DESTROY_COURTESY_CLIENT (7)unsigned long cl_flags;const struct cred *cl_cb_cred;struct rpc_clnt *cl_cb_client;
@@ -385,6 +387,7 @@ struct nfs4_client {struct list_head async_copies;/* list of async copies */ spinlock_t async_lock;/* lock for async copies */ atomic_t cl_cb_inflight;/* Outstanding callbacks */ +int courtesy_client_expiry; };/* struct nfs4_client_reset
Signature · 1 line
2.9.5
Quoted 4 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
--b.
Quoted 53 lines
A server which does not immediately expunge the state on lease expiration is known as a Courteous Server. A Courteous Server continues to recognize previously generated state tokens as valid until conflict arises between the expired state and the requests from another client, or the server reboots.
The v2 patch includes the following:
. add new callback,
lm_expire_lock, tolock_manager_operationsto
allow the lock manager to take appropriate action with conflict lock.. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are
waiters for client's locks.. modify
client_info_showto show courtesy client and seconds from
last renew.. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWNin the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.The v3 patch includes the following:
. modified
posix_test_lockto check and resolve conflict locks
to handle NLM TEST and NFSv4 LOCKT requests.. separate out fix for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v4 patch includes:
. rework
nfsd_check_courtesyto avoid dead lock offl_lockandclient_lock
by asking the laudromat thread to destroy the courtesy client.. handle NFSv4 share reservation conflicts with courtesy client. This
includes conflicts between access mode and deny mode and vice versa.. drop the patch for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v5 patch includes:
. fix recursive locking of
file_rwsemfromposix_lock_file.. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
[email protected]
reviewerQuoted 7 lines · J. Bruce Fields
Quoted 3 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
It's weird, this test passes on my system:
[root@nfsvmf25 nfs4.0]# ./testserver.py $server --rundeps -v OPEN18
INIT st_setclientid.testValid : RUNNING INIT st_setclientid.testValid : PASS MKFILE st_open.testOpen : RUNNING MKFILE st_open.testOpen : PASS OPEN18 st_open.testShareConflict1 : RUNNING OPEN18 st_open.testShareConflict1 : PASS ************************************************** INIT st_setclientid.testValid : PASS OPEN18 st_open.testShareConflict1 : PASS MKFILE st_open.testOpen : PASS
**************************************************
Command line asked for 3 of 673 tests
Of those: 0 Skipped, 0 Failed, 0 Warned, 3 Passed
[root@nfsvmf25 nfs4.0]#
Do you have a network trace?
-Dai
Quoted 55 lines
--b.
Quoted 52 lines
A server which does not immediately expunge the state on lease expiration is known as a Courteous Server. A Courteous Server continues to recognize previously generated state tokens as valid until conflict arises between the expired state and the requests from another client, or the server reboots.
The v2 patch includes the following:
. add new callback,
lm_expire_lock, tolock_manager_operationsto
allow the lock manager to take appropriate action with conflict lock.. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are
waiters for client's locks.. modify
client_info_showto show courtesy client and seconds from
last renew.. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWNin the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.The v3 patch includes the following:
. modified
posix_test_lockto check and resolve conflict locks
to handle NLM TEST and NFSv4 LOCKT requests.. separate out fix for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v4 patch includes:
. rework
nfsd_check_courtesyto avoid dead lock offl_lockandclient_lock
by asking the laudromat thread to destroy the courtesy client.. handle NFSv4 share reservation conflicts with courtesy client. This
includes conflicts between access mode and deny mode and vice versa.. drop the patch for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v5 patch includes:
. fix recursive locking of
file_rwsemfromposix_lock_file.. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
Quoted 24 lines · On Fri, Oct 01, 2021 at 02:41:55PM -0700, [email protected] wrote:
Quoted 7 lines · J. Bruce Fields
Quoted 3 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
It's weird, this test passes on my system:
[root@nfsvmf25 nfs4.0]# ./testserver.py $server --rundeps -v OPEN18
INIT st_setclientid.testValid : RUNNING INIT st_setclientid.testValid : PASS MKFILE st_open.testOpen : RUNNING MKFILE st_open.testOpen : PASS OPEN18 st_open.testShareConflict1 : RUNNING OPEN18 st_open.testShareConflict1 : PASS ************************************************** INIT st_setclientid.testValid : PASS OPEN18 st_open.testShareConflict1 : PASS MKFILE st_open.testOpen : PASS
Quoted 6 lines
**************************************************
Command line asked for 3 of 673 tests
Of those: 0 Skipped, 0 Failed, 0 Warned, 3 Passed
[root@nfsvmf25 nfs4.0]#Do you have a network trace?
Yeah, weirdly, I think it's failing only when I run it with all the other pynfs tests, not when I run it alone. I'll check again and see if I can get a trace, probably next week.
--b.
[email protected]
reviewerHi Bruce,
Just a reminder that this patch is still waiting for your review.
Thanks,
-Dai
Quoted 88 lines · On 10/1/21 2:41 PM, [email protected] wrote:
Quoted 7 lines · J. Bruce Fields
Quoted 3 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
It's weird, this test passes on my system:
[root@nfsvmf25 nfs4.0]# ./testserver.py $server --rundeps -v OPEN18 INIT st_setclientid.testValid : RUNNING
INIT st_setclientid.testValid : PASS
MKFILE st_open.testOpen : RUNNING
MKFILE st_open.testOpen : PASS
OPEN18 st_open.testShareConflict1 : RUNNING
OPEN18 st_open.testShareConflict1 : PASS
**************************************************
INIT st_setclientid.testValid : PASS
OPEN18 st_open.testShareConflict1 : PASS
MKFILE st_open.testOpen : PASS
**************************************************
Command line asked for 3 of 673 tests
Of those: 0 Skipped, 0 Failed, 0 Warned, 3 Passed [root@nfsvmf25 nfs4.0]#Do you have a network trace?
-Dai
Quoted 55 lines
--b.
Quoted 52 lines
A server which does not immediately expunge the state on lease expiration is known as a Courteous Server. A Courteous Server continues to recognize previously generated state tokens as valid until conflict arises between the expired state and the requests from another client, or the server reboots.
The v2 patch includes the following:
. add new callback,
lm_expire_lock, tolock_manager_operationsto allow the lock manager to take appropriate action with conflict lock.. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are waiters for client's locks.
. modify
client_info_showto show courtesy client and seconds from last renew.. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWNin the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.The v3 patch includes the following:
. modified
posix_test_lockto check and resolve conflict locks to handle NLM TEST and NFSv4 LOCKT requests.. separate out fix for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v4 patch includes:
. rework
nfsd_check_courtesyto avoid dead lock offl_lockandclient_lockby asking the laudromat thread to destroy the courtesy client.. handle NFSv4 share reservation conflicts with courtesy client. This includes conflicts between access mode and deny mode and vice versa.
. drop the patch for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v5 patch includes:
. fix recursive locking of
file_rwsemfromposix_lock_file.. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me.... I'll see if I can get some time today.--b.
Quoted 98 lines
Thanks,
-DaiQuoted 93 lines · On 10/1/21 2:41 PM, [email protected] wrote:
Quoted 7 lines · J. Bruce Fields
Quoted 3 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
It's weird, this test passes on my system:
[root@nfsvmf25 nfs4.0]# ./testserver.py $server --rundeps -v OPEN18 INIT st_setclientid.testValid : RUNNING
INIT st_setclientid.testValid : PASS
MKFILE st_open.testOpen : RUNNING
MKFILE st_open.testOpen : PASS
OPEN18 st_open.testShareConflict1 : RUNNING
OPEN18 st_open.testShareConflict1 : PASS
**************************************************
INIT st_setclientid.testValid : PASS
OPEN18 st_open.testShareConflict1 : PASS
MKFILE st_open.testOpen : PASS
**************************************************
Command line asked for 3 of 673 tests
Of those: 0 Skipped, 0 Failed, 0 Warned, 3 Passed [root@nfsvmf25 nfs4.0]#Do you have a network trace?
-Dai
Quoted 60 lines
--b.
Quoted 57 lines
A server which does not immediately expunge the state on lease expiration
is known as a Courteous Server. A Courteous Server continues to recognize
previously generated state tokens as valid until conflict arises between
the expired state and the requests from another client, or the server reboots.The v2 patch includes the following:
. add new callback,
lm_expire_lock, tolock_manager_operationsto allow the lock manager to take appropriate action with conflict lock.. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are waiters for client's locks.
. modify
client_info_showto show courtesy client and seconds from last renew.. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWNin the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.The v3 patch includes the following:
. modified
posix_test_lockto check and resolve conflict locks to handle NLM TEST and NFSv4 LOCKT requests.. separate out fix for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v4 patch includes:
. rework
nfsd_check_courtesyto avoid dead lock offl_lockandclient_lock
by asking the laudromat thread to destroy the courtesy client.. handle NFSv4 share reservation conflicts with courtesy client. This includes conflicts between access mode and deny mode and vice versa.
. drop the patch for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v5 patch includes:
. fix recursive locking of
file_rwsemfromposix_lock_file.. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
[email protected]
reviewerQuoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
-Dai
Quoted 96 lines
I'll see if I can get some time today.--b.
Quoted 94 lines
Thanks,
-DaiQuoted 90 lines · On 10/1/21 2:41 PM, [email protected] wrote:
Quoted 7 lines · J. Bruce Fields
Quoted 3 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
It's weird, this test passes on my system:
[root@nfsvmf25 nfs4.0]# ./testserver.py $server --rundeps -v OPEN18 INIT st_setclientid.testValid : RUNNING
INIT st_setclientid.testValid : PASS
MKFILE st_open.testOpen : RUNNING
MKFILE st_open.testOpen : PASS
OPEN18 st_open.testShareConflict1 : RUNNING
OPEN18 st_open.testShareConflict1 : PASS
**************************************************
INIT st_setclientid.testValid : PASS
OPEN18 st_open.testShareConflict1 : PASS
MKFILE st_open.testOpen : PASS
**************************************************
Command line asked for 3 of 673 tests
Of those: 0 Skipped, 0 Failed, 0 Warned, 3 Passed [root@nfsvmf25 nfs4.0]#Do you have a network trace?
-Dai
Quoted 59 lines
--b.
Quoted 57 lines
A server which does not immediately expunge the state on lease expiration
is known as a Courteous Server. A Courteous Server continues to recognize
previously generated state tokens as valid until conflict arises between
the expired state and the requests from another client, or the server reboots.The v2 patch includes the following:
. add new callback,
lm_expire_lock, tolock_manager_operationsto
allow the lock manager to take appropriate action with
conflict lock.. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are
waiters for client's locks.. modify
client_info_showto show courtesy client and seconds from
last renew.. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWNin the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.The v3 patch includes the following:
. modified
posix_test_lockto check and resolve conflict locks
to handle NLM TEST and NFSv4 LOCKT requests.. separate out fix for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v4 patch includes:
. rework
nfsd_check_courtesyto avoid dead lock offl_lockandclient_lock
by asking the laudromat thread to destroy the courtesy client.. handle NFSv4 share reservation conflicts with courtesy client. This
includes conflicts between access mode and deny mode and vice versa.. drop the patch for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v5 patch includes:
. fix recursive locking of
file_rwsemfromposix_lock_file.. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
[email protected]
reviewerQuoted 10 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself. I will look into this problem.
-Dai
Quoted 99 lines
-Dai
Quoted 96 lines
I'll see if I can get some time today.--b.
Quoted 94 lines
Thanks,
-DaiQuoted 90 lines · On 10/1/21 2:41 PM, [email protected] wrote:
Quoted 7 lines · J. Bruce Fields
Quoted 3 lines · Dai Ngo
Hi Bruce,
This series of patches implement the NFSv4 Courteous Server.
Apologies, I keep meaning to get back to this and haven't yet.
I do notice I'm seeing a timeout on pynfs 4.0 test OPEN18.
It's weird, this test passes on my system:
[root@nfsvmf25 nfs4.0]# ./testserver.py $server --rundeps -v OPEN18 INIT st_setclientid.testValid : RUNNING
INIT st_setclientid.testValid : PASS
MKFILE st_open.testOpen : RUNNING
MKFILE st_open.testOpen : PASS
OPEN18 st_open.testShareConflict1 : RUNNING
OPEN18 st_open.testShareConflict1 : PASS
**************************************************
INIT st_setclientid.testValid : PASS
OPEN18 st_open.testShareConflict1 : PASS
MKFILE st_open.testOpen : PASS
**************************************************
Command line asked for 3 of 673 tests
Of those: 0 Skipped, 0 Failed, 0 Warned, 3 Passed [root@nfsvmf25 nfs4.0]#Do you have a network trace?
-Dai
Quoted 59 lines
--b.
Quoted 57 lines
A server which does not immediately expunge the state on lease expiration
is known as a Courteous Server. A Courteous Server continues to recognize
previously generated state tokens as valid until conflict arises between
the expired state and the requests from another client, or the server reboots.The v2 patch includes the following:
. add new callback,
lm_expire_lock, tolock_manager_operationsto allow the lock manager to take appropriate action with conflict lock.. handle conflicts of NFSv4 locks with NFSv3/NLM and local locks.
. expire courtesy client after 24hr if client has not reconnected.
. do not allow expired client to become courtesy client if there are waiters for client's locks.
. modify
client_info_showto show courtesy client and seconds from last renew.. fix a problem with NFSv4.1 server where the it keeps returning
SEQ4_STATUS_CB_PATH_DOWNin the successful SEQUENCE reply, after the courtesy client re-connects, causing the client to keep sending BCTS requests to server.The v3 patch includes the following:
. modified
posix_test_lockto check and resolve conflict locks to handle NLM TEST and NFSv4 LOCKT requests.. separate out fix for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v4 patch includes:
. rework
nfsd_check_courtesyto avoid dead lock offl_lockandclient_lock
by asking the laudromat thread to destroy the courtesy client.. handle NFSv4 share reservation conflicts with courtesy client. This includes conflicts between access mode and deny mode and vice versa.
. drop the patch for back channel stuck in
SEQ4_STATUS_CB_PATH_DOWN.The v5 patch includes:
. fix recursive locking of
file_rwsemfromposix_lock_file.. retest with LOCKDEP enabled.
NOTE: I will submit pynfs tests for courteous server including tests for share reservation conflicts in a separate patch.
Quoted 20 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 10 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 8 lines
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
Quoted 1 line
I will look into this problem.
Thanks!
--b.
[email protected]
reviewerQuoted 17 lines · J. Bruce Fields
Quoted 16 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with OPEN4_SHARE_DENY_WRITE which causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.
I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
-Dai
Quoted 4 lines
Quoted 1 line
I will look into this problem.
Thanks!
--b.
[email protected]
reviewerHi Bruce,
Quoted 48 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 17 lines · J. Bruce Fields
Quoted 16 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.
Quoted 8 lines
I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
Thanks,
-Dai
Quoted 56 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 53 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
Quoted 7 lines
Quoted 4 lines
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is /var/lib/nfs/ on your server backed by a hard drive or an SSD or something else?
I wonder if that's an argument for limiting the number of courtesy clients.
--b.
[email protected]
reviewerQuoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?
My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 3 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it. Since there is no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.
We can reduce the courtesy_client_expiry time for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.
-Dai
Hello Dai!
Quoted 77 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 1 line
Quoted 6 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
When an NFSv4.0 client unmounts, all files should be closed at that point, so the server can wait for the lease to expire and purge it normally. Or am I missing something?
Quoted 7 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.
Quoted 7 lines
We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.-Dai
--
Chuck Lever
Quoted 87 lines · Chuck Lever III
Hello Dai!
Quoted 77 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 1 line
Quoted 6 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
Quoted 6 lines
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
When an NFSv4.0 client unmounts, all files should be closed at that point, so the server can wait for the lease to expire and purge it normally. Or am I missing something?
Makes sense to me!
Quoted 7 lines
Quoted 7 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.
Quoted 5 lines
Quoted 5 lines
We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.
I'm also totally fine with leaving out 4.0, at least to start.
--b.
[email protected]
reviewerQuoted 99 lines · Bruce Fields
Quoted 83 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
Quoted 6 lines
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
When an NFSv4.0 client unmounts, all files should be closed at that point, so the server can wait for the lease to expire and purge it normally. Or am I missing something?
Makes sense to me!
Quoted 7 lines
Quoted 7 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.
Quoted 6 lines
Quoted 5 lines
Quoted 5 lines
We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.I'm also totally fine with leaving out 4.0, at least to start.
Ok Bruce, I will submit v6 patch for this.
Thanks,
-Dai
Quoted 2 lines
--b.
[email protected]
reviewerQuoted 78 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
In this case, each client has opened files so there are open states associated with them.
Quoted 3 lines
When an NFSv4.0 client unmounts, all files should be closed at that point,
I'm not sure pynfs does proper clean up after each subtest, I will check. There must be state associated with the client in order for it to become courtesy client.
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated with the client then the server allows this client to become courtesy client.
-Dai
Quoted 21 lines
Quoted 9 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.Quoted 7 lines
We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.-Dai
--
Chuck Lever
[email protected]
reviewerQuoted 92 lines · On 11/29/21 11:36 AM, [email protected] wrote:
Quoted 78 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
In this case, each client has opened files so there are open states associated with them.
Quoted 1 line
Quoted 6 lines
Quoted 2 lines
When an NFSv4.0 client unmounts, all files should be closed at that point,
I'm not sure pynfs does proper clean up after each subtest, I will check. There must be state associated with the client in order for it to become courtesy client.
pynfs 4.0 test uses LOOKUP, OPEN with OPEN4_CREATE to create the test file and uses PUTFH and REMOVE to remove the test file when done. I don't see where the open state associated the removed file being freed by nfsd_remove. I guess for 4.0, the open state remains valid on the server until the client lease expires.
I attached the pcap of OPEN18 test for reference.
-Dai
Quoted 31 lines
Quoted 3 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated with the client then the server allows this client to become courtesy client.
-Dai
Quoted 21 lines
Quoted 16 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.-Dai
Signature · 1 line
Chuck Lever
Quoted 96 lines · Dai Ngo
Quoted 78 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
In this case, each client has opened files so there are open states associated with them.
Quoted 1 line
Quoted 6 lines
Quoted 2 lines
When an NFSv4.0 client unmounts, all files should be closed at that point,
I'm not sure pynfs does proper clean up after each subtest, I will check. There must be state associated with the client in order for it to become courtesy client.
Makes sense. Then a synthetic client like pynfs can DoS a courteous server.
Quoted 6 lines
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated with the client then the server allows this client to become courtesy client.
I think the same thing happens if an NFSv4.1 client neglects to send DESTROY_SESSION / DESTROY_CLIENTID. Either such a client is broken or malicious, but the server faces the same issue of protecting itself from a DoS attack.
IMO you should consider limiting the number of courteous clients the server can hold onto. Let's say that number is 1000. When the server wants to turn a 1001st client into a courteous client, it can simply expire and purge the oldest courteous client on its list. Otherwise, over time, the 24-hour expiry will reduce the set of courteous clients back to zero.
What do you think?
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.
Quoted 6 lines
Quoted 6 lines
Quoted 1 line
-Dai
--
Chuck Lever
--
Chuck Lever
[email protected]
reviewerQuoted 112 lines · Chuck Lever III
Quoted 90 lines · Dai Ngo
Quoted 78 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
Quoted 8 lines
In this case, each client has opened files so there are open states associated with them.
Quoted 2 lines
When an NFSv4.0 client unmounts, all files should be closed at that point,
I'm not sure pynfs does proper clean up after each subtest, I will check. There must be state associated with the client in order for it to become courtesy client.
Makes sense. Then a synthetic client like pynfs can DoS a courteous server.
Quoted 5 lines
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated with the client then the server allows this client to become courtesy client.
I think the same thing happens if an NFSv4.1 client neglects to send
DESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken or malicious, but the server faces the same issue of protecting itself from a DoS attack.
Quoted 8 lines
IMO you should consider limiting the number of courteous clients the server can hold onto. Let's say that number is 1000. When the server wants to turn a 1001st client into a courteous client, it can simply expire and purge the oldest courteous client on its list. Otherwise, over time, the 24-hour expiry will reduce the set of courteous clients back to zero.
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
I think if a malicious 4.1 clients could mount the server's export, opens a file (to create state) and repeats the same with a different client id then it seems like some basic security was already broken; allowing unauthorized clients to mount server's exports.
I think if we have to enforce a limit, then it's only for handling of seriously buggy 4.1 clients which should not be the norm. The issue with this is how to pick an optimal number that is suitable for the running server which can be a very slow or a very fast server.
Note that even if we impose an limit, that does not completely solve the problem with pynfs 4.0 test since its RPC timeout is configured with 15 secs which just enough to expire 277 clients based on 53ms for each client, unless we limit it ~270 clients which I think it's too low.
This is what I plan to do:
1. do not support 4.0 courteous clients, for sure.
2. limit the number of courteous clients to 1000 (?), if you still think we need it.
Pls let me know what you think.
Thanks,
-Dai
Quoted 26 lines
Quoted 15 lines
Quoted 15 lines
Quoted 15 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.Quoted 6 lines
Quoted 6 lines
Quoted 1 line
-Dai
--
Chuck Lever--
Chuck Lever
Quoted 126 lines · Dai Ngo
Quoted 113 lines · Chuck Lever III
Quoted 90 lines
Quoted 2 lines · Dai Ngo
Quoted 78 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
Quoted 1 line · On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs failure for me....
Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
Quoted 8 lines
In this case, each client has opened files so there are open states associated with them.
Quoted 2 lines
When an NFSv4.0 client unmounts, all files should be closed at that point,
I'm not sure pynfs does proper clean up after each subtest, I will check. There must be state associated with the client in order for it to become courtesy client.
Makes sense. Then a synthetic client like pynfs can DoS a courteous server.
Quoted 5 lines
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated with the client then the server allows this client to become courtesy client.
I think the same thing happens if an NFSv4.1 client neglects to send
DESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken or malicious, but the server faces the same issue of protecting itself from a DoS attack.Quoted 8 lines
IMO you should consider limiting the number of courteous clients the server can hold onto. Let's say that number is 1000. When the server wants to turn a 1001st client into a courteous client, it can simply expire and purge the oldest courteous client on its list. Otherwise, over time, the 24-hour expiry will reduce the set of courteous clients back to zero.
What do you think?
Quoted 7 lines
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
I think if a malicious 4.1 clients could mount the server's export, opens a file (to create state) and repeats the same with a different client id then it seems like some basic security was already broken; allowing unauthorized clients to mount server's exports.
You can do this today with AUTH_SYS. I consider it a genuine attack surface.
Quoted 11 lines
I think if we have to enforce a limit, then it's only for handling of seriously buggy 4.1 clients which should not be the norm. The issue with this is how to pick an optimal number that is suitable for the running server which can be a very slow or a very fast server.
Note that even if we impose an limit, that does not completely solve the problem with pynfs 4.0 test since its RPC timeout is configured with 15 secs which just enough to expire 277 clients based on 53ms for each client, unless we limit it ~270 clients which I think it's too low.
Quoted 3 lines
This is what I plan to do:
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I think it needs to include a plan for how 4.0 will be added later.
Quoted 2 lines
2. limit the number of courteous clients to 1000 (?), if you still think we need it.
I think this limit is necessary. It can be set based on the server’s physical memory size if a dynamic limit is desired.
Quoted 31 lines
Pls let me know what you think.
Thanks,
-DaiQuoted 26 lines
Quoted 15 lines
Quoted 15 lines
Quoted 15 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.Quoted 6 lines
Quoted 6 lines
Quoted 1 line
-Dai
--
Chuck Lever--
Chuck Lever
Quoted 207 lines · Chuck Lever III
Quoted 181 lines · Dai Ngo
Quoted 165 lines · Chuck Lever III
Quoted 137 lines
Quoted 3 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo <[email protected]> wrote:
Quoted 119 lines · Chuck Lever III
Hello Dai!
Quoted 116 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo <[email protected]> wrote:
Quoted 95 lines · J. Bruce Fields
Quoted 84 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 81 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 30 lines · J. Bruce Fields
Quoted 28 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 5 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
On Tue, Nov 16, 2021 at 03:06:32PM -0800,
[email protected] wrote:
Just a reminder that this patch is still
waiting for your review.Quoted 8 lines
Quoted 3 lines
Yeah, I was procrastinating and hoping yo'ud
figure out the pynfs
failure for me....Last time I ran 4.0 OPEN18 test by itself and
it passed. I will run
all OPEN tests together with 5.15-rc7 to see if
the problem you've
seen still there.I ran all tests in nfsv4.1 and nfsv4.0 with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both courteous
and
non-courteous server:Quoted 2 lines
Of those: 0 Skipped, 0 Failed, 0 Warned, 169
PassedResults of nfs4.0 with non-courteous server:
Quoted 2 lines
Of those: 8 Skipped, 1 Failed, 0 Warned, 577
Passedtest failed: LOCK24
Quoted 8 lines
Quoted 7 lines
Results of nfs4.0 with courteous server:
Quoted 2 lines
Of those: 8 Skipped, 3 Failed, 0 Warned, 575
Passedtests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by
itself.Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for
the reply of an OPEN call. The RPC connection used for the test was
configured with 15 secs timeout. Note that OPEN18 only fails when
the tests were run with 'all' option, this test passes if it's run
by itself.With courteous server, by the time OPEN18 runs, there are about 1026
courtesy 4.0 clients on the server and all of these clients have opened
the same file X with WRITE access. These clients were created by the
previous tests. After each test completed, since 4.0 does not have
session, the client states are not cleaned up immediately on the
server and are allowed to become courtesy clients.When OPEN18 runs (about 20 minutes after the 1st test started), it
sends OPEN of file X withOPEN4_SHARE_DENY_WRITEwhich causes the
server to check for conflicts with courtesy clients. The loop that
checks 1026 courtesy clients for share/access conflict took less
than 1 sec. But it took about 55 secs, on my VM, for the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds
timeout and OPEN18 now consistently passed. The 4.0 test results are
now the same for courteous and non-courteous server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 7 lines
Quoted 4 lines
Note that 4.1 tests do not suffer this timeout problem because the
4.1 clients and sessions are destroyed after each test completes.Do you want me to send the patch to increase the timeout for pynfs?
or is there any other things you think we should do?I don't know.
Quoted 7 lines
55 seconds to clean up 1026 clients is about 50ms per client, which is
pretty slow. I wonder why. I guess it's probably updating the stable
storage information. Is/var/lib/nfs/on your server backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard
disk. I think a production system that supports this many clients should
have faster CPUs, faster storage.Quoted 3 lines
I wonder if that's an argument for limiting the number of courtesy
clients.Quoted 8 lines
Quoted 5 lines
I think we might want to treat 4.0 clients a bit different from 4.1
clients. With 4.0, every client will become a courtesy client after
the client is done with the export and unmounts it.It should be safe for a server to purge a client's lease immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open states
associated with them.Quoted 8 lines
Quoted 3 lines
When an NFSv4.0 client unmounts, all files should be closed at that
point,I'm not sure pynfs does proper clean up after each subtest, I will
check. There must be state associated with the client in order for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 7 lines
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated
with the client then the server allows this client to become courtesy
client.I think the same thing happens if an NFSv4.1 client neglects to send
DESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken
or malicious, but the server faces the same issue of protecting itself from a DoS attack.Quoted 8 lines
IMO you should consider limiting the number of courteous clients the server can hold onto. Let's say that number is 1000. When the server wants to turn a 1001st client into a courteous client, it can simply expire and purge the oldest courteous client on its list. Otherwise, over time, the 24-hour expiry will reduce the set of courteous clients back to zero.
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
Quoted 6 lines
I think if a malicious 4.1 clients could mount the server's export, opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack surface.Quoted 15 lines
I think if we have to enforce a limit, then it's only for handling of seriously buggy 4.1 clients which should not be the norm. The issue with this is how to pick an optimal number that is suitable for the running server which can be a very slow or a very fast server.
Note that even if we impose an limit, that does not completely solve
the problem with pynfs 4.0 test since its RPC timeout is configured with 15 secs which just enough to expire 277 clients based on 53ms for each client, unless we limit it ~270 clients which I think it's too low.This is what I plan to do:
Quoted 10 lines
Quoted 1 line
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I think it needs to include a plan for how 4.0 will be added later.
Quoted 1 line
Why is there a problem here? The requirements are the same for 4.0 and 4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released if some other client requests a lock that conflicts with the cached lock (unless the client breaks the courtesy framework by renewing that original lease before the conflict occurs). Otherwise, it is completely up to the server when it decides to actually release the lock.
For NFSv4.1 and NFSv4.2, we have DESTROY_CLIENTID, which tells the server when the client is actually done with the lease, making it easy to determine when it is safe to release all the courtesy locks. However if the client does not send DESTROY_CLIENTID, then we're in the same situation with 4.x (x>0) as we would be with bog standard NFSv4.0. The lease has expired, and so the courtesy locks are liable to being dropped.
At Hammerspace we have implemented courtesy locks, and our strategy is that when a conflict occurs, we drop the entire set of courtesy locks so that we don't have to deal with the "some locks were revoked" scenario. The reason is that when we originally implemented courtesy locks, the Linux NFSv4 client support for lock revocation was a lot less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the support to make revocation more nuanced once you are confident that the coarser strategy is working as expected.
Signature · 3 lines
Trond Myklebust Linux NFS client maintainer, Hammerspace [email protected]
Quoted 230 lines · Trond Myklebust
Quoted 207 lines · Chuck Lever III
Quoted 181 lines
Quoted 2 lines · Dai Ngo
Quoted 165 lines · Chuck Lever III
Quoted 137 lines
Quoted 3 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo <[email protected]> wrote:
Quoted 119 lines · Chuck Lever III
Hello Dai!
Quoted 116 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo <[email protected]> wrote:
Quoted 95 lines · J. Bruce Fields
Quoted 84 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 81 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 30 lines · J. Bruce Fields
Quoted 28 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 13 lines · On 11/17/21 9:59 AM, [email protected] wrote:
On 11/17/21 6:14 AM, J. Bruce Fields wrote:
On Tue, Nov 16, 2021 at 03:06:32PM -0800,
[email protected] wrote:
Just a reminder that this patch is still
waiting for your review.
Yeah, I was procrastinating and hoping yo'ud
figure out the pynfs
failure for me....
Last time I ran 4.0 OPEN18 test by itself and
it passed. I will run
all OPEN tests together with 5.15-rc7 to see if
the problem you've
seen still there.I ran all tests in nfsv4.1 and nfsv4.0 with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both courteous
and
non-courteous server:Quoted 2 lines
Of those: 0 Skipped, 0 Failed, 0 Warned, 169
PassedResults of nfs4.0 with non-courteous server:
Quoted 2 lines
Of those: 8 Skipped, 1 Failed, 0 Warned, 577
Passedtest failed: LOCK24
Quoted 8 lines
Quoted 7 lines
Results of nfs4.0 with courteous server:
Quoted 2 lines
Of those: 8 Skipped, 3 Failed, 0 Warned, 575
Passedtests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by
itself.Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for
the reply of an OPEN call. The RPC connection used for the test was
configured with 15 secs timeout. Note that OPEN18 only fails when
the tests were run with 'all' option, this test passes if it's run
by itself.With courteous server, by the time OPEN18 runs, there are about 1026
courtesy 4.0 clients on the server and all of these clients have opened
the same file X with WRITE access. These clients were created by the
previous tests. After each test completed, since 4.0 does not have
session, the client states are not cleaned up immediately on the
server and are allowed to become courtesy clients.When OPEN18 runs (about 20 minutes after the 1st test started), it
sends OPEN of file X withOPEN4_SHARE_DENY_WRITEwhich causes the
server to check for conflicts with courtesy clients. The loop that
checks 1026 courtesy clients for share/access conflict took less
than 1 sec. But it took about 55 secs, on my VM, for the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds
timeout and OPEN18 now consistently passed. The 4.0 test results are
now the same for courteous and non-courteous server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 7 lines
Quoted 4 lines
Note that 4.1 tests do not suffer this timeout problem because the
4.1 clients and sessions are destroyed after each test completes.Do you want me to send the patch to increase the timeout for pynfs?
or is there any other things you think we should do?I don't know.
Quoted 7 lines
55 seconds to clean up 1026 clients is about 50ms per client, which is
pretty slow. I wonder why. I guess it's probably updating the stable
storage information. Is/var/lib/nfs/on your server backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard
disk. I think a production system that supports this many clients should
have faster CPUs, faster storage.Quoted 3 lines
I wonder if that's an argument for limiting the number of courtesy
clients.Quoted 8 lines
Quoted 5 lines
I think we might want to treat 4.0 clients a bit different from 4.1
clients. With 4.0, every client will become a courtesy client after
the client is done with the export and unmounts it.It should be safe for a server to purge a client's lease immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open states
associated with them.Quoted 8 lines
Quoted 3 lines
When an NFSv4.0 client unmounts, all files should be closed at that
point,I'm not sure pynfs does proper clean up after each subtest, I will
check. There must be state associated with the client in order for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 7 lines
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated
with the client then the server allows this client to become courtesy
client.I think the same thing happens if an NFSv4.1 client neglects to send
DESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken
or malicious, but the server faces the same issue of protecting itself from a DoS attack.Quoted 8 lines
IMO you should consider limiting the number of courteous clients the server can hold onto. Let's say that number is 1000. When the server wants to turn a 1001st client into a courteous client, it can simply expire and purge the oldest courteous client on its list. Otherwise, over time, the 24-hour expiry will reduce the set of courteous clients back to zero.
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
Quoted 6 lines
I think if a malicious 4.1 clients could mount the server's export, opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack surface.Quoted 15 lines
I think if we have to enforce a limit, then it's only for handling of seriously buggy 4.1 clients which should not be the norm. The issue with this is how to pick an optimal number that is suitable for the running server which can be a very slow or a very fast server.
Note that even if we impose an limit, that does not completely solve
the problem with pynfs 4.0 test since its RPC timeout is configured with 15 secs which just enough to expire 277 clients based on 53ms for each client, unless we limit it ~270 clients which I think it's too low.This is what I plan to do:
Quoted 10 lines
Quoted 1 line
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I think it needs to include a plan for how 4.0 will be added later.
Quoted 1 line
Why is there a problem here? The requirements are the same for 4.0 and 4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released if some other client requests a lock that conflicts with the cached lock (unless the client breaks the courtesy framework by renewing that original lease before the conflict occurs). Otherwise, it is completely up to the server when it decides to actually release the lock.
Quoted 7 lines
For NFSv4.1 and NFSv4.2, we have
DESTROY_CLIENTID, which tells the server when the client is actually done with the lease, making it easy to determine when it is safe to release all the courtesy locks. However if the client does not sendDESTROY_CLIENTID, then we're in the same situation with 4.x (x>0) as we would be with bog standard NFSv4.0. The lease has expired, and so the courtesy locks are liable to being dropped.
I agree the situation is the same for all minor versions.
Quoted 9 lines
At Hammerspace we have implemented courtesy locks, and our strategy is that when a conflict occurs, we drop the entire set of courtesy locks so that we don't have to deal with the "some locks were revoked" scenario. The reason is that when we originally implemented courtesy locks, the Linux NFSv4 client support for lock revocation was a lot less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the support to make revocation more nuanced once you are confident that the coarser strategy is working as expected.
Dai’s implementation does all that, and takes the coarser approach at the moment. There are plans to explore the more nuanced behavior (by revoking only the conflicting lock instead of dropping the whole lease) after this initial work is merged.
The issue is there are certain pathological client behaviors (whether malicious or accidental) that can run the server out of resources, since it is holding onto lease state for a much longer time. We are simply trying to design a lease garbage collection scheme to meet that challenge.
I think limiting the number of courteous clients is a simple way to do this, but we could also shorten the courtesy lifetime as more clients enter that state, to ensure that they don’t overrun the server’s memory. Another approach might be to add a shrinker that purges the oldest courteous clients when the server comes under memory pressure.
Quoted 327 lines · Chuck Lever III
Quoted 287 lines
On Nov 29, 2021, at 11:08 PM, Trond Myklebust
<[email protected]> wrote:Quoted 260 lines · Chuck Lever III
Quoted 224 lines
Quoted 3 lines
On Nov 29, 2021, at 7:11 PM, Dai Ngo <[email protected]> wrote:
Quoted 213 lines · Chuck Lever III
Quoted 170 lines
Quoted 3 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo <[email protected]> wrote:
Quoted 152 lines · Chuck Lever III
Hello Dai!
Quoted 143 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo
<[email protected]>
wrote:Quoted 118 lines · J. Bruce Fields
Quoted 106 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 103 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 39 lines · J. Bruce Fields
Quoted 37 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
On 11/17/21 9:59 AM,
[email protected] wrote:
On 11/17/21 6:14 AM, J. Bruce Fields wrote:
On Tue, Nov 16, 2021 at 03:06:32PM -0800,
[email protected] wrote:
Just a reminder that this patch is
still
waiting for your review.
Yeah, I was procrastinating and hoping
yo'ud
figure out the pynfs
failure for me....
Last time I ran 4.0 OPEN18 test by itself
and
it passed. I will run
all OPEN tests together with 5.15-rc7 to
see if
the problem you've
seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both
courteous
and
non-courteous server:
Of those: 0 Skipped, 0 Failed, 0 Warned,
169
Passed
Results of nfs4.0 with non-courteous server:
Of those: 8 Skipped, 1 Failed, 0 Warned,
577
Passed
test failed: LOCK24Results of nfs4.0 with courteous server:
Quoted 8 lines
Quoted 7 lines
Of those: 8 Skipped, 3 Failed, 0 Warned,
575
Passed
tests failed: LOCK24, OPEN18, OPEN30OPEN18 and OPEN30 test pass if each is run by
itself.Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test
timed
out waiting for
the reply of an OPEN call. The RPC connection
used
for the test was
configured with 15 secs timeout. Note that OPEN18
only fails when
the tests were run with 'all' option, this test
passes if it's run
by itself.With courteous server, by the time OPEN18 runs,
there
are about 1026
courtesy 4.0 clients on the server and all of
these
clients have opened
the same file X with WRITE access. These clients
were
created by the
previous tests. After each test completed, since
4.0
does not have
session, the client states are not cleaned up
immediately on the
server and are allowed to become courtesy
clients.When OPEN18 runs (about 20 minutes after the 1st
test
started), it
sends OPEN of file X withOPEN4_SHARE_DENY_WRITE
which causes the
server to check for conflicts with courtesy
clients.
The loop that
checks 1026 courtesy clients for share/access
conflict took less
than 1 sec. But it took about 55 secs, on my VM,
for
the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC
connection
with 60 seconds
timeout and OPEN18 now consistently passed. The
4.0
test results are
now the same for courteous and non-courteous
server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 4 lines
Note that 4.1 tests do not suffer this timeout
problem because the
4.1 clients and sessions are destroyed after each
test completes.Do you want me to send the patch to increase the
timeout for pynfs?
or is there any other things you think we should
do?I don't know.
Quoted 7 lines
55 seconds to clean up 1026 clients is about 50ms per client, which is
pretty slow. I wonder why. I guess it's probably updating the stable
storage information. Is/var/lib/nfs/on your server backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and
64GB of hard
disk. I think a production system that supports this many
clients should
have faster CPUs, faster storage.Quoted 4 lines
I wonder if that's an argument for limiting the
number of
courtesy
clients.Quoted 6 lines
I think we might want to treat 4.0 clients a bit different
from 4.1
clients. With 4.0, every client will become a courtesy client after
the client is done with the export and unmounts it.Quoted 3 lines
It should be safe for a server to purge a client's lease immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open
states
associated with them.Quoted 4 lines
When an NFSv4.0 client unmounts, all files should be closed
at that
point,Quoted 7 lines
I'm not sure pynfs does proper clean up after each subtest, I
will
check. There must be state associated with the client in order
for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 9 lines
Quoted 3 lines
so the server can wait for the lease to expire and purge it
normally. Or am I missing something?When 4.0 client lease expires and there are still states associated
with the client then the server allows this client to become
courtesy
client.I think the same thing happens if an NFSv4.1 client neglects to
sendDESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken
or malicious, but the server faces the same issue of protecting
itself from a DoS attack.IMO you should consider limiting the number of courteous clients
the server can hold onto. Let's say that number is 1000. When the
server wants to turn a 1001st client into a courteous client, it
can simply expire and purge the oldest courteous client on its
list. Otherwise, over time, the 24-hour expiry will reduce the
set of courteous clients back to zero.Quoted 1 line
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
Quoted 7 lines
I think if a malicious 4.1 clients could mount the server's export,
opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack
surface.Quoted 19 lines
I think if we have to enforce a limit, then it's only for handling
of seriously buggy 4.1 clients which should not be the norm. The
issue with this is how to pick an optimal number that is suitable
for the running server which can be a very slow or a very fast server.Note that even if we impose an limit, that does not completely solve
the problem with pynfs 4.0 test since its RPC timeout is configured
with 15 secs which just enough to expire 277 clients based on 53ms
for each client, unless we limit it ~270 clients which I think it's
too low.Quoted 3 lines
This is what I plan to do:
1. do not support 4.0 courteous clients, for sure.
Quoted 9 lines
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I
think it needs to include a plan for how 4.0 will be added later.Quoted 1 line
Why is there a problem here? The requirements are the same for 4.0 and
4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released if
some other client requests a lock that conflicts with the cached lock
(unless the client breaks the courtesy framework by renewing that original lease before the conflict occurs). Otherwise, it is completely
up to the server when it decides to actually release the lock.Quoted 11 lines
For NFSv4.1 and NFSv4.2, we have
DESTROY_CLIENTID, which tells the server when the client is actually done with the lease, making it easy
to determine when it is safe to release all the courtesy locks. However
if the client does not sendDESTROY_CLIENTID, then we're in the same
situation with 4.x (x>0) as we would be with bog standard NFSv4.0. The
lease has expired, and so the courtesy locks are liable to being dropped.I agree the situation is the same for all minor versions.
Quoted 5 lines
At Hammerspace we have implemented courtesy locks, and our strategy is
that when a conflict occurs, we drop the entire set of courtesy locks
so that we don't have to deal with the "some locks were revoked"Quoted 8 lines
scenario. The reason is that when we originally implemented courtesy
locks, the Linux NFSv4 client support for lock revocation was a lot less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the support to make revocation more nuanced once you are confident that the
coarser strategy is working as expected.Dai’s implementation does all that, and takes the coarser approach at the moment. There are plans to explore the more nuanced behavior (by revoking only the conflicting lock instead of dropping the whole lease) after this initial work is merged.
The issue is there are certain pathological client behaviors (whether malicious or accidental) that can run the server out of resources, since it is holding onto lease state for a much longer time. We are simply trying to design a lease garbage collection scheme to meet that challenge.
Quoted 8 lines
I think limiting the number of courteous clients is a simple way to do this, but we could also shorten the courtesy lifetime as more clients enter that state, to ensure that they don’t overrun the server’s memory. Another approach might be to add a shrinker that purges the oldest courteous clients when the server comes under memory pressure.
We already have a scanner that tries to release all client state after 1 lease period. Just extend that to do it after 10 lease periods. If a network partition hasn't recovered after 10 minutes, you probably have bigger problems.
You can limit the number of clients as well, but that leads into a rats nest of other issues that have nothing to do with courtesy locks and everything to do with the fact that any client can hold a lot of state.
Signature · 3 lines
Trond Myklebust Linux NFS client maintainer, Hammerspace [email protected]
[email protected]
reviewerQuoted 325 lines · Trond Myklebust
Quoted 316 lines · Chuck Lever III
Quoted 278 lines
On Nov 29, 2021, at 11:08 PM, Trond Myklebust
<[email protected]> wrote:Quoted 253 lines · Chuck Lever III
Quoted 220 lines
Quoted 2 lines
On Nov 29, 2021, at 7:11 PM, Dai Ngo <[email protected]> wrote:
Quoted 212 lines · Chuck Lever III
Quoted 169 lines
Quoted 3 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo <[email protected]> wrote:
Quoted 152 lines · Chuck Lever III
Hello Dai!
Quoted 143 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo
<[email protected]>
wrote:Quoted 118 lines · J. Bruce Fields
Quoted 106 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 103 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 47 lines · J. Bruce Fields
On Wed, Nov 17, 2021 at 01:46:02PM -0800,
[email protected] wrote:
On 11/17/21 9:59 AM,
[email protected] wrote:
On 11/17/21 6:14 AM, J. Bruce Fields wrote:
On Tue, Nov 16, 2021 at 03:06:32PM -0800,
[email protected] wrote:
Just a reminder that this patch is
still
waiting for your review.
Yeah, I was procrastinating and hoping
yo'ud
figure out the pynfs
failure for me....
Last time I ran 4.0 OPEN18 test by itself
and
it passed. I will run
all OPEN tests together with 5.15-rc7 to
see if
the problem you've
seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both
courteous
and
non-courteous server:
Of those: 0 Skipped, 0 Failed, 0 Warned,
169
Passed
Results of nfs4.0 with non-courteous server:
Of those: 8 Skipped, 1 Failed, 0 Warned,
577
Passed
test failed: LOCK24Results of nfs4.0 with courteous server:
Of those: 8 Skipped, 3 Failed, 0 Warned,
575
Passed
tests failed: LOCK24, OPEN18, OPEN30OPEN18 and OPEN30 test pass if each is run by
itself.
Could well be a bug in the tests, I don't know.The reason OPEN18 failed was because the test
timed
out waiting for
the reply of an OPEN call. The RPC connection
used
for the test was
configured with 15 secs timeout. Note that OPEN18
only fails when
the tests were run with 'all' option, this test
passes if it's run
by itself.With courteous server, by the time OPEN18 runs,
there
are about 1026
courtesy 4.0 clients on the server and all of
these
clients have opened
the same file X with WRITE access. These clients
were
created by the
previous tests. After each test completed, since
4.0
does not have
session, the client states are not cleaned up
immediately on the
server and are allowed to become courtesy
clients.When OPEN18 runs (about 20 minutes after the 1st
test
started), it
sends OPEN of file X withOPEN4_SHARE_DENY_WRITE
which causes the
server to check for conflicts with courtesy
clients.
The loop that
checks 1026 courtesy clients for share/access
conflict took less
than 1 sec. But it took about 55 secs, on my VM,
for
the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC
connection
with 60 seconds
timeout and OPEN18 now consistently passed. The
4.0
test results are
now the same for courteous and non-courteous
server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 4 lines
Note that 4.1 tests do not suffer this timeout
problem because the
4.1 clients and sessions are destroyed after each
test completes.Do you want me to send the patch to increase the
timeout for pynfs?
or is there any other things you think we should
do?I don't know.
Quoted 7 lines
55 seconds to clean up 1026 clients is about 50ms per client, which is
pretty slow. I wonder why. I guess it's probably updating the stable
storage information. Is/var/lib/nfs/on your server backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and
64GB of hard
disk. I think a production system that supports this many
clients should
have faster CPUs, faster storage.Quoted 4 lines
I wonder if that's an argument for limiting the
number of
courtesy
clients.Quoted 6 lines
I think we might want to treat 4.0 clients a bit different
from 4.1
clients. With 4.0, every client will become a courtesy client after
the client is done with the export and unmounts it.Quoted 3 lines
It should be safe for a server to purge a client's lease immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open
states
associated with them.Quoted 4 lines
When an NFSv4.0 client unmounts, all files should be closed
at that
point,Quoted 7 lines
I'm not sure pynfs does proper clean up after each subtest, I
will
check. There must be state associated with the client in order
for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 9 lines
Quoted 3 lines
so the server can wait for the lease to expire and purge it
normally. Or am I missing something?When 4.0 client lease expires and there are still states associated
with the client then the server allows this client to become
courtesy
client.I think the same thing happens if an NFSv4.1 client neglects to
sendDESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken
or malicious, but the server faces the same issue of protecting
itself from a DoS attack.IMO you should consider limiting the number of courteous clients
the server can hold onto. Let's say that number is 1000. When the
server wants to turn a 1001st client into a courteous client, it
can simply expire and purge the oldest courteous client on its
list. Otherwise, over time, the 24-hour expiry will reduce the
set of courteous clients back to zero.Quoted 1 line
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
Quoted 7 lines
I think if a malicious 4.1 clients could mount the server's export,
opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack
surface.Quoted 21 lines
I think if we have to enforce a limit, then it's only for handling
of seriously buggy 4.1 clients which should not be the norm. The
issue with this is how to pick an optimal number that is suitable
for the running server which can be a very slow or a very fast server.Note that even if we impose an limit, that does not completely solve
the problem with pynfs 4.0 test since its RPC timeout is configured
with 15 secs which just enough to expire 277 clients based on 53ms
for each client, unless we limit it ~270 clients which I think it's
too low.This is what I plan to do:
Quoted 9 lines
Quoted 1 line
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I
think it needs to include a plan for how 4.0 will be added later.Why is there a problem here? The requirements are the same for 4.0 and
4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released if
some other client requests a lock that conflicts with the cached lock
(unless the client breaks the courtesy framework by renewing that original lease before the conflict occurs). Otherwise, it is completely
up to the server when it decides to actually release the lock.Quoted 11 lines
For NFSv4.1 and NFSv4.2, we have
DESTROY_CLIENTID, which tells the server when the client is actually done with the lease, making it easy
to determine when it is safe to release all the courtesy locks. However
if the client does not sendDESTROY_CLIENTID, then we're in the same
situation with 4.x (x>0) as we would be with bog standard NFSv4.0. The
lease has expired, and so the courtesy locks are liable to being dropped.I agree the situation is the same for all minor versions.
Quoted 5 lines
At Hammerspace we have implemented courtesy locks, and our strategy is
that when a conflict occurs, we drop the entire set of courtesy locks
so that we don't have to deal with the "some locks were revoked"Quoted 8 lines
scenario. The reason is that when we originally implemented courtesy
locks, the Linux NFSv4 client support for lock revocation was a lot less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the support to make revocation more nuanced once you are confident that the
coarser strategy is working as expected.Dai’s implementation does all that, and takes the coarser approach at the moment. There are plans to explore the more nuanced behavior (by revoking only the conflicting lock instead of dropping the whole lease) after this initial work is merged.
The issue is there are certain pathological client behaviors (whether malicious or accidental) that can run the server out of resources, since it is holding onto lease state for a much longer time. We are simply trying to design a lease garbage collection scheme to meet that challenge.
Quoted 8 lines
I think limiting the number of courteous clients is a simple way to do this, but we could also shorten the courtesy lifetime as more clients enter that state, to ensure that they don’t overrun the server’s memory. Another approach might be to add a shrinker that purges the oldest courteous clients when the server comes under memory pressure.
Quoted 4 lines
We already have a scanner that tries to release all client state after 1 lease period. Just extend that to do it after 10 lease periods. If a network partition hasn't recovered after 10 minutes, you probably have bigger problems.
Currently the courteous server allows 24hr for the network partition to heal before releasing all client state. That seems to be excessive but it was suggested for longer network partition conditions when switch/routers being repaired/upgraded.
Quoted 4 lines
You can limit the number of clients as well, but that leads into a rats nest of other issues that have nothing to do with courtesy locks and everything to do with the fact that any client can hold a lot of state.
The issue we currently have with courteous server and pynfs 4.0 tests is the number of courteous 4.0 clients the server has to expire when a share reservation conflict occurs when servicing the OPEN. Each client owns only few state in this case so we think the server spent most time for deleting client's record in /var/lib/nfs. This is why we plan to limit the number of courteous clients for now. As a side effect, it might also help to reduce resource consumption too.
-Dai
Quoted 1 line
Quoted 424 lines · On Mon, 2021-11-29 at 23:22 -0800, [email protected] wrote:
Quoted 398 lines · Trond Myklebust
Quoted 388 lines · Chuck Lever III
Quoted 336 lines
On Nov 29, 2021, at 11:08 PM, Trond Myklebust
<[email protected]> wrote:Quoted 310 lines · Chuck Lever III
Quoted 264 lines
Quoted 2 lines
On Nov 29, 2021, at 7:11 PM, Dai Ngo <[email protected]> wrote:
Quoted 255 lines · Chuck Lever III
Quoted 202 lines
Quoted 4 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo
<[email protected]>
wrote:Quoted 183 lines · Chuck Lever III
Hello Dai!
Quoted 173 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo
<[email protected]>
wrote:Quoted 143 lines · J. Bruce Fields
Quoted 133 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 130 lines · On 11/21/21 7:04 PM, [email protected] wrote:
On 11/17/21 4:34 PM, J. Bruce Fields wrote:
On Wed, Nov 17, 2021 at 01:46:02PM -0800,
[email protected] wrote:
On 11/17/21 9:59 AM,
[email protected] wrote:
On 11/17/21 6:14 AM, J. Bruce Fields
wrote:
On Tue, Nov 16, 2021 at 03:06:32PM -
0800,
[email protected] wrote:
Just a reminder that this patch is
still
waiting for your review.
Yeah, I was procrastinating and
hoping
yo'ud
figure out the pynfs
failure for me....
Last time I ran 4.0 OPEN18 test by
itself
and
it passed. I will run
all OPEN tests together with 5.15-rc7
to
see if
the problem you've
seen still there.
I ran all tests in nfsv4.1 and nfsv4.0
with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both
courteous
and
non-courteous server:
Of those: 0 Skipped, 0 Failed, 0
Warned,
169
Passed
Results of nfs4.0 with non-courteous
server:
Of those: 8 Skipped, 1 Failed, 0
Warned,
577
Passed
test failed: LOCK24Results of nfs4.0 with courteous server:
Of those: 8 Skipped, 3 Failed, 0
Warned,
575
Passed
tests failed: LOCK24, OPEN18, OPEN30OPEN18 and OPEN30 test pass if each is
run by
itself.
Could well be a bug in the tests, I don't
know.
The reason OPEN18 failed was because the test
timed
out waiting for
the reply of an OPEN call. The RPC connection
used
for the test was
configured with 15 secs timeout. Note that
OPEN18
only fails when
the tests were run with 'all' option, this
test
passes if it's run
by itself.With courteous server, by the time OPEN18
runs,
there
are about 1026
courtesy 4.0 clients on the server and all of
these
clients have opened
the same file X with WRITE access. These
clients
were
created by the
previous tests. After each test completed,
since
4.0
does not have
session, the client states are not cleaned up
immediately on the
server and are allowed to become courtesy
clients.When OPEN18 runs (about 20 minutes after the
1st
test
started), it
sends OPEN of file X with
OPEN4_SHARE_DENY_WRITE
which causes the
server to check for conflicts with courtesy
clients.
The loop that
checks 1026 courtesy clients for share/access
conflict took less
than 1 sec. But it took about 55 secs, on my
VM,
for
the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC
connection
with 60 seconds
timeout and OPEN18 now consistently passed.
The
4.0
test results are
now the same for courteous and non-courteous
server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this
timeout
problem because the
4.1 clients and sessions are destroyed after
each
test completes.Quoted 6 lines
Do you want me to send the patch to increase
the
timeout for pynfs?
or is there any other things you think we
should
do?I don't know.
Quoted 10 lines
55 seconds to clean up 1026 clients is about 50ms
per
client, which is
pretty slow. I wonder why. I guess it's
probably
updating the stable
storage information. Is/var/lib/nfs/on your
server
backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB
RAM
and
64GB of hard
disk. I think a production system that supports
this
many
clients should
have faster CPUs, faster storage.Quoted 4 lines
I wonder if that's an argument for limiting the
number of
courtesy
clients.Quoted 7 lines
I think we might want to treat 4.0 clients a bit different
from 4.1
clients. With 4.0, every client will become a courtesy
client after
the client is done with the export and unmounts it.Quoted 4 lines
It should be safe for a server to purge a client's lease
immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open
states
associated with them.Quoted 4 lines
When an NFSv4.0 client unmounts, all files should be closed
at that
point,Quoted 9 lines
I'm not sure pynfs does proper clean up after each subtest,
I
will
check. There must be state associated with the client in
order
for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 11 lines
Quoted 4 lines
so the server can wait for the lease to expire and purge
it
normally. Or am I missing something?When 4.0 client lease expires and there are still states
associated
with the client then the server allows this client to become
courtesy
client.I think the same thing happens if an NFSv4.1 client neglects
to
sendDESTROY_SESSION/DESTROY_CLIENTID. Either such a client is
broken
or malicious, but the server faces the same issue of protecting
itself from a DoS attack.IMO you should consider limiting the number of courteous clients
the server can hold onto. Let's say that number is 1000. When
the
server wants to turn a 1001st client into a courteous client,
it
can simply expire and purge the oldest courteous client on
its
list. Otherwise, over time, the 24-hour expiry will reduce
the
set of courteous clients back to zero.Quoted 1 line
What do you think?
Limiting the number of courteous clients to handle the cases of
broken/malicious 4.1 clients seems reasonable as the last resort.Quoted 8 lines
I think if a malicious 4.1 clients could mount the server's export,
opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already
broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack
surface.Quoted 24 lines
I think if we have to enforce a limit, then it's only for handling
of seriously buggy 4.1 clients which should not be the norm.
The
issue with this is how to pick an optimal number that is suitable
for the running server which can be a very slow or a very fast
server.Note that even if we impose an limit, that does not completely
solve
the problem with pynfs 4.0 test since its RPC timeout is configured
with 15 secs which just enough to expire 277 clients based on
53ms
for each client, unless we limit it ~270 clients which I think
it's
too low.Quoted 3 lines
This is what I plan to do:
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported
protocol at this time, and the same exposure exists for 4.1, it’s
just a little harder to exploit.Quoted 6 lines
If you submit the courteous server patch without support for 4.0,
I
think it needs to include a plan for how 4.0 will be added later.Why is there a problem here? The requirements are the same for 4.0
and
4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released
if
some other client requests a lock that conflicts with the cached
lock
(unless the client breaks the courtesy framework by renewing that
original lease before the conflict occurs). Otherwise, it is completely
up to the server when it decides to actually release the lock.Quoted 15 lines
For NFSv4.1 and NFSv4.2, we have
DESTROY_CLIENTID, which tells the
server when the client is actually done with the lease, making it
easy
to determine when it is safe to release all the courtesy locks. However
if the client does not sendDESTROY_CLIENTID, then we're in the same
situation with 4.x (x>0) as we would be with bog standard NFSv4.0.
The
lease has expired, and so the courtesy locks are liable to being
dropped.I agree the situation is the same for all minor versions.
Quoted 10 lines
At Hammerspace we have implemented courtesy locks, and our strategy
is
that when a conflict occurs, we drop the entire set of courtesy locks
so that we don't have to deal with the "some locks were revoked"
scenario. The reason is that when we originally implemented courtesy
locks, the Linux NFSv4 client support for lock revocation was aQuoted 8 lines
lot
less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the
support to make revocation more nuanced once you are confident that
the
coarser strategy is working as expected.Dai’s implementation does all that, and takes the coarser approach at
the moment. There are plans to explore the more nuanced behavior (by
revoking only the conflicting lock instead of dropping the whole lease) after this initial work is merged.The issue is there are certain pathological client behaviors (whether
malicious or accidental) that can run the server out of resources,
since it is holding onto lease state for a much longer time. We are
simply trying to design a lease garbage collection scheme to meet that challenge.Quoted 9 lines
I think limiting the number of courteous clients is a simple way to
do this, but we could also shorten the courtesy lifetime as more clients enter that state, to ensure that they don’t overrun the server’s memory. Another approach might be to add a shrinker that purges the oldest courteous clients when the server comes under memory pressure.Quoted 7 lines
We already have a scanner that tries to release all client state after
1 lease period. Just extend that to do it after 10 lease periods. If a
network partition hasn't recovered after 10 minutes, you probably have
bigger problems.Currently the courteous server allows 24hr for the network partition to
heal before releasing all client state. That seems to be excessive but
it was suggested for longer network partition conditions when switch/routers
being repaired/upgraded.Quoted 7 lines
You can limit the number of clients as well, but that leads into a rats
nest of other issues that have nothing to do with courtesy locks and
everything to do with the fact that any client can hold a lot of state.
Quoted 11 lines
The issue we currently have with courteous server and pynfs 4.0 tests is the number of courteous 4.0 clients the server has to expire when a
share reservation conflict occurs when servicing the OPEN. Each client
owns only few state in this case so we think the server spent most time
for deleting client's record in/var/lib/nfs. This is why we plan to limit the number of courteous clients for now. As a side effect, it might
also help to reduce resource consumption too.
Then kick off a thread or work item to do that asynchronously in the background, and return NFS4ERR_DELAY to the clients that were trying to grab locks in the meantime.
The above process is hardly just confined to NFSv4.0 clients. If there is a network partition, then the exact same record deleting needs to be applied to all NFSv4.1 and NFSv4.2 clients that hold locks and are unable to renew their leases, so you might as well make it work for everyone.
Signature · 3 lines
Trond Myklebust Linux NFS client maintainer, Hammerspace [email protected]
[email protected]
reviewerQuoted 431 lines · Trond Myklebust
Quoted 419 lines · On Mon, 2021-11-29 at 23:22 -0800, [email protected] wrote:
Quoted 397 lines · Trond Myklebust
Quoted 387 lines · Chuck Lever III
Quoted 335 lines
On Nov 29, 2021, at 11:08 PM, Trond Myklebust
<[email protected]> wrote:Quoted 309 lines · Chuck Lever III
Quoted 263 lines
Quoted 2 lines
On Nov 29, 2021, at 7:11 PM, Dai Ngo <[email protected]> wrote:
Quoted 254 lines · Chuck Lever III
Quoted 201 lines
Quoted 4 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo
<[email protected]>
wrote:Quoted 183 lines · Chuck Lever III
Hello Dai!
Quoted 173 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo
<[email protected]>
wrote:Quoted 143 lines · J. Bruce Fields
Quoted 139 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
On 11/21/21 7:04 PM, [email protected] wrote:
On 11/17/21 4:34 PM, J. Bruce Fields wrote:
On Wed, Nov 17, 2021 at 01:46:02PM -0800,
[email protected] wrote:
On 11/17/21 9:59 AM,
[email protected] wrote:
On 11/17/21 6:14 AM, J. Bruce Fields
wrote:
On Tue, Nov 16, 2021 at 03:06:32PM -
0800,
[email protected] wrote:
Just a reminder that this patch is
still
waiting for your review.
Yeah, I was procrastinating and
hoping
yo'ud
figure out the pynfs
failure for me....
Last time I ran 4.0 OPEN18 test by
itself
and
it passed. I will run
all OPEN tests together with 5.15-rc7
to
see if
the problem you've
seen still there.
I ran all tests in nfsv4.1 and nfsv4.0
with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both
courteous
and
non-courteous server:
Of those: 0 Skipped, 0 Failed, 0
Warned,
169
Passed
Results of nfs4.0 with non-courteous
server:
Of those: 8 Skipped, 1 Failed, 0
Warned,
577
Passed
test failed: LOCK24Results of nfs4.0 with courteous server:
Of those: 8 Skipped, 3 Failed, 0
Warned,
575
Passed
tests failed: LOCK24, OPEN18, OPEN30OPEN18 and OPEN30 test pass if each is
run by
itself.
Could well be a bug in the tests, I don't
know.
The reason OPEN18 failed was because the test
timed
out waiting for
the reply of an OPEN call. The RPC connection
used
for the test was
configured with 15 secs timeout. Note that
OPEN18
only fails when
the tests were run with 'all' option, this
test
passes if it's run
by itself.With courteous server, by the time OPEN18
runs,
there
are about 1026
courtesy 4.0 clients on the server and all of
these
clients have opened
the same file X with WRITE access. These
clients
were
created by the
previous tests. After each test completed,
since
4.0
does not have
session, the client states are not cleaned up
immediately on the
server and are allowed to become courtesy
clients.When OPEN18 runs (about 20 minutes after the
1st
test
started), it
sends OPEN of file X with
OPEN4_SHARE_DENY_WRITE
which causes the
server to check for conflicts with courtesy
clients.
The loop that
checks 1026 courtesy clients for share/access
conflict took less
than 1 sec. But it took about 55 secs, on my
VM,
for
the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC
connection
with 60 seconds
timeout and OPEN18 now consistently passed.
The
4.0
test results are
now the same for courteous and non-courteous
server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this
timeout
problem because the
4.1 clients and sessions are destroyed after
each
test completes.
Do you want me to send the patch to increase
the
timeout for pynfs?
or is there any other things you think we
should
do?I don't know.
Quoted 10 lines
55 seconds to clean up 1026 clients is about 50ms
per
client, which is
pretty slow. I wonder why. I guess it's
probably
updating the stable
storage information. Is/var/lib/nfs/on your
server
backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB
RAM
and
64GB of hard
disk. I think a production system that supports
this
many
clients should
have faster CPUs, faster storage.Quoted 4 lines
I wonder if that's an argument for limiting the
number of
courtesy
clients.Quoted 7 lines
I think we might want to treat 4.0 clients a bit different
from 4.1
clients. With 4.0, every client will become a courtesy
client after
the client is done with the export and unmounts it.Quoted 4 lines
It should be safe for a server to purge a client's lease
immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open
states
associated with them.Quoted 4 lines
When an NFSv4.0 client unmounts, all files should be closed
at that
point,Quoted 9 lines
I'm not sure pynfs does proper clean up after each subtest,
I
will
check. There must be state associated with the client in
order
for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 11 lines
Quoted 4 lines
so the server can wait for the lease to expire and purge
it
normally. Or am I missing something?When 4.0 client lease expires and there are still states
associated
with the client then the server allows this client to become
courtesy
client.I think the same thing happens if an NFSv4.1 client neglects
to
sendDESTROY_SESSION/DESTROY_CLIENTID. Either such a client is
broken
or malicious, but the server faces the same issue of protecting
itself from a DoS attack.IMO you should consider limiting the number of courteous clients
the server can hold onto. Let's say that number is 1000. When
the
server wants to turn a 1001st client into a courteous client,
it
can simply expire and purge the oldest courteous client on
its
list. Otherwise, over time, the 24-hour expiry will reduce
the
set of courteous clients back to zero.Quoted 1 line
What do you think?
Limiting the number of courteous clients to handle the cases of
broken/malicious 4.1 clients seems reasonable as the last resort.Quoted 8 lines
I think if a malicious 4.1 clients could mount the server's export,
opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already
broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack
surface.Quoted 24 lines
I think if we have to enforce a limit, then it's only for handling
of seriously buggy 4.1 clients which should not be the norm.
The
issue with this is how to pick an optimal number that is suitable
for the running server which can be a very slow or a very fast
server.Note that even if we impose an limit, that does not completely
solve
the problem with pynfs 4.0 test since its RPC timeout is configured
with 15 secs which just enough to expire 277 clients based on
53ms
for each client, unless we limit it ~270 clients which I think
it's
too low.Quoted 3 lines
This is what I plan to do:
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported
protocol at this time, and the same exposure exists for 4.1, it’s
just a little harder to exploit.Quoted 6 lines
If you submit the courteous server patch without support for 4.0,
I
think it needs to include a plan for how 4.0 will be added later.Why is there a problem here? The requirements are the same for 4.0
and
4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released
if
some other client requests a lock that conflicts with the cached
lock
(unless the client breaks the courtesy framework by renewing that
original lease before the conflict occurs). Otherwise, it is completely
up to the server when it decides to actually release the lock.Quoted 15 lines
For NFSv4.1 and NFSv4.2, we have
DESTROY_CLIENTID, which tells the
server when the client is actually done with the lease, making it
easy
to determine when it is safe to release all the courtesy locks. However
if the client does not sendDESTROY_CLIENTID, then we're in the same
situation with 4.x (x>0) as we would be with bog standard NFSv4.0.
The
lease has expired, and so the courtesy locks are liable to being
dropped.I agree the situation is the same for all minor versions.
Quoted 10 lines
At Hammerspace we have implemented courtesy locks, and our strategy
is
that when a conflict occurs, we drop the entire set of courtesy locks
so that we don't have to deal with the "some locks were revoked"
scenario. The reason is that when we originally implemented courtesy
locks, the Linux NFSv4 client support for lock revocation was aQuoted 8 lines
lot
less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the
support to make revocation more nuanced once you are confident that
the
coarser strategy is working as expected.Dai’s implementation does all that, and takes the coarser approach at
the moment. There are plans to explore the more nuanced behavior (by
revoking only the conflicting lock instead of dropping the whole lease) after this initial work is merged.The issue is there are certain pathological client behaviors (whether
malicious or accidental) that can run the server out of resources,
since it is holding onto lease state for a much longer time. We are
simply trying to design a lease garbage collection scheme to meet that challenge.Quoted 9 lines
I think limiting the number of courteous clients is a simple way to
do this, but we could also shorten the courtesy lifetime as more clients enter that state, to ensure that they don’t overrun the server’s memory. Another approach might be to add a shrinker that purges the oldest courteous clients when the server comes under memory pressure.Quoted 7 lines
We already have a scanner that tries to release all client state after
1 lease period. Just extend that to do it after 10 lease periods. If a
network partition hasn't recovered after 10 minutes, you probably have
bigger problems.Currently the courteous server allows 24hr for the network partition to
heal before releasing all client state. That seems to be excessive but
it was suggested for longer network partition conditions when switch/routers
being repaired/upgraded.Quoted 6 lines
You can limit the number of clients as well, but that leads into a rats
nest of other issues that have nothing to do with courtesy locks and
everything to do with the fact that any client can hold a lot of state.Quoted 11 lines
The issue we currently have with courteous server and pynfs 4.0 tests is the number of courteous 4.0 clients the server has to expire when a
share reservation conflict occurs when servicing the OPEN. Each client
owns only few state in this case so we think the server spent most time
for deleting client's record in/var/lib/nfs. This is why we plan to limit the number of courteous clients for now. As a side effect, it might
also help to reduce resource consumption too.
Quoted 3 lines
Then kick off a thread or work item to do that asynchronously in the background, and return
NFS4ERR_DELAYto the clients that were trying to grab locks in the meantime.
Thanks Trond, I think this is a reasonable approach. The behavior would be similar to a delegation recall during the OPEN.
My plan is:
1. If the number of conflict clients is less than 100 (some numbers that cover realistic usage) then release all their state synchronously in the OPEN call, and returns NFS4_OK to the NFS client. Most of conflicts should be handled by this case.
2. If the number of conflict clients is more than 100 then release the state of the 1st 100 clients as in (1) and trigger the laundromat thread to release state of the rest of the conflict clients, and return NFS4ERR_DELAY to the NFS client. This should be a rare condition.
-Dai
Quoted 7 lines
The above process is hardly just confined to NFSv4.0 clients. If there is a network partition, then the exact same record deleting needs to be applied to all NFSv4.1 and NFSv4.2 clients that hold locks and are unable to renew their leases, so you might as well make it work for everyone.
Quoted 15 lines · On Tue, Nov 30, 2021 at 07:52:10PM -0800, [email protected] wrote:
Quoted 3 lines · Trond Myklebust
Then kick off a thread or work item to do that asynchronously in the background, and return
NFS4ERR_DELAYto the clients that were trying to grab locks in the meantime.Thanks Trond, I think this is a reasonable approach. The behavior would be similar to a delegation recall during the OPEN.
My plan is:
1. If the number of conflict clients is less than 100 (some numbers that cover realistic usage) then release all their state synchronously in the OPEN call, and returns
NFS4_OKto the NFS client. Most of conflicts should be handled by this case.
Quoted 4 lines
2. If the number of conflict clients is more than 100 then release the state of the 1st 100 clients as in (1) and trigger the laundromat thread to release state of the rest of the conflict clients, and return
NFS4ERR_DELAYto the NFS client. This should be a rare condition.
Honestly, conflict with a courtesy client is itself not going to be that common, so personally I'd start simple and handle everything with the asynchronous approach.
--b.
Quoted 336 lines · Dai Ngo
Quoted 325 lines · Trond Myklebust
Quoted 316 lines · Chuck Lever III
Quoted 278 lines
On Nov 29, 2021, at 11:08 PM, Trond Myklebust
<[email protected]> wrote:Quoted 253 lines · Chuck Lever III
Quoted 220 lines
Quoted 2 lines
On Nov 29, 2021, at 7:11 PM, Dai Ngo <[email protected]> wrote:
Quoted 212 lines · Chuck Lever III
Quoted 169 lines
Quoted 3 lines
On Nov 29, 2021, at 2:36 PM, Dai Ngo <[email protected]> wrote:
Quoted 152 lines · Chuck Lever III
Hello Dai!
Quoted 143 lines
On Nov 29, 2021, at 1:32 PM, Dai Ngo
<[email protected]>
wrote:Quoted 118 lines · J. Bruce Fields
Quoted 106 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 103 lines · On 11/21/21 7:04 PM, [email protected] wrote:
On 11/17/21 4:34 PM, J. Bruce Fields wrote:
On Wed, Nov 17, 2021 at 01:46:02PM -0800,
[email protected] wrote:
On 11/17/21 9:59 AM,
[email protected] wrote:
On 11/17/21 6:14 AM, J. Bruce Fields wrote:
On Tue, Nov 16, 2021 at 03:06:32PM -0800,
[email protected] wrote:
Just a reminder that this patch is
still
waiting for your review.
Yeah, I was procrastinating and hoping
yo'ud
figure out the pynfs
failure for me....
Last time I ran 4.0 OPEN18 test by itself
and
it passed. I will run
all OPEN tests together with 5.15-rc7 to
see if
the problem you've
seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with
courteous and non-courteous
5.15-rc7 server.Nfs4.1 results are the same for both
courteous
and
non-courteous server:
Of those: 0 Skipped, 0 Failed, 0 Warned,
169
Passed
Results of nfs4.0 with non-courteous server:
Of those: 8 Skipped, 1 Failed, 0 Warned,
577
Passed
test failed: LOCK24Results of nfs4.0 with courteous server:
Of those: 8 Skipped, 3 Failed, 0 Warned,
575
Passed
tests failed: LOCK24, OPEN18, OPEN30OPEN18 and OPEN30 test pass if each is run by
itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test
timed
out waiting for
the reply of an OPEN call. The RPC connection
used
for the test was
configured with 15 secs timeout. Note that OPEN18
only fails when
the tests were run with 'all' option, this test
passes if it's run
by itself.With courteous server, by the time OPEN18 runs,
there
are about 1026
courtesy 4.0 clients on the server and all of
these
clients have opened
the same file X with WRITE access. These clients
were
created by the
previous tests. After each test completed, since
4.0
does not have
session, the client states are not cleaned up
immediately on the
server and are allowed to become courtesy
clients.When OPEN18 runs (about 20 minutes after the 1st
test
started), it
sends OPEN of file X with OPEN4_SHARE_DENY_WRITE
which causes the
server to check for conflicts with courtesy
clients.
The loop that
checks 1026 courtesy clients for share/access
conflict took less
than 1 sec. But it took about 55 secs, on my VM,
for
the server
to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC
connection
with 60 seconds
timeout and OPEN18 now consistently passed. The
4.0
test results are
now the same for courteous and non-courteous
server:8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 4 lines
Note that 4.1 tests do not suffer this timeout
problem because the
4.1 clients and sessions are destroyed after each
test completes.Do you want me to send the patch to increase the
timeout for pynfs?
or is there any other things you think we should
do?I don't know.
Quoted 7 lines
55 seconds to clean up 1026 clients is about 50ms per client, which is
pretty slow. I wonder why. I guess it's probably updating the stable
storage information. Is/var/lib/nfs/on your server backed by a hard
drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and
64GB of hard
disk. I think a production system that supports this many
clients should
have faster CPUs, faster storage.Quoted 4 lines
I wonder if that's an argument for limiting the
number of
courtesy
clients.Quoted 6 lines
I think we might want to treat 4.0 clients a bit different
from 4.1
clients. With 4.0, every client will become a courtesy client after
the client is done with the export and unmounts it.Quoted 3 lines
It should be safe for a server to purge a client's lease immediately
if there is no open or lock state associated with it.In this case, each client has opened files so there are open
states
associated with them.Quoted 4 lines
When an NFSv4.0 client unmounts, all files should be closed
at that
point,Quoted 7 lines
I'm not sure pynfs does proper clean up after each subtest, I
will
check. There must be state associated with the client in order
for
it to become courtesy client.Makes sense. Then a synthetic client like pynfs can DoS a courteous
server.Quoted 9 lines
Quoted 3 lines
so the server can wait for the lease to expire and purge it
normally. Or am I missing something?When 4.0 client lease expires and there are still states associated
with the client then the server allows this client to become
courtesy
client.I think the same thing happens if an NFSv4.1 client neglects to
sendDESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken
or malicious, but the server faces the same issue of protecting
itself from a DoS attack.IMO you should consider limiting the number of courteous clients
the server can hold onto. Let's say that number is 1000. When the
server wants to turn a 1001st client into a courteous client, it
can simply expire and purge the oldest courteous client on its
list. Otherwise, over time, the 24-hour expiry will reduce the
set of courteous clients back to zero.Quoted 1 line
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
Quoted 7 lines
I think if a malicious 4.1 clients could mount the server's export,
opens a file (to create state) and repeats the same with a different
client id then it seems like some basic security was already broken;
allowing unauthorized clients to mount server's exports.You can do this today with
AUTH_SYS. I consider it a genuine attack
surface.Quoted 21 lines
I think if we have to enforce a limit, then it's only for handling
of seriously buggy 4.1 clients which should not be the norm. The
issue with this is how to pick an optimal number that is suitable
for the running server which can be a very slow or a very fast server.Note that even if we impose an limit, that does not completely solve
the problem with pynfs 4.0 test since its RPC timeout is configured
with 15 secs which just enough to expire 277 clients based on 53ms
for each client, unless we limit it ~270 clients which I think it's
too low.This is what I plan to do:
Quoted 9 lines
Quoted 1 line
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I
think it needs to include a plan for how 4.0 will be added later.Why is there a problem here? The requirements are the same for 4.0 and
4.1 (or 4.2). If the lease under which the courtesy lock was established has expired, then that courtesy lock must be released if
some other client requests a lock that conflicts with the cached lock
(unless the client breaks the courtesy framework by renewing that original lease before the conflict occurs). Otherwise, it is completely
up to the server when it decides to actually release the lock.Quoted 11 lines
For NFSv4.1 and NFSv4.2, we have
DESTROY_CLIENTID, which tells the server when the client is actually done with the lease, making it easy
to determine when it is safe to release all the courtesy locks. However
if the client does not sendDESTROY_CLIENTID, then we're in the same
situation with 4.x (x>0) as we would be with bog standard NFSv4.0. The
lease has expired, and so the courtesy locks are liable to being dropped.I agree the situation is the same for all minor versions.
Quoted 5 lines
At Hammerspace we have implemented courtesy locks, and our strategy is
that when a conflict occurs, we drop the entire set of courtesy locks
so that we don't have to deal with the "some locks were revoked"Quoted 8 lines
scenario. The reason is that when we originally implemented courtesy
locks, the Linux NFSv4 client support for lock revocation was a lot less sophisticated than today. My suggestion is that you might therefore consider starting along this path, and then refining the support to make revocation more nuanced once you are confident that the
coarser strategy is working as expected.Dai’s implementation does all that, and takes the coarser approach at the moment. There are plans to explore the more nuanced behavior (by revoking only the conflicting lock instead of dropping the whole lease) after this initial work is merged.
The issue is there are certain pathological client behaviors (whether malicious or accidental) that can run the server out of resources, since it is holding onto lease state for a much longer time. We are simply trying to design a lease garbage collection scheme to meet that challenge.
Quoted 8 lines
I think limiting the number of courteous clients is a simple way to do this, but we could also shorten the courtesy lifetime as more clients enter that state, to ensure that they don’t overrun the server’s memory. Another approach might be to add a shrinker that purges the oldest courteous clients when the server comes under memory pressure.
Quoted 4 lines
We already have a scanner that tries to release all client state after 1 lease period. Just extend that to do it after 10 lease periods. If a network partition hasn't recovered after 10 minutes, you probably have bigger problems.
Quoted 4 lines
Currently the courteous server allows 24hr for the network partition to heal before releasing all client state. That seems to be excessive but it was suggested for longer network partition conditions when switch/routers being repaired/upgraded.
Sure, 24 hours is a long time.
For the benefit of others on the list, we have seen customer failure scenarios where networks were partitioned for that long.
But it's an arbitrary number, and there's no specification for how long a server needs to hold a courtesy client. We can make this number anything that is both convenient for the server implementation and valuable for outage recovery.
Quoted 11 lines
Quoted 3 lines
You can limit the number of clients as well, but that leads into a rats nest of other issues that have nothing to do with courtesy locks and everything to do with the fact that any client can hold a lot of state.
The issue we currently have with courteous server and pynfs 4.0 tests is the number of courteous 4.0 clients the server has to expire when a share reservation conflict occurs when servicing the OPEN. Each client owns only few state in this case so we think the server spent most time for deleting client's record in
/var/lib/nfs. This is why we plan to limit the number of courteous clients for now. As a side effect, it might also help to reduce resource consumption too.
I am a little concerned that we are trying to optimize a case that won't happen during practice. pynfs does not reflect any kind of realistic or reasonable client behavior -- it's designed to test very specific server operations.
All that needs to happen, IMO, is that the server needs to protect itself from resource exhaustion (which may occur for any of the minor versions).
So I'm taking a shine to the idea of using a shrinker to trim the older courtesy clients, rather than placing an arbitrary limit on the number of courtesy clients the server can hold at once. A shrinker should take into account the wide variance in the amount of lease state each client might have.
--
Chuck Lever
Quoted 4 lines · Chuck Lever III
I am a little concerned that we are trying to optimize a case that won't happen during practice. pynfs does not reflect any kind of realistic or reasonable client behavior -- it's designed to test very specific server operations.
I wonder how hard this problem would be to hit in normal use. I mean, a few hundred or a thousand clients doesn't sound that crazy. This case depends on an open deny, but you could hit the same problem with file locks. Would it be that weird to have a client trying to get a write lock on a file read-locked by a bunch of other clients?
--b.
Quoted 6 lines · Bruce Fields
Quoted 4 lines · Chuck Lever III
I am a little concerned that we are trying to optimize a case that won't happen during practice. pynfs does not reflect any kind of realistic or reasonable client behavior -- it's designed to test very specific server operations.
Quoted 8 lines
I wonder how hard this problem would be to hit in normal use. I mean, a
few hundred or a thousand clients doesn't sound that crazy. This case
depends on an open deny, but you could hit the same problem with file locks. Would it be that weird to have a client trying to get a write lock on a file read-locked by a bunch of other clients?
That's a scenario that is subject to starvation problems anyway. Particularly so on NFSv4.0, which lacks CB_NOTIFY_LOCK.
Signature · 3 lines
Trond Myklebust Linux NFS client maintainer, Hammerspace [email protected]
Quoted 16 lines · Trond Myklebust
Quoted 6 lines · Bruce Fields
Quoted 4 lines · Chuck Lever III
I am a little concerned that we are trying to optimize a case that won't happen during practice. pynfs does not reflect any kind of realistic or reasonable client behavior -- it's designed to test very specific server operations.
Quoted 8 lines
I wonder how hard this problem would be to hit in normal use. I mean, a
few hundred or a thousand clients doesn't sound that crazy. This case
depends on an open deny, but you could hit the same problem with file locks. Would it be that weird to have a client trying to get a write lock on a file read-locked by a bunch of other clients?
Quoted 1 line
That's a scenario that is subject to starvation problems anyway.
Yes, if it's hundreds of clients continuously grabbing read locks. But if it's something like: send all the readers a signal, then request a write lock as a way to wait for them to finish; then you'd normally expect to get it soon after the last client drops its lock.
I don't know, maybe that's uncommon.
--b.
[email protected]
reviewerQuoted 144 lines · Chuck Lever III
Quoted 122 lines · Dai Ngo
Quoted 119 lines · Chuck Lever III
Quoted 89 lines
Quoted 2 lines · Dai Ngo
Quoted 78 lines · Chuck Lever III
Hello Dai!
Quoted 75 lines · Dai Ngo
Quoted 59 lines · J. Bruce Fields
Quoted 58 lines · On Mon, Nov 29, 2021 at 09:13:16AM -0800, [email protected] wrote:
Hi Bruce,
Quoted 55 lines · On 11/21/21 7:04 PM, [email protected] wrote:
Quoted 18 lines · J. Bruce Fields
Quoted 17 lines · On Wed, Nov 17, 2021 at 01:46:02PM -0800, [email protected] wrote:
Quoted 8 lines · On 11/17/21 9:59 AM, [email protected] wrote:
Quoted 4 lines · J. Bruce Fields
On Tue, Nov 16, 2021 at 03:06:32PM -0800, [email protected] wrote:
Just a reminder that this patch is still waiting for your review.
Yeah, I was procrastinating and hoping yo'ud figure out the pynfs
failure for me....Last time I ran 4.0 OPEN18 test by itself and it passed. I will run all OPEN tests together with 5.15-rc7 to see if the problem you've seen still there.
I ran all tests in nfsv4.1 and nfsv4.0 with courteous and non-courteous 5.15-rc7 server.
Nfs4.1 results are the same for both courteous and non-courteous server:
Quoted 1 line
Of those: 0 Skipped, 0 Failed, 0 Warned, 169 Passed
Results of nfs4.0 with non-courteous server:
Quoted 1 line
Of those: 8 Skipped, 1 Failed, 0 Warned, 577 Passed
Quoted 8 lines
Quoted 7 lines
test failed: LOCK24
Results of nfs4.0 with courteous server:
Quoted 1 line
Of those: 8 Skipped, 3 Failed, 0 Warned, 575 Passed
tests failed: LOCK24, OPEN18, OPEN30
OPEN18 and OPEN30 test pass if each is run by itself.
Could well be a bug in the tests, I don't know.
The reason OPEN18 failed was because the test timed out waiting for the reply of an OPEN call. The RPC connection used for the test was configured with 15 secs timeout. Note that OPEN18 only fails when the tests were run with 'all' option, this test passes if it's run by itself.
With courteous server, by the time OPEN18 runs, there are about 1026 courtesy 4.0 clients on the server and all of these clients have opened the same file X with WRITE access. These clients were created by the previous tests. After each test completed, since 4.0 does not have session, the client states are not cleaned up immediately on the server and are allowed to become courtesy clients.
When OPEN18 runs (about 20 minutes after the 1st test started), it sends OPEN of file X with
OPEN4_SHARE_DENY_WRITEwhich causes the server to check for conflicts with courtesy clients. The loop that checks 1026 courtesy clients for share/access conflict took less than 1 sec. But it took about 55 secs, on my VM, for the server to expire all 1026 courtesy clients.I modified pynfs to configure the 4.0 RPC connection with 60 seconds timeout and OPEN18 now consistently passed. The 4.0 test results are now the same for courteous and non-courteous server:
8 Skipped, 1 Failed, 0 Warned, 577 Passed
Note that 4.1 tests do not suffer this timeout problem because the 4.1 clients and sessions are destroyed after each test completes.
Quoted 8 lines
Quoted 2 lines
Do you want me to send the patch to increase the timeout for pynfs? or is there any other things you think we should do?
I don't know.
55 seconds to clean up 1026 clients is about 50ms per client, which is pretty slow. I wonder why. I guess it's probably updating the stable storage information. Is
/var/lib/nfs/on your server backed by a hard drive or an SSD or something else?My server is a virtualbox VM that has 1 CPU, 4GB RAM and 64GB of hard disk. I think a production system that supports this many clients should have faster CPUs, faster storage.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I wonder if that's an argument for limiting the number of courtesy clients.
I think we might want to treat 4.0 clients a bit different from 4.1 clients. With 4.0, every client will become a courtesy client after the client is done with the export and unmounts it.
It should be safe for a server to purge a client's lease immediately if there is no open or lock state associated with it.
Quoted 8 lines
In this case, each client has opened files so there are open states associated with them.
Quoted 2 lines
When an NFSv4.0 client unmounts, all files should be closed at that point,
I'm not sure pynfs does proper clean up after each subtest, I will check. There must be state associated with the client in order for it to become courtesy client.
Makes sense. Then a synthetic client like pynfs can DoS a courteous server.
Quoted 5 lines
Quoted 2 lines
so the server can wait for the lease to expire and purge it normally. Or am I missing something?
When 4.0 client lease expires and there are still states associated with the client then the server allows this client to become courtesy client.
I think the same thing happens if an NFSv4.1 client neglects to send
DESTROY_SESSION/DESTROY_CLIENTID. Either such a client is broken or malicious, but the server faces the same issue of protecting itself from a DoS attack.IMO you should consider limiting the number of courteous clients the server can hold onto. Let's say that number is 1000. When the server wants to turn a 1001st client into a courteous client, it can simply expire and purge the oldest courteous client on its list. Otherwise, over time, the 24-hour expiry will reduce the set of courteous clients back to zero.
Quoted 8 lines
Quoted 1 line
What do you think?
Limiting the number of courteous clients to handle the cases of broken/malicious 4.1 clients seems reasonable as the last resort.
I think if a malicious 4.1 clients could mount the server's export, opens a file (to create state) and repeats the same with a different client id then it seems like some basic security was already broken; allowing unauthorized clients to mount server's exports.
You can do this today with
AUTH_SYS. I consider it a genuine attack surface.Quoted 11 lines
I think if we have to enforce a limit, then it's only for handling of seriously buggy 4.1 clients which should not be the norm. The issue with this is how to pick an optimal number that is suitable for the running server which can be a very slow or a very fast server.
Note that even if we impose an limit, that does not completely solve the problem with pynfs 4.0 test since its RPC timeout is configured with 15 secs which just enough to expire 277 clients based on 53ms for each client, unless we limit it ~270 clients which I think it's too low.
Quoted 6 lines
Quoted 3 lines
This is what I plan to do:
1. do not support 4.0 courteous clients, for sure.
Not supporting 4.0 isn’t an option, IMHO. It is a fully supported protocol at this time, and the same exposure exists for 4.1, it’s just a little harder to exploit.
If you submit the courteous server patch without support for 4.0, I think it needs to include a plan for how 4.0 will be added later.
Seems like we should support both 4.0 and 4.x (x>=1) at the same time.
Quoted 5 lines
Quoted 4 lines
2. limit the number of courteous clients to 1000 (?), if you still think we need it.
I think this limit is necessary. It can be set based on the server’s physical memory size if a dynamic limit is desired.
Just to be clear, the problem of pynfs with 4.0 is that the server takes ~55 secs to expire 1026 4.0 courteous clients, which comes out to ~50ms per client. This causes the test to time out in waiting for RPC reply of the OPEN that triggers the conflicts.
I don't know exactly where the time spent in the process of expiring a client. But as Bruce mentioned, it could be related to the time to access /var/lib/nfs to remove the client's persistent record. I think that is most likely the case because the number of states owned by each client should be small since each test is short and does simple ops. So I think this problem is related to the number of clients and not number of states owned by the clients. This is not the memory resource shortage problem due to too many state which we have planned to address it after the initial phase.
I'd vote to use a static limit for now, say 1000 clients, to avoid complicating the courteous server code for something that would not happen most of the time.
-Dai
Quoted 32 lines
Quoted 32 lines
Pls let me know what you think.
Thanks,
-DaiQuoted 25 lines
Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Since there is
no destroy session/client with 4.0, the courteous server allows the client to be around and becomes a courtesy client. So after awhile, even with normal usage, there will be lots 4.0 courtesy clients hanging around and these clients won't be destroyed until 24hrs later, or until they cause conflicts with other clients.We can reduce the
courtesy_client_expirytime for 4.0 clients from 24hrs to 15/20 mins, enough for most network partition to heal?, or limit the number of 4.0 courtesy clients. Or don't support 4.0 clients at all which is my preference since I think in general users should skip 4.0 and use 4.1 instead.Quoted 6 lines
Quoted 6 lines
Quoted 1 line
-Dai
--
Chuck Lever--
Chuck Lever
Quoted 8 lines · On Mon, Nov 29, 2021 at 11:13:34PM -0800, [email protected] wrote:
Just to be clear, the problem of pynfs with 4.0 is that the server takes ~55 secs to expire 1026 4.0 courteous clients, which comes out to ~50ms per client. This causes the test to time out in waiting for RPC reply of the OPEN that triggers the conflicts.
I don't know exactly where the time spent in the process of expiring a client. But as Bruce mentioned, it could be related to the time to access
/var/lib/nfsto remove the client's persistent record.
Could you try something like
strace -r -$(pidof) -oTRACE
and maybe we could take a look at TRACE? My hope would be that there'd be a clear set of syscalls whose time, multiplied by 1026, explains most of that 55 seconds. Then it might be worth checking whether there are any easy optimizations possible.
--b.
[email protected]
reviewerQuoted 6 lines · Bruce Fields
Quoted 5 lines · On Mon, Nov 29, 2021 at 11:13:34PM -0800, [email protected] wrote:
Just to be clear, the problem of pynfs with 4.0 is that the server takes ~55 secs to expire 1026 4.0 courteous clients, which comes out to ~50ms per client. This causes the test to time out in waiting for RPC reply of the OPEN that triggers the conflicts.
Quoted 6 lines
Quoted 3 lines
I don't know exactly where the time spent in the process of expiring a client. But as Bruce mentioned, it could be related to the time to access
/var/lib/nfsto remove the client's persistent record.Could you try something like
strace -r -$(pidof) -oTRACE
Strace does not have any info that shows where the server spent time when expiring client state. The client record is removed by nfsd4_umh_cltrack_remove doing upcall to user space helper /sbin/nfsdcltrack to do the job. I used the low-tech debug tool, printk, to measure the time spent by nfsd4_client_record_remove. Here is a sample of the output, START and END are in milliseconds:
Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: START [0x15d418] clp[ffff888119206040] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: END [0x15d459] clp[ffff888119206040] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: START [0x15d461] clp[ffff888119206740] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: END [0x15d48e] clp[ffff888119206740] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: START [0x15d49c] clp[ffff88811b54e000] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: END [0x15d4c5] clp[ffff88811b54e000] client_tracking_ops[ffffffffa04bc2e0]
The average time spent to remove the client record is about ~50ms, matches with the time reported by pynfs test. This confirms what Bruce suspected earlier.
-Dai
Quoted 7 lines
and maybe we could take a look at TRACE? My hope would be that there'd be a clear set of syscalls whose time, multiplied by 1026, explains most of that 55 seconds. Then it might be worth checking whether there are any easy optimizations possible.
--b.
Quoted 8 lines · On Tue, Nov 30, 2021 at 07:50:13PM -0800, [email protected] wrote:
Quoted 6 lines · Bruce Fields
Quoted 5 lines · On Mon, Nov 29, 2021 at 11:13:34PM -0800, [email protected] wrote:
Just to be clear, the problem of pynfs with 4.0 is that the server takes ~55 secs to expire 1026 4.0 courteous clients, which comes out to ~50ms per client. This causes the test to time out in waiting for RPC reply of the OPEN that triggers the conflicts.
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines
I don't know exactly where the time spent in the process of expiring a client. But as Bruce mentioned, it could be related to the time to access
/var/lib/nfsto remove the client's persistent record.Could you try something like
strace -r -$(pidof) -oTRACE
Oops, I mean $(pidof nfsdcld). But, your system isn't using that:
Quoted 15 lines
Strace does not have any info that shows where the server spent time when expiring client state. The client record is removed by
nfsd4_umh_cltrack_removedoing upcall to user space helper/sbin/nfsdcltrackto do the job. I used the low-tech debug tool, printk, to measure the time spent bynfsd4_client_record_remove. Here is a sample of the output, START and END are in milliseconds:Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: START [0x15d418] clp[ffff888119206040] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: END [0x15d459] clp[ffff888119206040] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: START [0x15d461] clp[ffff888119206740] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: END [0x15d48e] clp[ffff888119206740] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: START [0x15d49c] clp[ffff88811b54e000] client_tracking_ops[ffffffffa04bc2e0] Nov 30 12:31:04 localhost kernel: nfsd4_client_record_remove: END [0x15d4c5] clp[ffff88811b54e000] client_tracking_ops[ffffffffa04bc2e0]
Quoted 3 lines
The average time spent to remove the client record is about ~50ms, matches with the time reported by pynfs test. This confirms what Bruce suspected earlier.
OK, good to know. It'd be interesting to dig into where nfsdcltrack is spending its time, which we could do by replacing it with a wrapper that runs the real nfsdcltrack under strace.
Though maybe it'd be better to do this on a system using nfsdcld, since that's what we're transitioning to.
--b.
Do you have a public git tree with your latest patches?
--b.
[email protected]
reviewerQuoted 1 line · Bruce Fields
Do you have a public git tree with your latest patches?
No, I don't but I can push it to Chuck's public tree. I need to prepare the patch.
-Dai
Quoted 2 lines
--b.
Quoted 5 lines · On Wed, Dec 01, 2021 at 10:47:28AM -0800, [email protected] wrote:
Quoted 1 line · Bruce Fields
Do you have a public git tree with your latest patches?
No, I don't but I can push it to Chuck's public tree. I need to prepare the patch.
OK, it's not a big deal.--b.
Quoted 7 lines · Bruce Fields
Do you have a public git tree with your latest patches?
--b.
Dai's patches have been pushed to the nfsd-courteous-server topic branch at
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux.git
I can fold them into my for-next branch if we agree they are ready for broader test exposure.
--
Chuck Lever
Quoted 6 lines · Bruce Fields
OK, good to know. It'd be interesting to dig into where nfsdcltrack is spending its time, which we could do by replacing it with a wrapper that runs the real nfsdcltrack under strace.
Though maybe it'd be better to do this on a system using nfsdcld, since that's what we're transitioning to.
Trying that on a test VM here, I see each upcall doing 3 fdatasyncs() of an sqlite-journal file. On my setup, each of those is taking a few milliseconds. I wonder if it an do better.
--b.
Quoted 11 lines · Bruce Fields
Quoted 6 lines · Bruce Fields
OK, good to know. It'd be interesting to dig into where nfsdcltrack is spending its time, which we could do by replacing it with a wrapper that runs the real nfsdcltrack under strace.
Though maybe it'd be better to do this on a system using nfsdcld, since that's what we're transitioning to.
Trying that on a test VM here, I see each upcall doing 3
fdatasyncs()of an sqlite-journal file. On my setup, each of those is taking a few milliseconds. I wonder if it an do better.
If I understand the sqlite documentation correctly, I *think* that if we use journal_mode WAL with synchronous FULL, we should get the assurances nfsd needs with one sync per transaction.
--b.
Quoted 9 lines · Bruce Fields
Quoted 8 lines · Bruce Fields
Quoted 6 lines · Bruce Fields
OK, good to know. It'd be interesting to dig into where nfsdcltrack is spending its time, which we could do by replacing it with a wrapper that runs the real nfsdcltrack under strace.
Though maybe it'd be better to do this on a system using nfsdcld, since that's what we're transitioning to.
Quoted 7 lines
Quoted 3 lines
Trying that on a test VM here, I see each upcall doing 3
fdatasyncs()of an sqlite-journal file. On my setup, each of those is taking a few milliseconds. I wonder if it an do better.If I understand the sqlite documentation correctly, I *think* that if we use
journal_modeWAL with synchronous FULL, we should get the assurances nfsd needs with one sync per transaction.
So I *think* that would mean just doing something like (untested, don't have much idea what I'm doing):
utils/nfsdcld/sqlite.c +7 -0
@@ -826,6 +826,13 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } + ret =sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); +if (ret) + goto out_close; + ret =sqlite3_exec (dbh,"PRAGMA synchronous = FULL;" ,NULL ,NULL ,NULL ); +if (ret) + goto out_close; + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :
I also wonder how expensive may be the extra overhead of starting up nfsdcltrack each time.
--b.
Quoted 14 lines · Bruce Fields
Quoted 13 lines · Bruce Fields
Quoted 11 lines · Bruce Fields
Quoted 6 lines · Bruce Fields
OK, good to know. It'd be interesting to dig into where nfsdcltrack is spending its time, which we could do by replacing it with a wrapper that runs the real nfsdcltrack under strace.
Though maybe it'd be better to do this on a system using nfsdcld, since that's what we're transitioning to.
Trying that on a test VM here, I see each upcall doing 3
fdatasyncs()of an sqlite-journal file. On my setup, each of those is taking a few milliseconds. I wonder if it an do better.
Quoted 6 lines
Quoted 3 lines
If I understand the sqlite documentation correctly, I *think* that if we use
journal_modeWAL with synchronous FULL, we should get the assurances nfsd needs with one sync per transaction.So I *think* that would mean just doing something like (untested, don't have much idea what I'm doing):
OK, tried that out on my test VM, and: yes, the resulting strace was much simpler (and, in particular, had only one fdatasync per upcall instead of 3), and total time to expire 1000 courtesy clients was 6.5 seconds instead of 15.9. So, I'll clean up that patch and pass it along to Steve D.
This is all a bit of a derail, I know, but I suspect this will be a bottleneck in other cases too, like when a lot of clients are reclaiming after reboot.
We do need nfsdcld to sync to disk before returning to the kernel, so this probably can't be further optimized without doing something more complicated to allow some kind of parallelism and batching.
So if you have a ton of clients you'll just need /var/lib/nfs to be on low-latency storage.
--b.
Quoted 24 lines
utils/nfsdcld/sqlite.c +7
-0@@ -826,6 +826,13 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } + ret =sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); +if (ret) + goto out_close; + ret =sqlite3_exec (dbh,"PRAGMA synchronous = FULL;" ,NULL ,NULL ,NULL ); +if (ret) + goto out_close; + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :I also wonder how expensive may be the extra overhead of starting up nfsdcltrack each time.
--b.
PATCH 1/1 nfsdcld: use WAL journal for faster commits
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
--- utils/nfsdcld/sqlite.c | 3 +++ 1 file changed, 3 insertions(+)
utils/nfsdcld/sqlite.c +3 -0
@@ -826,6 +826,9 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); +sqlite3_exec (dbh,"PRAGMA synchronous = FULL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :
Signature · 1 line
2.33.1
Re: [PATCH] nfsdcld: use WAL journal for faster commits
Quoted 10 lines · Bruce Fields
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
Quoted 6 lines
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
I'm in full philosophical agreement for performance improvements in this area. There are some caveats for WAL:
- It requires SQLite v3.7.0 (2010). configure.ac may need to be updated.
- All processes using the DB file have to be on the same system. Not sure if this matters for some DR scenarios that nfs-utils is supposed to support.
- WAL mode is persistent; you could set this at database creation time and it should be sticky.
- Documentation says "synchronous = FULL is the most commonly used synchronous setting when not in WAL mode." Why are both PRAGMAs necessary here?
I agree that nfsdcld functionality is not affected if the first PRAGMA fails.
Quoted 22 lines
Signed-off-by J. Bruce Fields <[email protected]>---
utils/nfsdcld/sqlite.c| 3 +++1 file changed, 3 insertions(+)utils/nfsdcld/sqlite.c +3
-0@@ -826,6 +826,9 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); +sqlite3_exec (dbh,"PRAGMA synchronous = FULL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :Signature · 1 line
2.33.1
--
Chuck Lever
Re: [PATCH] nfsdcld: use WAL journal for faster commits
Quoted 17 lines · Chuck Lever III
Quoted 10 lines · Bruce Fields
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
Quoted 6 lines
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
Quoted 5 lines
I'm in full philosophical agreement for performance improvements in this area. There are some caveats for WAL:
- It requires SQLite v3.7.0 (2010). configure.ac may need to be updated.
Makes sense. But I dug around a bit, and how to do this is a total mystery to me....
Quoted 3 lines
- All processes using the DB file have to be on the same system. Not sure if this matters for some DR scenarios that nfs-utils is supposed to support.
I don't think we support that.
Quoted 2 lines
- WAL mode is persistent; you could set this at database creation time and it should be sti cky.
I wanted to upgrade existing databases too, and figured there's no harm in calling it on each startup.
Quoted 3 lines
- Documentation says "synchronous = FULL is the most commonly used synchronous setting when not in WAL mode." Why are both PRAGMAs necessary here?
Maybe they're not; I think I did see that FULL is actually the default but I can't find that in the documentation right now.
--b.
Quoted 32 lines
I agree that nfsdcld functionality is not affected if the first PRAGMA fails.
Quoted 22 lines
Signed-off-by J. Bruce Fields <[email protected]>---
utils/nfsdcld/sqlite.c| 3 +++1 file changed, 3 insertions(+)utils/nfsdcld/sqlite.c +3
-0@@ -826,6 +826,9 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); +sqlite3_exec (dbh,"PRAGMA synchronous = FULL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :Signature · 1 line
2.33.1--
Chuck Lever
Re: [PATCH] nfsdcld: use WAL journal for faster commits
Quoted 21 lines · Bruce Fields
Quoted 17 lines · Chuck Lever III
Quoted 16 lines
Quoted 3 lines · Bruce Fields
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
Quoted 8 lines
Quoted 5 lines
I'm in full philosophical agreement for performance improvements in this area. There are some caveats for WAL:
- It requires SQLite v3.7.0 (2010). configure.ac may need to be updated.
Makes sense. But I dug around a bit, and how to do this is a total mystery to me....
aclocal/libsqlite3.m4 has an SQLITE_VERSION_NUMBER check.
Quoted 11 lines
Quoted 3 lines
- All processes using the DB file have to be on the same system. Not sure if this matters for some DR scenarios that nfs-utils is supposed to support.
I don't think we support that.
Quoted 2 lines
- WAL mode is persistent; you could set this at database creation time and it should be sti cky.
I wanted to upgrade existing databases too, and figured there's no harm in calling it on each startup.
Ah. Makes sense!
Quoted 41 lines
Quoted 3 lines
- Documentation says "synchronous = FULL is the most commonly used synchronous setting when not in WAL mode." Why are both PRAGMAs necessary here?
Maybe they're not; I think I did see that FULL is actually the default but I can't find that in the documentation right now.
--b.
Quoted 32 lines
I agree that nfsdcld functionality is not affected if the first PRAGMA fails.
Quoted 22 lines
Signed-off-by J. Bruce Fields <[email protected]>---
utils/nfsdcld/sqlite.c| 3 +++1 file changed, 3 insertions(+)utils/nfsdcld/sqlite.c +3
-0@@ -826,6 +826,9 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); +sqlite3_exec (dbh,"PRAGMA synchronous = FULL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :Signature · 1 line
2.33.1--
Chuck Lever
Re: [PATCH] nfsdcld: use WAL journal for faster commits
Quoted 24 lines · Chuck Lever III
Quoted 24 lines · Bruce Fields
Quoted 20 lines · Chuck Lever III
Quoted 10 lines
Quoted 3 lines · Bruce Fields
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
Quoted 6 lines
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
I'm in full philosophical agreement for performance improvements in this area. There are some caveats for WAL:
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
- It requires SQLite v3.7.0 (2010). configure.ac may need to be updated.
Makes sense. But I dug around a bit, and how to do this is a total mystery to me....
aclocal/libsqlite3.m4 has an
SQLITE_VERSION_NUMBERcheck.
I looked got stuck trying to figure out why the #%^ it's comparing to SQLITE_VERSION_NUMBER. OK, I see now, it's just some sanity check. Here's take 2.
--b.
From c22d3a2d8576273934773fefac933d4f8e04776b Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <[email protected]>
Date: Fri, 3 Dec 2021 10:27:53 -0500
Subject: [PATCH] nfsdcld: use WAL journal for faster commits
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
--- aclocal/libsqlite3.m4 | 2 +- utils/nfsdcld/sqlite.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)
aclocal/libsqlite3.m4 +1 -1
@@ -22,7 +22,7 @@ AC_DEFUN([AC_SQLITE3_VERS], [ int vers = sqlite3_libversion_number(); return vers != SQLITE_VERSION_NUMBER || - vers < 3003000; + vers < 3007000; } ], [libsqlite3_cv_is_recent=yes], [libsqlite3_cv_is_recent=no], [libsqlite3_cv_is_recent=unknown])
utils/nfsdcld/sqlite.c +2 -0
@@ -826,6 +826,8 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :
Signature · 1 line
2.33.1
Chuck Lever III
Reviewed-byRe: [PATCH] nfsdcld: use WAL journal for faster commits
Quoted 51 lines · Bruce Fields
Quoted 24 lines · Chuck Lever III
Quoted 24 lines · Bruce Fields
Quoted 20 lines · Chuck Lever III
Quoted 10 lines
Quoted 3 lines · Bruce Fields
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
Quoted 6 lines
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
I'm in full philosophical agreement for performance improvements in this area. There are some caveats for WAL:
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
- It requires SQLite v3.7.0 (2010). configure.ac may need to be updated.
Makes sense. But I dug around a bit, and how to do this is a total mystery to me....
aclocal/libsqlite3.m4 has an
SQLITE_VERSION_NUMBERcheck.I looked got stuck trying to figure out why the #%^ it's comparing to
SQLITE_VERSION_NUMBER. OK, I see now, it's just some sanity check. Here's take 2.--b.
From
c22d3a2d8576273934773fefac933d4f8e04776bMon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <[email protected]>
Date: Fri, 3 Dec 2021 10:27:53 -0500
Subject: [PATCH] nfsdcld: use WAL journal for faster commitsCurrently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
Quoted 8 lines
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
Signed-off-by J. Bruce Fields <[email protected]>
Nice.
Quoted 33 lines
---
aclocal/libsqlite3.m4 | 2 +-utils/nfsdcld/sqlite.c| 2 ++2 files changed, 3 insertions(+), 1 deletion(-)aclocal/libsqlite3.m4 +1
-1@@ -22,7 +22,7 @@ AC_DEFUN([AC_SQLITE3_VERS], [ int vers = sqlite3_libversion_number(); return vers != SQLITE_VERSION_NUMBER || - vers < 3003000; + vers < 3007000; } ], [libsqlite3_cv_is_recent=yes], [libsqlite3_cv_is_recent=no], [libsqlite3_cv_is_recent=unknown])utils/nfsdcld/sqlite.c +2
-0@@ -826,6 +826,8 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :Signature · 1 line
2.33.1
--
Chuck Lever
PATCH 1/1 nfsdcld: use WAL journal for faster commits
From: "J. Bruce Fields" <[email protected]>
Currently nfsdcld is doing three fdatasyncs for each upcall. Based on SQLite documentation, WAL mode should also be safe, and I can confirm from an strace that it results in only one fdatasync each.
This may be a bottleneck e.g. when lots of clients are being created or expired at once (e.g. on reboot).
Not bothering with error checking, as this is just an optimization and nfsdcld will still function without. (Might be better to log something on failure, though.)
--- aclocal/libsqlite3.m4 | 2 +- utils/nfsdcld/sqlite.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)
Resending to make sure SteveD saw this....--b.
aclocal/libsqlite3.m4 +1 -1
@@ -22,7 +22,7 @@ AC_DEFUN([AC_SQLITE3_VERS], [ int vers = sqlite3_libversion_number(); return vers != SQLITE_VERSION_NUMBER || - vers < 3003000; + vers < 3007000; } ], [libsqlite3_cv_is_recent=yes], [libsqlite3_cv_is_recent=no], [libsqlite3_cv_is_recent=unknown])
utils/nfsdcld/sqlite.c +2 -0
@@ -826,6 +826,8 @@ sqlite_prepare_dbh(const char *topdir) goto out_close; } +sqlite3_exec (dbh,"PRAGMA journal_mode = WAL;" ,NULL ,NULL ,NULL ); + ret =sqlite_query_schema_version ();switch (ret) {case CLD_SQLITE_LATEST_SCHEMA_VERSION :
Signature · 1 line
2.33.1