Skip to contentSkip to conversation

pinctrl: Get rid of duplicate of_node assignment in the drivers

PATCH In review Andy Shevchenko 4 participants 6 messages Dec 14, 2021 – Dec 16, 2021

Subsystems (21)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 pinctrl: Get rid of duplicate of_node assignment in the drivers

GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

---
v2: no changes

 drivers/pinctrl/actions/pinctrl-owl.c      | 1 -
 drivers/pinctrl/bcm/pinctrl-bcm2835.c      | 1 -
 drivers/pinctrl/bcm/pinctrl-iproc-gpio.c   | 1 -
 drivers/pinctrl/bcm/pinctrl-nsp-gpio.c     | 1 -
 drivers/pinctrl/cirrus/pinctrl-lochnagar.c | 3 ---
 drivers/pinctrl/mediatek/pinctrl-moore.c   | 7 +++----
 drivers/pinctrl/mediatek/pinctrl-paris.c   | 5 ++---
 drivers/pinctrl/pinctrl-amd.c              | 3 ---
 drivers/pinctrl/pinctrl-at91-pio4.c        | 1 -
 drivers/pinctrl/pinctrl-at91.c             | 1 -
 drivers/pinctrl/pinctrl-digicolor.c        | 5 ++---
 drivers/pinctrl/pinctrl-mcp23s08.c         | 1 -
 drivers/pinctrl/pinctrl-ocelot.c           | 1 -
 drivers/pinctrl/pinctrl-oxnas.c            | 1 -
 drivers/pinctrl/pinctrl-pic32.c            | 2 +-
 drivers/pinctrl/pinctrl-stmfx.c            | 1 -
 drivers/pinctrl/pinctrl-sx150x.c           | 3 ---
 drivers/pinctrl/pinctrl-xway.c             | 1 -
 drivers/pinctrl/qcom/pinctrl-msm.c         | 1 -
 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c   | 1 -
 drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c    | 1 -
 drivers/pinctrl/renesas/pinctrl-rza2.c     | 1 -
 drivers/pinctrl/spear/pinctrl-plgpio.c     | 1 -
 drivers/pinctrl/vt8500/pinctrl-wmt.c       | 1 -
 24 files changed, 8 insertions(+), 37 deletions(-)
drivers/pinctrl/actions/pinctrl-owl.c +0 -1
index 781f2200ed58..ed46abc15d72 100644
@@ -874,7 +874,6 @@ static int owl_gpio_init(struct owl_pinctrl *pctrl)
 	chip->label = dev_name(pctrl->dev);
 	chip->parent = pctrl->dev;
 	chip->owner = THIS_MODULE;
-	chip->of_node = pctrl->dev->of_node;
 
 	pctrl->irq_chip.name = chip->of_node->name;
 	pctrl->irq_chip.irq_ack = owl_gpio_irq_ack;
drivers/pinctrl/bcm/pinctrl-bcm2835.c +0 -1
index 2abcc6ce4eba..c677be102938 100644
@@ -1222,7 +1222,6 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 
 	pc->gpio_chip = *pdata->gpio_chip;
 	pc->gpio_chip.parent = dev;
-	pc->gpio_chip.of_node = np;
 
 	for (i = 0; i < BCM2835_NUM_BANKS; i++) {
 		unsigned long events;
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c +0 -1
index a7a0dd638a26..52fa2f4cd618 100644
@@ -836,7 +836,6 @@ static int iproc_gpio_probe(struct platform_device *pdev)
 	chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
 	gc->label = dev_name(dev);
 	gc->parent = dev;
-	gc->of_node = dev->of_node;
 	gc->request = iproc_gpio_request;
 	gc->free = iproc_gpio_free;
 	gc->direction_input = iproc_gpio_direction_input;
drivers/pinctrl/bcm/pinctrl-nsp-gpio.c +0 -1
index e03142895f61..643dbd315033 100644
@@ -648,7 +648,6 @@ static int nsp_gpio_probe(struct platform_device *pdev)
 	gc->ngpio = val;
 	gc->label = dev_name(dev);
 	gc->parent = dev;
-	gc->of_node = dev->of_node;
 	gc->request = gpiochip_generic_request;
 	gc->free = gpiochip_generic_free;
 	gc->direction_input = nsp_gpio_direction_input;
drivers/pinctrl/cirrus/pinctrl-lochnagar.c +0 -3
index 670ac53a3141..3fda4446d70b 100644
@@ -1161,9 +1161,6 @@ static int lochnagar_pin_probe(struct platform_device *pdev)
 	priv->gpio_chip.can_sleep = true;
 	priv->gpio_chip.parent = dev;
 	priv->gpio_chip.base = -1;
-#ifdef CONFIG_OF_GPIO
-	priv->gpio_chip.of_node = dev->of_node;
-#endif
 
 	switch (lochnagar->type) {
 	case LOCHNAGAR1:
drivers/pinctrl/mediatek/pinctrl-moore.c +3 -4
index ad3b67163973..5bfaa84839c7 100644
@@ -519,7 +519,7 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
 }
 
-static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
+static int mtk_build_gpiochip(struct mtk_pinctrl *hw)
 {
 	struct gpio_chip *chip = &hw->chip;
 	int ret;
@@ -536,7 +536,6 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
 	chip->set_config	= mtk_gpio_set_config;
 	chip->base		= -1;
 	chip->ngpio		= hw->soc->npins;
-	chip->of_node		= np;
 	chip->of_gpio_n_cells	= 2;
 
 	ret = gpiochip_add_data(chip, hw);
@@ -550,7 +549,7 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
 	 * Documentation/devicetree/bindings/gpio/gpio.txt on how to
 	 * bind pinctrl and gpio drivers via the "gpio-ranges" property.
 	 */
-	if (!of_find_property(np, "gpio-ranges", NULL)) {
+	if (!of_find_property(hw->dev->of_node, "gpio-ranges", NULL)) {
 		ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0,
 					     chip->ngpio);
 		if (ret < 0) {
@@ -691,7 +690,7 @@ int mtk_moore_pinctrl_probe(struct platform_device *pdev,
 			 "Failed to add EINT, but pinctrl still can work\n");
 
 	/* Build gpiochip should be after pinctrl_enable is done */
-	err = mtk_build_gpiochip(hw, pdev->dev.of_node);
+	err = mtk_build_gpiochip(hw);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add gpio_chip\n");
 		return err;
drivers/pinctrl/mediatek/pinctrl-paris.c +2 -3
index 4c6f6d967b18..f9f9110f2107 100644
@@ -895,7 +895,7 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
 }
 
-static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
+static int mtk_build_gpiochip(struct mtk_pinctrl *hw)
 {
 	struct gpio_chip *chip = &hw->chip;
 	int ret;
@@ -913,7 +913,6 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
 	chip->set_config	= mtk_gpio_set_config;
 	chip->base		= -1;
 	chip->ngpio		= hw->soc->npins;
-	chip->of_node		= np;
 	chip->of_gpio_n_cells	= 2;
 
 	ret = gpiochip_add_data(chip, hw);
@@ -1037,7 +1036,7 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 			 "Failed to add EINT, but pinctrl still can work\n");
 
 	/* Build gpiochip should be after pinctrl_enable is done */
-	err = mtk_build_gpiochip(hw, pdev->dev.of_node);
+	err = mtk_build_gpiochip(hw);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add gpio_chip\n");
 		return err;
drivers/pinctrl/pinctrl-amd.c +0 -3
index ecab9064a845..1a7d686494ff 100644
@@ -1009,9 +1009,6 @@ static int amd_gpio_probe(struct platform_device *pdev)
 	gpio_dev->gc.owner			= THIS_MODULE;
 	gpio_dev->gc.parent			= &pdev->dev;
 	gpio_dev->gc.ngpio			= resource_size(res) / 4;
-#if defined(CONFIG_OF_GPIO)
-	gpio_dev->gc.of_node			= pdev->dev.of_node;
-#endif
 
 	gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
 	gpio_dev->groups = kerncz_groups;
drivers/pinctrl/pinctrl-at91-pio4.c +0 -1
index 03c32b2c5d30..fafd1f55cba7 100644
@@ -1136,7 +1136,6 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
 	}
 
 	atmel_pioctrl->gpio_chip = &atmel_gpio_chip;
-	atmel_pioctrl->gpio_chip->of_node = dev->of_node;
 	atmel_pioctrl->gpio_chip->ngpio = atmel_pioctrl->npins;
 	atmel_pioctrl->gpio_chip->label = dev_name(dev);
 	atmel_pioctrl->gpio_chip->parent = dev;
drivers/pinctrl/pinctrl-at91.c +0 -1
index 6022496bb6a9..d91a010e65f5 100644
@@ -1868,7 +1868,6 @@ static int at91_gpio_probe(struct platform_device *pdev)
 	at91_chip->chip = at91_gpio_template;
 
 	chip = &at91_chip->chip;
-	chip->of_node = np;
 	chip->label = dev_name(&pdev->dev);
 	chip->parent = &pdev->dev;
 	chip->owner = THIS_MODULE;
drivers/pinctrl/pinctrl-digicolor.c +2 -3
index ff702cfbaa28..cc3546fc4610 100644
@@ -233,7 +233,7 @@ static void dc_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	spin_unlock_irqrestore(&pmap->lock, flags);
 }
 
-static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
+static int dc_gpiochip_add(struct dc_pinmap *pmap)
 {
 	struct gpio_chip *chip = &pmap->chip;
 	int ret;
@@ -248,7 +248,6 @@ static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
 	chip->set		= dc_gpio_set;
 	chip->base		= -1;
 	chip->ngpio		= PINS_COUNT;
-	chip->of_node		= np;
 	chip->of_gpio_n_cells	= 2;
 
 	spin_lock_init(&pmap->lock);
@@ -326,7 +325,7 @@ static int dc_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(pmap->pctl);
 	}
 
-	return dc_gpiochip_add(pmap, pdev->dev.of_node);
+	return dc_gpiochip_add(pmap);
 }
 
 static const struct of_device_id dc_pinctrl_ids[] = {
drivers/pinctrl/pinctrl-mcp23s08.c +0 -1
index bccebe43dd6a..695236636d05 100644
@@ -551,7 +551,6 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	mcp->chip.set = mcp23s08_set;
 #ifdef CONFIG_OF_GPIO
 	mcp->chip.of_gpio_n_cells = 2;
-	mcp->chip.of_node = dev->of_node;
 #endif
 
 	mcp->chip.base = base;
drivers/pinctrl/pinctrl-ocelot.c +0 -1
index 42aab9ba049a..fc969208d904 100644
@@ -1748,7 +1748,6 @@ static int ocelot_gpiochip_register(struct platform_device *pdev,
 	gc->ngpio = info->desc->npins;
 	gc->parent = &pdev->dev;
 	gc->base = -1;
-	gc->of_node = info->dev->of_node;
 	gc->label = "ocelot-gpio";
 
 	irq = irq_of_parse_and_map(gc->of_node, 0);
drivers/pinctrl/pinctrl-oxnas.c +0 -1
index cebd810bd6d1..fb10a8473ebe 100644
@@ -1232,7 +1232,6 @@ static int oxnas_gpio_probe(struct platform_device *pdev)
 
 	bank->id = id;
 	bank->gpio_chip.parent = &pdev->dev;
-	bank->gpio_chip.of_node = np;
 	bank->gpio_chip.ngpio = ngpios;
 	girq = &bank->gpio_chip.irq;
 	girq->chip = &bank->irq_chip;
drivers/pinctrl/pinctrl-pic32.c +1 -1
index 748dabd8db6e..37acfdfc2cae 100644
@@ -2241,7 +2241,7 @@ static int pic32_gpio_probe(struct platform_device *pdev)
 	}
 
 	bank->gpio_chip.parent = &pdev->dev;
-	bank->gpio_chip.of_node = np;
+
 	girq = &bank->gpio_chip.irq;
 	girq->chip = &bank->irq_chip;
 	girq->parent_handler = pic32_gpio_irq_handler;
drivers/pinctrl/pinctrl-stmfx.c +0 -1
index 5fa2488fae87..ab4dde40d3ed 100644
@@ -675,7 +675,6 @@ static int stmfx_pinctrl_probe(struct platform_device *pdev)
 	pctl->gpio_chip.base = -1;
 	pctl->gpio_chip.ngpio = pctl->pctl_desc.npins;
 	pctl->gpio_chip.can_sleep = true;
-	pctl->gpio_chip.of_node = np;
 
 	pctl->irq_chip.name = dev_name(pctl->dev);
 	pctl->irq_chip.irq_mask = stmfx_pinctrl_irq_mask;
drivers/pinctrl/pinctrl-sx150x.c +0 -3
index 484a3b9e875c..a87ea3b95cf4 100644
@@ -1163,9 +1163,6 @@ static int sx150x_probe(struct i2c_client *client,
 	pctl->gpio.set = sx150x_gpio_set;
 	pctl->gpio.set_config = gpiochip_generic_config;
 	pctl->gpio.parent = dev;
-#ifdef CONFIG_OF_GPIO
-	pctl->gpio.of_node = dev->of_node;
-#endif
 	pctl->gpio.can_sleep = true;
 	pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
 	if (!pctl->gpio.label)
drivers/pinctrl/pinctrl-xway.c +0 -1
index 5e3f31b55eb7..3a03beb8a755 100644
@@ -1763,7 +1763,6 @@ static int pinmux_xway_probe(struct platform_device *pdev)
 	/* register the gpio chip */
 	xway_chip.parent = &pdev->dev;
 	xway_chip.owner = THIS_MODULE;
-	xway_chip.of_node = pdev->dev.of_node;
 	ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to register gpio chip\n");
drivers/pinctrl/qcom/pinctrl-msm.c +0 -1
index ae09e2dd8a50..780878dede9e 100644
@@ -1264,7 +1264,6 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
 	chip->label = dev_name(pctrl->dev);
 	chip->parent = pctrl->dev;
 	chip->owner = THIS_MODULE;
-	chip->of_node = pctrl->dev->of_node;
 	if (msm_gpio_needs_valid_mask(pctrl))
 		chip->init_valid_mask = msm_gpio_init_valid_mask;
 
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c +0 -1
index b5949f766a7a..1b41adda8129 100644
@@ -773,7 +773,6 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev)
 	pctrl->chip = pm8xxx_gpio_template;
 	pctrl->chip.base = -1;
 	pctrl->chip.parent = &pdev->dev;
-	pctrl->chip.of_node = pdev->dev.of_node;
 	pctrl->chip.of_gpio_n_cells = 2;
 	pctrl->chip.label = dev_name(pctrl->dev);
 	pctrl->chip.ngpio = pctrl->npins;
drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c +0 -1
index 842940594c4a..49893a5133a8 100644
@@ -857,7 +857,6 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev)
 	pctrl->chip = pm8xxx_mpp_template;
 	pctrl->chip.base = -1;
 	pctrl->chip.parent = &pdev->dev;
-	pctrl->chip.of_node = pdev->dev.of_node;
 	pctrl->chip.of_gpio_n_cells = 2;
 	pctrl->chip.label = dev_name(pctrl->dev);
 	pctrl->chip.ngpio = pctrl->npins;
drivers/pinctrl/renesas/pinctrl-rza2.c +0 -1
index 32829eb9656c..c0a04f1ee994 100644
@@ -240,7 +240,6 @@ static int rza2_gpio_register(struct rza2_pinctrl_priv *priv)
 	int ret;
 
 	chip.label = devm_kasprintf(priv->dev, GFP_KERNEL, "%pOFn", np);
-	chip.of_node = np;
 	chip.parent = priv->dev;
 	chip.ngpio = priv->npins;
 
drivers/pinctrl/spear/pinctrl-plgpio.c +0 -1
index b36449724f3f..ada401ef4342 100644
@@ -581,7 +581,6 @@ static int plgpio_probe(struct platform_device *pdev)
 	plgpio->chip.label = dev_name(&pdev->dev);
 	plgpio->chip.parent = &pdev->dev;
 	plgpio->chip.owner = THIS_MODULE;
-	plgpio->chip.of_node = pdev->dev.of_node;
 
 	if (!IS_ERR(plgpio->clk)) {
 		ret = clk_prepare(plgpio->clk);
drivers/pinctrl/vt8500/pinctrl-wmt.c +0 -1
index 65b97e240196..6fac30de1c6a 100644
@@ -565,7 +565,6 @@ int wmt_pinctrl_probe(struct platform_device *pdev,
 
 	data->gpio_chip = wmt_gpio_chip;
 	data->gpio_chip.parent = &pdev->dev;
-	data->gpio_chip.of_node = pdev->dev.of_node;
 	data->gpio_chip.ngpio = data->nbanks * 32;
 
 	platform_set_drvdata(pdev, data);
Signature · 1 line
2.33.0
#1 lore raw

PATCH v2 2/2 pinctrl: Propagate firmware node from a parent device

When creating MFD platform devices the firmware node is left unset. This, in particular, prevents GPIO library to use it for different purposes. Propagate firmware node from the parent device and let GPIO library do the right thing.

While at it, slightly modify the headers to reflect the usage of APIs.

---
v2: fixed compilation bug (LKP), due to above reshuffle headers in the rest

 drivers/pinctrl/cirrus/pinctrl-madera-core.c |  5 ++++-
 drivers/pinctrl/pinctrl-as3722.c             | 13 +++++++------
 drivers/pinctrl/pinctrl-da9062.c             |  6 +++---
 drivers/pinctrl/pinctrl-max77620.c           | 10 ++++++----
 drivers/pinctrl/pinctrl-rk805.c              | 12 ++++++------
 5 files changed, 26 insertions(+), 20 deletions(-)
drivers/pinctrl/cirrus/pinctrl-madera-core.c +4 -1
index dce2626384a9..e1cfbee3643a 100644
@@ -8,8 +8,10 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
@@ -1004,13 +1006,14 @@ static int madera_pin_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	priv->dev = &pdev->dev;
 	priv->madera = madera;
-	pdev->dev.of_node = madera->dev->of_node;
 
 	switch (madera->type) {
 	case CS47L15:
drivers/pinctrl/pinctrl-as3722.c +7 -6
index 13c193156363..5a175e3d7439 100644
@@ -23,19 +23,20 @@
 #include <linux/delay.h>
 #include <linux/gpio/driver.h>
 #include <linux/kernel.h>
+#include <linux/mod_device_table.h>
 #include <linux/module.h>
 #include <linux/mfd/as3722.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -551,12 +552,13 @@ static int as3722_pinctrl_probe(struct platform_device *pdev)
 	struct as3722_pctrl_info *as_pci;
 	int ret;
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	as_pci = devm_kzalloc(&pdev->dev, sizeof(*as_pci), GFP_KERNEL);
 	if (!as_pci)
 		return -ENOMEM;
 
 	as_pci->dev = &pdev->dev;
-	as_pci->dev->of_node = pdev->dev.parent->of_node;
 	as_pci->as3722 = dev_get_drvdata(pdev->dev.parent);
 	platform_set_drvdata(pdev, as_pci);
 
@@ -578,7 +580,6 @@ static int as3722_pinctrl_probe(struct platform_device *pdev)
 
 	as_pci->gpio_chip = as3722_gpio_chip;
 	as_pci->gpio_chip.parent = &pdev->dev;
-	as_pci->gpio_chip.of_node = pdev->dev.parent->of_node;
 	ret = gpiochip_add_data(&as_pci->gpio_chip, as_pci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Couldn't register gpiochip, %d\n", ret);
drivers/pinctrl/pinctrl-da9062.c +3 -3
index 1c08579f0198..0e0ac3f3ffef 100644
@@ -14,6 +14,7 @@
 #include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 
 #include <linux/gpio/driver.h>
@@ -256,6 +257,8 @@ static int da9062_pctl_probe(struct platform_device *pdev)
 	struct da9062_pctl *pctl;
 	int i;
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
 	if (!pctl)
 		return -ENOMEM;
@@ -277,9 +280,6 @@ static int da9062_pctl_probe(struct platform_device *pdev)
 	pctl->gc = reference_gc;
 	pctl->gc.label = dev_name(&pdev->dev);
 	pctl->gc.parent = &pdev->dev;
-#ifdef CONFIG_OF_GPIO
-	pctl->gc.of_node = parent->of_node;
-#endif
 
 	platform_set_drvdata(pdev, pctl);
 
drivers/pinctrl/pinctrl-max77620.c +6 -4
index c643ed43ebbf..132987340637 100644
@@ -11,13 +11,14 @@
 
 #include <linux/mfd/max77620.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -551,12 +552,13 @@ static int max77620_pinctrl_probe(struct platform_device *pdev)
 	struct max77620_pctrl_info *mpci;
 	int i;
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	mpci = devm_kzalloc(&pdev->dev, sizeof(*mpci), GFP_KERNEL);
 	if (!mpci)
 		return -ENOMEM;
 
 	mpci->dev = &pdev->dev;
-	mpci->dev->of_node = pdev->dev.parent->of_node;
 	mpci->rmap = max77620->rmap;
 
 	mpci->pins = max77620_pins_desc;
drivers/pinctrl/pinctrl-rk805.c +6 -6
index c6f4229eb106..7c1f7408fb9a 100644
@@ -13,17 +13,17 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mfd/rk808.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -420,18 +420,18 @@ static int rk805_pinctrl_probe(struct platform_device *pdev)
 	struct rk805_pctrl_info *pci;
 	int ret;
 
+	device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
 	pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL);
 	if (!pci)
 		return -ENOMEM;
 
 	pci->dev = &pdev->dev;
-	pci->dev->of_node = pdev->dev.parent->of_node;
 	pci->rk808 = dev_get_drvdata(pdev->dev.parent);
 
 	pci->pinctrl_desc = rk805_pinctrl_desc;
 	pci->gpio_chip = rk805_gpio_chip;
 	pci->gpio_chip.parent = &pdev->dev;
-	pci->gpio_chip.of_node = pdev->dev.parent->of_node;
 
 	platform_set_drvdata(pdev, pci);
 
Signature · 1 line
2.33.0
#2 lore raw

Re: [PATCH v2 2/2] pinctrl: Propagate firmware node from a parent device

Quoted 10 lines · Andy Shevchenko

When creating MFD platform devices the firmware node is left unset. This, in particular, prevents GPIO library to use it for different purposes. Propagate firmware node from the parent device and let GPIO library do the right thing.

While at it, slightly modify the headers to reflect the usage of APIs.

---
v2: fixed compilation bug (LKP), due to above reshuffle headers in the rest

...

Quoted 1 line

+#include <linux/mod_device_table.h>

He-h, updated code, updated bugs...

Linus, can you, please, apply the first patch if you have no objections, so I won't spam a lot of people again with no changes beneath?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#3 lore raw

Re: [PATCH v2 2/2] pinctrl: Propagate firmware node from a parent device

In reply to Andy Shevchenko
I love your patch! Yet something to improve:

Hi Andy,

I love your patch! Yet something to improve:

[auto build test ERROR on linusw-pinctrl/devel]
[cannot apply to geert-renesas-drivers/renesas-pinctrl v5.16-rc5] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Andy-Shevchenko/pinctrl-Get-rid-of-duplicate-of_node-assignment-in-the-drivers/20211214-210027
base:   https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
config: x86_64-randconfig-a012-20211214 (https://download.01.org/0day-ci/archive/20211214/202112142358.CrwPNZbA-lkp(a)intel.com/config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project b6a2ddb6c8ac29412b1361810972e15221fa021c)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/fb259425f395e043cd3ef074641937e28d0cffb9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Andy-Shevchenko/pinctrl-Get-rid-of-duplicate-of_node-assignment-in-the-drivers/20211214-210027 git checkout fb259425f395e043cd3ef074641937e28d0cffb9
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

>> drivers/pinctrl/pinctrl-max77620.c:649:64: error: array has incomplete element type 'const struct platform_device_id'
   static const struct platform_device_id max77620_pinctrl_devtype[] = {
                                                                  ^
   include/linux/platform_device.h:21:8: note: forward declaration of 'struct platform_device_id'
   struct platform_device_id;
          ^

1 error generated.

vim +649 drivers/pinctrl/pinctrl-max77620.c

2df723d49cdafb6 Laxman Dewangan 2016-05-13 648

2df723d49cdafb6 Laxman Dewangan 2016-05-13 @649  static const struct platform_device_id max77620_pinctrl_devtype[] = {
2df723d49cdafb6 Laxman Dewangan 2016-05-13  650  	{ .name = "max77620-pinctrl", },
2df723d49cdafb6 Laxman Dewangan 2016-05-13  651  	{ .name = "max20024-pinctrl", },
2df723d49cdafb6 Laxman Dewangan 2016-05-13  652  	{},
2df723d49cdafb6 Laxman Dewangan 2016-05-13  653  };
2df723d49cdafb6 Laxman Dewangan 2016-05-13  654  MODULE_DEVICE_TABLE(platform, max77620_pinctrl_devtype);

2df723d49cdafb6 Laxman Dewangan 2016-05-13 655

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#4 lore raw

Re: [PATCH v2 2/2] pinctrl: Propagate firmware node from a parent device

In reply to Andy Shevchenko
Quoted 5 lines · Andy Shevchenko

When creating MFD platform devices the firmware node is left unset. This, in particular, prevents GPIO library to use it for different purposes. Propagate firmware node from the parent device and let GPIO library do the right thing.

I came across the same thing this week. By populating the of_compatible field of the mfd_cell, the child device will have the appropriate firmware node populated. Unfortunately that currently means that I'll have to put every device type in the MFD instead of in an of_match_table in the child driver itself. Figuring that out is one of the next things on my list.

#5 lore raw
In reply to Andy Shevchenko
Quoted 9 lines · Andy Shevchenko

GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

---
v2: no changes

Applied this patch 1/2 of the v2 patch set!

Yours,
Linus Walleij