4.19.222-rc1 review

This is the start of the stable review cycle for the 4.19.222 release. There are 56 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.222-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.222-rc1

Juergen Gross <[email protected]>
xen/netback: don't queue unlimited number of packages

Juergen Gross <[email protected]>
xen/netback: fix rx queue stall detection

Juergen Gross <[email protected]>
xen/console: harden hvc_xen against event channel storms

Juergen Gross <[email protected]>
xen/netfront: harden netfront against event channel storms

Juergen Gross <[email protected]>
xen/blkfront: harden blkfront against event channel storms

George Kennedy <[email protected]>
scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

Miklos Szeredi <[email protected]>
ovl: fix warning in ovl_create_real()

Miklos Szeredi <[email protected]>
fuse: annotate lock in fuse_reverse_inval_entry()

Pavel Skripkin <[email protected]>
media: mxl111sf: change mutex_init() location

Fabio Estevam <[email protected]>
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name

Sudeep Holla <[email protected]>
firmware: arm_scpi: Fix string overflow in SCPI genpd driver

Nathan Chancellor <[email protected]>
Input: touchscreen - avoid bitwise vs logical OR warning

Stefan Agner <[email protected]>
ARM: 8800/1: use choice for kernel unwinders

Nathan Chancellor <[email protected]>
mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO

Nicolas Pitre <[email protected]>
ARM: 8805/2: remove unneeded naked function usage

Nathan Chancellor <[email protected]>
net: lan78xx: Avoid unnecessary self assignment

Johannes Berg <[email protected]>
mac80211: validate extended element ID is present

Florian Fainelli <[email protected]>
net: systemport: Add global locking for descriptor lifecycle

Le Ma <[email protected]>
drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE

George Kennedy <[email protected]>
libata: if T_LENGTH is zero, dma direction should be DMA_NONE

Yu Liao <[email protected]>
timekeeping: Really make sure wall_to_monotonic isn't positive

Daniele Palmas <[email protected]>
USB: serial: option: add Telit FN990 compositions

Johan Hovold <[email protected]>

    USB: serial: cp210x: fix CP2105 GPIO registration

Stefan Roese <[email protected]>
PCI/MSI: Mask MSI-X vectors only on success

Thomas Gleixner <[email protected]>
PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error

Jimmy Wang <[email protected]>
USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)

Greg Kroah-Hartman <[email protected]>
USB: gadget: bRequestType is a bitfield, not a enum

Eric Dumazet <[email protected]>
sit: do not call ipip6_dev_free() from sit_init_net()

Willem de Bruijn <[email protected]>
net/packet: rx_owner_map depends on pg_vec

Haimin Zhang <[email protected]>
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc

Cyril Novikov <[email protected]>
ixgbe: set X550 MDIO speed before talking to PHY

Letu Ren <[email protected]>
igbvf: fix double free in igbvf_probe

Karen Sornek <[email protected]>
igb: Fix removal of unicast MAC filters of VFs

Nathan Chancellor <[email protected]>
soc/tegra: fuse: Fix bitwise vs. logical OR warning

Hangyu Hua <[email protected]>
rds: memory leak in __rds_conn_create()

Alyssa Ross <[email protected]>
dmaengine: st_fdma: fix MODULE_ALIAS

Eric Dumazet <[email protected]>
sch_cake: do not call cake_destroy() from cake_init()

Dinh Nguyen <[email protected]>
ARM: socfpga: dts: fix qspi node compatible

Randy Dunlap <[email protected]>
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build

Johannes Berg <[email protected]>
mac80211: track only QoS data frames for admission control

Tom Lendacky <[email protected]>
x86/sme: Explicitly map new EFI memmap table as encrypted

Ard Biesheuvel <[email protected]>
x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol

J. Bruce Fields <[email protected]>
nfsd: fix use-after-free due to delegation race

Paul Moore <[email protected]>
audit: improve robustness of the audit queue handling

Joe Thornber <[email protected]>
dm btree remove: fix use after free in rebalance_children()

Jerome Marchand <[email protected]>
recordmcount.pl: look for jgnop instruction as well as bcrl on s390

Felix Fietkau <[email protected]>
mac80211: send ADDBA requests using the tid/queue of the aggregation session

Armin Wolf <[email protected]>
hwmon: (dell-smm) Fix warning on /proc/i8k creation error

Chen Jun <[email protected]>
tracing: Fix a kmemleak false positive in tracing_map

Harshit Mogalapalli <[email protected]>
net: netlink: af_netlink: Prevent empty skb by adding a check on len.

Ondrej Jirman <[email protected]>
i2c: rk3x: Handle a spurious start completion interrupt flag

Helge Deller <[email protected]>
parisc/agp: Annotate parisc agp init functions with __init

Erik Ekman <[email protected]>
net/mlx4_en: Update reported link modes for 1/10G

Philip Chen <[email protected]>
drm/msm/dsi: set default num_data_lanes

Tadeusz Struk <[email protected]>
nfc: fix segfault in nfc_genl_dump_devices_done

Sasha Levin <[email protected]>
stable: clamp SUBLEVEL in 4.19

-------------

Diffstat:

 Makefile                                           |   6 +-
 arch/Kconfig                                       |   3 +
 arch/arm/Kconfig.debug                             |  44 +++++---
 arch/arm/boot/dts/imx6ull-pinfunc.h                |   2 +-
 arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts   |   2 +-
 arch/arm/boot/dts/socfpga_arria5_socdk.dts         |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socdk.dts       |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sockit.dts      |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socrates.dts    |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts       |   2 +-
 arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts |   4 +-
 arch/arm/mm/copypage-fa.c                          |  35 +++---
 arch/arm/mm/copypage-feroceon.c                    |  98 ++++++++--------
 arch/arm/mm/copypage-v4mc.c                        |  19 ++--
 arch/arm/mm/copypage-v4wb.c                        |  41 ++++---
 arch/arm/mm/copypage-v4wt.c                        |  37 +++---
 arch/arm/mm/copypage-xsc3.c                        |  71 +++++-------
 arch/arm/mm/copypage-xscale.c                      |  71 ++++++------
 arch/x86/Kconfig                                   |   6 +-
 arch/x86/mm/ioremap.c                              |   4 +-
 arch/x86/platform/efi/quirks.c                     |   3 +-
 drivers/ata/libata-scsi.c                          |  15 ++-
 drivers/block/xen-blkfront.c                       |  15 ++-
 drivers/char/agp/parisc-agp.c                      |   6 +-
 drivers/dma/st_fdma.c                              |   2 +-
 drivers/firmware/scpi_pm_domain.c                  |  10 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |   4 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c                 |   2 +
 drivers/hv/Kconfig                                 |   1 +
 drivers/hwmon/dell-smm-hwmon.c                     |   7 +-
 drivers/i2c/busses/i2c-rk3x.c                      |   4 +-
 drivers/input/touchscreen/of_touchscreen.c         |  18 +--
 drivers/md/persistent-data/dm-btree-remove.c       |   2 +-
 drivers/media/usb/dvb-usb-v2/mxl111sf.c            |  16 ++-
 drivers/net/ethernet/broadcom/bcmsysport.c         |   5 +
 drivers/net/ethernet/broadcom/bcmsysport.h         |   1 +
 drivers/net/ethernet/intel/igb/igb_main.c          |  28 ++---
 drivers/net/ethernet/intel/igbvf/netdev.c          |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c      |   3 +
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c    |   6 +-
 drivers/net/netdevsim/bpf.c                        |   1 +
 drivers/net/usb/lan78xx.c                          |   6 +-
 drivers/net/wireless/marvell/mwifiex/cmdevt.c      |   4 +-
 drivers/net/wireless/marvell/mwifiex/fw.h          |   8 +-
 drivers/net/xen-netback/common.h                   |   1 +
 drivers/net/xen-netback/rx.c                       |  77 ++++++++-----
 drivers/net/xen-netfront.c                         | 125 ++++++++++++++++-----
 drivers/pci/msi.c                                  |  15 ++-
 drivers/scsi/scsi_debug.c                          |   4 +-
 drivers/soc/tegra/fuse/fuse-tegra.c                |   2 +-
 drivers/soc/tegra/fuse/fuse.h                      |   2 +-
 drivers/tty/hvc/hvc_xen.c                          |  30 ++++-
 drivers/usb/core/quirks.c                          |   3 +
 drivers/usb/gadget/composite.c                     |   6 +-
 drivers/usb/gadget/legacy/dbgp.c                   |   6 +-
 drivers/usb/gadget/legacy/inode.c                  |   6 +-
 drivers/usb/serial/cp210x.c                        |   6 +-
 drivers/usb/serial/option.c                        |   8 ++
 fs/fuse/dir.c                                      |   2 +-
 fs/nfsd/nfs4state.c                                |   9 +-
 fs/overlayfs/dir.c                                 |   3 +-
 fs/overlayfs/overlayfs.h                           |   1 +
 fs/overlayfs/super.c                               |  12 +-
 kernel/audit.c                                     |  21 ++--
 kernel/time/timekeeping.c                          |   3 +-
 kernel/trace/tracing_map.c                         |   3 +
 lib/Kconfig.debug                                  |   6 +-
 net/ipv6/sit.c                                     |   1 -
 net/mac80211/agg-tx.c                              |   2 +-
 net/mac80211/mlme.c                                |  13 ++-
 net/mac80211/util.c                                |   2 +
 net/netlink/af_netlink.c                           |   5 +
 net/nfc/netlink.c                                  |   6 +-
 net/packet/af_packet.c                             |   5 +-
 net/rds/connection.c                               |   1 +
 net/sched/sch_cake.c                               |   6 +-
 scripts/recordmcount.pl                            |   2 +-
 77 files changed, 608 insertions(+), 407 deletions(-)

From: Sasha Levin <[email protected]>

In a few months, SUBLEVEL will overflow, and some userspace may start treating 4.19.256 as 4.20. While out of tree modules have different ways of extracting the version number (and we're generally ok with breaking them), we do care about breaking userspace and it would appear that this overflow might do just that.

Our rules around userspace ABI in the stable kernel are pretty simple:
we don't break it. Thus, while userspace may be checking major/minor, it shouldn't be doing anything with sublevel.

This patch applies a big band-aid to the 4.19 kernel in the form of clamping the sublevel to 255.

The clamp is done for the purpose of LINUX_VERSION_CODE only, and extracting the version number from the Makefile or "make kernelversion" will continue to work as intended.

We might need to do it later in newer trees, but maybe we'll have a better solution by then, so I'm ignoring that problem for now.

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1158,7 +1158,7 @@ endef
 
 define filechk_version.h
 	(echo \#define LINUX_VERSION_CODE $(shell                         \
-	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 255); \
 	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 endef
 

From: Tadeusz Struk <[email protected]>

commit fd79a0cbf0b2e34bcc45b13acf962e2032a82203 upstream.

When kmalloc in nfc_genl_dump_devices() fails then nfc_genl_dump_devices_done() segfaults as below

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:
<TASK>
class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80

---
 net/nfc/netlink.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -655,8 +655,10 @@ static int nfc_genl_dump_devices_done(st
 {
 	struct class_dev_iter *iter = (struct class_dev_iter *) cb->args[0];
 
-	nfc_device_iter_exit(iter);
-	kfree(iter);
+	if (iter) {
+		nfc_device_iter_exit(iter);
+		kfree(iter);
+	}
 
 	return 0;
 }

From: Philip Chen <[email protected]>

[ Upstream commit cd92cc187c053ab010a1570e2d61d68394a5c725 ]

If "data_lanes" property of the dsi output endpoint is missing in the DT, num_data_lanes would be 0 by default, which could cause dsi_host_attach() to fail if dsi->lanes is set to a non-zero value by the bridge driver.

According to the binding document of msm dsi controller, the input/output endpoint of the controller is expected to have 4 lanes. So let's set num_data_lanes to 4 by default.

---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 2 ++
 1 file changed, 2 insertions(+)

index 77dae147caf90..9abfb19ea7ede 100644
@@ -1677,6 +1677,8 @@ static int dsi_host_parse_lane_data(struct msm_dsi_host *msm_host,
 	if (!prop) {
 		dev_dbg(dev,
 			"failed to find data lane mapping, using default\n");
+		/* Set the number of date lanes to 4 by default. */
+		msm_host->num_data_lanes = 4;
 		return 0;
 	}
 

2.33.0

From: Erik Ekman <[email protected]>

[ Upstream commit 2191b1dfef7d45f44b5008d2148676d9f2c82874 ]

When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available.

Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes").

Tested with MCX311A-XCAT connected via DAC.
Before:

% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No
Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full
10000baseKR/Full
Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes

With this change:

% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseX/Full
10000baseCR/Full 10000baseSR/Full
Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No
Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full
10000baseCR/Full 10000baseSR/Full
Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes

---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 6a005014d46af..f652cfd8127bf 100644
@@ -663,7 +663,7 @@ void __init mlx4_en_init_ptys2ethtool_map(void)
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_T, SPEED_1000,
 				       ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_CX_SGMII, SPEED_1000,
-				       ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
+				       ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_KX, SPEED_1000,
 				       ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_T, SPEED_10000,

@@ -675,9 +675,9 @@ void __init mlx4_en_init_ptys2ethtool_map(void)
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_KR, SPEED_10000,
 				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_CR, SPEED_10000,
-				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
+				       ETHTOOL_LINK_MODE_10000baseCR_Full_BIT);
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_SR, SPEED_10000,
-				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
+				       ETHTOOL_LINK_MODE_10000baseSR_Full_BIT);
 	MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_20GBASE_KR2, SPEED_20000,
 				       ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT,
 				       ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT);

2.33.0

From: Helge Deller <[email protected]>

[ Upstream commit 8d88382b7436551a9ebb78475c546b670790cbf6 ]

---
 drivers/char/agp/parisc-agp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 15f2e7025b78e..1d5510cb6db4e 100644
@@ -285,7 +285,7 @@ agp_ioc_init(void __iomem *ioc_regs)
         return 0;
 }
 
-static int
+static int __init
 lba_find_capability(int cap)
 {
 	struct _parisc_agp_info *info = &parisc_agp_info;

@@ -370,7 +370,7 @@ parisc_agp_setup(void __iomem *ioc_hpa, void __iomem *lba_hpa)
 	return error;
 }
 
-static int
+static int __init
 find_quicksilver(struct device *dev, void *data)
 {
 	struct parisc_device **lba = data;

@@ -382,7 +382,7 @@ find_quicksilver(struct device *dev, void *data)
 	return 0;
 }
 
-static int
+static int __init
 parisc_agp_init(void)
 {
 	extern struct sba_device *sba_list;

2.33.0

From: Ondrej Jirman <[email protected]>

[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ]

In a typical read transfer, start completion flag is being set after read finishes (notice ipd bit 4 being set):

trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33

This causes I2C transfer being aborted in polled mode from a stop completion handler:

trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0 rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13 i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10

Clearing the START flag after read fixes the issue without any obvious side effects.

This issue was dicovered on RK3566 when adding support for powering off the RK817 PMIC.

---
 drivers/i2c/busses/i2c-rk3x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index b8a2728dd4b69..e76ad020a5420 100644
@@ -425,8 +425,8 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
 	if (!(ipd & REG_INT_MBRF))
 		return;
 
-	/* ack interrupt */
-	i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
+	/* ack interrupt (read also produces a spurious START flag, clear it too) */
+	i2c_writel(i2c, REG_INT_MBRF | REG_INT_START, REG_IPD);
 
 	/* Can only handle a maximum of 32 bytes at a time */
 	if (len > 32)

2.33.0

From: Harshit Mogalapalli <[email protected]>

[ Upstream commit f123cffdd8fe8ea6c7fded4b88516a42798797d0 ]

Adding a check on len parameter to avoid empty skb. This prevents a division error in netem_enqueue function which is caused when skb->len=0 and skb->data_len=0 in the randomized corruption step as shown below.

skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8);

Crash Report:

[  343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family
0 port 6081 - 0
[  343.216110] netem: version 1.3
[  343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
[  343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+
[  343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-2.el7 04/01/2014
[  343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.247291] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.248350] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.250076] Call Trace:
[  343.250423]  <TASK>
[  343.250713]  ? memcpy+0x4d/0x60
[  343.251162]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.251795]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.252443]  netem_enqueue+0xe28/0x33c0 [sch_netem]
[  343.253102]  ? stack_trace_save+0x87/0xb0
[  343.253655]  ? filter_irq_stacks+0xb0/0xb0
[  343.254220]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.254837]  ? __kasan_check_write+0x14/0x20
[  343.255418]  ? _raw_spin_lock+0x88/0xd6
[  343.255953]  dev_qdisc_enqueue+0x50/0x180
[  343.256508]  __dev_queue_xmit+0x1a7e/0x3090
[  343.257083]  ? netdev_core_pick_tx+0x300/0x300
[  343.257690]  ? check_kcov_mode+0x10/0x40
[  343.258219]  ? _raw_spin_unlock_irqrestore+0x29/0x40
[  343.258899]  ? __kasan_init_slab_obj+0x24/0x30
[  343.259529]  ? setup_object.isra.71+0x23/0x90
[  343.260121]  ? new_slab+0x26e/0x4b0
[  343.260609]  ? kasan_poison+0x3a/0x50
[  343.261118]  ? kasan_unpoison+0x28/0x50
[  343.261637]  ? __kasan_slab_alloc+0x71/0x90
[  343.262214]  ? memcpy+0x4d/0x60
[  343.262674]  ? write_comp_data+0x2f/0x90
[  343.263209]  ? __kasan_check_write+0x14/0x20
[  343.263802]  ? __skb_clone+0x5d6/0x840
[  343.264329]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.264958]  dev_queue_xmit+0x1c/0x20
[  343.265470]  netlink_deliver_tap+0x652/0x9c0
[  343.266067]  netlink_unicast+0x5a0/0x7f0
[  343.266608]  ? netlink_attachskb+0x860/0x860
[  343.267183]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.267820]  ? write_comp_data+0x2f/0x90
[  343.268367]  netlink_sendmsg+0x922/0xe80
[  343.268899]  ? netlink_unicast+0x7f0/0x7f0
[  343.269472]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.270099]  ? write_comp_data+0x2f/0x90
[  343.270644]  ? netlink_unicast+0x7f0/0x7f0
[  343.271210]  sock_sendmsg+0x155/0x190
[  343.271721]  ____sys_sendmsg+0x75f/0x8f0
[  343.272262]  ? kernel_sendmsg+0x60/0x60
[  343.272788]  ? write_comp_data+0x2f/0x90
[  343.273332]  ? write_comp_data+0x2f/0x90
[  343.273869]  ___sys_sendmsg+0x10f/0x190
[  343.274405]  ? sendmsg_copy_msghdr+0x80/0x80
[  343.274984]  ? slab_post_alloc_hook+0x70/0x230
[  343.275597]  ? futex_wait_setup+0x240/0x240
[  343.276175]  ? security_file_alloc+0x3e/0x170
[  343.276779]  ? write_comp_data+0x2f/0x90
[  343.277313]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.277969]  ? write_comp_data+0x2f/0x90
[  343.278515]  ? __fget_files+0x1ad/0x260
[  343.279048]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.279685]  ? write_comp_data+0x2f/0x90
[  343.280234]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.280874]  ? sockfd_lookup_light+0xd1/0x190
[  343.281481]  __sys_sendmsg+0x118/0x200
[  343.281998]  ? __sys_sendmsg_sock+0x40/0x40
[  343.282578]  ? alloc_fd+0x229/0x5e0
[  343.283070]  ? write_comp_data+0x2f/0x90
[  343.283610]  ? write_comp_data+0x2f/0x90
[  343.284135]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.284776]  ? ktime_get_coarse_real_ts64+0xb8/0xf0
[  343.285450]  __x64_sys_sendmsg+0x7d/0xc0
[  343.285981]  ? syscall_enter_from_user_mode+0x4d/0x70
[  343.286664]  do_syscall_64+0x3a/0x80
[  343.287158]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  343.287850] RIP: 0033:0x7fdde24cf289
[  343.288344] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00
48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 db 2c 00 f7 d8 64 89 01 48
[  343.290729] RSP: 002b:00007fdde2bd6d98 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[  343.291730] RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007fdde24cf289
[  343.292673] RDX: 0000000000000000 RSI: 00000000200000c0 RDI:
0000000000000004
[  343.293618] RBP: 00007fdde2bd6e20 R08: 0000000100000001 R09:
0000000000000000
[  343.294557] R10: 0000000100000001 R11: 0000000000000246 R12:
0000000000000000
[  343.295493] R13: 0000000000021000 R14: 0000000000000000 R15:
00007fdde2bd7700
[  343.296432]  </TASK>
[  343.296735] Modules linked in: sch_netem ip6_vti ip_vti ip_gre ipip

sit ip_tunnel geneve macsec macvtap tap ipvlan macvlan 8021q garp mrp hsr wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel libblake2s blake2s_x86_64 libblake2s_generic curve25519_x86_64 libcurve25519_generic libchacha xfrm_interface xfrm6_tunnel tunnel4 veth netdevsim psample batman_adv nlmon dummy team bonding tls vcan ip6_gre ip6_tunnel tunnel6 gre tun ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set ebtable_nat ebtable_broute ip6table_nat ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_security iptable_raw ebtable_filter ebtables rfkill ip6table_filter ip6_tables iptable_filter ppdev bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper cec parport_pc drm joydev floppy parport sg syscopyarea sysfillrect sysimgblt i2c_piix4 qemu_fw_cfg fb_sys_fops pcspkr

[  343.297459]  ip_tables xfs virtio_net net_failover failover sd_mod
sr_mod cdrom t10_pi ata_generic pata_acpi ata_piix libata virtio_pci
virtio_pci_legacy_dev serio_raw virtio_pci_modern_dev dm_mirror
dm_region_hash dm_log dm_mod
[  343.311074] Dumping ftrace buffer:
[  343.311532]    (ftrace buffer empty)
[  343.312040] ---[ end trace a2e3db5a6ae05099 ]---
[  343.312691] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.313481] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.315893] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.316622] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.317585] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.318549] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.319503] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.320455] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.321414] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.322489] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.323283] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.324264] Kernel panic - not syncing: Fatal exception in interrupt
[  343.333717] Dumping ftrace buffer:
[  343.334175]    (ftrace buffer empty)
[  343.334653] Kernel Offset: 0x13600000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  343.336027] Rebooting in 86400 seconds..

---
 net/netlink/af_netlink.c | 5 +++++
 1 file changed, 5 insertions(+)

index dd4e4289d0d2a..a7497361e4d78 100644
@@ -1853,6 +1853,11 @@ static int netlink_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	if (msg->msg_flags&MSG_OOB)
 		return -EOPNOTSUPP;
 
+	if (len == 0) {
+		pr_warn_once("Zero length message leads to an empty skb\n");
+		return -ENODATA;
+	}
+
 	err = scm_send(sock, msg, &scm, true);
 	if (err < 0)
 		return err;

2.33.0

From: Chen Jun <[email protected]>

[ Upstream commit f25667e5980a4333729cac3101e5de1bb851f71a ]

Doing the command:
echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger

Triggers many kmemleak reports:

unreferenced object 0xffff0000c7ea4980 (size 128):
comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
    [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
    [<00000000633bd154>] tracing_map_init+0x1f8/0x268
    [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
    [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
    [<00000000f549355a>] event_trigger_write+0x7c/0x120
    [<00000000b80f898d>] vfs_write+0xc4/0x380
    [<00000000823e1055>] ksys_write+0x74/0xf8
    [<000000008a9374aa>] __arm64_sys_write+0x24/0x30
    [<0000000087124017>] do_el0_svc+0x88/0x1c0
    [<00000000efd0dcd1>] el0_svc+0x1c/0x28
    [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
    [<00000000e7399680>] el0_sync+0x148/0x180
unreferenced object 0xffff0000c7ea4980 (size 128):
  comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
    [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
    [<00000000633bd154>] tracing_map_init+0x1f8/0x268
    [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
    [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
    [<00000000f549355a>] event_trigger_write+0x7c/0x120
    [<00000000b80f898d>] vfs_write+0xc4/0x380
    [<00000000823e1055>] ksys_write+0x74/0xf8
    [<000000008a9374aa>] __arm64_sys_write+0x24/0x30
    [<0000000087124017>] do_el0_svc+0x88/0x1c0
    [<00000000efd0dcd1>] el0_svc+0x1c/0x28
    [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
    [<00000000e7399680>] el0_sync+0x148/0x180

The reason is elts->pages[i] is alloced by get_zeroed_page. and kmemleak will not scan the area alloced by get_zeroed_page. The address stored in elts->pages will be regarded as leaked.

That is, the elts->pages[i] will have pointers loaded onto it as well, and without telling kmemleak about it, those pointers will look like memory without a reference.

To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i]

---
 kernel/trace/tracing_map.c | 3 +++
 1 file changed, 3 insertions(+)

index 10657b8dc2c2d..83c2a0598c648 100644
@@ -15,6 +15,7 @@
 #include <linux/jhash.h>
 #include <linux/slab.h>
 #include <linux/sort.h>
+#include <linux/kmemleak.h>
 
 #include "tracing_map.h"
 #include "trace.h"

@@ -307,6 +308,7 @@ void tracing_map_array_free(struct tracing_map_array *a)
 	for (i = 0; i < a->n_pages; i++) {
 		if (!a->pages[i])
 			break;
+		kmemleak_free(a->pages[i]);
 		free_page((unsigned long)a->pages[i]);
 	}
 

@@ -342,6 +344,7 @@ struct tracing_map_array *tracing_map_array_alloc(unsigned int n_elts,
 		a->pages[i] = (void *)get_zeroed_page(GFP_KERNEL);
 		if (!a->pages[i])
 			goto free;
+		kmemleak_alloc(a->pages[i], PAGE_SIZE, 1, GFP_KERNEL);
 	}
  out:
 	return a;

2.33.0

From: Armin Wolf <[email protected]>

commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream.

The removal function is called regardless of whether /proc/i8k was created successfully or not, the later causing a WARN() on module removal.
Fix that by only registering the removal function if /proc/i8k was created successfully.

Tested on a Inspiron 3505.

---
 drivers/hwmon/dell-smm-hwmon.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -591,15 +591,18 @@ static const struct file_operations i8k_
 	.unlocked_ioctl	= i8k_ioctl,
 };
 
+static struct proc_dir_entry *entry;
+
 static void __init i8k_init_procfs(void)
 {
 	/* Register the proc entry */
-	proc_create("i8k", 0, NULL, &i8k_fops);
+	entry = proc_create("i8k", 0, NULL, &i8k_fops);
 }
 
 static void __exit i8k_exit_procfs(void)
 {
-	remove_proc_entry("i8k", NULL);
+	if (entry)
+		remove_proc_entry("i8k", NULL);
 }
 
 #else

From: Felix Fietkau <[email protected]>

commit 1fe98f5690c4219d419ea9cc190f94b3401cf324 upstream.

Sending them out on a different queue can cause a race condition where a number of packets in the queue may be discarded by the receiver, because the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate packet seqno in hardware on tx, regardless of whether iTXQ is used or not. The only driver I've seen that explicitly deals with this issue internally is mwl8k.

---
 net/mac80211/agg-tx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -109,7 +109,7 @@ static void ieee80211_send_addba_request
 	mgmt->u.action.u.addba_req.start_seq_num =
 					cpu_to_le16(start_seq_num << 4);
 
-	ieee80211_tx_skb(sdata, skb);
+	ieee80211_tx_skb_tid(sdata, skb, tid);
 }
 
 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)

From: Jerome Marchand <[email protected]>

commit 85bf17b28f97ca2749968d8786dc423db320d9c2 upstream.

On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in the objdump -d outpout. However since binutils 2.37, objdump -d display "jgnop <xxx>" for the same instruction. Update the mcount_regex so that it accepts both.

---
 scripts/recordmcount.pl |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -252,7 +252,7 @@ if ($arch eq "x86_64") {
 
 } elsif ($arch eq "s390" && $bits == 64) {
     if ($cc =~ /-DCC_USING_HOTPATCH/) {
-	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*brcl\\s*0,[0-9a-f]+ <([^\+]*)>\$";
+	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*(bcrl\\s*0,|jgnop\\s*)[0-9a-f]+ <([^\+]*)>\$";
 	$mcount_adjust = 0;
     } else {
 	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";

From: Joe Thornber <[email protected]>

commit 1b8d2789dad0005fd5e7d35dab26a8e1203fb6da upstream.

Move dm_tm_unlock() after dm_tm_dec().

---
 drivers/md/persistent-data/dm-btree-remove.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -423,9 +423,9 @@ static int rebalance_children(struct sha
 
 		memcpy(n, dm_block_data(child),
 		       dm_bm_block_size(dm_tm_get_bm(info->tm)));
-		dm_tm_unlock(info->tm, child);
 
 		dm_tm_dec(info->tm, dm_block_location(child));
+		dm_tm_unlock(info->tm, child);
 		return 0;
 	}
 

From: Paul Moore <[email protected]>

commit f4b3ee3c85551d2d343a3ba159304066523f730f upstream.

If the audit daemon were ever to get stuck in a stopped state the kernel's kauditd_thread() could get blocked attempting to send audit records to the userspace audit daemon. With the kernel thread blocked it is possible that the audit queue could grow unbounded as certain audit record generating events must be exempt from the queue limits else the system enter a deadlock state.

This patch resolves this problem by lowering the kernel thread's socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks the kauditd_send_queue() function to better manage the various audit queues when connection problems occur between the kernel and the audit daemon. With this patch, the backlog may temporarily grow beyond the defined limits when the audit daemon is stopped and the system is under heavy audit pressure, but kauditd_thread() will continue to make progress and drain the queues as it would for other connection problems. For example, with the audit daemon put into a stopped state and the system configured to audit every syscall it was still possible to shutdown the system without a kernel panic, deadlock, etc.; granted, the system was slow to shutdown but that is to be expected given the extreme pressure of recording every syscall.

The timeout value of HZ/10 was chosen primarily through experimentation and this developer's "gut feeling". There is likely no one perfect value, but as this scenario is limited in scope (root privileges would be needed to send SIGSTOP to the audit daemon), it is likely not worth exposing this as a tunable at present. This can always be done at a later date if it proves necessary.

---
 kernel/audit.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

@@ -726,7 +726,7 @@ static int kauditd_send_queue(struct soc
 {
 	int rc = 0;
 	struct sk_buff *skb;
-	static unsigned int failed = 0;
+	unsigned int failed = 0;
 
 	/* NOTE: kauditd_thread takes care of all our locking, we just use
 	 *       the netlink info passed to us (e.g. sk and portid) */

@@ -743,32 +743,30 @@ static int kauditd_send_queue(struct soc
 			continue;
 		}
 
+retry:
 		/* grab an extra skb reference in case of error */
 		skb_get(skb);
 		rc = netlink_unicast(sk, skb, portid, 0);
 		if (rc < 0) {
-			/* fatal failure for our queue flush attempt? */
+			/* send failed - try a few times unless fatal error */
 			if (++failed >= retry_limit ||
 			    rc == -ECONNREFUSED || rc == -EPERM) {
-				/* yes - error processing for the queue */
 				sk = NULL;
 				if (err_hook)
 					(*err_hook)(skb);
-				if (!skb_hook)
-					goto out;
-				/* keep processing with the skb_hook */
+				if (rc == -EAGAIN)
+					rc = 0;
+				/* continue to drain the queue */
 				continue;
 			} else
-				/* no - requeue to preserve ordering */
-				skb_queue_head(queue, skb);
+				goto retry;
 		} else {
-			/* it worked - drop the extra reference and continue */
+			/* skb sent - drop the extra reference and continue */
 			consume_skb(skb);
 			failed = 0;
 		}
 	}
 
-out:
 	return (rc >= 0 ? 0 : rc);
 }
 

@@ -1557,7 +1555,8 @@ static int __net_init audit_net_init(str
 		audit_panic("cannot initialize netlink socket in namespace");
 		return -ENOMEM;
 	}
-	aunet->sk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT;
+	/* limit the timeout in case auditd is blocked/stopped */
+	aunet->sk->sk_sndtimeo = HZ / 10;
 
 	return 0;
 }

From: J. Bruce Fields <[email protected]>

commit 548ec0805c399c65ed66c6641be467f717833ab5 upstream.

A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru.

Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread.

I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning.

[Salvatore Bonaccorso: Backport for context changes to versions which do not have 20b7d86f29d3 ("nfsd: use boottime for lease expiry calculation")]

---
 fs/nfsd/nfs4state.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -975,6 +975,11 @@ hash_delegation_locked(struct nfs4_deleg
 	return 0;
 }
 
+static bool delegation_hashed(struct nfs4_delegation *dp)
+{
+	return !(list_empty(&dp->dl_perfile));
+}
+
 static bool
 unhash_delegation_locked(struct nfs4_delegation *dp)
 {

@@ -982,7 +987,7 @@ unhash_delegation_locked(struct nfs4_del
 
 	lockdep_assert_held(&state_lock);
 
-	if (list_empty(&dp->dl_perfile))
+	if (!delegation_hashed(dp))
 		return false;
 
 	dp->dl_stid.sc_type = NFS4_CLOSED_DELEG_STID;

@@ -3912,7 +3917,7 @@ static void nfsd4_cb_recall_prepare(stru
 	 * queued for a lease break. Don't queue it again.
 	 */
 	spin_lock(&state_lock);
-	if (dp->dl_time == 0) {
+	if (delegation_hashed(dp) && dp->dl_time == 0) {
 		dp->dl_time = get_seconds();
 		list_add_tail(&dp->dl_recall_lru, &nn->del_recall_lru);
 	}

From: Ard Biesheuvel <[email protected]>

commit ce9084ba0d1d8030adee7038ace32f8d9d423d0f upstream.

Turn ARCH_USE_MEMREMAP_PROT into a generic Kconfig symbol, and fix the dependency expression to reflect that AMD_MEM_ENCRYPT depends on it, instead of the other way around. This will permit ARCH_USE_MEMREMAP_PROT to be selected by other architectures.

Note that the encryption related early memremap routines in arch/x86/mm/ioremap.c cannot be built for 32-bit x86 without triggering the following warning:

arch/x86//mm/ioremap.c: In function 'early_memremap_encrypted':

                     'long long unsigned int' to 'long unsigned int' changes
                     value from '9223372036854776163' to '355' [-Woverflow]
      #define __PAGE_KERNEL_ENC (__PAGE_KERNEL | _PAGE_ENC)
                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
     arch/x86//mm/ioremap.c:713:46: note: in expansion of macro '__PAGE_KERNEL_ENC'
       return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_ENC);

which essentially means they are 64-bit only anyway. However, we cannot make them dependent on CONFIG_ARCH_HAS_MEM_ENCRYPT, since that is always defined, even for i386 (and changing that results in a slew of build errors)

So instead, build those routines only if CONFIG_AMD_MEM_ENCRYPT is defined.

---
 arch/Kconfig          |    3 +++
 arch/x86/Kconfig      |    5 +----
 arch/x86/mm/ioremap.c |    4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

@@ -870,6 +870,9 @@ config HAVE_ARCH_PREL32_RELOCATIONS
 	  architectures, and don't require runtime relocation on relocatable
 	  kernels.
 
+config ARCH_USE_MEMREMAP_PROT
+	bool
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"

@@ -1489,6 +1489,7 @@ config AMD_MEM_ENCRYPT
 	bool "AMD Secure Memory Encryption (SME) support"
 	depends on X86_64 && CPU_SUP_AMD
 	select DYNAMIC_PHYSICAL_MASK
+	select ARCH_USE_MEMREMAP_PROT
 	---help---
 	  Say yes to enable support for the encryption of system memory.
 	  This requires an AMD processor that supports Secure Memory

@@ -1507,10 +1508,6 @@ config AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
 	  If set to N, then the encryption of system memory can be
 	  activated with the mem_encrypt=on command line option.
 
-config ARCH_USE_MEMREMAP_PROT
-	def_bool y
-	depends on AMD_MEM_ENCRYPT
-
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"

@@ -697,7 +697,7 @@ bool phys_mem_access_encrypted(unsigned
 	return arch_memremap_can_ram_remap(phys_addr, size, 0);
 }
 
-#ifdef CONFIG_ARCH_USE_MEMREMAP_PROT
+#ifdef CONFIG_AMD_MEM_ENCRYPT
 /* Remap memory with encryption */
 void __init *early_memremap_encrypted(resource_size_t phys_addr,
 				      unsigned long size)

@@ -739,7 +739,7 @@ void __init *early_memremap_decrypted_wp
 
 	return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_NOENC_WP);
 }
-#endif	/* CONFIG_ARCH_USE_MEMREMAP_PROT */
+#endif	/* CONFIG_AMD_MEM_ENCRYPT */
 
 static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] __page_aligned_bss;
 

From: Tom Lendacky <[email protected]>

commit 1ff2fc02862d52e18fd3daabcfe840ec27e920a8 upstream.

Reserving memory using efi_mem_reserve() calls into the x86 efi_arch_mem_reserve() function. This function will insert a new EFI memory descriptor into the EFI memory map representing the area of memory to be reserved and marking it as EFI runtime memory. As part of adding this new entry, a new EFI memory map is allocated and mapped. The mapping is where a problem can occur. This new memory map is mapped using early_memremap() and generally mapped encrypted, unless the new memory for the mapping happens to come from an area of memory that is marked as EFI_BOOT_SERVICES_DATA memory. In this case, the new memory will be mapped unencrypted. However, during replacement of the old memory map, efi_mem_type() is disabled, so the new memory map will now be long-term mapped encrypted (in efi.memmap), resulting in the map containing invalid data and causing the kernel boot to crash.

Since it is known that the area will be mapped encrypted going forward, explicitly map the new memory map as encrypted using early_memremap_prot().

---
 arch/x86/Kconfig               |    1 +
 arch/x86/platform/efi/quirks.c |    3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

@@ -1950,6 +1950,7 @@ config EFI
 	depends on ACPI
 	select UCS2_STRING
 	select EFI_RUNTIME_WRAPPERS
+	select ARCH_USE_MEMREMAP_PROT
 	---help---
 	  This enables the kernel to use EFI runtime services that are
 	  available (such as the EFI variable services).

@@ -278,7 +278,8 @@ void __init efi_arch_mem_reserve(phys_ad
 		return;
 	}
 
-	new = early_memremap(new_phys, new_size);
+	new = early_memremap_prot(new_phys, new_size,
+				  pgprot_val(pgprot_encrypted(FIXMAP_PAGE_NORMAL)));
 	if (!new) {
 		pr_err("Failed to map new boot services memmap\n");
 		return;

From: Johannes Berg <[email protected]>

[ Upstream commit d5e568c3a4ec2ddd23e7dc5ad5b0c64e4f22981a ]

For admission control, obviously all of that only works for QoS data frames, otherwise we cannot even access the QoS field in the header.

Syzbot reported (see below) an uninitialized value here due to a status of a non-QoS nullfunc packet, which isn't even long enough to contain the QoS header.

Fix this to only do anything for QoS data packets.

---
 net/mac80211/mlme.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

index cbcb60face2c5..e5c4a72f8e571 100644
@@ -2351,11 +2351,18 @@ static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
 					   u16 tx_time)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-	u16 tid = ieee80211_get_tid(hdr);
-	int ac = ieee80211_ac_from_tid(tid);
-	struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
+	u16 tid;
+	int ac;
+	struct ieee80211_sta_tx_tspec *tx_tspec;
 	unsigned long now = jiffies;
 
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	tid = ieee80211_get_tid(hdr);
+	ac = ieee80211_ac_from_tid(tid);
+	tx_tspec = &ifmgd->tx_tspec[ac];
+
 	if (likely(!tx_tspec->admitted_time))
 		return;
 

2.33.0

From: Randy Dunlap <[email protected]>

[ Upstream commit 1dc2f2b81a6a9895da59f3915760f6c0c3074492 ]

The hyperv utilities use PTP clock interfaces and should depend a a kconfig symbol such that they will be built as a loadable module or builtin so that linker errors do not happen.

Prevents these build errors:

ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'

---
 drivers/hv/Kconfig | 1 +
 1 file changed, 1 insertion(+)

index 1c1a2514d6f31..b1c93441900ad 100644
@@ -16,6 +16,7 @@ config HYPERV_TSCPAGE
 config HYPERV_UTILS
 	tristate "Microsoft Hyper-V Utilities driver"
 	depends on HYPERV && CONNECTOR && NLS
+	depends on PTP_1588_CLOCK_OPTIONAL
 	help
 	  Select this option to enable the Hyper-V Utilities.
 

2.33.0

Hi!

This is bad idea for 4.19:

http://www.livejournal.com/~pavelmachek

Right, this doesn't work, but the bug does exist anyway, and could be fixed by listing the dependency explicitly as

           depends on PTP_1588_CLOCK || PTP_1588_CLOCK=n

The PTP_1588_CLOCK_OPTIONAL was added as a shortcut to
avoid the odd Kconfig syntax that most developers struggle with understanding at first.

Arnd

Thanks, I will go delete it from all queues.

greg k-h

From: Dinh Nguyen <[email protected]>

[ Upstream commit cb25b11943cbcc5a34531129952870420f8be858 ]

The QSPI flash node needs to have the required "jedec,spi-nor" in the compatible string.

---
 arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts   | 2 +-
 arch/arm/boot/dts/socfpga_arria5_socdk.dts         | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socdk.dts       | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sockit.dts      | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_socrates.dts    | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts       | 2 +-
 arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 4 ++--
 7 files changed, 8 insertions(+), 8 deletions(-)

index beb2fc6b9eb63..adfdc43ac052f 100644
@@ -23,7 +23,7 @@ &qspi {
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

index aac4feea86f38..09ffa79240c84 100644
@@ -131,7 +131,7 @@ &qspi {
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

index 155829f9eba16..907d8aa6d9fc8 100644
@@ -136,7 +136,7 @@ &qspi {
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 

index a4a555c19d943..fe5fe4559969d 100644
@@ -181,7 +181,7 @@ &qspi {
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

index 53bf99eef66de..0992cae3e60ef 100644
@@ -87,7 +87,7 @@ &qspi {
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;

index 8860dd2e242c4..22bfef024913a 100644
@@ -128,7 +128,7 @@ &qspi {
         flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

index f50b19447de69..3412eb17a1587 100644
@@ -249,7 +249,7 @@ &qspi {
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;

@@ -266,7 +266,7 @@ n25q128@0 {
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;

2.33.0

From: Eric Dumazet <[email protected]>

[ Upstream commit ab443c53916730862cec202078d36fd4008bea79 ]

qdiscs are not supposed to call their own destroy() method from init(), because core stack already does that.

syzbot was able to trigger use after free:

DEBUG_LOCKS_WARN_ON(lock->magic != lock)

WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline]
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Modules linked in:
CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline]
RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8
RSP: 0018:ffffc9000627f290 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44
RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000
FS:  0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
 tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810
 tcf_block_put_ext net/sched/cls_api.c:1381 [inline]
 tcf_block_put_ext net/sched/cls_api.c:1376 [inline]
 tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394
 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695
 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293
 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f1bb06badb9
Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f.
RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003
R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688
R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2
 </TASK>

---
 net/sched/sch_cake.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

index 2025f0f559deb..18c207b85d513 100644
@@ -2675,7 +2675,7 @@ static int cake_init(struct Qdisc *sch, struct nlattr *opt,
 	q->tins = kvcalloc(CAKE_MAX_TINS, sizeof(struct cake_tin_data),
 			   GFP_KERNEL);
 	if (!q->tins)
-		goto nomem;
+		return -ENOMEM;
 
 	for (i = 0; i < CAKE_MAX_TINS; i++) {
 		struct cake_tin_data *b = q->tins + i;

@@ -2705,10 +2705,6 @@ static int cake_init(struct Qdisc *sch, struct nlattr *opt,
 	q->min_netlen = ~0;
 	q->min_adjlen = ~0;
 	return 0;
-
-nomem:
-	cake_destroy(sch);
-	return -ENOMEM;
 }
 
 static int cake_dump(struct Qdisc *sch, struct sk_buff *skb)

2.33.0

From: Alyssa Ross <[email protected]>

[ Upstream commit 822c9f2b833c53fc67e8adf6f63ecc3ea24d502c ]

modprobe can't handle spaces in aliases.

---
 drivers/dma/st_fdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index bfb79bd0c6de5..087d22ba8a2f6 100644
@@ -886,4 +886,4 @@ MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("STMicroelectronics FDMA engine driver");
 MODULE_AUTHOR("Ludovic.barre <[email protected]>");
 MODULE_AUTHOR("Peter Griffin <[email protected]>");
-MODULE_ALIAS("platform: " DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);

2.33.0

From: Hangyu Hua <[email protected]>

[ Upstream commit 5f9562ebe710c307adc5f666bf1a2162ee7977c0 ]

__rds_conn_create() did not release conn->c_path when loop_trans != 0 and trans->t_prefer_loopback != 0 and is_outgoing == 0.

---
 net/rds/connection.c | 1 +
 1 file changed, 1 insertion(+)

index ac3300b204a6f..af9f7d1840037 100644
@@ -250,6 +250,7 @@ static struct rds_connection *__rds_conn_create(struct net *net,
 				 * should end up here, but if it
 				 * does, reset/destroy the connection.
 				 */
+				kfree(conn->c_path);
 				kmem_cache_free(rds_conn_slab, conn);
 				conn = ERR_PTR(-EOPNOTSUPP);
 				goto out;

2.33.0

From: Nathan Chancellor <[email protected]>

[ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ]

A new warning in clang points out two instances where boolean expressions are being used with a bitwise OR instead of logical OR:

drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]

                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||

drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning 2 warnings generated.

The motivation for the warning is that logical operations short circuit while bitwise operations do not.

In this instance, tegra_fuse_read_spare() is not semantically returning a boolean, it is returning a bit value. Use u32 for its return type so that it can be used with either bitwise or boolean operators without any warnings.

---
 drivers/soc/tegra/fuse/fuse-tegra.c | 2 +-
 drivers/soc/tegra/fuse/fuse.h       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 51625703399e4..52130ec8c9049 100644
@@ -182,7 +182,7 @@ static struct platform_driver tegra_fuse_driver = {
 };
 builtin_platform_driver(tegra_fuse_driver);
 
-bool __init tegra_fuse_read_spare(unsigned int spare)
+u32 __init tegra_fuse_read_spare(unsigned int spare)
 {
 	unsigned int offset = fuse->soc->info->spare + spare * 4;
 

index f355b9d549151..bf489d50e6687 100644
@@ -62,7 +62,7 @@ struct tegra_fuse {
 void tegra_init_revision(void);
 void tegra_init_apbmisc(void);
 
-bool __init tegra_fuse_read_spare(unsigned int spare);
+u32 __init tegra_fuse_read_spare(unsigned int spare);
 u32 __init tegra_fuse_read_early(unsigned int offset);
 
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC

2.33.0

From: Karen Sornek <[email protected]>

[ Upstream commit 584af82154f56e6b2740160fcc84a2966d969e15 ]

Move checking condition of VF MAC filter before clearing or adding MAC filter to VF to prevent potential blackout caused by removal of necessary and working VF's MAC filter.

---
 drivers/net/ethernet/intel/igb/igb_main.c | 28 +++++++++++------------
 1 file changed, 14 insertions(+), 14 deletions(-)

index 6221dafc76b95..74b50f17832d1 100644
@@ -7406,6 +7406,20 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
 	struct vf_mac_filter *entry = NULL;
 	int ret = 0;
 
+	if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
+	    !vf_data->trusted) {
+		dev_warn(&pdev->dev,
+			 "VF %d requested MAC filter but is administratively denied\n",
+			  vf);
+		return -EINVAL;
+	}
+	if (!is_valid_ether_addr(addr)) {
+		dev_warn(&pdev->dev,
+			 "VF %d attempted to set invalid MAC filter\n",
+			  vf);
+		return -EINVAL;
+	}
+
 	switch (info) {
 	case E1000_VF_MAC_FILTER_CLR:
 		/* remove all unicast MAC filters related to the current VF */

@@ -7419,20 +7433,6 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
 		}
 		break;
 	case E1000_VF_MAC_FILTER_ADD:
-		if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
-		    !vf_data->trusted) {
-			dev_warn(&pdev->dev,
-				 "VF %d requested MAC filter but is administratively denied\n",
-				 vf);
-			return -EINVAL;
-		}
-		if (!is_valid_ether_addr(addr)) {
-			dev_warn(&pdev->dev,
-				 "VF %d attempted to set invalid MAC filter\n",
-				 vf);
-			return -EINVAL;
-		}
-
 		/* try to find empty slot in the list */
 		list_for_each(pos, &adapter->vf_macs.l) {
 			entry = list_entry(pos, struct vf_mac_filter, l);

2.33.0

From: Letu Ren <[email protected]>

[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ]

In igbvf_probe, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is list_for_each_entry_safe and netif_napi_del which aims to delete all entries in dev->napi_list. The program has added an entry adapter->rx_ring->napi which is added by netif_napi_add in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF.

In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before adapter->rx_ring.

The KASAN logs are as follows:

[   35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450
[   35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366
[   35.128360]
[   35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14
[   35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   35.131749] Call Trace:
[   35.132199]  dump_stack_lvl+0x59/0x7b
[   35.132865]  print_address_description+0x7c/0x3b0
[   35.133707]  ? free_netdev+0x1fd/0x450
[   35.134378]  __kasan_report+0x160/0x1c0
[   35.135063]  ? free_netdev+0x1fd/0x450
[   35.135738]  kasan_report+0x4b/0x70
[   35.136367]  free_netdev+0x1fd/0x450
[   35.137006]  igbvf_probe+0x121d/0x1a10 [igbvf]
[   35.137808]  ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf]
[   35.138751]  local_pci_probe+0x13c/0x1f0
[   35.139461]  pci_device_probe+0x37e/0x6c0
[   35.165526]
[   35.165806] Allocated by task 366:
[   35.166414]  ____kasan_kmalloc+0xc4/0xf0
[   35.167117]  foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf]
[   35.168078]  igbvf_probe+0x9c5/0x1a10 [igbvf]
[   35.168866]  local_pci_probe+0x13c/0x1f0
[   35.169565]  pci_device_probe+0x37e/0x6c0
[   35.179713]
[   35.179993] Freed by task 366:
[   35.180539]  kasan_set_track+0x4c/0x80
[   35.181211]  kasan_set_free_info+0x1f/0x40
[   35.181942]  ____kasan_slab_free+0x103/0x140
[   35.182703]  kfree+0xe3/0x250
[   35.183239]  igbvf_probe+0x1173/0x1a10 [igbvf]
[   35.184040]  local_pci_probe+0x13c/0x1f0

---
 drivers/net/ethernet/intel/igbvf/netdev.c | 1 +
 1 file changed, 1 insertion(+)

index e0c989ffb2b3e..df827c2541628 100644
@@ -2888,6 +2888,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 
 err_hw_init:
+	netif_napi_del(&adapter->rx_ring->napi);
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:

2.33.0

From: Cyril Novikov <[email protected]>

[ Upstream commit bf0a375055bd1afbbf02a0ef45f7655da7b71317 ]

The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support.

This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure.

Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup:

* Use an Atom C3000 family system with at least one X552 LAN on the SoC
* Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots)
* Connect a live 10Gb Ethernet cable to an X550 port
* Power cycle (not reset, doesn't always work) the system and boot Linux
* Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 3 +++
 1 file changed, 3 insertions(+)

index 9772016222c30..9277d57c4a70b 100644
@@ -3391,6 +3391,9 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
 	/* flush pending Tx transactions */
 	ixgbe_clear_tx_pending(hw);
 
+	/* set MDIO speed before talking to the PHY in case it's the 1st time */
+	ixgbe_set_mdio_speed(hw);
+
 	/* PHY ops must be identified and initialized prior to reset */
 	status = hw->phy.ops.init(hw);
 	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED ||

2.33.0

From: Haimin Zhang <[email protected]>

[ Upstream commit 481221775d53d6215a6e5e9ce1cce6d2b4ab9a46 ]

Zero-initialize memory for new map's value in function nsim_bpf_map_alloc since it may cause a potential kernel information leak issue, as follows:
1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for a new map.
2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't zero it.
3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific element's information in the map.
4. The kernel function map_lookup_elem will call bpf_map_copy_value to get the information allocated at step-2, then use copy_to_user to copy to the user buffer.
This can only leak information for an array map.

---
 drivers/net/netdevsim/bpf.c | 1 +
 1 file changed, 1 insertion(+)

index 81444208b2162..12f100392ed11 100644
@@ -493,6 +493,7 @@ nsim_bpf_map_alloc(struct netdevsim *ns, struct bpf_offloaded_map *offmap)
 				goto err_free;
 			key = nmap->entry[i].key;
 			*key = i;
+			memset(nmap->entry[i].value, 0, offmap->map.value_size);
 		}
 	}
 

2.33.0

From: Willem de Bruijn <[email protected]>

[ Upstream commit ec6af094ea28f0f2dda1a6a33b14cd57e36a9755 ]

Packet sockets may switch ring versions. Avoid misinterpreting state between versions, whose fields share a union. rx_owner_map is only allocated with a packet ring (pg_vec) and both are swapped together. If pg_vec is NULL, meaning no packet ring was allocated, then neither was rx_owner_map. And the field may be old state from a tpacket_v3.

---
 net/packet/af_packet.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index 8d9005019ef78..1309161032d50 100644
@@ -4439,9 +4439,10 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u,
 	}
 
 out_free_pg_vec:
-	bitmap_free(rx_owner_map);
-	if (pg_vec)
+	if (pg_vec) {
+		bitmap_free(rx_owner_map);
 		free_pg_vec(pg_vec, order, req->tp_block_nr);
+	}
 out:
 	return err;
 }

2.33.0

From: Eric Dumazet <[email protected]>

[ Upstream commit e28587cc491ef0f3c51258fdc87fbc386b1d4c59 ]

ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong.

Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy.

syzbot reported:

dst_release underflow

WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173
Modules linked in:
CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173
Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48
RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246
RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000
RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c
R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358
R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000
FS:  00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160
 ipip6_dev_free net/ipv6/sit.c:1414 [inline]
 sit_init_net+0x229/0x550 net/ipv6/sit.c:1936
 ops_init+0x313/0x430 net/core/net_namespace.c:140
 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326
 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470
 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226
 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075
 __do_sys_unshare kernel/fork.c:3146 [inline]
 __se_sys_unshare kernel/fork.c:3144 [inline]
 __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f66c882ce99
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200
RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000
 </TASK>

---
 net/ipv6/sit.c | 1 -
 1 file changed, 1 deletion(-)

index 4a49200d0d11c..55c999cbe6e96 100644
@@ -1875,7 +1875,6 @@ static int __net_init sit_init_net(struct net *net)
 	return 0;
 
 err_reg_dev:
-	ipip6_dev_free(sitn->fb_tunnel_dev);
 	free_netdev(sitn->fb_tunnel_dev);
 err_alloc_dev:
 	return err;

2.33.0

From: Greg Kroah-Hartman <[email protected]>

[ Upstream commit f08adf5add9a071160c68bb2a61d697f39ab0758 ]

Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly.

Fix that up by only checking the single bit.

---
 drivers/usb/gadget/composite.c    | 6 +++---
 drivers/usb/gadget/legacy/dbgp.c  | 6 +++---
 drivers/usb/gadget/legacy/inode.c | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

index 99550c9eb33ed..748f8fede5c23 100644
@@ -1635,14 +1635,14 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u8				endp;
 
 	if (w_length > USB_COMP_EP0_BUFSIZ) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			goto done;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
 			w_length = USB_COMP_EP0_BUFSIZ;
+		} else {
+			goto done;
 		}
 	}
 

index 355bc7dab9d5f..6bcbad3825802 100644
@@ -346,14 +346,14 @@ static int dbgp_setup(struct usb_gadget *gadget,
 	u16 len = 0;
 
 	if (length > DBGP_REQ_LEN) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			return err;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(DBGP_REQ_LEN);
 			length = DBGP_REQ_LEN;
+		} else {
+			return err;
 		}
 	}
 

index 848562222015d..a456267b6b784 100644
@@ -1335,14 +1335,14 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 
 	if (w_length > RBUF_SIZE) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			return value;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(RBUF_SIZE);
 			w_length = RBUF_SIZE;
+		} else {
+			return value;
 		}
 	}
 

2.34.1

From: Jimmy Wang <[email protected]>

commit 0ad3bd562bb91853b9f42bda145b5db6255aee90 upstream.

This device doesn't work well with LPM, losing connectivity intermittently. Disable LPM to resolve the issue.

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -435,6 +435,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Lenovo USB-C to Ethernet Adapter RTL8153-04 */
+	{ USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
 	{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
 

From: Thomas Gleixner <[email protected]>

commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream.

PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X interrupt setup time. It's cleared on success, but the error handling path only clears the PCI_MSIX_FLAGS_ENABLE bit.

That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is zero. That can be observed via lspci:

Capabilities: [b0] MSI-X: Enable- Count=67 Masked+

Clear the bit in the error path to restore the reset state.

---
 drivers/pci/msi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -850,7 +850,7 @@ out_free:
 	free_msi_irqs(dev);
 
 out_disable:
-	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE, 0);
 
 	return ret;
 }

From: Stefan Roese <[email protected]>

commit 83dbf898a2d45289be875deb580e93050ba67529 upstream.

Masking all unused MSI-X entries is done to ensure that a crash kernel starts from a clean slate, which correponds to the reset state of the device as defined in the PCI-E specificion 3.0 and later:

Vector Control for MSI-X Table Entries
--------------------------------------

"00: Mask bit: When this bit is set, the function is prohibited from
sending a message using this MSI-X Table entry.
...
This bit’s state after reset is 1 (entry is masked)."

A Marvell NVME device fails to deliver MSI interrupts after trying to enable MSI-X interrupts due to that masking. It seems to take the MSI-X mask bits into account even when MSI-X is disabled.

While not specification compliant, this can be cured by moving the masking into the success path, so that the MSI-X table entries stay in device reset state when the MSI-X setup fails.

[ tglx: Move it into the success path, add comment and amend changelog ]

---
 drivers/pci/msi.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

@@ -799,9 +799,6 @@ static int msix_capability_init(struct p
 		goto out_disable;
 	}
 
-	/* Ensure that all table entries are masked. */
-	msix_mask_all(base, tsize);
-
 	ret = msix_setup_entries(dev, base, entries, nvec, affd);
 	if (ret)
 		goto out_disable;

@@ -824,6 +821,16 @@ static int msix_capability_init(struct p
 	/* Set MSI-X enabled bits and unmask the function */
 	pci_intx_for_msi(dev, 0);
 	dev->msix_enabled = 1;
+
+	/*
+	 * Ensure that all table entries are masked to prevent
+	 * stale entries from firing in a crash kernel.
+	 *
+	 * Done late to deal with a broken Marvell NVME device
+	 * which takes the MSI-X mask bits into account even
+	 * when MSI-X is disabled, which prevents MSI delivery.
+	 */
+	msix_mask_all(base, tsize);
 	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
 
 	pcibios_free_irq(dev);

From: Johan Hovold <[email protected]>

commit 83b67041f3eaf33f98a075249aa7f4c7617c2f85 upstream.

When generalising GPIO support and adding support for CP2102N, the GPIO registration for some CP2105 devices accidentally broke. Specifically, when all the pins of a port are in "modem" mode, and thus unavailable for GPIO use, the GPIO chip would now be registered without having initialised the number of GPIO lines. This would in turn be rejected by gpiolib and some errors messages would be printed (but importantly probe would still succeed).

Fix this by initialising the number of GPIO lines before registering the GPIO chip.

Note that as for the other device types, and as when all CP2105 pins are muxed for LED function, the GPIO chip is registered also when no pins are available for GPIO use.

---
 drivers/usb/serial/cp210x.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -1535,6 +1535,8 @@ static int cp2105_gpioconf_init(struct u
 
 	/*  2 banks of GPIO - One for the pins taken from each serial port */
 	if (intf_num == 0) {
+		priv->gc.ngpio = 2;
+
 		if (mode.eci == CP210X_PIN_MODE_MODEM) {
 			/* mark all GPIOs of this interface as reserved */
 			priv->gpio_altfunc = 0xff;

@@ -1545,8 +1547,9 @@ static int cp2105_gpioconf_init(struct u
 		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
 						CP210X_ECI_GPIO_MODE_MASK) >>
 						CP210X_ECI_GPIO_MODE_OFFSET);
-		priv->gc.ngpio = 2;
 	} else if (intf_num == 1) {
+		priv->gc.ngpio = 3;
+
 		if (mode.sci == CP210X_PIN_MODE_MODEM) {
 			/* mark all GPIOs of this interface as reserved */
 			priv->gpio_altfunc = 0xff;

@@ -1557,7 +1560,6 @@ static int cp2105_gpioconf_init(struct u
 		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
 						CP210X_SCI_GPIO_MODE_MASK) >>
 						CP210X_SCI_GPIO_MODE_OFFSET);
-		priv->gc.ngpio = 3;
 	} else {
 		return -ENODEV;
 	}

From: Daniele Palmas <[email protected]>

commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream.

Add the following Telit FN990 compositions:

0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty

---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -1219,6 +1219,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff),	/* Telit FN990 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff),	/* Telit FN990 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff),	/* Telit FN990 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff),	/* Telit FN990 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

From: Yu Liao <[email protected]>

commit 4e8c11b6b3f0b6a283e898344f154641eda94266 upstream.

Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive") it is still possible to make wall_to_monotonic positive by running the following code:

    int main(void)
    {
        struct timespec time;

        clock_gettime(CLOCK_MONOTONIC, &time);
        time.tv_nsec = 0;
        clock_settime(CLOCK_REALTIME, &time);
        return 0;
    }

The reason is that the second parameter of timespec64_compare(), ts_delta, may be unnormalized because the delta is calculated with an open coded substraction which causes the comparison of tv_sec to yield the wrong result:

wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 }

That makes timespec64_compare() claim that wall_to_monotonic < ts_delta, but actually the result should be wall_to_monotonic > ts_delta.

After normalization, the result of timespec64_compare() is correct because the tv_sec comparison is not longer misleading:

wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 }

Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the issue.

---
 kernel/time/timekeeping.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -1235,8 +1235,7 @@ int do_settimeofday64(const struct times
 	timekeeping_forward_now(tk);
 
 	xt = tk_xtime(tk);
-	ts_delta.tv_sec = ts->tv_sec - xt.tv_sec;
-	ts_delta.tv_nsec = ts->tv_nsec - xt.tv_nsec;
+	ts_delta = timespec64_sub(*ts, xt);
 
 	if (timespec64_compare(&tk->wall_to_monotonic, &ts_delta) > 0) {
 		ret = -EINVAL;

From: George Kennedy <[email protected]>

commit 5da5231bb47864e5dd6c6731151e98b6ee498827 upstream.

Avoid data corruption by rejecting pass-through commands where T_LENGTH is zero (No data is transferred) and the dma direction is not DMA_NONE.

---
 drivers/ata/libata-scsi.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

@@ -3181,8 +3181,19 @@ static unsigned int ata_scsi_pass_thru(s
 		goto invalid_fld;
 	}
 
-	if (ata_is_ncq(tf->protocol) && (cdb[2 + cdb_offset] & 0x3) == 0)
-		tf->protocol = ATA_PROT_NCQ_NODATA;
+	if ((cdb[2 + cdb_offset] & 0x3) == 0) {
+		/*
+		 * When T_LENGTH is zero (No data is transferred), dir should
+		 * be DMA_NONE.
+		 */
+		if (scmd->sc_data_direction != DMA_NONE) {
+			fp = 2 + cdb_offset;
+			goto invalid_fld;
+		}
+
+		if (ata_is_ncq(tf->protocol))
+			tf->protocol = ATA_PROT_NCQ_NODATA;
+	}
 
 	/* enable LBA */
 	tf->flags |= ATA_TFLAG_LBA;

From: Le Ma <[email protected]>

commit f3a8076eb28cae1553958c629aecec479394bbe2 upstream.

should count on GC IP base address

---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -2198,8 +2198,8 @@ static void gfx_v9_0_init_pg(struct amdg
 			      AMD_PG_SUPPORT_CP |
 			      AMD_PG_SUPPORT_GDS |
 			      AMD_PG_SUPPORT_RLC_SMU_HS)) {
-		WREG32(mmRLC_JUMP_TABLE_RESTORE,
-		       adev->gfx.rlc.cp_table_gpu_addr >> 8);
+		WREG32_SOC15(GC, 0, mmRLC_JUMP_TABLE_RESTORE,
+			     adev->gfx.rlc.cp_table_gpu_addr >> 8);
 		gfx_v9_0_init_gfx_power_gating(adev);
 	}
 }

From: Florian Fainelli <[email protected]>

commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 upstream.

The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues.

This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length.

The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer.

The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used.

---
 drivers/net/ethernet/broadcom/bcmsysport.c |    5 +++++
 drivers/net/ethernet/broadcom/bcmsysport.h |    1 +
 2 files changed, 6 insertions(+)

@@ -120,9 +120,13 @@ static inline void tdma_port_write_desc_
 					     struct dma_desc *desc,
 					     unsigned int port)
 {
+	unsigned long desc_flags;
+
 	/* Ports are latched, so write upper address first */
+	spin_lock_irqsave(&priv->desc_lock, desc_flags);
 	tdma_writel(priv, desc->addr_status_len, TDMA_WRITE_PORT_HI(port));
 	tdma_writel(priv, desc->addr_lo, TDMA_WRITE_PORT_LO(port));
+	spin_unlock_irqrestore(&priv->desc_lock, desc_flags);
 }
 
 /* Ethtool operations */

@@ -2003,6 +2007,7 @@ static int bcm_sysport_open(struct net_d
 	}
 
 	/* Initialize both hardware and software ring */
+	spin_lock_init(&priv->desc_lock);
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		ret = bcm_sysport_init_tx_ring(priv, i);
 		if (ret) {

@@ -751,6 +751,7 @@ struct bcm_sysport_priv {
 	int			wol_irq;
 
 	/* Transmit rings */
+	spinlock_t		desc_lock;
 	struct bcm_sysport_tx_ring *tx_rings;
 
 	/* Receive queue */

From: Johannes Berg <[email protected]>

commit 768c0b19b50665e337c96858aa2b7928d6dcf756 upstream.

Before attempting to parse an extended element, verify that the extended element ID is present.

---
 net/mac80211/util.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1102,6 +1102,8 @@ u32 ieee802_11_parse_elems_crc(const u8
 				elems->max_idle_period_ie = (void *)pos;
 			break;
 		case WLAN_EID_EXTENSION:
+			if (!elen)
+				break;
 			if (pos[0] == WLAN_EID_EXT_HE_MU_EDCA &&
 			    elen >= (sizeof(*elems->mu_edca_param_set) + 1)) {
 				elems->mu_edca_param_set = (void *)&pos[1];

From: Nathan Chancellor <[email protected]>

commit 94e7c844990f0db92418586b107be135b4963b66 upstream.

Clang warns when a variable is assigned to itself.

drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign]

                        offset = offset;
                        ~~~~~~ ^ ~~~~~~

1 warning generated.

Reorder the if statement to acheive the same result and avoid a self assignment warning.

---
 drivers/net/usb/lan78xx.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

@@ -945,11 +945,9 @@ static int lan78xx_read_otp(struct lan78
 	ret = lan78xx_read_raw_otp(dev, 0, 1, &sig);
 
 	if (ret == 0) {
-		if (sig == OTP_INDICATOR_1)
-			offset = offset;
-		else if (sig == OTP_INDICATOR_2)
+		if (sig == OTP_INDICATOR_2)
 			offset += 0x100;
-		else
+		else if (sig != OTP_INDICATOR_1)
 			ret = -EINVAL;
 		if (!ret)
 			ret = lan78xx_read_raw_otp(dev, offset, length, data);

From: Nicolas Pitre <[email protected]>

commit b99afae1390140f5b0039e6b37a7380de31ae874 upstream.

The naked attribute is known to confuse some old gcc versions when function arguments aren't explicitly listed as inline assembly operands despite the gcc documentation. That resulted in commit 9a40ac86152c ("ARM: 6164/1: Add kto and kfrom to input operands list.").

Yet that commit has problems of its own by having assembly operand constraints completely wrong. If the generated code has been OK since then, it is due to luck rather than correctness. So this patch also provides proper assembly operand constraints, and removes two instances of redundant register usages in the implementation while at it.

Inspection of the generated code with this patch doesn't show any obvious quality degradation either, so not relying on __naked at all will make the code less fragile, and avoid some issues with clang.

The only remaining __naked instances (excluding the kprobes test cases) are exynos_pm_power_up_setup(), tc2_pm_power_up_setup() and

cci_enable_port_for_self(. But in the first two cases, only the function address is used by the compiler with no chance of inlining it by mistake, and the third case is called from assembly code only. And the fact that no stack is available when the corresponding code is executed does warrant the __naked usage in those cases.

---
 arch/arm/mm/copypage-fa.c       |   35 ++++++--------
 arch/arm/mm/copypage-feroceon.c |   98 +++++++++++++++++++---------------------
 arch/arm/mm/copypage-v4mc.c     |   19 +++----
 arch/arm/mm/copypage-v4wb.c     |   41 ++++++++--------
 arch/arm/mm/copypage-v4wt.c     |   37 +++++++--------
 arch/arm/mm/copypage-xsc3.c     |   71 ++++++++++++----------------
 arch/arm/mm/copypage-xscale.c   |   71 ++++++++++++++--------------
 7 files changed, 178 insertions(+), 194 deletions(-)

@@ -17,26 +17,25 @@
 /*
  * Faraday optimised copy_user_page
  */
-static void __naked
-fa_copy_user_page(void *kto, const void *kfrom)
+static void fa_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
-1:	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	subs	r2, r2, #1			@ 1\n\
+	int tmp;
+
+	asm volatile ("\
+1:	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	subs	%2, %2, #1			@ 1\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "I" (PAGE_SIZE / 32));
+	mcr	p15, 0, %2, c7, c10, 4		@ 1   drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 32)
+	: "r3", "r4", "ip", "lr");
 }
 
 void fa_copy_user_highpage(struct page *to, struct page *from,

@@ -40,12 +40,11 @@ static DEFINE_RAW_SPINLOCK(minicache_loc
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __naked
-mc_copy_user_page(void *from, void *to)
+static void mc_copy_user_page(void *from, void *to)
 {
-	asm volatile(
-	"stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r4, %2				@ 1\n\
+	int tmp;
+
+	asm volatile ("\
 	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\

@@ -55,13 +54,13 @@ mc_copy_user_page(void *from, void *to)
 	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
 	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r4, r4, #1			@ 1\n\
+	subs	%2, %2, #1			@ 1\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
 	ldmneia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	bne	1b				@ 1\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+	bne	1b				@ "
+	: "+&r" (from), "+&r" (to), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r2", "r3", "ip", "lr");
 }
 
 void v4_mc_copy_user_highpage(struct page *to, struct page *from,

@@ -20,27 +20,26 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __naked
-v4wt_copy_user_page(void *kto, const void *kfrom)
+static void v4wt_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	int tmp;
+
+	asm volatile ("\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+1:	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	%2, %2, #1			@ 1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	%1!, {r3, r4, ip, lr}		@ 4\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
+	mcr	p15, 0, %2, c7, c7, 0		@ flush ID cache"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r3", "r4", "ip", "lr");
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,

From: Nathan Chancellor <[email protected]>

commit 6a953dc4dbd1c7057fb765a24f37a5e953c85fb0 upstream.

A new warning in clang points out when macro expansion might result in a GNU C statement expression. There is an instance of this in the mwifiex driver:

drivers/net/wireless/marvell/mwifiex/cmdevt.c:217:34: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]

        host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex/fw.h:519:46: note: expanded from
macro 'HostCmd_SET_SEQ_NO_BSS_INFO'
        (((type) & 0x000f) << 12);                  }
                                                    ^

This does not appear to be a real issue. Removing the braces and replacing them with parentheses will fix the warning and not change the meaning of the code.

---
 drivers/net/wireless/marvell/mwifiex/cmdevt.c |    4 ++--
 drivers/net/wireless/marvell/mwifiex/fw.h     |    8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

@@ -324,9 +324,9 @@ static int mwifiex_dnld_sleep_confirm_cm
 
 	adapter->seq_num++;
 	sleep_cfm_buf->seq_num =
-		cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO
+		cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
 					(adapter->seq_num, priv->bss_num,
-					 priv->bss_type)));
+					 priv->bss_type));
 
 	mwifiex_dbg(adapter, CMD,
 		    "cmd: DNLD_CMD: %#x, act %#x, len %d, seqno %#x\n",

@@ -512,10 +512,10 @@ enum mwifiex_channel_flags {
 
 #define RF_ANTENNA_AUTO                 0xFFFF
 
-#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) {   \
-	(((seq) & 0x00ff) |                             \
-	 (((num) & 0x000f) << 8)) |                     \
-	(((type) & 0x000f) << 12);                  }
+#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) \
+	((((seq) & 0x00ff) |                        \
+	 (((num) & 0x000f) << 8)) |                 \
+	(((type) & 0x000f) << 12))
 
 #define HostCmd_GET_SEQ_NO(seq)       \
 	((seq) & HostCmd_SEQ_NUM_MASK)

From: Stefan Agner <[email protected]>

commit f9b58e8c7d031b0daa5c9a9ee27f5a4028ba53ac upstream.

While in theory multiple unwinders could be compiled in, it does not make sense in practise. Use a choice to make the unwinder selection mutually exclusive and mandatory.

Already before this commit it has not been possible to deselect FRAME_POINTER. Remove the obsolete comment.

Furthermore, to produce a meaningful backtrace with FRAME_POINTER enabled the kernel needs a specific function prologue:
mov ip, sp
stmfd sp!, {fp, ip, lr, pc}
sub fp, ip, #4

To get to the required prologue gcc uses apcs and no-sched-prolog. This compiler options are not available on clang, and clang is not able to generate the required prologue. Make the FRAME_POINTER config symbol depending on !clang.

---
 arch/arm/Kconfig.debug |   44 ++++++++++++++++++++++++++++----------------
 lib/Kconfig.debug      |    6 +++---
 2 files changed, 31 insertions(+), 19 deletions(-)

@@ -45,30 +45,42 @@ config DEBUG_WX
 
 		If in doubt, say "Y".
 
-# RMK wants arm kernels compiled with frame pointers or stack unwinding.
-# If you know what you are doing and are willing to live without stack
-# traces, you can get a slightly smaller kernel by setting this option to
-# n, but then RMK will have to kill you ;).
-config FRAME_POINTER
-	bool
-	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
+choice
+	prompt "Choose kernel unwinder"
+	default UNWINDER_ARM if AEABI && !FUNCTION_GRAPH_TRACER
+	default UNWINDER_FRAME_POINTER if !AEABI || FUNCTION_GRAPH_TRACER
 	help
-	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
-	  when a problem occurs with the kernel, the information that is
-	  reported is severely limited.
+	  This determines which method will be used for unwinding kernel stack
+	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
+	  livepatch, lockdep, and more.
 
-config ARM_UNWIND
-	bool "Enable stack unwinding support (EXPERIMENTAL)"
+config UNWINDER_FRAME_POINTER
+	bool "Frame pointer unwinder"
+	depends on !THUMB2_KERNEL && !CC_IS_CLANG
+	select ARCH_WANT_FRAME_POINTERS
+	select FRAME_POINTER
+	help
+	  This option enables the frame pointer unwinder for unwinding
+	  kernel stack traces.
+
+config UNWINDER_ARM
+	bool "ARM EABI stack unwinder"
 	depends on AEABI
-	default y
+	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
 	  using the information automatically generated by the
 	  compiler. The resulting kernel image is slightly bigger but
 	  the performance is not affected. Currently, this feature
-	  only works with EABI compilers. If unsure say Y.
+	  only works with EABI compilers.
+
+endchoice
+
+config ARM_UNWIND
+	bool
+
+config FRAME_POINTER
+	bool
 
 config OLD_MCOUNT
 	bool

@@ -1178,7 +1178,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86
+	select FRAME_POINTER if !MIPS && !PPC && !ARM && !S390 && !MICROBLAZE && !ARC && !X86
 	select KALLSYMS
 	select KALLSYMS_ALL
 

@@ -1589,7 +1589,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86
+	select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 

@@ -1598,7 +1598,7 @@ config LATENCYTOP
 	depends on DEBUG_KERNEL
 	depends on STACKTRACE_SUPPORT
 	depends on PROC_FS
-	select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86
+	select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE

From: Nathan Chancellor <[email protected]>

commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream.

A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen.

---
 drivers/input/touchscreen/of_touchscreen.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

@@ -80,8 +80,8 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-x",
 						input_abs_get_max(input,
 								  axis) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
 						input_abs_get_fuzz(input, axis),
 						&fuzz);
 	if (data_present)

@@ -91,8 +91,8 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-y",
 						input_abs_get_max(input,
 								  axis) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
 						input_abs_get_fuzz(input, axis),
 						&fuzz);
 	if (data_present)

@@ -102,11 +102,11 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev,
 						"touchscreen-max-pressure",
 						input_abs_get_max(input, axis),
-						&maximum) |
-		       touchscreen_get_prop_u32(dev,
-						"touchscreen-fuzz-pressure",
-						input_abs_get_fuzz(input, axis),
-						&fuzz);
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev,
+						 "touchscreen-fuzz-pressure",
+						 input_abs_get_fuzz(input, axis),
+						 &fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
 

From: Sudeep Holla <[email protected]>

commit 865ed67ab955428b9aa771d8b4f1e4fb7fd08945 upstream.

Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30.

Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically.

---
 drivers/firmware/scpi_pm_domain.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -27,7 +27,6 @@ struct scpi_pm_domain {
 	struct generic_pm_domain genpd;
 	struct scpi_ops *ops;
 	u32 domain;
-	char name[30];
 };
 
 /*

@@ -121,8 +120,13 @@ static int scpi_pm_domain_probe(struct p
 
 		scpi_pd->domain = i;
 		scpi_pd->ops = scpi_ops;
-		sprintf(scpi_pd->name, "%s.%d", np->name, i);
-		scpi_pd->genpd.name = scpi_pd->name;
+		scpi_pd->genpd.name = devm_kasprintf(dev, GFP_KERNEL,
+						     "%s.%d", np->name, i);
+		if (!scpi_pd->genpd.name) {
+			dev_err(dev, "Failed to allocate genpd name:%s.%d\n",
+				np->name, i);
+			continue;
+		}
 		scpi_pd->genpd.power_off = scpi_pd_power_off;
 		scpi_pd->genpd.power_on = scpi_pd_power_on;
 

From: Fabio Estevam <[email protected]>

commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream.

According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may have the ESAI_TX0 functionality, not ESAI_T0.

Also, NXP's i.MX Config Tools 10.0 generates dtsi with the MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.

There are no devicetree users in mainline that use the old name, so just remove the old entry.

---
 arch/arm/boot/dts/imx6ull-pinfunc.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -68,6 +68,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */

From: Pavel Skripkin <[email protected]>

commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream.

Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location.

Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls:

	dvb_usbv2_init()
	  dvb_usbv2_adapter_init()
	    dvb_usbv2_adapter_frontend_init()
	      props->frontend_attach()

	  props->init()

Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex.

---
 drivers/media/usb/dvb-usb-v2/mxl111sf.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

@@ -932,8 +932,6 @@ static int mxl111sf_init(struct dvb_usb_
 		  .len = sizeof(eeprom), .buf = eeprom },
 	};
 
-	mutex_init(&state->msg_lock);
-
 	ret = get_chip_info(state);
 	if (mxl_fail(ret))
 		pr_err("failed to get chip info during probe");

@@ -1075,6 +1073,14 @@ static int mxl111sf_get_stream_config_dv
 	return 0;
 }
 
+static int mxl111sf_probe(struct dvb_usb_device *dev)
+{
+	struct mxl111sf_state *state = d_to_priv(dev);
+
+	mutex_init(&state->msg_lock);
+	return 0;
+}
+
 static struct dvb_usb_device_properties mxl111sf_props_dvbt = {
 	.driver_name = KBUILD_MODNAME,
 	.owner = THIS_MODULE,

@@ -1084,6 +1090,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_dvbt,
 	.tuner_attach      = mxl111sf_attach_tuner,

@@ -1125,6 +1132,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_atsc,
 	.tuner_attach      = mxl111sf_attach_tuner,

@@ -1166,6 +1174,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_mh,
 	.tuner_attach      = mxl111sf_attach_tuner,

@@ -1234,6 +1243,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_atsc_mh,
 	.tuner_attach      = mxl111sf_attach_tuner,

@@ -1312,6 +1322,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_mercury,
 	.tuner_attach      = mxl111sf_attach_tuner,

@@ -1382,6 +1393,7 @@ static struct dvb_usb_device_properties
 	.generic_bulk_ctrl_endpoint = 0x02,
 	.generic_bulk_ctrl_endpoint_response = 0x81,
 
+	.probe             = mxl111sf_probe,
 	.i2c_algo          = &mxl111sf_i2c_algo,
 	.frontend_attach   = mxl111sf_frontend_attach_mercury_mh,
 	.tuner_attach      = mxl111sf_attach_tuner,

From: Miklos Szeredi <[email protected]>

commit bda9a71980e083699a0360963c0135657b73f47a upstream.

Add missing inode lock annotatation; found by syzbot.

---
 fs/fuse/dir.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -984,7 +984,7 @@ int fuse_reverse_inval_entry(struct supe
 	if (!parent)
 		return -ENOENT;
 
-	inode_lock(parent);
+	inode_lock_nested(parent, I_MUTEX_PARENT);
 	if (!S_ISDIR(parent->i_mode))
 		goto unlock;
 

From: Miklos Szeredi <[email protected]>

commit 1f5573cfe7a7056e80a92c7a037a3e69f3a13d1c upstream.

Syzbot triggered the following warning in ovl_workdir_create() -> ovl_create_real():

	if (!err && WARN_ON(!newdentry->d_inode)) {

The reason is that the cgroup2 filesystem returns from mkdir without instantiating the new dentry.

Weird filesystems such as this will be rejected by overlayfs at a later stage during setup, but to prevent such a warning, call ovl_mkdir_real() directly from ovl_workdir_create() and reject this case early.

---
 fs/overlayfs/dir.c       |    3 +--
 fs/overlayfs/overlayfs.h |    1 +
 fs/overlayfs/super.c     |   12 ++++++++----
 3 files changed, 10 insertions(+), 6 deletions(-)

@@ -116,8 +116,7 @@ kill_whiteout:
 	goto out;
 }
 
-static int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry,
-			  umode_t mode)
+int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry, umode_t mode)
 {
 	int err;
 	struct dentry *d, *dentry = *newdentry;

@@ -402,6 +402,7 @@ struct ovl_cattr {
 
 #define OVL_CATTR(m) (&(struct ovl_cattr) { .mode = (m) })
 
+int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry, umode_t mode);
 struct dentry *ovl_create_real(struct inode *dir, struct dentry *newdentry,
 			       struct ovl_cattr *attr);
 int ovl_cleanup(struct inode *dir, struct dentry *dentry);

@@ -654,10 +654,14 @@ retry:
 			goto retry;
 		}
 
-		work = ovl_create_real(dir, work, OVL_CATTR(attr.ia_mode));
-		err = PTR_ERR(work);
-		if (IS_ERR(work))
-			goto out_err;
+		err = ovl_mkdir_real(dir, &work, attr.ia_mode);
+		if (err)
+			goto out_dput;
+
+		/* Weird filesystem returning with hashed negative (kernfs)? */
+		err = -EINVAL;
+		if (d_really_is_negative(work))
+			goto out_dput;
 
 		/*
 		 * Try to remove POSIX ACL xattrs from workdir.  We are good if:

From: George Kennedy <[email protected]>

commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream.

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032

CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
 <TASK>
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

---
 drivers/scsi/scsi_debug.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -2300,11 +2300,11 @@ static int resp_mode_select(struct scsi_
 			    __func__, param_len, res);
 	md_len = mselect6 ? (arr[0] + 1) : (get_unaligned_be16(arr + 0) + 2);
 	bd_len = mselect6 ? arr[3] : get_unaligned_be16(arr + 6);
-	if (md_len > 2) {
+	off = bd_len + (mselect6 ? 4 : 8);
+	if (md_len > 2 || off >= res) {
 		mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
 		return check_condition_result;
 	}
-	off = bd_len + (mselect6 ? 4 : 8);
 	mpage = arr[off] & 0x3f;
 	ps = !!(arr[off] & 0x80);
 	if (ps) {

From: Juergen Gross <[email protected]>

commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream.

The Xen blkfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels.

This is part of XSA-391

---
 drivers/block/xen-blkfront.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

@@ -1565,9 +1565,12 @@ static irqreturn_t blkif_interrupt(int i
 	unsigned long flags;
 	struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
 	struct blkfront_info *info = rinfo->dev_info;
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
 
-	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
+	if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) {
+		xen_irq_lateeoi(irq, XEN_EOI_FLAG_SPURIOUS);
 		return IRQ_HANDLED;
+	}
 
 	spin_lock_irqsave(&rinfo->ring_lock, flags);
  again:

@@ -1583,6 +1586,8 @@ static irqreturn_t blkif_interrupt(int i
 		unsigned long id;
 		unsigned int op;
 
+		eoiflag = 0;
+
 		RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
 		id = bret.id;
 

@@ -1698,6 +1703,8 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_unlock_irqrestore(&rinfo->ring_lock, flags);
 
+	xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 
  err:

@@ -1705,6 +1712,8 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_unlock_irqrestore(&rinfo->ring_lock, flags);
 
+	/* No EOI in order to avoid further interrupts. */
+
 	pr_alert("%s disabled for further use\n", info->gd->disk_name);
 	return IRQ_HANDLED;
 }

@@ -1744,8 +1753,8 @@ static int setup_blkring(struct xenbus_d
 	if (err)
 		goto fail;
 
-	err = bind_evtchn_to_irqhandler(rinfo->evtchn, blkif_interrupt, 0,
-					"blkif", rinfo);
+	err = bind_evtchn_to_irqhandler_lateeoi(rinfo->evtchn, blkif_interrupt,
+						0, "blkif", rinfo);
 	if (err <= 0) {
 		xenbus_dev_fatal(dev, err,
 				 "bind_evtchn_to_irqhandler failed");

From: Juergen Gross <[email protected]>

commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream.

The Xen netfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels.

For being able to detect the case of no rx responses being added while the carrier is down a new lock is needed in order to update and test rsp_cons and the number of seen unconsumed responses atomically.

This is part of XSA-391

---
 drivers/net/xen-netfront.c |  125 +++++++++++++++++++++++++++++++++------------
 1 file changed, 94 insertions(+), 31 deletions(-)

@@ -142,6 +142,9 @@ struct netfront_queue {
 	struct sk_buff *rx_skbs[NET_RX_RING_SIZE];
 	grant_ref_t gref_rx_head;
 	grant_ref_t grant_rx_ref[NET_RX_RING_SIZE];
+
+	unsigned int rx_rsp_unconsumed;
+	spinlock_t rx_cons_lock;
 };
 
 struct netfront_info {

@@ -366,12 +369,13 @@ static int xennet_open(struct net_device
 	return 0;
 }
 
-static void xennet_tx_buf_gc(struct netfront_queue *queue)
+static bool xennet_tx_buf_gc(struct netfront_queue *queue)
 {
 	RING_IDX cons, prod;
 	unsigned short id;
 	struct sk_buff *skb;
 	bool more_to_do;
+	bool work_done = false;
 	const struct device *dev = &queue->info->netdev->dev;
 
 	BUG_ON(!netif_carrier_ok(queue->info->netdev));

@@ -388,6 +392,8 @@ static void xennet_tx_buf_gc(struct netf
 		for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
 			struct xen_netif_tx_response txrsp;
 
+			work_done = true;
+
 			RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
 			if (txrsp.status == XEN_NETIF_RSP_NULL)
 				continue;

@@ -431,11 +437,13 @@ static void xennet_tx_buf_gc(struct netf
 
 	xennet_maybe_wake_tx(queue);
 
-	return;
+	return work_done;
 
  err:
 	queue->info->broken = true;
 	dev_alert(dev, "Disabled for further use\n");
+
+	return work_done;
 }
 
 struct xennet_gnttab_make_txreq {

@@ -756,6 +764,16 @@ static int xennet_close(struct net_devic
 	return 0;
 }
 
+static void xennet_set_rx_rsp_cons(struct netfront_queue *queue, RING_IDX val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->rx_cons_lock, flags);
+	queue->rx.rsp_cons = val;
+	queue->rx_rsp_unconsumed = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+	spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+}
+
 static void xennet_move_rx_slot(struct netfront_queue *queue, struct sk_buff *skb,
 				grant_ref_t ref)
 {

@@ -807,7 +825,7 @@ static int xennet_get_extras(struct netf
 		xennet_move_rx_slot(queue, skb, ref);
 	} while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
 
-	queue->rx.rsp_cons = cons;
+	xennet_set_rx_rsp_cons(queue, cons);
 	return err;
 }
 

@@ -887,7 +905,7 @@ next:
 	}
 
 	if (unlikely(err))
-		queue->rx.rsp_cons = cons + slots;
+		xennet_set_rx_rsp_cons(queue, cons + slots);
 
 	return err;
 }

@@ -941,7 +959,8 @@ static int xennet_fill_frags(struct netf
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
-			queue->rx.rsp_cons = ++cons + skb_queue_len(list);
+			xennet_set_rx_rsp_cons(queue,
+					       ++cons + skb_queue_len(list));
 			kfree_skb(nskb);
 			return -ENOENT;
 		}

@@ -954,7 +973,7 @@ static int xennet_fill_frags(struct netf
 		kfree_skb(nskb);
 	}
 
-	queue->rx.rsp_cons = cons;
+	xennet_set_rx_rsp_cons(queue, cons);
 
 	return 0;
 }

@@ -1075,7 +1094,9 @@ err:
 
 			if (unlikely(xennet_set_skb_gso(skb, gso))) {
 				__skb_queue_head(&tmpq, skb);
-				queue->rx.rsp_cons += skb_queue_len(&tmpq);
+				xennet_set_rx_rsp_cons(queue,
+						       queue->rx.rsp_cons +
+						       skb_queue_len(&tmpq));
 				goto err;
 			}
 		}

@@ -1099,7 +1120,8 @@ err:
 
 		__skb_queue_tail(&rxq, skb);
 
-		i = ++queue->rx.rsp_cons;
+		i = queue->rx.rsp_cons + 1;
+		xennet_set_rx_rsp_cons(queue, i);
 		work_done++;
 	}
 

@@ -1261,40 +1283,79 @@ static int xennet_set_features(struct ne
 	return 0;
 }
 
-static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_tx(struct netfront_queue *queue, unsigned int *eoi)
 {
-	struct netfront_queue *queue = dev_id;
 	unsigned long flags;
 
-	if (queue->info->broken)
-		return IRQ_HANDLED;
+	if (unlikely(queue->info->broken))
+		return false;
 
 	spin_lock_irqsave(&queue->tx_lock, flags);
-	xennet_tx_buf_gc(queue);
+	if (xennet_tx_buf_gc(queue))
+		*eoi = 0;
 	spin_unlock_irqrestore(&queue->tx_lock, flags);
 
+	return true;
+}
+
+static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+{
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (likely(xennet_handle_tx(dev_id, &eoiflag)))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_rx(struct netfront_queue *queue, unsigned int *eoi)
 {
-	struct netfront_queue *queue = dev_id;
-	struct net_device *dev = queue->info->netdev;
+	unsigned int work_queued;
+	unsigned long flags;
+
+	if (unlikely(queue->info->broken))
+		return false;
 
-	if (queue->info->broken)
-		return IRQ_HANDLED;
+	spin_lock_irqsave(&queue->rx_cons_lock, flags);
+	work_queued = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+	if (work_queued > queue->rx_rsp_unconsumed) {
+		queue->rx_rsp_unconsumed = work_queued;
+		*eoi = 0;
+	} else if (unlikely(work_queued < queue->rx_rsp_unconsumed)) {
+		const struct device *dev = &queue->info->netdev->dev;
+
+		spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+		dev_alert(dev, "RX producer index going backwards\n");
+		dev_alert(dev, "Disabled for further use\n");
+		queue->info->broken = true;
+		return false;
+	}
+	spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
 
-	if (likely(netif_carrier_ok(dev) &&
-		   RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
+	if (likely(netif_carrier_ok(queue->info->netdev) && work_queued))
 		napi_schedule(&queue->napi);
 
+	return true;
+}
+
+static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+{
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (likely(xennet_handle_rx(dev_id, &eoiflag)))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t xennet_interrupt(int irq, void *dev_id)
 {
-	xennet_tx_interrupt(irq, dev_id);
-	xennet_rx_interrupt(irq, dev_id);
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (xennet_handle_tx(dev_id, &eoiflag) &&
+	    xennet_handle_rx(dev_id, &eoiflag))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 

@@ -1528,9 +1589,10 @@ static int setup_netfront_single(struct
 	if (err < 0)
 		goto fail;
 
-	err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
-					xennet_interrupt,
-					0, queue->info->netdev->name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+						xennet_interrupt, 0,
+						queue->info->netdev->name,
+						queue);
 	if (err < 0)
 		goto bind_fail;
 	queue->rx_evtchn = queue->tx_evtchn;

@@ -1558,18 +1620,18 @@ static int setup_netfront_split(struct n
 
 	snprintf(queue->tx_irq_name, sizeof(queue->tx_irq_name),
 		 "%s-tx", queue->name);
-	err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
-					xennet_tx_interrupt,
-					0, queue->tx_irq_name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+						xennet_tx_interrupt, 0,
+						queue->tx_irq_name, queue);
 	if (err < 0)
 		goto bind_tx_fail;
 	queue->tx_irq = err;
 
 	snprintf(queue->rx_irq_name, sizeof(queue->rx_irq_name),
 		 "%s-rx", queue->name);
-	err = bind_evtchn_to_irqhandler(queue->rx_evtchn,
-					xennet_rx_interrupt,
-					0, queue->rx_irq_name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->rx_evtchn,
+						xennet_rx_interrupt, 0,
+						queue->rx_irq_name, queue);
 	if (err < 0)
 		goto bind_rx_fail;
 	queue->rx_irq = err;

@@ -1671,6 +1733,7 @@ static int xennet_init_queue(struct netf
 
 	spin_lock_init(&queue->tx_lock);
 	spin_lock_init(&queue->rx_lock);
+	spin_lock_init(&queue->rx_cons_lock);
 
 	timer_setup(&queue->rx_refill_timer, rx_refill_timeout, 0);
 

From: Juergen Gross <[email protected]>

This is commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream.

The Xen console driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using a lateeoi event channel.

For the normal domU initial console this requires the introduction of bind_evtchn_to_irq_lateeoi() as there is no xenbus device available at the time the event channel is bound to the irq.

As the decision whether an interrupt was spurious or not requires to test for bytes having been read from the backend, move sending the event into the if statement, as sending an event without having found any bytes to be read is making no sense at all.

This is part of XSA-391

---
 drivers/tty/hvc/hvc_xen.c |   30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

@@ -37,6 +37,8 @@ struct xencons_info {
 	struct xenbus_device *xbdev;
 	struct xencons_interface *intf;
 	unsigned int evtchn;
+	XENCONS_RING_IDX out_cons;
+	unsigned int out_cons_same;
 	struct hvc_struct *hvc;
 	int irq;
 	int vtermno;

@@ -138,6 +140,8 @@ static int domU_read_console(uint32_t vt
 	XENCONS_RING_IDX cons, prod;
 	int recv = 0;
 	struct xencons_info *xencons = vtermno_to_xencons(vtermno);
+	unsigned int eoiflag = 0;
+
 	if (xencons == NULL)
 		return -EINVAL;
 	intf = xencons->intf;

@@ -157,7 +161,27 @@ static int domU_read_console(uint32_t vt
 	mb();			/* read ring before consuming */
 	intf->in_cons = cons;
 
-	notify_daemon(xencons);
+	/*
+	 * When to mark interrupt having been spurious:
+	 * - there was no new data to be read, and
+	 * - the backend did not consume some output bytes, and
+	 * - the previous round with no read data didn't see consumed bytes
+	 *   (we might have a race with an interrupt being in flight while
+	 *   updating xencons->out_cons, so account for that by allowing one
+	 *   round without any visible reason)
+	 */
+	if (intf->out_cons != xencons->out_cons) {
+		xencons->out_cons = intf->out_cons;
+		xencons->out_cons_same = 0;
+	}
+	if (recv) {
+		notify_daemon(xencons);
+	} else if (xencons->out_cons_same++ > 1) {
+		eoiflag = XEN_EOI_FLAG_SPURIOUS;
+	}
+
+	xen_irq_lateeoi(xencons->irq, eoiflag);
+
 	return recv;
 }
 

@@ -386,7 +410,7 @@ static int xencons_connect_backend(struc
 	if (ret)
 		return ret;
 	info->evtchn = evtchn;
-	irq = bind_evtchn_to_irq(evtchn);
+	irq = bind_interdomain_evtchn_to_irq_lateeoi(dev->otherend_id, evtchn);
 	if (irq < 0)
 		return irq;
 	info->irq = irq;

@@ -550,7 +574,7 @@ static int __init xen_hvc_init(void)
 			return r;
 
 		info = vtermno_to_xencons(HVC_COOKIE);
-		info->irq = bind_evtchn_to_irq(info->evtchn);
+		info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
 	}
 	if (info->irq < 0)
 		info->irq = 0; /* NO_IRQ */

From: Juergen Gross <[email protected]>

commit 6032046ec4b70176d247a71836186d47b25d1684 upstream.

Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") introduced a security problem in netback, as an interface would only be regarded to be stalled if no slot is available in the rx queue ring page. In case the SKB at the head of the queued requests will need more than one rx slot and only one slot is free the stall detection logic will never trigger, as the test for that is only looking for at least one slot to be free.

Fix that by testing for the needed number of slots instead of only one slot being available.

In order to not have to take the rx queue lock that often, store the number of needed slots in the queue data. As all SKB dequeue operations happen in the rx queue kernel thread this is safe, as long as the number of needed slots is accessed via READ/WRITE_ONCE() only and updates are always done with the rx queue lock held.

Add a small helper for obtaining the number of free slots.

This is part of XSA-392

---
 drivers/net/xen-netback/common.h |    1 
 drivers/net/xen-netback/rx.c     |   65 ++++++++++++++++++++++++---------------
 2 files changed, 42 insertions(+), 24 deletions(-)

@@ -203,6 +203,7 @@ struct xenvif_queue { /* Per-queue data
 	unsigned int rx_queue_max;
 	unsigned int rx_queue_len;
 	unsigned long last_rx_time;
+	unsigned int rx_slots_needed;
 	bool stalled;
 
 	struct xenvif_copy_state rx_copy;

From: Juergen Gross <[email protected]>

commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream.

In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations.

Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP.

When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case.

It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling.

This is part of XSA-392

---
 drivers/net/xen-netback/rx.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

@@ -88,16 +88,19 @@ void xenvif_rx_queue_tail(struct xenvif_
 
 	spin_lock_irqsave(&queue->rx_queue.lock, flags);
 
-	if (skb_queue_empty(&queue->rx_queue))
-		xenvif_update_needed_slots(queue, skb);
-
-	__skb_queue_tail(&queue->rx_queue, skb);
-
-	queue->rx_queue_len += skb->len;
-	if (queue->rx_queue_len > queue->rx_queue_max) {
+	if (queue->rx_queue_len >= queue->rx_queue_max) {
 		struct net_device *dev = queue->vif->dev;
 
 		netif_tx_stop_queue(netdev_get_tx_queue(dev, queue->id));
+		kfree_skb(skb);
+		queue->vif->dev->stats.rx_dropped++;
+	} else {
+		if (skb_queue_empty(&queue->rx_queue))
+			xenvif_update_needed_slots(queue, skb);
+
+		__skb_queue_tail(&queue->rx_queue, skb);
+
+		queue->rx_queue_len += skb->len;
 	}
 
 	spin_unlock_irqrestore(&queue->rx_queue.lock, flags);

@@ -147,6 +150,7 @@ static void xenvif_rx_queue_drop_expired
 			break;
 		xenvif_rx_dequeue(queue);
 		kfree_skb(skb);
+		queue->vif->dev->stats.rx_dropped++;
 	}
 }
 

All tests passing for Tegra ...

Test results for stable-v4.19:

    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version: 4.19.222-rc1-g2b0e0aea0c2a
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Hi Greg,

Build test:
mips (gcc version 11.2.1 20211214): 63 configs -> no failure arm (gcc version 11.2.1 20211214): 116 configs -> no new failure arm64 (gcc version 11.2.1 20211214): 2 configs -> no failure x86_64 (gcc version 11.2.1 20211214): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/533

--
Regards
Sudip