configs/stm32f469_disco_xip: remove BR2_LINUX_KERNEL_XZ
PATCH 1/2 configs/stm32f469_disco_xip: remove BR2_LINUX_KERNEL_XZ
This is a XIP kernel, so it shouldn't be compressed.
--- configs/stm32f469_disco_xip_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/stm32f469_disco_xip_defconfig +0 -1
@@ -7,7 +7,6 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32f469-disco/linux-xip.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y -BR2_LINUX_KERNEL_XZ=y BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
Signature · 6 lines
2.32.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/2 configs/stm32f469_disco_xip: explicitly set the kernel version
The version of the kernel and its headers must be explicitly set because if you keep the default setting, the kernel is continuously updated in buildroot with the risk that its image + dtb grow so much that it again exceeds the 2 MByte of the flash module.
--- configs/stm32f469_disco_xip_defconfig | 3 +++ 1 file changed, 3 insertions(+)
configs/stm32f469_disco_xip_defconfig +3 -0
@@ -1,9 +1,12 @@ BR2_arm=y BR2_cortex_m4=y +BR2_KERNEL_HEADERS_5_15=y # BR2_UCLIBC_INSTALL_UTILS is not set BR2_GCC_ENABLE_LTO=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh" BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32f469-disco/linux-xip.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
Signature · 6 lines
2.32.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 3 lines · Dario Binacchi
This is a XIP kernel, so it shouldn't be compressed.
Signed-off-by Dario Binacchi <[email protected]>
Both applied to master, thanks.
Regards,
Arnout
Quoted 10 lines
--- configs/stm32f469_disco_xip_defconfig | 1 - 1 file changed, 1 deletion(-)configs/stm32f469_disco_xip_defconfig +0
-0
configs/stm32f469_disco_xip_defconfig BR2_LINUX_KERNEL=y · line 12
Quoted 7 lines
configs/stm32f469_disco_xip_defconfig +0
-1@@ -7,7 +7,6 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32f469-disco/linux-xip.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y -BR2_LINUX_KERNEL_XZ=y BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="xipImage" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f469-disco"
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot